8703cd1dab
Add code to properly detach/attach disks that are part of a RAID. Mark a disk that is attached on an ATA channel belonging to a RAID as a spare disk that can be used for rebuilding failed RAID1's. Add support for rebuilding failed RAID1's. Several fixes to the detach/attach code. For replacing a disk in a failed RAID1 do the following: Find the controller channel# of the failed disk. Exec 'atacontrol detach <channel#>' to free the disk from the system. Replace the failed disk with a new one of at least the same size. If your have your disks in drawers/enclosures this can be done with the system still running. Exec 'atacontrol attach <channel#>' to add the disk to the system and mark it as a valid spare for rebuild. Exec 'atacontrol rebuild <array#>' The system will rebuild the array on the fly, the array can still be used during this, although with slower performance. Please let me know of any problems with this! Sponsored by: Advanis Inc. MFC after: 2 weeks
804 lines
23 KiB
C
804 lines
23 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000,2001,2002 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/sysctl.h>
|
|
#include <machine/stdarg.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#ifdef __alpha__
|
|
#include <machine/md_var.h>
|
|
#endif
|
|
#include <sys/rman.h>
|
|
#include <pci/pcivar.h>
|
|
#include <pci/pcireg.h>
|
|
#include <dev/ata/ata-all.h>
|
|
|
|
/* device structures */
|
|
struct ata_pci_controller {
|
|
struct resource *bmio;
|
|
int bmaddr;
|
|
struct resource *irq;
|
|
int irqcnt;
|
|
};
|
|
|
|
/* misc defines */
|
|
#define IOMASK 0xfffffffc
|
|
#define GRANDPARENT(dev) device_get_parent(device_get_parent(dev))
|
|
#define ATA_MASTERDEV(dev) ((pci_get_progif(dev) & 0x80) && \
|
|
(pci_get_progif(dev) & 0x05) != 0x05)
|
|
|
|
int
|
|
ata_find_dev(device_t dev, u_int32_t devid, u_int32_t revid)
|
|
{
|
|
device_t *children;
|
|
int nchildren, i;
|
|
|
|
if (device_get_children(device_get_parent(dev), &children, &nchildren))
|
|
return 0;
|
|
|
|
for (i = 0; i < nchildren; i++) {
|
|
if (pci_get_devid(children[i]) == devid &&
|
|
pci_get_revid(children[i]) >= revid) {
|
|
free(children, M_TEMP);
|
|
return 1;
|
|
}
|
|
}
|
|
free(children, M_TEMP);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ata_via_southbridge_fixup(device_t dev)
|
|
{
|
|
device_t *children;
|
|
int nchildren, i;
|
|
|
|
if (device_get_children(device_get_parent(dev), &children, &nchildren))
|
|
return;
|
|
|
|
for (i = 0; i < nchildren; i++) {
|
|
if (pci_get_devid(children[i]) == 0x03051106 || /* VIA VT8363 */
|
|
pci_get_devid(children[i]) == 0x03911106 || /* VIA VT8371 */
|
|
pci_get_devid(children[i]) == 0x31021106 || /* VIA VT8662 */
|
|
pci_get_devid(children[i]) == 0x31121106) { /* VIA VT8361 */
|
|
u_int8_t reg76 = pci_read_config(children[i], 0x76, 1);
|
|
|
|
if ((reg76 & 0xf0) != 0xd0) {
|
|
device_printf(dev,
|
|
"Correcting VIA config for southbridge data corruption bug\n");
|
|
pci_write_config(children[i], 0x75, 0x80, 1);
|
|
pci_write_config(children[i], 0x76, (reg76 & 0x0f) | 0xd0, 1);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
free(children, M_TEMP);
|
|
}
|
|
|
|
static const char *
|
|
ata_pci_match(device_t dev)
|
|
{
|
|
if (pci_get_class(dev) != PCIC_STORAGE)
|
|
return NULL;
|
|
|
|
switch (pci_get_devid(dev)) {
|
|
/* supported chipsets */
|
|
case 0x12308086:
|
|
return "Intel PIIX ATA controller";
|
|
|
|
case 0x70108086:
|
|
return "Intel PIIX3 ATA controller";
|
|
|
|
case 0x71118086:
|
|
case 0x71998086:
|
|
case 0x84ca8086:
|
|
return "Intel PIIX4 ATA33 controller";
|
|
|
|
case 0x24218086:
|
|
return "Intel ICH0 ATA33 controller";
|
|
|
|
case 0x24118086:
|
|
case 0x76018086:
|
|
return "Intel ICH ATA66 controller";
|
|
|
|
case 0x244a8086:
|
|
case 0x244b8086:
|
|
return "Intel ICH2 ATA100 controller";
|
|
|
|
case 0x248a8086:
|
|
case 0x248b8086:
|
|
return "Intel ICH3 ATA100 controller";
|
|
|
|
case 0x522910b9:
|
|
if (pci_get_revid(dev) >= 0xc4)
|
|
return "AcerLabs Aladdin ATA100 controller";
|
|
else if (pci_get_revid(dev) >= 0xc2)
|
|
return "AcerLabs Aladdin ATA66 controller";
|
|
else if (pci_get_revid(dev) >= 0x20)
|
|
return "AcerLabs Aladdin ATA33 controller";
|
|
else
|
|
return "AcerLabs Aladdin ATA controller";
|
|
|
|
case 0x05711106:
|
|
if (ata_find_dev(dev, 0x05861106, 0x02))
|
|
return "VIA 82C586 ATA33 controller";
|
|
if (ata_find_dev(dev, 0x05861106, 0))
|
|
return "VIA 82C586 ATA controller";
|
|
if (ata_find_dev(dev, 0x05961106, 0x12))
|
|
return "VIA 82C596 ATA66 controller";
|
|
if (ata_find_dev(dev, 0x05961106, 0))
|
|
return "VIA 82C596 ATA33 controller";
|
|
if (ata_find_dev(dev, 0x06861106, 0x40))
|
|
return "VIA 82C686 ATA100 controller";
|
|
if (ata_find_dev(dev, 0x06861106, 0x10))
|
|
return "VIA 82C686 ATA66 controller";
|
|
if (ata_find_dev(dev, 0x06861106, 0))
|
|
return "VIA 82C686 ATA33 controller";
|
|
if (ata_find_dev(dev, 0x82311106, 0))
|
|
return "VIA 8231 ATA100 controller";
|
|
if (ata_find_dev(dev, 0x30741106, 0) ||
|
|
ata_find_dev(dev, 0x31091106, 0))
|
|
return "VIA 8233 ATA100 controller";
|
|
if (ata_find_dev(dev, 0x31471106, 0))
|
|
return "VIA 8233 ATA133 controller";
|
|
return "VIA Apollo ATA controller";
|
|
|
|
case 0x55131039:
|
|
if (ata_find_dev(dev, 0x06301039, 0x30) ||
|
|
ata_find_dev(dev, 0x06331039, 0x00) ||
|
|
ata_find_dev(dev, 0x06351039, 0x00) ||
|
|
ata_find_dev(dev, 0x06401039, 0x00) ||
|
|
ata_find_dev(dev, 0x06451039, 0x00) ||
|
|
ata_find_dev(dev, 0x06501039, 0x00) ||
|
|
ata_find_dev(dev, 0x07301039, 0x00) ||
|
|
ata_find_dev(dev, 0x07331039, 0x00) ||
|
|
ata_find_dev(dev, 0x07351039, 0x00) ||
|
|
ata_find_dev(dev, 0x07401039, 0x00) ||
|
|
ata_find_dev(dev, 0x07451039, 0x00) ||
|
|
ata_find_dev(dev, 0x07501039, 0x00))
|
|
return "SiS 5591 ATA100 controller";
|
|
else if (ata_find_dev(dev, 0x05301039, 0x00) ||
|
|
ata_find_dev(dev, 0x05401039, 0x00) ||
|
|
ata_find_dev(dev, 0x06201039, 0x00) ||
|
|
ata_find_dev(dev, 0x06301039, 0x00))
|
|
return "SiS 5591 ATA66 controller";
|
|
else
|
|
return "SiS 5591 ATA33 controller";
|
|
|
|
case 0x06491095:
|
|
return "CMD 649 ATA100 controller";
|
|
|
|
case 0x06481095:
|
|
return "CMD 648 ATA66 controller";
|
|
|
|
case 0x06461095:
|
|
return "CMD 646 ATA controller";
|
|
|
|
case 0xc6931080:
|
|
if (pci_get_subclass(dev) == PCIS_STORAGE_IDE)
|
|
return "Cypress 82C693 ATA controller";
|
|
return NULL;
|
|
|
|
case 0x01021078:
|
|
return "Cyrix 5530 ATA33 controller";
|
|
|
|
case 0x74091022:
|
|
return "AMD 756 ATA66 controller";
|
|
|
|
case 0x74111022:
|
|
return "AMD 766 ATA100 controller";
|
|
|
|
case 0x02111166:
|
|
return "ServerWorks ROSB4 ATA33 controller";
|
|
|
|
case 0x4d33105a:
|
|
return "Promise ATA33 controller";
|
|
|
|
case 0x4d38105a:
|
|
return "Promise ATA66 controller";
|
|
|
|
case 0x0d30105a:
|
|
case 0x4d30105a:
|
|
return "Promise ATA100 controller";
|
|
|
|
case 0x4d68105a:
|
|
case 0x6268105a:
|
|
if (pci_get_devid(GRANDPARENT(dev)) == 0x00221011 &&
|
|
pci_get_class(GRANDPARENT(dev)) == PCIC_BRIDGE) {
|
|
static long start = 0, end = 0;
|
|
|
|
/* we belive we are on a TX4, now do our (simple) magic */
|
|
if (pci_get_slot(dev) == 1) {
|
|
bus_get_resource(dev, SYS_RES_IRQ, 0, &start, &end);
|
|
return "Promise TX4 ATA100 controller (channel 0+1)";
|
|
}
|
|
else if (pci_get_slot(dev) == 2 && start && end) {
|
|
bus_set_resource(dev, SYS_RES_IRQ, 0, start, end);
|
|
start = end = 0;
|
|
return "Promise TX4 ATA100 controller (channel 2+3)";
|
|
}
|
|
else
|
|
start = end = 0;
|
|
}
|
|
return "Promise TX2 ATA100 controller";
|
|
|
|
case 0x4d69105a:
|
|
return "Promise TX2 ATA133 controller";
|
|
|
|
case 0x00041103:
|
|
switch (pci_get_revid(dev)) {
|
|
case 0x00:
|
|
case 0x01:
|
|
return "HighPoint HPT366 ATA66 controller";
|
|
case 0x02:
|
|
return "HighPoint HPT368 ATA66 controller";
|
|
case 0x03:
|
|
case 0x04:
|
|
return "HighPoint HPT370 ATA100 controller";
|
|
case 0x05:
|
|
return "HighPoint HPT372 ATA133 controller";
|
|
}
|
|
return NULL;
|
|
|
|
case 0x00051103:
|
|
switch (pci_get_revid(dev)) {
|
|
case 0x01:
|
|
return "HighPoint HPT372 ATA133 controller";
|
|
}
|
|
return NULL;
|
|
|
|
case 0x00081103:
|
|
switch (pci_get_revid(dev)) {
|
|
case 0x07:
|
|
return "HighPoint HPT374 ATA133 controller";
|
|
}
|
|
return NULL;
|
|
|
|
case 0x000116ca:
|
|
return "Cenatek Rocket Drive controller";
|
|
|
|
/* unsupported but known chipsets, generic DMA only */
|
|
case 0x10001042:
|
|
case 0x10011042:
|
|
return "RZ 100? ATA controller !WARNING! buggy chip data loss possible";
|
|
|
|
case 0x06401095:
|
|
return "CMD 640 ATA controller !WARNING! buggy chip data loss possible";
|
|
|
|
/* unknown chipsets, try generic DMA if it seems possible */
|
|
default:
|
|
if (pci_get_class(dev) == PCIC_STORAGE &&
|
|
(pci_get_subclass(dev) == PCIS_STORAGE_IDE))
|
|
return "Generic PCI ATA controller";
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static int
|
|
ata_pci_probe(device_t dev)
|
|
{
|
|
const char *desc = ata_pci_match(dev);
|
|
|
|
if (desc) {
|
|
device_set_desc(dev, desc);
|
|
return 0;
|
|
}
|
|
else
|
|
return ENXIO;
|
|
}
|
|
|
|
static int
|
|
ata_pci_add_child(device_t dev, int unit)
|
|
{
|
|
device_t child;
|
|
|
|
/* check if this is located at one of the std addresses */
|
|
if (ATA_MASTERDEV(dev)) {
|
|
if (!(child = device_add_child(dev, "ata", unit)))
|
|
return ENOMEM;
|
|
}
|
|
else {
|
|
if (!(child =
|
|
device_add_child(dev, "ata",
|
|
devclass_find_free_unit(ata_devclass, 2))))
|
|
return ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_pci_attach(device_t dev)
|
|
{
|
|
struct ata_pci_controller *controller = device_get_softc(dev);
|
|
u_int8_t class, subclass;
|
|
u_int32_t type, cmd;
|
|
int rid;
|
|
|
|
/* set up vendor-specific stuff */
|
|
type = pci_get_devid(dev);
|
|
class = pci_get_class(dev);
|
|
subclass = pci_get_subclass(dev);
|
|
cmd = pci_read_config(dev, PCIR_COMMAND, 4);
|
|
|
|
if (!(cmd & PCIM_CMD_PORTEN)) {
|
|
device_printf(dev, "ATA channel disabled by BIOS\n");
|
|
return 0;
|
|
}
|
|
|
|
/* is busmastering supported ? */
|
|
if ((cmd & (PCIM_CMD_PORTEN | PCIM_CMD_BUSMASTEREN)) ==
|
|
(PCIM_CMD_PORTEN | PCIM_CMD_BUSMASTEREN)) {
|
|
|
|
/* is there a valid port range to connect to ? */
|
|
rid = 0x20;
|
|
controller->bmio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
if (!controller->bmio)
|
|
device_printf(dev, "Busmastering DMA not configured\n");
|
|
}
|
|
else
|
|
device_printf(dev, "Busmastering DMA not supported\n");
|
|
|
|
/* do extra chipset specific setups */
|
|
switch (type) {
|
|
case 0x522910b9: /* Aladdin need to activate the ATAPI FIFO */
|
|
pci_write_config(dev, 0x53,
|
|
(pci_read_config(dev, 0x53, 1) & ~0x01) | 0x02, 1);
|
|
break;
|
|
|
|
case 0x4d38105a: /* Promise 66 & 100 (before TX2) need the clock changed */
|
|
case 0x4d30105a:
|
|
case 0x0d30105a:
|
|
ATA_OUTB(controller->bmio, 0x11, ATA_INB(controller->bmio, 0x11)|0x0a);
|
|
/* FALLTHROUGH */
|
|
|
|
case 0x4d33105a: /* Promise (before TX2) need burst mode turned on */
|
|
ATA_OUTB(controller->bmio, 0x1f, ATA_INB(controller->bmio, 0x1f)|0x01);
|
|
break;
|
|
|
|
case 0x00041103: /* HighPoint HPT366/368/370/372 */
|
|
if (pci_get_revid(dev) < 2) { /* HPT 366 */
|
|
/* turn off interrupt prediction */
|
|
pci_write_config(dev, 0x51,
|
|
(pci_read_config(dev, 0x51, 1) & ~0x80), 1);
|
|
break;
|
|
}
|
|
/* FALLTHROUGH */
|
|
|
|
case 0x00051103: /* HighPoint HPT372 */
|
|
case 0x00081103: /* HighPoint HPT374 */
|
|
/* turn off interrupt prediction */
|
|
pci_write_config(dev, 0x51, (pci_read_config(dev, 0x51, 1) & ~0x03), 1);
|
|
pci_write_config(dev, 0x55, (pci_read_config(dev, 0x55, 1) & ~0x03), 1);
|
|
|
|
/* turn on interrupts */
|
|
pci_write_config(dev, 0x5a, (pci_read_config(dev, 0x5a, 1) & ~0x10), 1);
|
|
break;
|
|
|
|
case 0x05711106: /* VIA 82C586, '596, '686 default setup */
|
|
/* prepare for ATA-66 on the 82C686a and 82C596b */
|
|
if ((ata_find_dev(dev, 0x06861106, 0x10) &&
|
|
!ata_find_dev(dev, 0x06861106, 0x40)) ||
|
|
ata_find_dev(dev, 0x05961106, 0x12))
|
|
pci_write_config(dev, 0x50, 0x030b030b, 4);
|
|
|
|
/* the southbridge might need the data corruption fix */
|
|
if (ata_find_dev(dev, 0x06861106, 0x40) ||
|
|
ata_find_dev(dev, 0x82311106, 0x10))
|
|
ata_via_southbridge_fixup(dev);
|
|
/* FALLTHROUGH */
|
|
|
|
case 0x74091022: /* AMD 756 default setup */
|
|
case 0x74111022: /* AMD 766 default setup */
|
|
|
|
/* set prefetch, postwrite */
|
|
pci_write_config(dev, 0x41, pci_read_config(dev, 0x41, 1) | 0xf0, 1);
|
|
|
|
/* set fifo configuration half'n'half */
|
|
pci_write_config(dev, 0x43,
|
|
(pci_read_config(dev, 0x43, 1) & 0x90) | 0x2a, 1);
|
|
|
|
/* set status register read retry */
|
|
pci_write_config(dev, 0x44, pci_read_config(dev, 0x44, 1) | 0x08, 1);
|
|
|
|
/* set DMA read & end-of-sector fifo flush */
|
|
pci_write_config(dev, 0x46,
|
|
(pci_read_config(dev, 0x46, 1) & 0x0c) | 0xf0, 1);
|
|
|
|
/* set sector size */
|
|
pci_write_config(dev, 0x60, DEV_BSIZE, 2);
|
|
pci_write_config(dev, 0x68, DEV_BSIZE, 2);
|
|
break;
|
|
|
|
case 0x10001042: /* RZ 100? known bad, no DMA */
|
|
case 0x10011042:
|
|
case 0x06401095: /* CMD 640 known bad, no DMA */
|
|
controller->bmio = NULL;
|
|
device_printf(dev, "Busmastering DMA disabled\n");
|
|
}
|
|
|
|
if (controller->bmio) {
|
|
controller->bmaddr = rman_get_start(controller->bmio);
|
|
BUS_RELEASE_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IOPORT, rid, controller->bmio);
|
|
controller->bmio = NULL;
|
|
}
|
|
|
|
/*
|
|
* the Cypress chip is a mess, it contains two ATA functions, but
|
|
* both channels are visible on the first one.
|
|
* simply ignore the second function for now, as the right
|
|
* solution (ignoring the second channel on the first function)
|
|
* doesn't work with the crappy ATA interrupt setup on the alpha.
|
|
*/
|
|
if (pci_get_devid(dev) == 0xc6931080 && pci_get_function(dev) > 1)
|
|
return 0;
|
|
|
|
ata_pci_add_child(dev, 0);
|
|
|
|
if (ATA_MASTERDEV(dev) || pci_read_config(dev, 0x18, 4) & IOMASK)
|
|
ata_pci_add_child(dev, 1);
|
|
|
|
return bus_generic_attach(dev);
|
|
}
|
|
|
|
static int
|
|
ata_pci_intr(struct ata_channel *ch)
|
|
{
|
|
u_int8_t dmastat;
|
|
|
|
/*
|
|
* since we might share the IRQ with another device, and in some
|
|
* cases with our twin channel, we only want to process interrupts
|
|
* that we know this channel generated.
|
|
*/
|
|
switch (ch->chiptype) {
|
|
case 0x00041103: /* HighPoint HPT366/368/370/372 */
|
|
case 0x00051103: /* HighPoint HPT372 */
|
|
case 0x00081103: /* HighPoint HPT374 */
|
|
if (((dmastat = ata_dmastatus(ch)) &
|
|
(ATA_BMSTAT_ACTIVE | ATA_BMSTAT_INTERRUPT)) != ATA_BMSTAT_INTERRUPT)
|
|
return 1;
|
|
ATA_OUTB(ch->r_bmio, ATA_BMSTAT_PORT, dmastat | ATA_BMSTAT_INTERRUPT);
|
|
DELAY(1);
|
|
return 0;
|
|
|
|
case 0x06481095: /* CMD 648 */
|
|
case 0x06491095: /* CMD 649 */
|
|
if (!(pci_read_config(device_get_parent(ch->dev), 0x71, 1) &
|
|
(ch->unit ? 0x08 : 0x04)))
|
|
return 1;
|
|
break;
|
|
|
|
case 0x4d33105a: /* Promise Ultra/Fasttrak 33 */
|
|
case 0x4d38105a: /* Promise Ultra/Fasttrak 66 */
|
|
case 0x4d30105a: /* Promise Ultra/Fasttrak 100 */
|
|
case 0x0d30105a: /* Promise OEM ATA100 */
|
|
if (!(ATA_INL(ch->r_bmio, (ch->unit ? 0x14 : 0x1c)) &
|
|
(ch->unit ? 0x00004000 : 0x00000400)))
|
|
return 1;
|
|
break;
|
|
|
|
case 0x4d68105a: /* Promise TX2 ATA100 */
|
|
case 0x6268105a: /* Promise TX2 ATA100 */
|
|
case 0x4d69105a: /* Promise TX2 ATA133 */
|
|
ATA_OUTB(ch->r_bmio, ATA_BMDEVSPEC_0, 0x0b);
|
|
if (!(ATA_INB(ch->r_bmio, ATA_BMDEVSPEC_1) & 0x20))
|
|
return 1;
|
|
break;
|
|
}
|
|
|
|
if (ch->flags & ATA_DMA_ACTIVE) {
|
|
if (!((dmastat = ata_dmastatus(ch)) & ATA_BMSTAT_INTERRUPT))
|
|
return 1;
|
|
ATA_OUTB(ch->r_bmio, ATA_BMSTAT_PORT, dmastat | ATA_BMSTAT_INTERRUPT);
|
|
DELAY(1);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_pci_print_child(device_t dev, device_t child)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(child);
|
|
int retval = 0;
|
|
|
|
retval += bus_print_child_header(dev, child);
|
|
retval += printf(": at 0x%lx", rman_get_start(ch->r_io));
|
|
|
|
if (ATA_MASTERDEV(dev))
|
|
retval += printf(" irq %d", 14 + ch->unit);
|
|
|
|
retval += bus_print_child_footer(dev, child);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static struct resource *
|
|
ata_pci_alloc_resource(device_t dev, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct ata_pci_controller *controller = device_get_softc(dev);
|
|
struct resource *res = NULL;
|
|
int unit = ((struct ata_channel *)device_get_softc(child))->unit;
|
|
int myrid;
|
|
|
|
if (type == SYS_RES_IOPORT) {
|
|
switch (*rid) {
|
|
case ATA_IOADDR_RID:
|
|
if (ATA_MASTERDEV(dev)) {
|
|
myrid = 0;
|
|
start = (unit ? ATA_SECONDARY : ATA_PRIMARY);
|
|
end = start + ATA_IOSIZE - 1;
|
|
count = ATA_IOSIZE;
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IOPORT, &myrid,
|
|
start, end, count, flags);
|
|
}
|
|
else {
|
|
myrid = 0x10 + 8 * unit;
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IOPORT, &myrid,
|
|
start, end, count, flags);
|
|
}
|
|
break;
|
|
|
|
case ATA_ALTADDR_RID:
|
|
if (ATA_MASTERDEV(dev)) {
|
|
myrid = 0;
|
|
start = (unit ? ATA_SECONDARY : ATA_PRIMARY) + ATA_ALTOFFSET;
|
|
end = start + ATA_ALTIOSIZE - 1;
|
|
count = ATA_ALTIOSIZE;
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IOPORT, &myrid,
|
|
start, end, count, flags);
|
|
}
|
|
else {
|
|
myrid = 0x14 + 8 * unit;
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IOPORT, &myrid,
|
|
start, end, count, flags);
|
|
if (res) {
|
|
start = rman_get_start(res) + 2;
|
|
end = rman_get_start(res) + ATA_ALTIOSIZE - 1;
|
|
count = ATA_ALTIOSIZE;
|
|
BUS_RELEASE_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IOPORT, myrid, res);
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IOPORT, &myrid,
|
|
start, end, count, flags);
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ATA_BMADDR_RID:
|
|
if (controller->bmaddr) {
|
|
myrid = 0x20;
|
|
start = (unit == 0 ?
|
|
controller->bmaddr : controller->bmaddr+ATA_BMIOSIZE);
|
|
end = start + ATA_BMIOSIZE - 1;
|
|
count = ATA_BMIOSIZE;
|
|
res = BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IOPORT, &myrid,
|
|
start, end, count, flags);
|
|
}
|
|
}
|
|
return res;
|
|
}
|
|
|
|
if (type == SYS_RES_IRQ && *rid == ATA_IRQ_RID) {
|
|
if (ATA_MASTERDEV(dev)) {
|
|
#ifdef __alpha__
|
|
return alpha_platform_alloc_ide_intr(unit);
|
|
#else
|
|
int irq = (unit == 0 ? 14 : 15);
|
|
|
|
return BUS_ALLOC_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IRQ, rid, irq, irq, 1, flags);
|
|
#endif
|
|
}
|
|
else {
|
|
/* primary and secondary channels share interrupt, keep track */
|
|
if (!controller->irq)
|
|
controller->irq = BUS_ALLOC_RESOURCE(device_get_parent(dev),
|
|
dev, SYS_RES_IRQ,
|
|
rid, 0, ~0, 1, flags);
|
|
controller->irqcnt++;
|
|
return controller->irq;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_pci_release_resource(device_t dev, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
struct ata_pci_controller *controller = device_get_softc(dev);
|
|
int unit = ((struct ata_channel *)device_get_softc(child))->unit;
|
|
|
|
if (type == SYS_RES_IOPORT) {
|
|
switch (rid) {
|
|
case ATA_IOADDR_RID:
|
|
if (ATA_MASTERDEV(dev))
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IOPORT, 0x0, r);
|
|
else
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IOPORT, 0x10 + 8 * unit, r);
|
|
break;
|
|
|
|
case ATA_ALTADDR_RID:
|
|
if (ATA_MASTERDEV(dev))
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IOPORT, 0x0, r);
|
|
else
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IOPORT, 0x14 + 8 * unit, r);
|
|
break;
|
|
|
|
case ATA_BMADDR_RID:
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IOPORT, 0x20, r);
|
|
default:
|
|
return ENOENT;
|
|
}
|
|
}
|
|
if (type == SYS_RES_IRQ) {
|
|
if (rid != ATA_IRQ_RID)
|
|
return ENOENT;
|
|
|
|
if (ATA_MASTERDEV(dev)) {
|
|
#ifdef __alpha__
|
|
return alpha_platform_release_ide_intr(unit, r);
|
|
#else
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(dev), child,
|
|
SYS_RES_IRQ, rid, r);
|
|
#endif
|
|
}
|
|
else {
|
|
/* primary and secondary channels share interrupt, keep track */
|
|
if (--controller->irqcnt)
|
|
return 0;
|
|
controller->irq = NULL;
|
|
return BUS_RELEASE_RESOURCE(device_get_parent(dev), dev,
|
|
SYS_RES_IRQ, rid, r);
|
|
}
|
|
}
|
|
return EINVAL;
|
|
}
|
|
|
|
static int
|
|
ata_pci_setup_intr(device_t dev, device_t child, struct resource *irq,
|
|
int flags, driver_intr_t *intr, void *arg,
|
|
void **cookiep)
|
|
{
|
|
if (ATA_MASTERDEV(dev)) {
|
|
#ifdef __alpha__
|
|
return alpha_platform_setup_ide_intr(child, irq, intr, arg, cookiep);
|
|
#else
|
|
return BUS_SETUP_INTR(device_get_parent(dev), child, irq,
|
|
flags, intr, arg, cookiep);
|
|
#endif
|
|
}
|
|
else
|
|
return BUS_SETUP_INTR(device_get_parent(dev), dev, irq,
|
|
flags, intr, arg, cookiep);
|
|
}
|
|
|
|
static int
|
|
ata_pci_teardown_intr(device_t dev, device_t child, struct resource *irq,
|
|
void *cookie)
|
|
{
|
|
if (ATA_MASTERDEV(dev)) {
|
|
#ifdef __alpha__
|
|
return alpha_platform_teardown_ide_intr(child, irq, cookie);
|
|
#else
|
|
return BUS_TEARDOWN_INTR(device_get_parent(dev), child, irq, cookie);
|
|
#endif
|
|
}
|
|
else
|
|
return BUS_TEARDOWN_INTR(device_get_parent(dev), dev, irq, cookie);
|
|
}
|
|
|
|
static device_method_t ata_pci_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, ata_pci_probe),
|
|
DEVMETHOD(device_attach, ata_pci_attach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
|
|
/* bus methods */
|
|
DEVMETHOD(bus_print_child, ata_pci_print_child),
|
|
DEVMETHOD(bus_alloc_resource, ata_pci_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, ata_pci_release_resource),
|
|
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, ata_pci_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, ata_pci_teardown_intr),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ata_pci_driver = {
|
|
"atapci",
|
|
ata_pci_methods,
|
|
sizeof(struct ata_pci_controller),
|
|
};
|
|
|
|
static devclass_t ata_pci_devclass;
|
|
|
|
DRIVER_MODULE(atapci, pci, ata_pci_driver, ata_pci_devclass, 0, 0);
|
|
|
|
static int
|
|
ata_pcisub_probe(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
device_t *children;
|
|
int count, i;
|
|
|
|
/* find channel number on this controller */
|
|
device_get_children(device_get_parent(dev), &children, &count);
|
|
for (i = 0; i < count; i++) {
|
|
if (children[i] == dev)
|
|
ch->unit = i;
|
|
}
|
|
free(children, M_TEMP);
|
|
ch->chiptype = pci_get_devid(device_get_parent(dev));
|
|
ch->intr_func = ata_pci_intr;
|
|
return ata_probe(dev);
|
|
}
|
|
|
|
static device_method_t ata_pcisub_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, ata_pcisub_probe),
|
|
DEVMETHOD(device_attach, ata_attach),
|
|
DEVMETHOD(device_detach, ata_detach),
|
|
DEVMETHOD(device_resume, ata_resume),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ata_pcisub_driver = {
|
|
"ata",
|
|
ata_pcisub_methods,
|
|
sizeof(struct ata_channel),
|
|
};
|
|
|
|
DRIVER_MODULE(ata, atapci, ata_pcisub_driver, ata_devclass, 0, 0);
|