freebsd-skq/sys/powerpc/mpc85xx/fsl_sata.h
Justin Hibbits 809cd50ff5 Add Freescale QorIQ SATA controller support.
The Freescale SATA controller has many similarities to AHCI controllers, so
this driver is a heavily modified AHCI driver.  Currently it seems to only
do SATA 1.0 speeds (~100-150MB/s), so there is still room for improvement.

Still to be done:
* Address erratum SATA-A-006187 -- Spread Spectrum Support (intermittent
  non-recoverable transient data integrity error seen when SSC enabled).
* Linux doesn't read the log page as it hangs on the P1022.  See if that's
  applicable to this, and address accordingly.
* Try to determine what's holding back performance, and address it.

MFC after:	3 weeks
Differential Revision:	https://reviews.freebsd.org/D6071
2017-11-05 02:47:46 +00:00

142 lines
7.0 KiB
C

/*-
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
* Copyright (c) 2009-2012 Alexander Motin <mav@FreeBSD.org>
* Copyright (c) 2015-2016 Justin Hibbits <jhibbits@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/* ATA register defines */
#define ATA_FEATURE 1 /* (W) feature */
#define ATA_F_DMA 0x01 /* enable DMA */
#define ATA_F_OVL 0x02 /* enable overlap */
#define ATA_COUNT 2 /* (W) sector count */
#define ATA_SECTOR 3 /* (RW) sector # */
#define ATA_CYL_LSB 4 /* (RW) cylinder# LSB */
#define ATA_CYL_MSB 5 /* (RW) cylinder# MSB */
#define ATA_DRIVE 6 /* (W) Sector/Drive/Head */
#define ATA_D_LBA 0x40 /* use LBA addressing */
#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */
#define ATA_COMMAND 7 /* (W) command */
#define ATA_ERROR 8 /* (R) error */
#define ATA_E_ILI 0x01 /* illegal length */
#define ATA_E_NM 0x02 /* no media */
#define ATA_E_ABORT 0x04 /* command aborted */
#define ATA_E_MCR 0x08 /* media change request */
#define ATA_E_IDNF 0x10 /* ID not found */
#define ATA_E_MC 0x20 /* media changed */
#define ATA_E_UNC 0x40 /* uncorrectable data */
#define ATA_E_ICRC 0x80 /* UDMA crc error */
#define ATA_E_ATAPI_SENSE_MASK 0xf0 /* ATAPI sense key mask */
#define ATA_IREASON 9 /* (R) interrupt reason */
#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */
#define ATA_I_IN 0x02 /* read (1) | write (0) */
#define ATA_I_RELEASE 0x04 /* released bus (1) */
#define ATA_I_TAGMASK 0xf8 /* tag mask */
#define ATA_STATUS 10 /* (R) status */
#define ATA_ALTSTAT 11 /* (R) alternate status */
#define ATA_S_ERROR 0x01 /* error */
#define ATA_S_INDEX 0x02 /* index */
#define ATA_S_CORR 0x04 /* data corrected */
#define ATA_S_DRQ 0x08 /* data request */
#define ATA_S_DSC 0x10 /* drive seek completed */
#define ATA_S_SERVICE 0x10 /* drive needs service */
#define ATA_S_DWF 0x20 /* drive write fault */
#define ATA_S_DMA 0x20 /* DMA ready */
#define ATA_S_READY 0x40 /* drive ready */
#define ATA_S_BUSY 0x80 /* busy */
#define ATA_CONTROL 12 /* (W) control */
#define ATA_A_IDS 0x02 /* disable interrupts */
#define ATA_A_RESET 0x04 /* RESET controller */
#define ATA_A_4BIT 0x08 /* 4 head bits */
#define ATA_A_HOB 0x80 /* High Order Byte enable */
/* SATA register defines */
#define ATA_SSTATUS 13
#define ATA_SS_DET_MASK 0x0000000f
#define ATA_SS_DET_NO_DEVICE 0x00000000
#define ATA_SS_DET_DEV_PRESENT 0x00000001
#define ATA_SS_DET_PHY_ONLINE 0x00000003
#define ATA_SS_DET_PHY_OFFLINE 0x00000004
#define ATA_SS_SPD_MASK 0x000000f0
#define ATA_SS_SPD_NO_SPEED 0x00000000
#define ATA_SS_SPD_GEN1 0x00000010
#define ATA_SS_SPD_GEN2 0x00000020
#define ATA_SS_SPD_GEN3 0x00000030
#define ATA_SS_IPM_MASK 0x00000f00
#define ATA_SS_IPM_NO_DEVICE 0x00000000
#define ATA_SS_IPM_ACTIVE 0x00000100
#define ATA_SS_IPM_PARTIAL 0x00000200
#define ATA_SS_IPM_SLUMBER 0x00000600
#define ATA_SS_IPM_DEVSLEEP 0x00000800
#define ATA_SERROR 14
#define ATA_SE_DATA_CORRECTED 0x00000001
#define ATA_SE_COMM_CORRECTED 0x00000002
#define ATA_SE_DATA_ERR 0x00000100
#define ATA_SE_COMM_ERR 0x00000200
#define ATA_SE_PROT_ERR 0x00000400
#define ATA_SE_HOST_ERR 0x00000800
#define ATA_SE_PHY_CHANGED 0x00010000
#define ATA_SE_PHY_IERROR 0x00020000
#define ATA_SE_COMM_WAKE 0x00040000
#define ATA_SE_DECODE_ERR 0x00080000
#define ATA_SE_PARITY_ERR 0x00100000
#define ATA_SE_CRC_ERR 0x00200000
#define ATA_SE_HANDSHAKE_ERR 0x00400000
#define ATA_SE_LINKSEQ_ERR 0x00800000
#define ATA_SE_TRANSPORT_ERR 0x01000000
#define ATA_SE_UNKNOWN_FIS 0x02000000
#define ATA_SE_EXCHANGED 0x04000000
#define ATA_SCONTROL 15
#define ATA_SC_DET_MASK 0x0000000f
#define ATA_SC_DET_IDLE 0x00000000
#define ATA_SC_DET_RESET 0x00000001
#define ATA_SC_DET_DISABLE 0x00000004
#define ATA_SC_SPD_MASK 0x000000f0
#define ATA_SC_SPD_NO_SPEED 0x00000000
#define ATA_SC_SPD_SPEED_GEN1 0x00000010
#define ATA_SC_SPD_SPEED_GEN2 0x00000020
#define ATA_SC_SPD_SPEED_GEN3 0x00000030
#define ATA_SC_IPM_MASK 0x00000f00
#define ATA_SC_IPM_NONE 0x00000000
#define ATA_SC_IPM_DIS_PARTIAL 0x00000100
#define ATA_SC_IPM_DIS_SLUMBER 0x00000200
#define ATA_SC_IPM_DIS_DEVSLEEP 0x00000400