freebsd-skq/usr.sbin/acpi/acpiconf/acpiconf.c
njl 79d6390885 Update the suspend/resume user API while maintaining backwards compat.
Improvements:
* /etc/rc.suspend,rc.resume are always run, no matter the source of the
  suspend request (user or kernel, apm or acpi)
* suspend now requires positive user acknowledgement.  If a user program
  wants to cancel the suspend, they can.  If one of the user programs
  hangs or doesn't respond within 10 seconds, the system suspends anyway.
* /dev/apm is clonable, allowing multiple listeners for suspend events.
  In the future, xorg-server can use this to be informed about suspend
  even if there are other listeners (i.e. apmd).

Changes:
* Two new ACPI ioctls:  REQSLPSTATE and ACKSLPSTATE.  Request begins the
  process of suspending by notifying all listeners.  acpi is monitored by
  devd(8) and /dev/apm listener(s) are also counted.  Users register their
  approval or disapproval via Ack.  If anyone disapproves, suspend is vetoed.
* Old user programs or kernel modules that used SETSLPSTATE continue to
  work.  A message is printed once that this interface is deprecated.
* acpiconf gains the -k flag to ack the suspend request.  This flag is
  undocumented on purpose since it's only used by /etc/rc.suspend.  It is
  not intended to be a permanent change and will be removed once a better
  power API is implemented.
* S5 (power off) is no longer supported via acpiconf -s 5 or apm -z/-Z.
  This restores previous behavior of halt/shutdown -p being the interface.
* Miscellaneous improvements to error reporting

Approved by:	re
2007-06-21 22:50:37 +00:00

228 lines
6.3 KiB
C

/*-
* Copyright (c) 1999 Mitsuru IWASAKI <iwasaki@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: acpiconf.c,v 1.5 2000/08/08 14:12:19 iwasaki Exp $
* $FreeBSD$
*/
#include <sys/param.h>
#include <err.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/ioctl.h>
#include <sysexits.h>
#include <unistd.h>
#include <dev/acpica/acpiio.h>
#include <contrib/dev/acpica/acpi.h>
#define ACPIDEV "/dev/acpi"
static int acpifd;
static void
acpi_init(void)
{
acpifd = open(ACPIDEV, O_RDWR);
if (acpifd == -1)
acpifd = open(ACPIDEV, O_RDONLY);
if (acpifd == -1)
err(EX_OSFILE, ACPIDEV);
}
/* Prepare to sleep and then wait for the signal that sleeping can occur. */
static void
acpi_sleep(int sleep_type)
{
int ret;
/* Notify OS that we want to sleep. devd(8) gets this notify. */
ret = ioctl(acpifd, ACPIIO_REQSLPSTATE, &sleep_type);
if (ret != 0)
err(EX_IOERR, "request sleep type (%d) failed", sleep_type);
}
/* Ack or abort a pending suspend request. */
static void
acpi_sleep_ack(int err_val)
{
int ret;
ret = ioctl(acpifd, ACPIIO_ACKSLPSTATE, &err_val);
if (ret != 0)
err(EX_IOERR, "ack sleep type failed");
}
/* should be a acpi define, but doesn't appear to be */
#define UNKNOWN_CAP 0xffffffff
#define UNKNOWN_VOLTAGE 0xffffffff
static int
acpi_battinfo(int num)
{
union acpi_battery_ioctl_arg battio;
const char *pwr_units;
int hours, min;
if (num < 0 || num > 64)
err(EX_USAGE, "invalid battery %d", num);
/* Print battery design information. */
battio.unit = num;
if (ioctl(acpifd, ACPIIO_BATT_GET_BIF, &battio) == -1)
err(EX_IOERR, "get battery info (%d) failed", num);
if (battio.bif.units == 0)
pwr_units = "mW";
else
pwr_units = "mA";
if (battio.bif.dcap == UNKNOWN_CAP)
printf("Design capacity:\tunknown\n");
else
printf("Design capacity:\t%d %sh\n", battio.bif.dcap,
pwr_units);
if (battio.bif.lfcap == UNKNOWN_CAP)
printf("Last full capacity:\tunknown\n");
else
printf("Last full capacity:\t%d %sh\n", battio.bif.lfcap,
pwr_units);
printf("Technology:\t\t%s\n", battio.bif.btech == 0 ?
"primary (non-rechargeable)" : "secondary (rechargeable)");
if (battio.bif.dvol == UNKNOWN_CAP)
printf("Design voltage:\t\tunknown\n");
else
printf("Design voltage:\t\t%d mV\n", battio.bif.dvol);
printf("Capacity (warn):\t%d %sh\n", battio.bif.wcap, pwr_units);
printf("Capacity (low):\t\t%d %sh\n", battio.bif.lcap, pwr_units);
printf("Low/warn granularity:\t%d %sh\n", battio.bif.gra1, pwr_units);
printf("Warn/full granularity:\t%d %sh\n", battio.bif.gra2, pwr_units);
printf("Model number:\t\t%s\n", battio.bif.model);
printf("Serial number:\t\t%s\n", battio.bif.serial);
printf("Type:\t\t\t%s\n", battio.bif.type);
printf("OEM info:\t\t%s\n", battio.bif.oeminfo);
/* Print current battery state information. */
battio.unit = num;
if (ioctl(acpifd, ACPIIO_BATT_GET_BATTINFO, &battio) == -1)
err(EX_IOERR, "get battery user info (%d) failed", num);
if (battio.battinfo.state != ACPI_BATT_STAT_NOT_PRESENT) {
printf("State:\t\t\t");
if (battio.battinfo.state == 0)
printf("high ");
if (battio.battinfo.state & ACPI_BATT_STAT_CRITICAL)
printf("critical ");
if (battio.battinfo.state & ACPI_BATT_STAT_DISCHARG)
printf("discharging ");
if (battio.battinfo.state & ACPI_BATT_STAT_CHARGING)
printf("charging ");
printf("\n");
if (battio.battinfo.cap == -1)
printf("Remaining capacity:\tunknown\n");
else
printf("Remaining capacity:\t%d%%\n",
battio.battinfo.cap);
if (battio.battinfo.min == -1)
printf("Remaining time:\t\tunknown\n");
else {
hours = battio.battinfo.min / 60;
min = battio.battinfo.min % 60;
printf("Remaining time:\t\t%d:%02d\n", hours, min);
}
if (battio.battinfo.rate == -1)
printf("Present rate:\t\tunknown\n");
else
printf("Present rate:\t\t%d %s\n",
battio.battinfo.rate, pwr_units);
} else
printf("State:\t\t\tnot present\n");
/* Print battery voltage information. */
battio.unit = num;
if (ioctl(acpifd, ACPIIO_BATT_GET_BST, &battio) == -1)
err(EX_IOERR, "get battery status (%d) failed", num);
if (battio.bst.state != ACPI_BATT_STAT_NOT_PRESENT) {
if (battio.bst.volt == UNKNOWN_VOLTAGE)
printf("Voltage:\t\tunknown\n");
else
printf("Voltage:\t\t%d mV\n", battio.bst.volt);
}
return (0);
}
static void
usage(const char* prog)
{
printf("usage: %s [-h] [-i batt] [-k ack] [-s 1-4]\n", prog);
exit(0);
}
int
main(int argc, char *argv[])
{
char c, *prog;
int sleep_type;
prog = argv[0];
if (argc < 2)
usage(prog);
/* NOTREACHED */
sleep_type = -1;
acpi_init();
while ((c = getopt(argc, argv, "hi:k:s:")) != -1) {
switch (c) {
case 'i':
acpi_battinfo(atoi(optarg));
break;
case 'k':
acpi_sleep_ack(atoi(optarg));
break;
case 's':
if (optarg[0] == 'S')
sleep_type = optarg[1] - '0';
else
sleep_type = optarg[0] - '0';
if (sleep_type < 1 || sleep_type > 4)
errx(EX_USAGE, "invalid sleep type (%d)",
sleep_type);
break;
case 'h':
default:
usage(prog);
/* NOTREACHED */
}
}
argc -= optind;
argv += optind;
if (sleep_type != -1)
acpi_sleep(sleep_type);
close(acpifd);
exit (0);
}