d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
82ed3cb0e4
freebsd-skq/sys/dev/cxgbe
History
Navdeep Parhar dd991bd5a1 cxgbe(4): Update T5 and T4 firmwares to 1.15.28.0. 
These firmwares were obtained from the beta "Chelsio T5/T4 Unified Wire
v2.12.0.2 for Linux" release.  Changes since last release are listed in the
"Release Notes" accompanying the beta release and are copy-pasted here as well.

The plan is to have only GA'd firmwares in any -STABLE FreeBSD branch so I'll
MFC this (after 2 months) only if it ends up in a GA release.

================================================================================
================================================================================

22.1. T5 Firmware
+++++++++++++++++++++++++++++++++

Version : 1.15.28.0
Date    : 02/29/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
   queue was ignored.
 - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
 - Fixed an issue in watchdog which was causing VM bring-up failure after
   reboot.
 - Fixed 40G link failures with some switches when auto-negotiation enabled.
 - Fixed to improve on link bring-up time.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where bogus d3hot bits were set causing traffic stall.
 - Fixed an issue where sometimes adapter was not seen after reboot.
 - Fixed an issue where iWARP was crashing in conjunction with traffic
   management.
 - Fixed an issue where link failed to come up after removing twinax cable and
   inserting optical module.

OFLD
 - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.

FOiSCSI
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
   use given inerface.

ENHANCEMENTS
------------

BASE:
 - Added new interface to program DCA settings in SGE contexts; allow 32-byte
   IQE size
 - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.

OFLD:
 - WR opcode is returned to host in cqe error response.

================================================================================
================================================================================

22.2. T4 Firmware
+++++++++++++++++

Version : 1.15.28.0
Date    : 02/29/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
   was ignored.
 - Fixed an issue in watchdog which was causing VM bring-up failure after
   reboot.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where iWARP was crashing in conjunction with traffic
   management.

FOiSCSI:
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
   use given inerface.

ENHANCEMENTS
------------

BASE:
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.

================================================================================

Obtained from:	Chelsio Communications
MFC after:	2 months
Sponsored by:	Chelsio Communications
2016-03-01 02:36:50 +00:00
..
common cxgbe(4): Update T5 and T4 firmwares to 1.15.28.0. 2016-03-01 02:36:50 +00:00
cxgbei cxgbei: Hardware accelerated iSCSI target and initiator for TOE capable 2015-12-26 06:05:21 +00:00
firmware cxgbe(4): Update T5 and T4 firmwares to 1.15.28.0. 2016-03-01 02:36:50 +00:00
iw_cxgbe Fix for iWARP servers that listen on INADDR_ANY. 2016-01-22 23:33:34 +00:00
tom cxgbe: catch up with the latest hardware-related definitions. 2016-02-19 00:29:16 +00:00
adapter.h cxgbe(4): Add a sysctl to retrieve the maximum speed/bandwidth supported by a 2016-02-25 01:10:56 +00:00
if_cxl.c cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as 2015-02-06 01:10:04 +00:00
offload.h cxgbe(4): Updates to the base NIC driver and t4_tom to support the iSCSI 2015-12-26 00:26:02 +00:00
osdep.h Add hooks in base cxgbe(4) for the iWARP upper-layer driver. Update a 2013-08-28 20:45:45 +00:00
t4_ioctl.h cxgbe(4): T4_SET_SCHED_CLASS and T4_SET_SCHED_QUEUE ioctls to program 2013-12-03 18:34:52 +00:00
t4_l2t.c Revert r279934, r279938; this is going to be fixed in sbuf instead. 2015-03-14 13:04:39 +00:00
t4_l2t.h
t4_main.c cxgbe(4): Add a sysctl to retrieve the maximum speed/bandwidth supported by a 2016-02-25 01:10:56 +00:00
t4_mp_ring.c Allow cxgbe(4) to be built on i386. Driver attach will succeed only on a subset 2015-01-16 01:32:40 +00:00
t4_mp_ring.h cxgbe(4): major tx rework. 2014-12-31 23:19:16 +00:00
t4_netmap.c Add support for configuring additional virtual interfaces (VIs) on a port. 2015-12-03 00:02:01 +00:00
t4_sge.c Garbage collect unused arguments of m_init(). 2016-02-10 18:54:18 +00:00
t4_tracer.c cxgbe(4): Remove stray if_up from the code that creates the tracing ifnet. 2014-05-23 01:45:44 +00:00