e892b3fe36
constant and does not need to be modified. This also saves a small amount of RAM.
4221 lines
92 KiB
C
4221 lines
92 KiB
C
/* $FreeBSD$ */
|
|
/*-
|
|
* Copyright (c) 2012 Hans Petter Selasky. All rights reserved.
|
|
* Copyright (c) 2010-2011 Aleksandr Rybalko. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/*
|
|
* This file contains the driver for the DesignWare series USB 2.0 OTG
|
|
* Controller.
|
|
*/
|
|
|
|
/*
|
|
* LIMITATION: Drivers must be bound to all OUT endpoints in the
|
|
* active configuration for this driver to work properly. Blocking any
|
|
* OUT endpoint will block all OUT endpoints including the control
|
|
* endpoint. Usually this is not a problem.
|
|
*/
|
|
|
|
/*
|
|
* NOTE: Writing to non-existing registers appears to cause an
|
|
* internal reset.
|
|
*/
|
|
|
|
#ifdef USB_GLOBAL_INCLUDE_FILE
|
|
#include USB_GLOBAL_INCLUDE_FILE
|
|
#else
|
|
#include <sys/stdint.h>
|
|
#include <sys/stddef.h>
|
|
#include <sys/param.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/types.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
#include <sys/unistd.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/priv.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
|
|
#define USB_DEBUG_VAR dwc_otg_debug
|
|
|
|
#include <dev/usb/usb_core.h>
|
|
#include <dev/usb/usb_debug.h>
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_process.h>
|
|
#include <dev/usb/usb_transfer.h>
|
|
#include <dev/usb/usb_device.h>
|
|
#include <dev/usb/usb_hub.h>
|
|
#include <dev/usb/usb_util.h>
|
|
|
|
#include <dev/usb/usb_controller.h>
|
|
#include <dev/usb/usb_bus.h>
|
|
#endif /* USB_GLOBAL_INCLUDE_FILE */
|
|
|
|
#include <dev/usb/controller/dwc_otg.h>
|
|
#include <dev/usb/controller/dwc_otgreg.h>
|
|
|
|
#define DWC_OTG_BUS2SC(bus) \
|
|
((struct dwc_otg_softc *)(((uint8_t *)(bus)) - \
|
|
((uint8_t *)&(((struct dwc_otg_softc *)0)->sc_bus))))
|
|
|
|
#define DWC_OTG_PC2SC(pc) \
|
|
DWC_OTG_BUS2SC(USB_DMATAG_TO_XROOT((pc)->tag_parent)->bus)
|
|
|
|
#define DWC_OTG_MSK_GINT_ENABLED \
|
|
(GINTSTS_ENUMDONE | \
|
|
GINTSTS_USBRST | \
|
|
GINTSTS_USBSUSP | \
|
|
GINTSTS_IEPINT | \
|
|
GINTSTS_RXFLVL | \
|
|
GINTSTS_SESSREQINT | \
|
|
GINTMSK_OTGINTMSK | \
|
|
GINTMSK_HCHINTMSK | \
|
|
GINTSTS_PRTINT)
|
|
|
|
static int dwc_otg_use_hsic;
|
|
|
|
static SYSCTL_NODE(_hw_usb, OID_AUTO, dwc_otg, CTLFLAG_RW, 0, "USB DWC OTG");
|
|
|
|
SYSCTL_INT(_hw_usb_dwc_otg, OID_AUTO, use_hsic, CTLFLAG_RD | CTLFLAG_TUN,
|
|
&dwc_otg_use_hsic, 0, "DWC OTG uses HSIC interface");
|
|
TUNABLE_INT("hw.usb.dwc_otg.use_hsic", &dwc_otg_use_hsic);
|
|
|
|
#ifdef USB_DEBUG
|
|
static int dwc_otg_debug;
|
|
|
|
SYSCTL_INT(_hw_usb_dwc_otg, OID_AUTO, debug, CTLFLAG_RW,
|
|
&dwc_otg_debug, 0, "DWC OTG debug level");
|
|
#endif
|
|
|
|
#define DWC_OTG_INTR_ENDPT 1
|
|
|
|
/* prototypes */
|
|
|
|
static const struct usb_bus_methods dwc_otg_bus_methods;
|
|
static const struct usb_pipe_methods dwc_otg_device_non_isoc_methods;
|
|
static const struct usb_pipe_methods dwc_otg_device_isoc_methods;
|
|
|
|
static dwc_otg_cmd_t dwc_otg_setup_rx;
|
|
static dwc_otg_cmd_t dwc_otg_data_rx;
|
|
static dwc_otg_cmd_t dwc_otg_data_tx;
|
|
static dwc_otg_cmd_t dwc_otg_data_tx_sync;
|
|
|
|
static dwc_otg_cmd_t dwc_otg_host_setup_tx;
|
|
static dwc_otg_cmd_t dwc_otg_host_data_tx;
|
|
static dwc_otg_cmd_t dwc_otg_host_data_rx;
|
|
|
|
static void dwc_otg_device_done(struct usb_xfer *, usb_error_t);
|
|
static void dwc_otg_do_poll(struct usb_bus *);
|
|
static void dwc_otg_standard_done(struct usb_xfer *);
|
|
static void dwc_otg_root_intr(struct dwc_otg_softc *sc);
|
|
static void dwc_otg_interrupt_poll(struct dwc_otg_softc *sc);
|
|
|
|
/*
|
|
* Here is a configuration that the chip supports.
|
|
*/
|
|
static const struct usb_hw_ep_profile dwc_otg_ep_profile[1] = {
|
|
|
|
[0] = {
|
|
.max_in_frame_size = 64,/* fixed */
|
|
.max_out_frame_size = 64, /* fixed */
|
|
.is_simplex = 1,
|
|
.support_control = 1,
|
|
}
|
|
};
|
|
|
|
static void
|
|
dwc_otg_get_hw_ep_profile(struct usb_device *udev,
|
|
const struct usb_hw_ep_profile **ppf, uint8_t ep_addr)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
|
|
sc = DWC_OTG_BUS2SC(udev->bus);
|
|
|
|
if (ep_addr < sc->sc_dev_ep_max)
|
|
*ppf = &sc->sc_hw_ep_profile[ep_addr].usb;
|
|
else
|
|
*ppf = NULL;
|
|
}
|
|
|
|
static int
|
|
dwc_otg_init_fifo(struct dwc_otg_softc *sc, uint8_t mode)
|
|
{
|
|
struct dwc_otg_profile *pf;
|
|
uint32_t fifo_size;
|
|
uint32_t fifo_regs;
|
|
uint32_t tx_start;
|
|
uint8_t x;
|
|
|
|
fifo_size = sc->sc_fifo_size;
|
|
|
|
fifo_regs = 4 * (sc->sc_dev_ep_max + sc->sc_dev_in_ep_max);
|
|
|
|
if (fifo_size >= fifo_regs)
|
|
fifo_size -= fifo_regs;
|
|
else
|
|
fifo_size = 0;
|
|
|
|
/* split equally for IN and OUT */
|
|
fifo_size /= 2;
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_GRXFSIZ, fifo_size / 4);
|
|
|
|
/* align to 4-bytes */
|
|
fifo_size &= ~3;
|
|
|
|
tx_start = fifo_size;
|
|
|
|
if (fifo_size < 0x40) {
|
|
DPRINTFN(-1, "Not enough data space for EP0 FIFO.\n");
|
|
USB_BUS_UNLOCK(&sc->sc_bus);
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (mode == DWC_MODE_HOST) {
|
|
|
|
/* reset active endpoints */
|
|
sc->sc_active_rx_ep = 0;
|
|
|
|
fifo_size /= 2;
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_GNPTXFSIZ,
|
|
((fifo_size / 4) << 16) |
|
|
(tx_start / 4));
|
|
|
|
tx_start += fifo_size;
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPTXFSIZ,
|
|
((fifo_size / 4) << 16) |
|
|
(tx_start / 4));
|
|
|
|
for (x = 0; x != sc->sc_host_ch_max; x++) {
|
|
/* enable interrupts */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCINTMSK(x),
|
|
HCINT_STALL | HCINT_BBLERR |
|
|
HCINT_XACTERR |
|
|
HCINT_NAK | HCINT_ACK | HCINT_NYET |
|
|
HCINT_CHHLTD | HCINT_FRMOVRUN |
|
|
HCINT_DATATGLERR);
|
|
}
|
|
|
|
/* enable host channel interrupts */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HAINTMSK,
|
|
(1U << sc->sc_host_ch_max) - 1U);
|
|
}
|
|
|
|
if (mode == DWC_MODE_DEVICE) {
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_GNPTXFSIZ,
|
|
(0x10 << 16) | (tx_start / 4));
|
|
fifo_size -= 0x40;
|
|
tx_start += 0x40;
|
|
|
|
/* setup control endpoint profile */
|
|
sc->sc_hw_ep_profile[0].usb = dwc_otg_ep_profile[0];
|
|
|
|
/* reset active endpoints */
|
|
sc->sc_active_rx_ep = 1;
|
|
|
|
for (x = 1; x != sc->sc_dev_ep_max; x++) {
|
|
|
|
pf = sc->sc_hw_ep_profile + x;
|
|
|
|
pf->usb.max_out_frame_size = 1024 * 3;
|
|
pf->usb.is_simplex = 0; /* assume duplex */
|
|
pf->usb.support_bulk = 1;
|
|
pf->usb.support_interrupt = 1;
|
|
pf->usb.support_isochronous = 1;
|
|
pf->usb.support_out = 1;
|
|
|
|
if (x < sc->sc_dev_in_ep_max) {
|
|
uint32_t limit;
|
|
|
|
limit = (x == 1) ? DWC_OTG_MAX_TXN :
|
|
(DWC_OTG_MAX_TXN / 2);
|
|
|
|
if (fifo_size >= limit) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPTXF(x),
|
|
((limit / 4) << 16) |
|
|
(tx_start / 4));
|
|
tx_start += limit;
|
|
fifo_size -= limit;
|
|
pf->usb.max_in_frame_size = 0x200;
|
|
pf->usb.support_in = 1;
|
|
pf->max_buffer = limit;
|
|
|
|
} else if (fifo_size >= 0x80) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPTXF(x),
|
|
((0x80 / 4) << 16) | (tx_start / 4));
|
|
tx_start += 0x80;
|
|
fifo_size -= 0x80;
|
|
pf->usb.max_in_frame_size = 0x40;
|
|
pf->usb.support_in = 1;
|
|
|
|
} else {
|
|
pf->usb.is_simplex = 1;
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPTXF(x),
|
|
(0x0 << 16) | (tx_start / 4));
|
|
}
|
|
} else {
|
|
pf->usb.is_simplex = 1;
|
|
}
|
|
|
|
DPRINTF("FIFO%d = IN:%d / OUT:%d\n", x,
|
|
pf->usb.max_in_frame_size,
|
|
pf->usb.max_out_frame_size);
|
|
}
|
|
}
|
|
|
|
/* reset RX FIFO */
|
|
DWC_OTG_WRITE_4(sc, DOTG_GRSTCTL,
|
|
GRSTCTL_RXFFLSH);
|
|
|
|
if (mode != DWC_MODE_OTG) {
|
|
/* reset all TX FIFOs */
|
|
DWC_OTG_WRITE_4(sc, DOTG_GRSTCTL,
|
|
GRSTCTL_TXFIFO(0x10) |
|
|
GRSTCTL_TXFFLSH);
|
|
} else {
|
|
/* reset active endpoints */
|
|
sc->sc_active_rx_ep = 0;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_clocks_on(struct dwc_otg_softc *sc)
|
|
{
|
|
if (sc->sc_flags.clocks_off &&
|
|
sc->sc_flags.port_powered) {
|
|
|
|
DPRINTFN(5, "\n");
|
|
|
|
/* TODO - platform specific */
|
|
|
|
sc->sc_flags.clocks_off = 0;
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_clocks_off(struct dwc_otg_softc *sc)
|
|
{
|
|
if (!sc->sc_flags.clocks_off) {
|
|
|
|
DPRINTFN(5, "\n");
|
|
|
|
/* TODO - platform specific */
|
|
|
|
sc->sc_flags.clocks_off = 1;
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_pull_up(struct dwc_otg_softc *sc)
|
|
{
|
|
uint32_t temp;
|
|
|
|
/* pullup D+, if possible */
|
|
|
|
if (!sc->sc_flags.d_pulled_up &&
|
|
sc->sc_flags.port_powered) {
|
|
sc->sc_flags.d_pulled_up = 1;
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DCTL);
|
|
temp &= ~DCTL_SFTDISCON;
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCTL, temp);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_pull_down(struct dwc_otg_softc *sc)
|
|
{
|
|
uint32_t temp;
|
|
|
|
/* pulldown D+, if possible */
|
|
|
|
if (sc->sc_flags.d_pulled_up) {
|
|
sc->sc_flags.d_pulled_up = 0;
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DCTL);
|
|
temp |= DCTL_SFTDISCON;
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCTL, temp);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_enable_sof_irq(struct dwc_otg_softc *sc)
|
|
{
|
|
if (sc->sc_irq_mask & GINTSTS_SOF)
|
|
return;
|
|
sc->sc_irq_mask |= GINTSTS_SOF;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_resume_irq(struct dwc_otg_softc *sc)
|
|
{
|
|
if (sc->sc_flags.status_suspend) {
|
|
/* update status bits */
|
|
sc->sc_flags.status_suspend = 0;
|
|
sc->sc_flags.change_suspend = 1;
|
|
|
|
if (sc->sc_flags.status_device_mode) {
|
|
/*
|
|
* Disable resume interrupt and enable suspend
|
|
* interrupt:
|
|
*/
|
|
sc->sc_irq_mask &= ~GINTSTS_WKUPINT;
|
|
sc->sc_irq_mask |= GINTSTS_USBSUSP;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
}
|
|
|
|
/* complete root HUB interrupt endpoint */
|
|
dwc_otg_root_intr(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_suspend_irq(struct dwc_otg_softc *sc)
|
|
{
|
|
if (!sc->sc_flags.status_suspend) {
|
|
/* update status bits */
|
|
sc->sc_flags.status_suspend = 1;
|
|
sc->sc_flags.change_suspend = 1;
|
|
|
|
if (sc->sc_flags.status_device_mode) {
|
|
/*
|
|
* Disable suspend interrupt and enable resume
|
|
* interrupt:
|
|
*/
|
|
sc->sc_irq_mask &= ~GINTSTS_USBSUSP;
|
|
sc->sc_irq_mask |= GINTSTS_WKUPINT;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
}
|
|
|
|
/* complete root HUB interrupt endpoint */
|
|
dwc_otg_root_intr(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_wakeup_peer(struct dwc_otg_softc *sc)
|
|
{
|
|
if (!sc->sc_flags.status_suspend)
|
|
return;
|
|
|
|
DPRINTFN(5, "Remote wakeup\n");
|
|
|
|
if (sc->sc_flags.status_device_mode) {
|
|
uint32_t temp;
|
|
|
|
/* enable remote wakeup signalling */
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DCTL);
|
|
temp |= DCTL_RMTWKUPSIG;
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCTL, temp);
|
|
|
|
/* Wait 8ms for remote wakeup to complete. */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125);
|
|
|
|
temp &= ~DCTL_RMTWKUPSIG;
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCTL, temp);
|
|
} else {
|
|
/* enable USB port */
|
|
DWC_OTG_WRITE_4(sc, DOTG_PCGCCTL, 0);
|
|
|
|
/* wait 10ms */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 100);
|
|
|
|
/* resume port */
|
|
sc->sc_hprt_val |= HPRT_PRTRES;
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, sc->sc_hprt_val);
|
|
|
|
/* Wait 100ms for resume signalling to complete. */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 10);
|
|
|
|
/* clear suspend and resume */
|
|
sc->sc_hprt_val &= ~(HPRT_PRTSUSP | HPRT_PRTRES);
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, sc->sc_hprt_val);
|
|
|
|
/* Wait 4ms */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 250);
|
|
}
|
|
|
|
/* need to fake resume IRQ */
|
|
dwc_otg_resume_irq(sc);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_set_address(struct dwc_otg_softc *sc, uint8_t addr)
|
|
{
|
|
uint32_t temp;
|
|
|
|
DPRINTFN(5, "addr=%d\n", addr);
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DCFG);
|
|
temp &= ~DCFG_DEVADDR_SET(0x7F);
|
|
temp |= DCFG_DEVADDR_SET(addr);
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCFG, temp);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_common_rx_ack(struct dwc_otg_softc *sc)
|
|
{
|
|
DPRINTFN(5, "RX status clear\n");
|
|
|
|
/* enable RX FIFO level interrupt */
|
|
sc->sc_irq_mask |= GINTSTS_RXFLVL;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
|
|
/* clear cached status */
|
|
sc->sc_last_rx_status = 0;
|
|
}
|
|
|
|
static void
|
|
dwc_otg_clear_hcint(struct dwc_otg_softc *sc, uint8_t x)
|
|
{
|
|
uint32_t hcint;
|
|
|
|
hcint = DWC_OTG_READ_4(sc, DOTG_HCINT(x));
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCINT(x), hcint);
|
|
|
|
/* clear buffered interrupts */
|
|
sc->sc_chan_state[x].hcint = 0;
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_host_channel_wait(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint8_t x;
|
|
|
|
x = td->channel;
|
|
|
|
DPRINTF("CH=%d\n", x);
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
if (sc->sc_chan_state[x].wait_sof == 0) {
|
|
dwc_otg_clear_hcint(sc, x);
|
|
return (1); /* done */
|
|
}
|
|
|
|
if (x == 0)
|
|
return (0); /* wait */
|
|
|
|
/* find new disabled channel */
|
|
for (x = 1; x != sc->sc_host_ch_max; x++) {
|
|
|
|
if (sc->sc_chan_state[x].allocated)
|
|
continue;
|
|
if (sc->sc_chan_state[x].wait_sof != 0)
|
|
continue;
|
|
|
|
sc->sc_chan_state[td->channel].allocated = 0;
|
|
sc->sc_chan_state[x].allocated = 1;
|
|
|
|
if (sc->sc_chan_state[td->channel].suspended) {
|
|
sc->sc_chan_state[td->channel].suspended = 0;
|
|
sc->sc_chan_state[x].suspended = 1;
|
|
}
|
|
|
|
/* clear interrupts */
|
|
dwc_otg_clear_hcint(sc, x);
|
|
|
|
DPRINTF("CH=%d HCCHAR=0x%08x "
|
|
"HCSPLT=0x%08x\n", x, td->hcchar, td->hcsplt);
|
|
|
|
/* ack any pending messages */
|
|
if (sc->sc_last_rx_status != 0 &&
|
|
GRXSTSRD_CHNUM_GET(sc->sc_last_rx_status) == td->channel) {
|
|
/* get rid of message */
|
|
dwc_otg_common_rx_ack(sc);
|
|
}
|
|
|
|
/* move active channel */
|
|
sc->sc_active_rx_ep &= ~(1 << td->channel);
|
|
sc->sc_active_rx_ep |= (1 << x);
|
|
|
|
/* set channel */
|
|
td->channel = x;
|
|
|
|
return (1); /* new channel allocated */
|
|
}
|
|
return (0); /* wait */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_host_channel_alloc(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint8_t x;
|
|
uint8_t max_channel;
|
|
|
|
if (td->channel < DWC_OTG_MAX_CHANNELS)
|
|
return (0); /* already allocated */
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
if ((td->hcchar & HCCHAR_EPNUM_MASK) == 0) {
|
|
max_channel = 1;
|
|
x = 0;
|
|
} else {
|
|
max_channel = sc->sc_host_ch_max;
|
|
x = 1;
|
|
}
|
|
|
|
for (; x != max_channel; x++) {
|
|
|
|
if (sc->sc_chan_state[x].allocated)
|
|
continue;
|
|
if (sc->sc_chan_state[x].wait_sof != 0)
|
|
continue;
|
|
|
|
sc->sc_chan_state[x].allocated = 1;
|
|
|
|
/* clear interrupts */
|
|
dwc_otg_clear_hcint(sc, x);
|
|
|
|
DPRINTF("CH=%d HCCHAR=0x%08x "
|
|
"HCSPLT=0x%08x\n", x, td->hcchar, td->hcsplt);
|
|
|
|
/* set active channel */
|
|
sc->sc_active_rx_ep |= (1 << x);
|
|
|
|
/* set channel */
|
|
td->channel = x;
|
|
|
|
return (0); /* allocated */
|
|
}
|
|
return (1); /* busy */
|
|
}
|
|
|
|
static void
|
|
dwc_otg_host_channel_disable(struct dwc_otg_softc *sc, uint8_t x)
|
|
{
|
|
uint32_t hcchar;
|
|
if (sc->sc_chan_state[x].wait_sof != 0)
|
|
return;
|
|
hcchar = DWC_OTG_READ_4(sc, DOTG_HCCHAR(x));
|
|
if (hcchar & (HCCHAR_CHENA | HCCHAR_CHDIS)) {
|
|
/* disable channel */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCCHAR(x),
|
|
HCCHAR_CHENA | HCCHAR_CHDIS);
|
|
/* don't re-use channel until next SOF is transmitted */
|
|
sc->sc_chan_state[x].wait_sof = 2;
|
|
/* enable SOF interrupt */
|
|
dwc_otg_enable_sof_irq(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_host_channel_free(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint8_t x;
|
|
|
|
if (td->channel >= DWC_OTG_MAX_CHANNELS)
|
|
return; /* already freed */
|
|
|
|
/* free channel */
|
|
x = td->channel;
|
|
td->channel = DWC_OTG_MAX_CHANNELS;
|
|
|
|
DPRINTF("CH=%d\n", x);
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
dwc_otg_host_channel_disable(sc, x);
|
|
|
|
sc->sc_chan_state[x].allocated = 0;
|
|
sc->sc_chan_state[x].suspended = 0;
|
|
|
|
/* ack any pending messages */
|
|
if (sc->sc_last_rx_status != 0 &&
|
|
GRXSTSRD_CHNUM_GET(sc->sc_last_rx_status) == x) {
|
|
dwc_otg_common_rx_ack(sc);
|
|
}
|
|
|
|
/* clear active channel */
|
|
sc->sc_active_rx_ep &= ~(1 << x);
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_host_setup_tx(struct dwc_otg_td *td)
|
|
{
|
|
struct usb_device_request req __aligned(4);
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t hcint;
|
|
uint32_t hcchar;
|
|
|
|
if (dwc_otg_host_channel_alloc(td))
|
|
return (1); /* busy */
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
hcint = sc->sc_chan_state[td->channel].hcint;
|
|
|
|
DPRINTF("CH=%d ST=%d HCINT=0x%08x HCCHAR=0x%08x HCTSIZ=0x%08x\n",
|
|
td->channel, td->state, hcint,
|
|
DWC_OTG_READ_4(sc, DOTG_HCCHAR(td->channel)),
|
|
DWC_OTG_READ_4(sc, DOTG_HCTSIZ(td->channel)));
|
|
|
|
if (hcint & (HCINT_RETRY |
|
|
HCINT_ACK | HCINT_NYET)) {
|
|
/* give success bits priority over failure bits */
|
|
} else if (hcint & HCINT_STALL) {
|
|
DPRINTF("CH=%d STALL\n", td->channel);
|
|
td->error_stall = 1;
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
} else if (hcint & HCINT_ERRORS) {
|
|
DPRINTF("CH=%d ERROR\n", td->channel);
|
|
td->errcnt++;
|
|
if (td->hcsplt != 0 || td->errcnt >= 3) {
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
}
|
|
}
|
|
|
|
/* channel must be disabled before we can complete the transfer */
|
|
|
|
if (hcint & (HCINT_ERRORS | HCINT_RETRY |
|
|
HCINT_ACK | HCINT_NYET)) {
|
|
|
|
dwc_otg_host_channel_disable(sc, td->channel);
|
|
|
|
if (!(hcint & HCINT_ERRORS))
|
|
td->errcnt = 0;
|
|
}
|
|
|
|
switch (td->state) {
|
|
case DWC_CHAN_ST_START:
|
|
goto send_pkt;
|
|
|
|
case DWC_CHAN_ST_WAIT_ANE:
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->did_nak = 1;
|
|
goto send_pkt;
|
|
}
|
|
if (hcint & (HCINT_ACK | HCINT_NYET)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->offset += td->tx_bytes;
|
|
td->remainder -= td->tx_bytes;
|
|
td->toggle = 1;
|
|
return (0); /* complete */
|
|
}
|
|
break;
|
|
case DWC_CHAN_ST_WAIT_S_ANE:
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->did_nak = 1;
|
|
goto send_pkt;
|
|
}
|
|
if (hcint & (HCINT_ACK | HCINT_NYET)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
goto send_cpkt;
|
|
}
|
|
break;
|
|
case DWC_CHAN_ST_WAIT_C_ANE:
|
|
if (hcint & HCINT_NYET) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
goto send_cpkt;
|
|
}
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->did_nak = 1;
|
|
goto send_pkt;
|
|
}
|
|
if (hcint & HCINT_ACK) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->offset += td->tx_bytes;
|
|
td->remainder -= td->tx_bytes;
|
|
td->toggle = 1;
|
|
return (0); /* complete */
|
|
}
|
|
break;
|
|
case DWC_CHAN_ST_TX_PKT_SYNC:
|
|
goto send_pkt_sync;
|
|
default:
|
|
break;
|
|
}
|
|
return (1); /* busy */
|
|
|
|
send_pkt:
|
|
if (sizeof(req) != td->remainder) {
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
}
|
|
|
|
send_pkt_sync:
|
|
if (td->hcsplt != 0) {
|
|
uint32_t count;
|
|
|
|
count = DWC_OTG_READ_4(sc, DOTG_HFNUM) & 7;
|
|
/* check for not first microframe */
|
|
if (count != 0) {
|
|
/* enable SOF interrupt */
|
|
dwc_otg_enable_sof_irq(sc);
|
|
/* set state */
|
|
td->state = DWC_CHAN_ST_TX_PKT_SYNC;
|
|
dwc_otg_host_channel_free(td);
|
|
return (1); /* busy */
|
|
}
|
|
|
|
td->hcsplt &= ~HCSPLT_COMPSPLT;
|
|
td->state = DWC_CHAN_ST_WAIT_S_ANE;
|
|
} else {
|
|
td->state = DWC_CHAN_ST_WAIT_ANE;
|
|
}
|
|
|
|
usbd_copy_out(td->pc, 0, &req, sizeof(req));
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCTSIZ(td->channel),
|
|
(sizeof(req) << HCTSIZ_XFERSIZE_SHIFT) |
|
|
(1 << HCTSIZ_PKTCNT_SHIFT) |
|
|
(HCTSIZ_PID_SETUP << HCTSIZ_PID_SHIFT));
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCSPLT(td->channel), td->hcsplt);
|
|
|
|
hcchar = td->hcchar;
|
|
hcchar &= ~HCCHAR_EPDIR_IN;
|
|
|
|
/* must enable channel before writing data to FIFO */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCCHAR(td->channel), hcchar);
|
|
|
|
/* transfer data into FIFO */
|
|
bus_space_write_region_4(sc->sc_io_tag, sc->sc_io_hdl,
|
|
DOTG_DFIFO(td->channel), (uint32_t *)&req, sizeof(req) / 4);
|
|
|
|
/* store number of bytes transmitted */
|
|
td->tx_bytes = sizeof(req);
|
|
|
|
return (1); /* busy */
|
|
|
|
send_cpkt:
|
|
td->hcsplt |= HCSPLT_COMPSPLT;
|
|
td->state = DWC_CHAN_ST_WAIT_C_ANE;
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCTSIZ(td->channel),
|
|
(HCTSIZ_PID_SETUP << HCTSIZ_PID_SHIFT));
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCSPLT(td->channel), td->hcsplt);
|
|
|
|
hcchar = td->hcchar;
|
|
hcchar &= ~HCCHAR_EPDIR_IN;
|
|
|
|
/* must enable channel before writing data to FIFO */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCCHAR(td->channel), hcchar);
|
|
|
|
return (1); /* busy */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_setup_rx(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
struct usb_device_request req __aligned(4);
|
|
uint32_t temp;
|
|
uint16_t count;
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
/* check endpoint status */
|
|
|
|
if (sc->sc_last_rx_status == 0)
|
|
goto not_complete;
|
|
|
|
if (GRXSTSRD_CHNUM_GET(sc->sc_last_rx_status) != 0)
|
|
goto not_complete;
|
|
|
|
if ((sc->sc_last_rx_status & GRXSTSRD_DPID_MASK) !=
|
|
GRXSTSRD_DPID_DATA0) {
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto not_complete;
|
|
}
|
|
|
|
if ((sc->sc_last_rx_status & GRXSTSRD_PKTSTS_MASK) !=
|
|
GRXSTSRD_STP_DATA) {
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto not_complete;
|
|
}
|
|
|
|
DPRINTFN(5, "GRXSTSR=0x%08x\n", sc->sc_last_rx_status);
|
|
|
|
/* clear did stall */
|
|
td->did_stall = 0;
|
|
|
|
/* get the packet byte count */
|
|
count = GRXSTSRD_BCNT_GET(sc->sc_last_rx_status);
|
|
|
|
/* verify data length */
|
|
if (count != td->remainder) {
|
|
DPRINTFN(0, "Invalid SETUP packet "
|
|
"length, %d bytes\n", count);
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto not_complete;
|
|
}
|
|
if (count != sizeof(req)) {
|
|
DPRINTFN(0, "Unsupported SETUP packet "
|
|
"length, %d bytes\n", count);
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto not_complete;
|
|
}
|
|
|
|
/* copy in control request */
|
|
memcpy(&req, sc->sc_rx_bounce_buffer, sizeof(req));
|
|
|
|
/* copy data into real buffer */
|
|
usbd_copy_in(td->pc, 0, &req, sizeof(req));
|
|
|
|
td->offset = sizeof(req);
|
|
td->remainder = 0;
|
|
|
|
/* sneak peek the set address */
|
|
if ((req.bmRequestType == UT_WRITE_DEVICE) &&
|
|
(req.bRequest == UR_SET_ADDRESS)) {
|
|
/* must write address before ZLP */
|
|
dwc_otg_set_address(sc, req.wValue[0] & 0x7F);
|
|
}
|
|
|
|
/* don't send any data by default */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPTSIZ(0),
|
|
DXEPTSIZ_SET_NPKT(0) |
|
|
DXEPTSIZ_SET_NBYTES(0));
|
|
|
|
temp = sc->sc_in_ctl[0];
|
|
|
|
/* enable IN endpoint */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPCTL(0),
|
|
temp | DIEPCTL_EPENA);
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPCTL(0),
|
|
temp | DIEPCTL_SNAK);
|
|
|
|
/* reset IN endpoint buffer */
|
|
DWC_OTG_WRITE_4(sc, DOTG_GRSTCTL,
|
|
GRSTCTL_TXFIFO(0) |
|
|
GRSTCTL_TXFFLSH);
|
|
|
|
/* acknowledge RX status */
|
|
dwc_otg_common_rx_ack(sc);
|
|
return (0); /* complete */
|
|
|
|
not_complete:
|
|
/* abort any ongoing transfer, before enabling again */
|
|
|
|
temp = sc->sc_out_ctl[0];
|
|
|
|
temp |= DOEPCTL_EPENA |
|
|
DOEPCTL_SNAK;
|
|
|
|
/* enable OUT endpoint */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPCTL(0), temp);
|
|
|
|
if (!td->did_stall) {
|
|
td->did_stall = 1;
|
|
|
|
DPRINTFN(5, "stalling IN and OUT direction\n");
|
|
|
|
/* set stall after enabling endpoint */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPCTL(0),
|
|
temp | DOEPCTL_STALL);
|
|
|
|
temp = sc->sc_in_ctl[0];
|
|
|
|
/* set stall assuming endpoint is enabled */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPCTL(0),
|
|
temp | DIEPCTL_STALL);
|
|
}
|
|
|
|
/* setup number of buffers to receive */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPTSIZ(0),
|
|
DXEPTSIZ_SET_MULTI(3) |
|
|
DXEPTSIZ_SET_NPKT(1) |
|
|
DXEPTSIZ_SET_NBYTES(sizeof(req)));
|
|
|
|
return (1); /* not complete */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_host_rate_check(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint8_t ep_type;
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
ep_type = ((td->hcchar &
|
|
HCCHAR_EPTYPE_MASK) >> HCCHAR_EPTYPE_SHIFT);
|
|
|
|
if (sc->sc_chan_state[td->channel].suspended)
|
|
goto busy;
|
|
|
|
if (ep_type == UE_ISOCHRONOUS) {
|
|
if (td->tmr_val & 1)
|
|
td->hcchar |= HCCHAR_ODDFRM;
|
|
else
|
|
td->hcchar &= ~HCCHAR_ODDFRM;
|
|
td->tmr_val += td->tmr_res;
|
|
} else if (ep_type == UE_INTERRUPT) {
|
|
uint8_t delta;
|
|
|
|
delta = sc->sc_tmr_val - td->tmr_val;
|
|
if (delta >= 128)
|
|
goto busy;
|
|
td->tmr_val = sc->sc_tmr_val + td->tmr_res;
|
|
} else if (td->did_nak != 0) {
|
|
goto busy;
|
|
}
|
|
|
|
if (ep_type == UE_ISOCHRONOUS) {
|
|
td->toggle = 0;
|
|
} else if (td->set_toggle) {
|
|
td->set_toggle = 0;
|
|
td->toggle = 1;
|
|
}
|
|
return (0);
|
|
busy:
|
|
return (1);
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_host_data_rx(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t hcint;
|
|
uint32_t hcchar;
|
|
uint32_t count;
|
|
uint8_t ep_type;
|
|
|
|
if (dwc_otg_host_channel_alloc(td))
|
|
return (1); /* busy */
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
ep_type = ((td->hcchar &
|
|
HCCHAR_EPTYPE_MASK) >> HCCHAR_EPTYPE_SHIFT);
|
|
|
|
hcint = sc->sc_chan_state[td->channel].hcint;
|
|
|
|
DPRINTF("CH=%d ST=%d HCINT=0x%08x HCCHAR=0x%08x HCTSIZ=0x%08x\n",
|
|
td->channel, td->state, hcint,
|
|
DWC_OTG_READ_4(sc, DOTG_HCCHAR(td->channel)),
|
|
DWC_OTG_READ_4(sc, DOTG_HCTSIZ(td->channel)));
|
|
|
|
/* check interrupt bits */
|
|
|
|
if (hcint & (HCINT_RETRY |
|
|
HCINT_ACK | HCINT_NYET)) {
|
|
/* give success bits priority over failure bits */
|
|
} else if (hcint & HCINT_STALL) {
|
|
DPRINTF("CH=%d STALL\n", td->channel);
|
|
td->error_stall = 1;
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
} else if (hcint & HCINT_ERRORS) {
|
|
DPRINTF("CH=%d ERROR\n", td->channel);
|
|
td->errcnt++;
|
|
if (td->hcsplt != 0 || td->errcnt >= 3) {
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
}
|
|
}
|
|
|
|
/* channel must be disabled before we can complete the transfer */
|
|
|
|
if (hcint & (HCINT_ERRORS | HCINT_RETRY |
|
|
HCINT_ACK | HCINT_NYET)) {
|
|
|
|
dwc_otg_host_channel_disable(sc, td->channel);
|
|
|
|
if (!(hcint & HCINT_ERRORS))
|
|
td->errcnt = 0;
|
|
}
|
|
|
|
/* check endpoint status */
|
|
if (sc->sc_last_rx_status == 0)
|
|
goto check_state;
|
|
|
|
if (GRXSTSRD_CHNUM_GET(sc->sc_last_rx_status) != td->channel)
|
|
goto check_state;
|
|
|
|
switch (sc->sc_last_rx_status & GRXSTSRD_PKTSTS_MASK) {
|
|
case GRXSTSRH_IN_DATA:
|
|
|
|
DPRINTF("DATA ST=%d STATUS=0x%08x\n",
|
|
(int)td->state, (int)sc->sc_last_rx_status);
|
|
|
|
if (hcint & HCINT_SOFTWARE_ONLY) {
|
|
/*
|
|
* When using SPLIT transactions on interrupt
|
|
* endpoints, sometimes data occurs twice.
|
|
*/
|
|
DPRINTF("Data already received\n");
|
|
break;
|
|
}
|
|
|
|
td->toggle ^= 1;
|
|
|
|
/* get the packet byte count */
|
|
count = GRXSTSRD_BCNT_GET(sc->sc_last_rx_status);
|
|
|
|
/* verify the packet byte count */
|
|
if (count != td->max_packet_size) {
|
|
if (count < td->max_packet_size) {
|
|
/* we have a short packet */
|
|
td->short_pkt = 1;
|
|
td->got_short = 1;
|
|
} else {
|
|
/* invalid USB packet */
|
|
td->error_any = 1;
|
|
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
return (0); /* we are complete */
|
|
}
|
|
}
|
|
|
|
/* verify the packet byte count */
|
|
if (count > td->remainder) {
|
|
/* invalid USB packet */
|
|
td->error_any = 1;
|
|
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
return (0); /* we are complete */
|
|
}
|
|
|
|
usbd_copy_in(td->pc, td->offset,
|
|
sc->sc_rx_bounce_buffer, count);
|
|
|
|
td->remainder -= count;
|
|
td->offset += count;
|
|
hcint |= HCINT_SOFTWARE_ONLY | HCINT_ACK;
|
|
sc->sc_chan_state[td->channel].hcint = hcint;
|
|
break;
|
|
|
|
default:
|
|
DPRINTF("OTHER\n");
|
|
break;
|
|
}
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
|
|
check_state:
|
|
switch (td->state) {
|
|
case DWC_CHAN_ST_START:
|
|
if (td->hcsplt != 0)
|
|
goto receive_spkt;
|
|
else
|
|
goto receive_pkt;
|
|
|
|
case DWC_CHAN_ST_WAIT_ANE:
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
|
|
td->did_nak = 1;
|
|
if (td->hcsplt != 0)
|
|
goto receive_spkt;
|
|
else
|
|
goto receive_pkt;
|
|
}
|
|
if (!(hcint & HCINT_SOFTWARE_ONLY)) {
|
|
if (hcint & HCINT_NYET) {
|
|
if (td->hcsplt != 0) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
goto receive_pkt;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
if (hcint & (HCINT_ACK | HCINT_NYET)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
|
|
/* check if we are complete */
|
|
if ((td->remainder == 0) || (td->got_short != 0)) {
|
|
if (td->short_pkt)
|
|
return (0); /* complete */
|
|
|
|
/*
|
|
* Else need to receive a zero length
|
|
* packet.
|
|
*/
|
|
}
|
|
if (td->hcsplt != 0)
|
|
goto receive_spkt;
|
|
else
|
|
goto receive_pkt;
|
|
}
|
|
break;
|
|
|
|
case DWC_CHAN_ST_WAIT_S_ANE:
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
|
|
td->did_nak = 1;
|
|
goto receive_spkt;
|
|
}
|
|
if (hcint & (HCINT_ACK | HCINT_NYET)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
goto receive_pkt;
|
|
}
|
|
break;
|
|
|
|
case DWC_CHAN_ST_RX_PKT:
|
|
goto receive_pkt;
|
|
|
|
case DWC_CHAN_ST_RX_SPKT:
|
|
goto receive_spkt;
|
|
|
|
case DWC_CHAN_ST_RX_SPKT_SYNC:
|
|
goto receive_spkt_sync;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
goto busy;
|
|
|
|
receive_pkt:
|
|
if (td->hcsplt != 0) {
|
|
count = DWC_OTG_READ_4(sc, DOTG_HFNUM) & 7;
|
|
|
|
/* check for even microframes */
|
|
if (count == td->curr_frame) {
|
|
td->state = DWC_CHAN_ST_RX_PKT;
|
|
dwc_otg_host_channel_free(td);
|
|
/* enable SOF interrupt */
|
|
dwc_otg_enable_sof_irq(sc);
|
|
goto busy;
|
|
} else if (count == 0) {
|
|
/* check for start split timeout */
|
|
goto receive_spkt;
|
|
}
|
|
|
|
td->curr_frame = count;
|
|
td->hcsplt |= HCSPLT_COMPSPLT;
|
|
} else if (dwc_otg_host_rate_check(td)) {
|
|
td->state = DWC_CHAN_ST_RX_PKT;
|
|
dwc_otg_host_channel_free(td);
|
|
goto busy;
|
|
}
|
|
|
|
td->state = DWC_CHAN_ST_WAIT_ANE;
|
|
|
|
/* receive one packet */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCTSIZ(td->channel),
|
|
(td->max_packet_size << HCTSIZ_XFERSIZE_SHIFT) |
|
|
(1 << HCTSIZ_PKTCNT_SHIFT) |
|
|
(td->toggle ? (HCTSIZ_PID_DATA1 << HCTSIZ_PID_SHIFT) :
|
|
(HCTSIZ_PID_DATA0 << HCTSIZ_PID_SHIFT)));
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCSPLT(td->channel), td->hcsplt);
|
|
|
|
hcchar = td->hcchar;
|
|
hcchar |= HCCHAR_EPDIR_IN;
|
|
|
|
/* must enable channel before data can be received */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCCHAR(td->channel), hcchar);
|
|
|
|
goto busy;
|
|
|
|
receive_spkt:
|
|
if (dwc_otg_host_rate_check(td)) {
|
|
td->state = DWC_CHAN_ST_RX_SPKT;
|
|
dwc_otg_host_channel_free(td);
|
|
goto busy;
|
|
}
|
|
|
|
receive_spkt_sync:
|
|
if (ep_type == UE_INTERRUPT ||
|
|
ep_type == UE_ISOCHRONOUS) {
|
|
count = DWC_OTG_READ_4(sc, DOTG_HFNUM) & 7;
|
|
td->curr_frame = count;
|
|
|
|
/* check for non-zero microframe */
|
|
if (count != 0) {
|
|
/* enable SOF interrupt */
|
|
dwc_otg_enable_sof_irq(sc);
|
|
/* set state */
|
|
td->state = DWC_CHAN_ST_RX_SPKT_SYNC;
|
|
dwc_otg_host_channel_free(td);
|
|
goto busy;
|
|
}
|
|
} else {
|
|
count = DWC_OTG_READ_4(sc, DOTG_HFNUM) & 7;
|
|
td->curr_frame = count;
|
|
|
|
/* check for two last frames */
|
|
if (count >= 6) {
|
|
/* enable SOF interrupt */
|
|
dwc_otg_enable_sof_irq(sc);
|
|
/* set state */
|
|
td->state = DWC_CHAN_ST_RX_SPKT_SYNC;
|
|
dwc_otg_host_channel_free(td);
|
|
goto busy;
|
|
}
|
|
}
|
|
|
|
td->hcsplt &= ~HCSPLT_COMPSPLT;
|
|
td->state = DWC_CHAN_ST_WAIT_S_ANE;
|
|
|
|
/* receive one packet */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCTSIZ(td->channel),
|
|
(td->toggle ? (HCTSIZ_PID_DATA1 << HCTSIZ_PID_SHIFT) :
|
|
(HCTSIZ_PID_DATA0 << HCTSIZ_PID_SHIFT)));
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCSPLT(td->channel), td->hcsplt);
|
|
|
|
hcchar = td->hcchar;
|
|
hcchar |= HCCHAR_EPDIR_IN;
|
|
|
|
/* must enable channel before data can be received */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCCHAR(td->channel), hcchar);
|
|
|
|
busy:
|
|
return (1); /* busy */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_data_rx(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t temp;
|
|
uint16_t count;
|
|
uint8_t got_short;
|
|
|
|
got_short = 0;
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
/* check endpoint status */
|
|
if (sc->sc_last_rx_status == 0)
|
|
goto not_complete;
|
|
|
|
if (GRXSTSRD_CHNUM_GET(sc->sc_last_rx_status) != td->ep_no)
|
|
goto not_complete;
|
|
|
|
/* check for SETUP packet */
|
|
if ((sc->sc_last_rx_status & GRXSTSRD_PKTSTS_MASK) ==
|
|
GRXSTSRD_STP_DATA) {
|
|
if (td->remainder == 0) {
|
|
/*
|
|
* We are actually complete and have
|
|
* received the next SETUP
|
|
*/
|
|
DPRINTFN(5, "faking complete\n");
|
|
return (0); /* complete */
|
|
}
|
|
/*
|
|
* USB Host Aborted the transfer.
|
|
*/
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
}
|
|
|
|
if ((sc->sc_last_rx_status & GRXSTSRD_PKTSTS_MASK) !=
|
|
GRXSTSRD_OUT_DATA) {
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto not_complete;
|
|
}
|
|
|
|
/* get the packet byte count */
|
|
count = GRXSTSRD_BCNT_GET(sc->sc_last_rx_status);
|
|
|
|
/* verify the packet byte count */
|
|
if (count != td->max_packet_size) {
|
|
if (count < td->max_packet_size) {
|
|
/* we have a short packet */
|
|
td->short_pkt = 1;
|
|
got_short = 1;
|
|
} else {
|
|
/* invalid USB packet */
|
|
td->error_any = 1;
|
|
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
return (0); /* we are complete */
|
|
}
|
|
}
|
|
/* verify the packet byte count */
|
|
if (count > td->remainder) {
|
|
/* invalid USB packet */
|
|
td->error_any = 1;
|
|
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
return (0); /* we are complete */
|
|
}
|
|
|
|
usbd_copy_in(td->pc, td->offset, sc->sc_rx_bounce_buffer, count);
|
|
td->remainder -= count;
|
|
td->offset += count;
|
|
|
|
/* release FIFO */
|
|
dwc_otg_common_rx_ack(sc);
|
|
|
|
/* check if we are complete */
|
|
if ((td->remainder == 0) || got_short) {
|
|
if (td->short_pkt) {
|
|
/* we are complete */
|
|
return (0);
|
|
}
|
|
/* else need to receive a zero length packet */
|
|
}
|
|
|
|
not_complete:
|
|
|
|
temp = sc->sc_out_ctl[td->ep_no];
|
|
|
|
temp |= DOEPCTL_EPENA | DOEPCTL_CNAK;
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPCTL(td->ep_no), temp);
|
|
|
|
/* enable SETUP and transfer complete interrupt */
|
|
if (td->ep_no == 0) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPTSIZ(0),
|
|
DXEPTSIZ_SET_NPKT(1) |
|
|
DXEPTSIZ_SET_NBYTES(td->max_packet_size));
|
|
} else {
|
|
/* allow reception of multiple packets */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPTSIZ(td->ep_no),
|
|
DXEPTSIZ_SET_MULTI(1) |
|
|
DXEPTSIZ_SET_NPKT(4) |
|
|
DXEPTSIZ_SET_NBYTES(4 *
|
|
((td->max_packet_size + 3) & ~3)));
|
|
}
|
|
return (1); /* not complete */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_host_data_tx(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t count;
|
|
uint32_t hcint;
|
|
uint32_t hcchar;
|
|
uint8_t ep_type;
|
|
|
|
if (dwc_otg_host_channel_alloc(td))
|
|
return (1); /* busy */
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
ep_type = ((td->hcchar &
|
|
HCCHAR_EPTYPE_MASK) >> HCCHAR_EPTYPE_SHIFT);
|
|
|
|
hcint = sc->sc_chan_state[td->channel].hcint;
|
|
|
|
DPRINTF("CH=%d ST=%d HCINT=0x%08x HCCHAR=0x%08x HCTSIZ=0x%08x\n",
|
|
td->channel, td->state, hcint,
|
|
DWC_OTG_READ_4(sc, DOTG_HCCHAR(td->channel)),
|
|
DWC_OTG_READ_4(sc, DOTG_HCTSIZ(td->channel)));
|
|
|
|
if (hcint & (HCINT_RETRY |
|
|
HCINT_ACK | HCINT_NYET)) {
|
|
/* give success bits priority over failure bits */
|
|
} else if (hcint & HCINT_STALL) {
|
|
DPRINTF("CH=%d STALL\n", td->channel);
|
|
td->error_stall = 1;
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
} else if (hcint & HCINT_ERRORS) {
|
|
DPRINTF("CH=%d ERROR\n", td->channel);
|
|
td->errcnt++;
|
|
if (td->hcsplt != 0 || td->errcnt >= 3) {
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
}
|
|
}
|
|
|
|
/* channel must be disabled before we can complete the transfer */
|
|
|
|
if (hcint & (HCINT_ERRORS | HCINT_RETRY |
|
|
HCINT_ACK | HCINT_NYET)) {
|
|
|
|
dwc_otg_host_channel_disable(sc, td->channel);
|
|
|
|
if (!(hcint & HCINT_ERRORS))
|
|
td->errcnt = 0;
|
|
}
|
|
|
|
switch (td->state) {
|
|
case DWC_CHAN_ST_START:
|
|
goto send_pkt;
|
|
|
|
case DWC_CHAN_ST_WAIT_ANE:
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->did_nak = 1;
|
|
goto send_pkt;
|
|
}
|
|
if (hcint & (HCINT_ACK | HCINT_NYET)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
|
|
td->offset += td->tx_bytes;
|
|
td->remainder -= td->tx_bytes;
|
|
td->toggle ^= 1;
|
|
|
|
/* check remainder */
|
|
if (td->remainder == 0) {
|
|
if (td->short_pkt)
|
|
return (0); /* complete */
|
|
|
|
/*
|
|
* Else we need to transmit a short
|
|
* packet:
|
|
*/
|
|
}
|
|
goto send_pkt;
|
|
}
|
|
break;
|
|
case DWC_CHAN_ST_WAIT_S_ANE:
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->did_nak = 1;
|
|
goto send_pkt;
|
|
}
|
|
if (hcint & (HCINT_ACK | HCINT_NYET)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
goto send_cpkt;
|
|
}
|
|
break;
|
|
case DWC_CHAN_ST_WAIT_C_ANE:
|
|
if (hcint & HCINT_NYET) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
goto send_cpkt;
|
|
}
|
|
if (hcint & (HCINT_RETRY | HCINT_ERRORS)) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->did_nak = 1;
|
|
goto send_pkt;
|
|
}
|
|
if (hcint & HCINT_ACK) {
|
|
if (!dwc_otg_host_channel_wait(td))
|
|
break;
|
|
td->offset += td->tx_bytes;
|
|
td->remainder -= td->tx_bytes;
|
|
td->toggle ^= 1;
|
|
|
|
/* check remainder */
|
|
if (td->remainder == 0) {
|
|
if (td->short_pkt)
|
|
return (0); /* complete */
|
|
|
|
/* else we need to transmit a short packet */
|
|
}
|
|
goto send_pkt;
|
|
}
|
|
break;
|
|
|
|
case DWC_CHAN_ST_TX_PKT:
|
|
goto send_pkt;
|
|
|
|
case DWC_CHAN_ST_TX_PKT_SYNC:
|
|
goto send_pkt_sync;
|
|
|
|
case DWC_CHAN_ST_TX_CPKT:
|
|
goto send_cpkt;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
goto busy;
|
|
|
|
send_pkt:
|
|
if (dwc_otg_host_rate_check(td)) {
|
|
td->state = DWC_CHAN_ST_TX_PKT;
|
|
dwc_otg_host_channel_free(td);
|
|
goto busy;
|
|
}
|
|
|
|
send_pkt_sync:
|
|
if (td->hcsplt != 0) {
|
|
count = DWC_OTG_READ_4(sc, DOTG_HFNUM) & 7;
|
|
/* check for first or last microframe */
|
|
if (count == 7 || count == 0) {
|
|
/* enable SOF interrupt */
|
|
dwc_otg_enable_sof_irq(sc);
|
|
/* set state */
|
|
td->state = DWC_CHAN_ST_TX_PKT_SYNC;
|
|
dwc_otg_host_channel_free(td);
|
|
goto busy;
|
|
}
|
|
|
|
td->hcsplt &= ~HCSPLT_COMPSPLT;
|
|
td->state = DWC_CHAN_ST_WAIT_S_ANE;
|
|
} else {
|
|
td->state = DWC_CHAN_ST_WAIT_ANE;
|
|
}
|
|
|
|
/* send one packet at a time */
|
|
count = td->max_packet_size;
|
|
if (td->remainder < count) {
|
|
/* we have a short packet */
|
|
td->short_pkt = 1;
|
|
count = td->remainder;
|
|
}
|
|
|
|
/* TODO: HCTSIZ_DOPNG */
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCTSIZ(td->channel),
|
|
(count << HCTSIZ_XFERSIZE_SHIFT) |
|
|
(1 << HCTSIZ_PKTCNT_SHIFT) |
|
|
(td->toggle ? (HCTSIZ_PID_DATA1 << HCTSIZ_PID_SHIFT) :
|
|
(HCTSIZ_PID_DATA0 << HCTSIZ_PID_SHIFT)));
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCSPLT(td->channel), td->hcsplt);
|
|
|
|
hcchar = td->hcchar;
|
|
hcchar &= ~HCCHAR_EPDIR_IN;
|
|
|
|
/* must enable before writing data to FIFO */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCCHAR(td->channel), hcchar);
|
|
|
|
if (count != 0) {
|
|
|
|
/* clear topmost word before copy */
|
|
sc->sc_tx_bounce_buffer[(count - 1) / 4] = 0;
|
|
|
|
/* copy out data */
|
|
usbd_copy_out(td->pc, td->offset,
|
|
sc->sc_tx_bounce_buffer, count);
|
|
|
|
/* transfer data into FIFO */
|
|
bus_space_write_region_4(sc->sc_io_tag, sc->sc_io_hdl,
|
|
DOTG_DFIFO(td->channel),
|
|
sc->sc_tx_bounce_buffer, (count + 3) / 4);
|
|
}
|
|
|
|
/* store number of bytes transmitted */
|
|
td->tx_bytes = count;
|
|
|
|
goto busy;
|
|
|
|
send_cpkt:
|
|
count = DWC_OTG_READ_4(sc, DOTG_HFNUM) & 7;
|
|
/* check for first microframe */
|
|
if (count == 0) {
|
|
/* send packet again */
|
|
goto send_pkt;
|
|
}
|
|
|
|
td->hcsplt |= HCSPLT_COMPSPLT;
|
|
td->state = DWC_CHAN_ST_WAIT_C_ANE;
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCTSIZ(td->channel),
|
|
(td->toggle ? (HCTSIZ_PID_DATA1 << HCTSIZ_PID_SHIFT) :
|
|
(HCTSIZ_PID_DATA0 << HCTSIZ_PID_SHIFT)));
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCSPLT(td->channel), td->hcsplt);
|
|
|
|
hcchar = td->hcchar;
|
|
hcchar &= ~HCCHAR_EPDIR_IN;
|
|
|
|
/* must enable channel before writing data to FIFO */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCCHAR(td->channel), hcchar);
|
|
|
|
busy:
|
|
return (1); /* busy */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_data_tx(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t max_buffer;
|
|
uint32_t count;
|
|
uint32_t fifo_left;
|
|
uint32_t mpkt;
|
|
uint32_t temp;
|
|
uint8_t to;
|
|
|
|
to = 3; /* don't loop forever! */
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
max_buffer = sc->sc_hw_ep_profile[td->ep_no].max_buffer;
|
|
|
|
repeat:
|
|
/* check for for endpoint 0 data */
|
|
|
|
temp = sc->sc_last_rx_status;
|
|
|
|
if ((td->ep_no == 0) && (temp != 0) &&
|
|
(GRXSTSRD_CHNUM_GET(temp) == 0)) {
|
|
|
|
if ((temp & GRXSTSRD_PKTSTS_MASK) !=
|
|
GRXSTSRD_STP_DATA) {
|
|
|
|
/* dump data - wrong direction */
|
|
dwc_otg_common_rx_ack(sc);
|
|
} else {
|
|
/*
|
|
* The current transfer was cancelled
|
|
* by the USB Host:
|
|
*/
|
|
td->error_any = 1;
|
|
return (0); /* complete */
|
|
}
|
|
}
|
|
|
|
/* fill in more TX data, if possible */
|
|
if (td->tx_bytes != 0) {
|
|
|
|
uint16_t cpkt;
|
|
|
|
/* check if packets have been transferred */
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DIEPTSIZ(td->ep_no));
|
|
|
|
/* get current packet number */
|
|
cpkt = DXEPTSIZ_GET_NPKT(temp);
|
|
|
|
if (cpkt >= td->npkt) {
|
|
fifo_left = 0;
|
|
} else {
|
|
if (max_buffer != 0) {
|
|
fifo_left = (td->npkt - cpkt) *
|
|
td->max_packet_size;
|
|
|
|
if (fifo_left > max_buffer)
|
|
fifo_left = max_buffer;
|
|
} else {
|
|
fifo_left = td->max_packet_size;
|
|
}
|
|
}
|
|
|
|
count = td->tx_bytes;
|
|
if (count > fifo_left)
|
|
count = fifo_left;
|
|
|
|
if (count != 0) {
|
|
|
|
/* clear topmost word before copy */
|
|
sc->sc_tx_bounce_buffer[(count - 1) / 4] = 0;
|
|
|
|
/* copy out data */
|
|
usbd_copy_out(td->pc, td->offset,
|
|
sc->sc_tx_bounce_buffer, count);
|
|
|
|
/* transfer data into FIFO */
|
|
bus_space_write_region_4(sc->sc_io_tag, sc->sc_io_hdl,
|
|
DOTG_DFIFO(td->ep_no),
|
|
sc->sc_tx_bounce_buffer, (count + 3) / 4);
|
|
|
|
td->tx_bytes -= count;
|
|
td->remainder -= count;
|
|
td->offset += count;
|
|
td->npkt = cpkt;
|
|
}
|
|
if (td->tx_bytes != 0)
|
|
goto not_complete;
|
|
|
|
/* check remainder */
|
|
if (td->remainder == 0) {
|
|
if (td->short_pkt)
|
|
return (0); /* complete */
|
|
|
|
/* else we need to transmit a short packet */
|
|
}
|
|
}
|
|
|
|
if (!to--)
|
|
goto not_complete;
|
|
|
|
/* check if not all packets have been transferred */
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DIEPTSIZ(td->ep_no));
|
|
|
|
if (DXEPTSIZ_GET_NPKT(temp) != 0) {
|
|
|
|
DPRINTFN(5, "busy ep=%d npkt=%d DIEPTSIZ=0x%08x "
|
|
"DIEPCTL=0x%08x\n", td->ep_no,
|
|
DXEPTSIZ_GET_NPKT(temp),
|
|
temp, DWC_OTG_READ_4(sc, DOTG_DIEPCTL(td->ep_no)));
|
|
|
|
goto not_complete;
|
|
}
|
|
|
|
DPRINTFN(5, "rem=%u ep=%d\n", td->remainder, td->ep_no);
|
|
|
|
/* try to optimise by sending more data */
|
|
if ((max_buffer != 0) && ((td->max_packet_size & 3) == 0)) {
|
|
|
|
/* send multiple packets at the same time */
|
|
mpkt = max_buffer / td->max_packet_size;
|
|
|
|
if (mpkt > 0x3FE)
|
|
mpkt = 0x3FE;
|
|
|
|
count = td->remainder;
|
|
if (count > 0x7FFFFF)
|
|
count = 0x7FFFFF - (0x7FFFFF % td->max_packet_size);
|
|
|
|
td->npkt = count / td->max_packet_size;
|
|
|
|
/*
|
|
* NOTE: We could use 0x3FE instead of "mpkt" in the
|
|
* check below to get more throughput, but then we
|
|
* have a dependency towards non-generic chip features
|
|
* to disable the TX-FIFO-EMPTY interrupts on a per
|
|
* endpoint basis. Increase the maximum buffer size of
|
|
* the IN endpoint to increase the performance.
|
|
*/
|
|
if (td->npkt > mpkt) {
|
|
td->npkt = mpkt;
|
|
count = td->max_packet_size * mpkt;
|
|
} else if ((count == 0) || (count % td->max_packet_size)) {
|
|
/* we are transmitting a short packet */
|
|
td->npkt++;
|
|
td->short_pkt = 1;
|
|
}
|
|
} else {
|
|
/* send one packet at a time */
|
|
mpkt = 1;
|
|
count = td->max_packet_size;
|
|
if (td->remainder < count) {
|
|
/* we have a short packet */
|
|
td->short_pkt = 1;
|
|
count = td->remainder;
|
|
}
|
|
td->npkt = 1;
|
|
}
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPTSIZ(td->ep_no),
|
|
DXEPTSIZ_SET_MULTI(1) |
|
|
DXEPTSIZ_SET_NPKT(td->npkt) |
|
|
DXEPTSIZ_SET_NBYTES(count));
|
|
|
|
/* make room for buffering */
|
|
td->npkt += mpkt;
|
|
|
|
temp = sc->sc_in_ctl[td->ep_no];
|
|
|
|
/* must enable before writing data to FIFO */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPCTL(td->ep_no), temp |
|
|
DIEPCTL_EPENA |
|
|
DIEPCTL_CNAK);
|
|
|
|
td->tx_bytes = count;
|
|
|
|
/* check remainder */
|
|
if (td->tx_bytes == 0 &&
|
|
td->remainder == 0) {
|
|
if (td->short_pkt)
|
|
return (0); /* complete */
|
|
|
|
/* else we need to transmit a short packet */
|
|
}
|
|
goto repeat;
|
|
|
|
not_complete:
|
|
return (1); /* not complete */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_data_tx_sync(struct dwc_otg_td *td)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t temp;
|
|
|
|
/* get pointer to softc */
|
|
sc = DWC_OTG_PC2SC(td->pc);
|
|
|
|
/*
|
|
* If all packets are transferred we are complete:
|
|
*/
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DIEPTSIZ(td->ep_no));
|
|
|
|
/* check that all packets have been transferred */
|
|
if (DXEPTSIZ_GET_NPKT(temp) != 0) {
|
|
DPRINTFN(5, "busy ep=%d\n", td->ep_no);
|
|
goto not_complete;
|
|
}
|
|
return (0);
|
|
|
|
not_complete:
|
|
|
|
/* we only want to know if there is a SETUP packet or free IN packet */
|
|
|
|
temp = sc->sc_last_rx_status;
|
|
|
|
if ((td->ep_no == 0) && (temp != 0) &&
|
|
(GRXSTSRD_CHNUM_GET(temp) == 0)) {
|
|
|
|
if ((temp & GRXSTSRD_PKTSTS_MASK) ==
|
|
GRXSTSRD_STP_DATA) {
|
|
DPRINTFN(5, "faking complete\n");
|
|
/*
|
|
* Race condition: We are complete!
|
|
*/
|
|
return (0);
|
|
} else {
|
|
/* dump data - wrong direction */
|
|
dwc_otg_common_rx_ack(sc);
|
|
}
|
|
}
|
|
return (1); /* not complete */
|
|
}
|
|
|
|
static uint8_t
|
|
dwc_otg_xfer_do_fifo(struct usb_xfer *xfer)
|
|
{
|
|
struct dwc_otg_td *td;
|
|
uint8_t toggle;
|
|
uint8_t channel;
|
|
uint8_t tmr_val;
|
|
uint8_t tmr_res;
|
|
|
|
DPRINTFN(9, "\n");
|
|
|
|
td = xfer->td_transfer_cache;
|
|
|
|
/*
|
|
* If we are suspended in host mode and no channel is
|
|
* allocated, simply return:
|
|
*/
|
|
if (xfer->xroot->udev->flags.self_suspended != 0 &&
|
|
xfer->xroot->udev->flags.usb_mode == USB_MODE_HOST &&
|
|
td->channel >= DWC_OTG_MAX_CHANNELS) {
|
|
return (1); /* not complete */
|
|
}
|
|
while (1) {
|
|
if ((td->func) (td)) {
|
|
/* operation in progress */
|
|
break;
|
|
}
|
|
if (((void *)td) == xfer->td_transfer_last) {
|
|
goto done;
|
|
}
|
|
if (td->error_any) {
|
|
goto done;
|
|
} else if (td->remainder > 0) {
|
|
/*
|
|
* We had a short transfer. If there is no alternate
|
|
* next, stop processing !
|
|
*/
|
|
if (!td->alt_next)
|
|
goto done;
|
|
}
|
|
|
|
/*
|
|
* Fetch the next transfer descriptor and transfer
|
|
* some flags to the next transfer descriptor
|
|
*/
|
|
tmr_res = td->tmr_res;
|
|
tmr_val = td->tmr_val;
|
|
toggle = td->toggle;
|
|
channel = td->channel;
|
|
td = td->obj_next;
|
|
xfer->td_transfer_cache = td;
|
|
td->toggle = toggle; /* transfer toggle */
|
|
td->channel = channel; /* transfer channel */
|
|
td->tmr_res = tmr_res;
|
|
td->tmr_val = tmr_val;
|
|
}
|
|
return (1); /* not complete */
|
|
|
|
done:
|
|
/* compute all actual lengths */
|
|
|
|
dwc_otg_standard_done(xfer);
|
|
return (0); /* complete */
|
|
}
|
|
|
|
static void
|
|
dwc_otg_timer(void *_sc)
|
|
{
|
|
struct dwc_otg_softc *sc = _sc;
|
|
struct usb_xfer *xfer;
|
|
struct dwc_otg_td *td;
|
|
|
|
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
|
|
|
|
DPRINTF("\n");
|
|
|
|
/* increment timer value */
|
|
sc->sc_tmr_val++;
|
|
|
|
TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
|
|
td = xfer->td_transfer_cache;
|
|
if (td != NULL)
|
|
td->did_nak = 0;
|
|
}
|
|
|
|
/* poll jobs */
|
|
dwc_otg_interrupt_poll(sc);
|
|
|
|
if (sc->sc_timer_active) {
|
|
/* restart timer */
|
|
usb_callout_reset(&sc->sc_timer,
|
|
hz / (1000 / DWC_OTG_HOST_TIMER_RATE),
|
|
&dwc_otg_timer, sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_timer_start(struct dwc_otg_softc *sc)
|
|
{
|
|
if (sc->sc_timer_active != 0)
|
|
return;
|
|
|
|
sc->sc_timer_active = 1;
|
|
|
|
/* restart timer */
|
|
usb_callout_reset(&sc->sc_timer,
|
|
hz / (1000 / DWC_OTG_HOST_TIMER_RATE),
|
|
&dwc_otg_timer, sc);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_timer_stop(struct dwc_otg_softc *sc)
|
|
{
|
|
if (sc->sc_timer_active == 0)
|
|
return;
|
|
|
|
sc->sc_timer_active = 0;
|
|
|
|
/* stop timer */
|
|
usb_callout_stop(&sc->sc_timer);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_interrupt_poll(struct dwc_otg_softc *sc)
|
|
{
|
|
struct usb_xfer *xfer;
|
|
uint32_t temp;
|
|
uint8_t got_rx_status;
|
|
uint8_t x;
|
|
|
|
repeat:
|
|
/* get all channel interrupts */
|
|
for (x = 0; x != sc->sc_host_ch_max; x++) {
|
|
temp = DWC_OTG_READ_4(sc, DOTG_HCINT(x));
|
|
if (temp != 0) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCINT(x), temp);
|
|
temp &= ~HCINT_SOFTWARE_ONLY;
|
|
sc->sc_chan_state[x].hcint |= temp;
|
|
}
|
|
}
|
|
|
|
if (sc->sc_last_rx_status == 0) {
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GINTSTS);
|
|
if (temp & GINTSTS_RXFLVL) {
|
|
/* pop current status */
|
|
sc->sc_last_rx_status =
|
|
DWC_OTG_READ_4(sc, DOTG_GRXSTSPD);
|
|
}
|
|
|
|
if (sc->sc_last_rx_status != 0) {
|
|
|
|
uint8_t ep_no;
|
|
|
|
temp = sc->sc_last_rx_status &
|
|
GRXSTSRD_PKTSTS_MASK;
|
|
|
|
/* non-data messages we simply skip */
|
|
if (temp != GRXSTSRD_STP_DATA &&
|
|
temp != GRXSTSRD_OUT_DATA) {
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto repeat;
|
|
}
|
|
|
|
temp = GRXSTSRD_BCNT_GET(
|
|
sc->sc_last_rx_status);
|
|
ep_no = GRXSTSRD_CHNUM_GET(
|
|
sc->sc_last_rx_status);
|
|
|
|
/* receive data, if any */
|
|
if (temp != 0) {
|
|
DPRINTF("Reading %d bytes from ep %d\n", temp, ep_no);
|
|
bus_space_read_region_4(sc->sc_io_tag, sc->sc_io_hdl,
|
|
DOTG_DFIFO(ep_no),
|
|
sc->sc_rx_bounce_buffer, (temp + 3) / 4);
|
|
}
|
|
|
|
/* check if we should dump the data */
|
|
if (!(sc->sc_active_rx_ep & (1U << ep_no))) {
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto repeat;
|
|
}
|
|
|
|
got_rx_status = 1;
|
|
|
|
DPRINTFN(5, "RX status = 0x%08x: ch=%d pid=%d bytes=%d sts=%d\n",
|
|
sc->sc_last_rx_status, ep_no,
|
|
(sc->sc_last_rx_status >> 15) & 3,
|
|
GRXSTSRD_BCNT_GET(sc->sc_last_rx_status),
|
|
(sc->sc_last_rx_status >> 17) & 15);
|
|
} else {
|
|
got_rx_status = 0;
|
|
}
|
|
} else {
|
|
uint8_t ep_no;
|
|
|
|
ep_no = GRXSTSRD_CHNUM_GET(
|
|
sc->sc_last_rx_status);
|
|
|
|
/* check if we should dump the data */
|
|
if (!(sc->sc_active_rx_ep & (1U << ep_no))) {
|
|
dwc_otg_common_rx_ack(sc);
|
|
goto repeat;
|
|
}
|
|
|
|
got_rx_status = 1;
|
|
}
|
|
|
|
TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
|
|
if (!dwc_otg_xfer_do_fifo(xfer)) {
|
|
/* queue has been modified */
|
|
goto repeat;
|
|
}
|
|
}
|
|
|
|
if (got_rx_status) {
|
|
/* check if data was consumed */
|
|
if (sc->sc_last_rx_status == 0)
|
|
goto repeat;
|
|
|
|
/* disable RX FIFO level interrupt */
|
|
sc->sc_irq_mask &= ~GINTSTS_RXFLVL;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_vbus_interrupt(struct dwc_otg_softc *sc, uint8_t is_on)
|
|
{
|
|
DPRINTFN(5, "vbus = %u\n", is_on);
|
|
|
|
if (is_on) {
|
|
if (!sc->sc_flags.status_vbus) {
|
|
sc->sc_flags.status_vbus = 1;
|
|
|
|
/* complete root HUB interrupt endpoint */
|
|
|
|
dwc_otg_root_intr(sc);
|
|
}
|
|
} else {
|
|
if (sc->sc_flags.status_vbus) {
|
|
sc->sc_flags.status_vbus = 0;
|
|
sc->sc_flags.status_bus_reset = 0;
|
|
sc->sc_flags.status_suspend = 0;
|
|
sc->sc_flags.change_suspend = 0;
|
|
sc->sc_flags.change_connect = 1;
|
|
|
|
/* complete root HUB interrupt endpoint */
|
|
|
|
dwc_otg_root_intr(sc);
|
|
}
|
|
}
|
|
}
|
|
|
|
void
|
|
dwc_otg_interrupt(struct dwc_otg_softc *sc)
|
|
{
|
|
uint32_t status;
|
|
|
|
USB_BUS_LOCK(&sc->sc_bus);
|
|
|
|
/* read and clear interrupt status */
|
|
status = DWC_OTG_READ_4(sc, DOTG_GINTSTS);
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTSTS, status);
|
|
|
|
DPRINTFN(14, "GINTSTS=0x%08x HAINT=0x%08x HFNUM=0x%08x\n",
|
|
status, DWC_OTG_READ_4(sc, DOTG_HAINT),
|
|
DWC_OTG_READ_4(sc, DOTG_HFNUM));
|
|
|
|
if (status & GINTSTS_USBRST) {
|
|
|
|
/* set correct state */
|
|
sc->sc_flags.status_device_mode = 1;
|
|
sc->sc_flags.status_bus_reset = 0;
|
|
sc->sc_flags.status_suspend = 0;
|
|
sc->sc_flags.change_suspend = 0;
|
|
sc->sc_flags.change_connect = 1;
|
|
|
|
/* complete root HUB interrupt endpoint */
|
|
dwc_otg_root_intr(sc);
|
|
}
|
|
|
|
/* check for any bus state change interrupts */
|
|
if (status & GINTSTS_ENUMDONE) {
|
|
|
|
uint32_t temp;
|
|
|
|
DPRINTFN(5, "end of reset\n");
|
|
|
|
/* set correct state */
|
|
sc->sc_flags.status_device_mode = 1;
|
|
sc->sc_flags.status_bus_reset = 1;
|
|
sc->sc_flags.status_suspend = 0;
|
|
sc->sc_flags.change_suspend = 0;
|
|
sc->sc_flags.change_connect = 1;
|
|
sc->sc_flags.status_low_speed = 0;
|
|
sc->sc_flags.port_enabled = 1;
|
|
|
|
/* reset FIFOs */
|
|
dwc_otg_init_fifo(sc, DWC_MODE_DEVICE);
|
|
|
|
/* reset function address */
|
|
dwc_otg_set_address(sc, 0);
|
|
|
|
/* figure out enumeration speed */
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DSTS);
|
|
if (DSTS_ENUMSPD_GET(temp) == DSTS_ENUMSPD_HI)
|
|
sc->sc_flags.status_high_speed = 1;
|
|
else
|
|
sc->sc_flags.status_high_speed = 0;
|
|
|
|
/* disable resume interrupt and enable suspend interrupt */
|
|
|
|
sc->sc_irq_mask &= ~GINTSTS_WKUPINT;
|
|
sc->sc_irq_mask |= GINTSTS_USBSUSP;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
|
|
/* complete root HUB interrupt endpoint */
|
|
dwc_otg_root_intr(sc);
|
|
}
|
|
|
|
if (status & GINTSTS_PRTINT) {
|
|
uint32_t hprt;
|
|
|
|
hprt = DWC_OTG_READ_4(sc, DOTG_HPRT);
|
|
|
|
/* clear change bits */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, (hprt & (
|
|
HPRT_PRTPWR | HPRT_PRTENCHNG |
|
|
HPRT_PRTCONNDET | HPRT_PRTOVRCURRCHNG)) |
|
|
sc->sc_hprt_val);
|
|
|
|
DPRINTFN(12, "GINTSTS=0x%08x, HPRT=0x%08x\n", status, hprt);
|
|
|
|
sc->sc_flags.status_device_mode = 0;
|
|
|
|
if (hprt & HPRT_PRTCONNSTS)
|
|
sc->sc_flags.status_bus_reset = 1;
|
|
else
|
|
sc->sc_flags.status_bus_reset = 0;
|
|
|
|
if (hprt & HPRT_PRTENCHNG)
|
|
sc->sc_flags.change_enabled = 1;
|
|
|
|
if (hprt & HPRT_PRTENA)
|
|
sc->sc_flags.port_enabled = 1;
|
|
else
|
|
sc->sc_flags.port_enabled = 0;
|
|
|
|
if (hprt & HPRT_PRTOVRCURRCHNG)
|
|
sc->sc_flags.change_over_current = 1;
|
|
|
|
if (hprt & HPRT_PRTOVRCURRACT)
|
|
sc->sc_flags.port_over_current = 1;
|
|
else
|
|
sc->sc_flags.port_over_current = 0;
|
|
|
|
if (hprt & HPRT_PRTPWR)
|
|
sc->sc_flags.port_powered = 1;
|
|
else
|
|
sc->sc_flags.port_powered = 0;
|
|
|
|
if (((hprt & HPRT_PRTSPD_MASK)
|
|
>> HPRT_PRTSPD_SHIFT) == HPRT_PRTSPD_LOW)
|
|
sc->sc_flags.status_low_speed = 1;
|
|
else
|
|
sc->sc_flags.status_low_speed = 0;
|
|
|
|
if (((hprt & HPRT_PRTSPD_MASK)
|
|
>> HPRT_PRTSPD_SHIFT) == HPRT_PRTSPD_HIGH)
|
|
sc->sc_flags.status_high_speed = 1;
|
|
else
|
|
sc->sc_flags.status_high_speed = 0;
|
|
|
|
if (hprt & HPRT_PRTCONNDET)
|
|
sc->sc_flags.change_connect = 1;
|
|
|
|
if (hprt & HPRT_PRTSUSP)
|
|
dwc_otg_suspend_irq(sc);
|
|
else
|
|
dwc_otg_resume_irq(sc);
|
|
|
|
/* complete root HUB interrupt endpoint */
|
|
dwc_otg_root_intr(sc);
|
|
}
|
|
|
|
/*
|
|
* If resume and suspend is set at the same time we interpret
|
|
* that like RESUME. Resume is set when there is at least 3
|
|
* milliseconds of inactivity on the USB BUS.
|
|
*/
|
|
if (status & GINTSTS_WKUPINT) {
|
|
|
|
DPRINTFN(5, "resume interrupt\n");
|
|
|
|
dwc_otg_resume_irq(sc);
|
|
|
|
} else if (status & GINTSTS_USBSUSP) {
|
|
|
|
DPRINTFN(5, "suspend interrupt\n");
|
|
|
|
dwc_otg_suspend_irq(sc);
|
|
}
|
|
/* check VBUS */
|
|
if (status & (GINTSTS_USBSUSP |
|
|
GINTSTS_USBRST |
|
|
GINTMSK_OTGINTMSK |
|
|
GINTSTS_SESSREQINT)) {
|
|
uint32_t temp;
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GOTGCTL);
|
|
|
|
DPRINTFN(5, "GOTGCTL=0x%08x\n", temp);
|
|
|
|
dwc_otg_vbus_interrupt(sc,
|
|
(temp & (GOTGCTL_ASESVLD | GOTGCTL_BSESVLD)) ? 1 : 0);
|
|
}
|
|
|
|
/* clear all IN endpoint interrupts */
|
|
if (status & GINTSTS_IEPINT) {
|
|
uint32_t temp;
|
|
uint8_t x;
|
|
|
|
for (x = 0; x != sc->sc_dev_in_ep_max; x++) {
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DIEPINT(x));
|
|
if (temp & DIEPMSK_XFERCOMPLMSK) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPINT(x),
|
|
DIEPMSK_XFERCOMPLMSK);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* check for SOF interrupt */
|
|
if (status & GINTSTS_SOF) {
|
|
if (sc->sc_irq_mask & GINTMSK_SOFMSK) {
|
|
uint8_t x;
|
|
uint8_t y;
|
|
|
|
DPRINTFN(12, "SOF interrupt\n");
|
|
|
|
for (x = y = 0; x != sc->sc_host_ch_max; x++) {
|
|
if (sc->sc_chan_state[x].wait_sof != 0) {
|
|
if (--(sc->sc_chan_state[x].wait_sof) != 0)
|
|
y = 1;
|
|
}
|
|
}
|
|
if (y == 0) {
|
|
sc->sc_irq_mask &= ~GINTMSK_SOFMSK;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* poll FIFO(s) */
|
|
dwc_otg_interrupt_poll(sc);
|
|
|
|
USB_BUS_UNLOCK(&sc->sc_bus);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_setup_standard_chain_sub(struct dwc_otg_std_temp *temp)
|
|
{
|
|
struct dwc_otg_td *td;
|
|
|
|
/* get current Transfer Descriptor */
|
|
td = temp->td_next;
|
|
temp->td = td;
|
|
|
|
/* prepare for next TD */
|
|
temp->td_next = td->obj_next;
|
|
|
|
/* fill out the Transfer Descriptor */
|
|
td->func = temp->func;
|
|
td->pc = temp->pc;
|
|
td->offset = temp->offset;
|
|
td->remainder = temp->len;
|
|
td->tx_bytes = 0;
|
|
td->error_any = 0;
|
|
td->error_stall = 0;
|
|
td->npkt = 0;
|
|
td->did_stall = temp->did_stall;
|
|
td->short_pkt = temp->short_pkt;
|
|
td->alt_next = temp->setup_alt_next;
|
|
td->set_toggle = 0;
|
|
td->got_short = 0;
|
|
td->did_nak = 0;
|
|
td->channel = DWC_OTG_MAX_CHANNELS;
|
|
td->state = 0;
|
|
td->errcnt = 0;
|
|
}
|
|
|
|
static void
|
|
dwc_otg_setup_standard_chain(struct usb_xfer *xfer)
|
|
{
|
|
struct dwc_otg_std_temp temp;
|
|
struct dwc_otg_td *td;
|
|
uint32_t x;
|
|
uint8_t need_sync;
|
|
uint8_t is_host;
|
|
|
|
DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n",
|
|
xfer->address, UE_GET_ADDR(xfer->endpointno),
|
|
xfer->sumlen, usbd_get_speed(xfer->xroot->udev));
|
|
|
|
temp.max_frame_size = xfer->max_frame_size;
|
|
|
|
td = xfer->td_start[0];
|
|
xfer->td_transfer_first = td;
|
|
xfer->td_transfer_cache = td;
|
|
|
|
/* setup temp */
|
|
|
|
temp.pc = NULL;
|
|
temp.td = NULL;
|
|
temp.td_next = xfer->td_start[0];
|
|
temp.offset = 0;
|
|
temp.setup_alt_next = xfer->flags_int.short_frames_ok;
|
|
temp.did_stall = !xfer->flags_int.control_stall;
|
|
|
|
is_host = (xfer->xroot->udev->flags.usb_mode == USB_MODE_HOST);
|
|
|
|
/* check if we should prepend a setup message */
|
|
|
|
if (xfer->flags_int.control_xfr) {
|
|
if (xfer->flags_int.control_hdr) {
|
|
|
|
if (is_host)
|
|
temp.func = &dwc_otg_host_setup_tx;
|
|
else
|
|
temp.func = &dwc_otg_setup_rx;
|
|
|
|
temp.len = xfer->frlengths[0];
|
|
temp.pc = xfer->frbuffers + 0;
|
|
temp.short_pkt = temp.len ? 1 : 0;
|
|
|
|
/* check for last frame */
|
|
if (xfer->nframes == 1) {
|
|
/* no STATUS stage yet, SETUP is last */
|
|
if (xfer->flags_int.control_act)
|
|
temp.setup_alt_next = 0;
|
|
}
|
|
|
|
dwc_otg_setup_standard_chain_sub(&temp);
|
|
}
|
|
x = 1;
|
|
} else {
|
|
x = 0;
|
|
}
|
|
|
|
if (x != xfer->nframes) {
|
|
if (xfer->endpointno & UE_DIR_IN) {
|
|
if (is_host) {
|
|
temp.func = &dwc_otg_host_data_rx;
|
|
need_sync = 0;
|
|
} else {
|
|
temp.func = &dwc_otg_data_tx;
|
|
need_sync = 1;
|
|
}
|
|
} else {
|
|
if (is_host) {
|
|
temp.func = &dwc_otg_host_data_tx;
|
|
need_sync = 0;
|
|
} else {
|
|
temp.func = &dwc_otg_data_rx;
|
|
need_sync = 0;
|
|
}
|
|
}
|
|
|
|
/* setup "pc" pointer */
|
|
temp.pc = xfer->frbuffers + x;
|
|
} else {
|
|
need_sync = 0;
|
|
}
|
|
while (x != xfer->nframes) {
|
|
|
|
/* DATA0 / DATA1 message */
|
|
|
|
temp.len = xfer->frlengths[x];
|
|
|
|
x++;
|
|
|
|
if (x == xfer->nframes) {
|
|
if (xfer->flags_int.control_xfr) {
|
|
if (xfer->flags_int.control_act) {
|
|
temp.setup_alt_next = 0;
|
|
}
|
|
} else {
|
|
temp.setup_alt_next = 0;
|
|
}
|
|
}
|
|
if (temp.len == 0) {
|
|
|
|
/* make sure that we send an USB packet */
|
|
|
|
temp.short_pkt = 0;
|
|
|
|
} else {
|
|
|
|
/* regular data transfer */
|
|
|
|
temp.short_pkt = (xfer->flags.force_short_xfer ? 0 : 1);
|
|
}
|
|
|
|
dwc_otg_setup_standard_chain_sub(&temp);
|
|
|
|
if (xfer->flags_int.isochronous_xfr) {
|
|
temp.offset += temp.len;
|
|
} else {
|
|
/* get next Page Cache pointer */
|
|
temp.pc = xfer->frbuffers + x;
|
|
}
|
|
}
|
|
|
|
if (xfer->flags_int.control_xfr) {
|
|
|
|
/* always setup a valid "pc" pointer for status and sync */
|
|
temp.pc = xfer->frbuffers + 0;
|
|
temp.len = 0;
|
|
temp.short_pkt = 0;
|
|
temp.setup_alt_next = 0;
|
|
|
|
/* check if we need to sync */
|
|
if (need_sync) {
|
|
/* we need a SYNC point after TX */
|
|
temp.func = &dwc_otg_data_tx_sync;
|
|
dwc_otg_setup_standard_chain_sub(&temp);
|
|
}
|
|
|
|
/* check if we should append a status stage */
|
|
if (!xfer->flags_int.control_act) {
|
|
|
|
/*
|
|
* Send a DATA1 message and invert the current
|
|
* endpoint direction.
|
|
*/
|
|
if (xfer->endpointno & UE_DIR_IN) {
|
|
if (is_host) {
|
|
temp.func = &dwc_otg_host_data_tx;
|
|
need_sync = 0;
|
|
} else {
|
|
temp.func = &dwc_otg_data_rx;
|
|
need_sync = 0;
|
|
}
|
|
} else {
|
|
if (is_host) {
|
|
temp.func = &dwc_otg_host_data_rx;
|
|
need_sync = 0;
|
|
} else {
|
|
temp.func = &dwc_otg_data_tx;
|
|
need_sync = 1;
|
|
}
|
|
}
|
|
|
|
dwc_otg_setup_standard_chain_sub(&temp);
|
|
|
|
/* data toggle should be DATA1 */
|
|
td = temp.td;
|
|
td->set_toggle = 1;
|
|
|
|
if (need_sync) {
|
|
/* we need a SYNC point after TX */
|
|
temp.func = &dwc_otg_data_tx_sync;
|
|
dwc_otg_setup_standard_chain_sub(&temp);
|
|
}
|
|
}
|
|
} else {
|
|
/* check if we need to sync */
|
|
if (need_sync) {
|
|
|
|
temp.pc = xfer->frbuffers + 0;
|
|
temp.len = 0;
|
|
temp.short_pkt = 0;
|
|
temp.setup_alt_next = 0;
|
|
|
|
/* we need a SYNC point after TX */
|
|
temp.func = &dwc_otg_data_tx_sync;
|
|
dwc_otg_setup_standard_chain_sub(&temp);
|
|
}
|
|
}
|
|
|
|
/* must have at least one frame! */
|
|
td = temp.td;
|
|
xfer->td_transfer_last = td;
|
|
|
|
if (is_host) {
|
|
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t hcchar;
|
|
uint32_t hcsplt;
|
|
uint8_t xfer_type;
|
|
|
|
sc = DWC_OTG_BUS2SC(xfer->xroot->bus);
|
|
xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE;
|
|
|
|
/* get first again */
|
|
td = xfer->td_transfer_first;
|
|
td->toggle = (xfer->endpoint->toggle_next ? 1 : 0);
|
|
|
|
hcchar =
|
|
(xfer->address << HCCHAR_DEVADDR_SHIFT) |
|
|
(xfer_type << HCCHAR_EPTYPE_SHIFT) |
|
|
((xfer->endpointno & UE_ADDR) << HCCHAR_EPNUM_SHIFT) |
|
|
(xfer->max_packet_size << HCCHAR_MPS_SHIFT) |
|
|
HCCHAR_CHENA;
|
|
|
|
if (usbd_get_speed(xfer->xroot->udev) == USB_SPEED_LOW)
|
|
hcchar |= HCCHAR_LSPDDEV;
|
|
if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN)
|
|
hcchar |= HCCHAR_EPDIR_IN;
|
|
|
|
switch (xfer->xroot->udev->speed) {
|
|
case USB_SPEED_FULL:
|
|
case USB_SPEED_LOW:
|
|
/* check if root HUB port is running High Speed */
|
|
if (sc->sc_flags.status_high_speed != 0) {
|
|
hcsplt = HCSPLT_SPLTENA |
|
|
(xfer->xroot->udev->hs_port_no <<
|
|
HCSPLT_PRTADDR_SHIFT) |
|
|
(xfer->xroot->udev->hs_hub_addr <<
|
|
HCSPLT_HUBADDR_SHIFT);
|
|
if (xfer_type == UE_ISOCHRONOUS) /* XXX */
|
|
hcsplt |= (3 << HCSPLT_XACTPOS_SHIFT);
|
|
} else {
|
|
hcsplt = 0;
|
|
}
|
|
if (xfer_type == UE_INTERRUPT) {
|
|
uint32_t ival;
|
|
ival = xfer->interval / DWC_OTG_HOST_TIMER_RATE;
|
|
if (ival == 0)
|
|
ival = 1;
|
|
else if (ival > 127)
|
|
ival = 127;
|
|
td->tmr_val = sc->sc_tmr_val + ival;
|
|
td->tmr_res = ival;
|
|
}
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
hcsplt = 0;
|
|
if (xfer_type == UE_ISOCHRONOUS ||
|
|
xfer_type == UE_INTERRUPT) {
|
|
hcchar |= ((xfer->max_packet_count & 3)
|
|
<< HCCHAR_MC_SHIFT);
|
|
}
|
|
if (xfer_type == UE_INTERRUPT) {
|
|
uint32_t ival;
|
|
ival = xfer->interval / DWC_OTG_HOST_TIMER_RATE;
|
|
if (ival == 0)
|
|
ival = 1;
|
|
else if (ival > 127)
|
|
ival = 127;
|
|
td->tmr_val = sc->sc_tmr_val + ival;
|
|
td->tmr_res = ival;
|
|
}
|
|
break;
|
|
default:
|
|
hcsplt = 0;
|
|
break;
|
|
}
|
|
|
|
if (xfer_type == UE_ISOCHRONOUS) {
|
|
td->tmr_val = xfer->endpoint->isoc_next & 0xFF;
|
|
td->tmr_res = 1 << usbd_xfer_get_fps_shift(xfer);
|
|
} else if (xfer_type != UE_INTERRUPT) {
|
|
td->tmr_val = 0;
|
|
td->tmr_res = 0;
|
|
}
|
|
|
|
/* store configuration in all TD's */
|
|
while (1) {
|
|
td->hcchar = hcchar;
|
|
td->hcsplt = hcsplt;
|
|
|
|
if (((void *)td) == xfer->td_transfer_last)
|
|
break;
|
|
|
|
td = td->obj_next;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_timeout(void *arg)
|
|
{
|
|
struct usb_xfer *xfer = arg;
|
|
|
|
DPRINTF("xfer=%p\n", xfer);
|
|
|
|
USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
|
|
|
|
/* transfer is transferred */
|
|
dwc_otg_device_done(xfer, USB_ERR_TIMEOUT);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_start_standard_chain(struct usb_xfer *xfer)
|
|
{
|
|
DPRINTFN(9, "\n");
|
|
|
|
/* poll one time - will turn on interrupts */
|
|
if (dwc_otg_xfer_do_fifo(xfer)) {
|
|
|
|
/* put transfer on interrupt queue */
|
|
usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer);
|
|
|
|
/* start timeout, if any */
|
|
if (xfer->timeout != 0) {
|
|
usbd_transfer_timeout_ms(xfer,
|
|
&dwc_otg_timeout, xfer->timeout);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_root_intr(struct dwc_otg_softc *sc)
|
|
{
|
|
DPRINTFN(9, "\n");
|
|
|
|
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
|
|
|
|
/* set port bit */
|
|
sc->sc_hub_idata[0] = 0x02; /* we only have one port */
|
|
|
|
uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata,
|
|
sizeof(sc->sc_hub_idata));
|
|
}
|
|
|
|
static usb_error_t
|
|
dwc_otg_standard_done_sub(struct usb_xfer *xfer)
|
|
{
|
|
struct dwc_otg_td *td;
|
|
uint32_t len;
|
|
usb_error_t error;
|
|
|
|
DPRINTFN(9, "\n");
|
|
|
|
td = xfer->td_transfer_cache;
|
|
|
|
do {
|
|
len = td->remainder;
|
|
|
|
/* store last data toggle */
|
|
xfer->endpoint->toggle_next = td->toggle;
|
|
|
|
if (xfer->aframes != xfer->nframes) {
|
|
/*
|
|
* Verify the length and subtract
|
|
* the remainder from "frlengths[]":
|
|
*/
|
|
if (len > xfer->frlengths[xfer->aframes]) {
|
|
td->error_any = 1;
|
|
} else {
|
|
xfer->frlengths[xfer->aframes] -= len;
|
|
}
|
|
}
|
|
/* Check for transfer error */
|
|
if (td->error_any) {
|
|
/* the transfer is finished */
|
|
error = (td->error_stall ?
|
|
USB_ERR_STALLED : USB_ERR_IOERROR);
|
|
td = NULL;
|
|
break;
|
|
}
|
|
/* Check for short transfer */
|
|
if (len > 0) {
|
|
if (xfer->flags_int.short_frames_ok) {
|
|
/* follow alt next */
|
|
if (td->alt_next) {
|
|
td = td->obj_next;
|
|
} else {
|
|
td = NULL;
|
|
}
|
|
} else {
|
|
/* the transfer is finished */
|
|
td = NULL;
|
|
}
|
|
error = 0;
|
|
break;
|
|
}
|
|
td = td->obj_next;
|
|
|
|
/* this USB frame is complete */
|
|
error = 0;
|
|
break;
|
|
|
|
} while (0);
|
|
|
|
/* update transfer cache */
|
|
|
|
xfer->td_transfer_cache = td;
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_standard_done(struct usb_xfer *xfer)
|
|
{
|
|
usb_error_t err = 0;
|
|
|
|
DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n",
|
|
xfer, xfer->endpoint);
|
|
|
|
/* reset scanner */
|
|
|
|
xfer->td_transfer_cache = xfer->td_transfer_first;
|
|
|
|
if (xfer->flags_int.control_xfr) {
|
|
|
|
if (xfer->flags_int.control_hdr) {
|
|
|
|
err = dwc_otg_standard_done_sub(xfer);
|
|
}
|
|
xfer->aframes = 1;
|
|
|
|
if (xfer->td_transfer_cache == NULL) {
|
|
goto done;
|
|
}
|
|
}
|
|
while (xfer->aframes != xfer->nframes) {
|
|
|
|
err = dwc_otg_standard_done_sub(xfer);
|
|
xfer->aframes++;
|
|
|
|
if (xfer->td_transfer_cache == NULL) {
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
if (xfer->flags_int.control_xfr &&
|
|
!xfer->flags_int.control_act) {
|
|
|
|
err = dwc_otg_standard_done_sub(xfer);
|
|
}
|
|
done:
|
|
dwc_otg_device_done(xfer, err);
|
|
}
|
|
|
|
/*------------------------------------------------------------------------*
|
|
* dwc_otg_device_done
|
|
*
|
|
* NOTE: this function can be called more than one time on the
|
|
* same USB transfer!
|
|
*------------------------------------------------------------------------*/
|
|
static void
|
|
dwc_otg_device_done(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
DPRINTFN(9, "xfer=%p, endpoint=%p, error=%d\n",
|
|
xfer, xfer->endpoint, error);
|
|
|
|
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
|
|
DPRINTFN(15, "disabled interrupts!\n");
|
|
} else {
|
|
struct dwc_otg_td *td;
|
|
|
|
td = xfer->td_transfer_first;
|
|
|
|
if (td != NULL)
|
|
dwc_otg_host_channel_free(td);
|
|
}
|
|
/* dequeue transfer and start next transfer */
|
|
usbd_transfer_done(xfer, error);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_xfer_stall(struct usb_xfer *xfer)
|
|
{
|
|
dwc_otg_device_done(xfer, USB_ERR_STALLED);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_set_stall(struct usb_device *udev,
|
|
struct usb_endpoint *ep, uint8_t *did_stall)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint32_t temp;
|
|
uint32_t reg;
|
|
uint8_t ep_no;
|
|
|
|
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
|
|
|
|
/* check mode */
|
|
if (udev->flags.usb_mode != USB_MODE_DEVICE) {
|
|
/* not supported */
|
|
return;
|
|
}
|
|
|
|
sc = DWC_OTG_BUS2SC(udev->bus);
|
|
|
|
/* get endpoint address */
|
|
ep_no = ep->edesc->bEndpointAddress;
|
|
|
|
DPRINTFN(5, "endpoint=0x%x\n", ep_no);
|
|
|
|
if (ep_no & UE_DIR_IN) {
|
|
reg = DOTG_DIEPCTL(ep_no & UE_ADDR);
|
|
temp = sc->sc_in_ctl[ep_no & UE_ADDR];
|
|
} else {
|
|
reg = DOTG_DOEPCTL(ep_no & UE_ADDR);
|
|
temp = sc->sc_out_ctl[ep_no & UE_ADDR];
|
|
}
|
|
|
|
/* disable and stall endpoint */
|
|
DWC_OTG_WRITE_4(sc, reg, temp | DOEPCTL_EPDIS);
|
|
DWC_OTG_WRITE_4(sc, reg, temp | DOEPCTL_STALL);
|
|
|
|
/* clear active OUT ep */
|
|
if (!(ep_no & UE_DIR_IN)) {
|
|
|
|
sc->sc_active_rx_ep &= ~(1U << (ep_no & UE_ADDR));
|
|
|
|
if (sc->sc_last_rx_status != 0 &&
|
|
(ep_no & UE_ADDR) == GRXSTSRD_CHNUM_GET(
|
|
sc->sc_last_rx_status)) {
|
|
/* dump data */
|
|
dwc_otg_common_rx_ack(sc);
|
|
/* poll interrupt */
|
|
dwc_otg_interrupt_poll(sc);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_clear_stall_sub(struct dwc_otg_softc *sc, uint32_t mps,
|
|
uint8_t ep_no, uint8_t ep_type, uint8_t ep_dir)
|
|
{
|
|
uint32_t reg;
|
|
uint32_t temp;
|
|
|
|
if (ep_type == UE_CONTROL) {
|
|
/* clearing stall is not needed */
|
|
return;
|
|
}
|
|
|
|
if (ep_dir) {
|
|
reg = DOTG_DIEPCTL(ep_no);
|
|
} else {
|
|
reg = DOTG_DOEPCTL(ep_no);
|
|
sc->sc_active_rx_ep |= (1U << ep_no);
|
|
}
|
|
|
|
/* round up and mask away the multiplier count */
|
|
mps = (mps + 3) & 0x7FC;
|
|
|
|
if (ep_type == UE_BULK) {
|
|
temp = DIEPCTL_EPTYPE_SET(
|
|
DIEPCTL_EPTYPE_BULK) |
|
|
DIEPCTL_USBACTEP;
|
|
} else if (ep_type == UE_INTERRUPT) {
|
|
temp = DIEPCTL_EPTYPE_SET(
|
|
DIEPCTL_EPTYPE_INTERRUPT) |
|
|
DIEPCTL_USBACTEP;
|
|
} else {
|
|
temp = DIEPCTL_EPTYPE_SET(
|
|
DIEPCTL_EPTYPE_ISOC) |
|
|
DIEPCTL_USBACTEP;
|
|
}
|
|
|
|
temp |= DIEPCTL_MPS_SET(mps);
|
|
temp |= DIEPCTL_TXFNUM_SET(ep_no);
|
|
|
|
if (ep_dir)
|
|
sc->sc_in_ctl[ep_no] = temp;
|
|
else
|
|
sc->sc_out_ctl[ep_no] = temp;
|
|
|
|
DWC_OTG_WRITE_4(sc, reg, temp | DOEPCTL_EPDIS);
|
|
DWC_OTG_WRITE_4(sc, reg, temp | DOEPCTL_SETD0PID);
|
|
DWC_OTG_WRITE_4(sc, reg, temp | DIEPCTL_SNAK);
|
|
|
|
/* we only reset the transmit FIFO */
|
|
if (ep_dir) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_GRSTCTL,
|
|
GRSTCTL_TXFIFO(ep_no) |
|
|
GRSTCTL_TXFFLSH);
|
|
|
|
DWC_OTG_WRITE_4(sc,
|
|
DOTG_DIEPTSIZ(ep_no), 0);
|
|
}
|
|
|
|
/* poll interrupt */
|
|
dwc_otg_interrupt_poll(sc);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_clear_stall(struct usb_device *udev, struct usb_endpoint *ep)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
struct usb_endpoint_descriptor *ed;
|
|
|
|
DPRINTFN(5, "endpoint=%p\n", ep);
|
|
|
|
USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
|
|
|
|
/* check mode */
|
|
if (udev->flags.usb_mode != USB_MODE_DEVICE) {
|
|
/* not supported */
|
|
return;
|
|
}
|
|
/* get softc */
|
|
sc = DWC_OTG_BUS2SC(udev->bus);
|
|
|
|
/* get endpoint descriptor */
|
|
ed = ep->edesc;
|
|
|
|
/* reset endpoint */
|
|
dwc_otg_clear_stall_sub(sc,
|
|
UGETW(ed->wMaxPacketSize),
|
|
(ed->bEndpointAddress & UE_ADDR),
|
|
(ed->bmAttributes & UE_XFERTYPE),
|
|
(ed->bEndpointAddress & (UE_DIR_IN | UE_DIR_OUT)));
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_state_change(struct usb_device *udev)
|
|
{
|
|
struct dwc_otg_softc *sc;
|
|
uint8_t x;
|
|
|
|
/* check mode */
|
|
if (udev->flags.usb_mode != USB_MODE_DEVICE) {
|
|
/* not supported */
|
|
return;
|
|
}
|
|
|
|
/* get softc */
|
|
sc = DWC_OTG_BUS2SC(udev->bus);
|
|
|
|
/* deactivate all other endpoint but the control endpoint */
|
|
if (udev->state == USB_STATE_CONFIGURED ||
|
|
udev->state == USB_STATE_ADDRESSED) {
|
|
|
|
USB_BUS_LOCK(&sc->sc_bus);
|
|
|
|
for (x = 1; x != sc->sc_dev_ep_max; x++) {
|
|
|
|
if (x < sc->sc_dev_in_ep_max) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPCTL(x),
|
|
DIEPCTL_EPDIS);
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPCTL(x), 0);
|
|
}
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPCTL(x),
|
|
DOEPCTL_EPDIS);
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPCTL(x), 0);
|
|
}
|
|
USB_BUS_UNLOCK(&sc->sc_bus);
|
|
}
|
|
}
|
|
|
|
int
|
|
dwc_otg_init(struct dwc_otg_softc *sc)
|
|
{
|
|
uint32_t temp;
|
|
|
|
DPRINTF("start\n");
|
|
|
|
/* set up the bus structure */
|
|
sc->sc_bus.usbrev = USB_REV_2_0;
|
|
sc->sc_bus.methods = &dwc_otg_bus_methods;
|
|
|
|
usb_callout_init_mtx(&sc->sc_timer,
|
|
&sc->sc_bus.bus_mtx, 0);
|
|
|
|
USB_BUS_LOCK(&sc->sc_bus);
|
|
|
|
/* turn on clocks */
|
|
dwc_otg_clocks_on(sc);
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GSNPSID);
|
|
DPRINTF("Version = 0x%08x\n", temp);
|
|
|
|
/* disconnect */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCTL,
|
|
DCTL_SFTDISCON);
|
|
|
|
/* wait for host to detect disconnect */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 32);
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_GRSTCTL,
|
|
GRSTCTL_CSFTRST);
|
|
|
|
/* wait a little bit for block to reset */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 128);
|
|
|
|
switch (sc->sc_mode) {
|
|
case DWC_MODE_DEVICE:
|
|
temp = GUSBCFG_FORCEDEVMODE;
|
|
break;
|
|
case DWC_MODE_HOST:
|
|
temp = GUSBCFG_FORCEHOSTMODE;
|
|
break;
|
|
default:
|
|
temp = 0;
|
|
break;
|
|
}
|
|
|
|
/* select HSIC or non-HSIC mode */
|
|
if (dwc_otg_use_hsic) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_GUSBCFG,
|
|
GUSBCFG_PHYIF |
|
|
GUSBCFG_TRD_TIM_SET(5) | temp);
|
|
DWC_OTG_WRITE_4(sc, DOTG_GOTGCTL,
|
|
0x000000EC);
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GLPMCFG);
|
|
DWC_OTG_WRITE_4(sc, DOTG_GLPMCFG,
|
|
temp & ~GLPMCFG_HSIC_CONN);
|
|
DWC_OTG_WRITE_4(sc, DOTG_GLPMCFG,
|
|
temp | GLPMCFG_HSIC_CONN);
|
|
} else {
|
|
DWC_OTG_WRITE_4(sc, DOTG_GUSBCFG,
|
|
GUSBCFG_ULPI_UTMI_SEL |
|
|
GUSBCFG_TRD_TIM_SET(5) | temp);
|
|
DWC_OTG_WRITE_4(sc, DOTG_GOTGCTL, 0);
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GLPMCFG);
|
|
DWC_OTG_WRITE_4(sc, DOTG_GLPMCFG,
|
|
temp & ~GLPMCFG_HSIC_CONN);
|
|
}
|
|
|
|
/* clear global nak */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCTL,
|
|
DCTL_CGOUTNAK |
|
|
DCTL_CGNPINNAK);
|
|
|
|
/* disable USB port */
|
|
DWC_OTG_WRITE_4(sc, DOTG_PCGCCTL, 0xFFFFFFFF);
|
|
|
|
/* wait 10ms */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 100);
|
|
|
|
/* enable USB port */
|
|
DWC_OTG_WRITE_4(sc, DOTG_PCGCCTL, 0);
|
|
|
|
/* wait 10ms */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 100);
|
|
|
|
/* pull up D+ */
|
|
dwc_otg_pull_up(sc);
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GHWCFG3);
|
|
|
|
sc->sc_fifo_size = 4 * GHWCFG3_DFIFODEPTH_GET(temp);
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GHWCFG2);
|
|
|
|
sc->sc_dev_ep_max = GHWCFG2_NUMDEVEPS_GET(temp);
|
|
|
|
if (sc->sc_dev_ep_max > DWC_OTG_MAX_ENDPOINTS)
|
|
sc->sc_dev_ep_max = DWC_OTG_MAX_ENDPOINTS;
|
|
|
|
sc->sc_host_ch_max = GHWCFG2_NUMHSTCHNL_GET(temp);
|
|
|
|
if (sc->sc_host_ch_max > DWC_OTG_MAX_CHANNELS)
|
|
sc->sc_host_ch_max = DWC_OTG_MAX_CHANNELS;
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GHWCFG4);
|
|
|
|
sc->sc_dev_in_ep_max = GHWCFG4_NUM_IN_EP_GET(temp);
|
|
|
|
DPRINTF("Total FIFO size = %d bytes, Device EPs = %d/%d Host CHs = %d\n",
|
|
sc->sc_fifo_size, sc->sc_dev_ep_max, sc->sc_dev_in_ep_max,
|
|
sc->sc_host_ch_max);
|
|
|
|
/* setup FIFO */
|
|
if (dwc_otg_init_fifo(sc, DWC_MODE_OTG))
|
|
return (EINVAL);
|
|
|
|
/* enable interrupts */
|
|
sc->sc_irq_mask = DWC_OTG_MSK_GINT_ENABLED;
|
|
DWC_OTG_WRITE_4(sc, DOTG_GINTMSK, sc->sc_irq_mask);
|
|
|
|
if (sc->sc_mode == DWC_MODE_OTG || sc->sc_mode == DWC_MODE_DEVICE) {
|
|
|
|
/* enable all endpoint interrupts */
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GHWCFG2);
|
|
if (temp & GHWCFG2_MPI) {
|
|
uint8_t x;
|
|
|
|
DPRINTF("Multi Process Interrupts\n");
|
|
|
|
for (x = 0; x != sc->sc_dev_in_ep_max; x++) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPEACHINTMSK(x),
|
|
DIEPMSK_XFERCOMPLMSK);
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPEACHINTMSK(x), 0);
|
|
}
|
|
DWC_OTG_WRITE_4(sc, DOTG_DEACHINTMSK, 0xFFFF);
|
|
} else {
|
|
DWC_OTG_WRITE_4(sc, DOTG_DIEPMSK,
|
|
DIEPMSK_XFERCOMPLMSK);
|
|
DWC_OTG_WRITE_4(sc, DOTG_DOEPMSK, 0);
|
|
DWC_OTG_WRITE_4(sc, DOTG_DAINTMSK, 0xFFFF);
|
|
}
|
|
}
|
|
|
|
if (sc->sc_mode == DWC_MODE_OTG || sc->sc_mode == DWC_MODE_HOST) {
|
|
/* setup clocks */
|
|
temp = DWC_OTG_READ_4(sc, DOTG_HCFG);
|
|
temp &= ~(HCFG_FSLSSUPP | HCFG_FSLSPCLKSEL_MASK);
|
|
temp |= (1 << HCFG_FSLSPCLKSEL_SHIFT);
|
|
DWC_OTG_WRITE_4(sc, DOTG_HCFG, temp);
|
|
}
|
|
|
|
/* only enable global IRQ */
|
|
DWC_OTG_WRITE_4(sc, DOTG_GAHBCFG,
|
|
GAHBCFG_GLBLINTRMSK);
|
|
|
|
/* turn off clocks */
|
|
dwc_otg_clocks_off(sc);
|
|
|
|
/* read initial VBUS state */
|
|
|
|
temp = DWC_OTG_READ_4(sc, DOTG_GOTGCTL);
|
|
|
|
DPRINTFN(5, "GOTCTL=0x%08x\n", temp);
|
|
|
|
dwc_otg_vbus_interrupt(sc,
|
|
(temp & (GOTGCTL_ASESVLD | GOTGCTL_BSESVLD)) ? 1 : 0);
|
|
|
|
USB_BUS_UNLOCK(&sc->sc_bus);
|
|
|
|
/* catch any lost interrupts */
|
|
|
|
dwc_otg_do_poll(&sc->sc_bus);
|
|
|
|
return (0); /* success */
|
|
}
|
|
|
|
void
|
|
dwc_otg_uninit(struct dwc_otg_softc *sc)
|
|
{
|
|
USB_BUS_LOCK(&sc->sc_bus);
|
|
|
|
/* stop host timer */
|
|
dwc_otg_timer_stop(sc);
|
|
|
|
/* set disconnect */
|
|
DWC_OTG_WRITE_4(sc, DOTG_DCTL,
|
|
DCTL_SFTDISCON);
|
|
|
|
/* turn off global IRQ */
|
|
DWC_OTG_WRITE_4(sc, DOTG_GAHBCFG, 0);
|
|
|
|
sc->sc_flags.port_enabled = 0;
|
|
sc->sc_flags.port_powered = 0;
|
|
sc->sc_flags.status_vbus = 0;
|
|
sc->sc_flags.status_bus_reset = 0;
|
|
sc->sc_flags.status_suspend = 0;
|
|
sc->sc_flags.change_suspend = 0;
|
|
sc->sc_flags.change_connect = 1;
|
|
|
|
dwc_otg_pull_down(sc);
|
|
dwc_otg_clocks_off(sc);
|
|
|
|
USB_BUS_UNLOCK(&sc->sc_bus);
|
|
|
|
usb_callout_drain(&sc->sc_timer);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_suspend(struct dwc_otg_softc *sc)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dwc_otg_resume(struct dwc_otg_softc *sc)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dwc_otg_do_poll(struct usb_bus *bus)
|
|
{
|
|
struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(bus);
|
|
|
|
USB_BUS_LOCK(&sc->sc_bus);
|
|
dwc_otg_interrupt_poll(sc);
|
|
USB_BUS_UNLOCK(&sc->sc_bus);
|
|
}
|
|
|
|
/*------------------------------------------------------------------------*
|
|
* DWC OTG bulk support
|
|
* DWC OTG control support
|
|
* DWC OTG interrupt support
|
|
*------------------------------------------------------------------------*/
|
|
static void
|
|
dwc_otg_device_non_isoc_open(struct usb_xfer *xfer)
|
|
{
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_non_isoc_close(struct usb_xfer *xfer)
|
|
{
|
|
dwc_otg_device_done(xfer, USB_ERR_CANCELLED);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_non_isoc_enter(struct usb_xfer *xfer)
|
|
{
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_non_isoc_start(struct usb_xfer *xfer)
|
|
{
|
|
/* setup TDs */
|
|
dwc_otg_setup_standard_chain(xfer);
|
|
dwc_otg_start_standard_chain(xfer);
|
|
}
|
|
|
|
static const struct usb_pipe_methods dwc_otg_device_non_isoc_methods =
|
|
{
|
|
.open = dwc_otg_device_non_isoc_open,
|
|
.close = dwc_otg_device_non_isoc_close,
|
|
.enter = dwc_otg_device_non_isoc_enter,
|
|
.start = dwc_otg_device_non_isoc_start,
|
|
};
|
|
|
|
/*------------------------------------------------------------------------*
|
|
* DWC OTG full speed isochronous support
|
|
*------------------------------------------------------------------------*/
|
|
static void
|
|
dwc_otg_device_isoc_open(struct usb_xfer *xfer)
|
|
{
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_isoc_close(struct usb_xfer *xfer)
|
|
{
|
|
dwc_otg_device_done(xfer, USB_ERR_CANCELLED);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_isoc_enter(struct usb_xfer *xfer)
|
|
{
|
|
struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(xfer->xroot->bus);
|
|
uint32_t temp;
|
|
uint32_t nframes;
|
|
uint8_t shift = usbd_xfer_get_fps_shift(xfer);
|
|
|
|
DPRINTFN(6, "xfer=%p next=%d nframes=%d\n",
|
|
xfer, xfer->endpoint->isoc_next, xfer->nframes);
|
|
|
|
if (xfer->xroot->udev->flags.usb_mode == USB_MODE_HOST) {
|
|
temp = DWC_OTG_READ_4(sc, DOTG_HFNUM);
|
|
|
|
/* get the current frame index */
|
|
nframes = (temp & HFNUM_FRNUM_MASK);
|
|
} else {
|
|
temp = DWC_OTG_READ_4(sc, DOTG_DSTS);
|
|
|
|
/* get the current frame index */
|
|
nframes = DSTS_SOFFN_GET(temp);
|
|
}
|
|
|
|
if (sc->sc_flags.status_high_speed)
|
|
nframes /= 8;
|
|
|
|
nframes &= DWC_OTG_FRAME_MASK;
|
|
|
|
/*
|
|
* check if the frame index is within the window where the frames
|
|
* will be inserted
|
|
*/
|
|
temp = (nframes - xfer->endpoint->isoc_next) & DWC_OTG_FRAME_MASK;
|
|
|
|
if ((xfer->endpoint->is_synced == 0) ||
|
|
(temp < (((xfer->nframes << shift) + 7) / 8))) {
|
|
/*
|
|
* If there is data underflow or the pipe queue is
|
|
* empty we schedule the transfer a few frames ahead
|
|
* of the current frame position. Else two isochronous
|
|
* transfers might overlap.
|
|
*/
|
|
xfer->endpoint->isoc_next = (nframes + 3) & DWC_OTG_FRAME_MASK;
|
|
xfer->endpoint->is_synced = 1;
|
|
DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next);
|
|
}
|
|
/*
|
|
* compute how many milliseconds the insertion is ahead of the
|
|
* current frame position:
|
|
*/
|
|
temp = (xfer->endpoint->isoc_next - nframes) & DWC_OTG_FRAME_MASK;
|
|
|
|
/*
|
|
* pre-compute when the isochronous transfer will be finished:
|
|
*/
|
|
xfer->isoc_time_complete =
|
|
usb_isoc_time_expand(&sc->sc_bus, nframes) + temp +
|
|
(((xfer->nframes << shift) + 7) / 8);
|
|
|
|
/* setup TDs */
|
|
dwc_otg_setup_standard_chain(xfer);
|
|
|
|
/* compute frame number for next insertion */
|
|
xfer->endpoint->isoc_next += (xfer->nframes << shift);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_isoc_start(struct usb_xfer *xfer)
|
|
{
|
|
/* start TD chain */
|
|
dwc_otg_start_standard_chain(xfer);
|
|
}
|
|
|
|
static const struct usb_pipe_methods dwc_otg_device_isoc_methods =
|
|
{
|
|
.open = dwc_otg_device_isoc_open,
|
|
.close = dwc_otg_device_isoc_close,
|
|
.enter = dwc_otg_device_isoc_enter,
|
|
.start = dwc_otg_device_isoc_start,
|
|
};
|
|
|
|
/*------------------------------------------------------------------------*
|
|
* DWC OTG root control support
|
|
*------------------------------------------------------------------------*
|
|
* Simulate a hardware HUB by handling all the necessary requests.
|
|
*------------------------------------------------------------------------*/
|
|
|
|
static const struct usb_device_descriptor dwc_otg_devd = {
|
|
.bLength = sizeof(struct usb_device_descriptor),
|
|
.bDescriptorType = UDESC_DEVICE,
|
|
.bcdUSB = {0x00, 0x02},
|
|
.bDeviceClass = UDCLASS_HUB,
|
|
.bDeviceSubClass = UDSUBCLASS_HUB,
|
|
.bDeviceProtocol = UDPROTO_HSHUBSTT,
|
|
.bMaxPacketSize = 64,
|
|
.bcdDevice = {0x00, 0x01},
|
|
.iManufacturer = 1,
|
|
.iProduct = 2,
|
|
.bNumConfigurations = 1,
|
|
};
|
|
|
|
static const struct dwc_otg_config_desc dwc_otg_confd = {
|
|
.confd = {
|
|
.bLength = sizeof(struct usb_config_descriptor),
|
|
.bDescriptorType = UDESC_CONFIG,
|
|
.wTotalLength[0] = sizeof(dwc_otg_confd),
|
|
.bNumInterface = 1,
|
|
.bConfigurationValue = 1,
|
|
.iConfiguration = 0,
|
|
.bmAttributes = UC_SELF_POWERED,
|
|
.bMaxPower = 0,
|
|
},
|
|
.ifcd = {
|
|
.bLength = sizeof(struct usb_interface_descriptor),
|
|
.bDescriptorType = UDESC_INTERFACE,
|
|
.bNumEndpoints = 1,
|
|
.bInterfaceClass = UICLASS_HUB,
|
|
.bInterfaceSubClass = UISUBCLASS_HUB,
|
|
.bInterfaceProtocol = 0,
|
|
},
|
|
.endpd = {
|
|
.bLength = sizeof(struct usb_endpoint_descriptor),
|
|
.bDescriptorType = UDESC_ENDPOINT,
|
|
.bEndpointAddress = (UE_DIR_IN | DWC_OTG_INTR_ENDPT),
|
|
.bmAttributes = UE_INTERRUPT,
|
|
.wMaxPacketSize[0] = 8,
|
|
.bInterval = 255,
|
|
},
|
|
};
|
|
|
|
#define HSETW(ptr, val) ptr = { (uint8_t)(val), (uint8_t)((val) >> 8) }
|
|
|
|
static const struct usb_hub_descriptor_min dwc_otg_hubd = {
|
|
.bDescLength = sizeof(dwc_otg_hubd),
|
|
.bDescriptorType = UDESC_HUB,
|
|
.bNbrPorts = 1,
|
|
HSETW(.wHubCharacteristics, (UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL)),
|
|
.bPwrOn2PwrGood = 50,
|
|
.bHubContrCurrent = 0,
|
|
.DeviceRemovable = {0}, /* port is removable */
|
|
};
|
|
|
|
#define STRING_VENDOR \
|
|
"D\0W\0C\0O\0T\0G"
|
|
|
|
#define STRING_PRODUCT \
|
|
"O\0T\0G\0 \0R\0o\0o\0t\0 \0H\0U\0B"
|
|
|
|
USB_MAKE_STRING_DESC(STRING_VENDOR, dwc_otg_vendor);
|
|
USB_MAKE_STRING_DESC(STRING_PRODUCT, dwc_otg_product);
|
|
|
|
static usb_error_t
|
|
dwc_otg_roothub_exec(struct usb_device *udev,
|
|
struct usb_device_request *req, const void **pptr, uint16_t *plength)
|
|
{
|
|
struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(udev->bus);
|
|
const void *ptr;
|
|
uint16_t len;
|
|
uint16_t value;
|
|
uint16_t index;
|
|
usb_error_t err;
|
|
|
|
USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED);
|
|
|
|
/* buffer reset */
|
|
ptr = (const void *)&sc->sc_hub_temp;
|
|
len = 0;
|
|
err = 0;
|
|
|
|
value = UGETW(req->wValue);
|
|
index = UGETW(req->wIndex);
|
|
|
|
/* demultiplex the control request */
|
|
|
|
switch (req->bmRequestType) {
|
|
case UT_READ_DEVICE:
|
|
switch (req->bRequest) {
|
|
case UR_GET_DESCRIPTOR:
|
|
goto tr_handle_get_descriptor;
|
|
case UR_GET_CONFIG:
|
|
goto tr_handle_get_config;
|
|
case UR_GET_STATUS:
|
|
goto tr_handle_get_status;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_WRITE_DEVICE:
|
|
switch (req->bRequest) {
|
|
case UR_SET_ADDRESS:
|
|
goto tr_handle_set_address;
|
|
case UR_SET_CONFIG:
|
|
goto tr_handle_set_config;
|
|
case UR_CLEAR_FEATURE:
|
|
goto tr_valid; /* nop */
|
|
case UR_SET_DESCRIPTOR:
|
|
goto tr_valid; /* nop */
|
|
case UR_SET_FEATURE:
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_WRITE_ENDPOINT:
|
|
switch (req->bRequest) {
|
|
case UR_CLEAR_FEATURE:
|
|
switch (UGETW(req->wValue)) {
|
|
case UF_ENDPOINT_HALT:
|
|
goto tr_handle_clear_halt;
|
|
case UF_DEVICE_REMOTE_WAKEUP:
|
|
goto tr_handle_clear_wakeup;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
case UR_SET_FEATURE:
|
|
switch (UGETW(req->wValue)) {
|
|
case UF_ENDPOINT_HALT:
|
|
goto tr_handle_set_halt;
|
|
case UF_DEVICE_REMOTE_WAKEUP:
|
|
goto tr_handle_set_wakeup;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
case UR_SYNCH_FRAME:
|
|
goto tr_valid; /* nop */
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_READ_ENDPOINT:
|
|
switch (req->bRequest) {
|
|
case UR_GET_STATUS:
|
|
goto tr_handle_get_ep_status;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_WRITE_INTERFACE:
|
|
switch (req->bRequest) {
|
|
case UR_SET_INTERFACE:
|
|
goto tr_handle_set_interface;
|
|
case UR_CLEAR_FEATURE:
|
|
goto tr_valid; /* nop */
|
|
case UR_SET_FEATURE:
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_READ_INTERFACE:
|
|
switch (req->bRequest) {
|
|
case UR_GET_INTERFACE:
|
|
goto tr_handle_get_interface;
|
|
case UR_GET_STATUS:
|
|
goto tr_handle_get_iface_status;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_WRITE_CLASS_INTERFACE:
|
|
case UT_WRITE_VENDOR_INTERFACE:
|
|
/* XXX forward */
|
|
break;
|
|
|
|
case UT_READ_CLASS_INTERFACE:
|
|
case UT_READ_VENDOR_INTERFACE:
|
|
/* XXX forward */
|
|
break;
|
|
|
|
case UT_WRITE_CLASS_DEVICE:
|
|
switch (req->bRequest) {
|
|
case UR_CLEAR_FEATURE:
|
|
goto tr_valid;
|
|
case UR_SET_DESCRIPTOR:
|
|
case UR_SET_FEATURE:
|
|
break;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_WRITE_CLASS_OTHER:
|
|
switch (req->bRequest) {
|
|
case UR_CLEAR_FEATURE:
|
|
goto tr_handle_clear_port_feature;
|
|
case UR_SET_FEATURE:
|
|
goto tr_handle_set_port_feature;
|
|
case UR_CLEAR_TT_BUFFER:
|
|
case UR_RESET_TT:
|
|
case UR_STOP_TT:
|
|
goto tr_valid;
|
|
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_READ_CLASS_OTHER:
|
|
switch (req->bRequest) {
|
|
case UR_GET_TT_STATE:
|
|
goto tr_handle_get_tt_state;
|
|
case UR_GET_STATUS:
|
|
goto tr_handle_get_port_status;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
|
|
case UT_READ_CLASS_DEVICE:
|
|
switch (req->bRequest) {
|
|
case UR_GET_DESCRIPTOR:
|
|
goto tr_handle_get_class_descriptor;
|
|
case UR_GET_STATUS:
|
|
goto tr_handle_get_class_status;
|
|
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
break;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
goto tr_valid;
|
|
|
|
tr_handle_get_descriptor:
|
|
switch (value >> 8) {
|
|
case UDESC_DEVICE:
|
|
if (value & 0xff) {
|
|
goto tr_stalled;
|
|
}
|
|
len = sizeof(dwc_otg_devd);
|
|
ptr = (const void *)&dwc_otg_devd;
|
|
goto tr_valid;
|
|
case UDESC_CONFIG:
|
|
if (value & 0xff) {
|
|
goto tr_stalled;
|
|
}
|
|
len = sizeof(dwc_otg_confd);
|
|
ptr = (const void *)&dwc_otg_confd;
|
|
goto tr_valid;
|
|
case UDESC_STRING:
|
|
switch (value & 0xff) {
|
|
case 0: /* Language table */
|
|
len = sizeof(usb_string_lang_en);
|
|
ptr = (const void *)&usb_string_lang_en;
|
|
goto tr_valid;
|
|
|
|
case 1: /* Vendor */
|
|
len = sizeof(dwc_otg_vendor);
|
|
ptr = (const void *)&dwc_otg_vendor;
|
|
goto tr_valid;
|
|
|
|
case 2: /* Product */
|
|
len = sizeof(dwc_otg_product);
|
|
ptr = (const void *)&dwc_otg_product;
|
|
goto tr_valid;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
goto tr_stalled;
|
|
}
|
|
goto tr_stalled;
|
|
|
|
tr_handle_get_config:
|
|
len = 1;
|
|
sc->sc_hub_temp.wValue[0] = sc->sc_conf;
|
|
goto tr_valid;
|
|
|
|
tr_handle_get_status:
|
|
len = 2;
|
|
USETW(sc->sc_hub_temp.wValue, UDS_SELF_POWERED);
|
|
goto tr_valid;
|
|
|
|
tr_handle_set_address:
|
|
if (value & 0xFF00) {
|
|
goto tr_stalled;
|
|
}
|
|
sc->sc_rt_addr = value;
|
|
goto tr_valid;
|
|
|
|
tr_handle_set_config:
|
|
if (value >= 2) {
|
|
goto tr_stalled;
|
|
}
|
|
sc->sc_conf = value;
|
|
goto tr_valid;
|
|
|
|
tr_handle_get_interface:
|
|
len = 1;
|
|
sc->sc_hub_temp.wValue[0] = 0;
|
|
goto tr_valid;
|
|
|
|
tr_handle_get_tt_state:
|
|
tr_handle_get_class_status:
|
|
tr_handle_get_iface_status:
|
|
tr_handle_get_ep_status:
|
|
len = 2;
|
|
USETW(sc->sc_hub_temp.wValue, 0);
|
|
goto tr_valid;
|
|
|
|
tr_handle_set_halt:
|
|
tr_handle_set_interface:
|
|
tr_handle_set_wakeup:
|
|
tr_handle_clear_wakeup:
|
|
tr_handle_clear_halt:
|
|
goto tr_valid;
|
|
|
|
tr_handle_clear_port_feature:
|
|
if (index != 1)
|
|
goto tr_stalled;
|
|
|
|
DPRINTFN(9, "UR_CLEAR_PORT_FEATURE on port %d\n", index);
|
|
|
|
switch (value) {
|
|
case UHF_PORT_SUSPEND:
|
|
dwc_otg_wakeup_peer(sc);
|
|
break;
|
|
|
|
case UHF_PORT_ENABLE:
|
|
if (sc->sc_flags.status_device_mode == 0) {
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT,
|
|
sc->sc_hprt_val | HPRT_PRTENA);
|
|
}
|
|
sc->sc_flags.port_enabled = 0;
|
|
break;
|
|
|
|
case UHF_C_PORT_RESET:
|
|
sc->sc_flags.change_reset = 0;
|
|
break;
|
|
|
|
case UHF_C_PORT_ENABLE:
|
|
sc->sc_flags.change_enabled = 0;
|
|
break;
|
|
|
|
case UHF_C_PORT_OVER_CURRENT:
|
|
sc->sc_flags.change_over_current = 0;
|
|
break;
|
|
|
|
case UHF_PORT_TEST:
|
|
case UHF_PORT_INDICATOR:
|
|
/* nops */
|
|
break;
|
|
|
|
case UHF_PORT_POWER:
|
|
sc->sc_flags.port_powered = 0;
|
|
if (sc->sc_mode == DWC_MODE_HOST || sc->sc_mode == DWC_MODE_OTG) {
|
|
sc->sc_hprt_val = 0;
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, HPRT_PRTENA);
|
|
}
|
|
dwc_otg_pull_down(sc);
|
|
dwc_otg_clocks_off(sc);
|
|
break;
|
|
|
|
case UHF_C_PORT_CONNECTION:
|
|
/* clear connect change flag */
|
|
sc->sc_flags.change_connect = 0;
|
|
break;
|
|
|
|
case UHF_C_PORT_SUSPEND:
|
|
sc->sc_flags.change_suspend = 0;
|
|
break;
|
|
|
|
default:
|
|
err = USB_ERR_IOERROR;
|
|
goto done;
|
|
}
|
|
goto tr_valid;
|
|
|
|
tr_handle_set_port_feature:
|
|
if (index != 1) {
|
|
goto tr_stalled;
|
|
}
|
|
DPRINTFN(9, "UR_SET_PORT_FEATURE\n");
|
|
|
|
switch (value) {
|
|
case UHF_PORT_ENABLE:
|
|
break;
|
|
|
|
case UHF_PORT_SUSPEND:
|
|
if (sc->sc_flags.status_device_mode == 0) {
|
|
/* set suspend BIT */
|
|
sc->sc_hprt_val |= HPRT_PRTSUSP;
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, sc->sc_hprt_val);
|
|
|
|
/* generate HUB suspend event */
|
|
dwc_otg_suspend_irq(sc);
|
|
}
|
|
break;
|
|
|
|
case UHF_PORT_RESET:
|
|
if (sc->sc_flags.status_device_mode == 0) {
|
|
|
|
DPRINTF("PORT RESET\n");
|
|
|
|
/* enable PORT reset */
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, sc->sc_hprt_val | HPRT_PRTRST);
|
|
|
|
/* Wait 62.5ms for reset to complete */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 16);
|
|
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, sc->sc_hprt_val);
|
|
|
|
/* Wait 62.5ms for reset to complete */
|
|
usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 16);
|
|
|
|
/* reset FIFOs */
|
|
dwc_otg_init_fifo(sc, DWC_MODE_HOST);
|
|
|
|
sc->sc_flags.change_reset = 1;
|
|
} else {
|
|
err = USB_ERR_IOERROR;
|
|
}
|
|
break;
|
|
|
|
case UHF_PORT_TEST:
|
|
case UHF_PORT_INDICATOR:
|
|
/* nops */
|
|
break;
|
|
case UHF_PORT_POWER:
|
|
if (sc->sc_mode == DWC_MODE_HOST || sc->sc_mode == DWC_MODE_OTG) {
|
|
sc->sc_hprt_val |= HPRT_PRTPWR;
|
|
DWC_OTG_WRITE_4(sc, DOTG_HPRT, sc->sc_hprt_val);
|
|
}
|
|
sc->sc_flags.port_powered = 1;
|
|
break;
|
|
default:
|
|
err = USB_ERR_IOERROR;
|
|
goto done;
|
|
}
|
|
goto tr_valid;
|
|
|
|
tr_handle_get_port_status:
|
|
|
|
DPRINTFN(9, "UR_GET_PORT_STATUS\n");
|
|
|
|
if (index != 1)
|
|
goto tr_stalled;
|
|
|
|
if (sc->sc_flags.status_vbus)
|
|
dwc_otg_clocks_on(sc);
|
|
else
|
|
dwc_otg_clocks_off(sc);
|
|
|
|
/* Select Device Side Mode */
|
|
|
|
if (sc->sc_flags.status_device_mode) {
|
|
value = UPS_PORT_MODE_DEVICE;
|
|
dwc_otg_timer_stop(sc);
|
|
} else {
|
|
value = 0;
|
|
dwc_otg_timer_start(sc);
|
|
}
|
|
|
|
if (sc->sc_flags.status_high_speed)
|
|
value |= UPS_HIGH_SPEED;
|
|
else if (sc->sc_flags.status_low_speed)
|
|
value |= UPS_LOW_SPEED;
|
|
|
|
if (sc->sc_flags.port_powered)
|
|
value |= UPS_PORT_POWER;
|
|
|
|
if (sc->sc_flags.port_enabled)
|
|
value |= UPS_PORT_ENABLED;
|
|
|
|
if (sc->sc_flags.port_over_current)
|
|
value |= UPS_OVERCURRENT_INDICATOR;
|
|
|
|
if (sc->sc_flags.status_vbus &&
|
|
sc->sc_flags.status_bus_reset)
|
|
value |= UPS_CURRENT_CONNECT_STATUS;
|
|
|
|
if (sc->sc_flags.status_suspend)
|
|
value |= UPS_SUSPEND;
|
|
|
|
USETW(sc->sc_hub_temp.ps.wPortStatus, value);
|
|
|
|
value = 0;
|
|
|
|
if (sc->sc_flags.change_connect)
|
|
value |= UPS_C_CONNECT_STATUS;
|
|
if (sc->sc_flags.change_suspend)
|
|
value |= UPS_C_SUSPEND;
|
|
if (sc->sc_flags.change_reset)
|
|
value |= UPS_C_PORT_RESET;
|
|
if (sc->sc_flags.change_over_current)
|
|
value |= UPS_C_OVERCURRENT_INDICATOR;
|
|
|
|
USETW(sc->sc_hub_temp.ps.wPortChange, value);
|
|
len = sizeof(sc->sc_hub_temp.ps);
|
|
goto tr_valid;
|
|
|
|
tr_handle_get_class_descriptor:
|
|
if (value & 0xFF) {
|
|
goto tr_stalled;
|
|
}
|
|
ptr = (const void *)&dwc_otg_hubd;
|
|
len = sizeof(dwc_otg_hubd);
|
|
goto tr_valid;
|
|
|
|
tr_stalled:
|
|
err = USB_ERR_STALLED;
|
|
tr_valid:
|
|
done:
|
|
*plength = len;
|
|
*pptr = ptr;
|
|
return (err);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_xfer_setup(struct usb_setup_params *parm)
|
|
{
|
|
struct usb_xfer *xfer;
|
|
void *last_obj;
|
|
uint32_t ntd;
|
|
uint32_t n;
|
|
uint8_t ep_no;
|
|
|
|
xfer = parm->curr_xfer;
|
|
|
|
/*
|
|
* NOTE: This driver does not use any of the parameters that
|
|
* are computed from the following values. Just set some
|
|
* reasonable dummies:
|
|
*/
|
|
parm->hc_max_packet_size = 0x500;
|
|
parm->hc_max_packet_count = 1;
|
|
parm->hc_max_frame_size = 0x500;
|
|
|
|
usbd_transfer_setup_sub(parm);
|
|
|
|
/*
|
|
* compute maximum number of TDs
|
|
*/
|
|
if ((xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) {
|
|
|
|
ntd = xfer->nframes + 1 /* STATUS */ + 1 /* SYNC 1 */
|
|
+ 1 /* SYNC 2 */ + 1 /* SYNC 3 */;
|
|
} else {
|
|
|
|
ntd = xfer->nframes + 1 /* SYNC */ ;
|
|
}
|
|
|
|
/*
|
|
* check if "usbd_transfer_setup_sub" set an error
|
|
*/
|
|
if (parm->err)
|
|
return;
|
|
|
|
/*
|
|
* allocate transfer descriptors
|
|
*/
|
|
last_obj = NULL;
|
|
|
|
ep_no = xfer->endpointno & UE_ADDR;
|
|
|
|
/*
|
|
* Check for a valid endpoint profile in USB device mode:
|
|
*/
|
|
if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
|
|
const struct usb_hw_ep_profile *pf;
|
|
|
|
dwc_otg_get_hw_ep_profile(parm->udev, &pf, ep_no);
|
|
|
|
if (pf == NULL) {
|
|
/* should not happen */
|
|
parm->err = USB_ERR_INVAL;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* align data */
|
|
parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
|
|
|
|
for (n = 0; n != ntd; n++) {
|
|
|
|
struct dwc_otg_td *td;
|
|
|
|
if (parm->buf) {
|
|
|
|
td = USB_ADD_BYTES(parm->buf, parm->size[0]);
|
|
|
|
/* init TD */
|
|
td->max_packet_size = xfer->max_packet_size;
|
|
td->ep_no = ep_no;
|
|
td->obj_next = last_obj;
|
|
|
|
last_obj = td;
|
|
}
|
|
parm->size[0] += sizeof(*td);
|
|
}
|
|
|
|
xfer->td_start[0] = last_obj;
|
|
}
|
|
|
|
static void
|
|
dwc_otg_xfer_unsetup(struct usb_xfer *xfer)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void
|
|
dwc_otg_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc,
|
|
struct usb_endpoint *ep)
|
|
{
|
|
struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(udev->bus);
|
|
|
|
DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d,%d)\n",
|
|
ep, udev->address,
|
|
edesc->bEndpointAddress, udev->flags.usb_mode,
|
|
sc->sc_rt_addr, udev->device_index);
|
|
|
|
if (udev->device_index != sc->sc_rt_addr) {
|
|
|
|
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
|
|
if (udev->speed != USB_SPEED_FULL &&
|
|
udev->speed != USB_SPEED_HIGH) {
|
|
/* not supported */
|
|
return;
|
|
}
|
|
} else {
|
|
uint16_t mps;
|
|
|
|
mps = UGETW(edesc->wMaxPacketSize);
|
|
|
|
/* Apply limitations of our USB host driver */
|
|
|
|
switch (udev->speed) {
|
|
case USB_SPEED_HIGH:
|
|
if (mps > 512) {
|
|
DPRINTF("wMaxPacketSize=0x%04x"
|
|
"is not supported\n", (int)mps);
|
|
/* not supported */
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case USB_SPEED_FULL:
|
|
case USB_SPEED_LOW:
|
|
if (mps > 188) {
|
|
DPRINTF("wMaxPacketSize=0x%04x"
|
|
"is not supported\n", (int)mps);
|
|
/* not supported */
|
|
return;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
DPRINTF("Invalid device speed\n");
|
|
/* not supported */
|
|
return;
|
|
}
|
|
}
|
|
|
|
if ((edesc->bmAttributes & UE_XFERTYPE) == UE_ISOCHRONOUS)
|
|
ep->methods = &dwc_otg_device_isoc_methods;
|
|
else
|
|
ep->methods = &dwc_otg_device_non_isoc_methods;
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_set_hw_power_sleep(struct usb_bus *bus, uint32_t state)
|
|
{
|
|
struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(bus);
|
|
|
|
switch (state) {
|
|
case USB_HW_POWER_SUSPEND:
|
|
dwc_otg_suspend(sc);
|
|
break;
|
|
case USB_HW_POWER_SHUTDOWN:
|
|
dwc_otg_uninit(sc);
|
|
break;
|
|
case USB_HW_POWER_RESUME:
|
|
dwc_otg_resume(sc);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
dwc_otg_get_dma_delay(struct usb_device *udev, uint32_t *pus)
|
|
{
|
|
/* DMA delay - wait until any use of memory is finished */
|
|
*pus = (2125); /* microseconds */
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_resume(struct usb_device *udev)
|
|
{
|
|
struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(udev->bus);
|
|
struct usb_xfer *xfer;
|
|
struct dwc_otg_td *td;
|
|
|
|
DPRINTF("\n");
|
|
|
|
/* Enable relevant Host channels before resuming */
|
|
|
|
USB_BUS_LOCK(udev->bus);
|
|
|
|
TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
|
|
|
|
if (xfer->xroot->udev == udev) {
|
|
|
|
td = xfer->td_transfer_cache;
|
|
if (td != NULL &&
|
|
td->channel < DWC_OTG_MAX_CHANNELS)
|
|
sc->sc_chan_state[td->channel].suspended = 0;
|
|
}
|
|
}
|
|
|
|
USB_BUS_UNLOCK(udev->bus);
|
|
|
|
/* poll all transfers again to restart resumed ones */
|
|
dwc_otg_do_poll(udev->bus);
|
|
}
|
|
|
|
static void
|
|
dwc_otg_device_suspend(struct usb_device *udev)
|
|
{
|
|
struct dwc_otg_softc *sc = DWC_OTG_BUS2SC(udev->bus);
|
|
struct usb_xfer *xfer;
|
|
struct dwc_otg_td *td;
|
|
|
|
DPRINTF("\n");
|
|
|
|
/* Disable relevant Host channels before going to suspend */
|
|
|
|
USB_BUS_LOCK(udev->bus);
|
|
|
|
TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) {
|
|
|
|
if (xfer->xroot->udev == udev) {
|
|
|
|
td = xfer->td_transfer_cache;
|
|
if (td != NULL &&
|
|
td->channel < DWC_OTG_MAX_CHANNELS)
|
|
sc->sc_chan_state[td->channel].suspended = 1;
|
|
}
|
|
}
|
|
|
|
USB_BUS_UNLOCK(udev->bus);
|
|
}
|
|
|
|
static const struct usb_bus_methods dwc_otg_bus_methods =
|
|
{
|
|
.endpoint_init = &dwc_otg_ep_init,
|
|
.xfer_setup = &dwc_otg_xfer_setup,
|
|
.xfer_unsetup = &dwc_otg_xfer_unsetup,
|
|
.get_hw_ep_profile = &dwc_otg_get_hw_ep_profile,
|
|
.xfer_stall = &dwc_otg_xfer_stall,
|
|
.set_stall = &dwc_otg_set_stall,
|
|
.clear_stall = &dwc_otg_clear_stall,
|
|
.roothub_exec = &dwc_otg_roothub_exec,
|
|
.xfer_poll = &dwc_otg_do_poll,
|
|
.device_state_change = &dwc_otg_device_state_change,
|
|
.set_hw_power_sleep = &dwc_otg_set_hw_power_sleep,
|
|
.get_dma_delay = &dwc_otg_get_dma_delay,
|
|
.device_resume = &dwc_otg_device_resume,
|
|
.device_suspend = &dwc_otg_device_suspend,
|
|
};
|