freebsd-skq/sys/pci/dc21040reg.h
peter c3defaa467 Import Matt's if_de driver 970703 release. This (apparently) supports
some newer Cogent (Adaptec) cards and has some other internal changes.
1997-08-03 12:17:39 +00:00

599 lines
24 KiB
C

/*-
* Copyright (c) 1994, 1995, 1996 Matt Thomas <matt@3am-software.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software withough specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: dc21040reg.h,v 1.24 1997/05/16 19:47:09 thomas Exp $
*/
#if !defined(_DC21040_H)
#define _DC21040_H
#if defined(BYTE_ORDER) && BYTE_ORDER == BIG_ENDIAN
#define TULIP_BITFIELD2(a, b) b, a
#define TULIP_BITFIELD3(a, b, c) c, b, a
#define TULIP_BITFIELD4(a, b, c, d) d, c, b, a
#else
#define TULIP_BITFIELD2(a, b) a, b
#define TULIP_BITFIELD3(a, b, c) a, b, c
#define TULIP_BITFIELD4(a, b, c, d) a, b, c, d
#endif
typedef struct {
u_int32_t d_status;
u_int32_t TULIP_BITFIELD3(d_length1 : 11,
d_length2 : 11,
d_flag : 10);
u_int32_t d_addr1;
u_int32_t d_addr2;
} tulip_desc_t;
#define TULIP_DSTS_OWNER 0x80000000 /* Owner (1 = 21040) */
#define TULIP_DSTS_ERRSUM 0x00008000 /* Error Summary */
/*
* Transmit Status
*/
#define TULIP_DSTS_TxBABBLE 0x00004000 /* Transmitter Babbled */
#define TULIP_DSTS_TxCARRLOSS 0x00000800 /* Carrier Loss */
#define TULIP_DSTS_TxNOCARR 0x00000400 /* No Carrier */
#define TULIP_DSTS_TxLATECOLL 0x00000200 /* Late Collision */
#define TULIP_DSTS_TxEXCCOLL 0x00000100 /* Excessive Collisions */
#define TULIP_DSTS_TxNOHRTBT 0x00000080 /* No Heartbeat */
#define TULIP_DSTS_TxCOLLMASK 0x00000078 /* Collision Count (mask) */
#define TULIP_DSTS_V_TxCOLLCNT 0x00000003 /* Collision Count (bit) */
#define TULIP_DSTS_TxLINKFAIL 0x00000004 /* Link Failure */
#define TULIP_DSTS_TxUNDERFLOW 0x00000002 /* Underflow Error */
#define TULIP_DSTS_TxDEFERRED 0x00000001 /* Initially Deferred */
/*
* Receive Status
*/
#define TULIP_DSTS_RxBADLENGTH 0x00004000 /* Length Error */
#define TULIP_DSTS_RxDATATYPE 0x00003000 /* Data Type */
#define TULIP_DSTS_RxRUNT 0x00000800 /* Runt Frame */
#define TULIP_DSTS_RxMULTICAST 0x00000400 /* Multicast Frame */
#define TULIP_DSTS_RxFIRSTDESC 0x00000200 /* First Descriptor */
#define TULIP_DSTS_RxLASTDESC 0x00000100 /* Last Descriptor */
#define TULIP_DSTS_RxTOOLONG 0x00000080 /* Frame Too Long */
#define TULIP_DSTS_RxCOLLSEEN 0x00000040 /* Collision Seen */
#define TULIP_DSTS_RxFRAMETYPE 0x00000020 /* Frame Type */
#define TULIP_DSTS_RxWATCHDOG 0x00000010 /* Receive Watchdog */
#define TULIP_DSTS_RxDRBBLBIT 0x00000004 /* Dribble Bit */
#define TULIP_DSTS_RxBADCRC 0x00000002 /* CRC Error */
#define TULIP_DSTS_RxOVERFLOW 0x00000001 /* Overflow */
#define TULIP_DFLAG_ENDRING 0x0008 /* End of Transmit Ring */
#define TULIP_DFLAG_CHAIN 0x0004 /* Chain using d_addr2 */
#define TULIP_DFLAG_TxWANTINTR 0x0200 /* Signal Interrupt on Completion */
#define TULIP_DFLAG_TxLASTSEG 0x0100 /* Last Segment */
#define TULIP_DFLAG_TxFIRSTSEG 0x0080 /* First Segment */
#define TULIP_DFLAG_TxINVRSFILT 0x0040 /* Inverse Filtering */
#define TULIP_DFLAG_TxSETUPPKT 0x0020 /* Setup Packet */
#define TULIP_DFLAG_TxHASCRC 0x0010 /* Don't Append the CRC */
#define TULIP_DFLAG_TxNOPADDING 0x0002 /* Don't AutoPad */
#define TULIP_DFLAG_TxHASHFILT 0x0001 /* Hash/Perfect Filtering */
/*
* The 21040 Registers (IO Space Addresses)
*/
#define TULIP_REG_BUSMODE 0x00 /* CSR0 -- Bus Mode */
#define TULIP_REG_TXPOLL 0x08 /* CSR1 -- Transmit Poll Demand */
#define TULIP_REG_RXPOLL 0x10 /* CSR2 -- Receive Poll Demand */
#define TULIP_REG_RXLIST 0x18 /* CSR3 -- Receive List Base Addr */
#define TULIP_REG_TXLIST 0x20 /* CSR4 -- Transmit List Base Addr */
#define TULIP_REG_STATUS 0x28 /* CSR5 -- Status */
#define TULIP_REG_CMD 0x30 /* CSR6 -- Command */
#define TULIP_REG_INTR 0x38 /* CSR7 -- Interrupt Control */
#define TULIP_REG_MISSES 0x40 /* CSR8 -- Missed Frame Counter */
#define TULIP_REG_ADDRROM 0x48 /* CSR9 -- ENET ROM Register */
#define TULIP_REG_RSRVD 0x50 /* CSR10 -- Reserved */
#define TULIP_REG_FULL_DUPLEX 0x58 /* CSR11 -- Full Duplex */
#define TULIP_REG_SIA_STATUS 0x60 /* CSR12 -- SIA Status */
#define TULIP_REG_SIA_CONN 0x68 /* CSR13 -- SIA Connectivity */
#define TULIP_REG_SIA_TXRX 0x70 /* CSR14 -- SIA Tx Rx */
#define TULIP_REG_SIA_GEN 0x78 /* CSR15 -- SIA General */
/*
* CSR5 -- Status Register
* CSR7 -- Interrupt Control
*/
#define TULIP_STS_ERRORMASK 0x03800000L /* ( R) Error Bits (Valid when SYSERROR is set) */
#define TULIP_STS_ERR_PARITY 0x00000000L /* 000 - Parity Error (Perform Reset) */
#define TULIP_STS_ERR_MASTER 0x00800000L /* 001 - Master Abort */
#define TULIP_STS_ERR_TARGET 0x01000000L /* 010 - Target Abort */
#define TULIP_STS_ERR_SHIFT 23
#define TULIP_STS_TXSTATEMASK 0x00700000L /* ( R) Transmission Process State */
#define TULIP_STS_TXS_RESET 0x00000000L /* 000 - Rset or transmit jabber expired */
#define TULIP_STS_TXS_FETCH 0x00100000L /* 001 - Fetching transmit descriptor */
#define TULIP_STS_TXS_WAITEND 0x00200000L /* 010 - Wait for end of transmission */
#define TULIP_STS_TXS_READING 0x00300000L /* 011 - Read buffer and enqueue data */
#define TULIP_STS_TXS_RSRVD 0x00400000L /* 100 - Reserved */
#define TULIP_STS_TXS_SETUP 0x00500000L /* 101 - Setup Packet */
#define TULIP_STS_TXS_SUSPEND 0x00600000L /* 110 - Transmit FIFO underflow or an
unavailable transmit descriptor */
#define TULIP_STS_TXS_CLOSE 0x00700000L /* 111 - Close transmit descriptor */
#define TULIP_STS_RXSTATEMASK 0x000E0000L /* ( R) Receive Process State*/
#define TULIP_STS_RXS_STOPPED 0x00000000L /* 000 - Stopped */
#define TULIP_STS_RXS_FETCH 0x00020000L /* 001 - Running -- Fetch receive descriptor */
#define TULIP_STS_RXS_ENDCHECK 0x00040000L /* 010 - Running -- Check for end of receive
packet before prefetch of next descriptor */
#define TULIP_STS_RXS_WAIT 0x00060000L /* 011 - Running -- Wait for receive packet */
#define TULIP_STS_RXS_SUSPEND 0x00080000L /* 100 - Suspended -- As a result of
unavailable receive buffers */
#define TULIP_STS_RXS_CLOSE 0x000A0000L /* 101 - Running -- Close receive descriptor */
#define TULIP_STS_RXS_FLUSH 0x000C0000L /* 110 - Running -- Flush the current frame
from the receive FIFO as a result of
an unavailable receive buffer */
#define TULIP_STS_RXS_DEQUEUE 0x000E0000L /* 111 - Running -- Dequeue the receive frame
from the receive FIFO into the receive
buffer. */
#define TULIP_STS_NORMALINTR 0x00010000L /* (RW) Normal Interrupt */
#define TULIP_STS_ABNRMLINTR 0x00008000L /* (RW) Abnormal Interrupt */
#define TULIP_STS_SYSERROR 0x00002000L /* (RW) System Error */
#define TULIP_STS_LINKFAIL 0x00001000L /* (RW) Link Failure (21040) */
#define TULIP_STS_FULDPLXSHRT 0x00000800L /* (RW) Full Duplex Short Fram Rcvd (21040) */
#define TULIP_STS_GPTIMEOUT 0x00000800L /* (RW) General Purpose Timeout (21140) */
#define TULIP_STS_AUI 0x00000400L /* (RW) AUI/TP Switch (21040) */
#define TULIP_STS_RXTIMEOUT 0x00000200L /* (RW) Receive Watchbog Timeout */
#define TULIP_STS_RXSTOPPED 0x00000100L /* (RW) Receive Process Stopped */
#define TULIP_STS_RXNOBUF 0x00000080L /* (RW) Receive Buffer Unavailable */
#define TULIP_STS_RXINTR 0x00000040L /* (RW) Receive Interrupt */
#define TULIP_STS_TXUNDERFLOW 0x00000020L /* (RW) Transmit Underflow */
#define TULIP_STS_LINKPASS 0x00000010L /* (RW) LinkPass (21041) */
#define TULIP_STS_TXBABBLE 0x00000008L /* (RW) Transmit Jabber Timeout */
#define TULIP_STS_TXNOBUF 0x00000004L /* (RW) Transmit Buffer Unavailable */
#define TULIP_STS_TXSTOPPED 0x00000002L /* (RW) Transmit Process Stopped */
#define TULIP_STS_TXINTR 0x00000001L /* (RW) Transmit Interrupt */
/*
* CSR6 -- Command (Operation Mode) Register
*/
#define TULIP_CMD_MUSTBEONE 0x02000000L /* (RW) Must Be One (21140) */
#define TULIP_CMD_SCRAMBLER 0x01000000L /* (RW) Scrambler Mode (21140) */
#define TULIP_CMD_PCSFUNCTION 0x00800000L /* (RW) PCS Function (21140) */
#define TULIP_CMD_TXTHRSHLDCTL 0x00400000L /* (RW) Transmit Threshold Mode (21140) */
#define TULIP_CMD_STOREFWD 0x00200000L /* (RW) Store and Foward (21140) */
#define TULIP_CMD_NOHEARTBEAT 0x00080000L /* (RW) No Heartbeat (21140) */
#define TULIP_CMD_PORTSELECT 0x00040000L /* (RW) Post Select (100Mb) (21140) */
#define TULIP_CMD_ENHCAPTEFFCT 0x00040000L /* (RW) Enhanced Capture Effecty (21041) */
#define TULIP_CMD_CAPTREFFCT 0x00020000L /* (RW) Capture Effect (!802.3) */
#define TULIP_CMD_BACKPRESSURE 0x00010000L /* (RW) Back Pressure (!802.3) (21040) */
#define TULIP_CMD_THRESHOLDCTL 0x0000C000L /* (RW) Threshold Control */
#define TULIP_CMD_THRSHLD72 0x00000000L /* 00 - 72 Bytes */
#define TULIP_CMD_THRSHLD96 0x00004000L /* 01 - 96 Bytes */
#define TULIP_CMD_THRSHLD128 0x00008000L /* 10 - 128 bytes */
#define TULIP_CMD_THRSHLD160 0x0000C000L /* 11 - 160 Bytes */
#define TULIP_CMD_TXRUN 0x00002000L /* (RW) Start/Stop Transmitter */
#define TULIP_CMD_FORCECOLL 0x00001000L /* (RW) Force Collisions */
#define TULIP_CMD_OPERMODE 0x00000C00L /* (RW) Operating Mode */
#define TULIP_CMD_FULLDUPLEX 0x00000200L /* (RW) Full Duplex Mode */
#define TULIP_CMD_FLAKYOSCDIS 0x00000100L /* (RW) Flakey Oscillator Disable */
#define TULIP_CMD_ALLMULTI 0x00000080L /* (RW) Pass All Multicasts */
#define TULIP_CMD_PROMISCUOUS 0x00000040L /* (RW) Promiscuous Mode */
#define TULIP_CMD_BACKOFFCTR 0x00000020L /* (RW) Start/Stop Backoff Counter (!802.3) */
#define TULIP_CMD_INVFILTER 0x00000010L /* (R ) Inverse Filtering */
#define TULIP_CMD_PASSBADPKT 0x00000008L /* (RW) Pass Bad Frames */
#define TULIP_CMD_HASHONLYFLTR 0x00000004L /* (R ) Hash Only Filtering */
#define TULIP_CMD_RXRUN 0x00000002L /* (RW) Start/Stop Receive Filtering */
#define TULIP_CMD_HASHPRFCTFLTR 0x00000001L /* (R ) Hash/Perfect Receive Filtering */
#define TULIP_SIASTS_OTHERRXACTIVITY 0x00000200L
#define TULIP_SIASTS_RXACTIVITY 0x00000100L
#define TULIP_SIASTS_LINKFAIL 0x00000004L
#define TULIP_SIACONN_RESET 0x00000000L
/*
* 21040 SIA definitions
*/
#define TULIP_21040_PROBE_10BASET_TIMEOUT 2500
#define TULIP_21040_PROBE_AUIBNC_TIMEOUT 300
#define TULIP_21040_PROBE_EXTSIA_TIMEOUT 300
#define TULIP_21040_SIACONN_10BASET 0x00008F01L
#define TULIP_21040_SIATXRX_10BASET 0x0000FFFFL
#define TULIP_21040_SIAGEN_10BASET 0x00000000L
#define TULIP_21040_SIACONN_10BASET_FD 0x00008F01L
#define TULIP_21040_SIATXRX_10BASET_FD 0x0000FFFDL
#define TULIP_21040_SIAGEN_10BASET_FD 0x00000000L
#define TULIP_21040_SIACONN_AUIBNC 0x00008F09L
#define TULIP_21040_SIATXRX_AUIBNC 0x00000705L
#define TULIP_21040_SIAGEN_AUIBNC 0x00000006L
#define TULIP_21040_SIACONN_EXTSIA 0x00003041L
#define TULIP_21040_SIATXRX_EXTSIA 0x00000000L
#define TULIP_21040_SIAGEN_EXTSIA 0x00000006L
/*
* 21041 SIA definitions
*/
#define TULIP_21041_PROBE_10BASET_TIMEOUT 2500
#define TULIP_21041_PROBE_AUIBNC_TIMEOUT 300
#define TULIP_21041_SIACONN_10BASET 0x0000EF01L
#define TULIP_21041_SIATXRX_10BASET 0x0000FF3FL
#define TULIP_21041_SIAGEN_10BASET 0x00000000L
#define TULIP_21041P2_SIACONN_10BASET 0x0000EF01L
#define TULIP_21041P2_SIATXRX_10BASET 0x0000FFFFL
#define TULIP_21041P2_SIAGEN_10BASET 0x00000000L
#define TULIP_21041_SIACONN_10BASET_FD 0x0000EF01L
#define TULIP_21041_SIATXRX_10BASET_FD 0x0000FF3DL
#define TULIP_21041_SIAGEN_10BASET_FD 0x00000000L
#define TULIP_21041P2_SIACONN_10BASET_FD 0x0000EF01L
#define TULIP_21041P2_SIATXRX_10BASET_FD 0x0000FFFFL
#define TULIP_21041P2_SIAGEN_10BASET_FD 0x00000000L
#define TULIP_21041_SIACONN_AUI 0x0000EF09L
#define TULIP_21041_SIATXRX_AUI 0x0000F73DL
#define TULIP_21041_SIAGEN_AUI 0x0000000EL
#define TULIP_21041P2_SIACONN_AUI 0x0000EF09L
#define TULIP_21041P2_SIATXRX_AUI 0x0000F7FDL
#define TULIP_21041P2_SIAGEN_AUI 0x0000000EL
#define TULIP_21041_SIACONN_BNC 0x0000EF09L
#define TULIP_21041_SIATXRX_BNC 0x0000F73DL
#define TULIP_21041_SIAGEN_BNC 0x00000006L
#define TULIP_21041P2_SIACONN_BNC 0x0000EF09L
#define TULIP_21041P2_SIATXRX_BNC 0x0000F7FDL
#define TULIP_21041P2_SIAGEN_BNC 0x00000006L
/*
* 21142 SIA definitions
*/
#define TULIP_21142_PROBE_10BASET_TIMEOUT 2500
#define TULIP_21142_PROBE_AUIBNC_TIMEOUT 300
#define TULIP_21142_SIACONN_10BASET 0x00000001L
#define TULIP_21142_SIATXRX_10BASET 0x0000F3FFL
#define TULIP_21142_SIAGEN_10BASET 0x00000000L
#define TULIP_21142_SIACONN_10BASET_FD 0x00000001L
#define TULIP_21142_SIATXRX_10BASET_FD 0x0000F3FDL
#define TULIP_21142_SIAGEN_10BASET_FD 0x00000000L
#define TULIP_21142_SIACONN_AUI 0x00000009L
#define TULIP_21142_SIATXRX_AUI 0x0000F3FDL
#define TULIP_21142_SIAGEN_AUI 0x0000000EL
#define TULIP_21142_SIACONN_BNC 0x00000009L
#define TULIP_21142_SIATXRX_BNC 0x0000F3FDL
#define TULIP_21142_SIAGEN_BNC 0x00000006L
#define TULIP_WATCHDOG_TXDISABLE 0x00000001L
#define TULIP_WATCHDOG_RXDISABLE 0x00000010L
#define TULIP_BUSMODE_SWRESET 0x00000001L
#define TULIP_BUSMODE_DESCSKIPLEN_MASK 0x0000007CL
#define TULIP_BUSMODE_BIGENDIAN 0x00000080L
#define TULIP_BUSMODE_BURSTLEN_MASK 0x00003F00L
#define TULIP_BUSMODE_BURSTLEN_DEFAULT 0x00000000L
#define TULIP_BUSMODE_BURSTLEN_1LW 0x00000100L
#define TULIP_BUSMODE_BURSTLEN_2LW 0x00000200L
#define TULIP_BUSMODE_BURSTLEN_4LW 0x00000400L
#define TULIP_BUSMODE_BURSTLEN_8LW 0x00000800L
#define TULIP_BUSMODE_BURSTLEN_16LW 0x00001000L
#define TULIP_BUSMODE_BURSTLEN_32LW 0x00002000L
#define TULIP_BUSMODE_CACHE_NOALIGN 0x00000000L
#define TULIP_BUSMODE_CACHE_ALIGN8 0x00004000L
#define TULIP_BUSMODE_CACHE_ALIGN16 0x00008000L
#define TULIP_BUSMODE_CACHE_ALIGN32 0x0000C000L
#define TULIP_BUSMODE_TXPOLL_NEVER 0x00000000L
#define TULIP_BUSMODE_TXPOLL_200000ns 0x00020000L
#define TULIP_BUSMODE_TXPOLL_800000ns 0x00040000L
#define TULIP_BUSMODE_TXPOLL_1600000ns 0x00060000L
#define TULIP_BUSMODE_TXPOLL_12800ns 0x00080000L /* 21041 only */
#define TULIP_BUSMODE_TXPOLL_25600ns 0x000A0000L /* 21041 only */
#define TULIP_BUSMODE_TXPOLL_51200ns 0x000C0000L /* 21041 only */
#define TULIP_BUSMODE_TXPOLL_102400ns 0x000E0000L /* 21041 only */
#define TULIP_BUSMODE_DESC_BIGENDIAN 0x00100000L /* 21041 only */
#define TULIP_BUSMODE_READMULTIPLE 0x00200000L /* */
#define TULIP_REG_CFDA 0x40
#define TULIP_CFDA_SLEEP 0x80000000L
#define TULIP_CFDA_SNOOZE 0x40000000L
#define TULIP_GP_PINSET 0x00000100L
/*
* These are the defintitions used for the DEC 21140
* evaluation board.
*/
#define TULIP_GP_EB_PINS 0x0000001F /* General Purpose Pin directions */
#define TULIP_GP_EB_OK10 0x00000080 /* 10 Mb/sec Signal Detect gep<7> */
#define TULIP_GP_EB_OK100 0x00000040 /* 100 Mb/sec Signal Detect gep<6> */
#define TULIP_GP_EB_INIT 0x0000000B /* No loopback --- point-to-point */
/*
* These are the defintitions used for the SMC9332 (21140) board.
*/
#define TULIP_GP_SMC_9332_PINS 0x0000003F /* General Purpose Pin directions */
#define TULIP_GP_SMC_9332_OK10 0x00000080 /* 10 Mb/sec Signal Detect gep<7> */
#define TULIP_GP_SMC_9332_OK100 0x00000040 /* 100 Mb/sec Signal Detect gep<6> */
#define TULIP_GP_SMC_9332_INIT 0x00000009 /* No loopback --- point-to-point */
#define TULIP_OUI_SMC_0 0x00
#define TULIP_OUI_SMC_1 0x00
#define TULIP_OUI_SMC_2 0xC0
/*
* There are the definitions used for the DEC DE500
* 10/100 family of boards
*/
#define TULIP_GP_DE500_PINS 0x0000001FL
#define TULIP_GP_DE500_LINK_PASS 0x00000080L
#define TULIP_GP_DE500_SYM_LINK 0x00000040L
#define TULIP_GP_DE500_SIGNAL_DETECT 0x00000020L
#define TULIP_GP_DE500_PHY_RESET 0x00000010L
#define TULIP_GP_DE500_HALFDUPLEX 0x00000008L
#define TULIP_GP_DE500_PHY_LOOPBACK 0x00000004L
#define TULIP_GP_DE500_FORCE_LED 0x00000002L
#define TULIP_GP_DE500_FORCE_100 0x00000001L
/*
* These are the defintitions used for the Cogent EM100
* 21140 board.
*/
#define TULIP_GP_EM100_PINS 0x0000003F /* General Purpose Pin directions */
#define TULIP_GP_EM100_INIT 0x00000009 /* No loopback --- point-to-point */
#define TULIP_OUI_COGENT_0 0x00
#define TULIP_OUI_COGENT_1 0x00
#define TULIP_OUI_COGENT_2 0x92
#define TULIP_COGENT_EM100TX_ID 0x12
#define TULIP_COGENT_EM100FX_ID 0x15
/*
* These are the defintitions used for the Znyx ZX342
* 10/100 board
*/
#define TULIP_OUI_ZNYX_0 0x00
#define TULIP_OUI_ZNYX_1 0xC0
#define TULIP_OUI_ZNYX_2 0x95
#define TULIP_ZNYX_ID_ZX312 0x0602
#define TULIP_ZNYX_ID_ZX312T 0x0622
#define TULIP_ZNYX_ID_ZX314_INTA 0x0701
#define TULIP_ZNYX_ID_ZX314 0x0711
#define TULIP_ZNYX_ID_ZX315_INTA 0x0801
#define TULIP_ZNYX_ID_ZX315 0x0811
#define TULIP_ZNYX_ID_ZX342 0x0901
#define TULIP_ZNYX_ID_ZX342B 0x0921
#define TULIP_ZNYX_ID_ZX342_X3 0x0902
#define TULIP_ZNYX_ID_ZX342_X4 0x0903
#define TULIP_ZNYX_ID_ZX344 0x0A01
#define TULIP_ZNYX_ID_ZX351 0x0B01
#define TULIP_ZNYX_ID_ZX345 0x0C01
#define TULIP_ZNYX_ID_ZX311 0x0D01
#define TULIP_ZNYX_ID_ZX346 0x0E01
#define TULIP_GP_ZX34X_PINS 0x0000001F /* General Purpose Pin directions */
#define TULIP_GP_ZX344_PINS 0x0000000B /* General Purpose Pin directions */
#define TULIP_GP_ZX345_PINS 0x00000003 /* General Purpose Pin directions */
#define TULIP_GP_ZX346_PINS 0x00000043 /* General Purpose Pin directions */
#define TULIP_GP_ZX34X_LNKFAIL 0x00000080 /* 10Mb/s Link Failure */
#define TULIP_GP_ZX34X_SYMDET 0x00000040 /* 100Mb/s Symbol Detect */
#define TULIP_GP_ZX345_PHYACT 0x00000040 /* PHY Activity */
#define TULIP_GP_ZX34X_SIGDET 0x00000020 /* 100Mb/s Signal Detect */
#define TULIP_GP_ZX346_AUTONEG_ENABLED 0x00000020 /* 802.3u autoneg enabled */
#define TULIP_GP_ZX342_COLENA 0x00000008 /* 10t Ext LB */
#define TULIP_GP_ZX344_ROTINT 0x00000008 /* PPB IRQ rotation */
#define TULIP_GP_ZX345_SPEED10 0x00000008 /* 10Mb speed detect */
#define TULIP_GP_ZX346_SPEED100 0x00000008 /* 100Mb speed detect */
#define TULIP_GP_ZX34X_NCOLENA 0x00000004 /* 10t Int LB */
#define TULIP_GP_ZX34X_RXMATCH 0x00000004 /* RX Match */
#define TULIP_GP_ZX346_FULLDUPLEX 0x00000004 /* Full Duplex Sensed */
#define TULIP_GP_ZX34X_LB102 0x00000002 /* 100tx twister LB */
#define TULIP_GP_ZX34X_NLB101 0x00000001 /* PDT/PDR LB */
#define TULIP_GP_ZX34X_INIT 0x00000009
/*
* Compex's OUI. We need to twiddle a bit on their 21041 card.
*/
#define TULIP_OUI_COMPEX_0 0x00
#define TULIP_OUI_COMPEX_1 0x80
#define TULIP_OUI_COMPEX_2 0x48
#define TULIP_21041_COMPEX_XREGDATA 1
/*
* Asante's OUI and stuff...
*/
#define TULIP_OUI_ASANTE_0 0x00
#define TULIP_OUI_ASANTE_1 0x00
#define TULIP_OUI_ASANTE_2 0x94
#define TULIP_GP_ASANTE_PINS 0x000000bf /* GP pin config */
#define TULIP_GP_ASANTE_PHYRESET 0x00000008 /* Reset PHY */
/*
* SROM definitions for the 21140 and 21041.
*/
#define SROMXREG 0x0400
#define SROMSEL 0x0800
#define SROMRD 0x4000
#define SROMWR 0x2000
#define SROMDIN 0x0008
#define SROMDOUT 0x0004
#define SROMDOUTON 0x0004
#define SROMDOUTOFF 0x0004
#define SROMCLKON 0x0002
#define SROMCLKOFF 0x0002
#define SROMCSON 0x0001
#define SROMCSOFF 0x0001
#define SROMCS 0x0001
#define SROMCMD_MODE 4
#define SROMCMD_WR 5
#define SROMCMD_RD 6
#define SROM_BITWIDTH 6
/*
* MII Definitions for the 21041 and 21140/21140A/21142
*/
#define MII_PREAMBLE (~0)
#define MII_TEST 0xAAAAAAAA
#define MII_RDCMD 0xF6 /* 1111.0110 */
#define MII_WRCMD 0xF5 /* 1111.0101 */
#define MII_DIN 0x00080000
#define MII_RD 0x00040000
#define MII_WR 0x00000000
#define MII_DOUT 0x00020000
#define MII_CLK 0x00010000
#define MII_CLKON MII_CLK
#define MII_CLKOFF MII_CLK
#define PHYREG_CONTROL 0
#define PHYREG_STATUS 1
#define PHYREG_IDLOW 2
#define PHYREG_IDHIGH 3
#define PHYREG_AUTONEG_ADVERTISEMENT 4
#define PHYREG_AUTONEG_ABILITIES 5
#define PHYREG_AUTONEG_EXPANSION 6
#define PHYREG_AUTONEG_NEXTPAGE 7
#define PHYSTS_100BASET4 0x8000
#define PHYSTS_100BASETX_FD 0x4000
#define PHYSTS_100BASETX 0x2000
#define PHYSTS_10BASET_FD 0x1000
#define PHYSTS_10BASET 0x0800
#define PHYSTS_AUTONEG_DONE 0x0020
#define PHYSTS_REMOTE_FAULT 0x0010
#define PHYSTS_CAN_AUTONEG 0x0008
#define PHYSTS_LINK_UP 0x0004
#define PHYSTS_JABBER_DETECT 0x0002
#define PHYSTS_EXTENDED_REGS 0x0001
#define PHYCTL_RESET 0x8000
#define PHYCTL_SELECT_100MB 0x2000
#define PHYCTL_AUTONEG_ENABLE 0x1000
#define PHYCTL_ISOLATE 0x0400
#define PHYCTL_AUTONEG_RESTART 0x0200
#define PHYCTL_FULL_DUPLEX 0x0100
#define MII_RD 0x00040000
#define MII_WR 0x00000000
#define MII_DIN 0x00080000
#define MII_DOUT 0x00020000
#define MII_DOUTON MII_DOUT
#define MII_DOUTOFF MII_DOUT
#define MII_CLK 0x00010000
#define MII_CLKON MII_CLK
#define MII_CLKOFF MII_CLK
/*
* Definitions for the DE425.
*/
#define DE425_CFID 0x08 /* Configuration Id */
#define DE425_CFCS 0x0C /* Configuration Command-Status */
#define DE425_CFRV 0x18 /* Configuration Revision */
#define DE425_CFLT 0x1C /* Configuration Latency Timer */
#define DE425_CBIO 0x28 /* Configuration Base IO Address */
#define DE425_CFDA 0x2C /* Configuration Driver Area */
#define DE425_ENETROM_OFFSET 0xC90 /* Offset in I/O space for ENETROM */
#define DE425_CFG0 0xC88 /* IRQ register */
#define DE425_EISAID 0x10a34250 /* EISA device id */
#define DE425_EISA_IOSIZE 0x100
#define DEC_VENDORID 0x1011
#define CHIPID_21040 0x0002
#define CHIPID_21140 0x0009
#define CHIPID_21041 0x0014
#define CHIPID_21142 0x0019
#define PCI_VENDORID(x) ((x) & 0xFFFF)
#define PCI_CHIPID(x) (((x) >> 16) & 0xFFFF)
/*
* Generic SROM Format
*
*
*/
typedef struct {
u_int8_t sh_idbuf[18];
u_int8_t sh_version;
u_int8_t sh_adapter_count;
u_int8_t sh_ieee802_address[6];
} tulip_srom_header_t;
typedef struct {
u_int8_t sai_device;
u_int8_t sai_leaf_offset_lowbyte;
u_int8_t sai_leaf_offset_highbyte;
} tulip_srom_adapter_info_t;
typedef enum {
TULIP_SROM_CONNTYPE_10BASET =0x0000,
TULIP_SROM_CONNTYPE_BNC =0x0001,
TULIP_SROM_CONNTYPE_AUI =0x0002,
TULIP_SROM_CONNTYPE_100BASETX =0x0003,
TULIP_SROM_CONNTYPE_100BASET4 =0x0006,
TULIP_SROM_CONNTYPE_100BASEFX =0x0007,
TULIP_SROM_CONNTYPE_MII_10BASET =0x0009,
TULIP_SROM_CONNTYPE_MII_100BASETX =0x000D,
TULIP_SROM_CONNTYPE_MII_100BASET4 =0x000F,
TULIP_SROM_CONNTYPE_MII_100BASEFX =0x0010,
TULIP_SROM_CONNTYPE_10BASET_NWAY =0x0100,
TULIP_SROM_CONNTYPE_10BASET_FD =0x0204,
TULIP_SROM_CONNTYPE_MII_10BASET_FD =0x020A,
TULIP_SROM_CONNTYPE_100BASETX_FD =0x020E,
TULIP_SROM_CONNTYPE_MII_100BASETX_FD =0x0211,
TULIP_SROM_CONNTYPE_10BASET_NOLINKPASS =0x0400,
TULIP_SROM_CONNTYPE_AUTOSENSE =0x0800,
TULIP_SROM_CONNTYPE_AUTOSENSE_POWERUP =0x8800,
TULIP_SROM_CONNTYPE_AUTOSENSE_NWAY =0x9000,
TULIP_SROM_CONNTYPE_NOT_USED =0xFFFF
} tulip_srom_connection_t;
typedef enum {
TULIP_SROM_MEDIA_10BASET =0x0000,
TULIP_SROM_MEDIA_BNC =0x0001,
TULIP_SROM_MEDIA_AUI =0x0002,
TULIP_SROM_MEDIA_100BASETX =0x0003,
TULIP_SROM_MEDIA_10BASET_FD =0x0004,
TULIP_SROM_MEDIA_100BASETX_FD =0x0005,
TULIP_SROM_MEDIA_100BASET4 =0x0006,
TULIP_SROM_MEDIA_100BASEFX =0x0007,
TULIP_SROM_MEDIA_100BASEFX_FD =0x0008
} tulip_srom_media_t;
#define TULIP_SROM_21041_EXTENDED 0x40
#define TULIP_SROM_2114X_NOINDICATOR 0x8000
#define TULIP_SROM_2114X_DEFAULT 0x4000
#define TULIP_SROM_2114X_POLARITY 0x0080
#define TULIP_SROM_2114X_CMDBITS(n) (((n) & 0x0071) << 18)
#define TULIP_SROM_2114X_BITPOS(b) (1 << (((b) & 0x0E) >> 1))
#endif /* !defined(_DC21040_H) */