d055bdf0ca
- Add 3 new functions to the pci_if interface along with suitable wrappers to provide the device driver visible API: - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count' here is an in and out parameter. The driver stores the desired number of messages in '*count' before calling the function. On success, '*count' holds the number of messages allocated to the device. Also on success, the driver can access the messages as SYS_RES_IRQ resources starting at rid 1. Note that the legacy INTx interrupt resource will not be available when using MSI. Note that this function will allocate either MSI or MSI-X messages depending on the devices capabilities and the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note that the driver should activate the memory resource that holds the MSI-X table and pending bit array (PBA) before calling this function if the device supports MSI-X. - pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function releases the messages allocated for this device. All of the SYS_RES_IRQ resources need to be released for this function to succeed. - pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns the maximum number of MSI or MSI-X messages supported by this device. MSI-X is preferred if present, but this function will honor the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function should return the largest value that pci_alloc_msi() can return (assuming the MD code is able to allocate sufficient backing resources for all of the messages). - Add default implementations for these 3 methods to the pci_driver generic PCI bus driver. (The various other PCI bus drivers such as for ACPI and OFW will inherit these default implementations.) This default implementation depends on 4 new pcib_if methods that bubble up through the PCI bridges to the MD code to allocate IRQ values and perform any needed MD setup code needed: - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages. - PCIB_RELEASE_MSI() releases a group of MSI messages. - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message. - PCIB_RELEASE_MSIX() releases a single MSI-X message. - Add default implementations for these 4 methods that just pass the request up to the parent bus's parent bridge driver and use the default implementation in the various MI PCI bridge drivers. - Add MI functions for use by MD code when managing MSI and MSI-X interrupts: - pci_enable_msi(dev, address, data) programs the MSI capability address and data registers for a group of MSI messages - pci_enable_msix(dev, index, address, data) initializes a single MSI-X message in the MSI-X table - pci_mask_msix(dev, index) masks a single MSI-X message - pci_unmask_msix(dev, index) unmasks a single MSI-X message - pci_pending_msix(dev, index) returns true if the specified MSI-X message is currently pending - Save the MSI capability address and data registers in the pci_cfgreg block in a PCI devices ivars and restore the values when a device is resumed. Note that the MSI-X table is not currently restored during resume. - Add constants for MSI-X register offsets and fields. - Record interesting data about any MSI-X capability blocks we come across in the pci_cfgreg block in the ivars for PCI devices. Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X) Reviewed by: scottl, grehan, jfv MFC after: 2 months
177 lines
5.5 KiB
C
177 lines
5.5 KiB
C
/*-
|
|
* Copyright (c) 2000 Michael Smith
|
|
* Copyright (c) 2000 BSDi
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_acpi.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
|
|
#include <contrib/dev/acpica/acpi.h>
|
|
#include <dev/acpica/acpivar.h>
|
|
#include <dev/acpica/acpi_pcibvar.h>
|
|
|
|
#include <machine/pci_cfgreg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcib_private.h>
|
|
#include "pcib_if.h"
|
|
|
|
/* Hooks for the ACPI CA debugging infrastructure. */
|
|
#define _COMPONENT ACPI_BUS
|
|
ACPI_MODULE_NAME("PCI_PCI")
|
|
|
|
struct acpi_pcib_softc {
|
|
struct pcib_softc ap_pcibsc;
|
|
ACPI_HANDLE ap_handle;
|
|
ACPI_BUFFER ap_prt; /* interrupt routing table */
|
|
};
|
|
|
|
struct acpi_pcib_lookup_info {
|
|
UINT32 address;
|
|
ACPI_HANDLE handle;
|
|
};
|
|
|
|
static int acpi_pcib_pci_probe(device_t bus);
|
|
static int acpi_pcib_pci_attach(device_t bus);
|
|
static int acpi_pcib_pci_resume(device_t bus);
|
|
static int acpi_pcib_read_ivar(device_t dev, device_t child,
|
|
int which, uintptr_t *result);
|
|
static int acpi_pcib_pci_route_interrupt(device_t pcib,
|
|
device_t dev, int pin);
|
|
|
|
static device_method_t acpi_pcib_pci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, acpi_pcib_pci_probe),
|
|
DEVMETHOD(device_attach, acpi_pcib_pci_attach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, acpi_pcib_pci_resume),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_read_ivar, acpi_pcib_read_ivar),
|
|
DEVMETHOD(bus_write_ivar, pcib_write_ivar),
|
|
DEVMETHOD(bus_alloc_resource, pcib_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
|
|
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
|
|
|
|
/* pcib interface */
|
|
DEVMETHOD(pcib_maxslots, pcib_maxslots),
|
|
DEVMETHOD(pcib_read_config, pcib_read_config),
|
|
DEVMETHOD(pcib_write_config, pcib_write_config),
|
|
DEVMETHOD(pcib_route_interrupt, acpi_pcib_pci_route_interrupt),
|
|
DEVMETHOD(pcib_alloc_msi, pcib_alloc_msi),
|
|
DEVMETHOD(pcib_release_msi, pcib_release_msi),
|
|
DEVMETHOD(pcib_alloc_msix, pcib_alloc_msix),
|
|
DEVMETHOD(pcib_release_msix, pcib_release_msix),
|
|
|
|
{0, 0}
|
|
};
|
|
|
|
static devclass_t pcib_devclass;
|
|
|
|
DEFINE_CLASS_0(pcib, acpi_pcib_pci_driver, acpi_pcib_pci_methods,
|
|
sizeof(struct acpi_pcib_softc));
|
|
DRIVER_MODULE(acpi_pcib, pci, acpi_pcib_pci_driver, pcib_devclass, 0, 0);
|
|
MODULE_DEPEND(acpi_pcib, acpi, 1, 1, 1);
|
|
|
|
static int
|
|
acpi_pcib_pci_probe(device_t dev)
|
|
{
|
|
|
|
if (pci_get_class(dev) != PCIC_BRIDGE ||
|
|
pci_get_subclass(dev) != PCIS_BRIDGE_PCI ||
|
|
acpi_disabled("pci"))
|
|
return (ENXIO);
|
|
if (acpi_get_handle(dev) == NULL)
|
|
return (ENXIO);
|
|
if (pci_cfgregopen() == 0)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "ACPI PCI-PCI bridge");
|
|
return (-1000);
|
|
}
|
|
|
|
static int
|
|
acpi_pcib_pci_attach(device_t dev)
|
|
{
|
|
struct acpi_pcib_softc *sc;
|
|
|
|
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
|
|
|
|
pcib_attach_common(dev);
|
|
sc = device_get_softc(dev);
|
|
sc->ap_handle = acpi_get_handle(dev);
|
|
return (acpi_pcib_attach(dev, &sc->ap_prt, sc->ap_pcibsc.secbus));
|
|
}
|
|
|
|
static int
|
|
acpi_pcib_pci_resume(device_t dev)
|
|
{
|
|
|
|
return (acpi_pcib_resume(dev));
|
|
}
|
|
|
|
static int
|
|
acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
|
|
{
|
|
struct acpi_pcib_softc *sc = device_get_softc(dev);
|
|
|
|
switch (which) {
|
|
case ACPI_IVAR_HANDLE:
|
|
*result = (uintptr_t)sc->ap_handle;
|
|
return (0);
|
|
}
|
|
return (pcib_read_ivar(dev, child, which, result));
|
|
}
|
|
|
|
static int
|
|
acpi_pcib_pci_route_interrupt(device_t pcib, device_t dev, int pin)
|
|
{
|
|
struct acpi_pcib_softc *sc;
|
|
|
|
sc = device_get_softc(pcib);
|
|
|
|
/*
|
|
* If we don't have a _PRT, fall back to the swizzle method
|
|
* for routing interrupts.
|
|
*/
|
|
if (sc->ap_prt.Pointer == NULL)
|
|
return (pcib_route_interrupt(pcib, dev, pin));
|
|
else
|
|
return (acpi_pcib_route_interrupt(pcib, dev, pin, &sc->ap_prt));
|
|
}
|