ian 86596b2682 Make it possible to run ntpd as a non-root user, add ntpd uid and gid. ... Code analysis and runtime analysis using truss(8) indicate that the only privileged operations performed by ntpd are adjusting system time, and (re-)binding to privileged UDP port 123. These changes add a new mac(4) policy module, mac_ntpd(4), which grants just those privileges to any process running with uid 123. This also adds a new user and group, ntpd:ntpd, (uid:gid 123:123), and makes them the owner of the /var/db/ntp directory, so that it can be used as a location where the non-privileged daemon can write files such as the driftfile, and any optional logfile or stats files. Because there are so many ways to configure ntpd, the question of how to configure it to run without root privs can be a bit complex, so that will be addressed in a separate commit. These changes are just what's required to grant the limited subset of privs to ntpd, and the small change to ntpd to prevent it from exiting with an error if running as non-root. Differential Revision: https://reviews.freebsd.org/D16281		2018-07-19 23:55:29 +00:00
..
autofs	etc: clean up trailing whitespace in autofs	2018-02-15 11:41:38 +00:00
bluetooth
cron.d	Conditionally handle the crontab entry for atrun(8)	2017-05-18 06:33:55 +00:00
defaults	geli attach multiple providers	2018-06-26 18:07:16 +00:00
devd	Fix quoting in sending the NOMATCH event to devmatch	2018-06-28 15:00:18 +00:00
etc.aarch64	For video consoles, only launch a getty if the device exists.	2018-05-09 20:49:00 +00:00
etc.amd64	For video consoles, only launch a getty if the device exists.	2018-05-09 20:49:00 +00:00
etc.arm	For video consoles, only launch a getty if the device exists.	2018-05-09 20:49:00 +00:00
etc.i386	For video consoles, only launch a getty if the device exists.	2018-05-09 20:49:00 +00:00
etc.mips	Enable all callin ttys if the tty is an available console.	2015-10-20 16:10:46 +00:00
etc.powerpc	For video consoles, only launch a getty if the device exists.	2018-05-09 20:49:00 +00:00
etc.riscv	For video consoles, only launch a getty if the device exists.	2018-05-09 20:49:00 +00:00
etc.sparc64	For video consoles, only launch a getty if the device exists.	2018-05-09 20:49:00 +00:00
gss
mail	Replace send-mail with the more standarized sendmail, we do not create	2017-12-27 06:23:50 +00:00
mtree	Make it possible to run ntpd as a non-root user, add ntpd uid and gid.	2018-07-19 23:55:29 +00:00
newsyslog.conf.d	Handle the logfiles in newsyslog and syslogd conditionally, based on	2017-05-13 03:10:50 +00:00
ntp	Replace the leap-seconds file in r320242 from USNO -	2017-06-23 01:05:49 +00:00
pam.d	various: general adoption of SPDX licensing ID tags.	2017-11-27 15:37:16 +00:00
periodic	filter all passwords (not only changed) from periodic passwd backup	2017-11-21 20:31:54 +00:00
pkg
rc.d	When being verbose about various leapfile versions, also mention expiration.	2018-06-28 22:13:32 +00:00
root	Fix typo introduced in r320672 - check for existence of the right file.	2017-07-05 15:42:33 +00:00
sendmail	Only create /var/log/sendmail.st if start sendmail.	2018-06-06 01:51:05 +00:00
syslog.d	Handle the logfiles in newsyslog and syslogd conditionally, based on	2017-05-13 03:10:50 +00:00
amd.map
apmd.conf
auto_master	Stop appending "noatime" in the autofs -media map, and instead add it	2016-09-20 04:52:01 +00:00
blacklistd.conf	Add basic blacklist build support	2016-06-02 19:06:04 +00:00
crontab	Set the $PATH in /etc/crontab like it is set by the cron(8)	2018-06-10 02:13:30 +00:00
csh.cshrc
csh.login
csh.logout
ddb.conf
devd.conf	User service foo rather than /etc/rc.d/foo.	2018-06-11 22:48:34 +00:00
devfs.conf
dhclient.conf
disktab
fbtab
freebsd-update.conf
ftpusers
gettytab
group	Make it possible to run ntpd as a non-root user, add ntpd uid and gid.	2018-07-19 23:55:29 +00:00
hosts
hosts.allow
hosts.equiv
hosts.lpd
inetd.conf	Remove rcmds.	2017-10-06 08:43:14 +00:00
libalias.conf
libmap.conf
login.access
login.conf	Fix handling of umtxp resource limit in sh(1)/ulimit(1), limits(1), add	2016-03-12 14:54:34 +00:00
mac.conf
Makefile	WITHOUT_SERVICESDB:	2018-07-04 17:18:35 +00:00
Makefile.depend	META MODE: Update dependencies with 'the-lot' and add missing directories.	2015-12-01 05:23:19 +00:00
master.passwd	Make it possible to run ntpd as a non-root user, add ntpd uid and gid.	2018-07-19 23:55:29 +00:00
minfree
motd
netconfig
netstart	Remove NATM configuration bits and assorted NATM and ATM remnants.	2017-04-25 21:59:34 +00:00
network.subr	Reduce code duplication for wlan(4) interface creation in network.subr.	2017-11-19 20:18:21 +00:00
networks
newsyslog.conf	[etc] Update newsyslog.conf default comment	2018-05-03 00:57:19 +00:00
nls.alias
nscd.conf
nsmb.conf
nsswitch.conf	Implement an NSS backend for netgroups and add getnetgrent_r(3).	2016-06-09 01:28:44 +00:00
ntp.conf	Fix a comment; the ntp leaplist file is updated periodically, but not weekly	2018-06-24 03:31:23 +00:00
opieaccess
pccard_ether	Do not try to recreate wlan(4) interface if it already exists.	2016-12-04 15:58:34 +00:00
pf.os	pf.os: Add OpenBSD:6.1	2017-12-02 06:23:02 +00:00
phones
portsnap.conf	userland: Fix several typos and minor errors	2017-12-27 03:23:01 +00:00
printcap	Update several more URLs	2017-10-29 08:17:03 +00:00
profile
protocols	etc: minor spelling fixes.	2016-05-01 16:43:22 +00:00
rc	Fix firstboot fs mount logic	2018-02-06 20:12:05 +00:00
rc.bsdextended
rc.firewall	The firewall_type is ignored if not set in rc.conf or rc.conf.local,	2018-02-22 08:25:39 +00:00
rc.initdiskless	userland: Fix several typos and minor errors	2017-12-27 03:23:01 +00:00
rc.resume
rc.sendmail
rc.shutdown	Since r275359, there is no need to provide a bogus service name.	2015-10-26 15:16:27 +00:00
rc.subr	rc.subr: Support loading environmental variables from a file	2018-05-25 19:36:26 +00:00
rc.suspend
regdomain.xml	Correct Russia spelling in regdomain.xml	2018-02-05 18:45:21 +00:00
remote
rpc
services	Add VXLAN (RFC 7348) port	2017-12-31 17:11:12 +00:00
shells
snmpd.config	Move the mibII module up so uncommenting the bridge module works	2017-01-07 09:03:40 +00:00
sysctl.conf
syslog.conf	Handle the logfiles in newsyslog and syslogd conditionally, based on	2017-05-13 03:10:50 +00:00
termcap.small