Marius Strobl 87a303dc63 - Even after masking the media with IFM_GMASK the result may have bits ...

besides the duplex ones set so just comparing it with IFM_FDX may lead
  to false negatives.
- Simplify ciphy_service() to only set the manual configuration bits
  once after we have figured them all out. This also means we no longer
  unnecessarily update the hardware along the road.

MFC after:	1 week

2011-01-14 19:29:53 +00:00

..

acphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

acphyreg.h

…

amphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

amphyreg.h

…

atphy.c

- Masking IFM_GMASK when also masking IFM_FDX is redundant and just

2011-01-14 19:16:59 +00:00

atphyreg.h

…

axphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

bmtphy.c

- Also probe BCM5214 and BCM5222.

2010-11-22 22:03:11 +00:00

bmtphyreg.h

The NetBSD Foundation has granted permission to remove clause 3 and 4 from

2010-03-03 17:55:51 +00:00

brgphy.c

- Even after masking the media with IFM_GMASK the result may have bits

2011-01-14 19:29:53 +00:00

brgphyreg.h

Correct definition of T2 mode bit of MRBE Message Page 5 Next Page

2010-09-08 21:08:54 +00:00

ciphy.c

- Even after masking the media with IFM_GMASK the result may have bits

2011-01-14 19:29:53 +00:00

ciphyreg.h

…

e1000phy.c

- Masking IFM_GMASK when also masking IFM_FDX is redundant and just

2011-01-14 19:16:59 +00:00

e1000phyreg.h

Add hack to pass controller specific information to phy driver.

2009-09-28 21:03:28 +00:00

exphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

gentbi.c

Given that unlike f.e. rgephy(4) these drivers doen't explicitly start an

2010-11-22 21:20:11 +00:00

icsphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

icsphyreg.h

The NetBSD Foundation has granted permission to remove clause 3 and 4 from

2010-03-03 17:55:51 +00:00

inphy.c

Ensure Bay flow control is disabled as we're going to use IEEE 802.3 annex

2010-11-26 21:41:42 +00:00

inphyreg.h

…

ip1000phy.c

- Masking IFM_GMASK when also masking IFM_FDX is redundant and just

2011-01-14 19:16:59 +00:00

ip1000phyreg.h

…

jmphy.c

Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernet

2010-12-18 23:52:50 +00:00

jmphyreg.h

Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernet

2010-12-18 23:52:50 +00:00

lxtphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

lxtphyreg.h

The NetBSD Foundation has granted permission to remove clause 3 and 4 from

2010-03-03 17:55:51 +00:00

mii_physubr.c

o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control

2010-11-14 13:26:10 +00:00

mii.c

Add missing newlines.

2010-11-22 20:57:44 +00:00

mii.h

o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control

2010-11-14 13:26:10 +00:00

miibus_if.m

…

miidevs

Add RDC Semiconductor R6040 10/100 PHY driver.

2010-12-30 23:50:25 +00:00

miivar.h

o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control

2010-11-14 13:26:10 +00:00

mlphy.c

- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective

2010-10-24 12:51:02 +00:00

nsgphy.c

- Add a comment regarding the fact that as documented in the datasheet

2010-12-21 21:12:18 +00:00

nsgphyreg.h

…

nsphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

nsphyreg.h

The NetBSD Foundation has granted permission to remove clause 3 and 4 from

2010-03-03 17:55:51 +00:00

nsphyter.c

Add support for flow control.

2010-11-22 21:24:29 +00:00

nsphyterreg.h

The NetBSD Foundation has granted permission to remove clause 3 and 4 from

2010-03-03 17:55:51 +00:00

pnaphy.c

Take advantage of mii_phy_add_media()/mii_phy_setmedia().

2010-10-24 11:38:25 +00:00

qsphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

qsphyreg.h

The NetBSD Foundation has granted permission to remove clause 3 and 4 from

2010-03-03 17:55:51 +00:00

rdcphy.c

Add RDC Semiconductor R6040 10/100 PHY driver.

2010-12-30 23:50:25 +00:00

rdcphyreg.h

Add RDC Semiconductor R6040 10/100 PHY driver.

2010-12-30 23:50:25 +00:00

rgephy.c

- Change these drivers to take advantage and use the generic IEEE 802.3

2010-11-14 13:31:01 +00:00

rgephyreg.h

…

rlphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

rlswitch.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

ruephy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

ruephyreg.h

…

smcphy.c

o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control

2010-11-14 13:26:10 +00:00

tdkphy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

tdkphyreg.h

…

tlphy.c

- Add IFM_10_2 and IFM_10_5 media via tlphy(4) only in case the respective

2010-10-24 12:51:02 +00:00

tlphyreg.h

- Remove clause 3 and 4 from TNF licenses.

2010-09-26 22:11:41 +00:00

truephy.c

Convert the PHY drivers to honor the mii_flags passed down and convert

2010-10-15 14:52:11 +00:00

truephyreg.h

…

ukphy_subr.c

o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control

2010-11-14 13:26:10 +00:00

ukphy.c

Given that unlike f.e. rgephy(4) this driver doesn't explicitly start an

2010-11-22 21:13:42 +00:00

xmphy.c

- Even after masking the media with IFM_GMASK the result may have bits

2011-01-14 19:29:53 +00:00

xmphyreg.h

…