adrian 850570a5ae Add a new HAL parameter which forces a full reset rather than warm reset. ... This forces a full reset of the baseband/radio and seems needed to clear some issues (with Merlin at least) when the baseband gets confused in a very noisy environment. Sponsored by: Hobnob, Inc.		2011-11-09 05:30:24 +00:00
..
ar2133.c	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
ar5416_ani.c	Fix ANI handling to work correctly when (trying) to receive radar errors.	2011-07-30 13:30:24 +00:00
ar5416_attach.c	Try to make it more obvious when users are using the PCI or PCIe versions of	2011-11-09 04:35:33 +00:00
ar5416_beacon.c	The AR5212 setup path (also used by the AR5416 code) configures a	2011-09-28 03:03:23 +00:00
ar5416_cal_adcdc.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_adcgain.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_cal_iq.c	Fix the calibration logic to correctly clamp the calculated coefficient.	2010-08-14 15:28:15 +00:00
ar5416_cal.c	Reduce the NF wait timeout. When doing heavy 11n RX loads, this can actually	2011-10-25 23:01:53 +00:00
ar5416_cal.h	Introduce methods for the initial calibration and the new PA calibration	2011-03-11 11:35:36 +00:00
ar5416_eeprom.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_gpio.c	Add support for the AR9285 chipset, which is found on many netbooks	2010-01-29 10:10:14 +00:00
ar5416_interrupts.c	Fix the KTR option to compile by default - it was referencing	2011-11-08 22:50:28 +00:00
ar5416_keycache.c	Replace Id keyword with the FreeBSD keyword.	2010-01-29 10:07:17 +00:00
ar5416_misc.c	Port over a new routine which grabs the percentage of time spent in TX frame, RX frame,	2011-11-09 05:25:30 +00:00
ar5416_phy.c	Modify the AR5416 11na rate table to use 24mb OFDM 11a for control traffic,	2011-02-21 05:10:34 +00:00
ar5416_power.c	Fixes from Atheros:	2011-05-12 03:15:21 +00:00
ar5416_recv.c	Remove an unused variable.	2011-10-02 14:10:25 +00:00
ar5416_reset.c	Add a new HAL parameter which forces a full reset rather than warm reset.	2011-11-09 05:30:24 +00:00
ar5416_xmit.c	Add some fixes to the 11n aggregation HAL calls:	2011-10-25 23:24:05 +00:00
ar5416.h	Port over a new routine which grabs the percentage of time spent in TX frame, RX frame,	2011-11-09 05:25:30 +00:00
ar5416.ini	Fix the addac serial load register write for AR5416.	2011-09-06 10:49:05 +00:00
ar5416desc.h	Add some 11n bits from the if_ath_tx 11n branch:	2011-10-25 23:09:07 +00:00
ar5416phy.h	Add an AR5416 aware version of the "current RSSI" function.	2011-10-04 00:32:10 +00:00
ar5416reg.h	Add some 11n bits from the if_ath_tx 11n branch:	2011-10-25 23:09:07 +00:00