d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8463d7a051
freebsd-skq/sys/dev/usb/if_axereg.h
Sam Leffler b0db4c9328 Add private tx/rx buffer management to support large frame sizes 
and update the rx code to handle multiple frames in a single usb
transfer.  AX772 parts (at least) exhibit many input errors when
operated with a 2K rx buffer and no errors w/ a 4K rx buffer (it's
unclear what the cause of the errors is for 2K so this may just be
covering up the real issue).  Larger rx buffer sizes show no
significant performance improvement for AX772.  Bypassing the common
buffer management routines also eliminates an extra context switch
on every packet which noticeably improves performance (TCP netperf
rx goes from 45 Mb/s to 85 MB/s).

Submitted by:	"J.R. Oldroyd" <fbsd@opal.com>
Reviewed by:	imp
Obtained from:	openbsd (partly)
MFC after:	3 weeks
2007-11-10 16:23:38 +00:00

255 lines
8.3 KiB
C
Raw Blame History

/*-
* Copyright (c) 1997, 1998, 1999, 2000-2003
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Definitions for the ASIX Electronics AX88172 to ethernet controller.
*/
/*
* Vendor specific commands
* ASIX conveniently doesn't document the 'set NODEID' command in their
* datasheet (thanks a lot guys).
* To make handling these commands easier, I added some extra data
* which is decided by the axe_cmd() routine. Commands are encoded
* in 16 bites, with the format: LDCC. L and D are both nibbles in
* the high byte. L represents the data length (0 to 15) and D
* represents the direction (0 for vendor read, 1 for vendor write).
* CC is the command byte, as specified in the manual.
*/
#define AXE_CMD_DIR(x) (((x) & 0x0F00) >> 8)
#define AXE_CMD_LEN(x) (((x) & 0xF000) >> 12)
#define AXE_CMD_CMD(x) ((x) & 0x00FF)
#define AXE_172_CMD_READ_RXTX_SRAM 0x2002
#define AXE_182_CMD_READ_RXTX_SRAM 0x8002
#define AXE_172_CMD_WRITE_RX_SRAM 0x0103
#define AXE_172_CMD_WRITE_TX_SRAM 0x0104
#define AXE_182_CMD_WRITE_RXTX_SRAM 0x8103
#define AXE_CMD_MII_OPMODE_SW 0x0106
#define AXE_CMD_MII_READ_REG 0x2007
#define AXE_CMD_MII_WRITE_REG 0x2108
#define AXE_CMD_MII_READ_OPMODE 0x1009
#define AXE_CMD_MII_OPMODE_HW 0x010A
#define AXE_CMD_SROM_READ 0x200B
#define AXE_CMD_SROM_WRITE 0x010C
#define AXE_CMD_SROM_WR_ENABLE 0x010D
#define AXE_CMD_SROM_WR_DISABLE 0x010E
#define AXE_CMD_RXCTL_READ 0x200F
#define AXE_CMD_RXCTL_WRITE 0x0110
#define AXE_CMD_READ_IPG012 0x3011
#define AXE_172_CMD_WRITE_IPG0 0x0112
#define AXE_172_CMD_WRITE_IPG1 0x0113
#define AXE_172_CMD_WRITE_IPG2 0x0114
#define AXE_178_CMD_WRITE_IPG012 0x0112
#define AXE_CMD_READ_MCAST 0x8015
#define AXE_CMD_WRITE_MCAST 0x8116
#define AXE_172_CMD_READ_NODEID 0x6017
#define AXE_172_CMD_WRITE_NODEID 0x6118
#define AXE_178_CMD_READ_NODEID 0x6013
#define AXE_178_CMD_WRITE_NODEID 0x6114
#define AXE_CMD_READ_PHYID 0x2019
#define AXE_172_CMD_READ_MEDIA 0x101A
#define AXE_178_CMD_READ_MEDIA 0x201A
#define AXE_CMD_WRITE_MEDIA 0x011B
#define AXE_CMD_READ_MONITOR_MODE 0x101C
#define AXE_CMD_WRITE_MONITOR_MODE 0x011D
#define AXE_CMD_READ_GPIO 0x101E
#define AXE_CMD_WRITE_GPIO 0x011F
#define AXE_CMD_SW_RESET_REG 0x0120
#define AXE_CMD_SW_PHY_STATUS 0x0021
#define AXE_CMD_SW_PHY_SELECT 0x0122
#define AXE_SW_RESET_CLEAR 0x00
#define AXE_SW_RESET_RR 0x01
#define AXE_SW_RESET_RT 0x02
#define AXE_SW_RESET_PRTE 0x04
#define AXE_SW_RESET_PRL 0x08
#define AXE_SW_RESET_BZ 0x10
#define AXE_SW_RESET_IPRL 0x20
#define AXE_SW_RESET_IPPD 0x40
/* AX88178 documentation says to always write this bit... */
#define AXE_178_RESET_MAGIC 0x40
#define AXE_178_MEDIA_GMII 0x0001
#define AXE_MEDIA_FULL_DUPLEX 0x0002
#define AXE_172_MEDIA_TX_ABORT_ALLOW 0x0004
/* AX88178/88772 documentation says to always write 1 to bit 2 */
#define AXE_178_MEDIA_MAGIC 0x0004
/* AX88772 documentation says to always write 0 to bit 3 */
#define AXE_178_MEDIA_ENCK 0x0008
#define AXE_172_MEDIA_FLOW_CONTROL_EN 0x0010
#define AXE_178_MEDIA_RXFLOW_CONTROL_EN 0x0010
#define AXE_178_MEDIA_TXFLOW_CONTROL_EN 0x0020
#define AXE_178_MEDIA_JUMBO_EN 0x0040
#define AXE_178_MEDIA_LTPF_ONLY 0x0080
#define AXE_178_MEDIA_RX_EN 0x0100
#define AXE_178_MEDIA_100TX 0x0200
#define AXE_178_MEDIA_SBP 0x0800
#define AXE_178_MEDIA_SUPERMAC 0x1000
#define AXE_RXCMD_PROMISC 0x0001
#define AXE_RXCMD_ALLMULTI 0x0002
#define AXE_172_RXCMD_UNICAST 0x0004
#define AXE_178_RXCMD_KEEP_INVALID_CRC 0x0004
#define AXE_RXCMD_BROADCAST 0x0008
#define AXE_RXCMD_MULTICAST 0x0010
#define AXE_178_RXCMD_AP 0x0020
#define AXE_RXCMD_ENABLE 0x0080
#define AXE_178_RXCMD_MFB_2048 0x0000 /* 2K max frame burst */
#define AXE_178_RXCMD_MFB_4096 0x0100 /* 4K max frame burst */
#define AXE_178_RXCMD_MFB_8192 0x0200 /* 8K max frame burst */
#define AXE_178_RXCMD_MFB_16384 0x0300 /* 16K max frame burst*/
#define AXE_NOPHY 0xE0
#define AXE_INTPHY 0x10
#define AXE_TIMEOUT 1000
#define AXE_172_BUFSZ 1536
#define AXE_178_MIN_BUFSZ 2048
#define AXE_MIN_FRAMELEN 60
#define AXE_RX_FRAMES 1
#define AXE_TX_FRAMES 1
#if AXE_178_MAX_FRAME_BURST == 0
#define AXE_178_RXCMD_MFB AXE_178_RXCMD_MFB_2048
#define AXE_178_MAX_BUFSZ 2048
#elif AXE_178_MAX_FRAME_BURST == 1
#define AXE_178_RXCMD_MFB AXE_178_RXCMD_MFB_4096
#define AXE_178_MAX_BUFSZ 4096
#elif AXE_178_MAX_FRAME_BURST == 2
#define AXE_178_RXCMD_MFB AXE_178_RXCMD_MFB_8192
#define AXE_178_MAX_BUFSZ 8192
#else
#define AXE_178_RXCMD_MFB AXE_178_RXCMD_MFB_16384
#define AXE_178_MAX_BUFSZ 16384
#endif
#define AXE_RX_LIST_CNT 1
#define AXE_TX_LIST_CNT 1
struct axe_chain {
struct axe_softc *axe_sc;
usbd_xfer_handle axe_xfer;
char *axe_buf;
struct mbuf *axe_mbuf;
int axe_accum;
int axe_idx;
};
struct axe_cdata {
struct axe_chain axe_tx_chain[AXE_TX_LIST_CNT];
struct axe_chain axe_rx_chain[AXE_RX_LIST_CNT];
int axe_tx_prod;
int axe_tx_cons;
int axe_tx_cnt;
int axe_rx_prod;
};
#define AXE_CTL_READ 0x01
#define AXE_CTL_WRITE 0x02
#define AXE_CONFIG_NO 1
#define AXE_IFACE_IDX 0
/*
* The interrupt endpoint is currently unused
* by the ASIX part.
*/
#define AXE_ENDPT_RX 0x0
#define AXE_ENDPT_TX 0x1
#define AXE_ENDPT_INTR 0x2
#define AXE_ENDPT_MAX 0x3
struct axe_sframe_hdr {
uint16_t len;
uint16_t ilen;
} __packed;
struct axe_type {
struct usb_devno axe_dev;
uint32_t axe_flags;
#define AX172 0x0000 /* AX88172 */
#define AX178 0x0001 /* AX88178 */
#define AX772 0x0002 /* AX88772 */
};
#define AXE_INC(x, y) (x) = (x + 1) % y
struct axe_softc {
#if defined(__FreeBSD__)
#define GET_MII(sc) (device_get_softc((sc)->axe_miibus))
#elif defined(__NetBSD__)
#define GET_MII(sc) (&(sc)->axe_mii)
#elif defined(__OpenBSD__)
#define GET_MII(sc) (&(sc)->axe_mii)
#endif
struct ifnet *axe_ifp;
device_t axe_miibus;
device_t axe_dev;
usbd_device_handle axe_udev;
usbd_interface_handle axe_iface;
u_int16_t axe_vendor;
u_int16_t axe_product;
u_int16_t axe_flags;
int axe_ed[AXE_ENDPT_MAX];
usbd_pipe_handle axe_ep[AXE_ENDPT_MAX];
int axe_if_flags;
struct axe_cdata axe_cdata;
struct callout_handle axe_stat_ch;
struct mtx axe_mtx;
struct sx axe_sleeplock;
char axe_dying;
int axe_link;
unsigned char axe_ipgs[3];
unsigned char axe_phyaddrs[2];
struct timeval axe_rx_notice;
struct usb_task axe_tick_task;
int axe_bufsz;
int axe_boundary;
};
#if 0
#define AXE_LOCK(_sc) mtx_lock(&(_sc)->axe_mtx)
#define AXE_UNLOCK(_sc) mtx_unlock(&(_sc)->axe_mtx)
#else
#define AXE_LOCK(_sc)
#define AXE_UNLOCK(_sc)
#endif
#define AXE_SLEEPLOCK(_sc) sx_xlock(&(_sc)->axe_sleeplock)
#define AXE_SLEEPUNLOCK(_sc) sx_xunlock(&(_sc)->axe_sleeplock)
#define AXE_SLEEPLOCKASSERT(_sc) sx_assert(&(_sc)->axe_sleeplock, SX_XLOCKED)
Reference in New Issue View Git Blame Copy Permalink