| .. |
|
at91_aicreg.h
|
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.
|
2010-07-14 00:48:53 +00:00 |
|
at91_cfata.c
|
Eliminate devclass_find_free_unit call here, since -1 gives the same
|
2009-06-10 17:39:19 +00:00 |
|
at91_machdep.c
|
Merging projects/armv6, part 1
|
2012-08-15 03:03:03 +00:00 |
|
at91_mci.c
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91_mcireg.h
|
- Add support for MCI1 revision 2xx controllers and a work-around for their
|
2012-04-22 00:43:32 +00:00 |
|
at91_pdcreg.h
|
|
|
|
at91_pio_sam9g20.h
|
Add support for the AT91SAM9260
|
2010-10-06 22:40:27 +00:00 |
|
at91_pio_sam9g45.h
|
Add support for the Atmel AT91SAM9G45 CPU.
|
2012-07-26 08:01:25 +00:00 |
|
at91_pio.c
|
Throw this debug behind bootverbose. The information isn't all that
|
2012-06-16 04:34:46 +00:00 |
|
at91_pioreg.h
|
Hack to unbreak boot2 for at91rm9200 boot loader. When the at91sam
|
2012-05-11 14:40:25 +00:00 |
|
at91_piovar.h
|
- Try to bring these files closer to style(9).
|
2012-04-14 11:29:32 +00:00 |
|
at91_pit.c
|
at91pit->at91_pit for consistnecy with other drivers.
|
2012-07-11 17:11:54 +00:00 |
|
at91_pitreg.h
|
at91pit->at91_pit for consistnecy with other drivers.
|
2012-07-11 17:11:54 +00:00 |
|
at91_pmc.c
|
Make some at91_pcm_xxx() functions NULL safe.
|
2012-08-21 19:55:24 +00:00 |
|
at91_pmcreg.h
|
Add charge pump current register.
|
2012-08-10 04:47:20 +00:00 |
|
at91_pmcvar.h
|
Correct the PLLA setting functions and centralize.
|
2012-08-11 05:45:19 +00:00 |
|
at91_reset.S
|
Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way
|
2012-07-10 02:14:50 +00:00 |
|
at91_rst.c
|
at91$DEV->at91_$DEV to match other Atmel drivers. Also, export
|
2012-07-11 17:11:07 +00:00 |
|
at91_rstreg.h
|
at91$DEV->at91_$DEV to match other Atmel drivers. Also, export
|
2012-07-11 17:11:07 +00:00 |
|
at91_rtc.c
|
Remove pointless semicolons after label
|
2011-09-30 04:55:23 +00:00 |
|
at91_rtcreg.h
|
|
|
|
at91_spi.c
|
Allow chip selects other than 0. The SAM9260EK board
|
2012-07-31 19:14:22 +00:00 |
|
at91_spireg.h
|
- Prepend the device description with "AT91" to reflect its nature. [1]
|
2012-06-03 00:54:10 +00:00 |
|
at91_ssc.c
|
Strip trailing whitespace before other changes.
|
2012-06-13 04:52:19 +00:00 |
|
at91_sscreg.h
|
|
|
|
at91_st.c
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91_streg.h
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91_twi.c
|
Fix a stray debug that I committed accidentally years ago...
|
2012-06-22 06:44:22 +00:00 |
|
at91_twiio.h
|
|
|
|
at91_twireg.h
|
Add support for the Atmel SAM9XE familiy of microcontrollers, which
|
2012-04-14 17:09:38 +00:00 |
|
at91_usartreg.h
|
|
|
|
at91_wdt.c
|
Add support for the Atmel SAM9XE familiy of microcontrollers, which
|
2012-04-14 17:09:38 +00:00 |
|
at91_wdtreg.h
|
Strip trailing whitespace before other changes.
|
2012-06-13 04:52:19 +00:00 |
|
at91.c
|
Move unmask IRQ function call up to nexus device level.
|
2012-07-17 03:18:12 +00:00 |
|
at91board.h
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
at91reg.h
|
The system IRQ is always IRQ 1. Make it so.
|
2012-07-10 02:39:03 +00:00 |
|
at91rm92reg.h
|
Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way
|
2012-07-10 02:14:50 +00:00 |
|
at91rm9200_devices.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
at91rm9200.c
|
Complete the transition away from newbus to populate the children to
|
2012-07-12 13:45:58 +00:00 |
|
at91rm9200var.h
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
at91sam9g20.c
|
Correct the PLLA setting functions and centralize.
|
2012-08-11 05:45:19 +00:00 |
|
at91sam9g20reg.h
|
Eliminate the AT91XXXX_BASE for each SoC. AT91_BASE is the right way
|
2012-07-10 02:14:50 +00:00 |
|
at91sam9g45.c
|
Correct the PLLA setting functions and centralize.
|
2012-08-11 05:45:19 +00:00 |
|
at91sam9g45reg.h
|
Add support for the Atmel AT91SAM9G45 CPU.
|
2012-07-26 08:01:25 +00:00 |
|
at91sam9x5.c
|
Correct the PLLA setting functions and centralize.
|
2012-08-11 05:45:19 +00:00 |
|
at91sam9x5reg.h
|
These files will support the whole at91sam9x5 family when done,
|
2012-07-30 21:30:43 +00:00 |
|
at91sam9260.c
|
Update comments about setting PLLA and refernce the tables in the
|
2012-08-11 05:12:46 +00:00 |
|
at91sam9260reg.h
|
Missed one of the special AT91SAM9xxx_BASE defines. This should be
|
2012-07-10 02:44:15 +00:00 |
|
at91soc.c
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91soc.h
|
Make the SoC stuff a little more modular, and start to move away from
|
2012-07-11 20:17:14 +00:00 |
|
at91var.h
|
Remember where we found the DBGU and use that for our console.
|
2012-07-12 19:11:37 +00:00 |
|
board_bwct.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
board_eb9200.c
|
Preliminary Embest ATEB9200 support.
|
2012-08-16 05:03:59 +00:00 |
|
board_ethernut5.c
|
uboot should be telling us it is an ETHERNUT5 for this board. Tag it
|
2012-07-14 06:00:37 +00:00 |
|
board_hl200.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
board_hl201.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_kb920x.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
board_qila9g20.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_sam9g20ek.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_sam9x25ek.c
|
Create a generic way to support multiple boards within an
|
2012-07-07 05:02:39 +00:00 |
|
board_sam9260ek.c
|
Turns out the ETHERNUT5 isn't anything like the SAM9260-EK. Make this
|
2012-07-27 05:33:55 +00:00 |
|
board_sn9g45.c
|
Add new at91sam9g45 support and sn9g45 board to the ATMEL kernel.
|
2012-07-27 16:38:02 +00:00 |
|
board_tsc4370.c
|
Configure the peripheral pins for MCI devices. Eliminate the now-unused
|
2012-07-15 05:41:43 +00:00 |
|
files.at91
|
Preliminary Embest ATEB9200 support.
|
2012-08-16 05:03:59 +00:00 |
|
if_ate.c
|
Fix a couple of comments about the rm9200, and fix a couple of indentation
|
2012-07-30 06:00:31 +00:00 |
|
if_atereg.h
|
if_ate.c:
|
2010-10-06 22:25:21 +00:00 |
|
if_macb.c
|
Strip trailing whitespace before other changes.
|
2012-06-13 04:52:19 +00:00 |
|
if_macbreg.h
|
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.
|
2010-07-14 00:48:53 +00:00 |
|
if_macbvar.h
|
Import preliminary support for Atmel AT91SAM9G20 cpu, and the Hot-e HL201.
|
2010-07-14 00:48:53 +00:00 |
|
std.at91
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.at91sam9
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.at91sam9g45
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.atmel
|
Set machine correctly on ARM. This allows universe to use the correct world
|
2012-08-18 05:48:19 +00:00 |
|
std.bwct
|
|
|
|
std.eb9200
|
Preliminary Embest ATEB9200 support.
|
2012-08-16 05:03:59 +00:00 |
|
std.ethernut5
|
Opt-in rather than opt-out of the SoC. We don't really support
|
2012-07-01 06:34:17 +00:00 |
|
std.hl200
|
Compute the master clock frequency, so we no longer need to have it
|
2012-05-29 03:23:18 +00:00 |
|
std.hl201
|
Opt-in rather than opt-out of the SoC. We don't really support
|
2012-07-01 06:34:17 +00:00 |
|
std.kb920x
|
Compute the master clock frequency, so we no longer need to have it
|
2012-05-29 03:23:18 +00:00 |
|
std.qila9g20
|
Opt-in rather than opt-out of the SoC. We don't really support
|
2012-07-01 06:34:17 +00:00 |
|
std.sam9g20ek
|
Opt-in rather than opt-out of the SoC. We don't really support
|
2012-07-01 06:34:17 +00:00 |
|
std.sam9x25ek
|
These files will support the whole at91sam9x5 family when done,
|
2012-07-30 21:30:43 +00:00 |
|
std.sam9260ek
|
Add preliminary support for Atmel SAM9260-EK evaluation kit.
|
2012-07-14 06:13:23 +00:00 |
|
std.sn9g45
|
Add support for the DesignA Electronics Snapper9g45 System on Module.
|
2012-07-26 08:05:28 +00:00 |
|
std.tsc4370
|
|
|
|
uart_bus_at91usart.c
|
Some models have 6 USARTS + DBGU. Set a consistent name.
|
2012-07-26 05:46:56 +00:00 |
|
uart_cpu_at91usart.c
|
This file is no longer AT91RM9200 specific, but now is generic to all
|
2012-07-12 19:15:38 +00:00 |
|
uart_dev_at91usart.c
|
- Add missing locking in at91_usart_getc().
|
2012-05-01 20:42:03 +00:00 |
