d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
86675b5c0d
freebsd-skq/sys/dev/ath/if_ath_beacon.c
Adrian Chadd 92e84e43a6 Implement the replacement EDMA FIFO code. 
(Yes, the previous code temporarily broke EDMA TX. I'm sorry; I should've
actually setup ATH_BUF_FIFOEND on frames so txq->axq_fifo_depth was
cleared!)

This code implements a whole bunch of sorely needed EDMA TX improvements
along with CABQ TX support.

The specifics:

* When filling/refilling the FIFO, use the new TXQ staging queue
  for FIFO frames

* Tag frames with ATH_BUF_FIFOPTR and ATH_BUF_FIFOEND correctly.
  For now the non-CABQ transmit path pushes one frame into the TXQ
  staging queue without setting up the intermediary link pointers
  to chain them together, so draining frames from the txq staging
  queue to the FIFO queue occurs AMPDU / MPDU at a time.

* In the CABQ case, manually tag the list with ATH_BUF_FIFOPTR and
  ATH_BUF_FIFOEND so a chain of frames is pushed into the FIFO
  at once.

* Now that frames are in a FIFO pending queue, we can top up the
  FIFO after completing a single frame.  This means we can keep
  it filled rather than waiting for it drain and _then_ adding
  more frames.

* The EDMA restart routine now walks the FIFO queue in the TXQ
  rather than the pending queue and re-initialises the FIFO with
  that.

* When restarting EDMA, we may have partially completed sending
  a list.  So stamp the first frame that we see in a list with
  ATH_BUF_FIFOPTR and push _that_ into the hardware.

* When completing frames, only check those on the FIFO queue.
  We should never ever queue frames from the pending queue
  direct to the hardware, so there's no point in checking.

* Until I figure out what's going on, make sure if the TXSTATUS
  for an empty queue pops up, complain loudly and continue.
  This will stop the panics that people are seeing.  I'll add
  some code later which will assist in ensuring I'm populating
  each descriptor with the correct queue ID.

* When considering whether to queue frames to the hardware queue
  directly or software queue frames, make sure the depth of
  the FIFO is taken into account now.

* When completing frames, tag them with ATH_BUF_BUSY if they're
  not the final frame in a FIFO list.  The same holding descriptor
  behaviour is required when handling descriptors linked together
  with a link pointer as the hardware will re-read the previous
  descriptor to refresh the link pointer before contiuning.

* .. and if we complete the FIFO list (ie, the buffer has
  ATH_BUF_FIFOEND set), then we don't need the holding buffer
  any longer.  Thus, free it.

Tested:

* AR9380/AR9580, STA and hostap
* AR9280, STA/hostap

TODO:

* I don't yet trust that the EDMA restart routine is totally correct
  in all circumstances.  I'll continue to thrash this out under heavy
  multiple-TXQ traffic load and fix whatever pops up.
2013-03-26 20:04:45 +00:00

1099 lines
30 KiB
C
Raw Blame History

/*-
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the Atheros Wireless LAN controller.
*
* This software is derived from work of Atsushi Onoe; his contribution
* is greatly appreciated.
*/
#include "opt_inet.h"
#include "opt_ath.h"
/*
* This is needed for register operations which are performed
* by the driver - eg, calls to ath_hal_gettsf32().
*
* It's also required for any AH_DEBUG checks in here, eg the
* module dependencies.
*/
#include "opt_ah.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/errno.h>
#include <sys/callout.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/priv.h>
#include <sys/module.h>
#include <sys/ktr.h>
#include <sys/smp.h> /* for mp_ncpus */
#include <machine/bus.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_llc.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_regdomain.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#include <net/bpf.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_ether.h>
#endif
#include <dev/ath/if_athvar.h>
#include <dev/ath/if_ath_debug.h>
#include <dev/ath/if_ath_misc.h>
#include <dev/ath/if_ath_tx.h>
#include <dev/ath/if_ath_beacon.h>
#ifdef ATH_TX99_DIAG
#include <dev/ath/ath_tx99/ath_tx99.h>
#endif
/*
* Setup a h/w transmit queue for beacons.
*/
int
ath_beaconq_setup(struct ath_softc *sc)
{
struct ath_hal *ah = sc->sc_ah;
HAL_TXQ_INFO qi;
memset(&qi, 0, sizeof(qi));
qi.tqi_aifs = HAL_TXQ_USEDEFAULT;
qi.tqi_cwmin = HAL_TXQ_USEDEFAULT;
qi.tqi_cwmax = HAL_TXQ_USEDEFAULT;
/* NB: for dynamic turbo, don't enable any other interrupts */
qi.tqi_qflags = HAL_TXQ_TXDESCINT_ENABLE;
if (sc->sc_isedma)
qi.tqi_qflags |= HAL_TXQ_TXOKINT_ENABLE |
HAL_TXQ_TXERRINT_ENABLE;
return ath_hal_setuptxqueue(ah, HAL_TX_QUEUE_BEACON, &qi);
}
/*
* Setup the transmit queue parameters for the beacon queue.
*/
int
ath_beaconq_config(struct ath_softc *sc)
{
#define ATH_EXPONENT_TO_VALUE(v) ((1<<(v))-1)
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ath_hal *ah = sc->sc_ah;
HAL_TXQ_INFO qi;
ath_hal_gettxqueueprops(ah, sc->sc_bhalq, &qi);
if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
ic->ic_opmode == IEEE80211_M_MBSS) {
/*
* Always burst out beacon and CAB traffic.
*/
qi.tqi_aifs = ATH_BEACON_AIFS_DEFAULT;
qi.tqi_cwmin = ATH_BEACON_CWMIN_DEFAULT;
qi.tqi_cwmax = ATH_BEACON_CWMAX_DEFAULT;
} else {
struct wmeParams *wmep =
&ic->ic_wme.wme_chanParams.cap_wmeParams[WME_AC_BE];
/*
* Adhoc mode; important thing is to use 2x cwmin.
*/
qi.tqi_aifs = wmep->wmep_aifsn;
qi.tqi_cwmin = 2*ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin);
qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax);
}
if (!ath_hal_settxqueueprops(ah, sc->sc_bhalq, &qi)) {
device_printf(sc->sc_dev, "unable to update parameters for "
"beacon hardware queue!\n");
return 0;
} else {
ath_hal_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */
return 1;
}
#undef ATH_EXPONENT_TO_VALUE
}
/*
* Allocate and setup an initial beacon frame.
*/
int
ath_beacon_alloc(struct ath_softc *sc, struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ath_vap *avp = ATH_VAP(vap);
struct ath_buf *bf;
struct mbuf *m;
int error;
bf = avp->av_bcbuf;
DPRINTF(sc, ATH_DEBUG_NODE, "%s: bf_m=%p, bf_node=%p\n",
__func__, bf->bf_m, bf->bf_node);
if (bf->bf_m != NULL) {
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
m_freem(bf->bf_m);
bf->bf_m = NULL;
}
if (bf->bf_node != NULL) {
ieee80211_free_node(bf->bf_node);
bf->bf_node = NULL;
}
/*
* NB: the beacon data buffer must be 32-bit aligned;
* we assume the mbuf routines will return us something
* with this alignment (perhaps should assert).
*/
m = ieee80211_beacon_alloc(ni, &avp->av_boff);
if (m == NULL) {
device_printf(sc->sc_dev, "%s: cannot get mbuf\n", __func__);
sc->sc_stats.ast_be_nombuf++;
return ENOMEM;
}
error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m,
bf->bf_segs, &bf->bf_nseg,
BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev,
"%s: cannot map mbuf, bus_dmamap_load_mbuf_sg returns %d\n",
__func__, error);
m_freem(m);
return error;
}
/*
* Calculate a TSF adjustment factor required for staggered
* beacons. Note that we assume the format of the beacon
* frame leaves the tstamp field immediately following the
* header.
*/
if (sc->sc_stagbeacons && avp->av_bslot > 0) {
uint64_t tsfadjust;
struct ieee80211_frame *wh;
/*
* The beacon interval is in TU's; the TSF is in usecs.
* We figure out how many TU's to add to align the timestamp
* then convert to TSF units and handle byte swapping before
* inserting it in the frame. The hardware will then add this
* each time a beacon frame is sent. Note that we align vap's
* 1..N and leave vap 0 untouched. This means vap 0 has a
* timestamp in one beacon interval while the others get a
* timstamp aligned to the next interval.
*/
tsfadjust = ni->ni_intval *
(ATH_BCBUF - avp->av_bslot) / ATH_BCBUF;
tsfadjust = htole64(tsfadjust << 10); /* TU -> TSF */
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: %s beacons bslot %d intval %u tsfadjust %llu\n",
__func__, sc->sc_stagbeacons ? "stagger" : "burst",
avp->av_bslot, ni->ni_intval,
(long long unsigned) le64toh(tsfadjust));
wh = mtod(m, struct ieee80211_frame *);
memcpy(&wh[1], &tsfadjust, sizeof(tsfadjust));
}
bf->bf_m = m;
bf->bf_node = ieee80211_ref_node(ni);
return 0;
}
/*
* Setup the beacon frame for transmit.
*/
static void
ath_beacon_setup(struct ath_softc *sc, struct ath_buf *bf)
{
#define USE_SHPREAMBLE(_ic) \
(((_ic)->ic_flags & (IEEE80211_F_SHPREAMBLE | IEEE80211_F_USEBARKER))\
== IEEE80211_F_SHPREAMBLE)
struct ieee80211_node *ni = bf->bf_node;
struct ieee80211com *ic = ni->ni_ic;
struct mbuf *m = bf->bf_m;
struct ath_hal *ah = sc->sc_ah;
struct ath_desc *ds;
int flags, antenna;
const HAL_RATE_TABLE *rt;
u_int8_t rix, rate;
HAL_DMA_ADDR bufAddrList[4];
uint32_t segLenList[4];
HAL_11N_RATE_SERIES rc[4];
DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: m %p len %u\n",
__func__, m, m->m_len);
/* setup descriptors */
ds = bf->bf_desc;
bf->bf_last = bf;
bf->bf_lastds = ds;
flags = HAL_TXDESC_NOACK;
if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol) {
/* self-linked descriptor */
ath_hal_settxdesclink(sc->sc_ah, ds, bf->bf_daddr);
flags |= HAL_TXDESC_VEOL;
/*
* Let hardware handle antenna switching.
*/
antenna = sc->sc_txantenna;
} else {
ath_hal_settxdesclink(sc->sc_ah, ds, 0);
/*
* Switch antenna every 4 beacons.
* XXX assumes two antenna
*/
if (sc->sc_txantenna != 0)
antenna = sc->sc_txantenna;
else if (sc->sc_stagbeacons && sc->sc_nbcnvaps != 0)
antenna = ((sc->sc_stats.ast_be_xmit / sc->sc_nbcnvaps) & 4 ? 2 : 1);
else
antenna = (sc->sc_stats.ast_be_xmit & 4 ? 2 : 1);
}
KASSERT(bf->bf_nseg == 1,
("multi-segment beacon frame; nseg %u", bf->bf_nseg));
/*
* Calculate rate code.
* XXX everything at min xmit rate
*/
rix = 0;
rt = sc->sc_currates;
rate = rt->info[rix].rateCode;
if (USE_SHPREAMBLE(ic))
rate |= rt->info[rix].shortPreamble;
ath_hal_setuptxdesc(ah, ds
, m->m_len + IEEE80211_CRC_LEN /* frame length */
, sizeof(struct ieee80211_frame)/* header length */
, HAL_PKT_TYPE_BEACON /* Atheros packet type */
, ni->ni_txpower /* txpower XXX */
, rate, 1 /* series 0 rate/tries */
, HAL_TXKEYIX_INVALID /* no encryption */
, antenna /* antenna mode */
, flags /* no ack, veol for beacons */
, 0 /* rts/cts rate */
, 0 /* rts/cts duration */
);
/*
* The EDMA HAL currently assumes that _all_ rate control
* settings are done in ath_hal_set11nratescenario(), rather
* than in ath_hal_setuptxdesc().
*/
if (sc->sc_isedma) {
memset(&rc, 0, sizeof(rc));
rc[0].ChSel = sc->sc_txchainmask;
rc[0].Tries = 1;
rc[0].Rate = rt->info[rix].rateCode;
rc[0].RateIndex = rix;
rc[0].tx_power_cap = 0x3f;
rc[0].PktDuration =
ath_hal_computetxtime(ah, rt, roundup(m->m_len, 4),
rix, 0);
ath_hal_set11nratescenario(ah, ds, 0, 0, rc, 4, flags);
}
/* NB: beacon's BufLen must be a multiple of 4 bytes */
segLenList[0] = roundup(m->m_len, 4);
segLenList[1] = segLenList[2] = segLenList[3] = 0;
bufAddrList[0] = bf->bf_segs[0].ds_addr;
bufAddrList[1] = bufAddrList[2] = bufAddrList[3] = 0;
ath_hal_filltxdesc(ah, ds
, bufAddrList
, segLenList
, 0 /* XXX desc id */
, sc->sc_bhalq /* hardware TXQ */
, AH_TRUE /* first segment */
, AH_TRUE /* last segment */
, ds /* first descriptor */
);
#if 0
ath_desc_swap(ds);
#endif
#undef USE_SHPREAMBLE
}
void
ath_beacon_update(struct ieee80211vap *vap, int item)
{
struct ieee80211_beacon_offsets *bo = &ATH_VAP(vap)->av_boff;
setbit(bo->bo_flags, item);
}
/*
* Handle a beacon miss.
*/
static void
ath_beacon_miss(struct ath_softc *sc)
{
HAL_SURVEY_SAMPLE hs;
HAL_BOOL ret;
uint32_t hangs;
bzero(&hs, sizeof(hs));
ret = ath_hal_get_mib_cycle_counts(sc->sc_ah, &hs);
if (ath_hal_gethangstate(sc->sc_ah, 0xffff, &hangs) && hangs != 0) {
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: hang=0x%08x\n",
__func__,
hangs);
}
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: valid=%d, txbusy=%u, rxbusy=%u, chanbusy=%u, "
"extchanbusy=%u, cyclecount=%u\n",
__func__,
ret,
hs.tx_busy,
hs.rx_busy,
hs.chan_busy,
hs.ext_chan_busy,
hs.cycle_count);
}
/*
* Transmit a beacon frame at SWBA. Dynamic updates to the
* frame contents are done as needed and the slot time is
* also adjusted based on current state.
*/
void
ath_beacon_proc(void *arg, int pending)
{
struct ath_softc *sc = arg;
struct ath_hal *ah = sc->sc_ah;
struct ieee80211vap *vap;
struct ath_buf *bf;
int slot, otherant;
uint32_t bfaddr;
DPRINTF(sc, ATH_DEBUG_BEACON_PROC, "%s: pending %u\n",
__func__, pending);
/*
* Check if the previous beacon has gone out. If
* not don't try to post another, skip this period
* and wait for the next. Missed beacons indicate
* a problem and should not occur. If we miss too
* many consecutive beacons reset the device.
*/
if (ath_hal_numtxpending(ah, sc->sc_bhalq) != 0) {
sc->sc_bmisscount++;
sc->sc_stats.ast_be_missed++;
ath_beacon_miss(sc);
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: missed %u consecutive beacons\n",
__func__, sc->sc_bmisscount);
if (sc->sc_bmisscount >= ath_bstuck_threshold)
taskqueue_enqueue(sc->sc_tq, &sc->sc_bstucktask);
return;
}
if (sc->sc_bmisscount != 0) {
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: resume beacon xmit after %u misses\n",
__func__, sc->sc_bmisscount);
sc->sc_bmisscount = 0;
}
if (sc->sc_stagbeacons) { /* staggered beacons */
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
uint32_t tsftu;
tsftu = ath_hal_gettsf32(ah) >> 10;
/* XXX lintval */
slot = ((tsftu % ic->ic_lintval) * ATH_BCBUF) / ic->ic_lintval;
vap = sc->sc_bslot[(slot+1) % ATH_BCBUF];
bfaddr = 0;
if (vap != NULL && vap->iv_state >= IEEE80211_S_RUN) {
bf = ath_beacon_generate(sc, vap);
if (bf != NULL)
bfaddr = bf->bf_daddr;
}
} else { /* burst'd beacons */
uint32_t *bflink = &bfaddr;
for (slot = 0; slot < ATH_BCBUF; slot++) {
vap = sc->sc_bslot[slot];
if (vap != NULL && vap->iv_state >= IEEE80211_S_RUN) {
bf = ath_beacon_generate(sc, vap);
/*
* XXX TODO: this should use settxdesclinkptr()
* otherwise it won't work for EDMA chipsets!
*/
if (bf != NULL) {
/* XXX should do this using the ds */
*bflink = bf->bf_daddr;
ath_hal_gettxdesclinkptr(sc->sc_ah,
bf->bf_desc, &bflink);
}
}
}
/*
* XXX TODO: this should use settxdesclinkptr()
* otherwise it won't work for EDMA chipsets!
*/
*bflink = 0; /* terminate list */
}
/*
* Handle slot time change when a non-ERP station joins/leaves
* an 11g network. The 802.11 layer notifies us via callback,
* we mark updateslot, then wait one beacon before effecting
* the change. This gives associated stations at least one
* beacon interval to note the state change.
*/
/* XXX locking */
if (sc->sc_updateslot == UPDATE) {
sc->sc_updateslot = COMMIT; /* commit next beacon */
sc->sc_slotupdate = slot;
} else if (sc->sc_updateslot == COMMIT && sc->sc_slotupdate == slot)
ath_setslottime(sc); /* commit change to h/w */
/*
* Check recent per-antenna transmit statistics and flip
* the default antenna if noticeably more frames went out
* on the non-default antenna.
* XXX assumes 2 anntenae
*/
if (!sc->sc_diversity && (!sc->sc_stagbeacons || slot == 0)) {
otherant = sc->sc_defant & 1 ? 2 : 1;
if (sc->sc_ant_tx[otherant] > sc->sc_ant_tx[sc->sc_defant] + 2)
ath_setdefantenna(sc, otherant);
sc->sc_ant_tx[1] = sc->sc_ant_tx[2] = 0;
}
/* Program the CABQ with the contents of the CABQ txq and start it */
ATH_TXQ_LOCK(sc->sc_cabq);
ath_beacon_cabq_start(sc);
ATH_TXQ_UNLOCK(sc->sc_cabq);
/* Program the new beacon frame if we have one for this interval */
if (bfaddr != 0) {
/*
* Stop any current dma and put the new frame on the queue.
* This should never fail since we check above that no frames
* are still pending on the queue.
*/
if (! sc->sc_isedma) {
if (!ath_hal_stoptxdma(ah, sc->sc_bhalq)) {
DPRINTF(sc, ATH_DEBUG_ANY,
"%s: beacon queue %u did not stop?\n",
__func__, sc->sc_bhalq);
}
}
/* NB: cabq traffic should already be queued and primed */
ath_hal_puttxbuf(ah, sc->sc_bhalq, bfaddr);
ath_hal_txstart(ah, sc->sc_bhalq);
sc->sc_stats.ast_be_xmit++;
}
}
static void
ath_beacon_cabq_start_edma(struct ath_softc *sc)
{
struct ath_buf *bf, *bf_last;
struct ath_txq *cabq = sc->sc_cabq;
#if 0
struct ath_buf *bfi;
int i = 0;
#endif
ATH_TXQ_LOCK_ASSERT(cabq);
if (TAILQ_EMPTY(&cabq->axq_q))
return;
bf = TAILQ_FIRST(&cabq->axq_q);
bf_last = TAILQ_LAST(&cabq->axq_q, axq_q_s);
/*
* This is a dirty, dirty hack to push the contents of
* the cabq staging queue into the FIFO.
*
* This ideally should live in the EDMA code file
* and only push things into the CABQ if there's a FIFO
* slot.
*
* We can't treat this like a normal TX queue because
* in the case of multi-VAP traffic, we may have to flush
* the CABQ each new (staggered) beacon that goes out.
* But for non-staggered beacons, we could in theory
* handle multicast traffic for all VAPs in one FIFO
* push. Just keep all of this in mind if you're wondering
* how to correctly/better handle multi-VAP CABQ traffic
* with EDMA.
*/
/*
* Is the CABQ FIFO free? If not, complain loudly and
* don't queue anything. Maybe we'll flush the CABQ
* traffic, maybe we won't. But that'll happen next
* beacon interval.
*/
if (cabq->axq_fifo_depth >= HAL_TXFIFO_DEPTH) {
device_printf(sc->sc_dev,
"%s: Q%d: CAB FIFO queue=%d?\n",
__func__,
cabq->axq_qnum,
cabq->axq_fifo_depth);
return;
}
/*
* Ok, so here's the gymnastics reqiured to make this
* all sensible.
*/
/*
* Tag the first/last buffer appropriately.
*/
bf->bf_flags |= ATH_BUF_FIFOPTR;
bf_last->bf_flags |= ATH_BUF_FIFOEND;
#if 0
i = 0;
TAILQ_FOREACH(bfi, &cabq->axq_q, bf_list) {
ath_printtxbuf(sc, bf, cabq->axq_qnum, i, 0);
i++;
}
#endif
/*
* We now need to push this set of frames onto the tail
* of the FIFO queue. We don't adjust the aggregate
* count, only the queue depth counter(s).
* We also need to blank the link pointer now.
*/
TAILQ_CONCAT(&cabq->fifo.axq_q, &cabq->axq_q, bf_list);
cabq->axq_link = NULL;
cabq->fifo.axq_depth += cabq->axq_depth;
cabq->axq_depth = 0;
/* Bump FIFO queue */
cabq->axq_fifo_depth++;
/* Push the first entry into the hardware */
ath_hal_puttxbuf(sc->sc_ah, cabq->axq_qnum, bf->bf_daddr);
/* NB: gated by beacon so safe to start here */
ath_hal_txstart(sc->sc_ah, cabq->axq_qnum);
}
static void
ath_beacon_cabq_start_legacy(struct ath_softc *sc)
{
struct ath_buf *bf;
struct ath_txq *cabq = sc->sc_cabq;
ATH_TXQ_LOCK_ASSERT(cabq);
if (TAILQ_EMPTY(&cabq->axq_q))
return;
bf = TAILQ_FIRST(&cabq->axq_q);
/* Push the first entry into the hardware */
ath_hal_puttxbuf(sc->sc_ah, cabq->axq_qnum, bf->bf_daddr);
/* NB: gated by beacon so safe to start here */
ath_hal_txstart(sc->sc_ah, cabq->axq_qnum);
}
/*
* Start CABQ transmission - this assumes that all frames are prepped
* and ready in the CABQ.
*/
void
ath_beacon_cabq_start(struct ath_softc *sc)
{
struct ath_txq *cabq = sc->sc_cabq;
ATH_TXQ_LOCK_ASSERT(cabq);
if (TAILQ_EMPTY(&cabq->axq_q))
return;
if (sc->sc_isedma)
ath_beacon_cabq_start_edma(sc);
else
ath_beacon_cabq_start_legacy(sc);
}
struct ath_buf *
ath_beacon_generate(struct ath_softc *sc, struct ieee80211vap *vap)
{
struct ath_vap *avp = ATH_VAP(vap);
struct ath_txq *cabq = sc->sc_cabq;
struct ath_buf *bf;
struct mbuf *m;
int nmcastq, error;
KASSERT(vap->iv_state >= IEEE80211_S_RUN,
("not running, state %d", vap->iv_state));
KASSERT(avp->av_bcbuf != NULL, ("no beacon buffer"));
/*
* Update dynamic beacon contents. If this returns
* non-zero then we need to remap the memory because
* the beacon frame changed size (probably because
* of the TIM bitmap).
*/
bf = avp->av_bcbuf;
m = bf->bf_m;
/* XXX lock mcastq? */
nmcastq = avp->av_mcastq.axq_depth;
if (ieee80211_beacon_update(bf->bf_node, &avp->av_boff, m, nmcastq)) {
/* XXX too conservative? */
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m,
bf->bf_segs, &bf->bf_nseg,
BUS_DMA_NOWAIT);
if (error != 0) {
if_printf(vap->iv_ifp,
"%s: bus_dmamap_load_mbuf_sg failed, error %u\n",
__func__, error);
return NULL;
}
}
if ((avp->av_boff.bo_tim[4] & 1) && cabq->axq_depth) {
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: cabq did not drain, mcastq %u cabq %u\n",
__func__, nmcastq, cabq->axq_depth);
sc->sc_stats.ast_cabq_busy++;
if (sc->sc_nvaps > 1 && sc->sc_stagbeacons) {
/*
* CABQ traffic from a previous vap is still pending.
* We must drain the q before this beacon frame goes
* out as otherwise this vap's stations will get cab
* frames from a different vap.
* XXX could be slow causing us to miss DBA
*/
ath_tx_draintxq(sc, cabq);
}
}
ath_beacon_setup(sc, bf);
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE);
/*
* Enable the CAB queue before the beacon queue to
* insure cab frames are triggered by this beacon.
*/
if (avp->av_boff.bo_tim[4] & 1) {
/* NB: only at DTIM */
ATH_TXQ_LOCK(&avp->av_mcastq);
if (nmcastq) {
struct ath_buf *bfm, *bfc_last;
/*
* Move frames from the s/w mcast q to the h/w cab q.
*
* XXX TODO: if we chain together multiple VAPs
* worth of CABQ traffic, should we keep the
* MORE data bit set on the last frame of each
* intermediary VAP (ie, only clear the MORE
* bit of the last frame on the last vap?)
*/
bfm = TAILQ_FIRST(&avp->av_mcastq.axq_q);
ATH_TXQ_LOCK(cabq);
/*
* If there's already a frame on the CABQ, we
* need to link to the end of the last frame.
* We can't use axq_link here because
* EDMA descriptors require some recalculation
* (checksum) to occur.
*/
bfc_last = ATH_TXQ_LAST(cabq, axq_q_s);
if (bfc_last != NULL) {
ath_hal_settxdesclink(sc->sc_ah,
bfc_last->bf_lastds,
bfm->bf_daddr);
}
ath_txqmove(cabq, &avp->av_mcastq);
ATH_TXQ_UNLOCK(cabq);
/*
* XXX not entirely accurate, in case a mcast
* queue frame arrived before we grabbed the TX
* lock.
*/
sc->sc_stats.ast_cabq_xmit += nmcastq;
}
ATH_TXQ_UNLOCK(&avp->av_mcastq);
}
return bf;
}
void
ath_beacon_start_adhoc(struct ath_softc *sc, struct ieee80211vap *vap)
{
struct ath_vap *avp = ATH_VAP(vap);
struct ath_hal *ah = sc->sc_ah;
struct ath_buf *bf;
struct mbuf *m;
int error;
KASSERT(avp->av_bcbuf != NULL, ("no beacon buffer"));
/*
* Update dynamic beacon contents. If this returns
* non-zero then we need to remap the memory because
* the beacon frame changed size (probably because
* of the TIM bitmap).
*/
bf = avp->av_bcbuf;
m = bf->bf_m;
if (ieee80211_beacon_update(bf->bf_node, &avp->av_boff, m, 0)) {
/* XXX too conservative? */
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m,
bf->bf_segs, &bf->bf_nseg,
BUS_DMA_NOWAIT);
if (error != 0) {
if_printf(vap->iv_ifp,
"%s: bus_dmamap_load_mbuf_sg failed, error %u\n",
__func__, error);
return;
}
}
ath_beacon_setup(sc, bf);
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE);
/* NB: caller is known to have already stopped tx dma */
ath_hal_puttxbuf(ah, sc->sc_bhalq, bf->bf_daddr);
ath_hal_txstart(ah, sc->sc_bhalq);
}
/*
* Reclaim beacon resources and return buffer to the pool.
*/
void
ath_beacon_return(struct ath_softc *sc, struct ath_buf *bf)
{
DPRINTF(sc, ATH_DEBUG_NODE, "%s: free bf=%p, bf_m=%p, bf_node=%p\n",
__func__, bf, bf->bf_m, bf->bf_node);
if (bf->bf_m != NULL) {
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
m_freem(bf->bf_m);
bf->bf_m = NULL;
}
if (bf->bf_node != NULL) {
ieee80211_free_node(bf->bf_node);
bf->bf_node = NULL;
}
TAILQ_INSERT_TAIL(&sc->sc_bbuf, bf, bf_list);
}
/*
* Reclaim beacon resources.
*/
void
ath_beacon_free(struct ath_softc *sc)
{
struct ath_buf *bf;
TAILQ_FOREACH(bf, &sc->sc_bbuf, bf_list) {
DPRINTF(sc, ATH_DEBUG_NODE,
"%s: free bf=%p, bf_m=%p, bf_node=%p\n",
__func__, bf, bf->bf_m, bf->bf_node);
if (bf->bf_m != NULL) {
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
m_freem(bf->bf_m);
bf->bf_m = NULL;
}
if (bf->bf_node != NULL) {
ieee80211_free_node(bf->bf_node);
bf->bf_node = NULL;
}
}
}
/*
* Configure the beacon and sleep timers.
*
* When operating as an AP this resets the TSF and sets
* up the hardware to notify us when we need to issue beacons.
*
* When operating in station mode this sets up the beacon
* timers according to the timestamp of the last received
* beacon and the current TSF, configures PCF and DTIM
* handling, programs the sleep registers so the hardware
* will wakeup in time to receive beacons, and configures
* the beacon miss handling so we'll receive a BMISS
* interrupt when we stop seeing beacons from the AP
* we've associated with.
*/
void
ath_beacon_config(struct ath_softc *sc, struct ieee80211vap *vap)
{
#define TSF_TO_TU(_h,_l) \
((((u_int32_t)(_h)) << 22) | (((u_int32_t)(_l)) >> 10))
#define FUDGE 2
struct ath_hal *ah = sc->sc_ah;
struct ieee80211com *ic = sc->sc_ifp->if_l2com;
struct ieee80211_node *ni;
u_int32_t nexttbtt, intval, tsftu;
u_int32_t nexttbtt_u8, intval_u8;
u_int64_t tsf;
if (vap == NULL)
vap = TAILQ_FIRST(&ic->ic_vaps); /* XXX */
/*
* Just ensure that we aren't being called when the last
* VAP is destroyed.
*/
if (vap == NULL) {
device_printf(sc->sc_dev, "%s: called with no VAPs\n",
__func__);
return;
}
ni = ieee80211_ref_node(vap->iv_bss);
/* extract tstamp from last beacon and convert to TU */
nexttbtt = TSF_TO_TU(LE_READ_4(ni->ni_tstamp.data + 4),
LE_READ_4(ni->ni_tstamp.data));
if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
ic->ic_opmode == IEEE80211_M_MBSS) {
/*
* For multi-bss ap/mesh support beacons are either staggered
* evenly over N slots or burst together. For the former
* arrange for the SWBA to be delivered for each slot.
* Slots that are not occupied will generate nothing.
*/
/* NB: the beacon interval is kept internally in TU's */
intval = ni->ni_intval & HAL_BEACON_PERIOD;
if (sc->sc_stagbeacons)
intval /= ATH_BCBUF;
} else {
/* NB: the beacon interval is kept internally in TU's */
intval = ni->ni_intval & HAL_BEACON_PERIOD;
}
if (nexttbtt == 0) /* e.g. for ap mode */
nexttbtt = intval;
else if (intval) /* NB: can be 0 for monitor mode */
nexttbtt = roundup(nexttbtt, intval);
DPRINTF(sc, ATH_DEBUG_BEACON, "%s: nexttbtt %u intval %u (%u)\n",
__func__, nexttbtt, intval, ni->ni_intval);
if (ic->ic_opmode == IEEE80211_M_STA && !sc->sc_swbmiss) {
HAL_BEACON_STATE bs;
int dtimperiod, dtimcount;
int cfpperiod, cfpcount;
/*
* Setup dtim and cfp parameters according to
* last beacon we received (which may be none).
*/
dtimperiod = ni->ni_dtim_period;
if (dtimperiod <= 0) /* NB: 0 if not known */
dtimperiod = 1;
dtimcount = ni->ni_dtim_count;
if (dtimcount >= dtimperiod) /* NB: sanity check */
dtimcount = 0; /* XXX? */
cfpperiod = 1; /* NB: no PCF support yet */
cfpcount = 0;
/*
* Pull nexttbtt forward to reflect the current
* TSF and calculate dtim+cfp state for the result.
*/
tsf = ath_hal_gettsf64(ah);
tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
do {
nexttbtt += intval;
if (--dtimcount < 0) {
dtimcount = dtimperiod - 1;
if (--cfpcount < 0)
cfpcount = cfpperiod - 1;
}
} while (nexttbtt < tsftu);
memset(&bs, 0, sizeof(bs));
bs.bs_intval = intval;
bs.bs_nexttbtt = nexttbtt;
bs.bs_dtimperiod = dtimperiod*intval;
bs.bs_nextdtim = bs.bs_nexttbtt + dtimcount*intval;
bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
bs.bs_cfpmaxduration = 0;
#if 0
/*
* The 802.11 layer records the offset to the DTIM
* bitmap while receiving beacons; use it here to
* enable h/w detection of our AID being marked in
* the bitmap vector (to indicate frames for us are
* pending at the AP).
* XXX do DTIM handling in s/w to WAR old h/w bugs
* XXX enable based on h/w rev for newer chips
*/
bs.bs_timoffset = ni->ni_timoff;
#endif
/*
* Calculate the number of consecutive beacons to miss
* before taking a BMISS interrupt.
* Note that we clamp the result to at most 10 beacons.
*/
bs.bs_bmissthreshold = vap->iv_bmissthreshold;
if (bs.bs_bmissthreshold > 10)
bs.bs_bmissthreshold = 10;
else if (bs.bs_bmissthreshold <= 0)
bs.bs_bmissthreshold = 1;
/*
* Calculate sleep duration. The configuration is
* given in ms. We insure a multiple of the beacon
* period is used. Also, if the sleep duration is
* greater than the DTIM period then it makes senses
* to make it a multiple of that.
*
* XXX fixed at 100ms
*/
bs.bs_sleepduration =
roundup(IEEE80211_MS_TO_TU(100), bs.bs_intval);
if (bs.bs_sleepduration > bs.bs_dtimperiod)
bs.bs_sleepduration = roundup(bs.bs_sleepduration, bs.bs_dtimperiod);
DPRINTF(sc, ATH_DEBUG_BEACON,
"%s: tsf %ju tsf:tu %u intval %u nexttbtt %u dtim %u nextdtim %u bmiss %u sleep %u cfp:period %u maxdur %u next %u timoffset %u\n"
, __func__
, tsf, tsftu
, bs.bs_intval
, bs.bs_nexttbtt
, bs.bs_dtimperiod
, bs.bs_nextdtim
, bs.bs_bmissthreshold
, bs.bs_sleepduration
, bs.bs_cfpperiod
, bs.bs_cfpmaxduration
, bs.bs_cfpnext
, bs.bs_timoffset
);
ath_hal_intrset(ah, 0);
ath_hal_beacontimers(ah, &bs);
sc->sc_imask |= HAL_INT_BMISS;
ath_hal_intrset(ah, sc->sc_imask);
} else {
ath_hal_intrset(ah, 0);
if (nexttbtt == intval)
intval |= HAL_BEACON_RESET_TSF;
if (ic->ic_opmode == IEEE80211_M_IBSS) {
/*
* In IBSS mode enable the beacon timers but only
* enable SWBA interrupts if we need to manually
* prepare beacon frames. Otherwise we use a
* self-linked tx descriptor and let the hardware
* deal with things.
*/
intval |= HAL_BEACON_ENA;
if (!sc->sc_hasveol)
sc->sc_imask |= HAL_INT_SWBA;
if ((intval & HAL_BEACON_RESET_TSF) == 0) {
/*
* Pull nexttbtt forward to reflect
* the current TSF.
*/
tsf = ath_hal_gettsf64(ah);
tsftu = TSF_TO_TU(tsf>>32, tsf) + FUDGE;
do {
nexttbtt += intval;
} while (nexttbtt < tsftu);
}
ath_beaconq_config(sc);
} else if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
ic->ic_opmode == IEEE80211_M_MBSS) {
/*
* In AP/mesh mode we enable the beacon timers
* and SWBA interrupts to prepare beacon frames.
*/
intval |= HAL_BEACON_ENA;
sc->sc_imask |= HAL_INT_SWBA; /* beacon prepare */
ath_beaconq_config(sc);
}
/*
* Now dirty things because for now, the EDMA HAL has
* nexttbtt and intval is TU/8.
*/
if (sc->sc_isedma) {
nexttbtt_u8 = (nexttbtt << 3);
intval_u8 = (intval << 3);
if (intval & HAL_BEACON_ENA)
intval_u8 |= HAL_BEACON_ENA;
if (intval & HAL_BEACON_RESET_TSF)
intval_u8 |= HAL_BEACON_RESET_TSF;
ath_hal_beaconinit(ah, nexttbtt_u8, intval_u8);
} else
ath_hal_beaconinit(ah, nexttbtt, intval);
sc->sc_bmisscount = 0;
ath_hal_intrset(ah, sc->sc_imask);
/*
* When using a self-linked beacon descriptor in
* ibss mode load it once here.
*/
if (ic->ic_opmode == IEEE80211_M_IBSS && sc->sc_hasveol)
ath_beacon_start_adhoc(sc, vap);
}
sc->sc_syncbeacon = 0;
ieee80211_free_node(ni);
#undef FUDGE
#undef TSF_TO_TU
}
Reference in New Issue View Git Blame Copy Permalink