e952166b53
The on-board NIC is an 3x3 AR9380 with 5GHz only. * enable pci code in AR9344_BASE * enable ath_pci and the firmware loading bits in DB120 * add in the relevant hints in DB120.hints to inform the probe/attach code where the PCIe fixup data is for the onboard chip. This is only relevant for a default development board. I also have a DB120 with the on-board PCIe wifi NIC disabled and it's exposed as a real PCIe slot (to put normal PCIe NICs in); the fixup code will need to be disabled to make this work correctly. Tested: * DB120
53 lines
1.1 KiB
Plaintext
53 lines
1.1 KiB
Plaintext
#
|
|
# DB120 - the AR9344 SoC reference design
|
|
#
|
|
# $FreeBSD$
|
|
#
|
|
|
|
# Include the default AR934x parameters
|
|
include "AR934X_BASE"
|
|
|
|
ident DB120
|
|
|
|
# Override hints with board values
|
|
hints "DB120.hints"
|
|
|
|
# Force the board memory - the base DB120 has 128MB RAM
|
|
options AR71XX_REALMEM=(128*1024*1024)
|
|
|
|
# i2c GPIO bus
|
|
#device gpioiic
|
|
#device iicbb
|
|
#device iicbus
|
|
#device iic
|
|
|
|
# Options required for miiproxy and mdiobus
|
|
options ARGE_MDIO # Export an MDIO bus separate from arge
|
|
device miiproxy # MDIO bus <-> MII PHY rendezvous
|
|
|
|
device etherswitch
|
|
device arswitch
|
|
|
|
# read MSDOS formatted disks - USB
|
|
#options MSDOSFS
|
|
|
|
# Enable the uboot environment stuff rather then the
|
|
# redboot stuff.
|
|
options AR71XX_ENV_UBOOT
|
|
|
|
# uzip - to boot natively from flash
|
|
device geom_uncompress
|
|
options GEOM_UNCOMPRESS
|
|
|
|
# Used for the static uboot partition map
|
|
device geom_map
|
|
|
|
# yes, this board has a PCI connected atheros device
|
|
device ath_pci
|
|
options AR71XX_ATH_EEPROM
|
|
device firmware # Used by the above
|
|
options ATH_EEPROM_FIRMWARE
|
|
|
|
# Boot off of the rootfs, as defined in the geom_map setup.
|
|
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
|