Marius Strobl 2f9f08b635 - Take advantage of mii_phy_add_media() for adding media and setting ...

sc->mii_anegticks according to whether the respective BGE chip
  supports Fast Ethernet only or also Gigabit Ethernet.
- At least the BGE chips I've tested with wedge when isolating them
  so document this as the reason for setting MIIF_NOISOLATE and
  remove the unused (and partially even #ifdef'ed out) isolation
  related code. Add code that panics if we encounter a non-zero MII
  instance as generally there's no way a PHY requiring MIIF_NOISOLATE
  can be handled gracefully in a multi-PHY configuration (it's ok for
  the internal PHY of single-PHY-only-NIC to not support isolation
  though).
- Additionally set MIIF_NOLOOP as loopback doesn't seem to work
  either and remove the #ifdef'ed out code for adding respective
  media. The MIIF_NOLOOP flag currently triggers nothing but
  hopefully will be respected by mii_phy_setmedia() later on.

Reviewed by:	jkim, yongari
MFC after:	1 month

2007-04-30 22:35:33 +00:00

..

acphy.c

Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL

2007-01-12 22:59:38 +00:00

acphyreg.h

- Correct the AC_MCTL_BYP_PCS constant.

2007-01-12 22:58:04 +00:00

amphy.c

Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table

2007-01-12 22:27:46 +00:00

amphyreg.h

…

bmtphy.c

Add a helper function mii_phy_dev_probe(), which wraps around the

2006-12-02 15:32:34 +00:00

bmtphyreg.h

…

brgphy.c

- Take advantage of mii_phy_add_media() for adding media and setting

2007-04-30 22:35:33 +00:00

brgphyreg.h

Fix typos in comments while I am here.

2007-02-13 00:34:32 +00:00

ciphy.c

Some style changes to a couple of PHY drivers:

2006-12-02 19:36:25 +00:00

ciphyreg.h

…

e1000phy.c

o Add support code for newer Marvell PHYs.

2006-12-11 11:09:48 +00:00

e1000phyreg.h

Add additional Marvell PHY registers.

2006-12-11 10:43:32 +00:00

exphy.c

- Take advantage of mii_phy_dev_probe().

2007-01-12 23:17:43 +00:00

gentbi.c

Add missing MIIBUS_MEDIAINIT() call.

2007-01-26 17:06:02 +00:00

inphy.c

Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table

2007-01-12 22:27:46 +00:00

inphyreg.h

…

ip1000phy.c

Add a helper function mii_phy_dev_probe(), which wraps around the

2006-12-02 15:32:34 +00:00

ip1000phyreg.h

Add ip1000 PHY driver for IC Plus IP1000A integrated PHY.

2006-07-25 00:16:09 +00:00

lxtphy.c

Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table

2007-01-12 22:27:46 +00:00

lxtphyreg.h

…

mii_physubr.c

Remove mii_media_from_bmcr(); all previous users have been converted to

2007-01-13 00:14:45 +00:00

mii.c

- In miibus_attach() remove IFM_IMASK from the dontcare_mask of the

2007-01-20 00:55:03 +00:00

mii.h

…

miibus_if.m

…

miidevs

Let brgphy(4) attach for the Broadcom BCM5755 ASIC based chipsets

2007-04-10 20:43:23 +00:00

miivar.h

Remove mii_media_from_bmcr(); all previous users have been converted to

2007-01-13 00:14:45 +00:00

mlphy.c

Some style changes to a couple of PHY drivers:

2006-12-02 19:36:25 +00:00

nsgphy.c

Add a helper function mii_phy_dev_probe(), which wraps around the

2006-12-02 15:32:34 +00:00

nsgphyreg.h

…

nsphy.c

Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table

2007-01-12 22:27:46 +00:00

nsphyreg.h

…

pnaphy.c

Add a helper function mii_phy_dev_probe(), which wraps around the

2006-12-02 15:32:34 +00:00

qsphy.c

Add a helper function mii_phy_dev_probe(), which wraps around the

2006-12-02 15:32:34 +00:00

qsphyreg.h

…

rgephy.c

Correct the previous change:

2006-12-18 02:14:26 +00:00

rgephyreg.h

…

rlphy.c

mii_phy_dev_probe returns its third argument on match, not 0, so pass 0

2007-02-26 04:48:24 +00:00

rlswitch.c

MFp4: add basic driver for RTL8305SC switch in PHY emulation

2007-01-05 01:46:26 +00:00

ruephy.c

- Take advantage of mii_phy_dev_probe() and mii_phy_setmedia().

2007-01-13 00:06:41 +00:00

ruephyreg.h

…

tdkphy.c

- Don't set MIIF_NOISOLATE so tdkphy(4) can be used in configurations

2006-12-02 20:16:45 +00:00

tdkphyreg.h

…

tlphy.c

Some style changes to a couple of PHY drivers:

2006-12-02 19:36:25 +00:00

tlphyreg.h

…

ukphy_subr.c

If the PHY has 1000BASE-T capability, check to see if a 1000BASE-T speed

2006-05-19 03:51:42 +00:00

ukphy.c

- Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with

2007-01-20 00:52:29 +00:00

xmphy.c

Some style changes to a couple of PHY drivers:

2006-12-02 19:36:25 +00:00

xmphyreg.h

…