8424d74020
net80211 wireless stack. This work is based on the March 2009 D3.0 draft standard. This standard is expected to become final next year. This includes two main net80211 modules, ieee80211_mesh.c which deals with peer link management, link metric calculation, routing table control and mesh configuration and ieee80211_hwmp.c which deals with the actually routing process on the mesh network. HWMP is the mandatory routing protocol on by the mesh standard, but others, such as RA-OLSR, can be implemented. Authentication and encryption are not implemented. There are several scripts under tools/tools/net80211/scripts that can be used to test different mesh network topologies and they also teach you how to setup a mesh vap (for the impatient: ifconfig wlan0 create wlandev ... wlanmode mesh). A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled by default on GENERIC kernels for i386, amd64, sparc64 and pc98. Drivers that support mesh networks right now are: ath, ral and mwl. More information at: http://wiki.freebsd.org/WifiMesh Please note that this work is experimental. Also, please note that bridging a mesh vap with another network interface is not yet supported. Many thanks to the FreeBSD Foundation for sponsoring this project and to Sam Leffler for his support. Also, I would like to thank Gateworks Corporation for sending me a Cambria board which was used during the development of this project. Reviewed by: sam Approved by: re (kensmith) Obtained from: projects/mesh11s
5272 lines
135 KiB
C
5272 lines
135 KiB
C
/*
|
|
* Copyright 2001 The Aerospace Corporation. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of The Aerospace Corporation may not be used to endorse or
|
|
* promote products derived from this software.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AEROSPACE CORPORATION ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AEROSPACE CORPORATION BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1997, 1998, 2000 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/time.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_media.h>
|
|
#include <net/route.h>
|
|
|
|
#include <net80211/ieee80211_ioctl.h>
|
|
#include <net80211/ieee80211_freebsd.h>
|
|
#include <net80211/ieee80211_superg.h>
|
|
#include <net80211/ieee80211_tdma.h>
|
|
#include <net80211/ieee80211_mesh.h>
|
|
|
|
#include <assert.h>
|
|
#include <ctype.h>
|
|
#include <err.h>
|
|
#include <errno.h>
|
|
#include <fcntl.h>
|
|
#include <inttypes.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <unistd.h>
|
|
#include <stdarg.h>
|
|
#include <stddef.h> /* NB: for offsetof */
|
|
|
|
#include "ifconfig.h"
|
|
#include "regdomain.h"
|
|
|
|
#ifndef IEEE80211_FIXED_RATE_NONE
|
|
#define IEEE80211_FIXED_RATE_NONE 0xff
|
|
#endif
|
|
|
|
/* XXX need these publicly defined or similar */
|
|
#ifndef IEEE80211_NODE_AUTH
|
|
#define IEEE80211_NODE_AUTH 0x000001 /* authorized for data */
|
|
#define IEEE80211_NODE_QOS 0x000002 /* QoS enabled */
|
|
#define IEEE80211_NODE_ERP 0x000004 /* ERP enabled */
|
|
#define IEEE80211_NODE_PWR_MGT 0x000010 /* power save mode enabled */
|
|
#define IEEE80211_NODE_AREF 0x000020 /* authentication ref held */
|
|
#define IEEE80211_NODE_HT 0x000040 /* HT enabled */
|
|
#define IEEE80211_NODE_HTCOMPAT 0x000080 /* HT setup w/ vendor OUI's */
|
|
#define IEEE80211_NODE_WPS 0x000100 /* WPS association */
|
|
#define IEEE80211_NODE_TSN 0x000200 /* TSN association */
|
|
#define IEEE80211_NODE_AMPDU_RX 0x000400 /* AMPDU rx enabled */
|
|
#define IEEE80211_NODE_AMPDU_TX 0x000800 /* AMPDU tx enabled */
|
|
#define IEEE80211_NODE_MIMO_PS 0x001000 /* MIMO power save enabled */
|
|
#define IEEE80211_NODE_MIMO_RTS 0x002000 /* send RTS in MIMO PS */
|
|
#define IEEE80211_NODE_RIFS 0x004000 /* RIFS enabled */
|
|
#define IEEE80211_NODE_SGI20 0x008000 /* Short GI in HT20 enabled */
|
|
#define IEEE80211_NODE_SGI40 0x010000 /* Short GI in HT40 enabled */
|
|
#define IEEE80211_NODE_ASSOCID 0x020000 /* xmit requires associd */
|
|
#define IEEE80211_NODE_AMSDU_RX 0x040000 /* AMSDU rx enabled */
|
|
#define IEEE80211_NODE_AMSDU_TX 0x080000 /* AMSDU tx enabled */
|
|
#endif
|
|
|
|
#define MAXCHAN 1536 /* max 1.5K channels */
|
|
|
|
#define MAXCOL 78
|
|
static int col;
|
|
static char spacer;
|
|
|
|
static void LINE_INIT(char c);
|
|
static void LINE_BREAK(void);
|
|
static void LINE_CHECK(const char *fmt, ...);
|
|
|
|
static const char *modename[IEEE80211_MODE_MAX] = {
|
|
[IEEE80211_MODE_AUTO] = "auto",
|
|
[IEEE80211_MODE_11A] = "11a",
|
|
[IEEE80211_MODE_11B] = "11b",
|
|
[IEEE80211_MODE_11G] = "11g",
|
|
[IEEE80211_MODE_FH] = "fh",
|
|
[IEEE80211_MODE_TURBO_A] = "turboA",
|
|
[IEEE80211_MODE_TURBO_G] = "turboG",
|
|
[IEEE80211_MODE_STURBO_A] = "sturbo",
|
|
[IEEE80211_MODE_11NA] = "11na",
|
|
[IEEE80211_MODE_11NG] = "11ng",
|
|
[IEEE80211_MODE_HALF] = "half",
|
|
[IEEE80211_MODE_QUARTER] = "quarter"
|
|
};
|
|
|
|
static void set80211(int s, int type, int val, int len, void *data);
|
|
static int get80211(int s, int type, void *data, int len);
|
|
static int get80211len(int s, int type, void *data, int len, int *plen);
|
|
static int get80211val(int s, int type, int *val);
|
|
static const char *get_string(const char *val, const char *sep,
|
|
u_int8_t *buf, int *lenp);
|
|
static void print_string(const u_int8_t *buf, int len);
|
|
static void print_regdomain(const struct ieee80211_regdomain *, int);
|
|
static void print_channels(int, const struct ieee80211req_chaninfo *,
|
|
int allchans, int verbose);
|
|
static void regdomain_makechannels(struct ieee80211_regdomain_req *,
|
|
const struct ieee80211_devcaps_req *);
|
|
static const char *mesh_linkstate_string(uint8_t state);
|
|
|
|
static struct ieee80211req_chaninfo *chaninfo;
|
|
static struct ieee80211_regdomain regdomain;
|
|
static int gotregdomain = 0;
|
|
static struct ieee80211_roamparams_req roamparams;
|
|
static int gotroam = 0;
|
|
static struct ieee80211_txparams_req txparams;
|
|
static int gottxparams = 0;
|
|
static struct ieee80211_channel curchan;
|
|
static int gotcurchan = 0;
|
|
static struct ifmediareq *ifmr;
|
|
static int htconf = 0;
|
|
static int gothtconf = 0;
|
|
|
|
static void
|
|
gethtconf(int s)
|
|
{
|
|
if (gothtconf)
|
|
return;
|
|
if (get80211val(s, IEEE80211_IOC_HTCONF, &htconf) < 0)
|
|
warn("unable to get HT configuration information");
|
|
gothtconf = 1;
|
|
}
|
|
|
|
/*
|
|
* Collect channel info from the kernel. We use this (mostly)
|
|
* to handle mapping between frequency and IEEE channel number.
|
|
*/
|
|
static void
|
|
getchaninfo(int s)
|
|
{
|
|
if (chaninfo != NULL)
|
|
return;
|
|
chaninfo = malloc(IEEE80211_CHANINFO_SIZE(MAXCHAN));
|
|
if (chaninfo == NULL)
|
|
errx(1, "no space for channel list");
|
|
if (get80211(s, IEEE80211_IOC_CHANINFO, chaninfo,
|
|
IEEE80211_CHANINFO_SIZE(MAXCHAN)) < 0)
|
|
err(1, "unable to get channel information");
|
|
ifmr = ifmedia_getstate(s);
|
|
gethtconf(s);
|
|
}
|
|
|
|
static struct regdata *
|
|
getregdata(void)
|
|
{
|
|
static struct regdata *rdp = NULL;
|
|
if (rdp == NULL) {
|
|
rdp = lib80211_alloc_regdata();
|
|
if (rdp == NULL)
|
|
errx(-1, "missing or corrupted regdomain database");
|
|
}
|
|
return rdp;
|
|
}
|
|
|
|
/*
|
|
* Given the channel at index i with attributes from,
|
|
* check if there is a channel with attributes to in
|
|
* the channel table. With suitable attributes this
|
|
* allows the caller to look for promotion; e.g. from
|
|
* 11b > 11g.
|
|
*/
|
|
static int
|
|
canpromote(int i, int from, int to)
|
|
{
|
|
const struct ieee80211_channel *fc = &chaninfo->ic_chans[i];
|
|
int j;
|
|
|
|
if ((fc->ic_flags & from) != from)
|
|
return i;
|
|
/* NB: quick check exploiting ordering of chans w/ same frequency */
|
|
if (i+1 < chaninfo->ic_nchans &&
|
|
chaninfo->ic_chans[i+1].ic_freq == fc->ic_freq &&
|
|
(chaninfo->ic_chans[i+1].ic_flags & to) == to)
|
|
return i+1;
|
|
/* brute force search in case channel list is not ordered */
|
|
for (j = 0; j < chaninfo->ic_nchans; j++) {
|
|
const struct ieee80211_channel *tc = &chaninfo->ic_chans[j];
|
|
if (j != i &&
|
|
tc->ic_freq == fc->ic_freq && (tc->ic_flags & to) == to)
|
|
return j;
|
|
}
|
|
return i;
|
|
}
|
|
|
|
/*
|
|
* Handle channel promotion. When a channel is specified with
|
|
* only a frequency we want to promote it to the ``best'' channel
|
|
* available. The channel list has separate entries for 11b, 11g,
|
|
* 11a, and 11n[ga] channels so specifying a frequency w/o any
|
|
* attributes requires we upgrade, e.g. from 11b -> 11g. This
|
|
* gets complicated when the channel is specified on the same
|
|
* command line with a media request that constrains the available
|
|
* channe list (e.g. mode 11a); we want to honor that to avoid
|
|
* confusing behaviour.
|
|
*/
|
|
static int
|
|
promote(int i)
|
|
{
|
|
/*
|
|
* Query the current mode of the interface in case it's
|
|
* constrained (e.g. to 11a). We must do this carefully
|
|
* as there may be a pending ifmedia request in which case
|
|
* asking the kernel will give us the wrong answer. This
|
|
* is an unfortunate side-effect of the way ifconfig is
|
|
* structure for modularity (yech).
|
|
*
|
|
* NB: ifmr is actually setup in getchaninfo (above); we
|
|
* assume it's called coincident with to this call so
|
|
* we have a ``current setting''; otherwise we must pass
|
|
* the socket descriptor down to here so we can make
|
|
* the ifmedia_getstate call ourselves.
|
|
*/
|
|
int chanmode = ifmr != NULL ? IFM_MODE(ifmr->ifm_current) : IFM_AUTO;
|
|
|
|
/* when ambiguous promote to ``best'' */
|
|
/* NB: we abitrarily pick HT40+ over HT40- */
|
|
if (chanmode != IFM_IEEE80211_11B)
|
|
i = canpromote(i, IEEE80211_CHAN_B, IEEE80211_CHAN_G);
|
|
if (chanmode != IFM_IEEE80211_11G && (htconf & 1)) {
|
|
i = canpromote(i, IEEE80211_CHAN_G,
|
|
IEEE80211_CHAN_G | IEEE80211_CHAN_HT20);
|
|
if (htconf & 2) {
|
|
i = canpromote(i, IEEE80211_CHAN_G,
|
|
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40D);
|
|
i = canpromote(i, IEEE80211_CHAN_G,
|
|
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40U);
|
|
}
|
|
}
|
|
if (chanmode != IFM_IEEE80211_11A && (htconf & 1)) {
|
|
i = canpromote(i, IEEE80211_CHAN_A,
|
|
IEEE80211_CHAN_A | IEEE80211_CHAN_HT20);
|
|
if (htconf & 2) {
|
|
i = canpromote(i, IEEE80211_CHAN_A,
|
|
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40D);
|
|
i = canpromote(i, IEEE80211_CHAN_A,
|
|
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40U);
|
|
}
|
|
}
|
|
return i;
|
|
}
|
|
|
|
static void
|
|
mapfreq(struct ieee80211_channel *chan, int freq, int flags)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < chaninfo->ic_nchans; i++) {
|
|
const struct ieee80211_channel *c = &chaninfo->ic_chans[i];
|
|
|
|
if (c->ic_freq == freq && (c->ic_flags & flags) == flags) {
|
|
if (flags == 0) {
|
|
/* when ambiguous promote to ``best'' */
|
|
c = &chaninfo->ic_chans[promote(i)];
|
|
}
|
|
*chan = *c;
|
|
return;
|
|
}
|
|
}
|
|
errx(1, "unknown/undefined frequency %u/0x%x", freq, flags);
|
|
}
|
|
|
|
static void
|
|
mapchan(struct ieee80211_channel *chan, int ieee, int flags)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < chaninfo->ic_nchans; i++) {
|
|
const struct ieee80211_channel *c = &chaninfo->ic_chans[i];
|
|
|
|
if (c->ic_ieee == ieee && (c->ic_flags & flags) == flags) {
|
|
if (flags == 0) {
|
|
/* when ambiguous promote to ``best'' */
|
|
c = &chaninfo->ic_chans[promote(i)];
|
|
}
|
|
*chan = *c;
|
|
return;
|
|
}
|
|
}
|
|
errx(1, "unknown/undefined channel number %d flags 0x%x", ieee, flags);
|
|
}
|
|
|
|
static const struct ieee80211_channel *
|
|
getcurchan(int s)
|
|
{
|
|
if (gotcurchan)
|
|
return &curchan;
|
|
if (get80211(s, IEEE80211_IOC_CURCHAN, &curchan, sizeof(curchan)) < 0) {
|
|
int val;
|
|
/* fall back to legacy ioctl */
|
|
if (get80211val(s, IEEE80211_IOC_CHANNEL, &val) < 0)
|
|
err(-1, "cannot figure out current channel");
|
|
getchaninfo(s);
|
|
mapchan(&curchan, val, 0);
|
|
}
|
|
gotcurchan = 1;
|
|
return &curchan;
|
|
}
|
|
|
|
static enum ieee80211_phymode
|
|
chan2mode(const struct ieee80211_channel *c)
|
|
{
|
|
if (IEEE80211_IS_CHAN_HTA(c))
|
|
return IEEE80211_MODE_11NA;
|
|
if (IEEE80211_IS_CHAN_HTG(c))
|
|
return IEEE80211_MODE_11NG;
|
|
if (IEEE80211_IS_CHAN_108A(c))
|
|
return IEEE80211_MODE_TURBO_A;
|
|
if (IEEE80211_IS_CHAN_108G(c))
|
|
return IEEE80211_MODE_TURBO_G;
|
|
if (IEEE80211_IS_CHAN_ST(c))
|
|
return IEEE80211_MODE_STURBO_A;
|
|
if (IEEE80211_IS_CHAN_FHSS(c))
|
|
return IEEE80211_MODE_FH;
|
|
if (IEEE80211_IS_CHAN_HALF(c))
|
|
return IEEE80211_MODE_HALF;
|
|
if (IEEE80211_IS_CHAN_QUARTER(c))
|
|
return IEEE80211_MODE_QUARTER;
|
|
if (IEEE80211_IS_CHAN_A(c))
|
|
return IEEE80211_MODE_11A;
|
|
if (IEEE80211_IS_CHAN_ANYG(c))
|
|
return IEEE80211_MODE_11G;
|
|
if (IEEE80211_IS_CHAN_B(c))
|
|
return IEEE80211_MODE_11B;
|
|
return IEEE80211_MODE_AUTO;
|
|
}
|
|
|
|
static void
|
|
getroam(int s)
|
|
{
|
|
if (gotroam)
|
|
return;
|
|
if (get80211(s, IEEE80211_IOC_ROAM,
|
|
&roamparams, sizeof(roamparams)) < 0)
|
|
err(1, "unable to get roaming parameters");
|
|
gotroam = 1;
|
|
}
|
|
|
|
static void
|
|
setroam_cb(int s, void *arg)
|
|
{
|
|
struct ieee80211_roamparams_req *roam = arg;
|
|
set80211(s, IEEE80211_IOC_ROAM, 0, sizeof(*roam), roam);
|
|
}
|
|
|
|
static void
|
|
gettxparams(int s)
|
|
{
|
|
if (gottxparams)
|
|
return;
|
|
if (get80211(s, IEEE80211_IOC_TXPARAMS,
|
|
&txparams, sizeof(txparams)) < 0)
|
|
err(1, "unable to get transmit parameters");
|
|
gottxparams = 1;
|
|
}
|
|
|
|
static void
|
|
settxparams_cb(int s, void *arg)
|
|
{
|
|
struct ieee80211_txparams_req *txp = arg;
|
|
set80211(s, IEEE80211_IOC_TXPARAMS, 0, sizeof(*txp), txp);
|
|
}
|
|
|
|
static void
|
|
getregdomain(int s)
|
|
{
|
|
if (gotregdomain)
|
|
return;
|
|
if (get80211(s, IEEE80211_IOC_REGDOMAIN,
|
|
®domain, sizeof(regdomain)) < 0)
|
|
err(1, "unable to get regulatory domain info");
|
|
gotregdomain = 1;
|
|
}
|
|
|
|
static void
|
|
getdevcaps(int s, struct ieee80211_devcaps_req *dc)
|
|
{
|
|
if (get80211(s, IEEE80211_IOC_DEVCAPS, dc,
|
|
IEEE80211_DEVCAPS_SPACE(dc)) < 0)
|
|
err(1, "unable to get device capabilities");
|
|
}
|
|
|
|
static void
|
|
setregdomain_cb(int s, void *arg)
|
|
{
|
|
struct ieee80211_regdomain_req *req;
|
|
struct ieee80211_regdomain *rd = arg;
|
|
struct ieee80211_devcaps_req *dc;
|
|
struct regdata *rdp = getregdata();
|
|
|
|
if (rd->country != NO_COUNTRY) {
|
|
const struct country *cc;
|
|
/*
|
|
* Check current country seting to make sure it's
|
|
* compatible with the new regdomain. If not, then
|
|
* override it with any default country for this
|
|
* SKU. If we cannot arrange a match, then abort.
|
|
*/
|
|
cc = lib80211_country_findbycc(rdp, rd->country);
|
|
if (cc == NULL)
|
|
errx(1, "unknown ISO country code %d", rd->country);
|
|
if (cc->rd->sku != rd->regdomain) {
|
|
const struct regdomain *rp;
|
|
/*
|
|
* Check if country is incompatible with regdomain.
|
|
* To enable multiple regdomains for a country code
|
|
* we permit a mismatch between the regdomain and
|
|
* the country's associated regdomain when the
|
|
* regdomain is setup w/o a default country. For
|
|
* example, US is bound to the FCC regdomain but
|
|
* we allow US to be combined with FCC3 because FCC3
|
|
* has not default country. This allows bogus
|
|
* combinations like FCC3+DK which are resolved when
|
|
* constructing the channel list by deferring to the
|
|
* regdomain to construct the channel list.
|
|
*/
|
|
rp = lib80211_regdomain_findbysku(rdp, rd->regdomain);
|
|
if (rp == NULL)
|
|
errx(1, "country %s (%s) is not usable with "
|
|
"regdomain %d", cc->isoname, cc->name,
|
|
rd->regdomain);
|
|
else if (rp->cc != NULL && rp->cc != cc)
|
|
errx(1, "country %s (%s) is not usable with "
|
|
"regdomain %s", cc->isoname, cc->name,
|
|
rp->name);
|
|
}
|
|
}
|
|
/*
|
|
* Fetch the device capabilities and calculate the
|
|
* full set of netbands for which we request a new
|
|
* channel list be constructed. Once that's done we
|
|
* push the regdomain info + channel list to the kernel.
|
|
*/
|
|
dc = malloc(IEEE80211_DEVCAPS_SIZE(MAXCHAN));
|
|
if (dc == NULL)
|
|
errx(1, "no space for device capabilities");
|
|
dc->dc_chaninfo.ic_nchans = MAXCHAN;
|
|
getdevcaps(s, dc);
|
|
#if 0
|
|
if (verbose) {
|
|
printf("drivercaps: 0x%x\n", dc->dc_drivercaps);
|
|
printf("cryptocaps: 0x%x\n", dc->dc_cryptocaps);
|
|
printf("htcaps : 0x%x\n", dc->dc_htcaps);
|
|
memcpy(chaninfo, &dc->dc_chaninfo,
|
|
IEEE80211_CHANINFO_SPACE(&dc->dc_chaninfo));
|
|
print_channels(s, &dc->dc_chaninfo, 1/*allchans*/, 1/*verbose*/);
|
|
}
|
|
#endif
|
|
req = malloc(IEEE80211_REGDOMAIN_SIZE(dc->dc_chaninfo.ic_nchans));
|
|
if (req == NULL)
|
|
errx(1, "no space for regdomain request");
|
|
req->rd = *rd;
|
|
regdomain_makechannels(req, dc);
|
|
if (verbose) {
|
|
LINE_INIT(':');
|
|
print_regdomain(rd, 1/*verbose*/);
|
|
LINE_BREAK();
|
|
/* blech, reallocate channel list for new data */
|
|
if (chaninfo != NULL)
|
|
free(chaninfo);
|
|
chaninfo = malloc(IEEE80211_CHANINFO_SPACE(&req->chaninfo));
|
|
if (chaninfo == NULL)
|
|
errx(1, "no space for channel list");
|
|
memcpy(chaninfo, &req->chaninfo,
|
|
IEEE80211_CHANINFO_SPACE(&req->chaninfo));
|
|
print_channels(s, &req->chaninfo, 1/*allchans*/, 1/*verbose*/);
|
|
}
|
|
if (req->chaninfo.ic_nchans == 0)
|
|
errx(1, "no channels calculated");
|
|
set80211(s, IEEE80211_IOC_REGDOMAIN, 0,
|
|
IEEE80211_REGDOMAIN_SPACE(req), req);
|
|
free(req);
|
|
free(dc);
|
|
}
|
|
|
|
static int
|
|
ieee80211_mhz2ieee(int freq, int flags)
|
|
{
|
|
struct ieee80211_channel chan;
|
|
mapfreq(&chan, freq, flags);
|
|
return chan.ic_ieee;
|
|
}
|
|
|
|
static int
|
|
isanyarg(const char *arg)
|
|
{
|
|
return (strncmp(arg, "-", 1) == 0 ||
|
|
strncasecmp(arg, "any", 3) == 0 || strncasecmp(arg, "off", 3) == 0);
|
|
}
|
|
|
|
static void
|
|
set80211ssid(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int ssid;
|
|
int len;
|
|
u_int8_t data[IEEE80211_NWID_LEN];
|
|
|
|
ssid = 0;
|
|
len = strlen(val);
|
|
if (len > 2 && isdigit((int)val[0]) && val[1] == ':') {
|
|
ssid = atoi(val)-1;
|
|
val += 2;
|
|
}
|
|
|
|
bzero(data, sizeof(data));
|
|
len = sizeof(data);
|
|
if (get_string(val, NULL, data, &len) == NULL)
|
|
exit(1);
|
|
|
|
set80211(s, IEEE80211_IOC_SSID, ssid, len, data);
|
|
}
|
|
|
|
static void
|
|
set80211meshid(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int len;
|
|
u_int8_t data[IEEE80211_NWID_LEN];
|
|
|
|
memset(data, 0, sizeof(data));
|
|
len = sizeof(data);
|
|
if (get_string(val, NULL, data, &len) == NULL)
|
|
exit(1);
|
|
|
|
set80211(s, IEEE80211_IOC_MESH_ID, 0, len, data);
|
|
}
|
|
|
|
static void
|
|
set80211stationname(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int len;
|
|
u_int8_t data[33];
|
|
|
|
bzero(data, sizeof(data));
|
|
len = sizeof(data);
|
|
get_string(val, NULL, data, &len);
|
|
|
|
set80211(s, IEEE80211_IOC_STATIONNAME, 0, len, data);
|
|
}
|
|
|
|
/*
|
|
* Parse a channel specification for attributes/flags.
|
|
* The syntax is:
|
|
* freq/xx channel width (5,10,20,40,40+,40-)
|
|
* freq:mode channel mode (a,b,g,h,n,t,s,d)
|
|
*
|
|
* These can be combined in either order; e.g. 2437:ng/40.
|
|
* Modes are case insensitive.
|
|
*
|
|
* The result is not validated here; it's assumed to be
|
|
* checked against the channel table fetched from the kernel.
|
|
*/
|
|
static int
|
|
getchannelflags(const char *val, int freq)
|
|
{
|
|
#define _CHAN_HT 0x80000000
|
|
const char *cp;
|
|
int flags;
|
|
|
|
flags = 0;
|
|
|
|
cp = strchr(val, ':');
|
|
if (cp != NULL) {
|
|
for (cp++; isalpha((int) *cp); cp++) {
|
|
/* accept mixed case */
|
|
int c = *cp;
|
|
if (isupper(c))
|
|
c = tolower(c);
|
|
switch (c) {
|
|
case 'a': /* 802.11a */
|
|
flags |= IEEE80211_CHAN_A;
|
|
break;
|
|
case 'b': /* 802.11b */
|
|
flags |= IEEE80211_CHAN_B;
|
|
break;
|
|
case 'g': /* 802.11g */
|
|
flags |= IEEE80211_CHAN_G;
|
|
break;
|
|
case 'h': /* ht = 802.11n */
|
|
case 'n': /* 802.11n */
|
|
flags |= _CHAN_HT; /* NB: private */
|
|
break;
|
|
case 'd': /* dt = Atheros Dynamic Turbo */
|
|
flags |= IEEE80211_CHAN_TURBO;
|
|
break;
|
|
case 't': /* ht, dt, st, t */
|
|
/* dt and unadorned t specify Dynamic Turbo */
|
|
if ((flags & (IEEE80211_CHAN_STURBO|_CHAN_HT)) == 0)
|
|
flags |= IEEE80211_CHAN_TURBO;
|
|
break;
|
|
case 's': /* st = Atheros Static Turbo */
|
|
flags |= IEEE80211_CHAN_STURBO;
|
|
break;
|
|
default:
|
|
errx(-1, "%s: Invalid channel attribute %c\n",
|
|
val, *cp);
|
|
}
|
|
}
|
|
}
|
|
cp = strchr(val, '/');
|
|
if (cp != NULL) {
|
|
char *ep;
|
|
u_long cw = strtoul(cp+1, &ep, 10);
|
|
|
|
switch (cw) {
|
|
case 5:
|
|
flags |= IEEE80211_CHAN_QUARTER;
|
|
break;
|
|
case 10:
|
|
flags |= IEEE80211_CHAN_HALF;
|
|
break;
|
|
case 20:
|
|
/* NB: this may be removed below */
|
|
flags |= IEEE80211_CHAN_HT20;
|
|
break;
|
|
case 40:
|
|
if (ep != NULL && *ep == '+')
|
|
flags |= IEEE80211_CHAN_HT40U;
|
|
else if (ep != NULL && *ep == '-')
|
|
flags |= IEEE80211_CHAN_HT40D;
|
|
break;
|
|
default:
|
|
errx(-1, "%s: Invalid channel width\n", val);
|
|
}
|
|
}
|
|
/*
|
|
* Cleanup specifications.
|
|
*/
|
|
if ((flags & _CHAN_HT) == 0) {
|
|
/*
|
|
* If user specified freq/20 or freq/40 quietly remove
|
|
* HT cw attributes depending on channel use. To give
|
|
* an explicit 20/40 width for an HT channel you must
|
|
* indicate it is an HT channel since all HT channels
|
|
* are also usable for legacy operation; e.g. freq:n/40.
|
|
*/
|
|
flags &= ~IEEE80211_CHAN_HT;
|
|
} else {
|
|
/*
|
|
* Remove private indicator that this is an HT channel
|
|
* and if no explicit channel width has been given
|
|
* provide the default settings.
|
|
*/
|
|
flags &= ~_CHAN_HT;
|
|
if ((flags & IEEE80211_CHAN_HT) == 0) {
|
|
struct ieee80211_channel chan;
|
|
/*
|
|
* Consult the channel list to see if we can use
|
|
* HT40+ or HT40- (if both the map routines choose).
|
|
*/
|
|
if (freq > 255)
|
|
mapfreq(&chan, freq, 0);
|
|
else
|
|
mapchan(&chan, freq, 0);
|
|
flags |= (chan.ic_flags & IEEE80211_CHAN_HT);
|
|
}
|
|
}
|
|
return flags;
|
|
#undef _CHAN_HT
|
|
}
|
|
|
|
static void
|
|
getchannel(int s, struct ieee80211_channel *chan, const char *val)
|
|
{
|
|
int v, flags;
|
|
char *eptr;
|
|
|
|
memset(chan, 0, sizeof(*chan));
|
|
if (isanyarg(val)) {
|
|
chan->ic_freq = IEEE80211_CHAN_ANY;
|
|
return;
|
|
}
|
|
getchaninfo(s);
|
|
errno = 0;
|
|
v = strtol(val, &eptr, 10);
|
|
if (val[0] == '\0' || val == eptr || errno == ERANGE ||
|
|
/* channel may be suffixed with nothing, :flag, or /width */
|
|
(eptr[0] != '\0' && eptr[0] != ':' && eptr[0] != '/'))
|
|
errx(1, "invalid channel specification%s",
|
|
errno == ERANGE ? " (out of range)" : "");
|
|
flags = getchannelflags(val, v);
|
|
if (v > 255) { /* treat as frequency */
|
|
mapfreq(chan, v, flags);
|
|
} else {
|
|
mapchan(chan, v, flags);
|
|
}
|
|
}
|
|
|
|
static void
|
|
set80211channel(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
struct ieee80211_channel chan;
|
|
|
|
getchannel(s, &chan, val);
|
|
set80211(s, IEEE80211_IOC_CURCHAN, 0, sizeof(chan), &chan);
|
|
}
|
|
|
|
static void
|
|
set80211chanswitch(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
struct ieee80211_chanswitch_req csr;
|
|
|
|
getchannel(s, &csr.csa_chan, val);
|
|
csr.csa_mode = 1;
|
|
csr.csa_count = 5;
|
|
set80211(s, IEEE80211_IOC_CHANSWITCH, 0, sizeof(csr), &csr);
|
|
}
|
|
|
|
static void
|
|
set80211authmode(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int mode;
|
|
|
|
if (strcasecmp(val, "none") == 0) {
|
|
mode = IEEE80211_AUTH_NONE;
|
|
} else if (strcasecmp(val, "open") == 0) {
|
|
mode = IEEE80211_AUTH_OPEN;
|
|
} else if (strcasecmp(val, "shared") == 0) {
|
|
mode = IEEE80211_AUTH_SHARED;
|
|
} else if (strcasecmp(val, "8021x") == 0) {
|
|
mode = IEEE80211_AUTH_8021X;
|
|
} else if (strcasecmp(val, "wpa") == 0) {
|
|
mode = IEEE80211_AUTH_WPA;
|
|
} else {
|
|
errx(1, "unknown authmode");
|
|
}
|
|
|
|
set80211(s, IEEE80211_IOC_AUTHMODE, mode, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211powersavemode(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int mode;
|
|
|
|
if (strcasecmp(val, "off") == 0) {
|
|
mode = IEEE80211_POWERSAVE_OFF;
|
|
} else if (strcasecmp(val, "on") == 0) {
|
|
mode = IEEE80211_POWERSAVE_ON;
|
|
} else if (strcasecmp(val, "cam") == 0) {
|
|
mode = IEEE80211_POWERSAVE_CAM;
|
|
} else if (strcasecmp(val, "psp") == 0) {
|
|
mode = IEEE80211_POWERSAVE_PSP;
|
|
} else if (strcasecmp(val, "psp-cam") == 0) {
|
|
mode = IEEE80211_POWERSAVE_PSP_CAM;
|
|
} else {
|
|
errx(1, "unknown powersavemode");
|
|
}
|
|
|
|
set80211(s, IEEE80211_IOC_POWERSAVE, mode, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211powersave(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
if (d == 0)
|
|
set80211(s, IEEE80211_IOC_POWERSAVE, IEEE80211_POWERSAVE_OFF,
|
|
0, NULL);
|
|
else
|
|
set80211(s, IEEE80211_IOC_POWERSAVE, IEEE80211_POWERSAVE_ON,
|
|
0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211powersavesleep(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_POWERSAVESLEEP, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211wepmode(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int mode;
|
|
|
|
if (strcasecmp(val, "off") == 0) {
|
|
mode = IEEE80211_WEP_OFF;
|
|
} else if (strcasecmp(val, "on") == 0) {
|
|
mode = IEEE80211_WEP_ON;
|
|
} else if (strcasecmp(val, "mixed") == 0) {
|
|
mode = IEEE80211_WEP_MIXED;
|
|
} else {
|
|
errx(1, "unknown wep mode");
|
|
}
|
|
|
|
set80211(s, IEEE80211_IOC_WEP, mode, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211wep(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WEP, d, 0, NULL);
|
|
}
|
|
|
|
static int
|
|
isundefarg(const char *arg)
|
|
{
|
|
return (strcmp(arg, "-") == 0 || strncasecmp(arg, "undef", 5) == 0);
|
|
}
|
|
|
|
static void
|
|
set80211weptxkey(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
if (isundefarg(val))
|
|
set80211(s, IEEE80211_IOC_WEPTXKEY, IEEE80211_KEYIX_NONE, 0, NULL);
|
|
else
|
|
set80211(s, IEEE80211_IOC_WEPTXKEY, atoi(val)-1, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211wepkey(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int key = 0;
|
|
int len;
|
|
u_int8_t data[IEEE80211_KEYBUF_SIZE];
|
|
|
|
if (isdigit((int)val[0]) && val[1] == ':') {
|
|
key = atoi(val)-1;
|
|
val += 2;
|
|
}
|
|
|
|
bzero(data, sizeof(data));
|
|
len = sizeof(data);
|
|
get_string(val, NULL, data, &len);
|
|
|
|
set80211(s, IEEE80211_IOC_WEPKEY, key, len, data);
|
|
}
|
|
|
|
/*
|
|
* This function is purely a NetBSD compatability interface. The NetBSD
|
|
* interface is too inflexible, but it's there so we'll support it since
|
|
* it's not all that hard.
|
|
*/
|
|
static void
|
|
set80211nwkey(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int txkey;
|
|
int i, len;
|
|
u_int8_t data[IEEE80211_KEYBUF_SIZE];
|
|
|
|
set80211(s, IEEE80211_IOC_WEP, IEEE80211_WEP_ON, 0, NULL);
|
|
|
|
if (isdigit((int)val[0]) && val[1] == ':') {
|
|
txkey = val[0]-'0'-1;
|
|
val += 2;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
bzero(data, sizeof(data));
|
|
len = sizeof(data);
|
|
val = get_string(val, ",", data, &len);
|
|
if (val == NULL)
|
|
exit(1);
|
|
|
|
set80211(s, IEEE80211_IOC_WEPKEY, i, len, data);
|
|
}
|
|
} else {
|
|
bzero(data, sizeof(data));
|
|
len = sizeof(data);
|
|
get_string(val, NULL, data, &len);
|
|
txkey = 0;
|
|
|
|
set80211(s, IEEE80211_IOC_WEPKEY, 0, len, data);
|
|
|
|
bzero(data, sizeof(data));
|
|
for (i = 1; i < 4; i++)
|
|
set80211(s, IEEE80211_IOC_WEPKEY, i, 0, data);
|
|
}
|
|
|
|
set80211(s, IEEE80211_IOC_WEPTXKEY, txkey, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211rtsthreshold(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_RTSTHRESHOLD,
|
|
isundefarg(val) ? IEEE80211_RTS_MAX : atoi(val), 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211protmode(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int mode;
|
|
|
|
if (strcasecmp(val, "off") == 0) {
|
|
mode = IEEE80211_PROTMODE_OFF;
|
|
} else if (strcasecmp(val, "cts") == 0) {
|
|
mode = IEEE80211_PROTMODE_CTS;
|
|
} else if (strncasecmp(val, "rtscts", 3) == 0) {
|
|
mode = IEEE80211_PROTMODE_RTSCTS;
|
|
} else {
|
|
errx(1, "unknown protection mode");
|
|
}
|
|
|
|
set80211(s, IEEE80211_IOC_PROTMODE, mode, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211htprotmode(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int mode;
|
|
|
|
if (strcasecmp(val, "off") == 0) {
|
|
mode = IEEE80211_PROTMODE_OFF;
|
|
} else if (strncasecmp(val, "rts", 3) == 0) {
|
|
mode = IEEE80211_PROTMODE_RTSCTS;
|
|
} else {
|
|
errx(1, "unknown protection mode");
|
|
}
|
|
|
|
set80211(s, IEEE80211_IOC_HTPROTMODE, mode, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211txpower(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
double v = atof(val);
|
|
int txpow;
|
|
|
|
txpow = (int) (2*v);
|
|
if (txpow != 2*v)
|
|
errx(-1, "invalid tx power (must be .5 dBm units)");
|
|
set80211(s, IEEE80211_IOC_TXPOWER, txpow, 0, NULL);
|
|
}
|
|
|
|
#define IEEE80211_ROAMING_DEVICE 0
|
|
#define IEEE80211_ROAMING_AUTO 1
|
|
#define IEEE80211_ROAMING_MANUAL 2
|
|
|
|
static void
|
|
set80211roaming(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int mode;
|
|
|
|
if (strcasecmp(val, "device") == 0) {
|
|
mode = IEEE80211_ROAMING_DEVICE;
|
|
} else if (strcasecmp(val, "auto") == 0) {
|
|
mode = IEEE80211_ROAMING_AUTO;
|
|
} else if (strcasecmp(val, "manual") == 0) {
|
|
mode = IEEE80211_ROAMING_MANUAL;
|
|
} else {
|
|
errx(1, "unknown roaming mode");
|
|
}
|
|
set80211(s, IEEE80211_IOC_ROAMING, mode, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211wme(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211hidessid(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_HIDESSID, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211apbridge(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_APBRIDGE, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211fastframes(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_FF, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211dturbo(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_TURBOP, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211chanlist(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
struct ieee80211req_chanlist chanlist;
|
|
char *temp, *cp, *tp;
|
|
|
|
temp = malloc(strlen(val) + 1);
|
|
if (temp == NULL)
|
|
errx(1, "malloc failed");
|
|
strcpy(temp, val);
|
|
memset(&chanlist, 0, sizeof(chanlist));
|
|
cp = temp;
|
|
for (;;) {
|
|
int first, last, f, c;
|
|
|
|
tp = strchr(cp, ',');
|
|
if (tp != NULL)
|
|
*tp++ = '\0';
|
|
switch (sscanf(cp, "%u-%u", &first, &last)) {
|
|
case 1:
|
|
if (first > IEEE80211_CHAN_MAX)
|
|
errx(-1, "channel %u out of range, max %u",
|
|
first, IEEE80211_CHAN_MAX);
|
|
setbit(chanlist.ic_channels, first);
|
|
break;
|
|
case 2:
|
|
if (first > IEEE80211_CHAN_MAX)
|
|
errx(-1, "channel %u out of range, max %u",
|
|
first, IEEE80211_CHAN_MAX);
|
|
if (last > IEEE80211_CHAN_MAX)
|
|
errx(-1, "channel %u out of range, max %u",
|
|
last, IEEE80211_CHAN_MAX);
|
|
if (first > last)
|
|
errx(-1, "void channel range, %u > %u",
|
|
first, last);
|
|
for (f = first; f <= last; f++)
|
|
setbit(chanlist.ic_channels, f);
|
|
break;
|
|
}
|
|
if (tp == NULL)
|
|
break;
|
|
c = *tp;
|
|
while (isspace(c))
|
|
tp++;
|
|
if (!isdigit(c))
|
|
break;
|
|
cp = tp;
|
|
}
|
|
set80211(s, IEEE80211_IOC_CHANLIST, 0, sizeof(chanlist), &chanlist);
|
|
}
|
|
|
|
static void
|
|
set80211bssid(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
|
|
if (!isanyarg(val)) {
|
|
char *temp;
|
|
struct sockaddr_dl sdl;
|
|
|
|
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
|
|
if (temp == NULL)
|
|
errx(1, "malloc failed");
|
|
temp[0] = ':';
|
|
strcpy(temp + 1, val);
|
|
sdl.sdl_len = sizeof(sdl);
|
|
link_addr(temp, &sdl);
|
|
free(temp);
|
|
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
|
|
errx(1, "malformed link-level address");
|
|
set80211(s, IEEE80211_IOC_BSSID, 0,
|
|
IEEE80211_ADDR_LEN, LLADDR(&sdl));
|
|
} else {
|
|
uint8_t zerobssid[IEEE80211_ADDR_LEN];
|
|
memset(zerobssid, 0, sizeof(zerobssid));
|
|
set80211(s, IEEE80211_IOC_BSSID, 0,
|
|
IEEE80211_ADDR_LEN, zerobssid);
|
|
}
|
|
}
|
|
|
|
static int
|
|
getac(const char *ac)
|
|
{
|
|
if (strcasecmp(ac, "ac_be") == 0 || strcasecmp(ac, "be") == 0)
|
|
return WME_AC_BE;
|
|
if (strcasecmp(ac, "ac_bk") == 0 || strcasecmp(ac, "bk") == 0)
|
|
return WME_AC_BK;
|
|
if (strcasecmp(ac, "ac_vi") == 0 || strcasecmp(ac, "vi") == 0)
|
|
return WME_AC_VI;
|
|
if (strcasecmp(ac, "ac_vo") == 0 || strcasecmp(ac, "vo") == 0)
|
|
return WME_AC_VO;
|
|
errx(1, "unknown wme access class %s", ac);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211cwmin, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_CWMIN, atoi(val), getac(ac), NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211cwmax, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_CWMAX, atoi(val), getac(ac), NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211aifs, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_AIFS, atoi(val), getac(ac), NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211txoplimit, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_TXOPLIMIT, atoi(val), getac(ac), NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211acm, ac, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_ACM, 1, getac(ac), NULL);
|
|
}
|
|
static
|
|
DECL_CMD_FUNC(set80211noacm, ac, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_ACM, 0, getac(ac), NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211ackpolicy, ac, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_ACKPOLICY, 1, getac(ac), NULL);
|
|
}
|
|
static
|
|
DECL_CMD_FUNC(set80211noackpolicy, ac, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_ACKPOLICY, 0, getac(ac), NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211bsscwmin, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_CWMIN, atoi(val),
|
|
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211bsscwmax, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_CWMAX, atoi(val),
|
|
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211bssaifs, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_AIFS, atoi(val),
|
|
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC2(set80211bsstxoplimit, ac, val)
|
|
{
|
|
set80211(s, IEEE80211_IOC_WME_TXOPLIMIT, atoi(val),
|
|
getac(ac)|IEEE80211_WMEPARAM_BSS, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211dtimperiod, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_DTIM_PERIOD, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211bintval, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_BEACON_INTERVAL, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211macmac(int s, int op, const char *val)
|
|
{
|
|
char *temp;
|
|
struct sockaddr_dl sdl;
|
|
|
|
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
|
|
if (temp == NULL)
|
|
errx(1, "malloc failed");
|
|
temp[0] = ':';
|
|
strcpy(temp + 1, val);
|
|
sdl.sdl_len = sizeof(sdl);
|
|
link_addr(temp, &sdl);
|
|
free(temp);
|
|
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
|
|
errx(1, "malformed link-level address");
|
|
set80211(s, op, 0, IEEE80211_ADDR_LEN, LLADDR(&sdl));
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211addmac, val, d)
|
|
{
|
|
set80211macmac(s, IEEE80211_IOC_ADDMAC, val);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211delmac, val, d)
|
|
{
|
|
set80211macmac(s, IEEE80211_IOC_DELMAC, val);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211kickmac, val, d)
|
|
{
|
|
char *temp;
|
|
struct sockaddr_dl sdl;
|
|
struct ieee80211req_mlme mlme;
|
|
|
|
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
|
|
if (temp == NULL)
|
|
errx(1, "malloc failed");
|
|
temp[0] = ':';
|
|
strcpy(temp + 1, val);
|
|
sdl.sdl_len = sizeof(sdl);
|
|
link_addr(temp, &sdl);
|
|
free(temp);
|
|
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
|
|
errx(1, "malformed link-level address");
|
|
memset(&mlme, 0, sizeof(mlme));
|
|
mlme.im_op = IEEE80211_MLME_DEAUTH;
|
|
mlme.im_reason = IEEE80211_REASON_AUTH_EXPIRE;
|
|
memcpy(mlme.im_macaddr, LLADDR(&sdl), IEEE80211_ADDR_LEN);
|
|
set80211(s, IEEE80211_IOC_MLME, 0, sizeof(mlme), &mlme);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211maccmd, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_MACCMD, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211meshrtmac(int s, int req, const char *val)
|
|
{
|
|
char *temp;
|
|
struct sockaddr_dl sdl;
|
|
|
|
temp = malloc(strlen(val) + 2); /* ':' and '\0' */
|
|
if (temp == NULL)
|
|
errx(1, "malloc failed");
|
|
temp[0] = ':';
|
|
strcpy(temp + 1, val);
|
|
sdl.sdl_len = sizeof(sdl);
|
|
link_addr(temp, &sdl);
|
|
free(temp);
|
|
if (sdl.sdl_alen != IEEE80211_ADDR_LEN)
|
|
errx(1, "malformed link-level address");
|
|
set80211(s, IEEE80211_IOC_MESH_RTCMD, req,
|
|
IEEE80211_ADDR_LEN, LLADDR(&sdl));
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211addmeshrt, val, d)
|
|
{
|
|
set80211meshrtmac(s, IEEE80211_MESH_RTCMD_ADD, val);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211delmeshrt, val, d)
|
|
{
|
|
set80211meshrtmac(s, IEEE80211_MESH_RTCMD_DELETE, val);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211meshrtcmd, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_MESH_RTCMD, d, 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211hwmprootmode, val, d)
|
|
{
|
|
int mode;
|
|
|
|
if (strcasecmp(val, "normal") == 0)
|
|
mode = IEEE80211_HWMP_ROOTMODE_NORMAL;
|
|
else if (strcasecmp(val, "proactive") == 0)
|
|
mode = IEEE80211_HWMP_ROOTMODE_PROACTIVE;
|
|
else if (strcasecmp(val, "rann") == 0)
|
|
mode = IEEE80211_HWMP_ROOTMODE_RANN;
|
|
else
|
|
mode = IEEE80211_HWMP_ROOTMODE_DISABLED;
|
|
set80211(s, IEEE80211_IOC_HWMP_ROOTMODE, mode, 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211hwmpmaxhops, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_HWMP_MAXHOPS, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211pureg(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_PUREG, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211bgscan(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_BGSCAN, d, 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211bgscanidle, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_BGSCAN_IDLE, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211bgscanintvl, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_BGSCAN_INTERVAL, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211scanvalid, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_SCANVALID, atoi(val), 0, NULL);
|
|
}
|
|
|
|
/*
|
|
* Parse an optional trailing specification of which netbands
|
|
* to apply a parameter to. This is basically the same syntax
|
|
* as used for channels but you can concatenate to specify
|
|
* multiple. For example:
|
|
* 14:abg apply to 11a, 11b, and 11g
|
|
* 6:ht apply to 11na and 11ng
|
|
* We don't make a big effort to catch silly things; this is
|
|
* really a convenience mechanism.
|
|
*/
|
|
static int
|
|
getmodeflags(const char *val)
|
|
{
|
|
const char *cp;
|
|
int flags;
|
|
|
|
flags = 0;
|
|
|
|
cp = strchr(val, ':');
|
|
if (cp != NULL) {
|
|
for (cp++; isalpha((int) *cp); cp++) {
|
|
/* accept mixed case */
|
|
int c = *cp;
|
|
if (isupper(c))
|
|
c = tolower(c);
|
|
switch (c) {
|
|
case 'a': /* 802.11a */
|
|
flags |= IEEE80211_CHAN_A;
|
|
break;
|
|
case 'b': /* 802.11b */
|
|
flags |= IEEE80211_CHAN_B;
|
|
break;
|
|
case 'g': /* 802.11g */
|
|
flags |= IEEE80211_CHAN_G;
|
|
break;
|
|
case 'n': /* 802.11n */
|
|
flags |= IEEE80211_CHAN_HT;
|
|
break;
|
|
case 'd': /* dt = Atheros Dynamic Turbo */
|
|
flags |= IEEE80211_CHAN_TURBO;
|
|
break;
|
|
case 't': /* ht, dt, st, t */
|
|
/* dt and unadorned t specify Dynamic Turbo */
|
|
if ((flags & (IEEE80211_CHAN_STURBO|IEEE80211_CHAN_HT)) == 0)
|
|
flags |= IEEE80211_CHAN_TURBO;
|
|
break;
|
|
case 's': /* st = Atheros Static Turbo */
|
|
flags |= IEEE80211_CHAN_STURBO;
|
|
break;
|
|
case 'h': /* 1/2-width channels */
|
|
flags |= IEEE80211_CHAN_HALF;
|
|
break;
|
|
case 'q': /* 1/4-width channels */
|
|
flags |= IEEE80211_CHAN_QUARTER;
|
|
break;
|
|
default:
|
|
errx(-1, "%s: Invalid mode attribute %c\n",
|
|
val, *cp);
|
|
}
|
|
}
|
|
}
|
|
return flags;
|
|
}
|
|
|
|
#define IEEE80211_CHAN_HTA (IEEE80211_CHAN_HT|IEEE80211_CHAN_5GHZ)
|
|
#define IEEE80211_CHAN_HTG (IEEE80211_CHAN_HT|IEEE80211_CHAN_2GHZ)
|
|
|
|
#define _APPLY(_flags, _base, _param, _v) do { \
|
|
if (_flags & IEEE80211_CHAN_HT) { \
|
|
if ((_flags & (IEEE80211_CHAN_5GHZ|IEEE80211_CHAN_2GHZ)) == 0) {\
|
|
_base.params[IEEE80211_MODE_11NA]._param = _v; \
|
|
_base.params[IEEE80211_MODE_11NG]._param = _v; \
|
|
} else if (_flags & IEEE80211_CHAN_5GHZ) \
|
|
_base.params[IEEE80211_MODE_11NA]._param = _v; \
|
|
else \
|
|
_base.params[IEEE80211_MODE_11NG]._param = _v; \
|
|
} \
|
|
if (_flags & IEEE80211_CHAN_TURBO) { \
|
|
if ((_flags & (IEEE80211_CHAN_5GHZ|IEEE80211_CHAN_2GHZ)) == 0) {\
|
|
_base.params[IEEE80211_MODE_TURBO_A]._param = _v; \
|
|
_base.params[IEEE80211_MODE_TURBO_G]._param = _v; \
|
|
} else if (_flags & IEEE80211_CHAN_5GHZ) \
|
|
_base.params[IEEE80211_MODE_TURBO_A]._param = _v; \
|
|
else \
|
|
_base.params[IEEE80211_MODE_TURBO_G]._param = _v; \
|
|
} \
|
|
if (_flags & IEEE80211_CHAN_STURBO) \
|
|
_base.params[IEEE80211_MODE_STURBO_A]._param = _v; \
|
|
if ((_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) \
|
|
_base.params[IEEE80211_MODE_11A]._param = _v; \
|
|
if ((_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) \
|
|
_base.params[IEEE80211_MODE_11G]._param = _v; \
|
|
if ((_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) \
|
|
_base.params[IEEE80211_MODE_11B]._param = _v; \
|
|
if (_flags & IEEE80211_CHAN_HALF) \
|
|
_base.params[IEEE80211_MODE_HALF]._param = _v; \
|
|
if (_flags & IEEE80211_CHAN_QUARTER) \
|
|
_base.params[IEEE80211_MODE_QUARTER]._param = _v; \
|
|
} while (0)
|
|
#define _APPLY1(_flags, _base, _param, _v) do { \
|
|
if (_flags & IEEE80211_CHAN_HT) { \
|
|
if (_flags & IEEE80211_CHAN_5GHZ) \
|
|
_base.params[IEEE80211_MODE_11NA]._param = _v; \
|
|
else \
|
|
_base.params[IEEE80211_MODE_11NG]._param = _v; \
|
|
} else if ((_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A) \
|
|
_base.params[IEEE80211_MODE_TURBO_A]._param = _v; \
|
|
else if ((_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G) \
|
|
_base.params[IEEE80211_MODE_TURBO_G]._param = _v; \
|
|
else if ((_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST) \
|
|
_base.params[IEEE80211_MODE_STURBO_A]._param = _v; \
|
|
else if (_flags & IEEE80211_CHAN_HALF) \
|
|
_base.params[IEEE80211_MODE_HALF]._param = _v; \
|
|
else if (_flags & IEEE80211_CHAN_QUARTER) \
|
|
_base.params[IEEE80211_MODE_QUARTER]._param = _v; \
|
|
else if ((_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A) \
|
|
_base.params[IEEE80211_MODE_11A]._param = _v; \
|
|
else if ((_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G) \
|
|
_base.params[IEEE80211_MODE_11G]._param = _v; \
|
|
else if ((_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B) \
|
|
_base.params[IEEE80211_MODE_11B]._param = _v; \
|
|
} while (0)
|
|
#define _APPLY_RATE(_flags, _base, _param, _v) do { \
|
|
if (_flags & IEEE80211_CHAN_HT) { \
|
|
(_v) = (_v / 2) | IEEE80211_RATE_MCS; \
|
|
} \
|
|
_APPLY(_flags, _base, _param, _v); \
|
|
} while (0)
|
|
#define _APPLY_RATE1(_flags, _base, _param, _v) do { \
|
|
if (_flags & IEEE80211_CHAN_HT) { \
|
|
(_v) = (_v / 2) | IEEE80211_RATE_MCS; \
|
|
} \
|
|
_APPLY1(_flags, _base, _param, _v); \
|
|
} while (0)
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211roamrssi, val, d)
|
|
{
|
|
double v = atof(val);
|
|
int rssi, flags;
|
|
|
|
rssi = (int) (2*v);
|
|
if (rssi != 2*v)
|
|
errx(-1, "invalid rssi (must be .5 dBm units)");
|
|
flags = getmodeflags(val);
|
|
getroam(s);
|
|
if (flags == 0) { /* NB: no flags => current channel */
|
|
flags = getcurchan(s)->ic_flags;
|
|
_APPLY1(flags, roamparams, rssi, rssi);
|
|
} else
|
|
_APPLY(flags, roamparams, rssi, rssi);
|
|
callback_register(setroam_cb, &roamparams);
|
|
}
|
|
|
|
static int
|
|
getrate(const char *val, const char *tag)
|
|
{
|
|
double v = atof(val);
|
|
int rate;
|
|
|
|
rate = (int) (2*v);
|
|
if (rate != 2*v)
|
|
errx(-1, "invalid %s rate (must be .5 Mb/s units)", tag);
|
|
return rate; /* NB: returns 2x the specified value */
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211roamrate, val, d)
|
|
{
|
|
int rate, flags;
|
|
|
|
rate = getrate(val, "roam");
|
|
flags = getmodeflags(val);
|
|
getroam(s);
|
|
if (flags == 0) { /* NB: no flags => current channel */
|
|
flags = getcurchan(s)->ic_flags;
|
|
_APPLY_RATE1(flags, roamparams, rate, rate);
|
|
} else
|
|
_APPLY_RATE(flags, roamparams, rate, rate);
|
|
callback_register(setroam_cb, &roamparams);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211mcastrate, val, d)
|
|
{
|
|
int rate, flags;
|
|
|
|
rate = getrate(val, "mcast");
|
|
flags = getmodeflags(val);
|
|
gettxparams(s);
|
|
if (flags == 0) { /* NB: no flags => current channel */
|
|
flags = getcurchan(s)->ic_flags;
|
|
_APPLY_RATE1(flags, txparams, mcastrate, rate);
|
|
} else
|
|
_APPLY_RATE(flags, txparams, mcastrate, rate);
|
|
callback_register(settxparams_cb, &txparams);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211mgtrate, val, d)
|
|
{
|
|
int rate, flags;
|
|
|
|
rate = getrate(val, "mgmt");
|
|
flags = getmodeflags(val);
|
|
gettxparams(s);
|
|
if (flags == 0) { /* NB: no flags => current channel */
|
|
flags = getcurchan(s)->ic_flags;
|
|
_APPLY_RATE1(flags, txparams, mgmtrate, rate);
|
|
} else
|
|
_APPLY_RATE(flags, txparams, mgmtrate, rate);
|
|
callback_register(settxparams_cb, &txparams);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211ucastrate, val, d)
|
|
{
|
|
int flags;
|
|
|
|
gettxparams(s);
|
|
flags = getmodeflags(val);
|
|
if (isanyarg(val)) {
|
|
if (flags == 0) { /* NB: no flags => current channel */
|
|
flags = getcurchan(s)->ic_flags;
|
|
_APPLY1(flags, txparams, ucastrate,
|
|
IEEE80211_FIXED_RATE_NONE);
|
|
} else
|
|
_APPLY(flags, txparams, ucastrate,
|
|
IEEE80211_FIXED_RATE_NONE);
|
|
} else {
|
|
int rate = getrate(val, "ucast");
|
|
if (flags == 0) { /* NB: no flags => current channel */
|
|
flags = getcurchan(s)->ic_flags;
|
|
_APPLY_RATE1(flags, txparams, ucastrate, rate);
|
|
} else
|
|
_APPLY_RATE(flags, txparams, ucastrate, rate);
|
|
}
|
|
callback_register(settxparams_cb, &txparams);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211maxretry, val, d)
|
|
{
|
|
int v = atoi(val), flags;
|
|
|
|
flags = getmodeflags(val);
|
|
gettxparams(s);
|
|
if (flags == 0) { /* NB: no flags => current channel */
|
|
flags = getcurchan(s)->ic_flags;
|
|
_APPLY1(flags, txparams, maxretry, v);
|
|
} else
|
|
_APPLY(flags, txparams, maxretry, v);
|
|
callback_register(settxparams_cb, &txparams);
|
|
}
|
|
#undef _APPLY_RATE
|
|
#undef _APPLY
|
|
#undef IEEE80211_CHAN_HTA
|
|
#undef IEEE80211_CHAN_HTG
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211fragthreshold, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_FRAGTHRESHOLD,
|
|
isundefarg(val) ? IEEE80211_FRAG_MAX : atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211bmissthreshold, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_BMISSTHRESHOLD,
|
|
isundefarg(val) ? IEEE80211_HWBMISS_MAX : atoi(val), 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211burst(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_BURST, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211doth(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_DOTH, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211dfs(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_DFS, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211shortgi(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_SHORTGI,
|
|
d ? (IEEE80211_HTCAP_SHORTGI20 | IEEE80211_HTCAP_SHORTGI40) : 0,
|
|
0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211ampdu(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int ampdu;
|
|
|
|
if (get80211val(s, IEEE80211_IOC_AMPDU, &du) < 0)
|
|
errx(-1, "cannot get AMPDU setting");
|
|
if (d < 0) {
|
|
d = -d;
|
|
ampdu &= ~d;
|
|
} else
|
|
ampdu |= d;
|
|
set80211(s, IEEE80211_IOC_AMPDU, ampdu, 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211ampdulimit, val, d)
|
|
{
|
|
int v;
|
|
|
|
switch (atoi(val)) {
|
|
case 8:
|
|
case 8*1024:
|
|
v = IEEE80211_HTCAP_MAXRXAMPDU_8K;
|
|
break;
|
|
case 16:
|
|
case 16*1024:
|
|
v = IEEE80211_HTCAP_MAXRXAMPDU_16K;
|
|
break;
|
|
case 32:
|
|
case 32*1024:
|
|
v = IEEE80211_HTCAP_MAXRXAMPDU_32K;
|
|
break;
|
|
case 64:
|
|
case 64*1024:
|
|
v = IEEE80211_HTCAP_MAXRXAMPDU_64K;
|
|
break;
|
|
default:
|
|
errx(-1, "invalid A-MPDU limit %s", val);
|
|
}
|
|
set80211(s, IEEE80211_IOC_AMPDU_LIMIT, v, 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211ampdudensity, val, d)
|
|
{
|
|
int v;
|
|
|
|
if (isanyarg(val) || strcasecmp(val, "na") == 0)
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_NA;
|
|
else switch ((int)(atof(val)*4)) {
|
|
case 0:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_NA;
|
|
break;
|
|
case 1:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_025;
|
|
break;
|
|
case 2:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_05;
|
|
break;
|
|
case 4:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_1;
|
|
break;
|
|
case 8:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_2;
|
|
break;
|
|
case 16:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_4;
|
|
break;
|
|
case 32:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_8;
|
|
break;
|
|
case 64:
|
|
v = IEEE80211_HTCAP_MPDUDENSITY_16;
|
|
break;
|
|
default:
|
|
errx(-1, "invalid A-MPDU density %s", val);
|
|
}
|
|
set80211(s, IEEE80211_IOC_AMPDU_DENSITY, v, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211amsdu(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
int amsdu;
|
|
|
|
if (get80211val(s, IEEE80211_IOC_AMSDU, &amsdu) < 0)
|
|
err(-1, "cannot get AMSDU setting");
|
|
if (d < 0) {
|
|
d = -d;
|
|
amsdu &= ~d;
|
|
} else
|
|
amsdu |= d;
|
|
set80211(s, IEEE80211_IOC_AMSDU, amsdu, 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211amsdulimit, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_AMSDU_LIMIT, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211puren(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_PUREN, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211htcompat(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_HTCOMPAT, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211htconf(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_HTCONF, d, 0, NULL);
|
|
htconf = d;
|
|
}
|
|
|
|
static void
|
|
set80211dwds(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_DWDS, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211inact(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_INACTIVITY, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211tsn(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_TSN, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211dotd(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_DOTD, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211smps(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_SMPS, d, 0, NULL);
|
|
}
|
|
|
|
static void
|
|
set80211rifs(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
set80211(s, IEEE80211_IOC_RIFS, d, 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211tdmaslot, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_TDMA_SLOT, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211tdmaslotcnt, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_TDMA_SLOTCNT, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211tdmaslotlen, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_TDMA_SLOTLEN, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211tdmabintval, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_TDMA_BINTERVAL, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211meshttl, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_MESH_TTL, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211meshforward, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_MESH_FWRD, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211meshpeering, val, d)
|
|
{
|
|
set80211(s, IEEE80211_IOC_MESH_AP, atoi(val), 0, NULL);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211meshmetric, val, d)
|
|
{
|
|
char v[12];
|
|
|
|
memcpy(v, val, sizeof(v));
|
|
set80211(s, IEEE80211_IOC_MESH_PR_METRIC, 0, 0, v);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211meshpath, val, d)
|
|
{
|
|
char v[12];
|
|
|
|
memcpy(v, val, sizeof(v));
|
|
set80211(s, IEEE80211_IOC_MESH_PR_PATH, 0, 0, v);
|
|
}
|
|
|
|
static int
|
|
regdomain_sort(const void *a, const void *b)
|
|
{
|
|
#define CHAN_ALL \
|
|
(IEEE80211_CHAN_ALLTURBO|IEEE80211_CHAN_HALF|IEEE80211_CHAN_QUARTER)
|
|
const struct ieee80211_channel *ca = a;
|
|
const struct ieee80211_channel *cb = b;
|
|
|
|
return ca->ic_freq == cb->ic_freq ?
|
|
(ca->ic_flags & CHAN_ALL) - (cb->ic_flags & CHAN_ALL) :
|
|
ca->ic_freq - cb->ic_freq;
|
|
#undef CHAN_ALL
|
|
}
|
|
|
|
static const struct ieee80211_channel *
|
|
chanlookup(const struct ieee80211_channel chans[], int nchans,
|
|
int freq, int flags)
|
|
{
|
|
int i;
|
|
|
|
flags &= IEEE80211_CHAN_ALLTURBO;
|
|
for (i = 0; i < nchans; i++) {
|
|
const struct ieee80211_channel *c = &chans[i];
|
|
if (c->ic_freq == freq &&
|
|
(c->ic_flags & IEEE80211_CHAN_ALLTURBO) == flags)
|
|
return c;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
chanfind(const struct ieee80211_channel chans[], int nchans, int flags)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nchans; i++) {
|
|
const struct ieee80211_channel *c = &chans[i];
|
|
if ((c->ic_flags & flags) == flags)
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check channel compatibility.
|
|
*/
|
|
static int
|
|
checkchan(const struct ieee80211req_chaninfo *avail, int freq, int flags)
|
|
{
|
|
flags &= ~REQ_FLAGS;
|
|
/*
|
|
* Check if exact channel is in the calibration table;
|
|
* everything below is to deal with channels that we
|
|
* want to include but that are not explicitly listed.
|
|
*/
|
|
if (flags & IEEE80211_CHAN_HT40) {
|
|
/* NB: we use an HT40 channel center that matches HT20 */
|
|
flags = (flags &~ IEEE80211_CHAN_HT40) | IEEE80211_CHAN_HT20;
|
|
}
|
|
if (chanlookup(avail->ic_chans, avail->ic_nchans, freq, flags) != NULL)
|
|
return 1;
|
|
if (flags & IEEE80211_CHAN_GSM) {
|
|
/*
|
|
* XXX GSM frequency mapping is handled in the kernel
|
|
* so we cannot find them in the calibration table;
|
|
* just accept the channel and the kernel will reject
|
|
* the channel list if it's wrong.
|
|
*/
|
|
return 1;
|
|
}
|
|
/*
|
|
* If this is a 1/2 or 1/4 width channel allow it if a full
|
|
* width channel is present for this frequency, and the device
|
|
* supports fractional channels on this band. This is a hack
|
|
* that avoids bloating the calibration table; it may be better
|
|
* by per-band attributes though (we are effectively calculating
|
|
* this attribute by scanning the channel list ourself).
|
|
*/
|
|
if ((flags & (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER)) == 0)
|
|
return 0;
|
|
if (chanlookup(avail->ic_chans, avail->ic_nchans, freq,
|
|
flags &~ (IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER)) == NULL)
|
|
return 0;
|
|
if (flags & IEEE80211_CHAN_HALF) {
|
|
return chanfind(avail->ic_chans, avail->ic_nchans,
|
|
IEEE80211_CHAN_HALF |
|
|
(flags & (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ)));
|
|
} else {
|
|
return chanfind(avail->ic_chans, avail->ic_nchans,
|
|
IEEE80211_CHAN_QUARTER |
|
|
(flags & (IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ)));
|
|
}
|
|
}
|
|
|
|
static void
|
|
regdomain_addchans(struct ieee80211req_chaninfo *ci,
|
|
const netband_head *bands,
|
|
const struct ieee80211_regdomain *reg,
|
|
uint32_t chanFlags,
|
|
const struct ieee80211req_chaninfo *avail)
|
|
{
|
|
const struct netband *nb;
|
|
const struct freqband *b;
|
|
struct ieee80211_channel *c, *prev;
|
|
int freq, hi_adj, lo_adj, channelSep;
|
|
uint32_t flags;
|
|
|
|
hi_adj = (chanFlags & IEEE80211_CHAN_HT40U) ? -20 : 0;
|
|
lo_adj = (chanFlags & IEEE80211_CHAN_HT40D) ? 20 : 0;
|
|
channelSep = (chanFlags & IEEE80211_CHAN_2GHZ) ? 0 : 40;
|
|
LIST_FOREACH(nb, bands, next) {
|
|
b = nb->band;
|
|
if (verbose) {
|
|
printf("%s:", __func__);
|
|
printb(" chanFlags", chanFlags, IEEE80211_CHAN_BITS);
|
|
printb(" bandFlags", nb->flags | b->flags,
|
|
IEEE80211_CHAN_BITS);
|
|
putchar('\n');
|
|
}
|
|
prev = NULL;
|
|
for (freq = b->freqStart + lo_adj;
|
|
freq <= b->freqEnd + hi_adj; freq += b->chanSep) {
|
|
/*
|
|
* Construct flags for the new channel. We take
|
|
* the attributes from the band descriptions except
|
|
* for HT40 which is enabled generically (i.e. +/-
|
|
* extension channel) in the band description and
|
|
* then constrained according by channel separation.
|
|
*/
|
|
flags = nb->flags | b->flags;
|
|
if (flags & IEEE80211_CHAN_HT) {
|
|
/*
|
|
* HT channels are generated specially; we're
|
|
* called to add HT20, HT40+, and HT40- chan's
|
|
* so we need to expand only band specs for
|
|
* the HT channel type being added.
|
|
*/
|
|
if ((chanFlags & IEEE80211_CHAN_HT20) &&
|
|
(flags & IEEE80211_CHAN_HT20) == 0) {
|
|
if (verbose)
|
|
printf("%u: skip, not an "
|
|
"HT20 channel\n", freq);
|
|
continue;
|
|
}
|
|
if ((chanFlags & IEEE80211_CHAN_HT40) &&
|
|
(flags & IEEE80211_CHAN_HT40) == 0) {
|
|
if (verbose)
|
|
printf("%u: skip, not an "
|
|
"HT40 channel\n", freq);
|
|
continue;
|
|
}
|
|
/*
|
|
* DFS and HT40 don't mix. This should be
|
|
* expressed in the regdomain database but
|
|
* just in case enforce it here.
|
|
*/
|
|
if ((chanFlags & IEEE80211_CHAN_HT40) &&
|
|
(flags & IEEE80211_CHAN_DFS)) {
|
|
if (verbose)
|
|
printf("%u: skip, HT40+DFS "
|
|
"not permitted\n", freq);
|
|
continue;
|
|
}
|
|
/* NB: HT attribute comes from caller */
|
|
flags &= ~IEEE80211_CHAN_HT;
|
|
flags |= chanFlags & IEEE80211_CHAN_HT;
|
|
}
|
|
/*
|
|
* Check if device can operate on this frequency.
|
|
*/
|
|
if (!checkchan(avail, freq, flags)) {
|
|
if (verbose) {
|
|
printf("%u: skip, ", freq);
|
|
printb("flags", flags,
|
|
IEEE80211_CHAN_BITS);
|
|
printf(" not available\n");
|
|
}
|
|
continue;
|
|
}
|
|
if ((flags & REQ_ECM) && !reg->ecm) {
|
|
if (verbose)
|
|
printf("%u: skip, ECM channel\n", freq);
|
|
continue;
|
|
}
|
|
if ((flags & REQ_INDOOR) && reg->location == 'O') {
|
|
if (verbose)
|
|
printf("%u: skip, indoor channel\n",
|
|
freq);
|
|
continue;
|
|
}
|
|
if ((flags & REQ_OUTDOOR) && reg->location == 'I') {
|
|
if (verbose)
|
|
printf("%u: skip, outdoor channel\n",
|
|
freq);
|
|
continue;
|
|
}
|
|
if ((flags & IEEE80211_CHAN_HT40) &&
|
|
prev != NULL && (freq - prev->ic_freq) < channelSep) {
|
|
if (verbose)
|
|
printf("%u: skip, only %u channel "
|
|
"separation, need %d\n", freq,
|
|
freq - prev->ic_freq, channelSep);
|
|
continue;
|
|
}
|
|
if (ci->ic_nchans == IEEE80211_CHAN_MAX) {
|
|
if (verbose)
|
|
printf("%u: skip, channel table full\n",
|
|
freq);
|
|
break;
|
|
}
|
|
c = &ci->ic_chans[ci->ic_nchans++];
|
|
memset(c, 0, sizeof(*c));
|
|
c->ic_freq = freq;
|
|
c->ic_flags = flags;
|
|
if (c->ic_flags & IEEE80211_CHAN_DFS)
|
|
c->ic_maxregpower = nb->maxPowerDFS;
|
|
else
|
|
c->ic_maxregpower = nb->maxPower;
|
|
if (verbose) {
|
|
printf("[%3d] add freq %u ",
|
|
ci->ic_nchans-1, c->ic_freq);
|
|
printb("flags", c->ic_flags, IEEE80211_CHAN_BITS);
|
|
printf(" power %u\n", c->ic_maxregpower);
|
|
}
|
|
/* NB: kernel fills in other fields */
|
|
prev = c;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
regdomain_makechannels(
|
|
struct ieee80211_regdomain_req *req,
|
|
const struct ieee80211_devcaps_req *dc)
|
|
{
|
|
struct regdata *rdp = getregdata();
|
|
const struct country *cc;
|
|
const struct ieee80211_regdomain *reg = &req->rd;
|
|
struct ieee80211req_chaninfo *ci = &req->chaninfo;
|
|
const struct regdomain *rd;
|
|
|
|
/*
|
|
* Locate construction table for new channel list. We treat
|
|
* the regdomain/SKU as definitive so a country can be in
|
|
* multiple with different properties (e.g. US in FCC+FCC3).
|
|
* If no regdomain is specified then we fallback on the country
|
|
* code to find the associated regdomain since countries always
|
|
* belong to at least one regdomain.
|
|
*/
|
|
if (reg->regdomain == 0) {
|
|
cc = lib80211_country_findbycc(rdp, reg->country);
|
|
if (cc == NULL)
|
|
errx(1, "internal error, country %d not found",
|
|
reg->country);
|
|
rd = cc->rd;
|
|
} else
|
|
rd = lib80211_regdomain_findbysku(rdp, reg->regdomain);
|
|
if (rd == NULL)
|
|
errx(1, "internal error, regdomain %d not found",
|
|
reg->regdomain);
|
|
if (rd->sku != SKU_DEBUG) {
|
|
/*
|
|
* regdomain_addchans incrememnts the channel count for
|
|
* each channel it adds so initialize ic_nchans to zero.
|
|
* Note that we know we have enough space to hold all possible
|
|
* channels because the devcaps list size was used to
|
|
* allocate our request.
|
|
*/
|
|
ci->ic_nchans = 0;
|
|
if (!LIST_EMPTY(&rd->bands_11b))
|
|
regdomain_addchans(ci, &rd->bands_11b, reg,
|
|
IEEE80211_CHAN_B, &dc->dc_chaninfo);
|
|
if (!LIST_EMPTY(&rd->bands_11g))
|
|
regdomain_addchans(ci, &rd->bands_11g, reg,
|
|
IEEE80211_CHAN_G, &dc->dc_chaninfo);
|
|
if (!LIST_EMPTY(&rd->bands_11a))
|
|
regdomain_addchans(ci, &rd->bands_11a, reg,
|
|
IEEE80211_CHAN_A, &dc->dc_chaninfo);
|
|
if (!LIST_EMPTY(&rd->bands_11na) && dc->dc_htcaps != 0) {
|
|
regdomain_addchans(ci, &rd->bands_11na, reg,
|
|
IEEE80211_CHAN_A | IEEE80211_CHAN_HT20,
|
|
&dc->dc_chaninfo);
|
|
if (dc->dc_htcaps & IEEE80211_HTCAP_CHWIDTH40) {
|
|
regdomain_addchans(ci, &rd->bands_11na, reg,
|
|
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40U,
|
|
&dc->dc_chaninfo);
|
|
regdomain_addchans(ci, &rd->bands_11na, reg,
|
|
IEEE80211_CHAN_A | IEEE80211_CHAN_HT40D,
|
|
&dc->dc_chaninfo);
|
|
}
|
|
}
|
|
if (!LIST_EMPTY(&rd->bands_11ng) && dc->dc_htcaps != 0) {
|
|
regdomain_addchans(ci, &rd->bands_11ng, reg,
|
|
IEEE80211_CHAN_G | IEEE80211_CHAN_HT20,
|
|
&dc->dc_chaninfo);
|
|
if (dc->dc_htcaps & IEEE80211_HTCAP_CHWIDTH40) {
|
|
regdomain_addchans(ci, &rd->bands_11ng, reg,
|
|
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40U,
|
|
&dc->dc_chaninfo);
|
|
regdomain_addchans(ci, &rd->bands_11ng, reg,
|
|
IEEE80211_CHAN_G | IEEE80211_CHAN_HT40D,
|
|
&dc->dc_chaninfo);
|
|
}
|
|
}
|
|
qsort(ci->ic_chans, ci->ic_nchans, sizeof(ci->ic_chans[0]),
|
|
regdomain_sort);
|
|
} else
|
|
memcpy(ci, &dc->dc_chaninfo,
|
|
IEEE80211_CHANINFO_SPACE(&dc->dc_chaninfo));
|
|
}
|
|
|
|
static void
|
|
list_countries(void)
|
|
{
|
|
struct regdata *rdp = getregdata();
|
|
const struct country *cp;
|
|
const struct regdomain *dp;
|
|
int i;
|
|
|
|
i = 0;
|
|
printf("\nCountry codes:\n");
|
|
LIST_FOREACH(cp, &rdp->countries, next) {
|
|
printf("%2s %-15.15s%s", cp->isoname,
|
|
cp->name, ((i+1)%4) == 0 ? "\n" : " ");
|
|
i++;
|
|
}
|
|
i = 0;
|
|
printf("\nRegulatory domains:\n");
|
|
LIST_FOREACH(dp, &rdp->domains, next) {
|
|
printf("%-15.15s%s", dp->name, ((i+1)%4) == 0 ? "\n" : " ");
|
|
i++;
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
static void
|
|
defaultcountry(const struct regdomain *rd)
|
|
{
|
|
struct regdata *rdp = getregdata();
|
|
const struct country *cc;
|
|
|
|
cc = lib80211_country_findbycc(rdp, rd->cc->code);
|
|
if (cc == NULL)
|
|
errx(1, "internal error, ISO country code %d not "
|
|
"defined for regdomain %s", rd->cc->code, rd->name);
|
|
regdomain.country = cc->code;
|
|
regdomain.isocc[0] = cc->isoname[0];
|
|
regdomain.isocc[1] = cc->isoname[1];
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211regdomain, val, d)
|
|
{
|
|
struct regdata *rdp = getregdata();
|
|
const struct regdomain *rd;
|
|
|
|
rd = lib80211_regdomain_findbyname(rdp, val);
|
|
if (rd == NULL) {
|
|
char *eptr;
|
|
long sku = strtol(val, &eptr, 0);
|
|
|
|
if (eptr != val)
|
|
rd = lib80211_regdomain_findbysku(rdp, sku);
|
|
if (eptr == val || rd == NULL)
|
|
errx(1, "unknown regdomain %s", val);
|
|
}
|
|
getregdomain(s);
|
|
regdomain.regdomain = rd->sku;
|
|
if (regdomain.country == 0 && rd->cc != NULL) {
|
|
/*
|
|
* No country code setup and there's a default
|
|
* one for this regdomain fill it in.
|
|
*/
|
|
defaultcountry(rd);
|
|
}
|
|
callback_register(setregdomain_cb, ®domain);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211country, val, d)
|
|
{
|
|
struct regdata *rdp = getregdata();
|
|
const struct country *cc;
|
|
|
|
cc = lib80211_country_findbyname(rdp, val);
|
|
if (cc == NULL) {
|
|
char *eptr;
|
|
long code = strtol(val, &eptr, 0);
|
|
|
|
if (eptr != val)
|
|
cc = lib80211_country_findbycc(rdp, code);
|
|
if (eptr == val || cc == NULL)
|
|
errx(1, "unknown ISO country code %s", val);
|
|
}
|
|
getregdomain(s);
|
|
regdomain.regdomain = cc->rd->sku;
|
|
regdomain.country = cc->code;
|
|
regdomain.isocc[0] = cc->isoname[0];
|
|
regdomain.isocc[1] = cc->isoname[1];
|
|
callback_register(setregdomain_cb, ®domain);
|
|
}
|
|
|
|
static void
|
|
set80211location(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
getregdomain(s);
|
|
regdomain.location = d;
|
|
callback_register(setregdomain_cb, ®domain);
|
|
}
|
|
|
|
static void
|
|
set80211ecm(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
getregdomain(s);
|
|
regdomain.ecm = d;
|
|
callback_register(setregdomain_cb, ®domain);
|
|
}
|
|
|
|
static void
|
|
LINE_INIT(char c)
|
|
{
|
|
spacer = c;
|
|
if (c == '\t')
|
|
col = 8;
|
|
else
|
|
col = 1;
|
|
}
|
|
|
|
static void
|
|
LINE_BREAK(void)
|
|
{
|
|
if (spacer != '\t') {
|
|
printf("\n");
|
|
spacer = '\t';
|
|
}
|
|
col = 8; /* 8-col tab */
|
|
}
|
|
|
|
static void
|
|
LINE_CHECK(const char *fmt, ...)
|
|
{
|
|
char buf[80];
|
|
va_list ap;
|
|
int n;
|
|
|
|
va_start(ap, fmt);
|
|
n = vsnprintf(buf+1, sizeof(buf)-1, fmt, ap);
|
|
va_end(ap);
|
|
col += 1+n;
|
|
if (col > MAXCOL) {
|
|
LINE_BREAK();
|
|
col += n;
|
|
}
|
|
buf[0] = spacer;
|
|
printf("%s", buf);
|
|
spacer = ' ';
|
|
}
|
|
|
|
static int
|
|
getmaxrate(const uint8_t rates[15], uint8_t nrates)
|
|
{
|
|
int i, maxrate = -1;
|
|
|
|
for (i = 0; i < nrates; i++) {
|
|
int rate = rates[i] & IEEE80211_RATE_VAL;
|
|
if (rate > maxrate)
|
|
maxrate = rate;
|
|
}
|
|
return maxrate / 2;
|
|
}
|
|
|
|
static const char *
|
|
getcaps(int capinfo)
|
|
{
|
|
static char capstring[32];
|
|
char *cp = capstring;
|
|
|
|
if (capinfo & IEEE80211_CAPINFO_ESS)
|
|
*cp++ = 'E';
|
|
if (capinfo & IEEE80211_CAPINFO_IBSS)
|
|
*cp++ = 'I';
|
|
if (capinfo & IEEE80211_CAPINFO_CF_POLLABLE)
|
|
*cp++ = 'c';
|
|
if (capinfo & IEEE80211_CAPINFO_CF_POLLREQ)
|
|
*cp++ = 'C';
|
|
if (capinfo & IEEE80211_CAPINFO_PRIVACY)
|
|
*cp++ = 'P';
|
|
if (capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE)
|
|
*cp++ = 'S';
|
|
if (capinfo & IEEE80211_CAPINFO_PBCC)
|
|
*cp++ = 'B';
|
|
if (capinfo & IEEE80211_CAPINFO_CHNL_AGILITY)
|
|
*cp++ = 'A';
|
|
if (capinfo & IEEE80211_CAPINFO_SHORT_SLOTTIME)
|
|
*cp++ = 's';
|
|
if (capinfo & IEEE80211_CAPINFO_RSN)
|
|
*cp++ = 'R';
|
|
if (capinfo & IEEE80211_CAPINFO_DSSSOFDM)
|
|
*cp++ = 'D';
|
|
*cp = '\0';
|
|
return capstring;
|
|
}
|
|
|
|
static const char *
|
|
getflags(int flags)
|
|
{
|
|
static char flagstring[32];
|
|
char *cp = flagstring;
|
|
|
|
if (flags & IEEE80211_NODE_AUTH)
|
|
*cp++ = 'A';
|
|
if (flags & IEEE80211_NODE_QOS)
|
|
*cp++ = 'Q';
|
|
if (flags & IEEE80211_NODE_ERP)
|
|
*cp++ = 'E';
|
|
if (flags & IEEE80211_NODE_PWR_MGT)
|
|
*cp++ = 'P';
|
|
if (flags & IEEE80211_NODE_HT) {
|
|
*cp++ = 'H';
|
|
if (flags & IEEE80211_NODE_HTCOMPAT)
|
|
*cp++ = '+';
|
|
}
|
|
if (flags & IEEE80211_NODE_WPS)
|
|
*cp++ = 'W';
|
|
if (flags & IEEE80211_NODE_TSN)
|
|
*cp++ = 'N';
|
|
if (flags & IEEE80211_NODE_AMPDU_TX)
|
|
*cp++ = 'T';
|
|
if (flags & IEEE80211_NODE_AMPDU_RX)
|
|
*cp++ = 'R';
|
|
if (flags & IEEE80211_NODE_MIMO_PS) {
|
|
*cp++ = 'M';
|
|
if (flags & IEEE80211_NODE_MIMO_RTS)
|
|
*cp++ = '+';
|
|
}
|
|
if (flags & IEEE80211_NODE_RIFS)
|
|
*cp++ = 'I';
|
|
if (flags & IEEE80211_NODE_SGI40) {
|
|
*cp++ = 'S';
|
|
if (flags & IEEE80211_NODE_SGI20)
|
|
*cp++ = '+';
|
|
} else if (flags & IEEE80211_NODE_SGI20)
|
|
*cp++ = 's';
|
|
if (flags & IEEE80211_NODE_AMSDU_TX)
|
|
*cp++ = 't';
|
|
if (flags & IEEE80211_NODE_AMSDU_RX)
|
|
*cp++ = 'r';
|
|
*cp = '\0';
|
|
return flagstring;
|
|
}
|
|
|
|
static void
|
|
printie(const char* tag, const uint8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
maxlen -= strlen(tag)+2;
|
|
if (2*ielen > maxlen)
|
|
maxlen--;
|
|
printf("<");
|
|
for (; ielen > 0; ie++, ielen--) {
|
|
if (maxlen-- <= 0)
|
|
break;
|
|
printf("%02x", *ie);
|
|
}
|
|
if (ielen != 0)
|
|
printf("-");
|
|
printf(">");
|
|
}
|
|
}
|
|
|
|
#define LE_READ_2(p) \
|
|
((u_int16_t) \
|
|
((((const u_int8_t *)(p))[0] ) | \
|
|
(((const u_int8_t *)(p))[1] << 8)))
|
|
#define LE_READ_4(p) \
|
|
((u_int32_t) \
|
|
((((const u_int8_t *)(p))[0] ) | \
|
|
(((const u_int8_t *)(p))[1] << 8) | \
|
|
(((const u_int8_t *)(p))[2] << 16) | \
|
|
(((const u_int8_t *)(p))[3] << 24)))
|
|
|
|
/*
|
|
* NB: The decoding routines assume a properly formatted ie
|
|
* which should be safe as the kernel only retains them
|
|
* if they parse ok.
|
|
*/
|
|
|
|
static void
|
|
printwmeparam(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
#define MS(_v, _f) (((_v) & _f) >> _f##_S)
|
|
static const char *acnames[] = { "BE", "BK", "VO", "VI" };
|
|
const struct ieee80211_wme_param *wme =
|
|
(const struct ieee80211_wme_param *) ie;
|
|
int i;
|
|
|
|
printf("%s", tag);
|
|
if (!verbose)
|
|
return;
|
|
printf("<qosinfo 0x%x", wme->param_qosInfo);
|
|
ie += offsetof(struct ieee80211_wme_param, params_acParams);
|
|
for (i = 0; i < WME_NUM_AC; i++) {
|
|
const struct ieee80211_wme_acparams *ac =
|
|
&wme->params_acParams[i];
|
|
|
|
printf(" %s[%saifsn %u cwmin %u cwmax %u txop %u]"
|
|
, acnames[i]
|
|
, MS(ac->acp_aci_aifsn, WME_PARAM_ACM) ? "acm " : ""
|
|
, MS(ac->acp_aci_aifsn, WME_PARAM_AIFSN)
|
|
, MS(ac->acp_logcwminmax, WME_PARAM_LOGCWMIN)
|
|
, MS(ac->acp_logcwminmax, WME_PARAM_LOGCWMAX)
|
|
, LE_READ_2(&ac->acp_txop)
|
|
);
|
|
}
|
|
printf(">");
|
|
#undef MS
|
|
}
|
|
|
|
static void
|
|
printwmeinfo(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
const struct ieee80211_wme_info *wme =
|
|
(const struct ieee80211_wme_info *) ie;
|
|
printf("<version 0x%x info 0x%x>",
|
|
wme->wme_version, wme->wme_info);
|
|
}
|
|
}
|
|
|
|
static void
|
|
printhtcap(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
const struct ieee80211_ie_htcap *htcap =
|
|
(const struct ieee80211_ie_htcap *) ie;
|
|
const char *sep;
|
|
int i, j;
|
|
|
|
printf("<cap 0x%x param 0x%x",
|
|
LE_READ_2(&htcap->hc_cap), htcap->hc_param);
|
|
printf(" mcsset[");
|
|
sep = "";
|
|
for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++)
|
|
if (isset(htcap->hc_mcsset, i)) {
|
|
for (j = i+1; j < IEEE80211_HTRATE_MAXSIZE; j++)
|
|
if (isclr(htcap->hc_mcsset, j))
|
|
break;
|
|
j--;
|
|
if (i == j)
|
|
printf("%s%u", sep, i);
|
|
else
|
|
printf("%s%u-%u", sep, i, j);
|
|
i += j-i;
|
|
sep = ",";
|
|
}
|
|
printf("] extcap 0x%x txbf 0x%x antenna 0x%x>",
|
|
LE_READ_2(&htcap->hc_extcap),
|
|
LE_READ_4(&htcap->hc_txbf),
|
|
htcap->hc_antenna);
|
|
}
|
|
}
|
|
|
|
static void
|
|
printhtinfo(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
const struct ieee80211_ie_htinfo *htinfo =
|
|
(const struct ieee80211_ie_htinfo *) ie;
|
|
const char *sep;
|
|
int i, j;
|
|
|
|
printf("<ctl %u, %x,%x,%x,%x", htinfo->hi_ctrlchannel,
|
|
htinfo->hi_byte1, htinfo->hi_byte2, htinfo->hi_byte3,
|
|
LE_READ_2(&htinfo->hi_byte45));
|
|
printf(" basicmcs[");
|
|
sep = "";
|
|
for (i = 0; i < IEEE80211_HTRATE_MAXSIZE; i++)
|
|
if (isset(htinfo->hi_basicmcsset, i)) {
|
|
for (j = i+1; j < IEEE80211_HTRATE_MAXSIZE; j++)
|
|
if (isclr(htinfo->hi_basicmcsset, j))
|
|
break;
|
|
j--;
|
|
if (i == j)
|
|
printf("%s%u", sep, i);
|
|
else
|
|
printf("%s%u-%u", sep, i, j);
|
|
i += j-i;
|
|
sep = ",";
|
|
}
|
|
printf("]>");
|
|
}
|
|
}
|
|
|
|
static void
|
|
printathie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
const struct ieee80211_ath_ie *ath =
|
|
(const struct ieee80211_ath_ie *)ie;
|
|
|
|
printf("<");
|
|
if (ath->ath_capability & ATHEROS_CAP_TURBO_PRIME)
|
|
printf("DTURBO,");
|
|
if (ath->ath_capability & ATHEROS_CAP_COMPRESSION)
|
|
printf("COMP,");
|
|
if (ath->ath_capability & ATHEROS_CAP_FAST_FRAME)
|
|
printf("FF,");
|
|
if (ath->ath_capability & ATHEROS_CAP_XR)
|
|
printf("XR,");
|
|
if (ath->ath_capability & ATHEROS_CAP_AR)
|
|
printf("AR,");
|
|
if (ath->ath_capability & ATHEROS_CAP_BURST)
|
|
printf("BURST,");
|
|
if (ath->ath_capability & ATHEROS_CAP_WME)
|
|
printf("WME,");
|
|
if (ath->ath_capability & ATHEROS_CAP_BOOST)
|
|
printf("BOOST,");
|
|
printf("0x%x>", LE_READ_2(ath->ath_defkeyix));
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
printmeshconf(const char *tag, const uint8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
#define MATCHOUI(field, oui, string) \
|
|
do { \
|
|
if (memcmp(field, oui, 4) == 0) \
|
|
printf("%s", string); \
|
|
} while (0)
|
|
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
const struct ieee80211_meshconf_ie *mconf =
|
|
(const struct ieee80211_meshconf_ie *)ie;
|
|
const uint8_t null[4] = IEEE80211_MESHCONF_NULL;
|
|
const uint8_t hwmp[4] = IEEE80211_MESHCONF_HWMP;
|
|
const uint8_t airtime[4] = IEEE80211_MESHCONF_AIRTIME;
|
|
const uint8_t ccsig[4] = IEEE80211_MESHCONF_CCSIG;
|
|
const uint8_t sae[4] = IEEE80211_MESHCONF_SAE;
|
|
const uint8_t neighoff[4] = IEEE80211_MESHCONF_SAE;
|
|
printf("<v%d PATH:", mconf->conf_ver);
|
|
MATCHOUI(mconf->conf_pselid, hwmp, "HWMP");
|
|
printf(" LINK:");
|
|
MATCHOUI(mconf->conf_pmetid, airtime, "AIRTIME");
|
|
printf(" CONGESTION:");
|
|
MATCHOUI(mconf->conf_ccid, ccsig, "SIG");
|
|
MATCHOUI(mconf->conf_ccid, null, "NULL");
|
|
printf(" SYNC:");
|
|
MATCHOUI(mconf->conf_syncid, neighoff, "NEIGHOFF");
|
|
MATCHOUI(mconf->conf_syncid, null, "NULL");
|
|
printf(" AUTH:");
|
|
MATCHOUI(mconf->conf_authid, sae, "SAE");
|
|
MATCHOUI(mconf->conf_authid, null, "NULL");
|
|
printf(" FORM:0x%x CAPS:0x%x>", mconf->conf_form,
|
|
mconf->conf_cap);
|
|
}
|
|
#undef MATCHOUI
|
|
}
|
|
|
|
static const char *
|
|
wpa_cipher(const u_int8_t *sel)
|
|
{
|
|
#define WPA_SEL(x) (((x)<<24)|WPA_OUI)
|
|
u_int32_t w = LE_READ_4(sel);
|
|
|
|
switch (w) {
|
|
case WPA_SEL(WPA_CSE_NULL):
|
|
return "NONE";
|
|
case WPA_SEL(WPA_CSE_WEP40):
|
|
return "WEP40";
|
|
case WPA_SEL(WPA_CSE_WEP104):
|
|
return "WEP104";
|
|
case WPA_SEL(WPA_CSE_TKIP):
|
|
return "TKIP";
|
|
case WPA_SEL(WPA_CSE_CCMP):
|
|
return "AES-CCMP";
|
|
}
|
|
return "?"; /* NB: so 1<< is discarded */
|
|
#undef WPA_SEL
|
|
}
|
|
|
|
static const char *
|
|
wpa_keymgmt(const u_int8_t *sel)
|
|
{
|
|
#define WPA_SEL(x) (((x)<<24)|WPA_OUI)
|
|
u_int32_t w = LE_READ_4(sel);
|
|
|
|
switch (w) {
|
|
case WPA_SEL(WPA_ASE_8021X_UNSPEC):
|
|
return "8021X-UNSPEC";
|
|
case WPA_SEL(WPA_ASE_8021X_PSK):
|
|
return "8021X-PSK";
|
|
case WPA_SEL(WPA_ASE_NONE):
|
|
return "NONE";
|
|
}
|
|
return "?";
|
|
#undef WPA_SEL
|
|
}
|
|
|
|
static void
|
|
printwpaie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
u_int8_t len = ie[1];
|
|
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
const char *sep;
|
|
int n;
|
|
|
|
ie += 6, len -= 4; /* NB: len is payload only */
|
|
|
|
printf("<v%u", LE_READ_2(ie));
|
|
ie += 2, len -= 2;
|
|
|
|
printf(" mc:%s", wpa_cipher(ie));
|
|
ie += 4, len -= 4;
|
|
|
|
/* unicast ciphers */
|
|
n = LE_READ_2(ie);
|
|
ie += 2, len -= 2;
|
|
sep = " uc:";
|
|
for (; n > 0; n--) {
|
|
printf("%s%s", sep, wpa_cipher(ie));
|
|
ie += 4, len -= 4;
|
|
sep = "+";
|
|
}
|
|
|
|
/* key management algorithms */
|
|
n = LE_READ_2(ie);
|
|
ie += 2, len -= 2;
|
|
sep = " km:";
|
|
for (; n > 0; n--) {
|
|
printf("%s%s", sep, wpa_keymgmt(ie));
|
|
ie += 4, len -= 4;
|
|
sep = "+";
|
|
}
|
|
|
|
if (len > 2) /* optional capabilities */
|
|
printf(", caps 0x%x", LE_READ_2(ie));
|
|
printf(">");
|
|
}
|
|
}
|
|
|
|
static const char *
|
|
rsn_cipher(const u_int8_t *sel)
|
|
{
|
|
#define RSN_SEL(x) (((x)<<24)|RSN_OUI)
|
|
u_int32_t w = LE_READ_4(sel);
|
|
|
|
switch (w) {
|
|
case RSN_SEL(RSN_CSE_NULL):
|
|
return "NONE";
|
|
case RSN_SEL(RSN_CSE_WEP40):
|
|
return "WEP40";
|
|
case RSN_SEL(RSN_CSE_WEP104):
|
|
return "WEP104";
|
|
case RSN_SEL(RSN_CSE_TKIP):
|
|
return "TKIP";
|
|
case RSN_SEL(RSN_CSE_CCMP):
|
|
return "AES-CCMP";
|
|
case RSN_SEL(RSN_CSE_WRAP):
|
|
return "AES-OCB";
|
|
}
|
|
return "?";
|
|
#undef WPA_SEL
|
|
}
|
|
|
|
static const char *
|
|
rsn_keymgmt(const u_int8_t *sel)
|
|
{
|
|
#define RSN_SEL(x) (((x)<<24)|RSN_OUI)
|
|
u_int32_t w = LE_READ_4(sel);
|
|
|
|
switch (w) {
|
|
case RSN_SEL(RSN_ASE_8021X_UNSPEC):
|
|
return "8021X-UNSPEC";
|
|
case RSN_SEL(RSN_ASE_8021X_PSK):
|
|
return "8021X-PSK";
|
|
case RSN_SEL(RSN_ASE_NONE):
|
|
return "NONE";
|
|
}
|
|
return "?";
|
|
#undef RSN_SEL
|
|
}
|
|
|
|
static void
|
|
printrsnie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
const char *sep;
|
|
int n;
|
|
|
|
ie += 2, ielen -= 2;
|
|
|
|
printf("<v%u", LE_READ_2(ie));
|
|
ie += 2, ielen -= 2;
|
|
|
|
printf(" mc:%s", rsn_cipher(ie));
|
|
ie += 4, ielen -= 4;
|
|
|
|
/* unicast ciphers */
|
|
n = LE_READ_2(ie);
|
|
ie += 2, ielen -= 2;
|
|
sep = " uc:";
|
|
for (; n > 0; n--) {
|
|
printf("%s%s", sep, rsn_cipher(ie));
|
|
ie += 4, ielen -= 4;
|
|
sep = "+";
|
|
}
|
|
|
|
/* key management algorithms */
|
|
n = LE_READ_2(ie);
|
|
ie += 2, ielen -= 2;
|
|
sep = " km:";
|
|
for (; n > 0; n--) {
|
|
printf("%s%s", sep, rsn_keymgmt(ie));
|
|
ie += 4, ielen -= 4;
|
|
sep = "+";
|
|
}
|
|
|
|
if (ielen > 2) /* optional capabilities */
|
|
printf(", caps 0x%x", LE_READ_2(ie));
|
|
/* XXXPMKID */
|
|
printf(">");
|
|
}
|
|
}
|
|
|
|
/* XXX move to a public include file */
|
|
#define IEEE80211_WPS_DEV_PASS_ID 0x1012
|
|
#define IEEE80211_WPS_SELECTED_REG 0x1041
|
|
#define IEEE80211_WPS_SETUP_STATE 0x1044
|
|
#define IEEE80211_WPS_UUID_E 0x1047
|
|
#define IEEE80211_WPS_VERSION 0x104a
|
|
|
|
#define BE_READ_2(p) \
|
|
((u_int16_t) \
|
|
((((const u_int8_t *)(p))[1] ) | \
|
|
(((const u_int8_t *)(p))[0] << 8)))
|
|
|
|
static void
|
|
printwpsie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
#define N(a) (sizeof(a) / sizeof(a[0]))
|
|
u_int8_t len = ie[1];
|
|
|
|
printf("%s", tag);
|
|
if (verbose) {
|
|
static const char *dev_pass_id[] = {
|
|
"D", /* Default (PIN) */
|
|
"U", /* User-specified */
|
|
"M", /* Machine-specified */
|
|
"K", /* Rekey */
|
|
"P", /* PushButton */
|
|
"R" /* Registrar-specified */
|
|
};
|
|
int n;
|
|
|
|
ie +=6, len -= 4; /* NB: len is payload only */
|
|
|
|
/* WPS IE in Beacon and Probe Resp frames have different fields */
|
|
printf("<");
|
|
while (len) {
|
|
uint16_t tlv_type = BE_READ_2(ie);
|
|
uint16_t tlv_len = BE_READ_2(ie + 2);
|
|
|
|
ie += 4, len -= 4;
|
|
|
|
switch (tlv_type) {
|
|
case IEEE80211_WPS_VERSION:
|
|
printf("v:%d.%d", *ie >> 4, *ie & 0xf);
|
|
break;
|
|
case IEEE80211_WPS_SETUP_STATE:
|
|
/* Only 1 and 2 are valid */
|
|
if (*ie == 0 || *ie >= 3)
|
|
printf(" state:B");
|
|
else
|
|
printf(" st:%s", *ie == 1 ? "N" : "C");
|
|
break;
|
|
case IEEE80211_WPS_SELECTED_REG:
|
|
printf(" sel:%s", *ie ? "T" : "F");
|
|
break;
|
|
case IEEE80211_WPS_DEV_PASS_ID:
|
|
n = LE_READ_2(ie);
|
|
if (n < N(dev_pass_id))
|
|
printf(" dpi:%s", dev_pass_id[n]);
|
|
break;
|
|
case IEEE80211_WPS_UUID_E:
|
|
printf(" uuid-e:");
|
|
for (n = 0; n < (tlv_len - 1); n++)
|
|
printf("%02x-", ie[n]);
|
|
printf("%02x", ie[n]);
|
|
break;
|
|
}
|
|
ie += tlv_len, len -= tlv_len;
|
|
}
|
|
printf(">");
|
|
}
|
|
#undef N
|
|
}
|
|
|
|
static void
|
|
printtdmaie(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
printf("%s", tag);
|
|
if (verbose && ielen >= sizeof(struct ieee80211_tdma_param)) {
|
|
const struct ieee80211_tdma_param *tdma =
|
|
(const struct ieee80211_tdma_param *) ie;
|
|
|
|
/* XXX tstamp */
|
|
printf("<v%u slot:%u slotcnt:%u slotlen:%u bintval:%u inuse:0x%x>",
|
|
tdma->tdma_version, tdma->tdma_slot, tdma->tdma_slotcnt,
|
|
LE_READ_2(&tdma->tdma_slotlen), tdma->tdma_bintval,
|
|
tdma->tdma_inuse[0]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Copy the ssid string contents into buf, truncating to fit. If the
|
|
* ssid is entirely printable then just copy intact. Otherwise convert
|
|
* to hexadecimal. If the result is truncated then replace the last
|
|
* three characters with "...".
|
|
*/
|
|
static int
|
|
copy_essid(char buf[], size_t bufsize, const u_int8_t *essid, size_t essid_len)
|
|
{
|
|
const u_int8_t *p;
|
|
size_t maxlen;
|
|
int i;
|
|
|
|
if (essid_len > bufsize)
|
|
maxlen = bufsize;
|
|
else
|
|
maxlen = essid_len;
|
|
/* determine printable or not */
|
|
for (i = 0, p = essid; i < maxlen; i++, p++) {
|
|
if (*p < ' ' || *p > 0x7e)
|
|
break;
|
|
}
|
|
if (i != maxlen) { /* not printable, print as hex */
|
|
if (bufsize < 3)
|
|
return 0;
|
|
strlcpy(buf, "0x", bufsize);
|
|
bufsize -= 2;
|
|
p = essid;
|
|
for (i = 0; i < maxlen && bufsize >= 2; i++) {
|
|
sprintf(&buf[2+2*i], "%02x", p[i]);
|
|
bufsize -= 2;
|
|
}
|
|
if (i != essid_len)
|
|
memcpy(&buf[2+2*i-3], "...", 3);
|
|
} else { /* printable, truncate as needed */
|
|
memcpy(buf, essid, maxlen);
|
|
if (maxlen != essid_len)
|
|
memcpy(&buf[maxlen-3], "...", 3);
|
|
}
|
|
return maxlen;
|
|
}
|
|
|
|
static void
|
|
printssid(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
char ssid[2*IEEE80211_NWID_LEN+1];
|
|
|
|
printf("%s<%.*s>", tag, copy_essid(ssid, maxlen, ie+2, ie[1]), ssid);
|
|
}
|
|
|
|
static void
|
|
printrates(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
const char *sep;
|
|
int i;
|
|
|
|
printf("%s", tag);
|
|
sep = "<";
|
|
for (i = 2; i < ielen; i++) {
|
|
printf("%s%s%d", sep,
|
|
ie[i] & IEEE80211_RATE_BASIC ? "B" : "",
|
|
ie[i] & IEEE80211_RATE_VAL);
|
|
sep = ",";
|
|
}
|
|
printf(">");
|
|
}
|
|
|
|
static void
|
|
printcountry(const char *tag, const u_int8_t *ie, size_t ielen, int maxlen)
|
|
{
|
|
const struct ieee80211_country_ie *cie =
|
|
(const struct ieee80211_country_ie *) ie;
|
|
int i, nbands, schan, nchan;
|
|
|
|
printf("%s<%c%c%c", tag, cie->cc[0], cie->cc[1], cie->cc[2]);
|
|
nbands = (cie->len - 3) / sizeof(cie->band[0]);
|
|
for (i = 0; i < nbands; i++) {
|
|
schan = cie->band[i].schan;
|
|
nchan = cie->band[i].nchan;
|
|
if (nchan != 1)
|
|
printf(" %u-%u,%u", schan, schan + nchan-1,
|
|
cie->band[i].maxtxpwr);
|
|
else
|
|
printf(" %u,%u", schan, cie->band[i].maxtxpwr);
|
|
}
|
|
printf(">");
|
|
}
|
|
|
|
/* unaligned little endian access */
|
|
#define LE_READ_4(p) \
|
|
((u_int32_t) \
|
|
((((const u_int8_t *)(p))[0] ) | \
|
|
(((const u_int8_t *)(p))[1] << 8) | \
|
|
(((const u_int8_t *)(p))[2] << 16) | \
|
|
(((const u_int8_t *)(p))[3] << 24)))
|
|
|
|
static __inline int
|
|
iswpaoui(const u_int8_t *frm)
|
|
{
|
|
return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
|
|
}
|
|
|
|
static __inline int
|
|
iswmeinfo(const u_int8_t *frm)
|
|
{
|
|
return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
|
|
frm[6] == WME_INFO_OUI_SUBTYPE;
|
|
}
|
|
|
|
static __inline int
|
|
iswmeparam(const u_int8_t *frm)
|
|
{
|
|
return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
|
|
frm[6] == WME_PARAM_OUI_SUBTYPE;
|
|
}
|
|
|
|
static __inline int
|
|
isatherosoui(const u_int8_t *frm)
|
|
{
|
|
return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
|
|
}
|
|
|
|
static __inline int
|
|
istdmaoui(const uint8_t *frm)
|
|
{
|
|
return frm[1] > 3 && LE_READ_4(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI);
|
|
}
|
|
|
|
static __inline int
|
|
iswpsoui(const uint8_t *frm)
|
|
{
|
|
return frm[1] > 3 && LE_READ_4(frm+2) == ((WPS_OUI_TYPE<<24)|WPA_OUI);
|
|
}
|
|
|
|
static const char *
|
|
iename(int elemid)
|
|
{
|
|
switch (elemid) {
|
|
case IEEE80211_ELEMID_FHPARMS: return " FHPARMS";
|
|
case IEEE80211_ELEMID_CFPARMS: return " CFPARMS";
|
|
case IEEE80211_ELEMID_TIM: return " TIM";
|
|
case IEEE80211_ELEMID_IBSSPARMS:return " IBSSPARMS";
|
|
case IEEE80211_ELEMID_CHALLENGE:return " CHALLENGE";
|
|
case IEEE80211_ELEMID_PWRCNSTR: return " PWRCNSTR";
|
|
case IEEE80211_ELEMID_PWRCAP: return " PWRCAP";
|
|
case IEEE80211_ELEMID_TPCREQ: return " TPCREQ";
|
|
case IEEE80211_ELEMID_TPCREP: return " TPCREP";
|
|
case IEEE80211_ELEMID_SUPPCHAN: return " SUPPCHAN";
|
|
case IEEE80211_ELEMID_CSA: return " CSA";
|
|
case IEEE80211_ELEMID_MEASREQ: return " MEASREQ";
|
|
case IEEE80211_ELEMID_MEASREP: return " MEASREP";
|
|
case IEEE80211_ELEMID_QUIET: return " QUIET";
|
|
case IEEE80211_ELEMID_IBSSDFS: return " IBSSDFS";
|
|
case IEEE80211_ELEMID_TPC: return " TPC";
|
|
case IEEE80211_ELEMID_CCKM: return " CCKM";
|
|
}
|
|
return " ???";
|
|
}
|
|
|
|
static void
|
|
printies(const u_int8_t *vp, int ielen, int maxcols)
|
|
{
|
|
while (ielen > 0) {
|
|
switch (vp[0]) {
|
|
case IEEE80211_ELEMID_SSID:
|
|
if (verbose)
|
|
printssid(" SSID", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_RATES:
|
|
case IEEE80211_ELEMID_XRATES:
|
|
if (verbose)
|
|
printrates(vp[0] == IEEE80211_ELEMID_RATES ?
|
|
" RATES" : " XRATES", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_DSPARMS:
|
|
if (verbose)
|
|
printf(" DSPARMS<%u>", vp[2]);
|
|
break;
|
|
case IEEE80211_ELEMID_COUNTRY:
|
|
if (verbose)
|
|
printcountry(" COUNTRY", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_ERP:
|
|
if (verbose)
|
|
printf(" ERP<0x%x>", vp[2]);
|
|
break;
|
|
case IEEE80211_ELEMID_VENDOR:
|
|
if (iswpaoui(vp))
|
|
printwpaie(" WPA", vp, 2+vp[1], maxcols);
|
|
else if (iswmeinfo(vp))
|
|
printwmeinfo(" WME", vp, 2+vp[1], maxcols);
|
|
else if (iswmeparam(vp))
|
|
printwmeparam(" WME", vp, 2+vp[1], maxcols);
|
|
else if (isatherosoui(vp))
|
|
printathie(" ATH", vp, 2+vp[1], maxcols);
|
|
else if (iswpsoui(vp))
|
|
printwpsie(" WPS", vp, 2+vp[1], maxcols);
|
|
else if (istdmaoui(vp))
|
|
printtdmaie(" TDMA", vp, 2+vp[1], maxcols);
|
|
else if (verbose)
|
|
printie(" VEN", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_RSN:
|
|
printrsnie(" RSN", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_HTCAP:
|
|
printhtcap(" HTCAP", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_HTINFO:
|
|
if (verbose)
|
|
printhtinfo(" HTINFO", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_MESHID:
|
|
if (verbose)
|
|
printssid(" MESHID", vp, 2+vp[1], maxcols);
|
|
break;
|
|
case IEEE80211_ELEMID_MESHCONF:
|
|
printmeshconf(" MESHCONF", vp, 2+vp[1], maxcols);
|
|
break;
|
|
default:
|
|
if (verbose)
|
|
printie(iename(vp[0]), vp, 2+vp[1], maxcols);
|
|
break;
|
|
}
|
|
ielen -= 2+vp[1];
|
|
vp += 2+vp[1];
|
|
}
|
|
}
|
|
|
|
static void
|
|
printmimo(const struct ieee80211_mimo_info *mi)
|
|
{
|
|
/* NB: don't muddy display unless there's something to show */
|
|
if (mi->rssi[0] != 0 || mi->rssi[1] != 0 || mi->rssi[2] != 0) {
|
|
/* XXX ignore EVM for now */
|
|
printf(" (rssi %d:%d:%d nf %d:%d:%d)",
|
|
mi->rssi[0], mi->rssi[1], mi->rssi[2],
|
|
mi->noise[0], mi->noise[1], mi->noise[2]);
|
|
}
|
|
}
|
|
|
|
static void
|
|
list_scan(int s)
|
|
{
|
|
uint8_t buf[24*1024];
|
|
char ssid[IEEE80211_NWID_LEN+1];
|
|
const uint8_t *cp;
|
|
int len, ssidmax, idlen;
|
|
|
|
if (get80211len(s, IEEE80211_IOC_SCAN_RESULTS, buf, sizeof(buf), &len) < 0)
|
|
errx(1, "unable to get scan results");
|
|
if (len < sizeof(struct ieee80211req_scan_result))
|
|
return;
|
|
|
|
getchaninfo(s);
|
|
|
|
ssidmax = verbose ? IEEE80211_NWID_LEN - 1 : 14;
|
|
printf("%-*.*s %-17.17s %4s %4s %-7s %3s %4s\n"
|
|
, ssidmax, ssidmax, "SSID/MESH ID"
|
|
, "BSSID"
|
|
, "CHAN"
|
|
, "RATE"
|
|
, " S:N"
|
|
, "INT"
|
|
, "CAPS"
|
|
);
|
|
cp = buf;
|
|
do {
|
|
const struct ieee80211req_scan_result *sr;
|
|
const uint8_t *vp, *idp;
|
|
|
|
sr = (const struct ieee80211req_scan_result *) cp;
|
|
vp = cp + sr->isr_ie_off;
|
|
if (sr->isr_meshid_len) {
|
|
idp = vp + sr->isr_ssid_len;
|
|
idlen = sr->isr_meshid_len;
|
|
} else {
|
|
idp = vp;
|
|
idlen = sr->isr_ssid_len;
|
|
}
|
|
printf("%-*.*s %s %3d %3dM %3d:%-3d %3d %-4.4s"
|
|
, ssidmax
|
|
, copy_essid(ssid, ssidmax, idp, idlen)
|
|
, ssid
|
|
, ether_ntoa((const struct ether_addr *) sr->isr_bssid)
|
|
, ieee80211_mhz2ieee(sr->isr_freq, sr->isr_flags)
|
|
, getmaxrate(sr->isr_rates, sr->isr_nrates)
|
|
, (sr->isr_rssi/2)+sr->isr_noise, sr->isr_noise
|
|
, sr->isr_intval
|
|
, getcaps(sr->isr_capinfo)
|
|
);
|
|
printies(vp + sr->isr_ssid_len + sr->isr_meshid_len,
|
|
sr->isr_ie_len, 24);
|
|
printf("\n");
|
|
cp += sr->isr_len, len -= sr->isr_len;
|
|
} while (len >= sizeof(struct ieee80211req_scan_result));
|
|
}
|
|
|
|
static void
|
|
scan_and_wait(int s)
|
|
{
|
|
struct ieee80211_scan_req sr;
|
|
struct ieee80211req ireq;
|
|
int sroute;
|
|
|
|
sroute = socket(PF_ROUTE, SOCK_RAW, 0);
|
|
if (sroute < 0) {
|
|
perror("socket(PF_ROUTE,SOCK_RAW)");
|
|
return;
|
|
}
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = IEEE80211_IOC_SCAN_REQ;
|
|
|
|
memset(&sr, 0, sizeof(sr));
|
|
sr.sr_flags = IEEE80211_IOC_SCAN_ACTIVE
|
|
| IEEE80211_IOC_SCAN_NOPICK
|
|
| IEEE80211_IOC_SCAN_ONCE;
|
|
sr.sr_duration = IEEE80211_IOC_SCAN_FOREVER;
|
|
sr.sr_nssid = 0;
|
|
|
|
ireq.i_data = &sr;
|
|
ireq.i_len = sizeof(sr);
|
|
/* NB: only root can trigger a scan so ignore errors */
|
|
if (ioctl(s, SIOCS80211, &ireq) >= 0) {
|
|
char buf[2048];
|
|
struct if_announcemsghdr *ifan;
|
|
struct rt_msghdr *rtm;
|
|
|
|
do {
|
|
if (read(sroute, buf, sizeof(buf)) < 0) {
|
|
perror("read(PF_ROUTE)");
|
|
break;
|
|
}
|
|
rtm = (struct rt_msghdr *) buf;
|
|
if (rtm->rtm_version != RTM_VERSION)
|
|
break;
|
|
ifan = (struct if_announcemsghdr *) rtm;
|
|
} while (rtm->rtm_type != RTM_IEEE80211 ||
|
|
ifan->ifan_what != RTM_IEEE80211_SCAN);
|
|
}
|
|
close(sroute);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211scan, val, d)
|
|
{
|
|
scan_and_wait(s);
|
|
list_scan(s);
|
|
}
|
|
|
|
static enum ieee80211_opmode get80211opmode(int s);
|
|
|
|
static int
|
|
gettxseq(const struct ieee80211req_sta_info *si)
|
|
{
|
|
int i, txseq;
|
|
|
|
if ((si->isi_state & IEEE80211_NODE_QOS) == 0)
|
|
return si->isi_txseqs[0];
|
|
/* XXX not right but usually what folks want */
|
|
txseq = 0;
|
|
for (i = 0; i < IEEE80211_TID_SIZE; i++)
|
|
if (si->isi_txseqs[i] > txseq)
|
|
txseq = si->isi_txseqs[i];
|
|
return txseq;
|
|
}
|
|
|
|
static int
|
|
getrxseq(const struct ieee80211req_sta_info *si)
|
|
{
|
|
int i, rxseq;
|
|
|
|
if ((si->isi_state & IEEE80211_NODE_QOS) == 0)
|
|
return si->isi_rxseqs[0];
|
|
/* XXX not right but usually what folks want */
|
|
rxseq = 0;
|
|
for (i = 0; i < IEEE80211_TID_SIZE; i++)
|
|
if (si->isi_rxseqs[i] > rxseq)
|
|
rxseq = si->isi_rxseqs[i];
|
|
return rxseq;
|
|
}
|
|
|
|
static void
|
|
list_stations(int s)
|
|
{
|
|
union {
|
|
struct ieee80211req_sta_req req;
|
|
uint8_t buf[24*1024];
|
|
} u;
|
|
enum ieee80211_opmode opmode = get80211opmode(s);
|
|
const uint8_t *cp;
|
|
int len;
|
|
|
|
/* broadcast address =>'s get all stations */
|
|
(void) memset(u.req.is_u.macaddr, 0xff, IEEE80211_ADDR_LEN);
|
|
if (opmode == IEEE80211_M_STA) {
|
|
/*
|
|
* Get information about the associated AP.
|
|
*/
|
|
(void) get80211(s, IEEE80211_IOC_BSSID,
|
|
u.req.is_u.macaddr, IEEE80211_ADDR_LEN);
|
|
}
|
|
if (get80211len(s, IEEE80211_IOC_STA_INFO, &u, sizeof(u), &len) < 0)
|
|
errx(1, "unable to get station information");
|
|
if (len < sizeof(struct ieee80211req_sta_info))
|
|
return;
|
|
|
|
getchaninfo(s);
|
|
|
|
if (opmode == IEEE80211_M_MBSS)
|
|
printf("%-17.17s %4s %5s %5s %7s %4s %4s %4s %6s %6s\n"
|
|
, "ADDR"
|
|
, "CHAN"
|
|
, "LOCAL"
|
|
, "PEER"
|
|
, "STATE"
|
|
, "RATE"
|
|
, "RSSI"
|
|
, "IDLE"
|
|
, "TXSEQ"
|
|
, "RXSEQ"
|
|
);
|
|
else
|
|
printf("%-17.17s %4s %4s %4s %4s %4s %6s %6s %4s %-7s\n"
|
|
, "ADDR"
|
|
, "AID"
|
|
, "CHAN"
|
|
, "RATE"
|
|
, "RSSI"
|
|
, "IDLE"
|
|
, "TXSEQ"
|
|
, "RXSEQ"
|
|
, "CAPS"
|
|
, "FLAG"
|
|
);
|
|
cp = (const uint8_t *) u.req.info;
|
|
do {
|
|
const struct ieee80211req_sta_info *si;
|
|
|
|
si = (const struct ieee80211req_sta_info *) cp;
|
|
if (si->isi_len < sizeof(*si))
|
|
break;
|
|
if (opmode == IEEE80211_M_MBSS)
|
|
printf("%s %4d %5x %5x %7.7s %3dM %4.1f %4d %6d %6d"
|
|
, ether_ntoa((const struct ether_addr*)
|
|
si->isi_macaddr)
|
|
, ieee80211_mhz2ieee(si->isi_freq,
|
|
si->isi_flags)
|
|
, si->isi_localid
|
|
, si->isi_peerid
|
|
, mesh_linkstate_string(si->isi_peerstate)
|
|
, si->isi_txmbps/2
|
|
, si->isi_rssi/2.
|
|
, si->isi_inact
|
|
, gettxseq(si)
|
|
, getrxseq(si)
|
|
);
|
|
else
|
|
printf("%s %4u %4d %3dM %4.1f %4d %6d %6d %-4.4s %-7.7s"
|
|
, ether_ntoa((const struct ether_addr*)
|
|
si->isi_macaddr)
|
|
, IEEE80211_AID(si->isi_associd)
|
|
, ieee80211_mhz2ieee(si->isi_freq,
|
|
si->isi_flags)
|
|
, si->isi_txmbps/2
|
|
, si->isi_rssi/2.
|
|
, si->isi_inact
|
|
, gettxseq(si)
|
|
, getrxseq(si)
|
|
, getcaps(si->isi_capinfo)
|
|
, getflags(si->isi_state)
|
|
);
|
|
printies(cp + si->isi_ie_off, si->isi_ie_len, 24);
|
|
printmimo(&si->isi_mimo);
|
|
printf("\n");
|
|
cp += si->isi_len, len -= si->isi_len;
|
|
} while (len >= sizeof(struct ieee80211req_sta_info));
|
|
}
|
|
|
|
static const char *
|
|
mesh_linkstate_string(uint8_t state)
|
|
{
|
|
#define N(a) (sizeof(a) / sizeof(a[0]))
|
|
static const char *state_names[] = {
|
|
[0] = "IDLE",
|
|
[1] = "OPEN-TX",
|
|
[2] = "OPEN-RX",
|
|
[3] = "CONF-RX",
|
|
[4] = "ESTAB",
|
|
[5] = "HOLDING",
|
|
};
|
|
|
|
if (state >= N(state_names)) {
|
|
static char buf[10];
|
|
snprintf(buf, sizeof(buf), "#%u", state);
|
|
return buf;
|
|
} else
|
|
return state_names[state];
|
|
#undef N
|
|
}
|
|
|
|
static const char *
|
|
get_chaninfo(const struct ieee80211_channel *c, int precise,
|
|
char buf[], size_t bsize)
|
|
{
|
|
buf[0] = '\0';
|
|
if (IEEE80211_IS_CHAN_FHSS(c))
|
|
strlcat(buf, " FHSS", bsize);
|
|
if (IEEE80211_IS_CHAN_A(c))
|
|
strlcat(buf, " 11a", bsize);
|
|
else if (IEEE80211_IS_CHAN_ANYG(c))
|
|
strlcat(buf, " 11g", bsize);
|
|
else if (IEEE80211_IS_CHAN_B(c))
|
|
strlcat(buf, " 11b", bsize);
|
|
if (IEEE80211_IS_CHAN_HALF(c))
|
|
strlcat(buf, "/10Mhz", bsize);
|
|
if (IEEE80211_IS_CHAN_QUARTER(c))
|
|
strlcat(buf, "/5Mhz", bsize);
|
|
if (IEEE80211_IS_CHAN_TURBO(c))
|
|
strlcat(buf, " Turbo", bsize);
|
|
if (precise) {
|
|
if (IEEE80211_IS_CHAN_HT20(c))
|
|
strlcat(buf, " ht/20", bsize);
|
|
else if (IEEE80211_IS_CHAN_HT40D(c))
|
|
strlcat(buf, " ht/40-", bsize);
|
|
else if (IEEE80211_IS_CHAN_HT40U(c))
|
|
strlcat(buf, " ht/40+", bsize);
|
|
} else {
|
|
if (IEEE80211_IS_CHAN_HT(c))
|
|
strlcat(buf, " ht", bsize);
|
|
}
|
|
return buf;
|
|
}
|
|
|
|
static void
|
|
print_chaninfo(const struct ieee80211_channel *c, int verb)
|
|
{
|
|
char buf[14];
|
|
|
|
printf("Channel %3u : %u%c Mhz%-14.14s",
|
|
ieee80211_mhz2ieee(c->ic_freq, c->ic_flags), c->ic_freq,
|
|
IEEE80211_IS_CHAN_PASSIVE(c) ? '*' : ' ',
|
|
get_chaninfo(c, verb, buf, sizeof(buf)));
|
|
}
|
|
|
|
static int
|
|
chanpref(const struct ieee80211_channel *c)
|
|
{
|
|
if (IEEE80211_IS_CHAN_HT40(c))
|
|
return 40;
|
|
if (IEEE80211_IS_CHAN_HT20(c))
|
|
return 30;
|
|
if (IEEE80211_IS_CHAN_HALF(c))
|
|
return 10;
|
|
if (IEEE80211_IS_CHAN_QUARTER(c))
|
|
return 5;
|
|
if (IEEE80211_IS_CHAN_TURBO(c))
|
|
return 25;
|
|
if (IEEE80211_IS_CHAN_A(c))
|
|
return 20;
|
|
if (IEEE80211_IS_CHAN_G(c))
|
|
return 20;
|
|
if (IEEE80211_IS_CHAN_B(c))
|
|
return 15;
|
|
if (IEEE80211_IS_CHAN_PUREG(c))
|
|
return 15;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
print_channels(int s, const struct ieee80211req_chaninfo *chans,
|
|
int allchans, int verb)
|
|
{
|
|
struct ieee80211req_chaninfo *achans;
|
|
uint8_t reported[IEEE80211_CHAN_BYTES];
|
|
const struct ieee80211_channel *c;
|
|
int i, half;
|
|
|
|
achans = malloc(IEEE80211_CHANINFO_SPACE(chans));
|
|
if (achans == NULL)
|
|
errx(1, "no space for active channel list");
|
|
achans->ic_nchans = 0;
|
|
memset(reported, 0, sizeof(reported));
|
|
if (!allchans) {
|
|
struct ieee80211req_chanlist active;
|
|
|
|
if (get80211(s, IEEE80211_IOC_CHANLIST, &active, sizeof(active)) < 0)
|
|
errx(1, "unable to get active channel list");
|
|
for (i = 0; i < chans->ic_nchans; i++) {
|
|
c = &chans->ic_chans[i];
|
|
if (!isset(active.ic_channels, c->ic_ieee))
|
|
continue;
|
|
/*
|
|
* Suppress compatible duplicates unless
|
|
* verbose. The kernel gives us it's
|
|
* complete channel list which has separate
|
|
* entries for 11g/11b and 11a/turbo.
|
|
*/
|
|
if (isset(reported, c->ic_ieee) && !verb) {
|
|
/* XXX we assume duplicates are adjacent */
|
|
achans->ic_chans[achans->ic_nchans-1] = *c;
|
|
} else {
|
|
achans->ic_chans[achans->ic_nchans++] = *c;
|
|
setbit(reported, c->ic_ieee);
|
|
}
|
|
}
|
|
} else {
|
|
for (i = 0; i < chans->ic_nchans; i++) {
|
|
c = &chans->ic_chans[i];
|
|
/* suppress duplicates as above */
|
|
if (isset(reported, c->ic_ieee) && !verb) {
|
|
/* XXX we assume duplicates are adjacent */
|
|
struct ieee80211_channel *a =
|
|
&achans->ic_chans[achans->ic_nchans-1];
|
|
if (chanpref(c) > chanpref(a))
|
|
*a = *c;
|
|
} else {
|
|
achans->ic_chans[achans->ic_nchans++] = *c;
|
|
setbit(reported, c->ic_ieee);
|
|
}
|
|
}
|
|
}
|
|
half = achans->ic_nchans / 2;
|
|
if (achans->ic_nchans % 2)
|
|
half++;
|
|
|
|
for (i = 0; i < achans->ic_nchans / 2; i++) {
|
|
print_chaninfo(&achans->ic_chans[i], verb);
|
|
print_chaninfo(&achans->ic_chans[half+i], verb);
|
|
printf("\n");
|
|
}
|
|
if (achans->ic_nchans % 2) {
|
|
print_chaninfo(&achans->ic_chans[i], verb);
|
|
printf("\n");
|
|
}
|
|
free(achans);
|
|
}
|
|
|
|
static void
|
|
list_channels(int s, int allchans)
|
|
{
|
|
getchaninfo(s);
|
|
print_channels(s, chaninfo, allchans, verbose);
|
|
}
|
|
|
|
static void
|
|
print_txpow(const struct ieee80211_channel *c)
|
|
{
|
|
printf("Channel %3u : %u Mhz %3.1f reg %2d ",
|
|
c->ic_ieee, c->ic_freq,
|
|
c->ic_maxpower/2., c->ic_maxregpower);
|
|
}
|
|
|
|
static void
|
|
print_txpow_verbose(const struct ieee80211_channel *c)
|
|
{
|
|
print_chaninfo(c, 1);
|
|
printf("min %4.1f dBm max %3.1f dBm reg %2d dBm",
|
|
c->ic_minpower/2., c->ic_maxpower/2., c->ic_maxregpower);
|
|
/* indicate where regulatory cap limits power use */
|
|
if (c->ic_maxpower > 2*c->ic_maxregpower)
|
|
printf(" <");
|
|
}
|
|
|
|
static void
|
|
list_txpow(int s)
|
|
{
|
|
struct ieee80211req_chaninfo *achans;
|
|
uint8_t reported[IEEE80211_CHAN_BYTES];
|
|
struct ieee80211_channel *c, *prev;
|
|
int i, half;
|
|
|
|
getchaninfo(s);
|
|
achans = malloc(IEEE80211_CHANINFO_SPACE(chaninfo));
|
|
if (achans == NULL)
|
|
errx(1, "no space for active channel list");
|
|
achans->ic_nchans = 0;
|
|
memset(reported, 0, sizeof(reported));
|
|
for (i = 0; i < chaninfo->ic_nchans; i++) {
|
|
c = &chaninfo->ic_chans[i];
|
|
/* suppress duplicates as above */
|
|
if (isset(reported, c->ic_ieee) && !verbose) {
|
|
/* XXX we assume duplicates are adjacent */
|
|
prev = &achans->ic_chans[achans->ic_nchans-1];
|
|
/* display highest power on channel */
|
|
if (c->ic_maxpower > prev->ic_maxpower)
|
|
*prev = *c;
|
|
} else {
|
|
achans->ic_chans[achans->ic_nchans++] = *c;
|
|
setbit(reported, c->ic_ieee);
|
|
}
|
|
}
|
|
if (!verbose) {
|
|
half = achans->ic_nchans / 2;
|
|
if (achans->ic_nchans % 2)
|
|
half++;
|
|
|
|
for (i = 0; i < achans->ic_nchans / 2; i++) {
|
|
print_txpow(&achans->ic_chans[i]);
|
|
print_txpow(&achans->ic_chans[half+i]);
|
|
printf("\n");
|
|
}
|
|
if (achans->ic_nchans % 2) {
|
|
print_txpow(&achans->ic_chans[i]);
|
|
printf("\n");
|
|
}
|
|
} else {
|
|
for (i = 0; i < achans->ic_nchans; i++) {
|
|
print_txpow_verbose(&achans->ic_chans[i]);
|
|
printf("\n");
|
|
}
|
|
}
|
|
free(achans);
|
|
}
|
|
|
|
static void
|
|
list_keys(int s)
|
|
{
|
|
}
|
|
|
|
#define IEEE80211_C_BITS \
|
|
"\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \
|
|
"\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \
|
|
"\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
|
|
"\37TXFRAG\40TDMA"
|
|
|
|
static void
|
|
list_capabilities(int s)
|
|
{
|
|
struct ieee80211_devcaps_req *dc;
|
|
|
|
if (verbose)
|
|
dc = malloc(IEEE80211_DEVCAPS_SIZE(MAXCHAN));
|
|
else
|
|
dc = malloc(IEEE80211_DEVCAPS_SIZE(1));
|
|
if (dc == NULL)
|
|
errx(1, "no space for device capabilities");
|
|
dc->dc_chaninfo.ic_nchans = verbose ? MAXCHAN : 1;
|
|
getdevcaps(s, dc);
|
|
printb("drivercaps", dc->dc_drivercaps, IEEE80211_C_BITS);
|
|
if (dc->dc_cryptocaps != 0 || verbose) {
|
|
putchar('\n');
|
|
printb("cryptocaps", dc->dc_cryptocaps, IEEE80211_CRYPTO_BITS);
|
|
}
|
|
if (dc->dc_htcaps != 0 || verbose) {
|
|
putchar('\n');
|
|
printb("htcaps", dc->dc_htcaps, IEEE80211_HTCAP_BITS);
|
|
}
|
|
putchar('\n');
|
|
if (verbose) {
|
|
chaninfo = &dc->dc_chaninfo; /* XXX */
|
|
print_channels(s, &dc->dc_chaninfo, 1/*allchans*/, verbose);
|
|
}
|
|
free(dc);
|
|
}
|
|
|
|
static int
|
|
get80211wme(int s, int param, int ac, int *val)
|
|
{
|
|
struct ieee80211req ireq;
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = param;
|
|
ireq.i_len = ac;
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0) {
|
|
warn("cannot get WME parameter %d, ac %d%s",
|
|
param, ac & IEEE80211_WMEPARAM_VAL,
|
|
ac & IEEE80211_WMEPARAM_BSS ? " (BSS)" : "");
|
|
return -1;
|
|
}
|
|
*val = ireq.i_val;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
list_wme_aci(int s, const char *tag, int ac)
|
|
{
|
|
int val;
|
|
|
|
printf("\t%s", tag);
|
|
|
|
/* show WME BSS parameters */
|
|
if (get80211wme(s, IEEE80211_IOC_WME_CWMIN, ac, &val) != -1)
|
|
printf(" cwmin %2u", val);
|
|
if (get80211wme(s, IEEE80211_IOC_WME_CWMAX, ac, &val) != -1)
|
|
printf(" cwmax %2u", val);
|
|
if (get80211wme(s, IEEE80211_IOC_WME_AIFS, ac, &val) != -1)
|
|
printf(" aifs %2u", val);
|
|
if (get80211wme(s, IEEE80211_IOC_WME_TXOPLIMIT, ac, &val) != -1)
|
|
printf(" txopLimit %3u", val);
|
|
if (get80211wme(s, IEEE80211_IOC_WME_ACM, ac, &val) != -1) {
|
|
if (val)
|
|
printf(" acm");
|
|
else if (verbose)
|
|
printf(" -acm");
|
|
}
|
|
/* !BSS only */
|
|
if ((ac & IEEE80211_WMEPARAM_BSS) == 0) {
|
|
if (get80211wme(s, IEEE80211_IOC_WME_ACKPOLICY, ac, &val) != -1) {
|
|
if (!val)
|
|
printf(" -ack");
|
|
else if (verbose)
|
|
printf(" ack");
|
|
}
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
static void
|
|
list_wme(int s)
|
|
{
|
|
static const char *acnames[] = { "AC_BE", "AC_BK", "AC_VI", "AC_VO" };
|
|
int ac;
|
|
|
|
if (verbose) {
|
|
/* display both BSS and local settings */
|
|
for (ac = WME_AC_BE; ac <= WME_AC_VO; ac++) {
|
|
again:
|
|
if (ac & IEEE80211_WMEPARAM_BSS)
|
|
list_wme_aci(s, " ", ac);
|
|
else
|
|
list_wme_aci(s, acnames[ac], ac);
|
|
if ((ac & IEEE80211_WMEPARAM_BSS) == 0) {
|
|
ac |= IEEE80211_WMEPARAM_BSS;
|
|
goto again;
|
|
} else
|
|
ac &= ~IEEE80211_WMEPARAM_BSS;
|
|
}
|
|
} else {
|
|
/* display only channel settings */
|
|
for (ac = WME_AC_BE; ac <= WME_AC_VO; ac++)
|
|
list_wme_aci(s, acnames[ac], ac);
|
|
}
|
|
}
|
|
|
|
static void
|
|
list_roam(int s)
|
|
{
|
|
const struct ieee80211_roamparam *rp;
|
|
int mode;
|
|
|
|
getroam(s);
|
|
for (mode = IEEE80211_MODE_11A; mode < IEEE80211_MODE_MAX; mode++) {
|
|
rp = &roamparams.params[mode];
|
|
if (rp->rssi == 0 && rp->rate == 0)
|
|
continue;
|
|
if (mode == IEEE80211_MODE_11NA || mode == IEEE80211_MODE_11NG) {
|
|
if (rp->rssi & 1)
|
|
LINE_CHECK("roam:%-7.7s rssi %2u.5dBm MCS %2u ",
|
|
modename[mode], rp->rssi/2,
|
|
rp->rate &~ IEEE80211_RATE_MCS);
|
|
else
|
|
LINE_CHECK("roam:%-7.7s rssi %4udBm MCS %2u ",
|
|
modename[mode], rp->rssi/2,
|
|
rp->rate &~ IEEE80211_RATE_MCS);
|
|
} else {
|
|
if (rp->rssi & 1)
|
|
LINE_CHECK("roam:%-7.7s rssi %2u.5dBm rate %2u Mb/s",
|
|
modename[mode], rp->rssi/2, rp->rate/2);
|
|
else
|
|
LINE_CHECK("roam:%-7.7s rssi %4udBm rate %2u Mb/s",
|
|
modename[mode], rp->rssi/2, rp->rate/2);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
list_txparams(int s)
|
|
{
|
|
const struct ieee80211_txparam *tp;
|
|
int mode;
|
|
|
|
gettxparams(s);
|
|
for (mode = IEEE80211_MODE_11A; mode < IEEE80211_MODE_MAX; mode++) {
|
|
tp = &txparams.params[mode];
|
|
if (tp->mgmtrate == 0 && tp->mcastrate == 0)
|
|
continue;
|
|
if (mode == IEEE80211_MODE_11NA || mode == IEEE80211_MODE_11NG) {
|
|
if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
|
|
LINE_CHECK("%-7.7s ucast NONE mgmt %2u MCS "
|
|
"mcast %2u MCS maxretry %u",
|
|
modename[mode],
|
|
tp->mgmtrate &~ IEEE80211_RATE_MCS,
|
|
tp->mcastrate &~ IEEE80211_RATE_MCS,
|
|
tp->maxretry);
|
|
else
|
|
LINE_CHECK("%-7.7s ucast %2u MCS mgmt %2u MCS "
|
|
"mcast %2u MCS maxretry %u",
|
|
modename[mode],
|
|
tp->ucastrate &~ IEEE80211_RATE_MCS,
|
|
tp->mgmtrate &~ IEEE80211_RATE_MCS,
|
|
tp->mcastrate &~ IEEE80211_RATE_MCS,
|
|
tp->maxretry);
|
|
} else {
|
|
if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE)
|
|
LINE_CHECK("%-7.7s ucast NONE mgmt %2u Mb/s "
|
|
"mcast %2u Mb/s maxretry %u",
|
|
modename[mode],
|
|
tp->mgmtrate/2,
|
|
tp->mcastrate/2, tp->maxretry);
|
|
else
|
|
LINE_CHECK("%-7.7s ucast %2u Mb/s mgmt %2u Mb/s "
|
|
"mcast %2u Mb/s maxretry %u",
|
|
modename[mode],
|
|
tp->ucastrate/2, tp->mgmtrate/2,
|
|
tp->mcastrate/2, tp->maxretry);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
printpolicy(int policy)
|
|
{
|
|
switch (policy) {
|
|
case IEEE80211_MACCMD_POLICY_OPEN:
|
|
printf("policy: open\n");
|
|
break;
|
|
case IEEE80211_MACCMD_POLICY_ALLOW:
|
|
printf("policy: allow\n");
|
|
break;
|
|
case IEEE80211_MACCMD_POLICY_DENY:
|
|
printf("policy: deny\n");
|
|
break;
|
|
case IEEE80211_MACCMD_POLICY_RADIUS:
|
|
printf("policy: radius\n");
|
|
break;
|
|
default:
|
|
printf("policy: unknown (%u)\n", policy);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
list_mac(int s)
|
|
{
|
|
struct ieee80211req ireq;
|
|
struct ieee80211req_maclist *acllist;
|
|
int i, nacls, policy, len;
|
|
uint8_t *data;
|
|
char c;
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name)); /* XXX ?? */
|
|
ireq.i_type = IEEE80211_IOC_MACCMD;
|
|
ireq.i_val = IEEE80211_MACCMD_POLICY;
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0) {
|
|
if (errno == EINVAL) {
|
|
printf("No acl policy loaded\n");
|
|
return;
|
|
}
|
|
err(1, "unable to get mac policy");
|
|
}
|
|
policy = ireq.i_val;
|
|
if (policy == IEEE80211_MACCMD_POLICY_OPEN) {
|
|
c = '*';
|
|
} else if (policy == IEEE80211_MACCMD_POLICY_ALLOW) {
|
|
c = '+';
|
|
} else if (policy == IEEE80211_MACCMD_POLICY_DENY) {
|
|
c = '-';
|
|
} else if (policy == IEEE80211_MACCMD_POLICY_RADIUS) {
|
|
c = 'r'; /* NB: should never have entries */
|
|
} else {
|
|
printf("policy: unknown (%u)\n", policy);
|
|
c = '?';
|
|
}
|
|
if (verbose || c == '?')
|
|
printpolicy(policy);
|
|
|
|
ireq.i_val = IEEE80211_MACCMD_LIST;
|
|
ireq.i_len = 0;
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0)
|
|
err(1, "unable to get mac acl list size");
|
|
if (ireq.i_len == 0) { /* NB: no acls */
|
|
if (!(verbose || c == '?'))
|
|
printpolicy(policy);
|
|
return;
|
|
}
|
|
len = ireq.i_len;
|
|
|
|
data = malloc(len);
|
|
if (data == NULL)
|
|
err(1, "out of memory for acl list");
|
|
|
|
ireq.i_data = data;
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0)
|
|
err(1, "unable to get mac acl list");
|
|
nacls = len / sizeof(*acllist);
|
|
acllist = (struct ieee80211req_maclist *) data;
|
|
for (i = 0; i < nacls; i++)
|
|
printf("%c%s\n", c, ether_ntoa(
|
|
(const struct ether_addr *) acllist[i].ml_macaddr));
|
|
free(data);
|
|
}
|
|
|
|
static void
|
|
print_regdomain(const struct ieee80211_regdomain *reg, int verb)
|
|
{
|
|
if ((reg->regdomain != 0 &&
|
|
reg->regdomain != reg->country) || verb) {
|
|
const struct regdomain *rd =
|
|
lib80211_regdomain_findbysku(getregdata(), reg->regdomain);
|
|
if (rd == NULL)
|
|
LINE_CHECK("regdomain %d", reg->regdomain);
|
|
else
|
|
LINE_CHECK("regdomain %s", rd->name);
|
|
}
|
|
if (reg->country != 0 || verb) {
|
|
const struct country *cc =
|
|
lib80211_country_findbycc(getregdata(), reg->country);
|
|
if (cc == NULL)
|
|
LINE_CHECK("country %d", reg->country);
|
|
else
|
|
LINE_CHECK("country %s", cc->isoname);
|
|
}
|
|
if (reg->location == 'I')
|
|
LINE_CHECK("indoor");
|
|
else if (reg->location == 'O')
|
|
LINE_CHECK("outdoor");
|
|
else if (verb)
|
|
LINE_CHECK("anywhere");
|
|
if (reg->ecm)
|
|
LINE_CHECK("ecm");
|
|
else if (verb)
|
|
LINE_CHECK("-ecm");
|
|
}
|
|
|
|
static void
|
|
list_regdomain(int s, int channelsalso)
|
|
{
|
|
getregdomain(s);
|
|
if (channelsalso) {
|
|
getchaninfo(s);
|
|
spacer = ':';
|
|
print_regdomain(®domain, 1);
|
|
LINE_BREAK();
|
|
print_channels(s, chaninfo, 1/*allchans*/, 1/*verbose*/);
|
|
} else
|
|
print_regdomain(®domain, verbose);
|
|
}
|
|
|
|
static void
|
|
list_mesh(int s)
|
|
{
|
|
int i;
|
|
struct ieee80211req ireq;
|
|
struct ieee80211req_mesh_route routes[128];
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = IEEE80211_IOC_MESH_RTCMD;
|
|
ireq.i_val = IEEE80211_MESH_RTCMD_LIST;
|
|
ireq.i_data = &routes;
|
|
ireq.i_len = sizeof(routes);
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0)
|
|
err(1, "unable to get the Mesh routing table");
|
|
|
|
printf("%-17.17s %-17.17s %4s %4s %4s\n"
|
|
, "DEST"
|
|
, "NEXT HOP"
|
|
, "HOPS"
|
|
, "METRIC"
|
|
, "LIFETIME");
|
|
|
|
for (i = 0; i < ireq.i_len / sizeof(*routes); i++) {
|
|
printf("%s ",
|
|
ether_ntoa((const struct ether_addr *)routes[i].imr_dest));
|
|
printf("%s %4u %4d %6d\n",
|
|
ether_ntoa((const struct ether_addr *)
|
|
routes[i].imr_nexthop),
|
|
routes[i].imr_nhops, routes[i].imr_metric,
|
|
routes[i].imr_lifetime);
|
|
}
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211list, arg, d)
|
|
{
|
|
#define iseq(a,b) (strncasecmp(a,b,sizeof(b)-1) == 0)
|
|
|
|
LINE_INIT('\t');
|
|
|
|
if (iseq(arg, "sta"))
|
|
list_stations(s);
|
|
else if (iseq(arg, "scan") || iseq(arg, "ap"))
|
|
list_scan(s);
|
|
else if (iseq(arg, "chan") || iseq(arg, "freq"))
|
|
list_channels(s, 1);
|
|
else if (iseq(arg, "active"))
|
|
list_channels(s, 0);
|
|
else if (iseq(arg, "keys"))
|
|
list_keys(s);
|
|
else if (iseq(arg, "caps"))
|
|
list_capabilities(s);
|
|
else if (iseq(arg, "wme") || iseq(arg, "wmm"))
|
|
list_wme(s);
|
|
else if (iseq(arg, "mac"))
|
|
list_mac(s);
|
|
else if (iseq(arg, "txpow"))
|
|
list_txpow(s);
|
|
else if (iseq(arg, "roam"))
|
|
list_roam(s);
|
|
else if (iseq(arg, "txparam") || iseq(arg, "txparm"))
|
|
list_txparams(s);
|
|
else if (iseq(arg, "regdomain"))
|
|
list_regdomain(s, 1);
|
|
else if (iseq(arg, "countries"))
|
|
list_countries();
|
|
else if (iseq(arg, "mesh"))
|
|
list_mesh(s);
|
|
else
|
|
errx(1, "Don't know how to list %s for %s", arg, name);
|
|
LINE_BREAK();
|
|
#undef iseq
|
|
}
|
|
|
|
static enum ieee80211_opmode
|
|
get80211opmode(int s)
|
|
{
|
|
struct ifmediareq ifmr;
|
|
|
|
(void) memset(&ifmr, 0, sizeof(ifmr));
|
|
(void) strncpy(ifmr.ifm_name, name, sizeof(ifmr.ifm_name));
|
|
|
|
if (ioctl(s, SIOCGIFMEDIA, (caddr_t)&ifmr) >= 0) {
|
|
if (ifmr.ifm_current & IFM_IEEE80211_ADHOC) {
|
|
if (ifmr.ifm_current & IFM_FLAG0)
|
|
return IEEE80211_M_AHDEMO;
|
|
else
|
|
return IEEE80211_M_IBSS;
|
|
}
|
|
if (ifmr.ifm_current & IFM_IEEE80211_HOSTAP)
|
|
return IEEE80211_M_HOSTAP;
|
|
if (ifmr.ifm_current & IFM_IEEE80211_MONITOR)
|
|
return IEEE80211_M_MONITOR;
|
|
if (ifmr.ifm_current & IFM_IEEE80211_MBSS)
|
|
return IEEE80211_M_MBSS;
|
|
}
|
|
return IEEE80211_M_STA;
|
|
}
|
|
|
|
#if 0
|
|
static void
|
|
printcipher(int s, struct ieee80211req *ireq, int keylenop)
|
|
{
|
|
switch (ireq->i_val) {
|
|
case IEEE80211_CIPHER_WEP:
|
|
ireq->i_type = keylenop;
|
|
if (ioctl(s, SIOCG80211, ireq) != -1)
|
|
printf("WEP-%s",
|
|
ireq->i_len <= 5 ? "40" :
|
|
ireq->i_len <= 13 ? "104" : "128");
|
|
else
|
|
printf("WEP");
|
|
break;
|
|
case IEEE80211_CIPHER_TKIP:
|
|
printf("TKIP");
|
|
break;
|
|
case IEEE80211_CIPHER_AES_OCB:
|
|
printf("AES-OCB");
|
|
break;
|
|
case IEEE80211_CIPHER_AES_CCM:
|
|
printf("AES-CCM");
|
|
break;
|
|
case IEEE80211_CIPHER_CKIP:
|
|
printf("CKIP");
|
|
break;
|
|
case IEEE80211_CIPHER_NONE:
|
|
printf("NONE");
|
|
break;
|
|
default:
|
|
printf("UNKNOWN (0x%x)", ireq->i_val);
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
printkey(const struct ieee80211req_key *ik)
|
|
{
|
|
static const uint8_t zerodata[IEEE80211_KEYBUF_SIZE];
|
|
int keylen = ik->ik_keylen;
|
|
int printcontents;
|
|
|
|
printcontents = printkeys &&
|
|
(memcmp(ik->ik_keydata, zerodata, keylen) != 0 || verbose);
|
|
if (printcontents)
|
|
LINE_BREAK();
|
|
switch (ik->ik_type) {
|
|
case IEEE80211_CIPHER_WEP:
|
|
/* compatibility */
|
|
LINE_CHECK("wepkey %u:%s", ik->ik_keyix+1,
|
|
keylen <= 5 ? "40-bit" :
|
|
keylen <= 13 ? "104-bit" : "128-bit");
|
|
break;
|
|
case IEEE80211_CIPHER_TKIP:
|
|
if (keylen > 128/8)
|
|
keylen -= 128/8; /* ignore MIC for now */
|
|
LINE_CHECK("TKIP %u:%u-bit", ik->ik_keyix+1, 8*keylen);
|
|
break;
|
|
case IEEE80211_CIPHER_AES_OCB:
|
|
LINE_CHECK("AES-OCB %u:%u-bit", ik->ik_keyix+1, 8*keylen);
|
|
break;
|
|
case IEEE80211_CIPHER_AES_CCM:
|
|
LINE_CHECK("AES-CCM %u:%u-bit", ik->ik_keyix+1, 8*keylen);
|
|
break;
|
|
case IEEE80211_CIPHER_CKIP:
|
|
LINE_CHECK("CKIP %u:%u-bit", ik->ik_keyix+1, 8*keylen);
|
|
break;
|
|
case IEEE80211_CIPHER_NONE:
|
|
LINE_CHECK("NULL %u:%u-bit", ik->ik_keyix+1, 8*keylen);
|
|
break;
|
|
default:
|
|
LINE_CHECK("UNKNOWN (0x%x) %u:%u-bit",
|
|
ik->ik_type, ik->ik_keyix+1, 8*keylen);
|
|
break;
|
|
}
|
|
if (printcontents) {
|
|
int i;
|
|
|
|
printf(" <");
|
|
for (i = 0; i < keylen; i++)
|
|
printf("%02x", ik->ik_keydata[i]);
|
|
printf(">");
|
|
if (ik->ik_type != IEEE80211_CIPHER_WEP &&
|
|
(ik->ik_keyrsc != 0 || verbose))
|
|
printf(" rsc %ju", (uintmax_t)ik->ik_keyrsc);
|
|
if (ik->ik_type != IEEE80211_CIPHER_WEP &&
|
|
(ik->ik_keytsc != 0 || verbose))
|
|
printf(" tsc %ju", (uintmax_t)ik->ik_keytsc);
|
|
if (ik->ik_flags != 0 && verbose) {
|
|
const char *sep = " ";
|
|
|
|
if (ik->ik_flags & IEEE80211_KEY_XMIT)
|
|
printf("%stx", sep), sep = "+";
|
|
if (ik->ik_flags & IEEE80211_KEY_RECV)
|
|
printf("%srx", sep), sep = "+";
|
|
if (ik->ik_flags & IEEE80211_KEY_DEFAULT)
|
|
printf("%sdef", sep), sep = "+";
|
|
}
|
|
LINE_BREAK();
|
|
}
|
|
}
|
|
|
|
static void
|
|
printrate(const char *tag, int v, int defrate, int defmcs)
|
|
{
|
|
if ((v & IEEE80211_RATE_MCS) == 0) {
|
|
if (v != defrate) {
|
|
if (v & 1)
|
|
LINE_CHECK("%s %d.5", tag, v/2);
|
|
else
|
|
LINE_CHECK("%s %d", tag, v/2);
|
|
}
|
|
} else {
|
|
if (v != defmcs)
|
|
LINE_CHECK("%s %d", tag, v &~ 0x80);
|
|
}
|
|
}
|
|
|
|
static int
|
|
getid(int s, int ix, void *data, size_t len, int *plen, int mesh)
|
|
{
|
|
struct ieee80211req ireq;
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = (!mesh) ? IEEE80211_IOC_SSID : IEEE80211_IOC_MESH_ID;
|
|
ireq.i_val = ix;
|
|
ireq.i_data = data;
|
|
ireq.i_len = len;
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0)
|
|
return -1;
|
|
*plen = ireq.i_len;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ieee80211_status(int s)
|
|
{
|
|
static const uint8_t zerobssid[IEEE80211_ADDR_LEN];
|
|
enum ieee80211_opmode opmode = get80211opmode(s);
|
|
int i, num, wpa, wme, bgscan, bgscaninterval, val, len, wepmode;
|
|
uint8_t data[32];
|
|
const struct ieee80211_channel *c;
|
|
const struct ieee80211_roamparam *rp;
|
|
const struct ieee80211_txparam *tp;
|
|
|
|
if (getid(s, -1, data, sizeof(data), &len, 0) < 0) {
|
|
/* If we can't get the SSID, this isn't an 802.11 device. */
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Invalidate cached state so printing status for multiple
|
|
* if's doesn't reuse the first interfaces' cached state.
|
|
*/
|
|
gotcurchan = 0;
|
|
gotroam = 0;
|
|
gottxparams = 0;
|
|
gothtconf = 0;
|
|
gotregdomain = 0;
|
|
|
|
printf("\t");
|
|
if (opmode == IEEE80211_M_MBSS) {
|
|
printf("meshid ");
|
|
getid(s, 0, data, sizeof(data), &len, 1);
|
|
print_string(data, len);
|
|
} else {
|
|
if (get80211val(s, IEEE80211_IOC_NUMSSIDS, &num) < 0)
|
|
num = 0;
|
|
printf("ssid ");
|
|
if (num > 1) {
|
|
for (i = 0; i < num; i++) {
|
|
if (getid(s, i, data, sizeof(data), &len, 0) >= 0 && len > 0) {
|
|
printf(" %d:", i + 1);
|
|
print_string(data, len);
|
|
}
|
|
}
|
|
} else
|
|
print_string(data, len);
|
|
}
|
|
c = getcurchan(s);
|
|
if (c->ic_freq != IEEE80211_CHAN_ANY) {
|
|
char buf[14];
|
|
printf(" channel %d (%u Mhz%s)", c->ic_ieee, c->ic_freq,
|
|
get_chaninfo(c, 1, buf, sizeof(buf)));
|
|
} else if (verbose)
|
|
printf(" channel UNDEF");
|
|
|
|
if (get80211(s, IEEE80211_IOC_BSSID, data, IEEE80211_ADDR_LEN) >= 0 &&
|
|
(memcmp(data, zerobssid, sizeof(zerobssid)) != 0 || verbose))
|
|
printf(" bssid %s", ether_ntoa((struct ether_addr *)data));
|
|
|
|
if (get80211len(s, IEEE80211_IOC_STATIONNAME, data, sizeof(data), &len) != -1) {
|
|
printf("\n\tstationname ");
|
|
print_string(data, len);
|
|
}
|
|
|
|
spacer = ' '; /* force first break */
|
|
LINE_BREAK();
|
|
|
|
list_regdomain(s, 0);
|
|
|
|
wpa = 0;
|
|
if (get80211val(s, IEEE80211_IOC_AUTHMODE, &val) != -1) {
|
|
switch (val) {
|
|
case IEEE80211_AUTH_NONE:
|
|
LINE_CHECK("authmode NONE");
|
|
break;
|
|
case IEEE80211_AUTH_OPEN:
|
|
LINE_CHECK("authmode OPEN");
|
|
break;
|
|
case IEEE80211_AUTH_SHARED:
|
|
LINE_CHECK("authmode SHARED");
|
|
break;
|
|
case IEEE80211_AUTH_8021X:
|
|
LINE_CHECK("authmode 802.1x");
|
|
break;
|
|
case IEEE80211_AUTH_WPA:
|
|
if (get80211val(s, IEEE80211_IOC_WPA, &wpa) < 0)
|
|
wpa = 1; /* default to WPA1 */
|
|
switch (wpa) {
|
|
case 2:
|
|
LINE_CHECK("authmode WPA2/802.11i");
|
|
break;
|
|
case 3:
|
|
LINE_CHECK("authmode WPA1+WPA2/802.11i");
|
|
break;
|
|
default:
|
|
LINE_CHECK("authmode WPA");
|
|
break;
|
|
}
|
|
break;
|
|
case IEEE80211_AUTH_AUTO:
|
|
LINE_CHECK("authmode AUTO");
|
|
break;
|
|
default:
|
|
LINE_CHECK("authmode UNKNOWN (0x%x)", val);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (wpa || verbose) {
|
|
if (get80211val(s, IEEE80211_IOC_WPS, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("wps");
|
|
else if (verbose)
|
|
LINE_CHECK("-wps");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_TSN, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("tsn");
|
|
else if (verbose)
|
|
LINE_CHECK("-tsn");
|
|
}
|
|
if (ioctl(s, IEEE80211_IOC_COUNTERMEASURES, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("countermeasures");
|
|
else if (verbose)
|
|
LINE_CHECK("-countermeasures");
|
|
}
|
|
#if 0
|
|
/* XXX not interesting with WPA done in user space */
|
|
ireq.i_type = IEEE80211_IOC_KEYMGTALGS;
|
|
if (ioctl(s, SIOCG80211, &ireq) != -1) {
|
|
}
|
|
|
|
ireq.i_type = IEEE80211_IOC_MCASTCIPHER;
|
|
if (ioctl(s, SIOCG80211, &ireq) != -1) {
|
|
LINE_CHECK("mcastcipher ");
|
|
printcipher(s, &ireq, IEEE80211_IOC_MCASTKEYLEN);
|
|
spacer = ' ';
|
|
}
|
|
|
|
ireq.i_type = IEEE80211_IOC_UCASTCIPHER;
|
|
if (ioctl(s, SIOCG80211, &ireq) != -1) {
|
|
LINE_CHECK("ucastcipher ");
|
|
printcipher(s, &ireq, IEEE80211_IOC_UCASTKEYLEN);
|
|
}
|
|
|
|
if (wpa & 2) {
|
|
ireq.i_type = IEEE80211_IOC_RSNCAPS;
|
|
if (ioctl(s, SIOCG80211, &ireq) != -1) {
|
|
LINE_CHECK("RSN caps 0x%x", ireq.i_val);
|
|
spacer = ' ';
|
|
}
|
|
}
|
|
|
|
ireq.i_type = IEEE80211_IOC_UCASTCIPHERS;
|
|
if (ioctl(s, SIOCG80211, &ireq) != -1) {
|
|
}
|
|
#endif
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_WEP, &wepmode) != -1 &&
|
|
wepmode != IEEE80211_WEP_NOSUP) {
|
|
int firstkey;
|
|
|
|
switch (wepmode) {
|
|
case IEEE80211_WEP_OFF:
|
|
LINE_CHECK("privacy OFF");
|
|
break;
|
|
case IEEE80211_WEP_ON:
|
|
LINE_CHECK("privacy ON");
|
|
break;
|
|
case IEEE80211_WEP_MIXED:
|
|
LINE_CHECK("privacy MIXED");
|
|
break;
|
|
default:
|
|
LINE_CHECK("privacy UNKNOWN (0x%x)", wepmode);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* If we get here then we've got WEP support so we need
|
|
* to print WEP status.
|
|
*/
|
|
|
|
if (get80211val(s, IEEE80211_IOC_WEPTXKEY, &val) < 0) {
|
|
warn("WEP support, but no tx key!");
|
|
goto end;
|
|
}
|
|
if (val != -1)
|
|
LINE_CHECK("deftxkey %d", val+1);
|
|
else if (wepmode != IEEE80211_WEP_OFF || verbose)
|
|
LINE_CHECK("deftxkey UNDEF");
|
|
|
|
if (get80211val(s, IEEE80211_IOC_NUMWEPKEYS, &num) < 0) {
|
|
warn("WEP support, but no NUMWEPKEYS support!");
|
|
goto end;
|
|
}
|
|
|
|
firstkey = 1;
|
|
for (i = 0; i < num; i++) {
|
|
struct ieee80211req_key ik;
|
|
|
|
memset(&ik, 0, sizeof(ik));
|
|
ik.ik_keyix = i;
|
|
if (get80211(s, IEEE80211_IOC_WPAKEY, &ik, sizeof(ik)) < 0) {
|
|
warn("WEP support, but can get keys!");
|
|
goto end;
|
|
}
|
|
if (ik.ik_keylen != 0) {
|
|
if (verbose)
|
|
LINE_BREAK();
|
|
printkey(&ik);
|
|
firstkey = 0;
|
|
}
|
|
}
|
|
end:
|
|
;
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_POWERSAVE, &val) != -1 &&
|
|
val != IEEE80211_POWERSAVE_NOSUP ) {
|
|
if (val != IEEE80211_POWERSAVE_OFF || verbose) {
|
|
switch (val) {
|
|
case IEEE80211_POWERSAVE_OFF:
|
|
LINE_CHECK("powersavemode OFF");
|
|
break;
|
|
case IEEE80211_POWERSAVE_CAM:
|
|
LINE_CHECK("powersavemode CAM");
|
|
break;
|
|
case IEEE80211_POWERSAVE_PSP:
|
|
LINE_CHECK("powersavemode PSP");
|
|
break;
|
|
case IEEE80211_POWERSAVE_PSP_CAM:
|
|
LINE_CHECK("powersavemode PSP-CAM");
|
|
break;
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_POWERSAVESLEEP, &val) != -1)
|
|
LINE_CHECK("powersavesleep %d", val);
|
|
}
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_TXPOWER, &val) != -1) {
|
|
if (val & 1)
|
|
LINE_CHECK("txpower %d.5", val/2);
|
|
else
|
|
LINE_CHECK("txpower %d", val/2);
|
|
}
|
|
if (verbose) {
|
|
if (get80211val(s, IEEE80211_IOC_TXPOWMAX, &val) != -1)
|
|
LINE_CHECK("txpowmax %.1f", val/2.);
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_DOTD, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("dotd");
|
|
else if (verbose)
|
|
LINE_CHECK("-dotd");
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_RTSTHRESHOLD, &val) != -1) {
|
|
if (val != IEEE80211_RTS_MAX || verbose)
|
|
LINE_CHECK("rtsthreshold %d", val);
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_FRAGTHRESHOLD, &val) != -1) {
|
|
if (val != IEEE80211_FRAG_MAX || verbose)
|
|
LINE_CHECK("fragthreshold %d", val);
|
|
}
|
|
if (opmode == IEEE80211_M_STA || verbose) {
|
|
if (get80211val(s, IEEE80211_IOC_BMISSTHRESHOLD, &val) != -1) {
|
|
if (val != IEEE80211_HWBMISS_MAX || verbose)
|
|
LINE_CHECK("bmiss %d", val);
|
|
}
|
|
}
|
|
|
|
if (!verbose) {
|
|
gettxparams(s);
|
|
tp = &txparams.params[chan2mode(c)];
|
|
printrate("ucastrate", tp->ucastrate,
|
|
IEEE80211_FIXED_RATE_NONE, IEEE80211_FIXED_RATE_NONE);
|
|
printrate("mcastrate", tp->mcastrate, 2*1,
|
|
IEEE80211_RATE_MCS|0);
|
|
printrate("mgmtrate", tp->mgmtrate, 2*1,
|
|
IEEE80211_RATE_MCS|0);
|
|
if (tp->maxretry != 6) /* XXX */
|
|
LINE_CHECK("maxretry %d", tp->maxretry);
|
|
} else {
|
|
LINE_BREAK();
|
|
list_txparams(s);
|
|
}
|
|
|
|
bgscaninterval = -1;
|
|
(void) get80211val(s, IEEE80211_IOC_BGSCAN_INTERVAL, &bgscaninterval);
|
|
|
|
if (get80211val(s, IEEE80211_IOC_SCANVALID, &val) != -1) {
|
|
if (val != bgscaninterval || verbose)
|
|
LINE_CHECK("scanvalid %u", val);
|
|
}
|
|
|
|
bgscan = 0;
|
|
if (get80211val(s, IEEE80211_IOC_BGSCAN, &bgscan) != -1) {
|
|
if (bgscan)
|
|
LINE_CHECK("bgscan");
|
|
else if (verbose)
|
|
LINE_CHECK("-bgscan");
|
|
}
|
|
if (bgscan || verbose) {
|
|
if (bgscaninterval != -1)
|
|
LINE_CHECK("bgscanintvl %u", bgscaninterval);
|
|
if (get80211val(s, IEEE80211_IOC_BGSCAN_IDLE, &val) != -1)
|
|
LINE_CHECK("bgscanidle %u", val);
|
|
if (!verbose) {
|
|
getroam(s);
|
|
rp = &roamparams.params[chan2mode(c)];
|
|
if (rp->rssi & 1)
|
|
LINE_CHECK("roam:rssi %u.5", rp->rssi/2);
|
|
else
|
|
LINE_CHECK("roam:rssi %u", rp->rssi/2);
|
|
LINE_CHECK("roam:rate %u", rp->rate/2);
|
|
} else {
|
|
LINE_BREAK();
|
|
list_roam(s);
|
|
}
|
|
}
|
|
|
|
if (IEEE80211_IS_CHAN_ANYG(c) || verbose) {
|
|
if (get80211val(s, IEEE80211_IOC_PUREG, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("pureg");
|
|
else if (verbose)
|
|
LINE_CHECK("-pureg");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_PROTMODE, &val) != -1) {
|
|
switch (val) {
|
|
case IEEE80211_PROTMODE_OFF:
|
|
LINE_CHECK("protmode OFF");
|
|
break;
|
|
case IEEE80211_PROTMODE_CTS:
|
|
LINE_CHECK("protmode CTS");
|
|
break;
|
|
case IEEE80211_PROTMODE_RTSCTS:
|
|
LINE_CHECK("protmode RTSCTS");
|
|
break;
|
|
default:
|
|
LINE_CHECK("protmode UNKNOWN (0x%x)", val);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (IEEE80211_IS_CHAN_HT(c) || verbose) {
|
|
gethtconf(s);
|
|
switch (htconf & 3) {
|
|
case 0:
|
|
case 2:
|
|
LINE_CHECK("-ht");
|
|
break;
|
|
case 1:
|
|
LINE_CHECK("ht20");
|
|
break;
|
|
case 3:
|
|
if (verbose)
|
|
LINE_CHECK("ht");
|
|
break;
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_HTCOMPAT, &val) != -1) {
|
|
if (!val)
|
|
LINE_CHECK("-htcompat");
|
|
else if (verbose)
|
|
LINE_CHECK("htcompat");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_AMPDU, &val) != -1) {
|
|
switch (val) {
|
|
case 0:
|
|
LINE_CHECK("-ampdu");
|
|
break;
|
|
case 1:
|
|
LINE_CHECK("ampdutx -ampdurx");
|
|
break;
|
|
case 2:
|
|
LINE_CHECK("-ampdutx ampdurx");
|
|
break;
|
|
case 3:
|
|
if (verbose)
|
|
LINE_CHECK("ampdu");
|
|
break;
|
|
}
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_AMPDU_LIMIT, &val) != -1) {
|
|
switch (val) {
|
|
case IEEE80211_HTCAP_MAXRXAMPDU_8K:
|
|
LINE_CHECK("ampdulimit 8k");
|
|
break;
|
|
case IEEE80211_HTCAP_MAXRXAMPDU_16K:
|
|
LINE_CHECK("ampdulimit 16k");
|
|
break;
|
|
case IEEE80211_HTCAP_MAXRXAMPDU_32K:
|
|
LINE_CHECK("ampdulimit 32k");
|
|
break;
|
|
case IEEE80211_HTCAP_MAXRXAMPDU_64K:
|
|
LINE_CHECK("ampdulimit 64k");
|
|
break;
|
|
}
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_AMPDU_DENSITY, &val) != -1) {
|
|
switch (val) {
|
|
case IEEE80211_HTCAP_MPDUDENSITY_NA:
|
|
if (verbose)
|
|
LINE_CHECK("ampdudensity NA");
|
|
break;
|
|
case IEEE80211_HTCAP_MPDUDENSITY_025:
|
|
LINE_CHECK("ampdudensity .25");
|
|
break;
|
|
case IEEE80211_HTCAP_MPDUDENSITY_05:
|
|
LINE_CHECK("ampdudensity .5");
|
|
break;
|
|
case IEEE80211_HTCAP_MPDUDENSITY_1:
|
|
LINE_CHECK("ampdudensity 1");
|
|
break;
|
|
case IEEE80211_HTCAP_MPDUDENSITY_2:
|
|
LINE_CHECK("ampdudensity 2");
|
|
break;
|
|
case IEEE80211_HTCAP_MPDUDENSITY_4:
|
|
LINE_CHECK("ampdudensity 4");
|
|
break;
|
|
case IEEE80211_HTCAP_MPDUDENSITY_8:
|
|
LINE_CHECK("ampdudensity 8");
|
|
break;
|
|
case IEEE80211_HTCAP_MPDUDENSITY_16:
|
|
LINE_CHECK("ampdudensity 16");
|
|
break;
|
|
}
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_AMSDU, &val) != -1) {
|
|
switch (val) {
|
|
case 0:
|
|
LINE_CHECK("-amsdu");
|
|
break;
|
|
case 1:
|
|
LINE_CHECK("amsdutx -amsdurx");
|
|
break;
|
|
case 2:
|
|
LINE_CHECK("-amsdutx amsdurx");
|
|
break;
|
|
case 3:
|
|
if (verbose)
|
|
LINE_CHECK("amsdu");
|
|
break;
|
|
}
|
|
}
|
|
/* XXX amsdu limit */
|
|
if (get80211val(s, IEEE80211_IOC_SHORTGI, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("shortgi");
|
|
else if (verbose)
|
|
LINE_CHECK("-shortgi");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_HTPROTMODE, &val) != -1) {
|
|
if (val == IEEE80211_PROTMODE_OFF)
|
|
LINE_CHECK("htprotmode OFF");
|
|
else if (val != IEEE80211_PROTMODE_RTSCTS)
|
|
LINE_CHECK("htprotmode UNKNOWN (0x%x)", val);
|
|
else if (verbose)
|
|
LINE_CHECK("htprotmode RTSCTS");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_PUREN, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("puren");
|
|
else if (verbose)
|
|
LINE_CHECK("-puren");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_SMPS, &val) != -1) {
|
|
if (val == IEEE80211_HTCAP_SMPS_DYNAMIC)
|
|
LINE_CHECK("smpsdyn");
|
|
else if (val == IEEE80211_HTCAP_SMPS_ENA)
|
|
LINE_CHECK("smps");
|
|
else if (verbose)
|
|
LINE_CHECK("-smps");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_RIFS, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("rifs");
|
|
else if (verbose)
|
|
LINE_CHECK("-rifs");
|
|
}
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_WME, &wme) != -1) {
|
|
if (wme)
|
|
LINE_CHECK("wme");
|
|
else if (verbose)
|
|
LINE_CHECK("-wme");
|
|
} else
|
|
wme = 0;
|
|
|
|
if (get80211val(s, IEEE80211_IOC_BURST, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("burst");
|
|
else if (verbose)
|
|
LINE_CHECK("-burst");
|
|
}
|
|
|
|
if (get80211val(s, IEEE80211_IOC_FF, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("ff");
|
|
else if (verbose)
|
|
LINE_CHECK("-ff");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_TURBOP, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("dturbo");
|
|
else if (verbose)
|
|
LINE_CHECK("-dturbo");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_DWDS, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("dwds");
|
|
else if (verbose)
|
|
LINE_CHECK("-dwds");
|
|
}
|
|
|
|
if (opmode == IEEE80211_M_HOSTAP) {
|
|
if (get80211val(s, IEEE80211_IOC_HIDESSID, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("hidessid");
|
|
else if (verbose)
|
|
LINE_CHECK("-hidessid");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_APBRIDGE, &val) != -1) {
|
|
if (!val)
|
|
LINE_CHECK("-apbridge");
|
|
else if (verbose)
|
|
LINE_CHECK("apbridge");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_DTIM_PERIOD, &val) != -1)
|
|
LINE_CHECK("dtimperiod %u", val);
|
|
|
|
if (get80211val(s, IEEE80211_IOC_DOTH, &val) != -1) {
|
|
if (!val)
|
|
LINE_CHECK("-doth");
|
|
else if (verbose)
|
|
LINE_CHECK("doth");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_DFS, &val) != -1) {
|
|
if (!val)
|
|
LINE_CHECK("-dfs");
|
|
else if (verbose)
|
|
LINE_CHECK("dfs");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_INACTIVITY, &val) != -1) {
|
|
if (!val)
|
|
LINE_CHECK("-inact");
|
|
else if (verbose)
|
|
LINE_CHECK("inact");
|
|
}
|
|
} else {
|
|
if (get80211val(s, IEEE80211_IOC_ROAMING, &val) != -1) {
|
|
if (val != IEEE80211_ROAMING_AUTO || verbose) {
|
|
switch (val) {
|
|
case IEEE80211_ROAMING_DEVICE:
|
|
LINE_CHECK("roaming DEVICE");
|
|
break;
|
|
case IEEE80211_ROAMING_AUTO:
|
|
LINE_CHECK("roaming AUTO");
|
|
break;
|
|
case IEEE80211_ROAMING_MANUAL:
|
|
LINE_CHECK("roaming MANUAL");
|
|
break;
|
|
default:
|
|
LINE_CHECK("roaming UNKNOWN (0x%x)",
|
|
val);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (opmode == IEEE80211_M_AHDEMO) {
|
|
if (get80211val(s, IEEE80211_IOC_TDMA_SLOT, &val) != -1)
|
|
LINE_CHECK("tdmaslot %u", val);
|
|
if (get80211val(s, IEEE80211_IOC_TDMA_SLOTCNT, &val) != -1)
|
|
LINE_CHECK("tdmaslotcnt %u", val);
|
|
if (get80211val(s, IEEE80211_IOC_TDMA_SLOTLEN, &val) != -1)
|
|
LINE_CHECK("tdmaslotlen %u", val);
|
|
if (get80211val(s, IEEE80211_IOC_TDMA_BINTERVAL, &val) != -1)
|
|
LINE_CHECK("tdmabintval %u", val);
|
|
} else if (get80211val(s, IEEE80211_IOC_BEACON_INTERVAL, &val) != -1) {
|
|
/* XXX default define not visible */
|
|
if (val != 100 || verbose)
|
|
LINE_CHECK("bintval %u", val);
|
|
}
|
|
|
|
if (wme && verbose) {
|
|
LINE_BREAK();
|
|
list_wme(s);
|
|
}
|
|
|
|
if (opmode == IEEE80211_M_MBSS) {
|
|
if (get80211val(s, IEEE80211_IOC_MESH_TTL, &val) != -1) {
|
|
LINE_CHECK("meshttl %u", val);
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_MESH_AP, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("meshpeering");
|
|
else
|
|
LINE_CHECK("-meshpeering");
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_MESH_FWRD, &val) != -1) {
|
|
if (val)
|
|
LINE_CHECK("meshforward");
|
|
else
|
|
LINE_CHECK("-meshforward");
|
|
}
|
|
if (get80211len(s, IEEE80211_IOC_MESH_PR_METRIC, data, 12,
|
|
&len) != -1) {
|
|
data[len] = '\0';
|
|
LINE_CHECK("meshmetric %s", data);
|
|
}
|
|
if (get80211len(s, IEEE80211_IOC_MESH_PR_PATH, data, 12,
|
|
&len) != -1) {
|
|
data[len] = '\0';
|
|
LINE_CHECK("meshpath %s", data);
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_HWMP_ROOTMODE, &val) != -1) {
|
|
switch (val) {
|
|
case IEEE80211_HWMP_ROOTMODE_DISABLED:
|
|
LINE_CHECK("hwmprootmode DISABLED");
|
|
break;
|
|
case IEEE80211_HWMP_ROOTMODE_NORMAL:
|
|
LINE_CHECK("hwmprootmode NORMAL");
|
|
break;
|
|
case IEEE80211_HWMP_ROOTMODE_PROACTIVE:
|
|
LINE_CHECK("hwmprootmode PROACTIVE");
|
|
break;
|
|
case IEEE80211_HWMP_ROOTMODE_RANN:
|
|
LINE_CHECK("hwmprootmode RANN");
|
|
break;
|
|
default:
|
|
LINE_CHECK("hwmprootmode UNKNOWN(%d)", val);
|
|
break;
|
|
}
|
|
}
|
|
if (get80211val(s, IEEE80211_IOC_HWMP_MAXHOPS, &val) != -1) {
|
|
LINE_CHECK("hwmpmaxhops %u", val);
|
|
}
|
|
}
|
|
|
|
LINE_BREAK();
|
|
}
|
|
|
|
static int
|
|
get80211(int s, int type, void *data, int len)
|
|
{
|
|
struct ieee80211req ireq;
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = type;
|
|
ireq.i_data = data;
|
|
ireq.i_len = len;
|
|
return ioctl(s, SIOCG80211, &ireq);
|
|
}
|
|
|
|
static int
|
|
get80211len(int s, int type, void *data, int len, int *plen)
|
|
{
|
|
struct ieee80211req ireq;
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = type;
|
|
ireq.i_len = len;
|
|
assert(ireq.i_len == len); /* NB: check for 16-bit truncation */
|
|
ireq.i_data = data;
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0)
|
|
return -1;
|
|
*plen = ireq.i_len;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
get80211val(int s, int type, int *val)
|
|
{
|
|
struct ieee80211req ireq;
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = type;
|
|
if (ioctl(s, SIOCG80211, &ireq) < 0)
|
|
return -1;
|
|
*val = ireq.i_val;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
set80211(int s, int type, int val, int len, void *data)
|
|
{
|
|
struct ieee80211req ireq;
|
|
|
|
(void) memset(&ireq, 0, sizeof(ireq));
|
|
(void) strncpy(ireq.i_name, name, sizeof(ireq.i_name));
|
|
ireq.i_type = type;
|
|
ireq.i_val = val;
|
|
ireq.i_len = len;
|
|
assert(ireq.i_len == len); /* NB: check for 16-bit truncation */
|
|
ireq.i_data = data;
|
|
if (ioctl(s, SIOCS80211, &ireq) < 0)
|
|
err(1, "SIOCS80211");
|
|
}
|
|
|
|
static const char *
|
|
get_string(const char *val, const char *sep, u_int8_t *buf, int *lenp)
|
|
{
|
|
int len;
|
|
int hexstr;
|
|
u_int8_t *p;
|
|
|
|
len = *lenp;
|
|
p = buf;
|
|
hexstr = (val[0] == '0' && tolower((u_char)val[1]) == 'x');
|
|
if (hexstr)
|
|
val += 2;
|
|
for (;;) {
|
|
if (*val == '\0')
|
|
break;
|
|
if (sep != NULL && strchr(sep, *val) != NULL) {
|
|
val++;
|
|
break;
|
|
}
|
|
if (hexstr) {
|
|
if (!isxdigit((u_char)val[0])) {
|
|
warnx("bad hexadecimal digits");
|
|
return NULL;
|
|
}
|
|
if (!isxdigit((u_char)val[1])) {
|
|
warnx("odd count hexadecimal digits");
|
|
return NULL;
|
|
}
|
|
}
|
|
if (p >= buf + len) {
|
|
if (hexstr)
|
|
warnx("hexadecimal digits too long");
|
|
else
|
|
warnx("string too long");
|
|
return NULL;
|
|
}
|
|
if (hexstr) {
|
|
#define tohex(x) (isdigit(x) ? (x) - '0' : tolower(x) - 'a' + 10)
|
|
*p++ = (tohex((u_char)val[0]) << 4) |
|
|
tohex((u_char)val[1]);
|
|
#undef tohex
|
|
val += 2;
|
|
} else
|
|
*p++ = *val++;
|
|
}
|
|
len = p - buf;
|
|
/* The string "-" is treated as the empty string. */
|
|
if (!hexstr && len == 1 && buf[0] == '-') {
|
|
len = 0;
|
|
memset(buf, 0, *lenp);
|
|
} else if (len < *lenp)
|
|
memset(p, 0, *lenp - len);
|
|
*lenp = len;
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
print_string(const u_int8_t *buf, int len)
|
|
{
|
|
int i;
|
|
int hasspc;
|
|
|
|
i = 0;
|
|
hasspc = 0;
|
|
for (; i < len; i++) {
|
|
if (!isprint(buf[i]) && buf[i] != '\0')
|
|
break;
|
|
if (isspace(buf[i]))
|
|
hasspc++;
|
|
}
|
|
if (i == len) {
|
|
if (hasspc || len == 0 || buf[0] == '\0')
|
|
printf("\"%.*s\"", len, buf);
|
|
else
|
|
printf("%.*s", len, buf);
|
|
} else {
|
|
printf("0x");
|
|
for (i = 0; i < len; i++)
|
|
printf("%02x", buf[i]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Virtual AP cloning support.
|
|
*/
|
|
static struct ieee80211_clone_params params = {
|
|
.icp_opmode = IEEE80211_M_STA, /* default to station mode */
|
|
};
|
|
|
|
static void
|
|
wlan_create(int s, struct ifreq *ifr)
|
|
{
|
|
static const uint8_t zerobssid[IEEE80211_ADDR_LEN];
|
|
|
|
if (params.icp_parent[0] == '\0')
|
|
errx(1, "must specify a parent device (wlandev) when creating "
|
|
"a wlan device");
|
|
if (params.icp_opmode == IEEE80211_M_WDS &&
|
|
memcmp(params.icp_bssid, zerobssid, sizeof(zerobssid)) == 0)
|
|
errx(1, "no bssid specified for WDS (use wlanbssid)");
|
|
ifr->ifr_data = (caddr_t) ¶ms;
|
|
if (ioctl(s, SIOCIFCREATE2, ifr) < 0)
|
|
err(1, "SIOCIFCREATE2");
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211clone_wlandev, arg, d)
|
|
{
|
|
strlcpy(params.icp_parent, arg, IFNAMSIZ);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211clone_wlanbssid, arg, d)
|
|
{
|
|
const struct ether_addr *ea;
|
|
|
|
ea = ether_aton(arg);
|
|
if (ea == NULL)
|
|
errx(1, "%s: cannot parse bssid", arg);
|
|
memcpy(params.icp_bssid, ea->octet, IEEE80211_ADDR_LEN);
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211clone_wlanaddr, arg, d)
|
|
{
|
|
const struct ether_addr *ea;
|
|
|
|
ea = ether_aton(arg);
|
|
if (ea == NULL)
|
|
errx(1, "%s: cannot parse addres", arg);
|
|
memcpy(params.icp_macaddr, ea->octet, IEEE80211_ADDR_LEN);
|
|
params.icp_flags |= IEEE80211_CLONE_MACADDR;
|
|
}
|
|
|
|
static
|
|
DECL_CMD_FUNC(set80211clone_wlanmode, arg, d)
|
|
{
|
|
#define iseq(a,b) (strncasecmp(a,b,sizeof(b)-1) == 0)
|
|
if (iseq(arg, "sta"))
|
|
params.icp_opmode = IEEE80211_M_STA;
|
|
else if (iseq(arg, "ahdemo") || iseq(arg, "adhoc-demo"))
|
|
params.icp_opmode = IEEE80211_M_AHDEMO;
|
|
else if (iseq(arg, "ibss") || iseq(arg, "adhoc"))
|
|
params.icp_opmode = IEEE80211_M_IBSS;
|
|
else if (iseq(arg, "ap") || iseq(arg, "host"))
|
|
params.icp_opmode = IEEE80211_M_HOSTAP;
|
|
else if (iseq(arg, "wds"))
|
|
params.icp_opmode = IEEE80211_M_WDS;
|
|
else if (iseq(arg, "monitor"))
|
|
params.icp_opmode = IEEE80211_M_MONITOR;
|
|
else if (iseq(arg, "tdma")) {
|
|
params.icp_opmode = IEEE80211_M_AHDEMO;
|
|
params.icp_flags |= IEEE80211_CLONE_TDMA;
|
|
} else if (iseq(arg, "mesh") || iseq(arg, "mp")) /* mesh point */
|
|
params.icp_opmode = IEEE80211_M_MBSS;
|
|
else
|
|
errx(1, "Don't know to create %s for %s", arg, name);
|
|
#undef iseq
|
|
}
|
|
|
|
static void
|
|
set80211clone_beacons(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
/* NB: inverted sense */
|
|
if (d)
|
|
params.icp_flags &= ~IEEE80211_CLONE_NOBEACONS;
|
|
else
|
|
params.icp_flags |= IEEE80211_CLONE_NOBEACONS;
|
|
}
|
|
|
|
static void
|
|
set80211clone_bssid(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
if (d)
|
|
params.icp_flags |= IEEE80211_CLONE_BSSID;
|
|
else
|
|
params.icp_flags &= ~IEEE80211_CLONE_BSSID;
|
|
}
|
|
|
|
static void
|
|
set80211clone_wdslegacy(const char *val, int d, int s, const struct afswtch *rafp)
|
|
{
|
|
if (d)
|
|
params.icp_flags |= IEEE80211_CLONE_WDSLEGACY;
|
|
else
|
|
params.icp_flags &= ~IEEE80211_CLONE_WDSLEGACY;
|
|
}
|
|
|
|
static struct cmd ieee80211_cmds[] = {
|
|
DEF_CMD_ARG("ssid", set80211ssid),
|
|
DEF_CMD_ARG("nwid", set80211ssid),
|
|
DEF_CMD_ARG("meshid", set80211meshid),
|
|
DEF_CMD_ARG("stationname", set80211stationname),
|
|
DEF_CMD_ARG("station", set80211stationname), /* BSD/OS */
|
|
DEF_CMD_ARG("channel", set80211channel),
|
|
DEF_CMD_ARG("authmode", set80211authmode),
|
|
DEF_CMD_ARG("powersavemode", set80211powersavemode),
|
|
DEF_CMD("powersave", 1, set80211powersave),
|
|
DEF_CMD("-powersave", 0, set80211powersave),
|
|
DEF_CMD_ARG("powersavesleep", set80211powersavesleep),
|
|
DEF_CMD_ARG("wepmode", set80211wepmode),
|
|
DEF_CMD("wep", 1, set80211wep),
|
|
DEF_CMD("-wep", 0, set80211wep),
|
|
DEF_CMD_ARG("deftxkey", set80211weptxkey),
|
|
DEF_CMD_ARG("weptxkey", set80211weptxkey),
|
|
DEF_CMD_ARG("wepkey", set80211wepkey),
|
|
DEF_CMD_ARG("nwkey", set80211nwkey), /* NetBSD */
|
|
DEF_CMD("-nwkey", 0, set80211wep), /* NetBSD */
|
|
DEF_CMD_ARG("rtsthreshold", set80211rtsthreshold),
|
|
DEF_CMD_ARG("protmode", set80211protmode),
|
|
DEF_CMD_ARG("txpower", set80211txpower),
|
|
DEF_CMD_ARG("roaming", set80211roaming),
|
|
DEF_CMD("wme", 1, set80211wme),
|
|
DEF_CMD("-wme", 0, set80211wme),
|
|
DEF_CMD("wmm", 1, set80211wme),
|
|
DEF_CMD("-wmm", 0, set80211wme),
|
|
DEF_CMD("hidessid", 1, set80211hidessid),
|
|
DEF_CMD("-hidessid", 0, set80211hidessid),
|
|
DEF_CMD("apbridge", 1, set80211apbridge),
|
|
DEF_CMD("-apbridge", 0, set80211apbridge),
|
|
DEF_CMD_ARG("chanlist", set80211chanlist),
|
|
DEF_CMD_ARG("bssid", set80211bssid),
|
|
DEF_CMD_ARG("ap", set80211bssid),
|
|
DEF_CMD("scan", 0, set80211scan),
|
|
DEF_CMD_ARG("list", set80211list),
|
|
DEF_CMD_ARG2("cwmin", set80211cwmin),
|
|
DEF_CMD_ARG2("cwmax", set80211cwmax),
|
|
DEF_CMD_ARG2("aifs", set80211aifs),
|
|
DEF_CMD_ARG2("txoplimit", set80211txoplimit),
|
|
DEF_CMD_ARG("acm", set80211acm),
|
|
DEF_CMD_ARG("-acm", set80211noacm),
|
|
DEF_CMD_ARG("ack", set80211ackpolicy),
|
|
DEF_CMD_ARG("-ack", set80211noackpolicy),
|
|
DEF_CMD_ARG2("bss:cwmin", set80211bsscwmin),
|
|
DEF_CMD_ARG2("bss:cwmax", set80211bsscwmax),
|
|
DEF_CMD_ARG2("bss:aifs", set80211bssaifs),
|
|
DEF_CMD_ARG2("bss:txoplimit", set80211bsstxoplimit),
|
|
DEF_CMD_ARG("dtimperiod", set80211dtimperiod),
|
|
DEF_CMD_ARG("bintval", set80211bintval),
|
|
DEF_CMD("mac:open", IEEE80211_MACCMD_POLICY_OPEN, set80211maccmd),
|
|
DEF_CMD("mac:allow", IEEE80211_MACCMD_POLICY_ALLOW, set80211maccmd),
|
|
DEF_CMD("mac:deny", IEEE80211_MACCMD_POLICY_DENY, set80211maccmd),
|
|
DEF_CMD("mac:radius", IEEE80211_MACCMD_POLICY_RADIUS, set80211maccmd),
|
|
DEF_CMD("mac:flush", IEEE80211_MACCMD_FLUSH, set80211maccmd),
|
|
DEF_CMD("mac:detach", IEEE80211_MACCMD_DETACH, set80211maccmd),
|
|
DEF_CMD_ARG("mac:add", set80211addmac),
|
|
DEF_CMD_ARG("mac:del", set80211delmac),
|
|
DEF_CMD_ARG("mac:kick", set80211kickmac),
|
|
DEF_CMD("pureg", 1, set80211pureg),
|
|
DEF_CMD("-pureg", 0, set80211pureg),
|
|
DEF_CMD("ff", 1, set80211fastframes),
|
|
DEF_CMD("-ff", 0, set80211fastframes),
|
|
DEF_CMD("dturbo", 1, set80211dturbo),
|
|
DEF_CMD("-dturbo", 0, set80211dturbo),
|
|
DEF_CMD("bgscan", 1, set80211bgscan),
|
|
DEF_CMD("-bgscan", 0, set80211bgscan),
|
|
DEF_CMD_ARG("bgscanidle", set80211bgscanidle),
|
|
DEF_CMD_ARG("bgscanintvl", set80211bgscanintvl),
|
|
DEF_CMD_ARG("scanvalid", set80211scanvalid),
|
|
DEF_CMD_ARG("roam:rssi", set80211roamrssi),
|
|
DEF_CMD_ARG("roam:rate", set80211roamrate),
|
|
DEF_CMD_ARG("mcastrate", set80211mcastrate),
|
|
DEF_CMD_ARG("ucastrate", set80211ucastrate),
|
|
DEF_CMD_ARG("mgtrate", set80211mgtrate),
|
|
DEF_CMD_ARG("mgmtrate", set80211mgtrate),
|
|
DEF_CMD_ARG("maxretry", set80211maxretry),
|
|
DEF_CMD_ARG("fragthreshold", set80211fragthreshold),
|
|
DEF_CMD("burst", 1, set80211burst),
|
|
DEF_CMD("-burst", 0, set80211burst),
|
|
DEF_CMD_ARG("bmiss", set80211bmissthreshold),
|
|
DEF_CMD_ARG("bmissthreshold", set80211bmissthreshold),
|
|
DEF_CMD("shortgi", 1, set80211shortgi),
|
|
DEF_CMD("-shortgi", 0, set80211shortgi),
|
|
DEF_CMD("ampdurx", 2, set80211ampdu),
|
|
DEF_CMD("-ampdurx", -2, set80211ampdu),
|
|
DEF_CMD("ampdutx", 1, set80211ampdu),
|
|
DEF_CMD("-ampdutx", -1, set80211ampdu),
|
|
DEF_CMD("ampdu", 3, set80211ampdu), /* NB: tx+rx */
|
|
DEF_CMD("-ampdu", -3, set80211ampdu),
|
|
DEF_CMD_ARG("ampdulimit", set80211ampdulimit),
|
|
DEF_CMD_ARG("ampdudensity", set80211ampdudensity),
|
|
DEF_CMD("amsdurx", 2, set80211amsdu),
|
|
DEF_CMD("-amsdurx", -2, set80211amsdu),
|
|
DEF_CMD("amsdutx", 1, set80211amsdu),
|
|
DEF_CMD("-amsdutx", -1, set80211amsdu),
|
|
DEF_CMD("amsdu", 3, set80211amsdu), /* NB: tx+rx */
|
|
DEF_CMD("-amsdu", -3, set80211amsdu),
|
|
DEF_CMD_ARG("amsdulimit", set80211amsdulimit),
|
|
DEF_CMD("puren", 1, set80211puren),
|
|
DEF_CMD("-puren", 0, set80211puren),
|
|
DEF_CMD("doth", 1, set80211doth),
|
|
DEF_CMD("-doth", 0, set80211doth),
|
|
DEF_CMD("dfs", 1, set80211dfs),
|
|
DEF_CMD("-dfs", 0, set80211dfs),
|
|
DEF_CMD("htcompat", 1, set80211htcompat),
|
|
DEF_CMD("-htcompat", 0, set80211htcompat),
|
|
DEF_CMD("dwds", 1, set80211dwds),
|
|
DEF_CMD("-dwds", 0, set80211dwds),
|
|
DEF_CMD("inact", 1, set80211inact),
|
|
DEF_CMD("-inact", 0, set80211inact),
|
|
DEF_CMD("tsn", 1, set80211tsn),
|
|
DEF_CMD("-tsn", 0, set80211tsn),
|
|
DEF_CMD_ARG("regdomain", set80211regdomain),
|
|
DEF_CMD_ARG("country", set80211country),
|
|
DEF_CMD("indoor", 'I', set80211location),
|
|
DEF_CMD("-indoor", 'O', set80211location),
|
|
DEF_CMD("outdoor", 'O', set80211location),
|
|
DEF_CMD("-outdoor", 'I', set80211location),
|
|
DEF_CMD("anywhere", ' ', set80211location),
|
|
DEF_CMD("ecm", 1, set80211ecm),
|
|
DEF_CMD("-ecm", 0, set80211ecm),
|
|
DEF_CMD("dotd", 1, set80211dotd),
|
|
DEF_CMD("-dotd", 0, set80211dotd),
|
|
DEF_CMD_ARG("htprotmode", set80211htprotmode),
|
|
DEF_CMD("ht20", 1, set80211htconf),
|
|
DEF_CMD("-ht20", 0, set80211htconf),
|
|
DEF_CMD("ht40", 3, set80211htconf), /* NB: 20+40 */
|
|
DEF_CMD("-ht40", 0, set80211htconf),
|
|
DEF_CMD("ht", 3, set80211htconf), /* NB: 20+40 */
|
|
DEF_CMD("-ht", 0, set80211htconf),
|
|
DEF_CMD("rifs", 1, set80211rifs),
|
|
DEF_CMD("-rifs", 0, set80211rifs),
|
|
DEF_CMD("smps", IEEE80211_HTCAP_SMPS_ENA, set80211smps),
|
|
DEF_CMD("smpsdyn", IEEE80211_HTCAP_SMPS_DYNAMIC, set80211smps),
|
|
DEF_CMD("-smps", IEEE80211_HTCAP_SMPS_OFF, set80211smps),
|
|
/* XXX for testing */
|
|
DEF_CMD_ARG("chanswitch", set80211chanswitch),
|
|
|
|
DEF_CMD_ARG("tdmaslot", set80211tdmaslot),
|
|
DEF_CMD_ARG("tdmaslotcnt", set80211tdmaslotcnt),
|
|
DEF_CMD_ARG("tdmaslotlen", set80211tdmaslotlen),
|
|
DEF_CMD_ARG("tdmabintval", set80211tdmabintval),
|
|
|
|
DEF_CMD_ARG("meshttl", set80211meshttl),
|
|
DEF_CMD("meshforward", 1, set80211meshforward),
|
|
DEF_CMD("-meshforward", 0, set80211meshforward),
|
|
DEF_CMD("meshpeering", 1, set80211meshpeering),
|
|
DEF_CMD("-meshpeering", 0, set80211meshpeering),
|
|
DEF_CMD_ARG("meshmetric", set80211meshmetric),
|
|
DEF_CMD_ARG("meshpath", set80211meshpath),
|
|
DEF_CMD("meshrt:flush", IEEE80211_MESH_RTCMD_FLUSH, set80211meshrtcmd),
|
|
DEF_CMD_ARG("meshrt:add", set80211addmeshrt),
|
|
DEF_CMD_ARG("meshrt:del", set80211delmeshrt),
|
|
DEF_CMD_ARG("hwmprootmode", set80211hwmprootmode),
|
|
DEF_CMD_ARG("hwmpmaxhops", set80211hwmpmaxhops),
|
|
|
|
/* vap cloning support */
|
|
DEF_CLONE_CMD_ARG("wlanaddr", set80211clone_wlanaddr),
|
|
DEF_CLONE_CMD_ARG("wlanbssid", set80211clone_wlanbssid),
|
|
DEF_CLONE_CMD_ARG("wlandev", set80211clone_wlandev),
|
|
DEF_CLONE_CMD_ARG("wlanmode", set80211clone_wlanmode),
|
|
DEF_CLONE_CMD("beacons", 1, set80211clone_beacons),
|
|
DEF_CLONE_CMD("-beacons", 0, set80211clone_beacons),
|
|
DEF_CLONE_CMD("bssid", 1, set80211clone_bssid),
|
|
DEF_CLONE_CMD("-bssid", 0, set80211clone_bssid),
|
|
DEF_CLONE_CMD("wdslegacy", 1, set80211clone_wdslegacy),
|
|
DEF_CLONE_CMD("-wdslegacy", 0, set80211clone_wdslegacy),
|
|
};
|
|
static struct afswtch af_ieee80211 = {
|
|
.af_name = "af_ieee80211",
|
|
.af_af = AF_UNSPEC,
|
|
.af_other_status = ieee80211_status,
|
|
};
|
|
|
|
static __constructor void
|
|
ieee80211_ctor(void)
|
|
{
|
|
#define N(a) (sizeof(a) / sizeof(a[0]))
|
|
int i;
|
|
|
|
for (i = 0; i < N(ieee80211_cmds); i++)
|
|
cmd_register(&ieee80211_cmds[i]);
|
|
af_register(&af_ieee80211);
|
|
clone_setdefcallback("wlan", wlan_create);
|
|
#undef N
|
|
}
|