6f0e1ffd07
src/sys/dev/usb2/core/usbdevs src/sys/dev/usb2/include/urio2_ioctl.h src/sys/dev/usb2/storage/ustorage2_fs.h These files are not used any more. src/usr.sbin/Makefile src/etc/mtree/BSD.include.dist src/include/Makefile src/lib/Makefile src/share/man/man7/hier.7 src/share/mk/bsd.libnames.mk src/etc/mtree/BSD.include.dist Make "usbconfig" and "libusb20" a part of the default build. src/sys/dev/usb/rio500_usb.h src/sys/dev/usb2/storage/urio2.c Use common include file. src/sys/dev/usb2/bluetooth/ng_ubt2.c Make USB bluetooth depend on "ng_hci" module. src/sys/dev/usb2/controller/ehci2.c src/sys/dev/usb2/controller/ehci2.h Patches for Marvell EHCI. src/sys/dev/usb2/core/usb2_busdma.c Bugfix for 64-bit platforms. Need to unload the previously loaded DMA map and some cleanup regarding some corner cases. src/sys/dev/usb2/core/usb2_core.h src/sys/dev/usb2/core/usb2_dev.c src/sys/dev/usb2/core/usb2_dev.h Bugfix for libusb filesystem interface. New feature: Add support for filtering device data at the expense of the userland process. Add some more comments. Some minor code styling. Remove unused function, usb2_fifo_get_data_next(). Fix an issue about "fifo_index" being used instead of "ep_index". src/sys/dev/usb2/core/usb2_device.c src/sys/dev/usb2/core/usb2_generic.c Bugfix for Linux USB compat layer. Do not free non-generic FIFOs when doing an alternate setting. Cleanup USB IOCTL and USB reference handling. Fix a corner case where USB-FS was left initialised after setting a new configuration or alternate setting. src/sys/dev/usb2/core/usb2_hub.c Improvement: Check all USB HUB ports by default at least one time. src/sys/dev/usb2/core/usb2_request.c Bugfix: Make sure destination ASCII string is properly zero terminated in all cases. Improvement: Skip invalid characters instead of replacing with a dot. src/sys/dev/usb2/core/usb2_util.c src/sys/dev/usb2/image/uscanner2.c Spelling. src/sys/dev/usb2/include/Makefile Share "usbdevs" with the old USB stack. src/sys/dev/usb2/include/usb2_devid.h src/sys/dev/usb2/include/usb2_devtable.h Regenerate files. Alfred: Please fix the RCS tag at the top. src/sys/dev/usb2/include/usb2_ioctl.h Fix compilation of "kdump". src/sys/dev/usb2/serial/ubsa2.c src/sys/dev/usb2/serial/ugensa2.c Remove device ID's which will end up in a new 3G driver. src/sys/dev/usb2/sound/uaudio2.c Correct a debug printout. src/sys/dev/usb2/storage/umass2.c Sync with old USB stack. src/lib/libusb20/libusb20.3 Add more documentation. src/lib/libusb20/libusb20.c Various bugfixes and improvements. src/usr.sbin/usbconfig/dump.c src/usr.sbin/usbconfig/usbconfig.c New commands for dumping strings and doing custom USB requests from the command line. Remove keyword requirements from generated files: "head/sys/dev/usb2/include/usb2_devid.h" "head/sys/dev/usb2/include/usb2_devtable.h"
796 lines
18 KiB
C
796 lines
18 KiB
C
/* $FreeBSD$ */
|
|
/*-
|
|
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <stdint.h>
|
|
#include <err.h>
|
|
#include <string.h>
|
|
#include <pwd.h>
|
|
#include <grp.h>
|
|
#include <errno.h>
|
|
#include <ctype.h>
|
|
|
|
#include <libusb20_desc.h>
|
|
#include <libusb20.h>
|
|
|
|
#include "dump.h"
|
|
|
|
struct options {
|
|
const char *quirkname;
|
|
void *buffer;
|
|
gid_t gid;
|
|
uid_t uid;
|
|
mode_t mode;
|
|
uint32_t got_any;
|
|
struct LIBUSB20_CONTROL_SETUP_DECODED setup;
|
|
uint16_t bus;
|
|
uint16_t addr;
|
|
uint16_t iface;
|
|
uint16_t vid;
|
|
uint16_t pid;
|
|
uint16_t lo_rev; /* inclusive */
|
|
uint16_t hi_rev; /* inclusive */
|
|
uint8_t string_index;
|
|
uint8_t config_index;
|
|
uint8_t alt_index;
|
|
uint8_t got_list:1;
|
|
uint8_t got_bus:1;
|
|
uint8_t got_addr:1;
|
|
uint8_t got_iface:1;
|
|
uint8_t got_set_config:1;
|
|
uint8_t got_set_alt:1;
|
|
uint8_t got_set_owner:1;
|
|
uint8_t got_set_perm:1;
|
|
uint8_t got_suspend:1;
|
|
uint8_t got_resume:1;
|
|
uint8_t got_reset:1;
|
|
uint8_t got_power_off:1;
|
|
uint8_t got_power_save:1;
|
|
uint8_t got_power_on:1;
|
|
uint8_t got_dump_device_quirks:1;
|
|
uint8_t got_dump_quirk_names:1;
|
|
uint8_t got_dump_device_desc:1;
|
|
uint8_t got_dump_curr_config:1;
|
|
uint8_t got_dump_all_config:1;
|
|
uint8_t got_dump_info:1;
|
|
uint8_t got_dump_access:1;
|
|
uint8_t got_remove_device_quirk:1;
|
|
uint8_t got_add_device_quirk:1;
|
|
uint8_t got_dump_string:1;
|
|
uint8_t got_do_request:1;
|
|
};
|
|
|
|
struct token {
|
|
const char *name;
|
|
uint8_t value;
|
|
uint8_t narg;
|
|
};
|
|
|
|
enum {
|
|
T_UNIT,
|
|
T_ADDR,
|
|
T_IFACE,
|
|
T_SET_CONFIG,
|
|
T_SET_ALT,
|
|
T_SET_OWNER,
|
|
T_SET_PERM,
|
|
T_ADD_DEVICE_QUIRK,
|
|
T_REMOVE_DEVICE_QUIRK,
|
|
T_DUMP_QUIRK_NAMES,
|
|
T_DUMP_DEVICE_QUIRKS,
|
|
T_DUMP_DEVICE_DESC,
|
|
T_DUMP_CURR_CONFIG_DESC,
|
|
T_DUMP_ALL_CONFIG_DESC,
|
|
T_DUMP_STRING,
|
|
T_DUMP_ACCESS,
|
|
T_DUMP_INFO,
|
|
T_SUSPEND,
|
|
T_RESUME,
|
|
T_POWER_OFF,
|
|
T_POWER_SAVE,
|
|
T_POWER_ON,
|
|
T_RESET,
|
|
T_LIST,
|
|
T_DO_REQUEST,
|
|
};
|
|
|
|
static struct options options;
|
|
|
|
static const struct token token[] = {
|
|
{"-u", T_UNIT, 1},
|
|
{"-a", T_ADDR, 1},
|
|
{"-i", T_IFACE, 1},
|
|
{"set_config", T_SET_CONFIG, 1},
|
|
{"set_alt", T_SET_ALT, 1},
|
|
{"set_owner", T_SET_OWNER, 1},
|
|
{"set_perm", T_SET_PERM, 1},
|
|
{"add_dev_quirk_vplh", T_ADD_DEVICE_QUIRK, 5},
|
|
{"remove_dev_quirk_vplh", T_REMOVE_DEVICE_QUIRK, 5},
|
|
{"dump_quirk_names", T_DUMP_QUIRK_NAMES, 0},
|
|
{"dump_device_quirks", T_DUMP_DEVICE_QUIRKS, 0},
|
|
{"dump_device_desc", T_DUMP_DEVICE_DESC, 0},
|
|
{"dump_curr_config_desc", T_DUMP_CURR_CONFIG_DESC, 0},
|
|
{"dump_all_config_desc", T_DUMP_ALL_CONFIG_DESC, 0},
|
|
{"dump_string", T_DUMP_STRING, 1},
|
|
{"dump_access", T_DUMP_ACCESS, 0},
|
|
{"dump_info", T_DUMP_INFO, 0},
|
|
{"suspend", T_SUSPEND, 0},
|
|
{"resume", T_RESUME, 0},
|
|
{"power_off", T_POWER_OFF, 0},
|
|
{"power_save", T_POWER_SAVE, 0},
|
|
{"power_on", T_POWER_ON, 0},
|
|
{"reset", T_RESET, 0},
|
|
{"list", T_LIST, 0},
|
|
{"do_request", T_DO_REQUEST, 5},
|
|
};
|
|
|
|
static void
|
|
be_dev_remove_quirk(struct libusb20_backend *pbe,
|
|
uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
|
|
const char *str)
|
|
{
|
|
struct libusb20_quirk q;
|
|
int error;
|
|
|
|
memset(&q, 0, sizeof(q));
|
|
|
|
q.vid = vid;
|
|
q.pid = pid;
|
|
q.bcdDeviceLow = lorev;
|
|
q.bcdDeviceHigh = hirev;
|
|
strlcpy(q.quirkname, str, sizeof(q.quirkname));
|
|
|
|
error = libusb20_be_remove_dev_quirk(pbe, &q);
|
|
if (error) {
|
|
printf("Removing quirk '%s' failed, continuing.\n", str);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void
|
|
be_dev_add_quirk(struct libusb20_backend *pbe,
|
|
uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
|
|
const char *str)
|
|
{
|
|
struct libusb20_quirk q;
|
|
int error;
|
|
|
|
memset(&q, 0, sizeof(q));
|
|
|
|
q.vid = vid;
|
|
q.pid = pid;
|
|
q.bcdDeviceLow = lorev;
|
|
q.bcdDeviceHigh = hirev;
|
|
strlcpy(q.quirkname, str, sizeof(q.quirkname));
|
|
|
|
error = libusb20_be_add_dev_quirk(pbe, &q);
|
|
if (error) {
|
|
printf("Adding quirk '%s' failed, continuing.\n", str);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static uint8_t
|
|
get_token(const char *str, uint8_t narg)
|
|
{
|
|
uint8_t n;
|
|
|
|
for (n = 0; n != (sizeof(token) / sizeof(token[0])); n++) {
|
|
if (strcasecmp(str, token[n].name) == 0) {
|
|
if (token[n].narg > narg) {
|
|
/* too few arguments */
|
|
break;
|
|
}
|
|
return (token[n].value);
|
|
}
|
|
}
|
|
return (0 - 1);
|
|
}
|
|
|
|
static uid_t
|
|
num_id(const char *name, const char *type)
|
|
{
|
|
uid_t val;
|
|
char *ep;
|
|
|
|
errno = 0;
|
|
val = strtoul(name, &ep, 0);
|
|
if (errno) {
|
|
err(1, "%s", name);
|
|
}
|
|
if (*ep != '\0') {
|
|
errx(1, "%s: illegal %s name", name, type);
|
|
}
|
|
return (val);
|
|
}
|
|
|
|
static gid_t
|
|
a_gid(const char *s)
|
|
{
|
|
struct group *gr;
|
|
|
|
if (*s == '\0') {
|
|
/* empty group ID */
|
|
return ((gid_t)-1);
|
|
}
|
|
return ((gr = getgrnam(s)) ? gr->gr_gid : num_id(s, "group"));
|
|
}
|
|
|
|
static uid_t
|
|
a_uid(const char *s)
|
|
{
|
|
struct passwd *pw;
|
|
|
|
if (*s == '\0') {
|
|
/* empty user ID */
|
|
return ((uid_t)-1);
|
|
}
|
|
return ((pw = getpwnam(s)) ? pw->pw_uid : num_id(s, "user"));
|
|
}
|
|
|
|
static mode_t
|
|
a_mode(const char *s)
|
|
{
|
|
uint16_t val;
|
|
char *ep;
|
|
|
|
errno = 0;
|
|
val = strtoul(s, &ep, 8);
|
|
if (errno) {
|
|
err(1, "%s", s);
|
|
}
|
|
if (*ep != '\0') {
|
|
errx(1, "illegal permissions: %s", s);
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
usage(void)
|
|
{
|
|
printf(""
|
|
"usbconfig - configure the USB subsystem" "\n"
|
|
"usage: usbconfig -u <busnum> -a <devaddr> -i <ifaceindex> [cmds...]" "\n"
|
|
"commands:" "\n"
|
|
" set_config <cfg_index>" "\n"
|
|
" set_alt <alt_index>" "\n"
|
|
" set_owner <user:group>" "\n"
|
|
" set_perm <mode>" "\n"
|
|
" add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
|
|
" remove_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
|
|
" dump_quirk_names" "\n"
|
|
" dump_device_quirks" "\n"
|
|
" dump_device_desc" "\n"
|
|
" dump_curr_config_desc" "\n"
|
|
" dump_all_config_desc" "\n"
|
|
" dump_string <index>" "\n"
|
|
" dump_access" "\n"
|
|
" dump_info" "\n"
|
|
" suspend" "\n"
|
|
" resume" "\n"
|
|
" power_off" "\n"
|
|
" power_save" "\n"
|
|
" power_on" "\n"
|
|
" reset" "\n"
|
|
" list" "\n"
|
|
" do_request <bmReqTyp> <bReq> <wVal> <wIdx> <wLen> <data...>" "\n"
|
|
);
|
|
exit(1);
|
|
}
|
|
|
|
static void
|
|
reset_options(struct options *opt)
|
|
{
|
|
if (opt->buffer)
|
|
free(opt->buffer);
|
|
memset(opt, 0, sizeof(*opt));
|
|
return;
|
|
}
|
|
|
|
static void
|
|
flush_command(struct libusb20_backend *pbe, struct options *opt)
|
|
{
|
|
struct libusb20_device *pdev = NULL;
|
|
uint32_t matches = 0;
|
|
uint8_t dump_any;
|
|
|
|
/* check for invalid option combinations */
|
|
if ((opt->got_suspend +
|
|
opt->got_resume +
|
|
opt->got_reset +
|
|
opt->got_set_config +
|
|
opt->got_set_alt +
|
|
opt->got_power_save +
|
|
opt->got_power_on +
|
|
opt->got_power_off) > 1) {
|
|
err(1, "cannot only specify one of 'set_config', "
|
|
"'set_alt', 'reset', 'suspend', 'resume', "
|
|
"'power_save', 'power_on' and 'power_off' "
|
|
"at the same time!");
|
|
}
|
|
if (opt->got_dump_access) {
|
|
opt->got_any--;
|
|
dump_be_access(pbe);
|
|
}
|
|
if (opt->got_dump_quirk_names) {
|
|
opt->got_any--;
|
|
dump_be_quirk_names(pbe);
|
|
}
|
|
if (opt->got_dump_device_quirks) {
|
|
opt->got_any--;
|
|
dump_be_dev_quirks(pbe);
|
|
}
|
|
if (opt->got_remove_device_quirk) {
|
|
opt->got_any--;
|
|
be_dev_remove_quirk(pbe,
|
|
opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
|
|
}
|
|
if (opt->got_add_device_quirk) {
|
|
opt->got_any--;
|
|
be_dev_add_quirk(pbe,
|
|
opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
|
|
}
|
|
if (opt->got_any == 0) {
|
|
/*
|
|
* do not scan through all the devices if there are no valid
|
|
* options
|
|
*/
|
|
goto done;
|
|
}
|
|
while ((pdev = libusb20_be_device_foreach(pbe, pdev))) {
|
|
|
|
if (opt->got_bus &&
|
|
(libusb20_dev_get_bus_number(pdev) != opt->bus)) {
|
|
continue;
|
|
}
|
|
if (opt->got_addr &&
|
|
(libusb20_dev_get_address(pdev) != opt->addr)) {
|
|
continue;
|
|
}
|
|
matches++;
|
|
|
|
/* do owner and permissions first */
|
|
|
|
if (opt->got_bus && opt->got_addr && opt->got_iface) {
|
|
if (opt->got_set_owner) {
|
|
if (libusb20_dev_set_iface_owner(pdev,
|
|
opt->iface, opt->uid, opt->gid)) {
|
|
err(1, "setting owner and group failed\n");
|
|
}
|
|
}
|
|
if (opt->got_set_perm) {
|
|
if (libusb20_dev_set_iface_perm(pdev,
|
|
opt->iface, opt->mode)) {
|
|
err(1, "setting mode failed\n");
|
|
}
|
|
}
|
|
} else if (opt->got_bus && opt->got_addr) {
|
|
if (opt->got_set_owner) {
|
|
if (libusb20_dev_set_owner(pdev,
|
|
opt->uid, opt->gid)) {
|
|
err(1, "setting owner and group failed\n");
|
|
}
|
|
}
|
|
if (opt->got_set_perm) {
|
|
if (libusb20_dev_set_perm(pdev,
|
|
opt->mode)) {
|
|
err(1, "setting mode failed\n");
|
|
}
|
|
}
|
|
} else if (opt->got_bus) {
|
|
if (opt->got_set_owner) {
|
|
if (libusb20_bus_set_owner(pbe, opt->bus,
|
|
opt->uid, opt->gid)) {
|
|
err(1, "setting owner and group failed\n");
|
|
}
|
|
}
|
|
if (opt->got_set_perm) {
|
|
if (libusb20_bus_set_perm(pbe, opt->bus,
|
|
opt->mode)) {
|
|
err(1, "setting mode failed\n");
|
|
}
|
|
}
|
|
} else {
|
|
if (opt->got_set_owner) {
|
|
if (libusb20_be_set_owner(pbe,
|
|
opt->uid, opt->gid)) {
|
|
err(1, "setting owner and group failed\n");
|
|
}
|
|
}
|
|
if (opt->got_set_perm) {
|
|
if (libusb20_be_set_perm(pbe,
|
|
opt->mode)) {
|
|
err(1, "setting mode failed\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
if (libusb20_dev_open(pdev, 0)) {
|
|
err(1, "could not open device");
|
|
}
|
|
if (opt->got_dump_string) {
|
|
char *pbuf;
|
|
|
|
pbuf = malloc(256);
|
|
if (pbuf == NULL) {
|
|
err(1, "out of memory");
|
|
}
|
|
if (libusb20_dev_req_string_simple_sync(pdev,
|
|
opt->string_index, pbuf, 256)) {
|
|
printf("STRING_0x%02x = <read error>\n",
|
|
opt->string_index);
|
|
} else {
|
|
printf("STRING_0x%02x = <%s>\n",
|
|
opt->string_index, pbuf);
|
|
}
|
|
free(pbuf);
|
|
}
|
|
if (opt->got_do_request) {
|
|
uint16_t actlen;
|
|
uint16_t t;
|
|
|
|
if (libusb20_dev_request_sync(pdev, &opt->setup,
|
|
opt->buffer, &actlen, 5000 /* 5 seconds */ , 0)) {
|
|
printf("REQUEST = <ERROR>\n");
|
|
} else if (!(opt->setup.bmRequestType &
|
|
LIBUSB20_ENDPOINT_IN)) {
|
|
printf("REQUEST = <OK>\n");
|
|
} else {
|
|
t = actlen;
|
|
printf("REQUEST = <");
|
|
for (t = 0; t != actlen; t++) {
|
|
printf("0x%02x%s",
|
|
((uint8_t *)opt->buffer)[t],
|
|
(t == (actlen - 1)) ? "" : " ");
|
|
}
|
|
printf("><");
|
|
for (t = 0; t != actlen; t++) {
|
|
char c;
|
|
|
|
c = ((uint8_t *)opt->buffer)[t];
|
|
if ((c != '<') &&
|
|
(c != '>') && isprint(c)) {
|
|
putchar(c);
|
|
}
|
|
}
|
|
printf(">\n");
|
|
}
|
|
}
|
|
if (opt->got_set_config) {
|
|
if (libusb20_dev_set_config_index(pdev,
|
|
opt->config_index)) {
|
|
err(1, "could not set config index");
|
|
}
|
|
}
|
|
if (opt->got_set_alt) {
|
|
if (libusb20_dev_set_alt_index(pdev, opt->iface,
|
|
opt->alt_index)) {
|
|
err(1, "could not set alternate setting");
|
|
}
|
|
}
|
|
if (opt->got_reset) {
|
|
if (libusb20_dev_reset(pdev)) {
|
|
err(1, "could not reset device");
|
|
}
|
|
}
|
|
if (opt->got_suspend) {
|
|
if (libusb20_dev_set_power_mode(pdev,
|
|
LIBUSB20_POWER_SUSPEND)) {
|
|
err(1, "could not set suspend");
|
|
}
|
|
}
|
|
if (opt->got_resume) {
|
|
if (libusb20_dev_set_power_mode(pdev,
|
|
LIBUSB20_POWER_RESUME)) {
|
|
err(1, "could not set resume");
|
|
}
|
|
}
|
|
if (opt->got_power_off) {
|
|
if (libusb20_dev_set_power_mode(pdev,
|
|
LIBUSB20_POWER_OFF)) {
|
|
err(1, "could not set power OFF");
|
|
}
|
|
}
|
|
if (opt->got_power_save) {
|
|
if (libusb20_dev_set_power_mode(pdev,
|
|
LIBUSB20_POWER_SAVE)) {
|
|
err(1, "could not set power SAVE");
|
|
}
|
|
}
|
|
if (opt->got_power_on) {
|
|
if (libusb20_dev_set_power_mode(pdev,
|
|
LIBUSB20_POWER_ON)) {
|
|
err(1, "could not set power ON");
|
|
}
|
|
}
|
|
dump_any =
|
|
(opt->got_dump_device_desc ||
|
|
opt->got_dump_curr_config ||
|
|
opt->got_dump_all_config ||
|
|
opt->got_dump_info ||
|
|
opt->got_dump_access);
|
|
|
|
if (opt->got_list || dump_any) {
|
|
dump_device_info(pdev);
|
|
}
|
|
if (opt->got_dump_access) {
|
|
printf("\n");
|
|
dump_device_access(pdev, opt->got_iface ?
|
|
opt->iface : 0xFF);
|
|
}
|
|
if (opt->got_dump_device_desc) {
|
|
printf("\n");
|
|
dump_device_desc(pdev);
|
|
}
|
|
if (opt->got_dump_all_config) {
|
|
printf("\n");
|
|
dump_config(pdev, 1);
|
|
} else if (opt->got_dump_curr_config) {
|
|
printf("\n");
|
|
dump_config(pdev, 0);
|
|
}
|
|
if (dump_any) {
|
|
printf("\n");
|
|
}
|
|
if (libusb20_dev_close(pdev)) {
|
|
err(1, "could not close device");
|
|
}
|
|
}
|
|
|
|
if (matches == 0) {
|
|
printf("No device match\n");
|
|
}
|
|
done:
|
|
reset_options(opt);
|
|
|
|
return;
|
|
}
|
|
|
|
int
|
|
main(int argc, char **argv)
|
|
{
|
|
struct libusb20_backend *pbe;
|
|
struct options *opt = &options;
|
|
char *cp;
|
|
int n;
|
|
int t;
|
|
|
|
if (argc < 1) {
|
|
usage();
|
|
}
|
|
pbe = libusb20_be_alloc_default();
|
|
if (pbe == NULL)
|
|
err(1, "could not access USB backend\n");
|
|
|
|
for (n = 1; n != argc; n++) {
|
|
|
|
/* get number of additional options */
|
|
t = (argc - n - 1);
|
|
if (t > 255)
|
|
t = 255;
|
|
switch (get_token(argv[n], t)) {
|
|
case T_ADD_DEVICE_QUIRK:
|
|
if (opt->got_add_device_quirk) {
|
|
flush_command(pbe, opt);
|
|
}
|
|
opt->vid = num_id(argv[n + 1], "Vendor ID");
|
|
opt->pid = num_id(argv[n + 2], "Product ID");
|
|
opt->lo_rev = num_id(argv[n + 3], "Low Revision");
|
|
opt->hi_rev = num_id(argv[n + 4], "High Revision");
|
|
opt->quirkname = argv[n + 5];
|
|
n += 5;
|
|
|
|
opt->got_add_device_quirk = 1;
|
|
opt->got_any++;
|
|
break;
|
|
|
|
case T_REMOVE_DEVICE_QUIRK:
|
|
if (opt->got_remove_device_quirk) {
|
|
flush_command(pbe, opt);
|
|
}
|
|
opt->vid = num_id(argv[n + 1], "Vendor ID");
|
|
opt->pid = num_id(argv[n + 2], "Product ID");
|
|
opt->lo_rev = num_id(argv[n + 3], "Low Revision");
|
|
opt->hi_rev = num_id(argv[n + 4], "High Revision");
|
|
opt->quirkname = argv[n + 5];
|
|
n += 5;
|
|
opt->got_remove_device_quirk = 1;
|
|
opt->got_any++;
|
|
break;
|
|
|
|
case T_DUMP_QUIRK_NAMES:
|
|
opt->got_dump_quirk_names = 1;
|
|
opt->got_any++;
|
|
break;
|
|
|
|
case T_DUMP_DEVICE_QUIRKS:
|
|
opt->got_dump_device_quirks = 1;
|
|
opt->got_any++;
|
|
break;
|
|
|
|
case T_UNIT:
|
|
if (opt->got_any) {
|
|
/* allow multiple commands on the same line */
|
|
flush_command(pbe, opt);
|
|
}
|
|
opt->bus = num_id(argv[n + 1], "busnum");
|
|
opt->got_bus = 1;
|
|
n++;
|
|
break;
|
|
case T_ADDR:
|
|
opt->addr = num_id(argv[n + 1], "addr");
|
|
opt->got_addr = 1;
|
|
n++;
|
|
break;
|
|
case T_IFACE:
|
|
opt->iface = num_id(argv[n + 1], "iface");
|
|
opt->got_iface = 1;
|
|
n++;
|
|
break;
|
|
case T_SET_CONFIG:
|
|
opt->config_index = num_id(argv[n + 1], "cfg_index");
|
|
opt->got_set_config = 1;
|
|
opt->got_any++;
|
|
n++;
|
|
break;
|
|
case T_SET_ALT:
|
|
opt->alt_index = num_id(argv[n + 1], "cfg_index");
|
|
opt->got_set_alt = 1;
|
|
opt->got_any++;
|
|
n++;
|
|
break;
|
|
case T_SET_OWNER:
|
|
cp = argv[n + 1];
|
|
cp = strchr(cp, ':');
|
|
if (cp == NULL) {
|
|
err(1, "missing colon in '%s'!", argv[n + 1]);
|
|
}
|
|
*(cp++) = '\0';
|
|
opt->gid = a_gid(cp);
|
|
opt->uid = a_uid(argv[n + 1]);
|
|
opt->got_set_owner = 1;
|
|
opt->got_any++;
|
|
n++;
|
|
break;
|
|
case T_SET_PERM:
|
|
opt->mode = a_mode(argv[n + 1]);
|
|
opt->got_set_perm = 1;
|
|
opt->got_any++;
|
|
n++;
|
|
break;
|
|
case T_DUMP_DEVICE_DESC:
|
|
opt->got_dump_device_desc = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_DUMP_CURR_CONFIG_DESC:
|
|
opt->got_dump_curr_config = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_DUMP_ALL_CONFIG_DESC:
|
|
opt->got_dump_all_config = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_DUMP_INFO:
|
|
opt->got_dump_info = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_DUMP_STRING:
|
|
if (opt->got_dump_string) {
|
|
flush_command(pbe, opt);
|
|
}
|
|
opt->string_index = num_id(argv[n + 1], "str_index");
|
|
opt->got_dump_string = 1;
|
|
opt->got_any++;
|
|
n++;
|
|
break;
|
|
case T_DUMP_ACCESS:
|
|
opt->got_dump_access = 1;
|
|
opt->got_any += 2;
|
|
break;
|
|
case T_SUSPEND:
|
|
opt->got_suspend = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_RESUME:
|
|
opt->got_resume = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_POWER_OFF:
|
|
opt->got_power_off = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_POWER_SAVE:
|
|
opt->got_power_save = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_POWER_ON:
|
|
opt->got_power_on = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_RESET:
|
|
opt->got_reset = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_LIST:
|
|
opt->got_list = 1;
|
|
opt->got_any++;
|
|
break;
|
|
case T_DO_REQUEST:
|
|
if (opt->got_do_request) {
|
|
flush_command(pbe, opt);
|
|
}
|
|
LIBUSB20_INIT(LIBUSB20_CONTROL_SETUP, &opt->setup);
|
|
opt->setup.bmRequestType = num_id(argv[n + 1], "bmReqTyp");
|
|
opt->setup.bRequest = num_id(argv[n + 2], "bReq");
|
|
opt->setup.wValue = num_id(argv[n + 3], "wVal");
|
|
opt->setup.wIndex = num_id(argv[n + 4], "wIndex");
|
|
opt->setup.wLength = num_id(argv[n + 5], "wLen");
|
|
if (opt->setup.wLength != 0) {
|
|
opt->buffer = malloc(opt->setup.wLength);
|
|
} else {
|
|
opt->buffer = NULL;
|
|
}
|
|
|
|
n += 5;
|
|
|
|
if (!(opt->setup.bmRequestType &
|
|
LIBUSB20_ENDPOINT_IN)) {
|
|
/* copy in data */
|
|
t = (argc - n - 1);
|
|
if (t < opt->setup.wLength) {
|
|
err(1, "request data missing");
|
|
}
|
|
t = opt->setup.wLength;
|
|
while (t--) {
|
|
((uint8_t *)opt->buffer)[t] =
|
|
num_id(argv[n + t + 1], "req_data");
|
|
}
|
|
n += opt->setup.wLength;
|
|
}
|
|
opt->got_do_request = 1;
|
|
opt->got_any++;
|
|
break;
|
|
default:
|
|
usage();
|
|
break;
|
|
}
|
|
}
|
|
if (opt->got_any) {
|
|
/* flush out last command */
|
|
flush_command(pbe, opt);
|
|
} else {
|
|
/* list all the devices */
|
|
opt->got_list = 1;
|
|
opt->got_any++;
|
|
flush_command(pbe, opt);
|
|
}
|
|
/* release data */
|
|
libusb20_be_free(pbe);
|
|
|
|
return (0);
|
|
}
|