freebsd-skq/sys/dev/usb/quirk/usb_quirk.h
2010-02-14 19:56:05 +00:00

94 lines
3.7 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _USB_QUIRK_H_
#define _USB_QUIRK_H_
/* NOTE: UQ_NONE is not a valid quirk */
enum { /* keep in sync with usb_quirk_str table */
UQ_NONE,
UQ_MATCH_VENDOR_ONLY,
/* Various quirks */
UQ_AUDIO_SWAP_LR, /* left and right sound channels are swapped */
UQ_AU_INP_ASYNC, /* input is async despite claim of adaptive */
UQ_AU_NO_FRAC, /* don't adjust for fractional samples */
UQ_AU_NO_XU, /* audio device has broken extension unit */
UQ_BAD_ADC, /* bad audio spec version number */
UQ_BAD_AUDIO, /* device claims audio class, but isn't */
UQ_BROKEN_BIDIR, /* printer has broken bidir mode */
UQ_BUS_POWERED, /* device is bus powered, despite claim */
UQ_HID_IGNORE, /* device should be ignored by hid class */
UQ_KBD_IGNORE, /* device should be ignored by kbd class */
UQ_KBD_BOOTPROTO, /* device should set the boot protocol */
UQ_MS_BAD_CLASS, /* doesn't identify properly */
UQ_MS_LEADING_BYTE, /* mouse sends an unknown leading byte */
UQ_MS_REVZ, /* mouse has Z-axis reversed */
UQ_NO_STRINGS, /* string descriptors are broken */
UQ_OPEN_CLEARSTALL, /* device needs clear endpoint stall */
UQ_POWER_CLAIM, /* hub lies about power status */
UQ_SPUR_BUT_UP, /* spurious mouse button up events */
UQ_SWAP_UNICODE, /* has some Unicode strings swapped */
UQ_CFG_INDEX_1, /* select configuration index 1 by default */
UQ_CFG_INDEX_2, /* select configuration index 2 by default */
UQ_CFG_INDEX_3, /* select configuration index 3 by default */
UQ_CFG_INDEX_4, /* select configuration index 4 by default */
UQ_CFG_INDEX_0, /* select configuration index 0 by default */
UQ_ASSUME_CM_OVER_DATA, /* modem device breaks on cm over data */
/* USB Mass Storage Quirks. See "storage/umass.c" for a detailed description. */
UQ_MSC_NO_TEST_UNIT_READY,
UQ_MSC_NO_RS_CLEAR_UA,
UQ_MSC_NO_START_STOP,
UQ_MSC_NO_GETMAXLUN,
UQ_MSC_NO_INQUIRY,
UQ_MSC_NO_INQUIRY_EVPD,
UQ_MSC_NO_SYNC_CACHE,
UQ_MSC_SHUTTLE_INIT,
UQ_MSC_ALT_IFACE_1,
UQ_MSC_FLOPPY_SPEED,
UQ_MSC_IGNORE_RESIDUE,
UQ_MSC_WRONG_CSWSIG,
UQ_MSC_RBC_PAD_TO_12,
UQ_MSC_READ_CAP_OFFBY1,
UQ_MSC_FORCE_SHORT_INQ,
UQ_MSC_FORCE_WIRE_BBB,
UQ_MSC_FORCE_WIRE_CBI,
UQ_MSC_FORCE_WIRE_CBI_I,
UQ_MSC_FORCE_PROTO_SCSI,
UQ_MSC_FORCE_PROTO_ATAPI,
UQ_MSC_FORCE_PROTO_UFI,
UQ_MSC_FORCE_PROTO_RBC,
USB_QUIRK_MAX
};
uint8_t usb_test_quirk(const struct usb_attach_arg *uaa, uint16_t quirk);
#endif /* _USB_QUIRK_H_ */