freebsd-skq/sys/dev/smartpqi/smartpqi_helper.c
2020-09-01 21:53:21 +00:00

311 lines
8.6 KiB
C

/*-
* Copyright (c) 2018 Microsemi Corporation.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#include "smartpqi_includes.h"
/*
* Function used to validate the adapter health.
*/
boolean_t pqisrc_ctrl_offline(pqisrc_softstate_t *softs)
{
DBG_FUNC("IN\n");
DBG_FUNC("OUT\n");
return !softs->ctrl_online;
}
/* Function used set/clear legacy INTx bit in Legacy Interrupt INTx
* mask clear pqi register
*/
void pqisrc_configure_legacy_intx(pqisrc_softstate_t *softs, boolean_t enable_intx)
{
uint32_t intx_mask;
uint32_t *reg_addr = NULL;
DBG_FUNC("IN\n");
if (enable_intx)
reg_addr = &softs->pqi_reg->legacy_intr_mask_clr;
else
reg_addr = &softs->pqi_reg->legacy_intr_mask_set;
intx_mask = PCI_MEM_GET32(softs, reg_addr, PQI_LEGACY_INTR_MASK_CLR);
intx_mask |= PQISRC_LEGACY_INTX_MASK;
PCI_MEM_PUT32(softs, reg_addr, PQI_LEGACY_INTR_MASK_CLR ,intx_mask);
DBG_FUNC("OUT\n");
}
/*
* Function used to take exposed devices to OS as offline.
*/
void pqisrc_take_devices_offline(pqisrc_softstate_t *softs)
{
pqi_scsi_dev_t *device = NULL;
int i,j;
DBG_FUNC("IN\n");
for(i = 0; i < PQI_MAX_DEVICES; i++) {
for(j = 0; j < PQI_MAX_MULTILUN; j++) {
if(softs->device_list[i][j] == NULL)
continue;
device = softs->device_list[i][j];
pqisrc_remove_device(softs, device);
}
}
DBG_FUNC("OUT\n");
}
/*
* Function used to take adapter offline.
*/
void pqisrc_take_ctrl_offline(pqisrc_softstate_t *softs)
{
DBG_FUNC("IN\n");
softs->ctrl_online = false;
pqisrc_trigger_nmi_sis(softs);
os_complete_outstanding_cmds_nodevice(softs);
pqisrc_take_devices_offline(softs);
DBG_FUNC("OUT\n");
}
/*
* Timer handler for the adapter heart-beat.
*/
void pqisrc_heartbeat_timer_handler(pqisrc_softstate_t *softs)
{
uint64_t num_intrs;
uint8_t take_offline = false;
DBG_FUNC("IN\n");
num_intrs = OS_ATOMIC64_READ(softs, num_intrs);
if (PQI_NEW_HEARTBEAT_MECHANISM(softs)) {
if (CTRLR_HEARTBEAT_CNT(softs) == softs->prev_heartbeat_count) {
take_offline = true;
goto take_ctrl_offline;
}
softs->prev_heartbeat_count = CTRLR_HEARTBEAT_CNT(softs);
DBG_INFO("CTRLR_HEARTBEAT_CNT(softs) = %lx \
softs->prev_heartbeat_count = %lx\n",
CTRLR_HEARTBEAT_CNT(softs), softs->prev_heartbeat_count);
} else {
if (num_intrs == softs->prev_num_intrs) {
softs->num_heartbeats_requested++;
if (softs->num_heartbeats_requested > PQI_MAX_HEARTBEAT_REQUESTS) {
take_offline = true;
goto take_ctrl_offline;
}
softs->pending_events[PQI_EVENT_HEARTBEAT].pending = true;
pqisrc_ack_all_events((void*)softs);
} else {
softs->num_heartbeats_requested = 0;
}
softs->prev_num_intrs = num_intrs;
}
take_ctrl_offline:
if (take_offline){
DBG_ERR("controller is offline\n");
pqisrc_take_ctrl_offline(softs);
os_stop_heartbeat_timer(softs);
}
DBG_FUNC("OUT\n");
}
/*
* Conditional variable management routine for internal commands.
*/
int pqisrc_wait_on_condition(pqisrc_softstate_t *softs, rcb_t *rcb){
DBG_FUNC("IN\n");
int ret = PQI_STATUS_SUCCESS;
uint32_t loop_cnt = 0;
while (rcb->req_pending == true) {
OS_SLEEP(500); /* Micro sec */
/*Polling needed for FreeBSD : since ithread routine is not scheduled
during bootup, we could use polling until interrupts are
enabled (using 'if (cold)'to check for the boot time before
interrupts are enabled). */
IS_POLLING_REQUIRED(softs);
if (loop_cnt++ == PQISRC_CMD_TIMEOUT_CNT) {
DBG_ERR("ERR: Requested cmd timed out !!!\n");
ret = PQI_STATUS_TIMEOUT;
break;
}
if (pqisrc_ctrl_offline(softs)) {
DBG_ERR("Controller is Offline");
ret = PQI_STATUS_FAILURE;
break;
}
}
rcb->req_pending = true;
DBG_FUNC("OUT\n");
return ret;
}
/* Function used to validate the device wwid. */
boolean_t pqisrc_device_equal(pqi_scsi_dev_t *dev1,
pqi_scsi_dev_t *dev2)
{
return dev1->wwid == dev2->wwid;
}
/* Function used to validate the device scsi3addr. */
boolean_t pqisrc_scsi3addr_equal(uint8_t *scsi3addr1, uint8_t *scsi3addr2)
{
return memcmp(scsi3addr1, scsi3addr2, 8) == 0;
}
/* Function used to validate hba_lunid */
boolean_t pqisrc_is_hba_lunid(uint8_t *scsi3addr)
{
return pqisrc_scsi3addr_equal(scsi3addr, (uint8_t*)RAID_CTLR_LUNID);
}
/* Function used to validate type of device */
boolean_t pqisrc_is_logical_device(pqi_scsi_dev_t *device)
{
return !device->is_physical_device;
}
/* Function used to sanitize inquiry string */
void pqisrc_sanitize_inquiry_string(unsigned char *s, int len)
{
boolean_t terminated = false;
DBG_FUNC("IN\n");
for (; len > 0; (--len, ++s)) {
if (*s == 0)
terminated = true;
if (terminated || *s < 0x20 || *s > 0x7e)
*s = ' ';
}
DBG_FUNC("OUT\n");
}
static char *raid_levels[] = {
"RAID 0",
"RAID 4",
"RAID 1(1+0)",
"RAID 5",
"RAID 5+1",
"RAID ADG",
"RAID 1(ADM)",
};
/* Get the RAID level from the index */
char *pqisrc_raidlevel_to_string(uint8_t raid_level)
{
DBG_FUNC("IN\n");
if (raid_level < ARRAY_SIZE(raid_levels))
return raid_levels[raid_level];
DBG_FUNC("OUT\n");
return " ";
}
/* Debug routine for displaying device info */
void pqisrc_display_device_info(pqisrc_softstate_t *softs,
char *action, pqi_scsi_dev_t *device)
{
DBG_INFO( "%s scsi BTL %d:%d:%d: %.8s %.16s %-12s SSDSmartPathCap%c En%c Exp%c qd=%d\n",
action,
device->bus,
device->target,
device->lun,
device->vendor,
device->model,
pqisrc_raidlevel_to_string(device->raid_level),
device->offload_config ? '+' : '-',
device->offload_enabled_pending ? '+' : '-',
device->expose_device ? '+' : '-',
device->queue_depth);
pqisrc_raidlevel_to_string(device->raid_level); /* To use this function */
}
/* validate the structure sizes */
void check_struct_sizes()
{
ASSERT(sizeof(SCSI3Addr_struct)== 2);
ASSERT(sizeof(PhysDevAddr_struct) == 8);
ASSERT(sizeof(LogDevAddr_struct)== 8);
ASSERT(sizeof(LUNAddr_struct)==8);
ASSERT(sizeof(RequestBlock_struct) == 20);
ASSERT(sizeof(MoreErrInfo_struct)== 8);
ASSERT(sizeof(ErrorInfo_struct)== 48);
ASSERT(sizeof(IOCTL_Command_struct)== 86);
ASSERT(sizeof(struct bmic_host_wellness_driver_version)== 42);
ASSERT(sizeof(struct bmic_host_wellness_time)== 20);
ASSERT(sizeof(struct pqi_dev_adminq_cap)== 8);
ASSERT(sizeof(struct admin_q_param)== 4);
ASSERT(sizeof(struct pqi_registers)== 256);
ASSERT(sizeof(struct ioa_registers)== 4128);
ASSERT(sizeof(struct pqi_pref_settings)==4);
ASSERT(sizeof(struct pqi_cap)== 20);
ASSERT(sizeof(iu_header_t)== 4);
ASSERT(sizeof(gen_adm_req_iu_t)== 64);
ASSERT(sizeof(gen_adm_resp_iu_t)== 64);
ASSERT(sizeof(op_q_params) == 9);
ASSERT(sizeof(raid_path_error_info_elem_t)== 276);
ASSERT(sizeof(aio_path_error_info_elem_t)== 276);
ASSERT(sizeof(struct init_base_struct)== 24);
ASSERT(sizeof(pqi_iu_layer_desc_t)== 16);
ASSERT(sizeof(pqi_dev_cap_t)== 576);
ASSERT(sizeof(pqi_aio_req_t)== 128);
ASSERT(sizeof(pqisrc_raid_req_t)== 128);
ASSERT(sizeof(pqi_tmf_req_t)== 32);
ASSERT(sizeof(struct pqi_io_response)== 16);
ASSERT(sizeof(struct sense_header_scsi)== 8);
ASSERT(sizeof(reportlun_header_t)==8);
ASSERT(sizeof(reportlun_ext_entry_t)== 24);
ASSERT(sizeof(reportlun_data_ext_t)== 32);
ASSERT(sizeof(raidmap_data_t)==8);
ASSERT(sizeof(pqisrc_raid_map_t)== 8256);
ASSERT(sizeof(bmic_ident_ctrl_t)== 325);
ASSERT(sizeof(bmic_ident_physdev_t)==2048);
}