freebsd-skq/sys/arm/mv/mvreg.h
Pedro F. Giffuni 51369649b0 sys: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:43:44 +00:00

462 lines
14 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 2007-2011 MARVELL INTERNATIONAL LTD.
* All rights reserved.
*
* Developed by Semihalf.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of MARVELL nor the names of contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MVREG_H_
#define _MVREG_H_
#include <arm/mv/mvwin.h>
#if defined(SOC_MV_DISCOVERY)
#define IRQ_CAUSE_ERROR 0x0
#define IRQ_CAUSE 0x4
#define IRQ_CAUSE_HI 0x8
#define IRQ_MASK_ERROR 0xC
#define IRQ_MASK 0x10
#define IRQ_MASK_HI 0x14
#define IRQ_CAUSE_SELECT 0x18
#define FIQ_MASK_ERROR 0x1C
#define FIQ_MASK 0x20
#define FIQ_MASK_HI 0x24
#define FIQ_CAUSE_SELECT 0x28
#define ENDPOINT_IRQ_MASK_ERROR(n) 0x2C
#define ENDPOINT_IRQ_MASK(n) 0x30
#define ENDPOINT_IRQ_MASK_HI(n) 0x34
#define ENDPOINT_IRQ_CAUSE_SELECT 0x38
#elif defined (SOC_MV_ARMADAXP)
#define IRQ_CAUSE 0x18
#define IRQ_MASK 0x30
#elif defined (SOC_MV_ARMADA38X)
#define MSI_IRQ 0x3ff
#define ERR_IRQ 0x3ff
#else
#define IRQ_CAUSE 0x0
#define IRQ_MASK 0x4
#define FIQ_MASK 0x8
#define ENDPOINT_IRQ_MASK(n) 0xC
#define IRQ_CAUSE_HI 0x10
#define IRQ_MASK_HI 0x14
#define FIQ_MASK_HI 0x18
#define ENDPOINT_IRQ_MASK_HI(n) 0x1C
#define ENDPOINT_IRQ_MASK_ERROR(n) (-1)
#define IRQ_CAUSE_ERROR (-1) /* Fake defines for unified */
#define IRQ_MASK_ERROR (-1) /* interrupt controller code */
#endif
#if defined(SOC_MV_ARMADAXP)
#define BRIDGE_IRQ_CAUSE 0x68
#define IRQ_TIMER0 0x00000001
#define IRQ_TIMER1 0x00000002
#define IRQ_TIMER_WD 0x00000004
#else
#define BRIDGE_IRQ_CAUSE 0x10
#define IRQ_CPU_SELF 0x00000001
#define IRQ_TIMER0 0x00000002
#define IRQ_TIMER1 0x00000004
#define IRQ_TIMER_WD 0x00000008
#define BRIDGE_IRQ_MASK 0x14
#define IRQ_CPU_MASK 0x00000001
#define IRQ_TIMER0_MASK 0x00000002
#define IRQ_TIMER1_MASK 0x00000004
#define IRQ_TIMER_WD_MASK 0x00000008
#endif
#define IRQ_CPU_SELF_CLR (~IRQ_CPU_SELF)
#define IRQ_TIMER0_CLR (~IRQ_TIMER0)
#define IRQ_TIMER1_CLR (~IRQ_TIMER1)
#define IRQ_TIMER_WD_CLR (~IRQ_TIMER_WD)
/*
* System reset
*/
#if defined(SOC_MV_ARMADAXP) || defined(SOC_MV_ARMADA38X)
#define RSTOUTn_MASK 0x60
#define RSTOUTn_MASK_WD 0x400
#define SYSTEM_SOFT_RESET 0x64
#define WD_RSTOUTn_MASK 0x4
#define WD_GLOBAL_MASK 0x00000100
#define WD_CPU0_MASK 0x00000001
#define SOFT_RST_OUT_EN 0x00000001
#define SYS_SOFT_RST 0x00000001
#else
#define RSTOUTn_MASK 0x8
#define WD_RST_OUT_EN 0x00000002
#define SOFT_RST_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET 0xc
#define SYS_SOFT_RST 0x00000001
#endif
/*
* Power Control
*/
#if defined(SOC_MV_KIRKWOOD)
#define CPU_PM_CTRL 0x18
#else
#define CPU_PM_CTRL 0x1C
#endif
#define CPU_PM_CTRL_NONE 0
#define CPU_PM_CTRL_ALL ~0x0
#if defined(SOC_MV_KIRKWOOD)
#define CPU_PM_CTRL_GE0 (1 << 0)
#define CPU_PM_CTRL_PEX0_PHY (1 << 1)
#define CPU_PM_CTRL_PEX0 (1 << 2)
#define CPU_PM_CTRL_USB0 (1 << 3)
#define CPU_PM_CTRL_SDIO (1 << 4)
#define CPU_PM_CTRL_TSU (1 << 5)
#define CPU_PM_CTRL_DUNIT (1 << 6)
#define CPU_PM_CTRL_RUNIT (1 << 7)
#define CPU_PM_CTRL_XOR0 (1 << 8)
#define CPU_PM_CTRL_AUDIO (1 << 9)
#define CPU_PM_CTRL_SATA0 (1 << 14)
#define CPU_PM_CTRL_SATA1 (1 << 15)
#define CPU_PM_CTRL_XOR1 (1 << 16)
#define CPU_PM_CTRL_CRYPTO (1 << 17)
#define CPU_PM_CTRL_GE1 (1 << 19)
#define CPU_PM_CTRL_TDM (1 << 20)
#define CPU_PM_CTRL_XOR (CPU_PM_CTRL_XOR0 | CPU_PM_CTRL_XOR1)
#define CPU_PM_CTRL_USB(u) (CPU_PM_CTRL_USB0)
#define CPU_PM_CTRL_SATA (CPU_PM_CTRL_SATA0 | CPU_PM_CTRL_SATA1)
#define CPU_PM_CTRL_GE(u) (CPU_PM_CTRL_GE1 * (u) | CPU_PM_CTRL_GE0 * \
(1 - (u)))
#define CPU_PM_CTRL_IDMA (CPU_PM_CTRL_NONE)
#elif defined(SOC_MV_DISCOVERY)
#define CPU_PM_CTRL_GE0 (1 << 1)
#define CPU_PM_CTRL_GE1 (1 << 2)
#define CPU_PM_CTRL_PEX00 (1 << 5)
#define CPU_PM_CTRL_PEX01 (1 << 6)
#define CPU_PM_CTRL_PEX02 (1 << 7)
#define CPU_PM_CTRL_PEX03 (1 << 8)
#define CPU_PM_CTRL_PEX10 (1 << 9)
#define CPU_PM_CTRL_PEX11 (1 << 10)
#define CPU_PM_CTRL_PEX12 (1 << 11)
#define CPU_PM_CTRL_PEX13 (1 << 12)
#define CPU_PM_CTRL_SATA0_PHY (1 << 13)
#define CPU_PM_CTRL_SATA0 (1 << 14)
#define CPU_PM_CTRL_SATA1_PHY (1 << 15)
#define CPU_PM_CTRL_SATA1 (1 << 16)
#define CPU_PM_CTRL_USB0 (1 << 17)
#define CPU_PM_CTRL_USB1 (1 << 18)
#define CPU_PM_CTRL_USB2 (1 << 19)
#define CPU_PM_CTRL_IDMA (1 << 20)
#define CPU_PM_CTRL_XOR (1 << 21)
#define CPU_PM_CTRL_CRYPTO (1 << 22)
#define CPU_PM_CTRL_DEVICE (1 << 23)
#define CPU_PM_CTRL_USB(u) (1 << (17 + (u)))
#define CPU_PM_CTRL_SATA (CPU_PM_CTRL_SATA0 | CPU_PM_CTRL_SATA1)
#define CPU_PM_CTRL_GE(u) (CPU_PM_CTRL_GE1 * (u) | CPU_PM_CTRL_GE0 * \
(1 - (u)))
#else
#define CPU_PM_CTRL_CRYPTO (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_IDMA (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_XOR (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_SATA (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_USB(u) (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_GE(u) (CPU_PM_CTRL_NONE)
#endif
/*
* Timers
*/
#define CPU_TIMERS_BASE 0x300
#define CPU_TIMER_CONTROL 0x0
#define CPU_TIMER0_EN 0x00000001
#define CPU_TIMER0_AUTO 0x00000002
#define CPU_TIMER1_EN 0x00000004
#define CPU_TIMER1_AUTO 0x00000008
#define CPU_TIMER2_EN 0x00000010
#define CPU_TIMER2_AUTO 0x00000020
#define CPU_TIMER_WD_EN 0x00000100
#define CPU_TIMER_WD_AUTO 0x00000200
/* 25MHz mode is Armada XP - specific */
#define CPU_TIMER_WD_25MHZ_EN 0x00000400
#define CPU_TIMER0_25MHZ_EN 0x00000800
#define CPU_TIMER1_25MHZ_EN 0x00001000
#define CPU_TIMER0_REL 0x10
#define CPU_TIMER0 0x14
/*
* SATA
*/
#define SATA_CHAN_NUM 2
#define EDMA_REGISTERS_OFFSET 0x2000
#define EDMA_REGISTERS_SIZE 0x2000
#define SATA_EDMA_BASE(ch) (EDMA_REGISTERS_OFFSET + \
((ch) * EDMA_REGISTERS_SIZE))
/* SATAHC registers */
#define SATA_CR 0x000 /* Configuration Reg. */
#define SATA_CR_NODMABS (1 << 8)
#define SATA_CR_NOEDMABS (1 << 9)
#define SATA_CR_NOPRDPBS (1 << 10)
#define SATA_CR_COALDIS(ch) (1 << (24 + ch))
/* Interrupt Coalescing Threshold Reg. */
#define SATA_ICTR 0x00C
#define SATA_ICTR_MAX ((1 << 8) - 1)
/* Interrupt Time Threshold Reg. */
#define SATA_ITTR 0x010
#define SATA_ITTR_MAX ((1 << 24) - 1)
#define SATA_ICR 0x014 /* Interrupt Cause Reg. */
#define SATA_ICR_DMADONE(ch) (1 << (ch))
#define SATA_ICR_COAL (1 << 4)
#define SATA_ICR_DEV(ch) (1 << (8 + ch))
#define SATA_MICR 0x020 /* Main Interrupt Cause Reg. */
#define SATA_MICR_ERR(ch) (1 << (2 * ch))
#define SATA_MICR_DONE(ch) (1 << ((2 * ch) + 1))
#define SATA_MICR_DMADONE(ch) (1 << (4 + ch))
#define SATA_MICR_COAL (1 << 8)
#define SATA_MIMR 0x024 /* Main Interrupt Mask Reg. */
/* Shadow registers */
#define SATA_SHADOWR_BASE(ch) (SATA_EDMA_BASE(ch) + 0x100)
#define SATA_SHADOWR_CONTROL(ch) (SATA_EDMA_BASE(ch) + 0x120)
/* SATA registers */
#define SATA_SATA_SSTATUS(ch) (SATA_EDMA_BASE(ch) + 0x300)
#define SATA_SATA_SERROR(ch) (SATA_EDMA_BASE(ch) + 0x304)
#define SATA_SATA_SCONTROL(ch) (SATA_EDMA_BASE(ch) + 0x308)
#define SATA_SATA_FISICR(ch) (SATA_EDMA_BASE(ch) + 0x364)
/* EDMA registers */
#define SATA_EDMA_CFG(ch) (SATA_EDMA_BASE(ch) + 0x000)
#define SATA_EDMA_CFG_QL128 (1 << 19)
#define SATA_EDMA_CFG_HQCACHE (1 << 22)
#define SATA_EDMA_IECR(ch) (SATA_EDMA_BASE(ch) + 0x008)
#define SATA_EDMA_IEMR(ch) (SATA_EDMA_BASE(ch) + 0x00C)
#define SATA_EDMA_REQBAHR(ch) (SATA_EDMA_BASE(ch) + 0x010)
#define SATA_EDMA_REQIPR(ch) (SATA_EDMA_BASE(ch) + 0x014)
#define SATA_EDMA_REQOPR(ch) (SATA_EDMA_BASE(ch) + 0x018)
#define SATA_EDMA_RESBAHR(ch) (SATA_EDMA_BASE(ch) + 0x01C)
#define SATA_EDMA_RESIPR(ch) (SATA_EDMA_BASE(ch) + 0x020)
#define SATA_EDMA_RESOPR(ch) (SATA_EDMA_BASE(ch) + 0x024)
#define SATA_EDMA_CMD(ch) (SATA_EDMA_BASE(ch) + 0x028)
#define SATA_EDMA_CMD_ENABLE (1 << 0)
#define SATA_EDMA_CMD_DISABLE (1 << 1)
#define SATA_EDMA_CMD_RESET (1 << 2)
#define SATA_EDMA_STATUS(ch) (SATA_EDMA_BASE(ch) + 0x030)
#define SATA_EDMA_STATUS_IDLE (1 << 7)
/* Offset to extract input slot from REQIPR register */
#define SATA_EDMA_REQIS_OFS 5
/* Offset to extract input slot from RESOPR register */
#define SATA_EDMA_RESOS_OFS 3
/*
* GPIO
*/
#define GPIO_DATA_OUT 0x00
#define GPIO_DATA_OUT_EN_CTRL 0x04
#define GPIO_BLINK_EN 0x08
#define GPIO_DATA_IN_POLAR 0x0c
#define GPIO_DATA_IN 0x10
#define GPIO_INT_CAUSE 0x14
#define GPIO_INT_EDGE_MASK 0x18
#define GPIO_INT_LEV_MASK 0x1c
#define GPIO_HI_DATA_OUT 0x40
#define GPIO_HI_DATA_OUT_EN_CTRL 0x44
#define GPIO_HI_BLINK_EN 0x48
#define GPIO_HI_DATA_IN_POLAR 0x4c
#define GPIO_HI_DATA_IN 0x50
#define GPIO_HI_INT_CAUSE 0x54
#define GPIO_HI_INT_EDGE_MASK 0x58
#define GPIO_HI_INT_LEV_MASK 0x5c
#define GPIO(n) (1 << (n))
#define MV_GPIO_MAX_NPINS 64
#define MV_GPIO_IN_NONE 0x0
#define MV_GPIO_IN_POL_LOW (1 << 16)
#define MV_GPIO_IN_IRQ_EDGE (2 << 16)
#define MV_GPIO_IN_IRQ_LEVEL (4 << 16)
#define MV_GPIO_OUT_NONE 0x0
#define MV_GPIO_OUT_BLINK 0x1
#define MV_GPIO_OUT_OPEN_DRAIN 0x2
#define MV_GPIO_OUT_OPEN_SRC 0x4
#define IS_GPIO_IRQ(irq) ((irq) >= NIRQ && (irq) < NIRQ + MV_GPIO_MAX_NPINS)
#define GPIO2IRQ(gpio) ((gpio) + NIRQ)
#define IRQ2GPIO(irq) ((irq) - NIRQ)
#if defined(SOC_MV_ORION)
#define SAMPLE_AT_RESET 0x10
#elif defined(SOC_MV_KIRKWOOD)
#define SAMPLE_AT_RESET 0x30
#elif defined(SOC_MV_ARMADA38X)
#define SAMPLE_AT_RESET 0x400
#endif
#if defined(SOC_MV_DISCOVERY) || defined(SOC_MV_ARMADAXP)
#define SAMPLE_AT_RESET_LO 0x30
#define SAMPLE_AT_RESET_HI 0x34
#endif
/*
* Clocks
*/
#if defined(SOC_MV_ORION)
#define TCLK_MASK 0x00000300
#define TCLK_SHIFT 0x08
#elif defined(SOC_MV_DISCOVERY)
#define TCLK_MASK 0x00000180
#define TCLK_SHIFT 0x07
#elif defined(SOC_MV_ARMADA38X)
#define TCLK_MASK 0x00008000
#define TCLK_SHIFT 15
#endif
#define TCLK_100MHZ 100000000
#define TCLK_125MHZ 125000000
#define TCLK_133MHZ 133333333
#define TCLK_150MHZ 150000000
#define TCLK_166MHZ 166666667
#define TCLK_200MHZ 200000000
#define TCLK_250MHZ 250000000
#define TCLK_300MHZ 300000000
#define TCLK_667MHZ 667000000
#define A38X_CPU_DDR_CLK_MASK 0x00007c00
#define A38X_CPU_DDR_CLK_SHIFT 10
/*
* CPU Cache Configuration
*/
#define CPU_CONFIG 0x00000000
#define CPU_CONFIG_IC_PREF 0x00010000
#define CPU_CONFIG_DC_PREF 0x00020000
#define CPU_CONTROL 0x00000004
#define CPU_CONTROL_L2_SIZE 0x00200000 /* Only on Discovery */
#define CPU_CONTROL_L2_MODE 0x00020000 /* Only on Discovery */
#define CPU_L2_CONFIG 0x00000028 /* Only on Kirkwood */
#define CPU_L2_CONFIG_MODE 0x00000010 /* Only on Kirkwood */
/*
* PCI Express port control (CPU Control registers)
*/
#define CPU_CONTROL_PCIE_DISABLE(n) (1 << (3 * (n)))
/*
* Vendor ID
*/
#define PCI_VENDORID_MRVL 0x11AB
#define PCI_VENDORID_MRVL2 0x1B4B
/*
* Chip ID
*/
#define MV_DEV_88F5181 0x5181
#define MV_DEV_88F5182 0x5182
#define MV_DEV_88F5281 0x5281
#define MV_DEV_88F6281 0x6281
#define MV_DEV_88F6282 0x6282
#define MV_DEV_88F6781 0x6781
#define MV_DEV_88F6828 0x6828
#define MV_DEV_88F6820 0x6820
#define MV_DEV_88F6810 0x6810
#define MV_DEV_MV78100_Z0 0x6381
#define MV_DEV_MV78100 0x7810
#define MV_DEV_MV78130 0x7813
#define MV_DEV_MV78160 0x7816
#define MV_DEV_MV78230 0x7823
#define MV_DEV_MV78260 0x7826
#define MV_DEV_MV78460 0x7846
#define MV_DEV_88RC8180 0x8180
#define MV_DEV_88RC9480 0x9480
#define MV_DEV_88RC9580 0x9580
#define MV_DEV_FAMILY_MASK 0xff00
#define MV_DEV_DISCOVERY 0x7800
#define MV_DEV_ARMADA38X 0x6800
/*
* Doorbell register control
*/
#define MV_DRBL_PCIE_TO_CPU 0
#define MV_DRBL_CPU_TO_PCIE 1
#define MV_DRBL_CAUSE(d,u) (0x10 * (u) + 0x8 * (d))
#define MV_DRBL_MASK(d,u) (0x10 * (u) + 0x8 * (d) + 0x4)
#define MV_DRBL_MSG(m,d,u) (0x10 * (u) + 0x8 * (d) + 0x4 * (m) + 0x30)
/*
* SCU
*/
#if defined(SOC_MV_ARMADA38X)
#define MV_SCU_BASE (MV_BASE + 0xc000)
#define MV_SCU_REGS_LEN 0x100
#define MV_SCU_REG_CTRL 0x00
#define MV_SCU_REG_CONFIG 0x04
#define MV_SCU_ENABLE (1 << 0)
#define MV_SCU_SL_L2_ENABLE (1 << 3)
#define SCU_CFG_REG_NCPU_MASK 0x3
#endif
/*
* PMSU
*/
#if defined(SOC_MV_ARMADA38X)
#define MV_PMSU_BASE (MV_BASE + 0x22000)
#define MV_PMSU_REGS_LEN 0x1000
#define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) (((cpu) * 0x100) + 0x124)
#endif
/*
* CPU RESET
*/
#if defined(SOC_MV_ARMADA38X)
#define MV_CPU_RESET_BASE (MV_BASE + 0x20800)
#define MV_CPU_RESET_REGS_LEN 0x8
#define CPU_RESET_OFFSET(cpu) ((cpu) * 0x8)
#define CPU_RESET_ASSERT 0x1
#endif
#if defined(SOC_MV_ARMADA38X)
#define MV_MBUS_CTRL_BASE (MV_BASE + 0x20420)
#define MV_MBUS_CTRL_REGS_LEN 0x10
#endif
#endif /* _MVREG_H_ */