freebsd-skq/sys/x86/acpica/srat.c
John Baldwin 6676877bd9 When performing a sanity check on the SRAT table to ensure that each
memory domain has an assigned CPU, ignore disabled CPUs.  Previously
disabled CPUs were counted as being in domain 0.

Reported by:	mdf
2010-07-29 17:37:35 +00:00

331 lines
8.6 KiB
C

/*-
* Copyright (c) 2010 Advanced Computing Technologies LLC
* Written by: John H. Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/smp.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_param.h>
#include <vm/vm_phys.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/actables.h>
#include <machine/intr_machdep.h>
#include <machine/apicvar.h>
#include <dev/acpica/acpivar.h>
struct cpu_info {
int enabled:1;
int has_memory:1;
int domain;
} cpus[MAX_APIC_ID + 1];
struct mem_affinity mem_info[VM_PHYSSEG_MAX + 1];
int num_mem;
static ACPI_TABLE_SRAT *srat;
static vm_paddr_t srat_physaddr;
static void srat_walk_table(acpi_subtable_handler *handler, void *arg);
static void
srat_parse_entry(ACPI_SUBTABLE_HEADER *entry, void *arg)
{
ACPI_SRAT_CPU_AFFINITY *cpu;
ACPI_SRAT_X2APIC_CPU_AFFINITY *x2apic;
ACPI_SRAT_MEM_AFFINITY *mem;
int domain, i, slot;
switch (entry->Type) {
case ACPI_SRAT_TYPE_CPU_AFFINITY:
cpu = (ACPI_SRAT_CPU_AFFINITY *)entry;
domain = cpu->ProximityDomainLo |
cpu->ProximityDomainHi[0] << 8 |
cpu->ProximityDomainHi[1] << 16 |
cpu->ProximityDomainHi[2] << 24;
if (bootverbose)
printf("SRAT: Found CPU APIC ID %u domain %d: %s\n",
cpu->ApicId, domain,
(cpu->Flags & ACPI_SRAT_CPU_ENABLED) ?
"enabled" : "disabled");
if (!(cpu->Flags & ACPI_SRAT_CPU_ENABLED))
break;
KASSERT(!cpus[cpu->ApicId].enabled,
("Duplicate local APIC ID %u", cpu->ApicId));
cpus[cpu->ApicId].domain = domain;
cpus[cpu->ApicId].enabled = 1;
break;
case ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY:
x2apic = (ACPI_SRAT_X2APIC_CPU_AFFINITY *)entry;
if (bootverbose)
printf("SRAT: Found CPU APIC ID %u domain %d: %s\n",
x2apic->ApicId, x2apic->ProximityDomain,
(x2apic->Flags & ACPI_SRAT_CPU_ENABLED) ?
"enabled" : "disabled");
if (!(x2apic->Flags & ACPI_SRAT_CPU_ENABLED))
break;
KASSERT(!cpus[x2apic->ApicId].enabled,
("Duplicate local APIC ID %u", x2apic->ApicId));
cpus[x2apic->ApicId].domain = x2apic->ProximityDomain;
cpus[x2apic->ApicId].enabled = 1;
break;
case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
mem = (ACPI_SRAT_MEM_AFFINITY *)entry;
if (bootverbose)
printf(
"SRAT: Found memory domain %d addr %jx len %jx: %s\n",
mem->ProximityDomain, (uintmax_t)mem->BaseAddress,
(uintmax_t)mem->Length,
(mem->Flags & ACPI_SRAT_MEM_ENABLED) ?
"enabled" : "disabled");
if (!(mem->Flags & ACPI_SRAT_MEM_ENABLED))
break;
if (num_mem == VM_PHYSSEG_MAX) {
printf("SRAT: Too many memory regions\n");
*(int *)arg = ENXIO;
break;
}
slot = num_mem;
for (i = 0; i < num_mem; i++) {
if (mem_info[i].end <= mem->BaseAddress)
continue;
if (mem_info[i].start <
(mem->BaseAddress + mem->Length)) {
printf("SRAT: Overlapping memory entries\n");
*(int *)arg = ENXIO;
return;
}
slot = i;
}
for (i = num_mem; i > slot; i--)
mem_info[i] = mem_info[i - 1];
mem_info[slot].start = mem->BaseAddress;
mem_info[slot].end = mem->BaseAddress + mem->Length;
mem_info[slot].domain = mem->ProximityDomain;
num_mem++;
break;
}
}
/*
* Ensure each memory domain has at least one CPU and that each CPU
* has at least one memory domain.
*/
static int
check_domains(void)
{
int found, i, j;
for (i = 0; i < num_mem; i++) {
found = 0;
for (j = 0; j <= MAX_APIC_ID; j++)
if (cpus[j].enabled &&
cpus[j].domain == mem_info[i].domain) {
cpus[j].has_memory = 1;
found++;
}
if (!found) {
printf("SRAT: No CPU found for memory domain %d\n",
mem_info[i].domain);
return (ENXIO);
}
}
for (i = 0; i <= MAX_APIC_ID; i++)
if (cpus[i].enabled && !cpus[i].has_memory) {
printf("SRAT: No memory found for CPU %d\n", i);
return (ENXIO);
}
return (0);
}
/*
* Check that the SRAT memory regions cover all of the regions in
* phys_avail[].
*/
static int
check_phys_avail(void)
{
vm_paddr_t address;
int i, j;
/* j is the current offset into phys_avail[]. */
address = phys_avail[0];
j = 0;
for (i = 0; i < num_mem; i++) {
/*
* Consume as many phys_avail[] entries as fit in this
* region.
*/
while (address >= mem_info[i].start &&
address <= mem_info[i].end) {
/*
* If we cover the rest of this phys_avail[] entry,
* advance to the next entry.
*/
if (phys_avail[j + 1] <= mem_info[i].end) {
j += 2;
if (phys_avail[j] == 0 &&
phys_avail[j + 1] == 0) {
return (0);
}
address = phys_avail[j];
} else
address = mem_info[i].end + 1;
}
}
printf("SRAT: No memory region found for %jx - %jx\n",
(uintmax_t)phys_avail[j], (uintmax_t)phys_avail[j + 1]);
return (ENXIO);
}
/*
* Renumber the memory domains to be compact and zero-based if not
* already.
*/
static void
renumber_domains(void)
{
int domains[VM_PHYSSEG_MAX];
int ndomain, i, j, slot;
/* Enumerate all the domains. */
ndomain = 0;
for (i = 0; i < num_mem; i++) {
/* See if this domain is already known. */
for (j = 0; j < ndomain; j++) {
if (domains[j] >= mem_info[i].domain)
break;
}
if (j < ndomain && domains[j] == mem_info[i].domain)
continue;
/* Insert the new domain at slot 'j'. */
slot = j;
for (j = ndomain; j > slot; j--)
domains[j] = domains[j - 1];
domains[slot] = mem_info[i].domain;
}
/* Renumber each domain to its index in the sorted 'domains' list. */
for (i = 0; i < ndomain; i++) {
/*
* If the domain is already the right value, no need
* to renumber.
*/
if (domains[i] == i)
continue;
/* Walk the cpu[] and mem_info[] arrays to renumber. */
for (j = 0; j < num_mem; j++)
if (mem_info[j].domain == domains[i])
mem_info[j].domain = i;
for (j = 0; j <= MAX_APIC_ID; j++)
if (cpus[j].enabled && cpus[j].domain == domains[i])
cpus[j].domain = i;
}
}
/*
* Look for an ACPI System Resource Affinity Table ("SRAT")
*/
static void
parse_srat(void *dummy)
{
int error;
if (resource_disabled("srat", 0))
return;
srat_physaddr = acpi_find_table(ACPI_SIG_SRAT);
if (srat_physaddr == 0)
return;
/*
* Make a pass over the table to populate the cpus[] and
* mem_info[] tables.
*/
srat = acpi_map_table(srat_physaddr, ACPI_SIG_SRAT);
error = 0;
srat_walk_table(srat_parse_entry, &error);
acpi_unmap_table(srat);
srat = NULL;
if (error || check_domains() != 0 || check_phys_avail() != 0) {
srat_physaddr = 0;
return;
}
renumber_domains();
/* Point vm_phys at our memory affinity table. */
mem_affinity = mem_info;
}
SYSINIT(parse_srat, SI_SUB_VM - 1, SI_ORDER_FIRST, parse_srat, NULL);
static void
srat_walk_table(acpi_subtable_handler *handler, void *arg)
{
acpi_walk_subtables(srat + 1, (char *)srat + srat->Header.Length,
handler, arg);
}
/*
* Setup per-CPU ACPI IDs.
*/
static void
srat_set_cpus(void *dummy)
{
struct cpu_info *cpu;
struct pcpu *pc;
u_int i;
if (srat_physaddr == 0)
return;
for (i = 0; i < MAXCPU; i++) {
if (CPU_ABSENT(i))
continue;
pc = pcpu_find(i);
KASSERT(pc != NULL, ("no pcpu data for CPU %u", i));
cpu = &cpus[pc->pc_apic_id];
if (!cpu->enabled)
panic("SRAT: CPU with APIC ID %u is not known",
pc->pc_apic_id);
pc->pc_domain = cpu->domain;
if (bootverbose)
printf("SRAT: CPU %u has memory domain %d\n", i,
cpu->domain);
}
}
SYSINIT(srat_set_cpus, SI_SUB_CPU, SI_ORDER_ANY, srat_set_cpus, NULL);