4410530efb
Actually this porting supports Pegasus II chip so I guess some other devices supported by NetBSD also work. But the devices list are not included because I cannot confirm if they work. Obtained from: NetBSD MFC after: 3 weeks
272 lines
7.7 KiB
C
272 lines
7.7 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Register definitions for ADMtek Pegasus AN986 USB to Ethernet
|
|
* chip. The Pegasus uses a total of four USB endpoints: the control
|
|
* endpoint (0), a bulk read endpoint for receiving packets (1),
|
|
* a bulk write endpoint for sending packets (2) and an interrupt
|
|
* endpoint for passing RX and TX status (3). Endpoint 0 is used
|
|
* to read and write the ethernet module's registers. All registers
|
|
* are 8 bits wide.
|
|
*
|
|
* Packet transfer is done in 64 byte chunks. The last chunk in a
|
|
* transfer is denoted by having a length less that 64 bytes. For
|
|
* the RX case, the data includes an optional RX status word.
|
|
*/
|
|
|
|
#define AUE_VENDORID_ADMTEK 0x07A6
|
|
#define AUE_DEVICEID_PEGASUS 0x0986
|
|
|
|
#define AUE_VENDORID_BILLIONTON 0x08DD
|
|
#define AUE_DEVICEID_USB100 0x0986
|
|
|
|
#define AUE_VENDORID_MELCO 0x0411
|
|
#define AUE_DEVICEID_LUATX 0x0001
|
|
|
|
|
|
#define AUE_UR_READREG 0xF0
|
|
#define AUE_UR_WRITEREG 0xF1
|
|
|
|
#define AUE_CONFIG_NO 1
|
|
|
|
/*
|
|
* Note that while the ADMtek technically has four
|
|
* endpoints, the control endpoint (endpoint 0) is
|
|
* regarded as special by the USB code and drivers
|
|
* don't have direct access to it. (We access it
|
|
* using usbd_do_request() when reading/writing
|
|
* registers.) Consequently, our endpoint indexes
|
|
* don't match those in the ADMtek Pegasus manual:
|
|
* we consider the RX data endpoint to be index 0
|
|
* and work up from there.
|
|
*/
|
|
#define AUE_ENDPT_RX 0x0
|
|
#define AUE_ENDPT_TX 0x1
|
|
#define AUE_ENDPT_INTR 0x2
|
|
#define AUE_ENDPT_MAX 0x3
|
|
|
|
#define AUE_INTR_PKTLEN 0x8
|
|
|
|
#define AUE_CTL0 0x00
|
|
#define AUE_CTL1 0x01
|
|
#define AUE_CTL2 0x02
|
|
#define AUE_MAR0 0x08
|
|
#define AUE_MAR1 0x09
|
|
#define AUE_MAR2 0x0A
|
|
#define AUE_MAR3 0x0B
|
|
#define AUE_MAR4 0x0C
|
|
#define AUE_MAR5 0x0D
|
|
#define AUE_MAR6 0x0E
|
|
#define AUE_MAR7 0x0F
|
|
#define AUE_MAR AUE_MAR0
|
|
#define AUE_PAR0 0x10
|
|
#define AUE_PAR1 0x11
|
|
#define AUE_PAR2 0x12
|
|
#define AUE_PAR3 0x13
|
|
#define AUE_PAR4 0x14
|
|
#define AUE_PAR5 0x15
|
|
#define AUE_PAR AUE_PAR0
|
|
#define AUE_PAUSE0 0x18
|
|
#define AUE_PAUSE1 0x19
|
|
#define AUE_PAUSE AUE_PAUSE0
|
|
#define AUE_RX_FLOWCTL_CNT 0x1A
|
|
#define AUE_RX_FLOWCTL_FIFO 0x1B
|
|
#define AUE_REG_1D 0x1D
|
|
#define AUE_EE_REG 0x20
|
|
#define AUE_EE_DATA0 0x21
|
|
#define AUE_EE_DATA1 0x22
|
|
#define AUE_EE_DATA AUE_EE_DATA0
|
|
#define AUE_EE_CTL 0x23
|
|
#define AUE_PHY_ADDR 0x25
|
|
#define AUE_PHY_DATA0 0x26
|
|
#define AUE_PHY_DATA1 0x27
|
|
#define AUE_PHY_DATA AUE_PHY_DATA0
|
|
#define AUE_PHY_CTL 0x28
|
|
#define AUE_USB_STS 0x2A
|
|
#define AUE_TXSTAT0 0x2B
|
|
#define AUE_TXSTAT1 0x2C
|
|
#define AUE_TXSTAT AUE_TXSTAT0
|
|
#define AUE_RXSTAT 0x2D
|
|
#define AUE_PKTLOST0 0x2E
|
|
#define AUE_PKTLOST1 0x2F
|
|
#define AUE_PKTLOST AUE_PKTLOST0
|
|
|
|
#define AUE_REG_7B 0x7B
|
|
#define AUE_GPIO0 0x7E
|
|
#define AUE_GPIO1 0x7F
|
|
#define AUE_REG_81 0x81
|
|
|
|
#define AUE_CTL0_INCLUDE_RXCRC 0x01
|
|
#define AUE_CTL0_ALLMULTI 0x02
|
|
#define AUE_CTL0_STOP_BACKOFF 0x04
|
|
#define AUE_CTL0_RXSTAT_APPEND 0x08
|
|
#define AUE_CTL0_WAKEON_ENB 0x10
|
|
#define AUE_CTL0_RXPAUSE_ENB 0x20
|
|
#define AUE_CTL0_RX_ENB 0x40
|
|
#define AUE_CTL0_TX_ENB 0x80
|
|
|
|
#define AUE_CTL1_HOMELAN 0x04
|
|
#define AUE_CTL1_RESETMAC 0x08
|
|
#define AUE_CTL1_SPEEDSEL 0x10 /* 0 = 10mbps, 1 = 100mbps */
|
|
#define AUE_CTL1_DUPLEX 0x20 /* 0 = half, 1 = full */
|
|
#define AUE_CTL1_DELAYHOME 0x40
|
|
|
|
#define AUE_CTL2_EP3_CLR 0x01 /* reading EP3 clrs status regs */
|
|
#define AUE_CTL2_RX_BADFRAMES 0x02
|
|
#define AUE_CTL2_RX_PROMISC 0x04
|
|
#define AUE_CTL2_LOOPBACK 0x08
|
|
#define AUE_CTL2_EEPROMWR_ENB 0x10
|
|
#define AUE_CTL2_EEPROM_LOAD 0x20
|
|
|
|
#define AUE_EECTL_WRITE 0x01
|
|
#define AUE_EECTL_READ 0x02
|
|
#define AUE_EECTL_DONE 0x04
|
|
|
|
#define AUE_PHYCTL_PHYREG 0x1F
|
|
#define AUE_PHYCTL_WRITE 0x20
|
|
#define AUE_PHYCTL_READ 0x40
|
|
#define AUE_PHYCTL_DONE 0x80
|
|
|
|
#define AUE_USBSTS_SUSPEND 0x01
|
|
#define AUE_USBSTS_RESUME 0x02
|
|
|
|
#define AUE_TXSTAT0_JABTIMO 0x04
|
|
#define AUE_TXSTAT0_CARLOSS 0x08
|
|
#define AUE_TXSTAT0_NOCARRIER 0x10
|
|
#define AUE_TXSTAT0_LATECOLL 0x20
|
|
#define AUE_TXSTAT0_EXCESSCOLL 0x40
|
|
#define AUE_TXSTAT0_UNDERRUN 0x80
|
|
|
|
#define AUE_TXSTAT1_PKTCNT 0x0F
|
|
#define AUE_TXSTAT1_FIFO_EMPTY 0x40
|
|
#define AUE_TXSTAT1_FIFO_FULL 0x80
|
|
|
|
#define AUE_RXSTAT_OVERRUN 0x01
|
|
#define AUE_RXSTAT_PAUSE 0x02
|
|
|
|
#define AUE_GPIO_IN0 0x01
|
|
#define AUE_GPIO_OUT0 0x02
|
|
#define AUE_GPIO_SEL0 0x04
|
|
#define AUE_GPIO_IN1 0x08
|
|
#define AUE_GPIO_OUT1 0x10
|
|
#define AUE_GPIO_SEL1 0x20
|
|
|
|
struct aue_intrpkt {
|
|
u_int8_t aue_txstat0;
|
|
u_int8_t aue_txstat1;
|
|
u_int8_t aue_rxstat;
|
|
u_int8_t aue_rxlostpkt0;
|
|
u_int8_t aue_rxlostpkt1;
|
|
u_int8_t aue_wakeupstat;
|
|
u_int8_t aue_rsvd;
|
|
};
|
|
|
|
struct aue_rxpkt {
|
|
u_int16_t aue_pktlen;
|
|
u_int8_t aue_rxstat;
|
|
};
|
|
|
|
#define AUE_RXSTAT_MCAST 0x01
|
|
#define AUE_RXSTAT_GIANT 0x02
|
|
#define AUE_RXSTAT_RUNT 0x04
|
|
#define AUE_RXSTAT_CRCERR 0x08
|
|
#define AUE_RXSTAT_DRIBBLE 0x10
|
|
#define AUE_RXSTAT_MASK 0x1E
|
|
|
|
struct aue_type {
|
|
u_int16_t aue_vid;
|
|
u_int16_t aue_did;
|
|
u_int16_t aue_flags;
|
|
#define LSYS 0x0001 /* use Linksys reset */
|
|
#define PNA 0x0002 /* has Home PNA */
|
|
#define PII 0x0004 /* Pegasus II chip */
|
|
};
|
|
|
|
#define AUE_TX_LIST_CNT 1
|
|
#define AUE_RX_LIST_CNT 1
|
|
|
|
struct aue_softc;
|
|
|
|
struct aue_chain {
|
|
struct aue_softc *aue_sc;
|
|
usbd_xfer_handle aue_xfer;
|
|
char *aue_buf;
|
|
struct mbuf *aue_mbuf;
|
|
int aue_idx;
|
|
};
|
|
|
|
struct aue_cdata {
|
|
struct aue_chain aue_tx_chain[AUE_TX_LIST_CNT];
|
|
struct aue_chain aue_rx_chain[AUE_RX_LIST_CNT];
|
|
struct aue_intrpkt *aue_ibuf;
|
|
int aue_tx_prod;
|
|
int aue_tx_cons;
|
|
int aue_tx_cnt;
|
|
int aue_rx_prod;
|
|
};
|
|
|
|
#define AUE_INC(x, y) (x) = (x + 1) % y
|
|
|
|
struct aue_softc {
|
|
struct arpcom arpcom;
|
|
device_t aue_miibus;
|
|
usbd_device_handle aue_udev;
|
|
usbd_interface_handle aue_iface;
|
|
struct aue_type *aue_info;
|
|
int aue_ed[AUE_ENDPT_MAX];
|
|
usbd_pipe_handle aue_ep[AUE_ENDPT_MAX];
|
|
int aue_unit;
|
|
u_int8_t aue_link;
|
|
u_int8_t aue_gone;
|
|
int aue_if_flags;
|
|
struct aue_cdata aue_cdata;
|
|
struct callout_handle aue_stat_ch;
|
|
struct mtx aue_mtx;
|
|
};
|
|
|
|
#if 0
|
|
#define AUE_LOCK(_sc) mtx_lock(&(_sc)->aue_mtx)
|
|
#define AUE_UNLOCK(_sc) mtx_unlock(&(_sc)->aue_mtx)
|
|
#else
|
|
#define AUE_LOCK(_sc)
|
|
#define AUE_UNLOCK(_sc)
|
|
#endif
|
|
|
|
#define AUE_TIMEOUT 1000
|
|
#define ETHER_ALIGN 2
|
|
#define AUE_BUFSZ 1536
|
|
#define AUE_MIN_FRAMELEN 60
|
|
#define AUE_INTR_INTERVAL 100 /* ms */
|