jhb a548ed3c67 Support soft power-off via the ACPI S5 state for bhyve guests. ... - Implement the PM1_EVT and PM1_CTL registers required by ACPI. The PM1_EVT register is mostly a dummy as bhyve doesn't support any of the hardware-initiated events. The only bit of PM1_CNT that is implemented are the sleep request bits (SPL_EN and SLP_TYP) which request a graceful power off for S5. In particular, for S5, bhyve exits with a non-zero value which terminates the loop in vmrun.sh. - Emulate the Reset Control register at I/O port 0xcf9 and advertise it as the reset register via ACPI. - Advertise an _S5 package. - Extend the in/out interface to allow an in/out handler to request that the hypervisor trigger a reset or power-off. - While here, note that all vCPUs in a guest support C1 ("hlt"). Reviewed by: neel (earlier version)		2013-12-24 16:14:19 +00:00
..
acpi.c	Support soft power-off via the ACPI S5 state for bhyve guests.	2013-12-24 16:14:19 +00:00
acpi.h	Make the virtual ioapic available unconditionally in a bhyve virtual machine.	2013-10-31 05:44:45 +00:00
ahci.h
atpic.c
bhyve.8	mdoc: nuke whitespace.	2013-12-23 15:00:15 +00:00
bhyverun.c	Support soft power-off via the ACPI S5 state for bhyve guests.	2013-12-24 16:14:19 +00:00
bhyverun.h
block_if.c	Add the VM name to the process name with setproctitle().	2013-11-06 00:25:17 +00:00
block_if.h
consport.c
dbgport.c
dbgport.h
elcr.c
inout.c	Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached	2013-10-29 00:18:11 +00:00
inout.h	Support soft power-off via the ACPI S5 state for bhyve guests.	2013-12-24 16:14:19 +00:00
legacy_irq.c	Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached	2013-10-29 00:18:11 +00:00
legacy_irq.h	Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached	2013-10-29 00:18:11 +00:00
Makefile	Support soft power-off via the ACPI S5 state for bhyve guests.	2013-12-24 16:14:19 +00:00
mem.c
mem.h
mevent_test.c
mevent.c	Add the VM name to the process name with setproctitle().	2013-11-06 00:25:17 +00:00
mevent.h
mptbl.c	Extend the support for local interrupts on the local APIC:	2013-12-23 19:29:07 +00:00
mptbl.h	Make the virtual ioapic available unconditionally in a bhyve virtual machine.	2013-10-31 05:44:45 +00:00
pci_ahci.c	The Data Byte Count (DBC) field of a Physical Region Descriptor	2013-11-26 03:00:54 +00:00
pci_emul.c	Add an API to deliver message signalled interrupts to vcpus. This allows	2013-12-16 19:59:31 +00:00
pci_emul.h	Add an API to deliver message signalled interrupts to vcpus. This allows	2013-12-16 19:59:31 +00:00
pci_hostbridge.c
pci_lpc.c	Add an ioctl to assert and deassert an ioapic pin atomically. This will be used	2013-11-23 03:56:03 +00:00
pci_lpc.h	Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached	2013-10-29 00:18:11 +00:00
pci_passthru.c	Rename the ambiguously named 'vm_setup_msi()' and 'vm_setup_msix()' to	2013-12-18 03:58:51 +00:00
pci_uart.c	Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached	2013-10-29 00:18:11 +00:00
pci_virtio_block.c
pci_virtio_net.c	Add the VM name to the process name with setproctitle().	2013-11-06 00:25:17 +00:00
pit_8254.c	Add an ioctl to assert and deassert an ioapic pin atomically. This will be used	2013-11-23 03:56:03 +00:00
pit_8254.h
pm.c	Support soft power-off via the ACPI S5 state for bhyve guests.	2013-12-24 16:14:19 +00:00
pmtmr.c
post.c
rtc.c
rtc.h
spinup_ap.c
spinup_ap.h
uart_emul.c	Allow bhyve and bhyveload to attach to tty devices.	2013-11-27 00:21:37 +00:00
uart_emul.h	Add support for PCI-to-ISA LPC bridge emulation. If the LPC bus is attached	2013-10-29 00:18:11 +00:00
virtio.c
virtio.h
xmsr.c	Add an option to ignore accesses by the guest to unimplemented MSRs.	2013-12-19 22:27:28 +00:00
xmsr.h	Add an option to ignore accesses by the guest to unimplemented MSRs.	2013-12-19 22:27:28 +00:00