freebsd-skq/sys/arm/at91/at91_mcireg.h
Warner Losh 82645a84eb Tweak the disclaimer section of the license to match COPYRIGHT, for
better or worse.  Ok'd by folks that have additional copyrights to the
files in cases where there's joint authorship.
2008-11-25 00:13:26 +00:00

130 lines
7.9 KiB
C

/*-
* Copyright (c) 2006 Berndt Walter. All rights reserved.
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef ARM_AT91_AT91_MCIREG_H
#define ARM_AT91_AT91_MCIREG_H
#define MMC_MAX 30
#define MCI_CR 0x00 /* MCI Control Register */
#define MCI_MR 0x04 /* MCI Mode Register */
#define MCI_DTOR 0x08 /* MCI Data Timeout Register */
#define MCI_SDCR 0x0c /* MCI SD Card Register */
#define MCI_ARGR 0x10 /* MCI Argument Register */
#define MCI_CMDR 0x14 /* MCI Command Register */
#define MCI_RSPR 0x20 /* MCI Response Registers - 4 of them */
#define MCI_RDR 0x30 /* MCI Receive Data Register */
#define MCI_TDR 0x34 /* MCI Transmit Data Register */
#define MCI_SR 0x40 /* MCI Status Register */
#define MCI_IER 0x44 /* MCI Interrupt Enable Register */
#define MCI_IDR 0x48 /* MCI Interrupt Disable Register */
#define MCI_IMR 0x4c /* MCI Interrupt Mask Register */
/* -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- */
#define MCI_CR_MCIEN (0x1u << 0) /* (MCI) Multimedia Interface Enable */
#define MCI_CR_MCIDIS (0x1u << 1) /* (MCI) Multimedia Interface Disable */
#define MCI_CR_PWSEN (0x1u << 2) /* (MCI) Power Save Mode Enable */
#define MCI_CR_PWSDIS (0x1u << 3) /* (MCI) Power Save Mode Disable */
#define MCI_CR_SWRST (0x1u << 7) /* (MCI) Software Reset */
/* -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- */
#define MCI_MR_CLKDIV (0xffu << 0) /* (MCI) Clock Divider */
#define MCI_MR_PWSDIV (0x3fu << 8) /* (MCI) Power Saving Divider */
#define MCI_MR_PDCPADV (0x1u << 14) /* (MCI) PDC Padding Value */
#define MCI_MR_PDCMODE (0x1u << 15) /* (MCI) PDC Oriented Mode */
#define MCI_MR_BLKLEN 0x3fff0000ul /* (MCI) Data Block Length */
/* -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- */
#define MCI_DTOR_DTOCYC (0xfu << 0) /* (MCI) Data Timeout Cycle Number */
#define MCI_DTOR_DTOMUL (0x7u << 4) /* (MCI) Data Timeout Multiplier */
#define MCI_DTOR_DTOMUL_1 (0x0u << 4) /* (MCI) DTOCYC x 1 */
#define MCI_DTOR_DTOMUL_16 (0x1u << 4) /* (MCI) DTOCYC x 16 */
#define MCI_DTOR_DTOMUL_128 (0x2u << 4) /* (MCI) DTOCYC x 128 */
#define MCI_DTOR_DTOMUL_256 (0x3u << 4) /* (MCI) DTOCYC x 256 */
#define MCI_DTOR_DTOMUL_1k (0x4u << 4) /* (MCI) DTOCYC x 1024 */
#define MCI_DTOR_DTOMUL_4k (0x5u << 4) /* (MCI) DTOCYC x 4096 */
#define MCI_DTOR_DTOMUL_64k (0x6u << 4) /* (MCI) DTOCYC x 65536 */
#define MCI_DTOR_DTOMUL_1M (0x7u << 4) /* (MCI) DTOCYC x 1048576 */
/* -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- */
#define MCI_SDCR_SDCSEL (0x1u << 0) /* (MCI) SD Card Selector */
#define MCI_SDCR_SDCBUS (0x1u << 7) /* (MCI) SD Card Bus Width */
/* -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- */
#define MCI_CMDR_CMDNB (0x1Fu << 0) /* (MCI) Command Number */
#define MCI_CMDR_RSPTYP (0x3u << 6) /* (MCI) Response Type */
#define MCI_CMDR_RSPTYP_NO (0x0u << 6) /* (MCI) No response */
#define MCI_CMDR_RSPTYP_48 (0x1u << 6) /* (MCI) 48-bit response */
#define MCI_CMDR_RSPTYP_136 (0x2u << 6) /* (MCI) 136-bit response */
#define MCI_CMDR_SPCMD (0x7u << 8) /* (MCI) Special CMD */
#define MCI_CMDR_SPCMD_NONE (0x0u << 8) /* (MCI) Not a special CMD */
#define MCI_CMDR_SPCMD_INIT (0x1u << 8) /* (MCI) Initialization CMD */
#define MCI_CMDR_SPCMD_SYNC (0x2u << 8) /* (MCI) Synchronized CMD */
#define MCI_CMDR_SPCMD_IT_CMD (0x4u << 8) /* (MCI) Interrupt command */
#define MCI_CMDR_SPCMD_IT_REP (0x5u << 8) /* (MCI) Interrupt response */
#define MCI_CMDR_OPDCMD (0x1u << 11) /* (MCI) Open Drain Command */
#define MCI_CMDR_MAXLAT (0x1u << 12) /* (MCI) Maximum Latency for Command to respond */
#define MCI_CMDR_TRCMD (0x3u << 16) /* (MCI) Transfer CMD */
#define MCI_CMDR_TRCMD_NO (0x0u << 16) /* (MCI) No transfer */
#define MCI_CMDR_TRCMD_START (0x1u << 16) /* (MCI) Start transfer */
#define MCI_CMDR_TRCMD_STOP (0x2u << 16) /* (MCI) Stop transfer */
#define MCI_CMDR_TRDIR (0x1u << 18) /* (MCI) Transfer Direction */
#define MCI_CMDR_TRTYP (0x3u << 19) /* (MCI) Transfer Type */
#define MCI_CMDR_TRTYP_BLOCK (0x0u << 19) /* (MCI) Block Transfer type */
#define MCI_CMDR_TRTYP_MULTIPLE (0x1u << 19) /* (MCI) Multiple Block transfer type */
#define MCI_CMDR_TRTYP_STREAM (0x2u << 19) /* (MCI) Stream transfer type */
/* -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- */
#define MCI_SR_CMDRDY (0x1u << 0) /* (MCI) Command Ready flag */
#define MCI_SR_RXRDY (0x1u << 1) /* (MCI) RX Ready flag */
#define MCI_SR_TXRDY (0x1u << 2) /* (MCI) TX Ready flag */
#define MCI_SR_BLKE (0x1u << 3) /* (MCI) Data Block Transfer Ended flag */
#define MCI_SR_DTIP (0x1u << 4) /* (MCI) Data Transfer in Progress flag */
#define MCI_SR_NOTBUSY (0x1u << 5) /* (MCI) Data Line Not Busy flag */
#define MCI_SR_ENDRX (0x1u << 6) /* (MCI) End of RX Buffer flag */
#define MCI_SR_ENDTX (0x1u << 7) /* (MCI) End of TX Buffer flag */
#define MCI_SR_RXBUFF (0x1u << 14) /* (MCI) RX Buffer Full flag */
#define MCI_SR_TXBUFE (0x1u << 15) /* (MCI) TX Buffer Empty flag */
#define MCI_SR_RINDE (0x1u << 16) /* (MCI) Response Index Error flag */
#define MCI_SR_RDIRE (0x1u << 17) /* (MCI) Response Direction Error flag */
#define MCI_SR_RCRCE (0x1u << 18) /* (MCI) Response CRC Error flag */
#define MCI_SR_RENDE (0x1u << 19) /* (MCI) Response End Bit Error flag */
#define MCI_SR_RTOE (0x1u << 20) /* (MCI) Response Time-out Error flag */
#define MCI_SR_DCRCE (0x1u << 21) /* (MCI) data CRC Error flag */
#define MCI_SR_DTOE (0x1u << 22) /* (MCI) Data timeout Error flag */
#define MCI_SR_OVRE (0x1u << 30) /* (MCI) Overrun flag */
#define MCI_SR_UNRE (0x1u << 31) /* (MCI) Underrun flag */
/* -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- */
/* -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- */
/* -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- */
#define MCI_SR_ERROR (MCI_SR_UNRE | MCI_SR_OVRE | MCI_SR_DTOE | \
MCI_SR_DCRCE | MCI_SR_RTOE | MCI_SR_RENDE | \
MCI_SR_RCRCE | MCI_SR_RDIRE | MCI_SR_RINDE)
#define AT91C_BUS_WIDTH_1BIT 0x00
#define AT91C_BUS_WIDTH_4BITS 0x02
#endif /* ARM_AT91_AT91_MCIREG_H */