d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
844d43d94b
freebsd-skq/sys/dev/mps/mps.c
Kenneth D. Merry 750ffe843d Silence 'out of chain frames' warnings and bump the number of frames. 
mps.c:		Hide the 'out of chain frames' warning behind MPS_INFO.

mps_sas.c:	Hide the SIM queue freeze/unfreeze messages behind MPS_INFO.

mpsvar.h:	Bump the number of chain frames from 1024 to 2048.  From
		testing, it looks like this makes it less likely that we'll
		run out of chain frames, and it doesn't cost much memory
		(32K).

MFC after:	3 days
2011-02-25 17:30:25 +00:00

1879 lines
53 KiB
C
Raw Blame History

/*-
* Copyright (c) 2009 Yahoo! Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* Communications core for LSI MPT2 */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/selinfo.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/sysctl.h>
#include <sys/endian.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <cam/scsi/scsi_all.h>
#include <dev/mps/mpi/mpi2_type.h>
#include <dev/mps/mpi/mpi2.h>
#include <dev/mps/mpi/mpi2_ioc.h>
#include <dev/mps/mpi/mpi2_cnfg.h>
#include <dev/mps/mpsvar.h>
#include <dev/mps/mps_table.h>
static void mps_startup(void *arg);
static void mps_startup_complete(struct mps_softc *sc, struct mps_command *cm);
static int mps_send_iocinit(struct mps_softc *sc);
static int mps_attach_log(struct mps_softc *sc);
static __inline void mps_complete_command(struct mps_command *cm);
static void mps_dispatch_event(struct mps_softc *sc, uintptr_t data, MPI2_EVENT_NOTIFICATION_REPLY *reply);
static void mps_config_complete(struct mps_softc *sc, struct mps_command *cm);
static void mps_periodic(void *);
SYSCTL_NODE(_hw, OID_AUTO, mps, CTLFLAG_RD, 0, "MPS Driver Parameters");
MALLOC_DEFINE(M_MPT2, "mps", "mpt2 driver memory");
/*
* Do a "Diagnostic Reset" aka a hard reset. This should get the chip out of
* any state and back to its initialization state machine.
*/
static char mpt2_reset_magic[] = { 0x00, 0x0f, 0x04, 0x0b, 0x02, 0x07, 0x0d };
static int
mps_hard_reset(struct mps_softc *sc)
{
uint32_t reg;
int i, error, tries = 0;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
/* Clear any pending interrupts */
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
/* Push the magic sequence */
error = ETIMEDOUT;
while (tries++ < 20) {
for (i = 0; i < sizeof(mpt2_reset_magic); i++)
mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET,
mpt2_reset_magic[i]);
DELAY(100 * 1000);
reg = mps_regread(sc, MPI2_HOST_DIAGNOSTIC_OFFSET);
if (reg & MPI2_DIAG_DIAG_WRITE_ENABLE) {
error = 0;
break;
}
}
if (error)
return (error);
/* Send the actual reset. XXX need to refresh the reg? */
mps_regwrite(sc, MPI2_HOST_DIAGNOSTIC_OFFSET,
reg | MPI2_DIAG_RESET_ADAPTER);
/* Wait up to 300 seconds in 50ms intervals */
error = ETIMEDOUT;
for (i = 0; i < 60000; i++) {
DELAY(50000);
reg = mps_regread(sc, MPI2_DOORBELL_OFFSET);
if ((reg & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_RESET) {
error = 0;
break;
}
}
if (error)
return (error);
mps_regwrite(sc, MPI2_WRITE_SEQUENCE_OFFSET, 0x0);
return (0);
}
static int
mps_soft_reset(struct mps_softc *sc)
{
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
mps_regwrite(sc, MPI2_DOORBELL_OFFSET,
MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET <<
MPI2_DOORBELL_FUNCTION_SHIFT);
DELAY(50000);
return (0);
}
static int
mps_transition_ready(struct mps_softc *sc)
{
uint32_t reg, state;
int error, tries = 0;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
error = 0;
while (tries++ < 5) {
reg = mps_regread(sc, MPI2_DOORBELL_OFFSET);
mps_dprint(sc, MPS_INFO, "Doorbell= 0x%x\n", reg);
/*
* Ensure the IOC is ready to talk. If it's not, try
* resetting it.
*/
if (reg & MPI2_DOORBELL_USED) {
mps_hard_reset(sc);
DELAY(50000);
continue;
}
/* Is the adapter owned by another peer? */
if ((reg & MPI2_DOORBELL_WHO_INIT_MASK) ==
(MPI2_WHOINIT_PCI_PEER << MPI2_DOORBELL_WHO_INIT_SHIFT)) {
device_printf(sc->mps_dev, "IOC is under the control "
"of another peer host, aborting initialization.\n");
return (ENXIO);
}
state = reg & MPI2_IOC_STATE_MASK;
if (state == MPI2_IOC_STATE_READY) {
/* Ready to go! */
error = 0;
break;
} else if (state == MPI2_IOC_STATE_FAULT) {
mps_dprint(sc, MPS_INFO, "IOC in fault state 0x%x\n",
state & MPI2_DOORBELL_FAULT_CODE_MASK);
mps_hard_reset(sc);
} else if (state == MPI2_IOC_STATE_OPERATIONAL) {
/* Need to take ownership */
mps_soft_reset(sc);
} else if (state == MPI2_IOC_STATE_RESET) {
/* Wait a bit, IOC might be in transition */
mps_dprint(sc, MPS_FAULT,
"IOC in unexpected reset state\n");
} else {
mps_dprint(sc, MPS_FAULT,
"IOC in unknown state 0x%x\n", state);
error = EINVAL;
break;
}
/* Wait 50ms for things to settle down. */
DELAY(50000);
}
if (error)
device_printf(sc->mps_dev, "Cannot transition IOC to ready\n");
return (error);
}
static int
mps_transition_operational(struct mps_softc *sc)
{
uint32_t reg, state;
int error;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
error = 0;
reg = mps_regread(sc, MPI2_DOORBELL_OFFSET);
mps_dprint(sc, MPS_INFO, "Doorbell= 0x%x\n", reg);
state = reg & MPI2_IOC_STATE_MASK;
if (state != MPI2_IOC_STATE_READY) {
if ((error = mps_transition_ready(sc)) != 0)
return (error);
}
error = mps_send_iocinit(sc);
return (error);
}
/* Wait for the chip to ACK a word that we've put into its FIFO */
static int
mps_wait_db_ack(struct mps_softc *sc)
{
int retry;
for (retry = 0; retry < MPS_DB_MAX_WAIT; retry++) {
if ((mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) &
MPI2_HIS_SYS2IOC_DB_STATUS) == 0)
return (0);
DELAY(2000);
}
return (ETIMEDOUT);
}
/* Wait for the chip to signal that the next word in its FIFO can be fetched */
static int
mps_wait_db_int(struct mps_softc *sc)
{
int retry;
for (retry = 0; retry < MPS_DB_MAX_WAIT; retry++) {
if ((mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET) &
MPI2_HIS_IOC2SYS_DB_STATUS) != 0)
return (0);
DELAY(2000);
}
return (ETIMEDOUT);
}
/* Step through the synchronous command state machine, i.e. "Doorbell mode" */
static int
mps_request_sync(struct mps_softc *sc, void *req, MPI2_DEFAULT_REPLY *reply,
int req_sz, int reply_sz, int timeout)
{
uint32_t *data32;
uint16_t *data16;
int i, count, ioc_sz, residual;
/* Step 1 */
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
/* Step 2 */
if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED)
return (EBUSY);
/* Step 3
* Announce that a message is coming through the doorbell. Messages
* are pushed at 32bit words, so round up if needed.
*/
count = (req_sz + 3) / 4;
mps_regwrite(sc, MPI2_DOORBELL_OFFSET,
(MPI2_FUNCTION_HANDSHAKE << MPI2_DOORBELL_FUNCTION_SHIFT) |
(count << MPI2_DOORBELL_ADD_DWORDS_SHIFT));
/* Step 4 */
if (mps_wait_db_int(sc) ||
(mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED) == 0) {
mps_dprint(sc, MPS_FAULT, "Doorbell failed to activate\n");
return (ENXIO);
}
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
if (mps_wait_db_ack(sc) != 0) {
mps_dprint(sc, MPS_FAULT, "Doorbell handshake failed\n");
return (ENXIO);
}
/* Step 5 */
/* Clock out the message data synchronously in 32-bit dwords*/
data32 = (uint32_t *)req;
for (i = 0; i < count; i++) {
mps_regwrite(sc, MPI2_DOORBELL_OFFSET, data32[i]);
if (mps_wait_db_ack(sc) != 0) {
mps_dprint(sc, MPS_FAULT,
"Timeout while writing doorbell\n");
return (ENXIO);
}
}
/* Step 6 */
/* Clock in the reply in 16-bit words. The total length of the
* message is always in the 4th byte, so clock out the first 2 words
* manually, then loop the rest.
*/
data16 = (uint16_t *)reply;
if (mps_wait_db_int(sc) != 0) {
mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 0\n");
return (ENXIO);
}
data16[0] =
mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK;
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
if (mps_wait_db_int(sc) != 0) {
mps_dprint(sc, MPS_FAULT, "Timeout reading doorbell 1\n");
return (ENXIO);
}
data16[1] =
mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_DATA_MASK;
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
/* Number of 32bit words in the message */
ioc_sz = reply->MsgLength;
/*
* Figure out how many 16bit words to clock in without overrunning.
* The precision loss with dividing reply_sz can safely be
* ignored because the messages can only be multiples of 32bits.
*/
residual = 0;
count = MIN((reply_sz / 4), ioc_sz) * 2;
if (count < ioc_sz * 2) {
residual = ioc_sz * 2 - count;
mps_dprint(sc, MPS_FAULT, "Driver error, throwing away %d "
"residual message words\n", residual);
}
for (i = 2; i < count; i++) {
if (mps_wait_db_int(sc) != 0) {
mps_dprint(sc, MPS_FAULT,
"Timeout reading doorbell %d\n", i);
return (ENXIO);
}
data16[i] = mps_regread(sc, MPI2_DOORBELL_OFFSET) &
MPI2_DOORBELL_DATA_MASK;
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
}
/*
* Pull out residual words that won't fit into the provided buffer.
* This keeps the chip from hanging due to a driver programming
* error.
*/
while (residual--) {
if (mps_wait_db_int(sc) != 0) {
mps_dprint(sc, MPS_FAULT,
"Timeout reading doorbell\n");
return (ENXIO);
}
(void)mps_regread(sc, MPI2_DOORBELL_OFFSET);
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
}
/* Step 7 */
if (mps_wait_db_int(sc) != 0) {
mps_dprint(sc, MPS_FAULT, "Timeout waiting to exit doorbell\n");
return (ENXIO);
}
if (mps_regread(sc, MPI2_DOORBELL_OFFSET) & MPI2_DOORBELL_USED)
mps_dprint(sc, MPS_FAULT, "Warning, doorbell still active\n");
mps_regwrite(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET, 0x0);
return (0);
}
void
mps_enqueue_request(struct mps_softc *sc, struct mps_command *cm)
{
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if (sc->mps_flags & MPS_FLAGS_ATTACH_DONE)
mtx_assert(&sc->mps_mtx, MA_OWNED);
if ((cm->cm_desc.Default.SMID < 1)
|| (cm->cm_desc.Default.SMID >= sc->num_reqs)) {
mps_printf(sc, "%s: invalid SMID %d, desc %#x %#x\n",
__func__, cm->cm_desc.Default.SMID,
cm->cm_desc.Words.High, cm->cm_desc.Words.Low);
}
mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_LOW_OFFSET,
cm->cm_desc.Words.Low);
mps_regwrite(sc, MPI2_REQUEST_DESCRIPTOR_POST_HIGH_OFFSET,
cm->cm_desc.Words.High);
}
int
mps_request_polled(struct mps_softc *sc, struct mps_command *cm)
{
int error, timeout = 0;
error = 0;
cm->cm_flags |= MPS_CM_FLAGS_POLLED;
cm->cm_complete = NULL;
mps_map_command(sc, cm);
while ((cm->cm_flags & MPS_CM_FLAGS_COMPLETE) == 0) {
mps_intr(sc);
DELAY(50 * 1000);
if (timeout++ > 1000) {
mps_dprint(sc, MPS_FAULT, "polling failed\n");
error = ETIMEDOUT;
break;
}
}
return (error);
}
/*
* Just the FACTS, ma'am.
*/
static int
mps_get_iocfacts(struct mps_softc *sc, MPI2_IOC_FACTS_REPLY *facts)
{
MPI2_DEFAULT_REPLY *reply;
MPI2_IOC_FACTS_REQUEST request;
int error, req_sz, reply_sz;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
req_sz = sizeof(MPI2_IOC_FACTS_REQUEST);
reply_sz = sizeof(MPI2_IOC_FACTS_REPLY);
reply = (MPI2_DEFAULT_REPLY *)facts;
bzero(&request, req_sz);
request.Function = MPI2_FUNCTION_IOC_FACTS;
error = mps_request_sync(sc, &request, reply, req_sz, reply_sz, 5);
return (error);
}
static int
mps_get_portfacts(struct mps_softc *sc, MPI2_PORT_FACTS_REPLY *facts, int port)
{
MPI2_PORT_FACTS_REQUEST *request;
MPI2_PORT_FACTS_REPLY *reply;
struct mps_command *cm;
int error;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL)
return (EBUSY);
request = (MPI2_PORT_FACTS_REQUEST *)cm->cm_req;
request->Function = MPI2_FUNCTION_PORT_FACTS;
request->PortNumber = port;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_PORT_FACTS_REPLY *)cm->cm_reply;
if ((reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS)
error = ENXIO;
bcopy(reply, facts, sizeof(MPI2_PORT_FACTS_REPLY));
mps_free_command(sc, cm);
return (error);
}
static int
mps_send_iocinit(struct mps_softc *sc)
{
MPI2_IOC_INIT_REQUEST init;
MPI2_DEFAULT_REPLY reply;
int req_sz, reply_sz, error;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
req_sz = sizeof(MPI2_IOC_INIT_REQUEST);
reply_sz = sizeof(MPI2_IOC_INIT_REPLY);
bzero(&init, req_sz);
bzero(&reply, reply_sz);
/*
* Fill in the init block. Note that most addresses are
* deliberately in the lower 32bits of memory. This is a micro-
* optimzation for PCI/PCIX, though it's not clear if it helps PCIe.
*/
init.Function = MPI2_FUNCTION_IOC_INIT;
init.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
init.MsgVersion = MPI2_VERSION;
init.HeaderVersion = MPI2_HEADER_VERSION;
init.SystemRequestFrameSize = sc->facts->IOCRequestFrameSize;
init.ReplyDescriptorPostQueueDepth = sc->pqdepth;
init.ReplyFreeQueueDepth = sc->fqdepth;
init.SenseBufferAddressHigh = 0;
init.SystemReplyAddressHigh = 0;
init.SystemRequestFrameBaseAddress.High = 0;
init.SystemRequestFrameBaseAddress.Low = (uint32_t)sc->req_busaddr;
init.ReplyDescriptorPostQueueAddress.High = 0;
init.ReplyDescriptorPostQueueAddress.Low = (uint32_t)sc->post_busaddr;
init.ReplyFreeQueueAddress.High = 0;
init.ReplyFreeQueueAddress.Low = (uint32_t)sc->free_busaddr;
init.TimeStamp.High = 0;
init.TimeStamp.Low = (uint32_t)time_uptime;
error = mps_request_sync(sc, &init, &reply, req_sz, reply_sz, 5);
if ((reply.IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS)
error = ENXIO;
mps_dprint(sc, MPS_INFO, "IOCInit status= 0x%x\n", reply.IOCStatus);
return (error);
}
static int
mps_send_portenable(struct mps_softc *sc)
{
MPI2_PORT_ENABLE_REQUEST *request;
struct mps_command *cm;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((cm = mps_alloc_command(sc)) == NULL)
return (EBUSY);
request = (MPI2_PORT_ENABLE_REQUEST *)cm->cm_req;
request->Function = MPI2_FUNCTION_PORT_ENABLE;
request->MsgFlags = 0;
request->VP_ID = 0;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_complete = mps_startup_complete;
mps_enqueue_request(sc, cm);
return (0);
}
static int
mps_send_mur(struct mps_softc *sc)
{
/* Placeholder */
return (0);
}
void
mps_memaddr_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
bus_addr_t *addr;
addr = arg;
*addr = segs[0].ds_addr;
}
static int
mps_alloc_queues(struct mps_softc *sc)
{
bus_addr_t queues_busaddr;
uint8_t *queues;
int qsize, fqsize, pqsize;
/*
* The reply free queue contains 4 byte entries in multiples of 16 and
* aligned on a 16 byte boundary. There must always be an unused entry.
* This queue supplies fresh reply frames for the firmware to use.
*
* The reply descriptor post queue contains 8 byte entries in
* multiples of 16 and aligned on a 16 byte boundary. This queue
* contains filled-in reply frames sent from the firmware to the host.
*
* These two queues are allocated together for simplicity.
*/
sc->fqdepth = roundup2((sc->num_replies + 1), 16);
sc->pqdepth = roundup2((sc->num_replies + 1), 16);
fqsize= sc->fqdepth * 4;
pqsize = sc->pqdepth * 8;
qsize = fqsize + pqsize;
if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
16, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
qsize, /* maxsize */
1, /* nsegments */
qsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->queues_dmat)) {
device_printf(sc->mps_dev, "Cannot allocate queues DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->queues_dmat, (void **)&queues, BUS_DMA_NOWAIT,
&sc->queues_map)) {
device_printf(sc->mps_dev, "Cannot allocate queues memory\n");
return (ENOMEM);
}
bzero(queues, qsize);
bus_dmamap_load(sc->queues_dmat, sc->queues_map, queues, qsize,
mps_memaddr_cb, &queues_busaddr, 0);
sc->free_queue = (uint32_t *)queues;
sc->free_busaddr = queues_busaddr;
sc->post_queue = (MPI2_REPLY_DESCRIPTORS_UNION *)(queues + fqsize);
sc->post_busaddr = queues_busaddr + fqsize;
return (0);
}
static int
mps_alloc_replies(struct mps_softc *sc)
{
int rsize, num_replies;
/*
* sc->num_replies should be one less than sc->fqdepth. We need to
* allocate space for sc->fqdepth replies, but only sc->num_replies
* replies can be used at once.
*/
num_replies = max(sc->fqdepth, sc->num_replies);
rsize = sc->facts->ReplyFrameSize * num_replies * 4;
if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
4, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
rsize, /* maxsize */
1, /* nsegments */
rsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->reply_dmat)) {
device_printf(sc->mps_dev, "Cannot allocate replies DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->reply_dmat, (void **)&sc->reply_frames,
BUS_DMA_NOWAIT, &sc->reply_map)) {
device_printf(sc->mps_dev, "Cannot allocate replies memory\n");
return (ENOMEM);
}
bzero(sc->reply_frames, rsize);
bus_dmamap_load(sc->reply_dmat, sc->reply_map, sc->reply_frames, rsize,
mps_memaddr_cb, &sc->reply_busaddr, 0);
return (0);
}
static int
mps_alloc_requests(struct mps_softc *sc)
{
struct mps_command *cm;
struct mps_chain *chain;
int i, rsize, nsegs;
rsize = sc->facts->IOCRequestFrameSize * sc->num_reqs * 4;
if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
16, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
rsize, /* maxsize */
1, /* nsegments */
rsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->req_dmat)) {
device_printf(sc->mps_dev, "Cannot allocate request DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->req_dmat, (void **)&sc->req_frames,
BUS_DMA_NOWAIT, &sc->req_map)) {
device_printf(sc->mps_dev, "Cannot allocate request memory\n");
return (ENOMEM);
}
bzero(sc->req_frames, rsize);
bus_dmamap_load(sc->req_dmat, sc->req_map, sc->req_frames, rsize,
mps_memaddr_cb, &sc->req_busaddr, 0);
rsize = sc->facts->IOCRequestFrameSize * MPS_CHAIN_FRAMES * 4;
if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
16, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
rsize, /* maxsize */
1, /* nsegments */
rsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->chain_dmat)) {
device_printf(sc->mps_dev, "Cannot allocate chain DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->chain_dmat, (void **)&sc->chain_frames,
BUS_DMA_NOWAIT, &sc->chain_map)) {
device_printf(sc->mps_dev, "Cannot allocate chain memory\n");
return (ENOMEM);
}
bzero(sc->chain_frames, rsize);
bus_dmamap_load(sc->chain_dmat, sc->chain_map, sc->chain_frames, rsize,
mps_memaddr_cb, &sc->chain_busaddr, 0);
rsize = MPS_SENSE_LEN * sc->num_reqs;
if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR_32BIT,/* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
rsize, /* maxsize */
1, /* nsegments */
rsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->sense_dmat)) {
device_printf(sc->mps_dev, "Cannot allocate sense DMA tag\n");
return (ENOMEM);
}
if (bus_dmamem_alloc(sc->sense_dmat, (void **)&sc->sense_frames,
BUS_DMA_NOWAIT, &sc->sense_map)) {
device_printf(sc->mps_dev, "Cannot allocate sense memory\n");
return (ENOMEM);
}
bzero(sc->sense_frames, rsize);
bus_dmamap_load(sc->sense_dmat, sc->sense_map, sc->sense_frames, rsize,
mps_memaddr_cb, &sc->sense_busaddr, 0);
sc->chains = malloc(sizeof(struct mps_chain) * MPS_CHAIN_FRAMES,
M_MPT2, M_WAITOK | M_ZERO);
for (i = 0; i < MPS_CHAIN_FRAMES; i++) {
chain = &sc->chains[i];
chain->chain = (MPI2_SGE_IO_UNION *)(sc->chain_frames +
i * sc->facts->IOCRequestFrameSize * 4);
chain->chain_busaddr = sc->chain_busaddr +
i * sc->facts->IOCRequestFrameSize * 4;
mps_free_chain(sc, chain);
sc->chain_free_lowwater++;
}
/* XXX Need to pick a more precise value */
nsegs = (MAXPHYS / PAGE_SIZE) + 1;
if (bus_dma_tag_create( sc->mps_parent_dmat, /* parent */
1, 0, /* algnmnt, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
BUS_SPACE_MAXSIZE_32BIT,/* maxsize */
nsegs, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT,/* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
busdma_lock_mutex, /* lockfunc */
&sc->mps_mtx, /* lockarg */
&sc->buffer_dmat)) {
device_printf(sc->mps_dev, "Cannot allocate sense DMA tag\n");
return (ENOMEM);
}
/*
* SMID 0 cannot be used as a free command per the firmware spec.
* Just drop that command instead of risking accounting bugs.
*/
sc->commands = malloc(sizeof(struct mps_command) * sc->num_reqs,
M_MPT2, M_WAITOK | M_ZERO);
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
cm->cm_req = sc->req_frames +
i * sc->facts->IOCRequestFrameSize * 4;
cm->cm_req_busaddr = sc->req_busaddr +
i * sc->facts->IOCRequestFrameSize * 4;
cm->cm_sense = &sc->sense_frames[i];
cm->cm_sense_busaddr = sc->sense_busaddr + i * MPS_SENSE_LEN;
cm->cm_desc.Default.SMID = i;
cm->cm_sc = sc;
TAILQ_INIT(&cm->cm_chain_list);
callout_init(&cm->cm_callout, 1 /*MPSAFE*/);
/* XXX Is a failure here a critical problem? */
if (bus_dmamap_create(sc->buffer_dmat, 0, &cm->cm_dmamap) == 0)
mps_free_command(sc, cm);
else {
sc->num_reqs = i;
break;
}
}
return (0);
}
static int
mps_init_queues(struct mps_softc *sc)
{
int i;
memset((uint8_t *)sc->post_queue, 0xff, sc->pqdepth * 8);
/*
* According to the spec, we need to use one less reply than we
* have space for on the queue. So sc->num_replies (the number we
* use) should be less than sc->fqdepth (allocated size).
*/
if (sc->num_replies >= sc->fqdepth)
return (EINVAL);
/*
* Initialize all of the free queue entries.
*/
for (i = 0; i < sc->fqdepth; i++)
sc->free_queue[i] = sc->reply_busaddr + (i * sc->facts->ReplyFrameSize * 4);
sc->replyfreeindex = sc->num_replies;
return (0);
}
int
mps_attach(struct mps_softc *sc)
{
int i, error;
char tmpstr[80], tmpstr2[80];
/*
* Grab any tunable-set debug level so that tracing works as early
* as possible.
*/
snprintf(tmpstr, sizeof(tmpstr), "hw.mps.%d.debug_level",
device_get_unit(sc->mps_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->mps_debug);
snprintf(tmpstr, sizeof(tmpstr), "hw.mps.%d.allow_multiple_tm_cmds",
device_get_unit(sc->mps_dev));
TUNABLE_INT_FETCH(tmpstr, &sc->allow_multiple_tm_cmds);
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
mtx_init(&sc->mps_mtx, "MPT2SAS lock", NULL, MTX_DEF);
callout_init_mtx(&sc->periodic, &sc->mps_mtx, 0);
TAILQ_INIT(&sc->event_list);
/*
* Setup the sysctl variable so the user can change the debug level
* on the fly.
*/
snprintf(tmpstr, sizeof(tmpstr), "MPS controller %d",
device_get_unit(sc->mps_dev));
snprintf(tmpstr2, sizeof(tmpstr2), "%d", device_get_unit(sc->mps_dev));
sysctl_ctx_init(&sc->sysctl_ctx);
sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctx,
SYSCTL_STATIC_CHILDREN(_hw_mps), OID_AUTO, tmpstr2, CTLFLAG_RD,
0, tmpstr);
if (sc->sysctl_tree == NULL)
return (ENOMEM);
SYSCTL_ADD_UINT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "debug_level", CTLFLAG_RW, &sc->mps_debug, 0,
"mps debug level");
SYSCTL_ADD_UINT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "allow_multiple_tm_cmds", CTLFLAG_RW,
&sc->allow_multiple_tm_cmds, 0,
"allow multiple simultaneous task management cmds");
SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "io_cmds_active", CTLFLAG_RD,
&sc->io_cmds_active, 0, "number of currently active commands");
SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "io_cmds_highwater", CTLFLAG_RD,
&sc->io_cmds_highwater, 0, "maximum active commands seen");
SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "chain_free", CTLFLAG_RD,
&sc->chain_free, 0, "number of free chain elements");
SYSCTL_ADD_INT(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "chain_free_lowwater", CTLFLAG_RD,
&sc->chain_free_lowwater, 0,"lowest number of free chain elements");
SYSCTL_ADD_UQUAD(&sc->sysctl_ctx, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "chain_alloc_fail", CTLFLAG_RD,
&sc->chain_alloc_fail, "chain allocation failures");
if ((error = mps_transition_ready(sc)) != 0)
return (error);
sc->facts = malloc(sizeof(MPI2_IOC_FACTS_REPLY), M_MPT2,
M_ZERO|M_NOWAIT);
if ((error = mps_get_iocfacts(sc, sc->facts)) != 0)
return (error);
mps_print_iocfacts(sc, sc->facts);
mps_printf(sc, "Firmware: %02d.%02d.%02d.%02d\n",
sc->facts->FWVersion.Struct.Major,
sc->facts->FWVersion.Struct.Minor,
sc->facts->FWVersion.Struct.Unit,
sc->facts->FWVersion.Struct.Dev);
mps_printf(sc, "IOCCapabilities: %b\n", sc->facts->IOCCapabilities,
"\20" "\3ScsiTaskFull" "\4DiagTrace" "\5SnapBuf" "\6ExtBuf"
"\7EEDP" "\10BiDirTarg" "\11Multicast" "\14TransRetry" "\15IR"
"\16EventReplay" "\17RaidAccel" "\20MSIXIndex" "\21HostDisc");
/*
* If the chip doesn't support event replay then a hard reset will be
* required to trigger a full discovery. Do the reset here then
* retransition to Ready. A hard reset might have already been done,
* but it doesn't hurt to do it again.
*/
if ((sc->facts->IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY) == 0) {
mps_hard_reset(sc);
if ((error = mps_transition_ready(sc)) != 0)
return (error);
}
/*
* Size the queues. Since the reply queues always need one free entry,
* we'll just deduct one reply message here.
*/
sc->num_reqs = MIN(MPS_REQ_FRAMES, sc->facts->RequestCredit);
sc->num_replies = MIN(MPS_REPLY_FRAMES + MPS_EVT_REPLY_FRAMES,
sc->facts->MaxReplyDescriptorPostQueueDepth) - 1;
mps_dprint(sc, MPS_INFO, "num_reqs %d, num_replies %d\n", sc->num_reqs,
sc->num_replies);
TAILQ_INIT(&sc->req_list);
TAILQ_INIT(&sc->chain_list);
TAILQ_INIT(&sc->tm_list);
TAILQ_INIT(&sc->io_list);
if (((error = mps_alloc_queues(sc)) != 0) ||
((error = mps_alloc_replies(sc)) != 0) ||
((error = mps_alloc_requests(sc)) != 0)) {
mps_free(sc);
return (error);
}
if (((error = mps_init_queues(sc)) != 0) ||
((error = mps_transition_operational(sc)) != 0)) {
mps_free(sc);
return (error);
}
/*
* Finish the queue initialization.
* These are set here instead of in mps_init_queues() because the
* IOC resets these values during the state transition in
* mps_transition_operational(). The free index is set to 1
* because the corresponding index in the IOC is set to 0, and the
* IOC treats the queues as full if both are set to the same value.
* Hence the reason that the queue can't hold all of the possible
* replies.
*/
sc->replypostindex = 0;
mps_regwrite(sc, MPI2_REPLY_FREE_HOST_INDEX_OFFSET, sc->replyfreeindex);
mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, 0);
sc->pfacts = malloc(sizeof(MPI2_PORT_FACTS_REPLY) *
sc->facts->NumberOfPorts, M_MPT2, M_ZERO|M_WAITOK);
for (i = 0; i < sc->facts->NumberOfPorts; i++) {
if ((error = mps_get_portfacts(sc, &sc->pfacts[i], i)) != 0) {
mps_free(sc);
return (error);
}
mps_print_portfacts(sc, &sc->pfacts[i]);
}
/* Attach the subsystems so they can prepare their event masks. */
/* XXX Should be dynamic so that IM/IR and user modules can attach */
if (((error = mps_attach_log(sc)) != 0) ||
((error = mps_attach_sas(sc)) != 0) ||
((error = mps_attach_user(sc)) != 0)) {
mps_printf(sc, "%s failed to attach all subsystems: error %d\n",
__func__, error);
mps_free(sc);
return (error);
}
if ((error = mps_pci_setup_interrupts(sc)) != 0) {
mps_free(sc);
return (error);
}
/* Start the periodic watchdog check on the IOC Doorbell */
mps_periodic(sc);
/*
* The portenable will kick off discovery events that will drive the
* rest of the initialization process. The CAM/SAS module will
* hold up the boot sequence until discovery is complete.
*/
sc->mps_ich.ich_func = mps_startup;
sc->mps_ich.ich_arg = sc;
if (config_intrhook_establish(&sc->mps_ich) != 0) {
mps_dprint(sc, MPS_FAULT, "Cannot establish MPS config hook\n");
error = EINVAL;
}
sc->mps_flags |= MPS_FLAGS_ATTACH_DONE;
return (error);
}
static void
mps_startup(void *arg)
{
struct mps_softc *sc;
sc = (struct mps_softc *)arg;
mps_lock(sc);
mps_unmask_intr(sc);
mps_send_portenable(sc);
mps_unlock(sc);
}
/* Periodic watchdog. Is called with the driver lock already held. */
static void
mps_periodic(void *arg)
{
struct mps_softc *sc;
uint32_t db;
sc = (struct mps_softc *)arg;
if (sc->mps_flags & MPS_FLAGS_SHUTDOWN)
return;
db = mps_regread(sc, MPI2_DOORBELL_OFFSET);
if ((db & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
device_printf(sc->mps_dev, "IOC Fault 0x%08x, Resetting\n", db);
/* XXX Need to broaden this to re-initialize the chip */
mps_hard_reset(sc);
db = mps_regread(sc, MPI2_DOORBELL_OFFSET);
if ((db & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
device_printf(sc->mps_dev, "Second IOC Fault 0x%08x, "
"Giving up!\n", db);
return;
}
}
callout_reset(&sc->periodic, MPS_PERIODIC_DELAY * hz, mps_periodic, sc);
}
static void
mps_startup_complete(struct mps_softc *sc, struct mps_command *cm)
{
MPI2_PORT_ENABLE_REPLY *reply;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
reply = (MPI2_PORT_ENABLE_REPLY *)cm->cm_reply;
if ((reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS)
mps_dprint(sc, MPS_FAULT, "Portenable failed\n");
mps_free_command(sc, cm);
config_intrhook_disestablish(&sc->mps_ich);
}
static void
mps_log_evt_handler(struct mps_softc *sc, uintptr_t data,
MPI2_EVENT_NOTIFICATION_REPLY *event)
{
MPI2_EVENT_DATA_LOG_ENTRY_ADDED *entry;
mps_print_event(sc, event);
switch (event->Event) {
case MPI2_EVENT_LOG_DATA:
device_printf(sc->mps_dev, "MPI2_EVENT_LOG_DATA:\n");
hexdump(event->EventData, event->EventDataLength, NULL, 0);
break;
case MPI2_EVENT_LOG_ENTRY_ADDED:
entry = (MPI2_EVENT_DATA_LOG_ENTRY_ADDED *)event->EventData;
mps_dprint(sc, MPS_INFO, "MPI2_EVENT_LOG_ENTRY_ADDED event "
"0x%x Sequence %d:\n", entry->LogEntryQualifier,
entry->LogSequence);
break;
default:
break;
}
return;
}
static int
mps_attach_log(struct mps_softc *sc)
{
uint8_t events[16];
bzero(events, 16);
setbit(events, MPI2_EVENT_LOG_DATA);
setbit(events, MPI2_EVENT_LOG_ENTRY_ADDED);
mps_register_events(sc, events, mps_log_evt_handler, NULL,
&sc->mps_log_eh);
return (0);
}
static int
mps_detach_log(struct mps_softc *sc)
{
if (sc->mps_log_eh != NULL)
mps_deregister_events(sc, sc->mps_log_eh);
return (0);
}
/*
* Free all of the driver resources and detach submodules. Should be called
* without the lock held.
*/
int
mps_free(struct mps_softc *sc)
{
struct mps_command *cm;
int i, error;
/* Turn off the watchdog */
mps_lock(sc);
sc->mps_flags |= MPS_FLAGS_SHUTDOWN;
mps_unlock(sc);
/* Lock must not be held for this */
callout_drain(&sc->periodic);
if (((error = mps_detach_log(sc)) != 0) ||
((error = mps_detach_sas(sc)) != 0))
return (error);
/* Put the IOC back in the READY state. */
mps_lock(sc);
if ((error = mps_send_mur(sc)) != 0) {
mps_unlock(sc);
return (error);
}
mps_unlock(sc);
if (sc->facts != NULL)
free(sc->facts, M_MPT2);
if (sc->pfacts != NULL)
free(sc->pfacts, M_MPT2);
if (sc->post_busaddr != 0)
bus_dmamap_unload(sc->queues_dmat, sc->queues_map);
if (sc->post_queue != NULL)
bus_dmamem_free(sc->queues_dmat, sc->post_queue,
sc->queues_map);
if (sc->queues_dmat != NULL)
bus_dma_tag_destroy(sc->queues_dmat);
if (sc->chain_busaddr != 0)
bus_dmamap_unload(sc->chain_dmat, sc->chain_map);
if (sc->chain_frames != NULL)
bus_dmamem_free(sc->chain_dmat, sc->chain_frames,sc->chain_map);
if (sc->chain_dmat != NULL)
bus_dma_tag_destroy(sc->chain_dmat);
if (sc->sense_busaddr != 0)
bus_dmamap_unload(sc->sense_dmat, sc->sense_map);
if (sc->sense_frames != NULL)
bus_dmamem_free(sc->sense_dmat, sc->sense_frames,sc->sense_map);
if (sc->sense_dmat != NULL)
bus_dma_tag_destroy(sc->sense_dmat);
if (sc->reply_busaddr != 0)
bus_dmamap_unload(sc->reply_dmat, sc->reply_map);
if (sc->reply_frames != NULL)
bus_dmamem_free(sc->reply_dmat, sc->reply_frames,sc->reply_map);
if (sc->reply_dmat != NULL)
bus_dma_tag_destroy(sc->reply_dmat);
if (sc->req_busaddr != 0)
bus_dmamap_unload(sc->req_dmat, sc->req_map);
if (sc->req_frames != NULL)
bus_dmamem_free(sc->req_dmat, sc->req_frames, sc->req_map);
if (sc->req_dmat != NULL)
bus_dma_tag_destroy(sc->req_dmat);
if (sc->chains != NULL)
free(sc->chains, M_MPT2);
if (sc->commands != NULL) {
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
bus_dmamap_destroy(sc->buffer_dmat, cm->cm_dmamap);
}
free(sc->commands, M_MPT2);
}
if (sc->buffer_dmat != NULL)
bus_dma_tag_destroy(sc->buffer_dmat);
if (sc->sysctl_tree != NULL)
sysctl_ctx_free(&sc->sysctl_ctx);
mtx_destroy(&sc->mps_mtx);
return (0);
}
static __inline void
mps_complete_command(struct mps_command *cm)
{
if (cm->cm_flags & MPS_CM_FLAGS_POLLED)
cm->cm_flags |= MPS_CM_FLAGS_COMPLETE;
if (cm->cm_complete != NULL)
cm->cm_complete(cm->cm_sc, cm);
if (cm->cm_flags & MPS_CM_FLAGS_WAKEUP) {
mps_dprint(cm->cm_sc, MPS_TRACE, "%s: waking up %p\n",
__func__, cm);
wakeup(cm);
}
}
void
mps_intr(void *data)
{
struct mps_softc *sc;
uint32_t status;
sc = (struct mps_softc *)data;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
/*
* Check interrupt status register to flush the bus. This is
* needed for both INTx interrupts and driver-driven polling
*/
status = mps_regread(sc, MPI2_HOST_INTERRUPT_STATUS_OFFSET);
if ((status & MPI2_HIS_REPLY_DESCRIPTOR_INTERRUPT) == 0)
return;
mps_lock(sc);
mps_intr_locked(data);
mps_unlock(sc);
return;
}
/*
* In theory, MSI/MSIX interrupts shouldn't need to read any registers on the
* chip. Hopefully this theory is correct.
*/
void
mps_intr_msi(void *data)
{
struct mps_softc *sc;
sc = (struct mps_softc *)data;
mps_lock(sc);
mps_intr_locked(data);
mps_unlock(sc);
return;
}
/*
* The locking is overly broad and simplistic, but easy to deal with for now.
*/
void
mps_intr_locked(void *data)
{
MPI2_REPLY_DESCRIPTORS_UNION *desc;
struct mps_softc *sc;
struct mps_command *cm = NULL;
uint8_t flags;
u_int pq;
sc = (struct mps_softc *)data;
pq = sc->replypostindex;
for ( ;; ) {
cm = NULL;
desc = &sc->post_queue[pq];
flags = desc->Default.ReplyFlags &
MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK;
if ((flags == MPI2_RPY_DESCRIPT_FLAGS_UNUSED)
|| (desc->Words.High == 0xffffffff))
break;
switch (flags) {
case MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS:
cm = &sc->commands[desc->SCSIIOSuccess.SMID];
cm->cm_reply = NULL;
break;
case MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY:
{
uint32_t baddr;
uint8_t *reply;
/*
* Re-compose the reply address from the address
* sent back from the chip. The ReplyFrameAddress
* is the lower 32 bits of the physical address of
* particular reply frame. Convert that address to
* host format, and then use that to provide the
* offset against the virtual address base
* (sc->reply_frames).
*/
baddr = le32toh(desc->AddressReply.ReplyFrameAddress);
reply = sc->reply_frames +
(baddr - ((uint32_t)sc->reply_busaddr));
/*
* Make sure the reply we got back is in a valid
* range. If not, go ahead and panic here, since
* we'll probably panic as soon as we deference the
* reply pointer anyway.
*/
if ((reply < sc->reply_frames)
|| (reply > (sc->reply_frames +
(sc->fqdepth * sc->facts->ReplyFrameSize * 4)))) {
printf("%s: WARNING: reply %p out of range!\n",
__func__, reply);
printf("%s: reply_frames %p, fqdepth %d, "
"frame size %d\n", __func__,
sc->reply_frames, sc->fqdepth,
sc->facts->ReplyFrameSize * 4);
printf("%s: baddr %#x,\n", __func__, baddr);
panic("Reply address out of range");
}
if (desc->AddressReply.SMID == 0) {
mps_dispatch_event(sc, baddr,
(MPI2_EVENT_NOTIFICATION_REPLY *) reply);
} else {
cm = &sc->commands[desc->AddressReply.SMID];
cm->cm_reply = reply;
cm->cm_reply_data =
desc->AddressReply.ReplyFrameAddress;
}
break;
}
case MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS:
case MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER:
case MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS:
default:
/* Unhandled */
device_printf(sc->mps_dev, "Unhandled reply 0x%x\n",
desc->Default.ReplyFlags);
cm = NULL;
break;
}
if (cm != NULL)
mps_complete_command(cm);
desc->Words.Low = 0xffffffff;
desc->Words.High = 0xffffffff;
if (++pq >= sc->pqdepth)
pq = 0;
}
if (pq != sc->replypostindex) {
mps_dprint(sc, MPS_INFO, "writing postindex %d\n", pq);
mps_regwrite(sc, MPI2_REPLY_POST_HOST_INDEX_OFFSET, pq);
sc->replypostindex = pq;
}
return;
}
static void
mps_dispatch_event(struct mps_softc *sc, uintptr_t data,
MPI2_EVENT_NOTIFICATION_REPLY *reply)
{
struct mps_event_handle *eh;
int event, handled = 0;
event = reply->Event;
TAILQ_FOREACH(eh, &sc->event_list, eh_list) {
if (isset(eh->mask, event)) {
eh->callback(sc, data, reply);
handled++;
}
}
if (handled == 0)
device_printf(sc->mps_dev, "Unhandled event 0x%x\n", event);
}
/*
* For both register_events and update_events, the caller supplies a bitmap
* of events that it _wants_. These functions then turn that into a bitmask
* suitable for the controller.
*/
int
mps_register_events(struct mps_softc *sc, uint8_t *mask,
mps_evt_callback_t *cb, void *data, struct mps_event_handle **handle)
{
struct mps_event_handle *eh;
int error = 0;
eh = malloc(sizeof(struct mps_event_handle), M_MPT2, M_WAITOK|M_ZERO);
eh->callback = cb;
eh->data = data;
TAILQ_INSERT_TAIL(&sc->event_list, eh, eh_list);
if (mask != NULL)
error = mps_update_events(sc, eh, mask);
*handle = eh;
return (error);
}
int
mps_update_events(struct mps_softc *sc, struct mps_event_handle *handle,
uint8_t *mask)
{
MPI2_EVENT_NOTIFICATION_REQUEST *evtreq;
MPI2_EVENT_NOTIFICATION_REPLY *reply;
struct mps_command *cm;
struct mps_event_handle *eh;
int error, i;
mps_dprint(sc, MPS_TRACE, "%s\n", __func__);
if ((mask != NULL) && (handle != NULL))
bcopy(mask, &handle->mask[0], 16);
memset(sc->event_mask, 0xff, 16);
TAILQ_FOREACH(eh, &sc->event_list, eh_list) {
for (i = 0; i < 16; i++)
sc->event_mask[i] &= ~eh->mask[i];
}
if ((cm = mps_alloc_command(sc)) == NULL)
return (EBUSY);
evtreq = (MPI2_EVENT_NOTIFICATION_REQUEST *)cm->cm_req;
evtreq->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
evtreq->MsgFlags = 0;
evtreq->SASBroadcastPrimitiveMasks = 0;
#ifdef MPS_DEBUG_ALL_EVENTS
{
u_char fullmask[16];
memset(fullmask, 0x00, 16);
bcopy(fullmask, (uint8_t *)&evtreq->EventMasks, 16);
}
#else
bcopy(sc->event_mask, (uint8_t *)&evtreq->EventMasks, 16);
#endif
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = NULL;
error = mps_request_polled(sc, cm);
reply = (MPI2_EVENT_NOTIFICATION_REPLY *)cm->cm_reply;
if ((reply->IOCStatus & MPI2_IOCSTATUS_MASK) != MPI2_IOCSTATUS_SUCCESS)
error = ENXIO;
mps_print_event(sc, reply);
mps_free_command(sc, cm);
return (error);
}
int
mps_deregister_events(struct mps_softc *sc, struct mps_event_handle *handle)
{
TAILQ_REMOVE(&sc->event_list, handle, eh_list);
free(handle, M_MPT2);
return (mps_update_events(sc, NULL, NULL));
}
/*
* Add a chain element as the next SGE for the specified command.
* Reset cm_sge and cm_sgesize to indicate all the available space.
*/
static int
mps_add_chain(struct mps_command *cm)
{
MPI2_SGE_CHAIN32 *sgc;
struct mps_chain *chain;
int space;
if (cm->cm_sglsize < MPS_SGC_SIZE)
panic("MPS: Need SGE Error Code\n");
chain = mps_alloc_chain(cm->cm_sc);
if (chain == NULL)
return (ENOBUFS);
space = (int)cm->cm_sc->facts->IOCRequestFrameSize * 4;
/*
* Note: a double-linked list is used to make it easier to
* walk for debugging.
*/
TAILQ_INSERT_TAIL(&cm->cm_chain_list, chain, chain_link);
sgc = (MPI2_SGE_CHAIN32 *)&cm->cm_sge->MpiChain;
sgc->Length = space;
sgc->NextChainOffset = 0;
sgc->Flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT;
sgc->Address = chain->chain_busaddr;
cm->cm_sge = (MPI2_SGE_IO_UNION *)&chain->chain->MpiSimple;
cm->cm_sglsize = space;
return (0);
}
/*
* Add one scatter-gather element (chain, simple, transaction context)
* to the scatter-gather list for a command. Maintain cm_sglsize and
* cm_sge as the remaining size and pointer to the next SGE to fill
* in, respectively.
*/
int
mps_push_sge(struct mps_command *cm, void *sgep, size_t len, int segsleft)
{
MPI2_SGE_TRANSACTION_UNION *tc = sgep;
MPI2_SGE_SIMPLE64 *sge = sgep;
int error, type;
type = (tc->Flags & MPI2_SGE_FLAGS_ELEMENT_MASK);
#ifdef INVARIANTS
switch (type) {
case MPI2_SGE_FLAGS_TRANSACTION_ELEMENT: {
if (len != tc->DetailsLength + 4)
panic("TC %p length %u or %zu?", tc,
tc->DetailsLength + 4, len);
}
break;
case MPI2_SGE_FLAGS_CHAIN_ELEMENT:
/* Driver only uses 32-bit chain elements */
if (len != MPS_SGC_SIZE)
panic("CHAIN %p length %u or %zu?", sgep,
MPS_SGC_SIZE, len);
break;
case MPI2_SGE_FLAGS_SIMPLE_ELEMENT:
/* Driver only uses 64-bit SGE simple elements */
sge = sgep;
if (len != MPS_SGE64_SIZE)
panic("SGE simple %p length %u or %zu?", sge,
MPS_SGE64_SIZE, len);
if (((sge->FlagsLength >> MPI2_SGE_FLAGS_SHIFT) &
MPI2_SGE_FLAGS_ADDRESS_SIZE) == 0)
panic("SGE simple %p flags %02x not marked 64-bit?",
sge, sge->FlagsLength >> MPI2_SGE_FLAGS_SHIFT);
break;
default:
panic("Unexpected SGE %p, flags %02x", tc, tc->Flags);
}
#endif
/*
* case 1: 1 more segment, enough room for it
* case 2: 2 more segments, enough room for both
* case 3: >=2 more segments, only enough room for 1 and a chain
* case 4: >=1 more segment, enough room for only a chain
* case 5: >=1 more segment, no room for anything (error)
*/
/*
* There should be room for at least a chain element, or this
* code is buggy. Case (5).
*/
if (cm->cm_sglsize < MPS_SGC_SIZE)
panic("MPS: Need SGE Error Code\n");
if (segsleft >= 2 &&
cm->cm_sglsize < len + MPS_SGC_SIZE + MPS_SGE64_SIZE) {
/*
* There are 2 or more segments left to add, and only
* enough room for 1 and a chain. Case (3).
*
* Mark as last element in this chain if necessary.
*/
if (type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) {
sge->FlagsLength |=
(MPI2_SGE_FLAGS_LAST_ELEMENT << MPI2_SGE_FLAGS_SHIFT);
}
/*
* Add the item then a chain. Do the chain now,
* rather than on the next iteration, to simplify
* understanding the code.
*/
cm->cm_sglsize -= len;
bcopy(sgep, cm->cm_sge, len);
cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len);
return (mps_add_chain(cm));
}
if (segsleft >= 1 && cm->cm_sglsize < len + MPS_SGC_SIZE) {
/*
* 1 or more segment, enough room for only a chain.
* Hope the previous element wasn't a Simple entry
* that needed to be marked with
* MPI2_SGE_FLAGS_LAST_ELEMENT. Case (4).
*/
if ((error = mps_add_chain(cm)) != 0)
return (error);
}
#ifdef INVARIANTS
/* Case 1: 1 more segment, enough room for it. */
if (segsleft == 1 && cm->cm_sglsize < len)
panic("1 seg left and no room? %u versus %zu",
cm->cm_sglsize, len);
/* Case 2: 2 more segments, enough room for both */
if (segsleft == 2 && cm->cm_sglsize < len + MPS_SGE64_SIZE)
panic("2 segs left and no room? %u versus %zu",
cm->cm_sglsize, len);
#endif
if (segsleft == 1 && type == MPI2_SGE_FLAGS_SIMPLE_ELEMENT) {
/*
* Last element of the last segment of the entire
* buffer.
*/
sge->FlagsLength |= ((MPI2_SGE_FLAGS_LAST_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST) << MPI2_SGE_FLAGS_SHIFT);
}
cm->cm_sglsize -= len;
bcopy(sgep, cm->cm_sge, len);
cm->cm_sge = (MPI2_SGE_IO_UNION *)((uintptr_t)cm->cm_sge + len);
return (0);
}
/*
* Add one dma segment to the scatter-gather list for a command.
*/
int
mps_add_dmaseg(struct mps_command *cm, vm_paddr_t pa, size_t len, u_int flags,
int segsleft)
{
MPI2_SGE_SIMPLE64 sge;
/*
* This driver always uses 64-bit address elements for
* simplicity.
*/
flags |= MPI2_SGE_FLAGS_SIMPLE_ELEMENT | MPI2_SGE_FLAGS_ADDRESS_SIZE;
sge.FlagsLength = len | (flags << MPI2_SGE_FLAGS_SHIFT);
mps_from_u64(pa, &sge.Address);
return (mps_push_sge(cm, &sge, sizeof sge, segsleft));
}
static void
mps_data_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
struct mps_softc *sc;
struct mps_command *cm;
u_int i, dir, sflags;
cm = (struct mps_command *)arg;
sc = cm->cm_sc;
/*
* In this case, just print out a warning and let the chip tell the
* user they did the wrong thing.
*/
if ((cm->cm_max_segs != 0) && (nsegs > cm->cm_max_segs)) {
mps_printf(sc, "%s: warning: busdma returned %d segments, "
"more than the %d allowed\n", __func__, nsegs,
cm->cm_max_segs);
}
/*
* Set up DMA direction flags. Note that we don't support
* bi-directional transfers, with the exception of SMP passthrough.
*/
sflags = 0;
if (cm->cm_flags & MPS_CM_FLAGS_SMP_PASS) {
/*
* We have to add a special case for SMP passthrough, there
* is no easy way to generically handle it. The first
* S/G element is used for the command (therefore the
* direction bit needs to be set). The second one is used
* for the reply. We'll leave it to the caller to make
* sure we only have two buffers.
*/
/*
* Even though the busdma man page says it doesn't make
* sense to have both direction flags, it does in this case.
* We have one s/g element being accessed in each direction.
*/
dir = BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD;
/*
* Set the direction flag on the first buffer in the SMP
* passthrough request. We'll clear it for the second one.
*/
sflags |= MPI2_SGE_FLAGS_DIRECTION |
MPI2_SGE_FLAGS_END_OF_BUFFER;
} else if (cm->cm_flags & MPS_CM_FLAGS_DATAOUT) {
sflags |= MPI2_SGE_FLAGS_DIRECTION;
dir = BUS_DMASYNC_PREWRITE;
} else
dir = BUS_DMASYNC_PREREAD;
for (i = 0; i < nsegs; i++) {
if ((cm->cm_flags & MPS_CM_FLAGS_SMP_PASS)
&& (i != 0)) {
sflags &= ~MPI2_SGE_FLAGS_DIRECTION;
}
error = mps_add_dmaseg(cm, segs[i].ds_addr, segs[i].ds_len,
sflags, nsegs - i);
if (error != 0) {
/* Resource shortage, roll back! */
mps_dprint(sc, MPS_INFO, "out of chain frames\n");
cm->cm_flags |= MPS_CM_FLAGS_CHAIN_FAILED;
mps_complete_command(cm);
return;
}
}
bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap, dir);
mps_enqueue_request(sc, cm);
return;
}
static void
mps_data_cb2(void *arg, bus_dma_segment_t *segs, int nsegs, bus_size_t mapsize,
int error)
{
mps_data_cb(arg, segs, nsegs, error);
}
/*
* Note that the only error path here is from bus_dmamap_load(), which can
* return EINPROGRESS if it is waiting for resources.
*/
int
mps_map_command(struct mps_softc *sc, struct mps_command *cm)
{
MPI2_SGE_SIMPLE32 *sge;
int error = 0;
if (cm->cm_flags & MPS_CM_FLAGS_USE_UIO) {
error = bus_dmamap_load_uio(sc->buffer_dmat, cm->cm_dmamap,
&cm->cm_uio, mps_data_cb2, cm, 0);
} else if ((cm->cm_data != NULL) && (cm->cm_length != 0)) {
error = bus_dmamap_load(sc->buffer_dmat, cm->cm_dmamap,
cm->cm_data, cm->cm_length, mps_data_cb, cm, 0);
} else {
/* Add a zero-length element as needed */
if (cm->cm_sge != NULL) {
sge = (MPI2_SGE_SIMPLE32 *)cm->cm_sge;
sge->FlagsLength = (MPI2_SGE_FLAGS_LAST_ELEMENT |
MPI2_SGE_FLAGS_END_OF_BUFFER |
MPI2_SGE_FLAGS_END_OF_LIST |
MPI2_SGE_FLAGS_SIMPLE_ELEMENT) <<
MPI2_SGE_FLAGS_SHIFT;
sge->Address = 0;
}
mps_enqueue_request(sc, cm);
}
return (error);
}
/*
* The MPT driver had a verbose interface for config pages. In this driver,
* reduce it to much simplier terms, similar to the Linux driver.
*/
int
mps_read_config_page(struct mps_softc *sc, struct mps_config_params *params)
{
MPI2_CONFIG_REQUEST *req;
struct mps_command *cm;
int error;
if (sc->mps_flags & MPS_FLAGS_BUSY) {
return (EBUSY);
}
cm = mps_alloc_command(sc);
if (cm == NULL) {
return (EBUSY);
}
req = (MPI2_CONFIG_REQUEST *)cm->cm_req;
req->Function = MPI2_FUNCTION_CONFIG;
req->Action = params->action;
req->SGLFlags = 0;
req->ChainOffset = 0;
req->PageAddress = params->page_address;
if (params->hdr.Ext.ExtPageType != 0) {
MPI2_CONFIG_EXTENDED_PAGE_HEADER *hdr;
hdr = &params->hdr.Ext;
req->ExtPageType = hdr->ExtPageType;
req->ExtPageLength = hdr->ExtPageLength;
req->Header.PageType = MPI2_CONFIG_PAGETYPE_EXTENDED;
req->Header.PageLength = 0; /* Must be set to zero */
req->Header.PageNumber = hdr->PageNumber;
req->Header.PageVersion = hdr->PageVersion;
} else {
MPI2_CONFIG_PAGE_HEADER *hdr;
hdr = &params->hdr.Struct;
req->Header.PageType = hdr->PageType;
req->Header.PageNumber = hdr->PageNumber;
req->Header.PageLength = hdr->PageLength;
req->Header.PageVersion = hdr->PageVersion;
}
cm->cm_data = params->buffer;
cm->cm_length = params->length;
cm->cm_sge = &req->PageBufferSGE;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPS_CM_FLAGS_SGE_SIMPLE | MPS_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_complete_data = params;
if (params->callback != NULL) {
cm->cm_complete = mps_config_complete;
return (mps_map_command(sc, cm));
} else {
cm->cm_complete = NULL;
cm->cm_flags |= MPS_CM_FLAGS_WAKEUP;
if ((error = mps_map_command(sc, cm)) != 0)
return (error);
msleep(cm, &sc->mps_mtx, 0, "mpswait", 0);
mps_config_complete(sc, cm);
}
return (0);
}
int
mps_write_config_page(struct mps_softc *sc, struct mps_config_params *params)
{
return (EINVAL);
}
static void
mps_config_complete(struct mps_softc *sc, struct mps_command *cm)
{
MPI2_CONFIG_REPLY *reply;
struct mps_config_params *params;
params = cm->cm_complete_data;
if (cm->cm_data != NULL) {
bus_dmamap_sync(sc->buffer_dmat, cm->cm_dmamap,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->buffer_dmat, cm->cm_dmamap);
}
/*
* XXX KDM need to do more error recovery? This results in the
* device in question not getting probed.
*/
if ((cm->cm_flags & MPS_CM_FLAGS_ERROR_MASK) != 0) {
params->status = MPI2_IOCSTATUS_BUSY;
goto bailout;
}
reply = (MPI2_CONFIG_REPLY *)cm->cm_reply;
params->status = reply->IOCStatus;
if (params->hdr.Ext.ExtPageType != 0) {
params->hdr.Ext.ExtPageType = reply->ExtPageType;
params->hdr.Ext.ExtPageLength = reply->ExtPageLength;
} else {
params->hdr.Struct.PageType = reply->Header.PageType;
params->hdr.Struct.PageNumber = reply->Header.PageNumber;
params->hdr.Struct.PageLength = reply->Header.PageLength;
params->hdr.Struct.PageVersion = reply->Header.PageVersion;
}
bailout:
mps_free_command(sc, cm);
if (params->callback != NULL)
params->callback(sc, params);
return;
}
Reference in New Issue View Git Blame Copy Permalink