241 lines
10 KiB
C
241 lines
10 KiB
C
/*
|
|
* Copyright (c) 2001 M. Warner Losh. All rights reserved.
|
|
* Copyright (c) 1997 Ted Faber. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Absolutely no warranty of function or purpose is made by the author
|
|
* Ted Faber.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* Share the devid database with NEWCARD */
|
|
#include <dev/pccbb/pccbbdevid.h>
|
|
|
|
/* CL-PD683x CardBus defines */
|
|
#define CLPD6833_CFG_MISC_1 0x98
|
|
|
|
/* Configuration constants */
|
|
#define CLPD6832_BCR_MGMT_IRQ_ENA 0x0800
|
|
#define CLPD6833_CM1_MGMT_EXCA_ENA 0x0001 /* Set ExCA, Clr PCI */
|
|
|
|
/* End of CL-PD6832 defines */
|
|
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
|
#define TI113X_PCI_SYSTEM_CONTROL 0x80 /* System Control */
|
|
#define TI12XX_PCI_MULTIMEDIA_CONTROL 0x84 /* Zoom Video */
|
|
#define TI113X_PCI_RETRY_STATUS 0x90 /* Retry Status */
|
|
#define TI113X_PCI_CARD_CONTROL 0x91 /* Card Control */
|
|
#define TI113X_PCI_DEVICE_CONTROL 0x92 /* Device Control */
|
|
#define TI113X_PCI_BUFFER_CONTROL 0x93 /* Buffer Control */
|
|
#define TI12XX_PCI_DIAGNOSTIC 0x93 /* Diagnostic register */
|
|
#define TI113X_PCI_SOCKET_DMA0 0x94 /* Socket DMA Register 0 */
|
|
#define TI113X_PCI_SOCKET_DMA1 0x98 /* Socket DMA Register 1 */
|
|
|
|
/* Card control register (TI113X_SYSTEM_CONTROL == 0x80) */
|
|
#define TI113X_SYSCNTL_INTRTIE 0x20000000u
|
|
#define TI113X_SYSCNTL_SMIENB 0x00800000u
|
|
#define TI113X_SYSCNTL_VCC_PROTECT 0x00200000u
|
|
#define TI113X_SYSCNTL_CLKRUN_SEL 0x00000080u
|
|
#define TI113X_SYSCNTL_PWRSAVINGS 0x00000040u
|
|
#define TI113X_SYSCNTL_KEEP_CLK 0x00000002u
|
|
#define TI113X_SYSCNTL_CLKRUN_ENA 0x00000001u
|
|
|
|
/* Card control register (TI113X_CARD_CONTROL == 0x91) */
|
|
#define TI113X_CARDCNTL_RING_ENA 0x80u
|
|
#define TI113X_CARDCNTL_ZOOM_VIDEO 0x40u
|
|
#define TI113X_CARDCNTL_PCI_IRQ_ENA 0x20u
|
|
#define TI113X_CARDCNTL_PCI_IREQ 0x10u
|
|
#define TI113X_CARDCNTL_PCI_CSC 0x08u
|
|
#define TI113X_CARDCNTL_MASK (TI113X_CARDCNTL_PCI_IRQ_ENA | TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
|
#define TI113X_FUNC0_VALID TI113X_CARDCNTL_MASK
|
|
#define TI113X_FUNC1_VALID (TI113X_CARDCNTL_PCI_IREQ | TI113X_CARDCNTL_PCI_CSC)
|
|
/* Reserved bit 0x04u */
|
|
#define TI113X_CARDCNTL_SPKR_ENA 0x02u
|
|
#define TI113X_CARDCNTL_INT 0x01u
|
|
|
|
/* Device control register (TI113X_DEVICE_CONTROL == 0x92) */
|
|
#define TI113X_DEVCNTL_5V_SOCKET 0x40u
|
|
#define TI113X_DEVCNTL_3V_SOCKET 0x20u
|
|
#define TI113X_DEVCNTL_INTR_MASK 0x06u
|
|
#define TI113X_DEVCNTL_INTR_NONE 0x00u
|
|
#define TI113X_DEVCNTL_INTR_ISA 0x02u
|
|
#define TI113X_DEVCNTL_INTR_SERIAL 0x04u
|
|
/* TI12XX specific code */
|
|
#define TI12XX_DEVCNTL_INTR_ALLSERIAL 0x06u
|
|
|
|
/* Diagnostic register (misnamed) TI12XX_PCI_DIAGNOSTIC == 0x93 */
|
|
#define TI12XX_DIAG_CSC_INTR 0x20 /* see datasheet */
|
|
|
|
/* Texas Instruments PCI-1130/1131 CardBus Controller */
|
|
#define TI113X_ExCA_IO_OFFSET0 0x36 /* Offset of I/O window */
|
|
#define TI113X_ExCA_IO_OFFSET1 0x38 /* Offset of I/O window */
|
|
#define TI113X_ExCA_MEM_WINDOW_PAGE 0x3C /* Memory Window Page */
|
|
|
|
/*
|
|
* Ricoh R5C47[5678] parts have these registers. Maybe the 46x also use
|
|
* them, but I can't find out for sure without datasheets...
|
|
*/
|
|
#define R5C47X_MISC_CONTROL_REGISTER_2 0xa0
|
|
#define R5C47X_MCR2_CSC_TO_INTX_DISABLE 0x0010 /* Bit 7 */
|
|
|
|
/*
|
|
* Special resister definition for Toshiba ToPIC95/97
|
|
* These values are borrowed from pcmcia-cs/Linux.
|
|
*/
|
|
#define TOPIC_SOCKET_CTRL 0x90
|
|
# define TOPIC_SOCKET_CTRL_SCR_IRQSEL 0x00000001 /* PCI intr */
|
|
|
|
#define TOPIC_SLOT_CTRL 0xa0
|
|
# define TOPIC_SLOT_CTRL_SLOTON 0x00000080
|
|
# define TOPIC_SLOT_CTRL_SLOTEN 0x00000040
|
|
# define TOPIC_SLOT_CTRL_ID_LOCK 0x00000020
|
|
# define TOPIC_SLOT_CTRL_ID_WP 0x00000010
|
|
# define TOPIC_SLOT_CTRL_PORT_MASK 0x0000000c
|
|
# define TOPIC_SLOT_CTRL_PORT_SHIFT 2
|
|
# define TOPIC_SLOT_CTRL_OSF_MASK 0x00000003
|
|
# define TOPIC_SLOT_CTRL_OSF_SHIFT 0
|
|
|
|
# define TOPIC_SLOT_CTRL_INTB 0x00002000
|
|
# define TOPIC_SLOT_CTRL_INTA 0x00001000
|
|
# define TOPIC_SLOT_CTRL_INT_MASK 0x00003000
|
|
# define TOPIC_SLOT_CTRL_CLOCK_MASK 0x00000c00
|
|
# define TOPIC_SLOT_CTRL_CLOCK_2 0x00000800 /* PCI Clock/2 */
|
|
# define TOPIC_SLOT_CTRL_CLOCK_1 0x00000400 /* PCI Clock */
|
|
# define TOPIC_SLOT_CTRL_CLOCK_0 0x00000000 /* no clock */
|
|
# define TOPIC97_SLOT_CTRL_STSIRQP 0x00000400 /* status change intr pulse */
|
|
# define TOPIC97_SLOT_CTRL_IRQP 0x00000200 /* function intr pulse */
|
|
# define TOPIC97_SLOT_CTRL_PCIINT 0x00000100 /* intr routing to PCI INT */
|
|
|
|
# define TOPIC_SLOT_CTRL_CARDBUS 0x80000000
|
|
# define TOPIC_SLOT_CTRL_VS1 0x04000000
|
|
# define TOPIC_SLOT_CTRL_VS2 0x02000000
|
|
# define TOPIC_SLOT_CTRL_SWDETECT 0x01000000
|
|
|
|
#define TOPIC_REG_CTRL 0x00a4
|
|
# define TOPIC_REG_CTRL_RESUME_RESET 0x80000000
|
|
# define TOPIC_REG_CTRL_REMOVE_RESET 0x40000000
|
|
# define TOPIC97_REG_CTRL_CLKRUN_ENA 0x20000000
|
|
# define TOPIC97_REG_CTRL_TESTMODE 0x10000000
|
|
# define TOPIC97_REG_CTRL_IOPLUP 0x08000000
|
|
# define TOPIC_REG_CTRL_BUFOFF_PWROFF 0x02000000
|
|
# define TOPIC_REG_CTRL_BUFOFF_SIGOFF 0x01000000
|
|
# define TOPIC97_REG_CTRL_CB_DEV_MASK 0x0000f800
|
|
# define TOPIC97_REG_CTRL_CB_DEV_SHIFT 11
|
|
# define TOPIC97_REG_CTRL_RI_DISABLE 0x00000004
|
|
# define TOPIC97_REG_CTRL_CAUDIO_OFF 0x00000002
|
|
# define TOPIC_REG_CTRL_CAUDIO_INVERT 0x00000001
|
|
|
|
/* For Bridge Control register (CB_PCI_BRIDGE_CTRL) */
|
|
#define CB_BCR_MASTER_ABORT 0x0020
|
|
#define CB_BCR_CB_RESET 0x0040
|
|
#define CB_BCR_INT_EXCA 0x0080
|
|
#define CB_BCR_WRITE_POST_EN 0x0400
|
|
/* additional bits for Ricoh's cardbus products */
|
|
#define CB_BCR_RL_3E0_EN 0x0800
|
|
#define CB_BCR_RL_3E2_EN 0x1000
|
|
|
|
/* PCI Configuration Registers (common) */
|
|
#define CB_PCI_VENDOR_ID 0x00 /* vendor ID */
|
|
#define CB_PCI_DEVICE_ID 0x02 /* device ID */
|
|
#define CB_PCI_COMMAND 0x04 /* PCI command */
|
|
#define CB_PCI_STATUS 0x06 /* PCI status */
|
|
#define CB_PCI_REVISION_ID 0x08 /* PCI revision ID */
|
|
#define CB_PCI_CLASS 0x09 /* PCI class code */
|
|
#define CB_PCI_CACHE_LINE_SIZE 0x0c /* Cache line size */
|
|
#define CB_PCI_LATENCY 0x0d /* PCI latency timer */
|
|
#define CB_PCI_HEADER_TYPE 0x0e /* PCI header type */
|
|
#define CB_PCI_BIST 0x0f /* Built-in self test */
|
|
#define CB_PCI_SOCKET_BASE 0x10 /* Socket/ExCA base address reg. */
|
|
#define CB_PCI_CB_STATUS 0x16 /* CardBus Status */
|
|
#define CB_PCI_PCI_BUS_NUM 0x18 /* PCI bus number */
|
|
#define CB_PCI_CB_BUS_NUM 0x19 /* CardBus bus number */
|
|
#define CB_PCI_CB_SUB_BUS_NUM 0x1A /* Subordinate CardBus bus number */
|
|
#define CB_PCI_CB_LATENCY 0x1A /* CardBus latency timer */
|
|
#define CB_PCI_MEMBASE0 0x1C /* Memory base register 0 */
|
|
#define CB_PCI_MEMLIMIT0 0x20 /* Memory limit register 0 */
|
|
#define CB_PCI_MEMBASE1 0x24 /* Memory base register 1 */
|
|
#define CB_PCI_MEMLIMIT1 0x28 /* Memory limit register 1 */
|
|
#define CB_PCI_IOBASE0 0x2C /* I/O base register 0 */
|
|
#define CB_PCI_IOLIMIT0 0x30 /* I/O limit register 0 */
|
|
#define CB_PCI_IOBASE1 0x34 /* I/O base register 1 */
|
|
#define CB_PCI_IOLIMIT1 0x38 /* I/O limit register 1 */
|
|
#define CB_PCI_INT_LINE 0x3C /* Interrupt Line */
|
|
#define CB_PCI_INT_PIN 0x3D /* Interrupt Pin */
|
|
#define CB_PCI_BRIDGE_CTRL 0x3E /* Bridge Control */
|
|
#define CB_PCI_SUBSYS_VENDOR_ID 0x40 /* Subsystem Vendor ID */
|
|
#define CB_PCI_SUBSYS_ID 0x42 /* Subsystem ID */
|
|
#define CB_PCI_LEGACY16_IOADDR 0x44 /* Legacy 16bit I/O address */
|
|
#define CB_PCI_LEGACY16_IOENABLE 0x01 /* Enable Legacy 16bit I/O address */
|
|
|
|
/* PCI Memory register offsets for YENTA devices */
|
|
#define CB_SOCKET_EVENT 0x00
|
|
#define CB_SOCKET_MASK 0x04
|
|
#define CB_SOCKET_STATE 0x08
|
|
#define CB_SOCKET_FORCE 0x0c
|
|
#define CB_SOCKET_POWER 0x10
|
|
#define CB_EXCA_OFFSET 0x800 /* Offset for ExCA registers */
|
|
|
|
#define CB_SE_CD 0x6 /* Socket Event Card detect */
|
|
#define CB_SE_POWER 0x8
|
|
|
|
#define CB_SM_CD 0x6 /* Socket MASK Card detect */
|
|
#define CB_SM_POWER 0x8
|
|
|
|
#define CB_SS_CARDSTS 0x00000001 /* Card Status Change */
|
|
#define CB_SS_CD1 0x00000002 /* Card Detect 1 */
|
|
#define CB_SS_CD2 0x00000004 /* Card Detect 2 */
|
|
#define CB_SS_CD 0x00000006 /* Card Detect all */
|
|
#define CB_SS_PWRCYCLE 0x00000008 /* Power Cycle */
|
|
#define CB_SS_16BIT 0x00000010 /* 16-bit Card */
|
|
#define CB_SS_CB 0x00000020 /* Cardbus Card */
|
|
#define CB_SS_IREQ 0x00000040 /* Ready */
|
|
#define CB_SS_NOTCARD 0x00000080 /* Unrecognized Card */
|
|
#define CB_SS_DATALOST 0x00000100 /* Data Lost */
|
|
#define CB_SS_BADVCC 0x00000200 /* Bad VccRequest */
|
|
#define CB_SS_5VCARD 0x00000400 /* 5 V Card */
|
|
#define CB_SS_3VCARD 0x00000800 /* 3.3 V Card */
|
|
#define CB_SS_XVCARD 0x00001000 /* X.X V Card */
|
|
#define CB_SS_YVCARD 0x00002000 /* Y.Y V Card */
|
|
#define CB_SS_5VSOCK 0x10000000 /* 5 V Socket */
|
|
#define CB_SS_3VSOCK 0x20000000 /* 3.3 V Socket */
|
|
#define CB_SS_XVSOCK 0x40000000 /* X.X V Socket */
|
|
#define CB_SS_YVSOCK 0x80000000 /* Y.Y V Socket */
|
|
|
|
#define CB_SP_CLKSTOP 0x80 /* Cardbus clock stop protocol */
|
|
#define CB_SP_VCC_MASK 0x70
|
|
#define CB_SP_VCC_0V 0x00
|
|
/* 0x10 is reserved 12V in VPP */
|
|
#define CB_SP_VCC_5V 0x20
|
|
#define CB_SP_VCC_3V 0x30
|
|
#define CB_SP_VCC_XV 0x40
|
|
#define CB_SP_VCC_YV 0x50
|
|
/* 0x60 and 0x70 are reserved */
|
|
#define CB_SP_VPP_MASK 0x07
|
|
#define CB_SP_VPP_0V 0x00
|
|
#define CB_SP_VPP_12V 0x01
|
|
#define CB_SP_VPP_5V 0x02
|
|
#define CB_SP_VPP_3V 0x03
|
|
#define CB_SP_VPP_XV 0x04
|
|
#define CB_SP_VPP_YV 0x05
|
|
/* 0x6 and 0x7 are reserved */
|