freebsd-skq/sys/i386/isa/sound/sound_config.h
Bruce Evans d49c99ba9c Fix enough of the recently introduced brokenness for LINT to compile.
The U6850* changes in sound_config.h are probably wrong.

Recent commits lost:
- include paths.
- copyrights.
- cvs Ids.
- infamous whitespace changes.
- other cosmetic changes.
1995-07-29 14:20:54 +00:00

352 lines
7.4 KiB
C

/* sound_config.h
*
* A driver for Soundcards, misc configuration parameters.
*
*
* Copyright by Hannu Savolainen 1993
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include "local.h"
#include "os.h"
#include "soundvers.h"
#if !defined(PSS_MPU_BASE) && defined(EXCLUDE_SSCAPE) && defined(EXCLUDE_TRIX)
#define EXCLUDE_MPU_EMU
#endif
#if defined(ISC) || defined(SCO) || defined(SVR42)
#define GENERIC_SYSV
#endif
/*
* Disable the AD1848 driver if there are no other drivers requiring it.
*/
#if defined(EXCLUDE_GUS16) && defined(EXCLUDE_MSS) && defined(EXCLUDE_PSS) && defined(EXCLUDE_GUSMAX) && defined(EXCLUDE_SSCAPE) && defined(EXCLUDE_TRIX)
#define EXCLUDE_AD1848
#endif
#ifdef PSS_MSS_BASE
#undef EXCLUDE_AD1848
#endif
#undef CONFIGURE_SOUNDCARD
#undef DYNAMIC_BUFFER
#ifdef KERNEL_SOUNDCARD
#define CONFIGURE_SOUNDCARD
#define DYNAMIC_BUFFER
#undef LOADABLE_SOUNDCARD
#endif
#ifdef EXCLUDE_SEQUENCER
#define EXCLUDE_MIDI
#define EXCLUDE_YM3812
#define EXCLUDE_OPL3
#endif
#ifndef SND_DEFAULT_ENABLE
#define SND_DEFAULT_ENABLE 1
#endif
#ifdef CONFIGURE_SOUNDCARD
/* ****** IO-address, DMA and IRQ settings ****
If your card has nonstandard I/O address or IRQ number, change defines
for the following settings in your kernel Makefile */
#ifndef SBC_BASE
#define SBC_BASE 0x220 /* 0x220 is the factory default. */
#endif
#ifndef SBC_IRQ
#define SBC_IRQ 7 /* IQR7 is the factory default. */
#endif
#ifndef SBC_DMA
#define SBC_DMA 1
#endif
#ifndef SB16_DMA
#define SB16_DMA 6
#endif
#ifndef SB16MIDI_BASE
#define SB16MIDI_BASE 0x300
#endif
#ifndef PAS_BASE
#define PAS_BASE 0x388
#endif
#ifndef PAS_IRQ
#define PAS_IRQ 5
#endif
#ifndef PAS_DMA
#define PAS_DMA 3
#endif
#ifndef GUS_BASE
#define GUS_BASE 0x220
#endif
#ifndef GUS_IRQ
#define GUS_IRQ 15
#endif
#ifndef GUS_MIDI_IRQ
#define GUS_MIDI_IRQ GUS_IRQ
#endif
#ifndef GUS_DMA
#define GUS_DMA 6
#endif
#ifndef GUS_DMA_READ
#define GUS_DMA_READ 3
#endif
#ifndef MPU_BASE
#define MPU_BASE 0x330
#endif
#ifndef MPU_IRQ
#define MPU_IRQ 6
#endif
/* Echo Personal Sound System */
#ifndef PSS_BASE
#define PSS_BASE 0x220 /* 0x240 or */
#endif
#ifndef PSS_IRQ
#define PSS_IRQ 7
#endif
#ifndef PSS_DMA
#define PSS_DMA 1
#endif
#ifndef MSS_BASE
#define MSS_BASE 0
#endif
#ifndef MSS_DMA
#define MSS_DMA 0
#endif
#ifndef MSS_IRQ
#define MSS_IRQ 0
#endif
#ifndef GUS16_BASE
#define GUS16_BASE 0
#endif
#ifndef GUS16_DMA
#define GUS16_DMA 0
#endif
#ifndef GUS16_IRQ
#define GUS16_IRQ 0
#endif
#ifndef SSCAPE_BASE
#define SSCAPE_BASE 0
#endif
#ifndef SSCAPE_DMA
#define SSCAPE_DMA 0
#endif
#ifndef SSCAPE_IRQ
#define SSCAPE_IRQ 0
#endif
#ifndef SSCAPE_MSS_BASE
#define SSCAPE_MSS_BASE 0
#endif
#ifndef SSCAPE_MSS_DMA
#define SSCAPE_MSS_DMA 0
#endif
#ifndef SSCAPE_MSS_IRQ
#define SSCAPE_MSS_IRQ 0
#endif
#ifndef TRIX_BASE
#define TRIX_BASE 0x530
#endif
#ifndef TRIX_IRQ
#define TRIX_IRQ 10
#endif
#ifndef TRIX_DMA
#define TRIX_DMA 1
#endif
#ifndef U6850_BASE
#define U6850_BASE 0x330
#endif
#ifndef U6850_IRQ
#define U6850_IRQ 5
#endif
#ifndef U6850_DMA
#define U6850_DMA 1
#endif
#ifndef MAX_REALTIME_FACTOR
#define MAX_REALTIME_FACTOR 4
#endif
/************* PCM DMA buffer sizes *******************/
/* If you are using high playback or recording speeds, the default buffersize
is too small. DSP_BUFFSIZE must be 64k or less.
A rule of thumb is 64k for PAS16, 32k for PAS+, 16k for SB Pro and
4k for SB.
If you change the DSP_BUFFSIZE, don't modify this file.
Use the make config command instead. */
#ifndef DSP_BUFFSIZE
#define DSP_BUFFSIZE (4096)
#endif
#ifndef DSP_BUFFCOUNT
#define DSP_BUFFCOUNT 2 /* 2 is recommended. */
#endif
#define DMA_AUTOINIT 0x10
#define FM_MONO 0x388 /* This is the I/O address used by AdLib */
/* SEQ_MAX_QUEUE is the maximum number of sequencer events buffered by the
driver. (There is no need to alter this) */
#define SEQ_MAX_QUEUE 1024
#define SBFM_MAXINSTR (256) /* Size of the FM Instrument bank */
/* 128 instruments for general MIDI setup and 16 unassigned */
/*
* Minor numbers for the sound driver.
*
* Unfortunately Creative called the codec chip of SB as a DSP. For this
* reason the /dev/dsp is reserved for digitized audio use. There is a
* device for true DSP processors but it will be called something else.
* In v3.0 it's /dev/sndproc but this could be a temporary solution.
*/
#define SND_NDEVS 256 /* Number of supported devices */
#define SND_DEV_CTL 0 /* Control port /dev/mixer */
#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM
synthesizer and MIDI output) */
#define SND_DEV_MIDIN 2 /* Raw midi access */
#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */
#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */
#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */
#define SND_DEV_STATUS 6 /* /dev/sndstat */
/* #7 not in use now. Was in 2.4. Free for use after v3.0. */
#define SND_DEV_SEQ2 8 /* /dev/sequecer, level 2 interface */
#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */
#define SND_DEV_PSS SND_DEV_SNDPROC
#define DSP_DEFAULT_SPEED 8000
#define ON 1
#define OFF 0
#define MAX_AUDIO_DEV 5
#define MAX_MIXER_DEV 5
#define MAX_SYNTH_DEV 3
#define MAX_MIDI_DEV 6
#define MAX_TIMER_DEV 3
struct fileinfo {
int mode; /* Open mode */
DECLARE_FILE(); /* Reference to file-flags. OS-dependent. */
};
struct address_info {
int io_base;
int irq;
int dma; /* write dma channel */
int dma_read; /* read dma channel */
int always_detect; /* 1=Trust me, it's there */
};
#define SYNTH_MAX_VOICES 32
struct voice_alloc_info {
int max_voice;
int used_voices;
int ptr; /* For device specific use */
unsigned short map[SYNTH_MAX_VOICES]; /* (ch << 8) | (note+1) */
int timestamp;
int alloc_times[SYNTH_MAX_VOICES];
};
struct channel_info {
int pgm_num;
int bender_value;
unsigned char controllers[128];
};
/*
* Process wakeup reasons
*/
#define WK_NONE 0x00
#define WK_WAKEUP 0x01
#define WK_TIMEOUT 0x02
#define WK_SIGNAL 0x04
#define WK_SLEEP 0x08
#define OPEN_READ 1
#define OPEN_WRITE 2
#define OPEN_READWRITE 3
#include "sound_calls.h"
#include "dev_table.h"
#ifndef DEB
#define DEB(x)
#endif
#ifndef AUDIO_DDB
#define AUDIO_DDB(x)
#endif
#define TIMER_ARMED 121234
#define TIMER_NOT_ARMED 1
#endif