freebsd-skq/sys/dev/ena/ena_sysctl.c
Marcin Wojtas f180142c76 Add ENI metrics for the ENA driver
The new HAL allows the driver to read extra ENI stats. Exact meaning of
each of them can be found in base/ena_defs/ena_admin_defs.h file and
structure ena_admin_eni_stats.

Those stats are being updated inside of the timer service, which is
executed every second.
ENI metrics are turned off by default. They can be enabled, using the
sysctl node: dev.ena.X.eni_metrics.update_delay
0 value in this node means that the update is turned off. Other values
determine how many seconds must pass, before ENI metrics will be
updated.

They can be acquired, using sysctl:

sysctl dev.ena.X.eni_metrics

Where X stands for the interface number.

Submitted by:   Michal Krawczyk <mk@semihalf.com>
Obtained from:  Semihalf
Sponsored by:   Amazon, Inc
MFC after:      1 week
Differential revision: https://reviews.freebsd.org/D27118
2020-11-18 15:17:55 +00:00

559 lines
19 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2015-2020 Amazon.com, Inc. or its affiliates.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "ena_sysctl.h"
static void ena_sysctl_add_wd(struct ena_adapter *);
static void ena_sysctl_add_stats(struct ena_adapter *);
static void ena_sysctl_add_eni_metrics(struct ena_adapter *);
static void ena_sysctl_add_tuneables(struct ena_adapter *);
static int ena_sysctl_buf_ring_size(SYSCTL_HANDLER_ARGS);
static int ena_sysctl_rx_queue_size(SYSCTL_HANDLER_ARGS);
static int ena_sysctl_io_queues_nb(SYSCTL_HANDLER_ARGS);
static int ena_sysctl_eni_metrics_interval(SYSCTL_HANDLER_ARGS);
/* Limit max ENI sample rate to be an hour. */
#define ENI_METRICS_MAX_SAMPLE_INTERVAL 3600
static SYSCTL_NODE(_hw, OID_AUTO, ena, CTLFLAG_RD | CTLFLAG_MPSAFE, 0,
"ENA driver parameters");
/*
* Logging level for changing verbosity of the output
*/
int ena_log_level = ENA_ALERT | ENA_WARNING;
SYSCTL_INT(_hw_ena, OID_AUTO, log_level, CTLFLAG_RWTUN,
&ena_log_level, 0, "Logging level indicating verbosity of the logs");
SYSCTL_CONST_STRING(_hw_ena, OID_AUTO, driver_version, CTLFLAG_RD,
DRV_MODULE_VERSION, "ENA driver version");
/*
* Use 9k mbufs for the Rx buffers. Default to 0 (use page size mbufs instead).
* Using 9k mbufs in low memory conditions might cause allocation to take a lot
* of time and lead to the OS instability as it needs to look for the contiguous
* pages.
* However, page size mbufs has a bit smaller throughput than 9k mbufs, so if
* the network performance is the priority, the 9k mbufs can be used.
*/
int ena_enable_9k_mbufs = 0;
SYSCTL_INT(_hw_ena, OID_AUTO, enable_9k_mbufs, CTLFLAG_RDTUN,
&ena_enable_9k_mbufs, 0, "Use 9 kB mbufs for Rx descriptors");
void
ena_sysctl_add_nodes(struct ena_adapter *adapter)
{
ena_sysctl_add_wd(adapter);
ena_sysctl_add_stats(adapter);
ena_sysctl_add_eni_metrics(adapter);
ena_sysctl_add_tuneables(adapter);
}
static void
ena_sysctl_add_wd(struct ena_adapter *adapter)
{
device_t dev;
struct sysctl_ctx_list *ctx;
struct sysctl_oid *tree;
struct sysctl_oid_list *child;
dev = adapter->pdev;
ctx = device_get_sysctl_ctx(dev);
tree = device_get_sysctl_tree(dev);
child = SYSCTL_CHILDREN(tree);
/* Sysctl calls for Watchdog service */
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "wd_active",
CTLFLAG_RWTUN, &adapter->wd_active, 0,
"Watchdog is active");
SYSCTL_ADD_QUAD(ctx, child, OID_AUTO, "keep_alive_timeout",
CTLFLAG_RWTUN, &adapter->keep_alive_timeout,
"Timeout for Keep Alive messages");
SYSCTL_ADD_QUAD(ctx, child, OID_AUTO, "missing_tx_timeout",
CTLFLAG_RWTUN, &adapter->missing_tx_timeout,
"Timeout for TX completion");
SYSCTL_ADD_U32(ctx, child, OID_AUTO, "missing_tx_max_queues",
CTLFLAG_RWTUN, &adapter->missing_tx_max_queues, 0,
"Number of TX queues to check per run");
SYSCTL_ADD_U32(ctx, child, OID_AUTO, "missing_tx_threshold",
CTLFLAG_RWTUN, &adapter->missing_tx_threshold, 0,
"Max number of timeouted packets");
}
static void
ena_sysctl_add_stats(struct ena_adapter *adapter)
{
device_t dev;
struct ena_ring *tx_ring;
struct ena_ring *rx_ring;
struct ena_hw_stats *hw_stats;
struct ena_stats_dev *dev_stats;
struct ena_stats_tx *tx_stats;
struct ena_stats_rx *rx_stats;
struct ena_com_stats_admin *admin_stats;
struct sysctl_ctx_list *ctx;
struct sysctl_oid *tree;
struct sysctl_oid_list *child;
struct sysctl_oid *queue_node, *tx_node, *rx_node, *hw_node;
struct sysctl_oid *admin_node;
struct sysctl_oid_list *queue_list, *tx_list, *rx_list, *hw_list;
struct sysctl_oid_list *admin_list;
#define QUEUE_NAME_LEN 32
char namebuf[QUEUE_NAME_LEN];
int i;
dev = adapter->pdev;
ctx = device_get_sysctl_ctx(dev);
tree = device_get_sysctl_tree(dev);
child = SYSCTL_CHILDREN(tree);
tx_ring = adapter->tx_ring;
rx_ring = adapter->rx_ring;
hw_stats = &adapter->hw_stats;
dev_stats = &adapter->dev_stats;
admin_stats = &adapter->ena_dev->admin_queue.stats;
SYSCTL_ADD_COUNTER_U64(ctx, child, OID_AUTO, "wd_expired",
CTLFLAG_RD, &dev_stats->wd_expired,
"Watchdog expiry count");
SYSCTL_ADD_COUNTER_U64(ctx, child, OID_AUTO, "interface_up",
CTLFLAG_RD, &dev_stats->interface_up,
"Network interface up count");
SYSCTL_ADD_COUNTER_U64(ctx, child, OID_AUTO, "interface_down",
CTLFLAG_RD, &dev_stats->interface_down,
"Network interface down count");
SYSCTL_ADD_COUNTER_U64(ctx, child, OID_AUTO, "admin_q_pause",
CTLFLAG_RD, &dev_stats->admin_q_pause,
"Admin queue pauses");
for (i = 0; i < adapter->num_io_queues; ++i, ++tx_ring, ++rx_ring) {
snprintf(namebuf, QUEUE_NAME_LEN, "queue%d", i);
queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO,
namebuf, CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "Queue Name");
queue_list = SYSCTL_CHILDREN(queue_node);
/* TX specific stats */
tx_node = SYSCTL_ADD_NODE(ctx, queue_list, OID_AUTO,
"tx_ring", CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "TX ring");
tx_list = SYSCTL_CHILDREN(tx_node);
tx_stats = &tx_ring->tx_stats;
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"count", CTLFLAG_RD,
&tx_stats->cnt, "Packets sent");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"bytes", CTLFLAG_RD,
&tx_stats->bytes, "Bytes sent");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"prepare_ctx_err", CTLFLAG_RD,
&tx_stats->prepare_ctx_err,
"TX buffer preparation failures");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"dma_mapping_err", CTLFLAG_RD,
&tx_stats->dma_mapping_err, "DMA mapping failures");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"doorbells", CTLFLAG_RD,
&tx_stats->doorbells, "Queue doorbells");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"missing_tx_comp", CTLFLAG_RD,
&tx_stats->missing_tx_comp, "TX completions missed");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"bad_req_id", CTLFLAG_RD,
&tx_stats->bad_req_id, "Bad request id count");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"mbuf_collapses", CTLFLAG_RD,
&tx_stats->collapse,
"Mbuf collapse count");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"mbuf_collapse_err", CTLFLAG_RD,
&tx_stats->collapse_err,
"Mbuf collapse failures");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"queue_wakeups", CTLFLAG_RD,
&tx_stats->queue_wakeup, "Queue wakeups");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"queue_stops", CTLFLAG_RD,
&tx_stats->queue_stop, "Queue stops");
SYSCTL_ADD_COUNTER_U64(ctx, tx_list, OID_AUTO,
"llq_buffer_copy", CTLFLAG_RD,
&tx_stats->llq_buffer_copy,
"Header copies for llq transaction");
/* RX specific stats */
rx_node = SYSCTL_ADD_NODE(ctx, queue_list, OID_AUTO,
"rx_ring", CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "RX ring");
rx_list = SYSCTL_CHILDREN(rx_node);
rx_stats = &rx_ring->rx_stats;
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"count", CTLFLAG_RD,
&rx_stats->cnt, "Packets received");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"bytes", CTLFLAG_RD,
&rx_stats->bytes, "Bytes received");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"refil_partial", CTLFLAG_RD,
&rx_stats->refil_partial, "Partial refilled mbufs");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"bad_csum", CTLFLAG_RD,
&rx_stats->bad_csum, "Bad RX checksum");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"mbuf_alloc_fail", CTLFLAG_RD,
&rx_stats->mbuf_alloc_fail, "Failed mbuf allocs");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"mjum_alloc_fail", CTLFLAG_RD,
&rx_stats->mjum_alloc_fail, "Failed jumbo mbuf allocs");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"dma_mapping_err", CTLFLAG_RD,
&rx_stats->dma_mapping_err, "DMA mapping errors");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"bad_desc_num", CTLFLAG_RD,
&rx_stats->bad_desc_num, "Bad descriptor count");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"bad_req_id", CTLFLAG_RD,
&rx_stats->bad_req_id, "Bad request id count");
SYSCTL_ADD_COUNTER_U64(ctx, rx_list, OID_AUTO,
"empty_rx_ring", CTLFLAG_RD,
&rx_stats->empty_rx_ring, "RX descriptors depletion count");
}
/* Stats read from device */
hw_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "hw_stats",
CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "Statistics from hardware");
hw_list = SYSCTL_CHILDREN(hw_node);
SYSCTL_ADD_COUNTER_U64(ctx, hw_list, OID_AUTO, "rx_packets", CTLFLAG_RD,
&hw_stats->rx_packets, "Packets received");
SYSCTL_ADD_COUNTER_U64(ctx, hw_list, OID_AUTO, "tx_packets", CTLFLAG_RD,
&hw_stats->tx_packets, "Packets transmitted");
SYSCTL_ADD_COUNTER_U64(ctx, hw_list, OID_AUTO, "rx_bytes", CTLFLAG_RD,
&hw_stats->rx_bytes, "Bytes received");
SYSCTL_ADD_COUNTER_U64(ctx, hw_list, OID_AUTO, "tx_bytes", CTLFLAG_RD,
&hw_stats->tx_bytes, "Bytes transmitted");
SYSCTL_ADD_COUNTER_U64(ctx, hw_list, OID_AUTO, "rx_drops", CTLFLAG_RD,
&hw_stats->rx_drops, "Receive packet drops");
SYSCTL_ADD_COUNTER_U64(ctx, hw_list, OID_AUTO, "tx_drops", CTLFLAG_RD,
&hw_stats->tx_drops, "Transmit packet drops");
/* ENA Admin queue stats */
admin_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "admin_stats",
CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "ENA Admin Queue statistics");
admin_list = SYSCTL_CHILDREN(admin_node);
SYSCTL_ADD_U64(ctx, admin_list, OID_AUTO, "aborted_cmd", CTLFLAG_RD,
&admin_stats->aborted_cmd, 0, "Aborted commands");
SYSCTL_ADD_U64(ctx, admin_list, OID_AUTO, "sumbitted_cmd", CTLFLAG_RD,
&admin_stats->submitted_cmd, 0, "Submitted commands");
SYSCTL_ADD_U64(ctx, admin_list, OID_AUTO, "completed_cmd", CTLFLAG_RD,
&admin_stats->completed_cmd, 0, "Completed commands");
SYSCTL_ADD_U64(ctx, admin_list, OID_AUTO, "out_of_space", CTLFLAG_RD,
&admin_stats->out_of_space, 0, "Queue out of space");
SYSCTL_ADD_U64(ctx, admin_list, OID_AUTO, "no_completion", CTLFLAG_RD,
&admin_stats->no_completion, 0, "Commands not completed");
}
static void
ena_sysctl_add_eni_metrics(struct ena_adapter *adapter)
{
device_t dev;
struct ena_admin_eni_stats *eni_metrics;
struct sysctl_ctx_list *ctx;
struct sysctl_oid *tree;
struct sysctl_oid_list *child;
struct sysctl_oid *eni_node;
struct sysctl_oid_list *eni_list;
dev = adapter->pdev;
ctx = device_get_sysctl_ctx(dev);
tree = device_get_sysctl_tree(dev);
child = SYSCTL_CHILDREN(tree);
eni_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "eni_metrics",
CTLFLAG_RD | CTLFLAG_MPSAFE, NULL, "ENA's ENI metrics");
eni_list = SYSCTL_CHILDREN(eni_node);
eni_metrics = &adapter->eni_metrics;
SYSCTL_ADD_U64(ctx, eni_list, OID_AUTO, "bw_in_allowance_exceeded",
CTLFLAG_RD, &eni_metrics->bw_in_allowance_exceeded, 0,
"Inbound BW allowance exceeded");
SYSCTL_ADD_U64(ctx, eni_list, OID_AUTO, "bw_out_allowance_exceeded",
CTLFLAG_RD, &eni_metrics->bw_out_allowance_exceeded, 0,
"Outbound BW allowance exceeded");
SYSCTL_ADD_U64(ctx, eni_list, OID_AUTO, "pps_allowance_exceeded",
CTLFLAG_RD, &eni_metrics->pps_allowance_exceeded, 0,
"PPS allowance exceeded");
SYSCTL_ADD_U64(ctx, eni_list, OID_AUTO, "conntrack_allowance_exceeded",
CTLFLAG_RD, &eni_metrics->conntrack_allowance_exceeded, 0,
"Connection tracking allowance exceeded");
SYSCTL_ADD_U64(ctx, eni_list, OID_AUTO, "linklocal_allowance_exceeded",
CTLFLAG_RD, &eni_metrics->linklocal_allowance_exceeded, 0,
"Linklocal packet rate allowance exceeded");
/*
* Tuneable, which determines how often ENI metrics will be read.
* 0 means it's turned off. Maximum allowed value is limited by:
* ENI_METRICS_MAX_SAMPLE_INTERVAL.
*/
SYSCTL_ADD_PROC(ctx, eni_list, OID_AUTO, "sample_interval",
CTLTYPE_U16 | CTLFLAG_RW | CTLFLAG_MPSAFE, adapter, 0,
ena_sysctl_eni_metrics_interval, "SU",
"Interval in seconds for updating ENI emetrics. 0 turns off the update.");
}
static void
ena_sysctl_add_tuneables(struct ena_adapter *adapter)
{
device_t dev;
struct sysctl_ctx_list *ctx;
struct sysctl_oid *tree;
struct sysctl_oid_list *child;
dev = adapter->pdev;
ctx = device_get_sysctl_ctx(dev);
tree = device_get_sysctl_tree(dev);
child = SYSCTL_CHILDREN(tree);
/* Tuneable number of buffers in the buf-ring (drbr) */
SYSCTL_ADD_PROC(ctx, child, OID_AUTO, "buf_ring_size",
CTLTYPE_U32 | CTLFLAG_RW | CTLFLAG_MPSAFE, adapter, 0,
ena_sysctl_buf_ring_size, "I",
"Size of the Tx buffer ring (drbr).");
/* Tuneable number of the Rx ring size */
SYSCTL_ADD_PROC(ctx, child, OID_AUTO, "rx_queue_size",
CTLTYPE_U32 | CTLFLAG_RW | CTLFLAG_MPSAFE, adapter, 0,
ena_sysctl_rx_queue_size, "I",
"Size of the Rx ring. The size should be a power of 2.");
/* Tuneable number of IO queues */
SYSCTL_ADD_PROC(ctx, child, OID_AUTO, "io_queues_nb",
CTLTYPE_U32 | CTLFLAG_RW | CTLFLAG_MPSAFE, adapter, 0,
ena_sysctl_io_queues_nb, "I", "Number of IO queues.");
}
static int
ena_sysctl_buf_ring_size(SYSCTL_HANDLER_ARGS)
{
struct ena_adapter *adapter = arg1;
uint32_t val;
int error;
val = 0;
error = sysctl_wire_old_buffer(req, sizeof(val));
if (error == 0) {
val = adapter->buf_ring_size;
error = sysctl_handle_32(oidp, &val, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
if (!powerof2(val) || val == 0) {
device_printf(adapter->pdev,
"Requested new Tx buffer ring size (%u) is not a power of 2\n",
val);
return (EINVAL);
}
if (val != adapter->buf_ring_size) {
device_printf(adapter->pdev,
"Requested new Tx buffer ring size: %d. Old size: %d\n",
val, adapter->buf_ring_size);
error = ena_update_buf_ring_size(adapter, val);
} else {
device_printf(adapter->pdev,
"New Tx buffer ring size is the same as already used: %u\n",
adapter->buf_ring_size);
}
return (error);
}
static int
ena_sysctl_rx_queue_size(SYSCTL_HANDLER_ARGS)
{
struct ena_adapter *adapter = arg1;
uint32_t val;
int error;
val = 0;
error = sysctl_wire_old_buffer(req, sizeof(val));
if (error == 0) {
val = adapter->requested_rx_ring_size;
error = sysctl_handle_32(oidp, &val, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
if (val < ENA_MIN_RING_SIZE || val > adapter->max_rx_ring_size) {
device_printf(adapter->pdev,
"Requested new Rx queue size (%u) is out of range: [%u, %u]\n",
val, ENA_MIN_RING_SIZE, adapter->max_rx_ring_size);
return (EINVAL);
}
/* Check if the parameter is power of 2 */
if (!powerof2(val)) {
device_printf(adapter->pdev,
"Requested new Rx queue size (%u) is not a power of 2\n",
val);
return (EINVAL);
}
if (val != adapter->requested_rx_ring_size) {
device_printf(adapter->pdev,
"Requested new Rx queue size: %u. Old size: %u\n",
val, adapter->requested_rx_ring_size);
error = ena_update_queue_size(adapter,
adapter->requested_tx_ring_size, val);
} else {
device_printf(adapter->pdev,
"New Rx queue size is the same as already used: %u\n",
adapter->requested_rx_ring_size);
}
return (error);
}
/*
* Change number of effectively used IO queues adapter->num_io_queues
*/
static int
ena_sysctl_io_queues_nb(SYSCTL_HANDLER_ARGS)
{
struct ena_adapter *adapter = arg1;
uint32_t tmp = 0;
int error;
error = sysctl_wire_old_buffer(req, sizeof(tmp));
if (error == 0) {
tmp = adapter->num_io_queues;
error = sysctl_handle_int(oidp, &tmp, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
if (tmp == 0) {
device_printf(adapter->pdev,
"Requested number of IO queues is zero\n");
return (EINVAL);
}
/*
* The adapter::max_num_io_queues is the HW capability. The system
* resources availability may potentially be a tighter limit. Therefore
* the relation `adapter::max_num_io_queues >= adapter::msix_vecs`
* always holds true, while the `adapter::msix_vecs` is variable across
* device reset (`ena_destroy_device()` + `ena_restore_device()`).
*/
if (tmp > (adapter->msix_vecs - ENA_ADMIN_MSIX_VEC)) {
device_printf(adapter->pdev,
"Requested number of IO queues is higher than maximum "
"allowed (%u)\n", adapter->msix_vecs - ENA_ADMIN_MSIX_VEC);
return (EINVAL);
}
if (tmp == adapter->num_io_queues) {
device_printf(adapter->pdev,
"Requested number of IO queues is equal to current value "
"(%u)\n", adapter->num_io_queues);
} else {
device_printf(adapter->pdev,
"Requested new number of IO queues: %u, current value: "
"%u\n", tmp, adapter->num_io_queues);
error = ena_update_io_queue_nb(adapter, tmp);
}
return (error);
}
static int
ena_sysctl_eni_metrics_interval(SYSCTL_HANDLER_ARGS)
{
struct ena_adapter *adapter = arg1;
uint16_t interval;
int error;
error = sysctl_wire_old_buffer(req, sizeof(interval));
if (error == 0) {
interval = adapter->eni_metrics_sample_interval;
error = sysctl_handle_16(oidp, &interval, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
if (interval > ENI_METRICS_MAX_SAMPLE_INTERVAL) {
device_printf(adapter->pdev,
"ENI metrics update interval is out of range - maximum allowed value: %d seconds\n",
ENI_METRICS_MAX_SAMPLE_INTERVAL);
return (EINVAL);
}
if (interval == 0) {
device_printf(adapter->pdev,
"ENI metrics update is now turned off\n");
bzero(&adapter->eni_metrics, sizeof(adapter->eni_metrics));
} else {
device_printf(adapter->pdev,
"ENI metrics update interval is set to: %"PRIu16" seconds\n",
interval);
}
adapter->eni_metrics_sample_interval = interval;
return (0);
}