b7a0b99c31
PQ_FREE. There is little operational difference other then the kernel being a few kilobytes smaller and the code being more readable. * vm_page_select_free() has been *greatly* simplified. * The PQ_ZERO page queue and supporting structures have been removed * vm_page_zero_idle() revamped (see below) PG_ZERO setting and clearing has been migrated from vm_page_alloc() to vm_page_free[_zero]() and will eventually be guarenteed to remain tracked throughout a page's life ( if it isn't already ). When a page is freed, PG_ZERO pages are appended to the appropriate tailq in the PQ_FREE queue while non-PG_ZERO pages are prepended. When locating a new free page, PG_ZERO selection operates from within vm_page_list_find() ( get page from end of queue instead of beginning of queue ) and then only occurs in the nominal critical path case. If the nominal case misses, both normal and zero-page allocation devolves into the same _vm_page_list_find() select code without any specific zero-page optimizations. Additionally, vm_page_zero_idle() has been revamped. Hysteresis has been added and zero-page tracking adjusted to conform with the other changes. Currently hysteresis is set at 1/3 (lo) and 1/2 (hi) the number of free pages. We may wish to increase both parameters as time permits. The hysteresis is designed to avoid silly zeroing in borderline allocation/free situations.
1465 lines
38 KiB
C
1465 lines
38 KiB
C
/*
|
|
* Copyright (c) 1991 Regents of the University of California.
|
|
* All rights reserved.
|
|
* Copyright (c) 1994 John S. Dyson
|
|
* All rights reserved.
|
|
* Copyright (c) 1994 David Greenman
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* The Mach Operating System project at Carnegie-Mellon University.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the University of
|
|
* California, Berkeley and its contributors.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)vm_pageout.c 7.4 (Berkeley) 5/7/91
|
|
*
|
|
*
|
|
* Copyright (c) 1987, 1990 Carnegie-Mellon University.
|
|
* All rights reserved.
|
|
*
|
|
* Authors: Avadis Tevanian, Jr., Michael Wayne Young
|
|
*
|
|
* Permission to use, copy, modify and distribute this software and
|
|
* its documentation is hereby granted, provided that both the copyright
|
|
* notice and this permission notice appear in all copies of the
|
|
* software, derivative works or modified versions, and any portions
|
|
* thereof, and that both notices appear in supporting documentation.
|
|
*
|
|
* CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS"
|
|
* CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND
|
|
* FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE.
|
|
*
|
|
* Carnegie Mellon requests users of this software to return to
|
|
*
|
|
* Software Distribution Coordinator or Software.Distribution@CS.CMU.EDU
|
|
* School of Computer Science
|
|
* Carnegie Mellon University
|
|
* Pittsburgh PA 15213-3890
|
|
*
|
|
* any improvements or extensions that they make and grant Carnegie the
|
|
* rights to redistribute these changes.
|
|
*
|
|
* $Id: vm_pageout.c,v 1.135 1999/02/07 21:48:23 dillon Exp $
|
|
*/
|
|
|
|
/*
|
|
* The proverbial page-out daemon.
|
|
*/
|
|
|
|
#include "opt_vm.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/resourcevar.h>
|
|
#include <sys/signalvar.h>
|
|
#include <sys/vnode.h>
|
|
#include <sys/vmmeter.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_param.h>
|
|
#include <vm/vm_prot.h>
|
|
#include <sys/lock.h>
|
|
#include <vm/vm_object.h>
|
|
#include <vm/vm_page.h>
|
|
#include <vm/vm_map.h>
|
|
#include <vm/vm_pageout.h>
|
|
#include <vm/vm_pager.h>
|
|
#include <vm/swap_pager.h>
|
|
#include <vm/vm_extern.h>
|
|
|
|
/*
|
|
* System initialization
|
|
*/
|
|
|
|
/* the kernel process "vm_pageout"*/
|
|
static void vm_pageout __P((void));
|
|
static int vm_pageout_clean __P((vm_page_t));
|
|
static int vm_pageout_scan __P((void));
|
|
static int vm_pageout_free_page_calc __P((vm_size_t count));
|
|
struct proc *pageproc;
|
|
|
|
static struct kproc_desc page_kp = {
|
|
"pagedaemon",
|
|
vm_pageout,
|
|
&pageproc
|
|
};
|
|
SYSINIT_KT(pagedaemon, SI_SUB_KTHREAD_PAGE, SI_ORDER_FIRST, kproc_start, &page_kp)
|
|
|
|
#if !defined(NO_SWAPPING)
|
|
/* the kernel process "vm_daemon"*/
|
|
static void vm_daemon __P((void));
|
|
static struct proc *vmproc;
|
|
|
|
static struct kproc_desc vm_kp = {
|
|
"vmdaemon",
|
|
vm_daemon,
|
|
&vmproc
|
|
};
|
|
SYSINIT_KT(vmdaemon, SI_SUB_KTHREAD_VM, SI_ORDER_FIRST, kproc_start, &vm_kp)
|
|
#endif
|
|
|
|
|
|
int vm_pages_needed=0; /* Event on which pageout daemon sleeps */
|
|
int vm_pageout_deficit=0; /* Estimated number of pages deficit */
|
|
int vm_pageout_pages_needed=0; /* flag saying that the pageout daemon needs pages */
|
|
|
|
extern int npendingio;
|
|
#if !defined(NO_SWAPPING)
|
|
static int vm_pageout_req_swapout; /* XXX */
|
|
static int vm_daemon_needed;
|
|
#endif
|
|
extern int nswiodone;
|
|
extern int vm_swap_size;
|
|
extern int vfs_update_wakeup;
|
|
static int vm_pageout_stats_max=0, vm_pageout_stats_interval = 0;
|
|
static int vm_pageout_full_stats_interval = 0;
|
|
static int vm_pageout_stats_free_max=0, vm_pageout_algorithm_lru=0;
|
|
static int defer_swap_pageouts=0;
|
|
static int disable_swap_pageouts=0;
|
|
|
|
static int max_page_launder=100;
|
|
#if defined(NO_SWAPPING)
|
|
static int vm_swap_enabled=0;
|
|
static int vm_swap_idle_enabled=0;
|
|
#else
|
|
static int vm_swap_enabled=1;
|
|
static int vm_swap_idle_enabled=0;
|
|
#endif
|
|
|
|
SYSCTL_INT(_vm, VM_PAGEOUT_ALGORITHM, pageout_algorithm,
|
|
CTLFLAG_RW, &vm_pageout_algorithm_lru, 0, "LRU page mgmt");
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_stats_max,
|
|
CTLFLAG_RW, &vm_pageout_stats_max, 0, "Max pageout stats scan length");
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_full_stats_interval,
|
|
CTLFLAG_RW, &vm_pageout_full_stats_interval, 0, "Interval for full stats scan");
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_stats_interval,
|
|
CTLFLAG_RW, &vm_pageout_stats_interval, 0, "Interval for partial stats scan");
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, pageout_stats_free_max,
|
|
CTLFLAG_RW, &vm_pageout_stats_free_max, 0, "Not implemented");
|
|
|
|
#if defined(NO_SWAPPING)
|
|
SYSCTL_INT(_vm, VM_SWAPPING_ENABLED, swap_enabled,
|
|
CTLFLAG_RD, &vm_swap_enabled, 0, "");
|
|
SYSCTL_INT(_vm, OID_AUTO, swap_idle_enabled,
|
|
CTLFLAG_RD, &vm_swap_idle_enabled, 0, "");
|
|
#else
|
|
SYSCTL_INT(_vm, VM_SWAPPING_ENABLED, swap_enabled,
|
|
CTLFLAG_RW, &vm_swap_enabled, 0, "Enable entire process swapout");
|
|
SYSCTL_INT(_vm, OID_AUTO, swap_idle_enabled,
|
|
CTLFLAG_RW, &vm_swap_idle_enabled, 0, "Allow swapout on idle criteria");
|
|
#endif
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, defer_swapspace_pageouts,
|
|
CTLFLAG_RW, &defer_swap_pageouts, 0, "Give preference to dirty pages in mem");
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, disable_swapspace_pageouts,
|
|
CTLFLAG_RW, &disable_swap_pageouts, 0, "Disallow swapout of dirty pages");
|
|
|
|
SYSCTL_INT(_vm, OID_AUTO, max_page_launder,
|
|
CTLFLAG_RW, &max_page_launder, 0, "Maximum number of pages to clean per pass");
|
|
|
|
|
|
#define VM_PAGEOUT_PAGE_COUNT 16
|
|
int vm_pageout_page_count = VM_PAGEOUT_PAGE_COUNT;
|
|
|
|
int vm_page_max_wired; /* XXX max # of wired pages system-wide */
|
|
|
|
#if !defined(NO_SWAPPING)
|
|
typedef void freeer_fcn_t __P((vm_map_t, vm_object_t, vm_pindex_t, int));
|
|
static void vm_pageout_map_deactivate_pages __P((vm_map_t, vm_pindex_t));
|
|
static freeer_fcn_t vm_pageout_object_deactivate_pages;
|
|
static void vm_req_vmdaemon __P((void));
|
|
#endif
|
|
static void vm_pageout_page_stats(void);
|
|
void pmap_collect(void);
|
|
|
|
/*
|
|
* vm_pageout_clean:
|
|
*
|
|
* Clean the page and remove it from the laundry.
|
|
*
|
|
* We set the busy bit to cause potential page faults on this page to
|
|
* block. Note the careful timing, however, the busy bit isn't set till
|
|
* late and we cannot do anything that will mess with the page.
|
|
*/
|
|
|
|
static int
|
|
vm_pageout_clean(m)
|
|
vm_page_t m;
|
|
{
|
|
register vm_object_t object;
|
|
vm_page_t mc[2*vm_pageout_page_count];
|
|
int pageout_count;
|
|
int i, forward_okay, backward_okay, page_base;
|
|
vm_pindex_t pindex = m->pindex;
|
|
|
|
object = m->object;
|
|
|
|
/*
|
|
* It doesn't cost us anything to pageout OBJT_DEFAULT or OBJT_SWAP
|
|
* with the new swapper, but we could have serious problems paging
|
|
* out other object types if there is insufficient memory.
|
|
*
|
|
* Unfortunately, checking free memory here is far too late, so the
|
|
* check has been moved up a procedural level.
|
|
*/
|
|
|
|
#if 0
|
|
/*
|
|
* If not OBJT_SWAP, additional memory may be needed to do the pageout.
|
|
* Try to avoid the deadlock.
|
|
*/
|
|
if ((object->type == OBJT_DEFAULT) &&
|
|
((cnt.v_free_count + cnt.v_cache_count) < cnt.v_pageout_free_min))
|
|
return 0;
|
|
#endif
|
|
|
|
/*
|
|
* Don't mess with the page if it's busy.
|
|
*/
|
|
if ((m->hold_count != 0) ||
|
|
((m->busy != 0) || (m->flags & PG_BUSY)))
|
|
return 0;
|
|
|
|
#if 0
|
|
/*
|
|
* XXX REMOVED XXX. vm_object_collapse() can block, which can
|
|
* change the page state. Calling vm_object_collapse() might also
|
|
* destroy or rename the page because we have not busied it yet!!!
|
|
* So this code segment is removed.
|
|
*/
|
|
/*
|
|
* Try collapsing before it's too late. XXX huh? Why are we doing
|
|
* this here?
|
|
*/
|
|
if (object->backing_object) {
|
|
vm_object_collapse(object);
|
|
}
|
|
#endif
|
|
|
|
mc[vm_pageout_page_count] = m;
|
|
pageout_count = 1;
|
|
page_base = vm_pageout_page_count;
|
|
forward_okay = TRUE;
|
|
if (pindex != 0)
|
|
backward_okay = TRUE;
|
|
else
|
|
backward_okay = FALSE;
|
|
/*
|
|
* Scan object for clusterable pages.
|
|
*
|
|
* We can cluster ONLY if: ->> the page is NOT
|
|
* clean, wired, busy, held, or mapped into a
|
|
* buffer, and one of the following:
|
|
* 1) The page is inactive, or a seldom used
|
|
* active page.
|
|
* -or-
|
|
* 2) we force the issue.
|
|
*/
|
|
for (i = 1; (i < vm_pageout_page_count) && (forward_okay || backward_okay); i++) {
|
|
vm_page_t p;
|
|
|
|
/*
|
|
* See if forward page is clusterable.
|
|
*/
|
|
if (forward_okay) {
|
|
/*
|
|
* Stop forward scan at end of object.
|
|
*/
|
|
if ((pindex + i) > object->size) {
|
|
forward_okay = FALSE;
|
|
goto do_backward;
|
|
}
|
|
p = vm_page_lookup(object, pindex + i);
|
|
if (p) {
|
|
if (((p->queue - p->pc) == PQ_CACHE) ||
|
|
(p->flags & PG_BUSY) || p->busy) {
|
|
forward_okay = FALSE;
|
|
goto do_backward;
|
|
}
|
|
vm_page_test_dirty(p);
|
|
if ((p->dirty & p->valid) != 0 &&
|
|
(p->queue == PQ_INACTIVE) &&
|
|
(p->wire_count == 0) &&
|
|
(p->hold_count == 0)) {
|
|
mc[vm_pageout_page_count + i] = p;
|
|
pageout_count++;
|
|
if (pageout_count == vm_pageout_page_count)
|
|
break;
|
|
} else {
|
|
forward_okay = FALSE;
|
|
}
|
|
} else {
|
|
forward_okay = FALSE;
|
|
}
|
|
}
|
|
do_backward:
|
|
/*
|
|
* See if backward page is clusterable.
|
|
*/
|
|
if (backward_okay) {
|
|
/*
|
|
* Stop backward scan at beginning of object.
|
|
*/
|
|
if ((pindex - i) == 0) {
|
|
backward_okay = FALSE;
|
|
}
|
|
p = vm_page_lookup(object, pindex - i);
|
|
if (p) {
|
|
if (((p->queue - p->pc) == PQ_CACHE) ||
|
|
(p->flags & PG_BUSY) || p->busy) {
|
|
backward_okay = FALSE;
|
|
continue;
|
|
}
|
|
vm_page_test_dirty(p);
|
|
if ((p->dirty & p->valid) != 0 &&
|
|
(p->queue == PQ_INACTIVE) &&
|
|
(p->wire_count == 0) &&
|
|
(p->hold_count == 0)) {
|
|
mc[vm_pageout_page_count - i] = p;
|
|
pageout_count++;
|
|
page_base--;
|
|
if (pageout_count == vm_pageout_page_count)
|
|
break;
|
|
} else {
|
|
backward_okay = FALSE;
|
|
}
|
|
} else {
|
|
backward_okay = FALSE;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* we allow reads during pageouts...
|
|
*/
|
|
return vm_pageout_flush(&mc[page_base], pageout_count, 0);
|
|
}
|
|
|
|
/*
|
|
* vm_pageout_flush() - launder the given pages
|
|
*
|
|
* The given pages are laundered. Note that we setup for the start of
|
|
* I/O ( i.e. busy the page ), mark it read-only, and bump the object
|
|
* reference count all in here rather then in the parent. If we want
|
|
* the parent to do more sophisticated things we may have to change
|
|
* the ordering.
|
|
*/
|
|
|
|
int
|
|
vm_pageout_flush(mc, count, flags)
|
|
vm_page_t *mc;
|
|
int count;
|
|
int flags;
|
|
{
|
|
register vm_object_t object;
|
|
int pageout_status[count];
|
|
int numpagedout = 0;
|
|
int i;
|
|
|
|
/*
|
|
* Initiate I/O. Bump the vm_page_t->busy counter and
|
|
* mark the pages read-only.
|
|
*
|
|
* We do not have to fixup the clean/dirty bits here... we can
|
|
* allow the pager to do it after the I/O completes.
|
|
*/
|
|
|
|
for (i = 0; i < count; i++) {
|
|
vm_page_io_start(mc[i]);
|
|
vm_page_protect(mc[i], VM_PROT_READ);
|
|
}
|
|
|
|
object = mc[0]->object;
|
|
vm_object_pip_add(object, count);
|
|
|
|
vm_pager_put_pages(object, mc, count,
|
|
(flags | ((object == kernel_object) ? OBJPC_SYNC : 0)),
|
|
pageout_status);
|
|
|
|
for (i = 0; i < count; i++) {
|
|
vm_page_t mt = mc[i];
|
|
|
|
switch (pageout_status[i]) {
|
|
case VM_PAGER_OK:
|
|
numpagedout++;
|
|
break;
|
|
case VM_PAGER_PEND:
|
|
numpagedout++;
|
|
break;
|
|
case VM_PAGER_BAD:
|
|
/*
|
|
* Page outside of range of object. Right now we
|
|
* essentially lose the changes by pretending it
|
|
* worked.
|
|
*/
|
|
pmap_clear_modify(VM_PAGE_TO_PHYS(mt));
|
|
mt->dirty = 0;
|
|
break;
|
|
case VM_PAGER_ERROR:
|
|
case VM_PAGER_FAIL:
|
|
/*
|
|
* If page couldn't be paged out, then reactivate the
|
|
* page so it doesn't clog the inactive list. (We
|
|
* will try paging out it again later).
|
|
*/
|
|
vm_page_activate(mt);
|
|
break;
|
|
case VM_PAGER_AGAIN:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If the operation is still going, leave the page busy to
|
|
* block all other accesses. Also, leave the paging in
|
|
* progress indicator set so that we don't attempt an object
|
|
* collapse.
|
|
*/
|
|
if (pageout_status[i] != VM_PAGER_PEND) {
|
|
vm_object_pip_wakeup(object);
|
|
vm_page_io_finish(mt);
|
|
}
|
|
}
|
|
return numpagedout;
|
|
}
|
|
|
|
#if !defined(NO_SWAPPING)
|
|
/*
|
|
* vm_pageout_object_deactivate_pages
|
|
*
|
|
* deactivate enough pages to satisfy the inactive target
|
|
* requirements or if vm_page_proc_limit is set, then
|
|
* deactivate all of the pages in the object and its
|
|
* backing_objects.
|
|
*
|
|
* The object and map must be locked.
|
|
*/
|
|
static void
|
|
vm_pageout_object_deactivate_pages(map, object, desired, map_remove_only)
|
|
vm_map_t map;
|
|
vm_object_t object;
|
|
vm_pindex_t desired;
|
|
int map_remove_only;
|
|
{
|
|
register vm_page_t p, next;
|
|
int rcount;
|
|
int remove_mode;
|
|
int s;
|
|
|
|
if (object->type == OBJT_DEVICE)
|
|
return;
|
|
|
|
while (object) {
|
|
if (vm_map_pmap(map)->pm_stats.resident_count <= desired)
|
|
return;
|
|
if (object->paging_in_progress)
|
|
return;
|
|
|
|
remove_mode = map_remove_only;
|
|
if (object->shadow_count > 1)
|
|
remove_mode = 1;
|
|
/*
|
|
* scan the objects entire memory queue
|
|
*/
|
|
rcount = object->resident_page_count;
|
|
p = TAILQ_FIRST(&object->memq);
|
|
while (p && (rcount-- > 0)) {
|
|
int actcount;
|
|
if (vm_map_pmap(map)->pm_stats.resident_count <= desired)
|
|
return;
|
|
next = TAILQ_NEXT(p, listq);
|
|
cnt.v_pdpages++;
|
|
if (p->wire_count != 0 ||
|
|
p->hold_count != 0 ||
|
|
p->busy != 0 ||
|
|
(p->flags & PG_BUSY) ||
|
|
!pmap_page_exists(vm_map_pmap(map), VM_PAGE_TO_PHYS(p))) {
|
|
p = next;
|
|
continue;
|
|
}
|
|
|
|
actcount = pmap_ts_referenced(VM_PAGE_TO_PHYS(p));
|
|
if (actcount) {
|
|
vm_page_flag_set(p, PG_REFERENCED);
|
|
} else if (p->flags & PG_REFERENCED) {
|
|
actcount = 1;
|
|
}
|
|
|
|
if ((p->queue != PQ_ACTIVE) &&
|
|
(p->flags & PG_REFERENCED)) {
|
|
vm_page_activate(p);
|
|
p->act_count += actcount;
|
|
vm_page_flag_clear(p, PG_REFERENCED);
|
|
} else if (p->queue == PQ_ACTIVE) {
|
|
if ((p->flags & PG_REFERENCED) == 0) {
|
|
p->act_count -= min(p->act_count, ACT_DECLINE);
|
|
if (!remove_mode && (vm_pageout_algorithm_lru || (p->act_count == 0))) {
|
|
vm_page_protect(p, VM_PROT_NONE);
|
|
vm_page_deactivate(p);
|
|
} else {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, p, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, p, pageq);
|
|
splx(s);
|
|
}
|
|
} else {
|
|
vm_page_activate(p);
|
|
vm_page_flag_clear(p, PG_REFERENCED);
|
|
if (p->act_count < (ACT_MAX - ACT_ADVANCE))
|
|
p->act_count += ACT_ADVANCE;
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, p, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, p, pageq);
|
|
splx(s);
|
|
}
|
|
} else if (p->queue == PQ_INACTIVE) {
|
|
vm_page_protect(p, VM_PROT_NONE);
|
|
}
|
|
p = next;
|
|
}
|
|
object = object->backing_object;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* deactivate some number of pages in a map, try to do it fairly, but
|
|
* that is really hard to do.
|
|
*/
|
|
static void
|
|
vm_pageout_map_deactivate_pages(map, desired)
|
|
vm_map_t map;
|
|
vm_pindex_t desired;
|
|
{
|
|
vm_map_entry_t tmpe;
|
|
vm_object_t obj, bigobj;
|
|
|
|
if (lockmgr(&map->lock, LK_EXCLUSIVE | LK_NOWAIT, (void *)0, curproc)) {
|
|
return;
|
|
}
|
|
|
|
bigobj = NULL;
|
|
|
|
/*
|
|
* first, search out the biggest object, and try to free pages from
|
|
* that.
|
|
*/
|
|
tmpe = map->header.next;
|
|
while (tmpe != &map->header) {
|
|
if ((tmpe->eflags & MAP_ENTRY_IS_SUB_MAP) == 0) {
|
|
obj = tmpe->object.vm_object;
|
|
if ((obj != NULL) && (obj->shadow_count <= 1) &&
|
|
((bigobj == NULL) ||
|
|
(bigobj->resident_page_count < obj->resident_page_count))) {
|
|
bigobj = obj;
|
|
}
|
|
}
|
|
tmpe = tmpe->next;
|
|
}
|
|
|
|
if (bigobj)
|
|
vm_pageout_object_deactivate_pages(map, bigobj, desired, 0);
|
|
|
|
/*
|
|
* Next, hunt around for other pages to deactivate. We actually
|
|
* do this search sort of wrong -- .text first is not the best idea.
|
|
*/
|
|
tmpe = map->header.next;
|
|
while (tmpe != &map->header) {
|
|
if (vm_map_pmap(map)->pm_stats.resident_count <= desired)
|
|
break;
|
|
if ((tmpe->eflags & MAP_ENTRY_IS_SUB_MAP) == 0) {
|
|
obj = tmpe->object.vm_object;
|
|
if (obj)
|
|
vm_pageout_object_deactivate_pages(map, obj, desired, 0);
|
|
}
|
|
tmpe = tmpe->next;
|
|
};
|
|
|
|
/*
|
|
* Remove all mappings if a process is swapped out, this will free page
|
|
* table pages.
|
|
*/
|
|
if (desired == 0)
|
|
pmap_remove(vm_map_pmap(map),
|
|
VM_MIN_ADDRESS, VM_MAXUSER_ADDRESS);
|
|
vm_map_unlock(map);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Don't try to be fancy - being fancy can lead to VOP_LOCK's and therefore
|
|
* to vnode deadlocks. We only do it for OBJT_DEFAULT and OBJT_SWAP objects
|
|
* which we know can be trivially freed.
|
|
*/
|
|
|
|
void
|
|
vm_pageout_page_free(vm_page_t m) {
|
|
vm_object_t object = m->object;
|
|
int type = object->type;
|
|
|
|
if (type == OBJT_SWAP || type == OBJT_DEFAULT)
|
|
vm_object_reference(object);
|
|
vm_page_busy(m);
|
|
vm_page_protect(m, VM_PROT_NONE);
|
|
vm_page_free(m);
|
|
if (type == OBJT_SWAP || type == OBJT_DEFAULT)
|
|
vm_object_deallocate(object);
|
|
}
|
|
|
|
/*
|
|
* vm_pageout_scan does the dirty work for the pageout daemon.
|
|
*/
|
|
static int
|
|
vm_pageout_scan()
|
|
{
|
|
vm_page_t m, next;
|
|
int page_shortage, maxscan, pcount;
|
|
int addl_page_shortage, addl_page_shortage_init;
|
|
int maxlaunder;
|
|
int launder_loop = 0;
|
|
struct proc *p, *bigproc;
|
|
vm_offset_t size, bigsize;
|
|
vm_object_t object;
|
|
int force_wakeup = 0;
|
|
int actcount;
|
|
int vnodes_skipped = 0;
|
|
int s;
|
|
|
|
/*
|
|
* Do whatever cleanup that the pmap code can.
|
|
*/
|
|
pmap_collect();
|
|
|
|
addl_page_shortage_init = vm_pageout_deficit;
|
|
vm_pageout_deficit = 0;
|
|
|
|
if (max_page_launder == 0)
|
|
max_page_launder = 1;
|
|
|
|
/*
|
|
* Calculate the number of pages we want to either free or move
|
|
* to the cache.
|
|
*/
|
|
|
|
page_shortage = (cnt.v_free_target + cnt.v_cache_min) -
|
|
(cnt.v_free_count + cnt.v_cache_count);
|
|
page_shortage += addl_page_shortage_init;
|
|
|
|
/*
|
|
* Figure out what to do with dirty pages when they are encountered.
|
|
* Assume that 1/3 of the pages on the inactive list are clean. If
|
|
* we think we can reach our target, disable laundering (do not
|
|
* clean any dirty pages). If we miss the target we will loop back
|
|
* up and do a laundering run.
|
|
*/
|
|
|
|
if (cnt.v_inactive_count / 3 > page_shortage) {
|
|
maxlaunder = 0;
|
|
launder_loop = 0;
|
|
} else {
|
|
maxlaunder =
|
|
(cnt.v_inactive_target > max_page_launder) ?
|
|
max_page_launder : cnt.v_inactive_target;
|
|
launder_loop = 1;
|
|
}
|
|
|
|
/*
|
|
* Start scanning the inactive queue for pages we can move to the
|
|
* cache or free. The scan will stop when the target is reached or
|
|
* we have scanned the entire inactive queue.
|
|
*/
|
|
|
|
rescan0:
|
|
addl_page_shortage = addl_page_shortage_init;
|
|
maxscan = cnt.v_inactive_count;
|
|
for (
|
|
m = TAILQ_FIRST(&vm_page_queue_inactive);
|
|
m != NULL && maxscan-- > 0 && page_shortage > 0;
|
|
m = next
|
|
) {
|
|
|
|
cnt.v_pdpages++;
|
|
|
|
if (m->queue != PQ_INACTIVE) {
|
|
goto rescan0;
|
|
}
|
|
|
|
next = TAILQ_NEXT(m, pageq);
|
|
|
|
if (m->hold_count) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
|
splx(s);
|
|
addl_page_shortage++;
|
|
continue;
|
|
}
|
|
/*
|
|
* Dont mess with busy pages, keep in the front of the
|
|
* queue, most likely are being paged out.
|
|
*/
|
|
if (m->busy || (m->flags & PG_BUSY)) {
|
|
addl_page_shortage++;
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If the object is not being used, we ignore previous
|
|
* references.
|
|
*/
|
|
if (m->object->ref_count == 0) {
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
|
pmap_clear_reference(VM_PAGE_TO_PHYS(m));
|
|
|
|
/*
|
|
* Otherwise, if the page has been referenced while in the
|
|
* inactive queue, we bump the "activation count" upwards,
|
|
* making it less likely that the page will be added back to
|
|
* the inactive queue prematurely again. Here we check the
|
|
* page tables (or emulated bits, if any), given the upper
|
|
* level VM system not knowing anything about existing
|
|
* references.
|
|
*/
|
|
} else if (((m->flags & PG_REFERENCED) == 0) &&
|
|
(actcount = pmap_ts_referenced(VM_PAGE_TO_PHYS(m)))) {
|
|
vm_page_activate(m);
|
|
m->act_count += (actcount + ACT_ADVANCE);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If the upper level VM system knows about any page
|
|
* references, we activate the page. We also set the
|
|
* "activation count" higher than normal so that we will less
|
|
* likely place pages back onto the inactive queue again.
|
|
*/
|
|
if ((m->flags & PG_REFERENCED) != 0) {
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
|
actcount = pmap_ts_referenced(VM_PAGE_TO_PHYS(m));
|
|
vm_page_activate(m);
|
|
m->act_count += (actcount + ACT_ADVANCE + 1);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If the upper level VM system doesn't know anything about
|
|
* the page being dirty, we have to check for it again. As
|
|
* far as the VM code knows, any partially dirty pages are
|
|
* fully dirty.
|
|
*/
|
|
if (m->dirty == 0) {
|
|
vm_page_test_dirty(m);
|
|
} else {
|
|
vm_page_dirty(m);
|
|
}
|
|
|
|
/*
|
|
* Invalid pages can be easily freed
|
|
*/
|
|
if (m->valid == 0) {
|
|
vm_pageout_page_free(m);
|
|
cnt.v_dfree++;
|
|
--page_shortage;
|
|
|
|
/*
|
|
* Clean pages can be placed onto the cache queue.
|
|
*/
|
|
} else if (m->dirty == 0) {
|
|
vm_page_cache(m);
|
|
--page_shortage;
|
|
|
|
/*
|
|
* Dirty pages need to be paged out. Note that we clean
|
|
* only a limited number of pages per pagedaemon pass.
|
|
*/
|
|
} else if (maxlaunder > 0) {
|
|
int written;
|
|
int swap_pageouts_ok;
|
|
struct vnode *vp = NULL;
|
|
|
|
object = m->object;
|
|
|
|
if ((object->type != OBJT_SWAP) && (object->type != OBJT_DEFAULT)) {
|
|
swap_pageouts_ok = 1;
|
|
} else {
|
|
swap_pageouts_ok = !(defer_swap_pageouts || disable_swap_pageouts);
|
|
swap_pageouts_ok |= (!disable_swap_pageouts && defer_swap_pageouts &&
|
|
(cnt.v_free_count + cnt.v_cache_count) < cnt.v_free_min);
|
|
|
|
}
|
|
|
|
/*
|
|
* We don't bother paging objects that are "dead".
|
|
* Those objects are in a "rundown" state.
|
|
*/
|
|
if (!swap_pageouts_ok || (object->flags & OBJ_DEAD)) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
|
splx(s);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* For now we protect against potential memory
|
|
* deadlocks by requiring significant memory to be
|
|
* free if the object is not OBJT_DEFAULT or OBJT_SWAP.
|
|
* We do not 'trust' any other object type to operate
|
|
* with low memory, not even OBJT_DEVICE. The VM
|
|
* allocator will special case allocations done by
|
|
* the pageout daemon so the check below actually
|
|
* does have some hysteresis in it. It isn't the best
|
|
* solution, though.
|
|
*/
|
|
|
|
if (
|
|
object->type != OBJT_DEFAULT &&
|
|
object->type != OBJT_SWAP &&
|
|
cnt.v_free_count < cnt.v_free_reserved
|
|
) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
|
splx(s);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Presumably we have sufficient free memory to do
|
|
* the more sophisticated checks and locking required
|
|
* for vnodes.
|
|
*
|
|
* The object is already known NOT to be dead. The
|
|
* vget() may still block, though, because
|
|
* VOP_ISLOCKED() doesn't check to see if an inode
|
|
* (v_data) is associated with the vnode. If it isn't,
|
|
* vget() will load in it from disk. Worse, vget()
|
|
* may actually get stuck waiting on "inode" if another
|
|
* process is in the process of bringing the inode in.
|
|
* This is bad news for us either way.
|
|
*
|
|
* So for the moment we check v_data == NULL as a
|
|
* workaround. This means that vnodes which do not
|
|
* use v_data in the way we expect probably will not
|
|
* wind up being paged out by the pager and it will be
|
|
* up to the syncer to get them. That's better then
|
|
* us blocking here.
|
|
*
|
|
* This whole code section is bogus - we need to fix
|
|
* the vnode pager to handle vm_page_t's without us
|
|
* having to do any sophisticated VOP tests.
|
|
*/
|
|
|
|
if (object->type == OBJT_VNODE) {
|
|
vp = object->handle;
|
|
|
|
if (VOP_ISLOCKED(vp) ||
|
|
vp->v_data == NULL ||
|
|
vget(vp, LK_EXCLUSIVE|LK_NOOBJ, curproc)) {
|
|
if ((m->queue == PQ_INACTIVE) &&
|
|
(m->hold_count == 0) &&
|
|
(m->busy == 0) &&
|
|
(m->flags & PG_BUSY) == 0) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
|
splx(s);
|
|
}
|
|
if (object->flags & OBJ_MIGHTBEDIRTY)
|
|
vnodes_skipped++;
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* The page might have been moved to another queue
|
|
* during potential blocking in vget() above.
|
|
*/
|
|
if (m->queue != PQ_INACTIVE) {
|
|
if (object->flags & OBJ_MIGHTBEDIRTY)
|
|
vnodes_skipped++;
|
|
vput(vp);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* The page may have been busied during the blocking in
|
|
* vput(); We don't move the page back onto the end of
|
|
* the queue so that statistics are more correct if we don't.
|
|
*/
|
|
if (m->busy || (m->flags & PG_BUSY)) {
|
|
vput(vp);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* If the page has become held, then skip it
|
|
*/
|
|
if (m->hold_count) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_inactive, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_inactive, m, pageq);
|
|
splx(s);
|
|
if (object->flags & OBJ_MIGHTBEDIRTY)
|
|
vnodes_skipped++;
|
|
vput(vp);
|
|
continue;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If a page is dirty, then it is either being washed
|
|
* (but not yet cleaned) or it is still in the
|
|
* laundry. If it is still in the laundry, then we
|
|
* start the cleaning operation.
|
|
*/
|
|
written = vm_pageout_clean(m);
|
|
if (vp)
|
|
vput(vp);
|
|
|
|
maxlaunder -= written;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we still have a page shortage and we didn't launder anything,
|
|
* run the inactive scan again and launder something this time.
|
|
*/
|
|
|
|
if (launder_loop == 0 && page_shortage > 0) {
|
|
launder_loop = 1;
|
|
maxlaunder =
|
|
(cnt.v_inactive_target > max_page_launder) ?
|
|
max_page_launder : cnt.v_inactive_target;
|
|
goto rescan0;
|
|
}
|
|
|
|
/*
|
|
* Compute the page shortage from the point of view of having to
|
|
* move pages from the active queue to the inactive queue.
|
|
*/
|
|
|
|
page_shortage = (cnt.v_inactive_target + cnt.v_cache_min) -
|
|
(cnt.v_free_count + cnt.v_inactive_count + cnt.v_cache_count);
|
|
page_shortage += addl_page_shortage;
|
|
|
|
/*
|
|
* Scan the active queue for things we can deactivate
|
|
*/
|
|
|
|
pcount = cnt.v_active_count;
|
|
m = TAILQ_FIRST(&vm_page_queue_active);
|
|
|
|
while ((m != NULL) && (pcount-- > 0) && (page_shortage > 0)) {
|
|
|
|
/*
|
|
* This is a consistancy check, and should likely be a panic
|
|
* or warning.
|
|
*/
|
|
if (m->queue != PQ_ACTIVE) {
|
|
break;
|
|
}
|
|
|
|
next = TAILQ_NEXT(m, pageq);
|
|
/*
|
|
* Don't deactivate pages that are busy.
|
|
*/
|
|
if ((m->busy != 0) ||
|
|
(m->flags & PG_BUSY) ||
|
|
(m->hold_count != 0)) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
splx(s);
|
|
m = next;
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* The count for pagedaemon pages is done after checking the
|
|
* page for eligbility...
|
|
*/
|
|
cnt.v_pdpages++;
|
|
|
|
/*
|
|
* Check to see "how much" the page has been used.
|
|
*/
|
|
actcount = 0;
|
|
if (m->object->ref_count != 0) {
|
|
if (m->flags & PG_REFERENCED) {
|
|
actcount += 1;
|
|
}
|
|
actcount += pmap_ts_referenced(VM_PAGE_TO_PHYS(m));
|
|
if (actcount) {
|
|
m->act_count += ACT_ADVANCE + actcount;
|
|
if (m->act_count > ACT_MAX)
|
|
m->act_count = ACT_MAX;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Since we have "tested" this bit, we need to clear it now.
|
|
*/
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
|
|
|
/*
|
|
* Only if an object is currently being used, do we use the
|
|
* page activation count stats.
|
|
*/
|
|
if (actcount && (m->object->ref_count != 0)) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
splx(s);
|
|
} else {
|
|
m->act_count -= min(m->act_count, ACT_DECLINE);
|
|
if (vm_pageout_algorithm_lru ||
|
|
(m->object->ref_count == 0) || (m->act_count == 0)) {
|
|
page_shortage--;
|
|
if (m->object->ref_count == 0) {
|
|
vm_page_protect(m, VM_PROT_NONE);
|
|
if (m->dirty == 0)
|
|
vm_page_cache(m);
|
|
else
|
|
vm_page_deactivate(m);
|
|
} else {
|
|
vm_page_deactivate(m);
|
|
}
|
|
} else {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
splx(s);
|
|
}
|
|
}
|
|
m = next;
|
|
}
|
|
|
|
s = splvm();
|
|
|
|
/*
|
|
* We try to maintain some *really* free pages, this allows interrupt
|
|
* code to be guaranteed space. Since both cache and free queues
|
|
* are considered basically 'free', moving pages from cache to free
|
|
* does not effect other calculations.
|
|
*/
|
|
|
|
while (cnt.v_free_count < cnt.v_free_reserved) {
|
|
static int cache_rover = 0;
|
|
m = vm_page_list_find(PQ_CACHE, cache_rover, FALSE);
|
|
if (!m)
|
|
break;
|
|
if ((m->flags & PG_BUSY) || m->busy || m->hold_count || m->wire_count) {
|
|
#ifdef INVARIANTS
|
|
printf("Warning: busy page %p found in cache\n", m);
|
|
#endif
|
|
vm_page_deactivate(m);
|
|
continue;
|
|
}
|
|
cache_rover = (cache_rover + PQ_PRIME2) & PQ_L2_MASK;
|
|
vm_pageout_page_free(m);
|
|
cnt.v_dfree++;
|
|
}
|
|
splx(s);
|
|
|
|
#if !defined(NO_SWAPPING)
|
|
/*
|
|
* Idle process swapout -- run once per second.
|
|
*/
|
|
if (vm_swap_idle_enabled) {
|
|
static long lsec;
|
|
if (time_second != lsec) {
|
|
vm_pageout_req_swapout |= VM_SWAP_IDLE;
|
|
vm_req_vmdaemon();
|
|
lsec = time_second;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* If we didn't get enough free pages, and we have skipped a vnode
|
|
* in a writeable object, wakeup the sync daemon. And kick swapout
|
|
* if we did not get enough free pages.
|
|
*/
|
|
if ((cnt.v_cache_count + cnt.v_free_count) <
|
|
(cnt.v_free_target + cnt.v_cache_min) ) {
|
|
if (vnodes_skipped &&
|
|
(cnt.v_cache_count + cnt.v_free_count) < cnt.v_free_min) {
|
|
if (!vfs_update_wakeup) {
|
|
vfs_update_wakeup = 1;
|
|
wakeup(&vfs_update_wakeup);
|
|
}
|
|
}
|
|
#if !defined(NO_SWAPPING)
|
|
if (vm_swap_enabled &&
|
|
(cnt.v_free_count + cnt.v_cache_count < cnt.v_free_target)) {
|
|
vm_req_vmdaemon();
|
|
vm_pageout_req_swapout |= VM_SWAP_NORMAL;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* make sure that we have swap space -- if we are low on memory and
|
|
* swap -- then kill the biggest process.
|
|
*/
|
|
if ((vm_swap_size == 0 || swap_pager_full) &&
|
|
((cnt.v_free_count + cnt.v_cache_count) < cnt.v_free_min)) {
|
|
bigproc = NULL;
|
|
bigsize = 0;
|
|
for (p = allproc.lh_first; p != 0; p = p->p_list.le_next) {
|
|
/*
|
|
* if this is a system process, skip it
|
|
*/
|
|
if ((p->p_flag & P_SYSTEM) || (p->p_pid == 1) ||
|
|
((p->p_pid < 48) && (vm_swap_size != 0))) {
|
|
continue;
|
|
}
|
|
/*
|
|
* if the process is in a non-running type state,
|
|
* don't touch it.
|
|
*/
|
|
if (p->p_stat != SRUN && p->p_stat != SSLEEP) {
|
|
continue;
|
|
}
|
|
/*
|
|
* get the process size
|
|
*/
|
|
size = p->p_vmspace->vm_pmap.pm_stats.resident_count;
|
|
/*
|
|
* if the this process is bigger than the biggest one
|
|
* remember it.
|
|
*/
|
|
if (size > bigsize) {
|
|
bigproc = p;
|
|
bigsize = size;
|
|
}
|
|
}
|
|
if (bigproc != NULL) {
|
|
killproc(bigproc, "out of swap space");
|
|
bigproc->p_estcpu = 0;
|
|
bigproc->p_nice = PRIO_MIN;
|
|
resetpriority(bigproc);
|
|
wakeup(&cnt.v_free_count);
|
|
}
|
|
}
|
|
return force_wakeup;
|
|
}
|
|
|
|
/*
|
|
* This routine tries to maintain the pseudo LRU active queue,
|
|
* so that during long periods of time where there is no paging,
|
|
* that some statistic accumlation still occurs. This code
|
|
* helps the situation where paging just starts to occur.
|
|
*/
|
|
static void
|
|
vm_pageout_page_stats()
|
|
{
|
|
int s;
|
|
vm_page_t m,next;
|
|
int pcount,tpcount; /* Number of pages to check */
|
|
static int fullintervalcount = 0;
|
|
int page_shortage;
|
|
|
|
page_shortage = (cnt.v_inactive_target + cnt.v_cache_max + cnt.v_free_min) -
|
|
(cnt.v_free_count + cnt.v_inactive_count + cnt.v_cache_count);
|
|
if (page_shortage <= 0)
|
|
return;
|
|
|
|
pcount = cnt.v_active_count;
|
|
fullintervalcount += vm_pageout_stats_interval;
|
|
if (fullintervalcount < vm_pageout_full_stats_interval) {
|
|
tpcount = (vm_pageout_stats_max * cnt.v_active_count) / cnt.v_page_count;
|
|
if (pcount > tpcount)
|
|
pcount = tpcount;
|
|
}
|
|
|
|
m = TAILQ_FIRST(&vm_page_queue_active);
|
|
while ((m != NULL) && (pcount-- > 0)) {
|
|
int actcount;
|
|
|
|
if (m->queue != PQ_ACTIVE) {
|
|
break;
|
|
}
|
|
|
|
next = TAILQ_NEXT(m, pageq);
|
|
/*
|
|
* Don't deactivate pages that are busy.
|
|
*/
|
|
if ((m->busy != 0) ||
|
|
(m->flags & PG_BUSY) ||
|
|
(m->hold_count != 0)) {
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
splx(s);
|
|
m = next;
|
|
continue;
|
|
}
|
|
|
|
actcount = 0;
|
|
if (m->flags & PG_REFERENCED) {
|
|
vm_page_flag_clear(m, PG_REFERENCED);
|
|
actcount += 1;
|
|
}
|
|
|
|
actcount += pmap_ts_referenced(VM_PAGE_TO_PHYS(m));
|
|
if (actcount) {
|
|
m->act_count += ACT_ADVANCE + actcount;
|
|
if (m->act_count > ACT_MAX)
|
|
m->act_count = ACT_MAX;
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
splx(s);
|
|
} else {
|
|
if (m->act_count == 0) {
|
|
/*
|
|
* We turn off page access, so that we have more accurate
|
|
* RSS stats. We don't do this in the normal page deactivation
|
|
* when the system is loaded VM wise, because the cost of
|
|
* the large number of page protect operations would be higher
|
|
* than the value of doing the operation.
|
|
*/
|
|
vm_page_protect(m, VM_PROT_NONE);
|
|
vm_page_deactivate(m);
|
|
} else {
|
|
m->act_count -= min(m->act_count, ACT_DECLINE);
|
|
s = splvm();
|
|
TAILQ_REMOVE(&vm_page_queue_active, m, pageq);
|
|
TAILQ_INSERT_TAIL(&vm_page_queue_active, m, pageq);
|
|
splx(s);
|
|
}
|
|
}
|
|
|
|
m = next;
|
|
}
|
|
}
|
|
|
|
static int
|
|
vm_pageout_free_page_calc(count)
|
|
vm_size_t count;
|
|
{
|
|
if (count < cnt.v_page_count)
|
|
return 0;
|
|
/*
|
|
* free_reserved needs to include enough for the largest swap pager
|
|
* structures plus enough for any pv_entry structs when paging.
|
|
*/
|
|
if (cnt.v_page_count > 1024)
|
|
cnt.v_free_min = 4 + (cnt.v_page_count - 1024) / 200;
|
|
else
|
|
cnt.v_free_min = 4;
|
|
cnt.v_pageout_free_min = (2*MAXBSIZE)/PAGE_SIZE +
|
|
cnt.v_interrupt_free_min;
|
|
cnt.v_free_reserved = vm_pageout_page_count +
|
|
cnt.v_pageout_free_min + (count / 768) + PQ_L2_SIZE;
|
|
cnt.v_free_min += cnt.v_free_reserved;
|
|
return 1;
|
|
}
|
|
|
|
|
|
/*
|
|
* vm_pageout is the high level pageout daemon.
|
|
*/
|
|
static void
|
|
vm_pageout()
|
|
{
|
|
/*
|
|
* Initialize some paging parameters.
|
|
*/
|
|
|
|
cnt.v_interrupt_free_min = 2;
|
|
if (cnt.v_page_count < 2000)
|
|
vm_pageout_page_count = 8;
|
|
|
|
vm_pageout_free_page_calc(cnt.v_page_count);
|
|
/*
|
|
* free_reserved needs to include enough for the largest swap pager
|
|
* structures plus enough for any pv_entry structs when paging.
|
|
*/
|
|
if (cnt.v_free_count > 6144)
|
|
cnt.v_free_target = 3 * cnt.v_free_min + cnt.v_free_reserved;
|
|
else
|
|
cnt.v_free_target = 2 * cnt.v_free_min + cnt.v_free_reserved;
|
|
|
|
if (cnt.v_free_count > 2048) {
|
|
cnt.v_cache_min = cnt.v_free_target;
|
|
cnt.v_cache_max = 2 * cnt.v_cache_min;
|
|
cnt.v_inactive_target = (3 * cnt.v_free_target) / 2;
|
|
} else {
|
|
cnt.v_cache_min = 0;
|
|
cnt.v_cache_max = 0;
|
|
cnt.v_inactive_target = cnt.v_free_count / 4;
|
|
}
|
|
if (cnt.v_inactive_target > cnt.v_free_count / 3)
|
|
cnt.v_inactive_target = cnt.v_free_count / 3;
|
|
|
|
/* XXX does not really belong here */
|
|
if (vm_page_max_wired == 0)
|
|
vm_page_max_wired = cnt.v_free_count / 3;
|
|
|
|
if (vm_pageout_stats_max == 0)
|
|
vm_pageout_stats_max = cnt.v_free_target;
|
|
|
|
/*
|
|
* Set interval in seconds for stats scan.
|
|
*/
|
|
if (vm_pageout_stats_interval == 0)
|
|
vm_pageout_stats_interval = 5;
|
|
if (vm_pageout_full_stats_interval == 0)
|
|
vm_pageout_full_stats_interval = vm_pageout_stats_interval * 4;
|
|
|
|
|
|
/*
|
|
* Set maximum free per pass
|
|
*/
|
|
if (vm_pageout_stats_free_max == 0)
|
|
vm_pageout_stats_free_max = 5;
|
|
|
|
max_page_launder = (cnt.v_page_count > 1800 ? 32 : 16);
|
|
|
|
swap_pager_swap_init();
|
|
/*
|
|
* The pageout daemon is never done, so loop forever.
|
|
*/
|
|
while (TRUE) {
|
|
int error;
|
|
int s = splvm();
|
|
if (!vm_pages_needed ||
|
|
((cnt.v_free_count + cnt.v_cache_count) > cnt.v_free_min)) {
|
|
vm_pages_needed = 0;
|
|
error = tsleep(&vm_pages_needed,
|
|
PVM, "psleep", vm_pageout_stats_interval * hz);
|
|
if (error && !vm_pages_needed) {
|
|
splx(s);
|
|
vm_pageout_page_stats();
|
|
continue;
|
|
}
|
|
} else if (vm_pages_needed) {
|
|
vm_pages_needed = 0;
|
|
tsleep(&vm_pages_needed, PVM, "psleep", hz/2);
|
|
}
|
|
|
|
if (vm_pages_needed)
|
|
cnt.v_pdwakeups++;
|
|
vm_pages_needed = 0;
|
|
splx(s);
|
|
vm_pageout_scan();
|
|
vm_pageout_deficit = 0;
|
|
wakeup(&cnt.v_free_count);
|
|
}
|
|
}
|
|
|
|
void
|
|
pagedaemon_wakeup()
|
|
{
|
|
if (!vm_pages_needed && curproc != pageproc) {
|
|
vm_pages_needed++;
|
|
wakeup(&vm_pages_needed);
|
|
}
|
|
}
|
|
|
|
#if !defined(NO_SWAPPING)
|
|
static void
|
|
vm_req_vmdaemon()
|
|
{
|
|
static int lastrun = 0;
|
|
|
|
if ((ticks > (lastrun + hz)) || (ticks < lastrun)) {
|
|
wakeup(&vm_daemon_needed);
|
|
lastrun = ticks;
|
|
}
|
|
}
|
|
|
|
static void
|
|
vm_daemon()
|
|
{
|
|
struct proc *p;
|
|
|
|
while (TRUE) {
|
|
tsleep(&vm_daemon_needed, PPAUSE, "psleep", 0);
|
|
if (vm_pageout_req_swapout) {
|
|
swapout_procs(vm_pageout_req_swapout);
|
|
vm_pageout_req_swapout = 0;
|
|
}
|
|
/*
|
|
* scan the processes for exceeding their rlimits or if
|
|
* process is swapped out -- deactivate pages
|
|
*/
|
|
|
|
for (p = allproc.lh_first; p != 0; p = p->p_list.le_next) {
|
|
quad_t limit;
|
|
vm_offset_t size;
|
|
|
|
/*
|
|
* if this is a system process or if we have already
|
|
* looked at this process, skip it.
|
|
*/
|
|
if (p->p_flag & (P_SYSTEM | P_WEXIT)) {
|
|
continue;
|
|
}
|
|
/*
|
|
* if the process is in a non-running type state,
|
|
* don't touch it.
|
|
*/
|
|
if (p->p_stat != SRUN && p->p_stat != SSLEEP) {
|
|
continue;
|
|
}
|
|
/*
|
|
* get a limit
|
|
*/
|
|
limit = qmin(p->p_rlimit[RLIMIT_RSS].rlim_cur,
|
|
p->p_rlimit[RLIMIT_RSS].rlim_max);
|
|
|
|
/*
|
|
* let processes that are swapped out really be
|
|
* swapped out set the limit to nothing (will force a
|
|
* swap-out.)
|
|
*/
|
|
if ((p->p_flag & P_INMEM) == 0)
|
|
limit = 0; /* XXX */
|
|
|
|
size = p->p_vmspace->vm_pmap.pm_stats.resident_count * PAGE_SIZE;
|
|
if (limit >= 0 && size >= limit) {
|
|
vm_pageout_map_deactivate_pages(&p->p_vmspace->vm_map,
|
|
(vm_pindex_t)(limit >> PAGE_SHIFT) );
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#endif
|