freebsd-skq/sys/dev/pci/pci_pci.c

452 lines
14 KiB
C

/*-
* Copyright (c) 1994,1995 Stefan Esser, Wolfgang StanglMeier
* Copyright (c) 2000 Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* PCI:PCI bridge support.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <machine/resource.h>
#include <pci/pcivar.h>
#include <pci/pcireg.h>
#include "pcib_if.h"
#include "opt_pci.h"
/*
* Bridge-specific data.
*/
struct pcib_softc
{
device_t dev;
u_int16_t command; /* command register */
u_int8_t secbus; /* secondary bus number */
u_int8_t subbus; /* subordinate bus number */
pci_addr_t pmembase; /* base address of prefetchable memory */
pci_addr_t pmemlimit; /* topmost address of prefetchable memory */
pci_addr_t membase; /* base address of memory window */
pci_addr_t memlimit; /* topmost address of memory window */
u_int32_t iobase; /* base address of port window */
u_int32_t iolimit; /* topmost address of port window */
u_int16_t secstat; /* secondary bus status register */
u_int16_t bridgectl; /* bridge control register */
u_int8_t seclat; /* secondary bus latency timer */
};
static int pcib_probe(device_t dev);
static int pcib_attach(device_t dev);
static int pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result);
static int pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value);
static struct resource *pcib_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags);
static int pcib_maxslots(device_t dev);
static u_int32_t pcib_read_config(device_t dev, int b, int s, int f, int reg, int width);
static void pcib_write_config(device_t dev, int b, int s, int f, int reg, u_int32_t val, int width);
static int pcib_route_interrupt(device_t pcib, device_t dev, int pin);
static device_method_t pcib_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pcib_probe),
DEVMETHOD(device_attach, pcib_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, pcib_read_ivar),
DEVMETHOD(bus_write_ivar, pcib_write_ivar),
DEVMETHOD(bus_alloc_resource, pcib_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
/* pcib interface */
DEVMETHOD(pcib_maxslots, pcib_maxslots),
DEVMETHOD(pcib_read_config, pcib_read_config),
DEVMETHOD(pcib_write_config, pcib_write_config),
DEVMETHOD(pcib_route_interrupt, pcib_route_interrupt),
{ 0, 0 }
};
static driver_t pcib_driver = {
"pcib",
pcib_methods,
sizeof(struct pcib_softc),
};
static devclass_t pcib_devclass;
DRIVER_MODULE(pcib, pci, pcib_driver, pcib_devclass, 0, 0);
/*
* Generic device interface
*/
static int
pcib_probe(device_t dev)
{
if ((pci_get_class(dev) == PCIC_BRIDGE) &&
(pci_get_subclass(dev) == PCIS_BRIDGE_PCI)) {
device_set_desc(dev, "PCI-PCI bridge");
return(-10000);
}
return(ENXIO);
}
static int
pcib_attach(device_t dev)
{
struct pcib_softc *sc;
device_t child;
u_int8_t iolow;
sc = device_get_softc(dev);
sc->dev = dev;
/*
* Get current bridge configuration.
*/
sc->command = pci_read_config(dev, PCIR_COMMAND, 1);
sc->secbus = pci_read_config(dev, PCIR_SECBUS_1, 1);
sc->subbus = pci_read_config(dev, PCIR_SUBBUS_1, 1);
sc->secstat = pci_read_config(dev, PCIR_SECSTAT_1, 2);
sc->bridgectl = pci_read_config(dev, PCIR_BRIDGECTL_1, 2);
sc->seclat = pci_read_config(dev, PCIR_SECLAT_1, 1);
/*
* Determine current I/O decode.
*/
if (sc->command & PCIM_CMD_PORTEN) {
iolow = pci_read_config(dev, PCIR_IOBASEL_1, 1);
if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) {
sc->iobase = PCI_PPBIOBASE(pci_read_config(dev, PCIR_IOBASEH_1, 2),
pci_read_config(dev, PCIR_IOBASEL_1, 1));
} else {
sc->iobase = PCI_PPBIOBASE(0, pci_read_config(dev, PCIR_IOBASEL_1, 1));
}
iolow = pci_read_config(dev, PCIR_IOLIMITL_1, 1);
if ((iolow & PCIM_BRIO_MASK) == PCIM_BRIO_32) {
sc->iolimit = PCI_PPBIOLIMIT(pci_read_config(dev, PCIR_IOLIMITH_1, 2),
pci_read_config(dev, PCIR_IOLIMITL_1, 1));
} else {
sc->iolimit = PCI_PPBIOLIMIT(0, pci_read_config(dev, PCIR_IOLIMITL_1, 1));
}
}
/*
* Determine current memory decode.
*/
if (sc->command & PCIM_CMD_MEMEN) {
sc->membase = PCI_PPBMEMBASE(0, pci_read_config(dev, PCIR_MEMBASE_1, 2));
sc->memlimit = PCI_PPBMEMLIMIT(0, pci_read_config(dev, PCIR_MEMLIMIT_1, 2));
sc->pmembase = PCI_PPBMEMBASE((pci_addr_t)pci_read_config(dev, PCIR_PMBASEH_1, 4),
pci_read_config(dev, PCIR_PMBASEL_1, 2));
sc->pmemlimit = PCI_PPBMEMLIMIT((pci_addr_t)pci_read_config(dev, PCIR_PMLIMITH_1, 4),
pci_read_config(dev, PCIR_PMLIMITL_1, 2));
}
/*
* Quirk handling.
*/
switch (pci_get_devid(dev)) {
case 0x12258086: /* Intel 82454KX/GX (Orion) */
{
u_int8_t supbus;
supbus = pci_read_config(dev, 0x41, 1);
if (supbus != 0xff) {
sc->secbus = supbus + 1;
sc->subbus = supbus + 1;
}
}
break;
}
if (bootverbose) {
device_printf(dev, " secondary bus %d\n", sc->secbus);
device_printf(dev, " subordinate bus %d\n", sc->subbus);
device_printf(dev, " I/O decode 0x%x-0x%x\n", sc->iobase, sc->iolimit);
device_printf(dev, " memory decode 0x%x-0x%x\n", sc->membase, sc->memlimit);
device_printf(dev, " prefetched decode 0x%x-0x%x\n", sc->pmembase, sc->pmemlimit);
}
/*
* XXX If the secondary bus number is zero, we should assign a bus number
* since the BIOS hasn't, then initialise the bridge.
*/
/*
* XXX If the subordinate bus number is less than the secondary bus number,
* we should pick a better value. One sensible alternative would be to
* pick 255; the only tradeoff here is that configuration transactions
* would be more widely routed than absolutely necessary.
*/
if (sc->secbus != 0) {
child = device_add_child(dev, "pci", -1);
if (child != NULL)
return(bus_generic_attach(dev));
}
/* no secondary bus; we should have fixed this */
return(0);
}
static int
pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct pcib_softc *sc = device_get_softc(dev);
switch (which) {
case PCIB_IVAR_BUS:
*result = sc->secbus;
return(0);
}
return(ENOENT);
}
static int
pcib_write_ivar(device_t dev, device_t child, int which, uintptr_t value)
{
struct pcib_softc *sc = device_get_softc(dev);
switch (which) {
case PCIB_IVAR_BUS:
sc->secbus = value;
break;
}
return(ENOENT);
}
/*
* Is this a decoded ISA I/O port address? Note, we need to do the mask that
* we do below because of the ISA alias addresses. I'm not 100% sure that
* this is correct.
*/
static int
pcib_is_isa_io(u_long start)
{
if ((start & 0xfffUL) > 0x3ffUL || start == 0)
return (0);
return (1);
}
/*
* Is this a decoded ISA memory address?
*/
static int
pcib_is_isa_mem(u_long start)
{
if (start > 0xfffffUL || start == 0)
return (0);
return (1);
}
/*
* We have to trap resource allocation requests and ensure that the bridge
* is set up to, or capable of handling them.
*/
static struct resource *
pcib_alloc_resource(device_t dev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct pcib_softc *sc = device_get_softc(dev);
/*
* If this is a "default" allocation against this rid, we can't work
* out where it's coming from (we should actually never see these) so we
* just have to punt.
*/
if ((start == 0) && (end == ~0)) {
device_printf(dev, "can't decode default resource id %d for %s%d, bypassing\n",
*rid, device_get_name(child), device_get_unit(child));
} else {
/*
* Fail the allocation for this range if it's not supported.
*
* XXX we should probably just fix up the bridge decode and soldier on.
*/
switch (type) {
case SYS_RES_IOPORT:
if (!pcib_is_isa_io(start)) {
#ifndef PCI_ALLOW_UNSUPPORTED_IO_RANGE
if (start < sc->iobase)
start = sc->iobase;
if (end > sc->iolimit)
end = sc->iolimit;
if (end < start)
start = 0;
#else
if (start < sc->iobase)
printf("start (%x) < sc->iobase (%x)\n", start, sc->iobase);
if (end > sc->iolimit)
printf("end (%x) > sc->iolimit (%x)\n", end, sc->iolimit);
if (end < start)
printf("end (%x) < start (%x)\n", end, start);
#endif
}
if (!pcib_is_isa_io(start) &&
((start < sc->iobase) || (end > sc->iolimit))) {
device_printf(dev, "device %s%d requested unsupported I/O range 0x%lx-0x%lx"
" (decoding 0x%x-0x%x)\n",
device_get_name(child), device_get_unit(child), start, end,
sc->iobase, sc->iolimit);
return (NULL);
}
if (bootverbose)
device_printf(sc->dev, "device %s%d requested decoded I/O range 0x%lx-0x%lx\n",
device_get_name(child), device_get_unit(child), start, end);
break;
/*
* XXX will have to decide whether the device making the request is asking
* for prefetchable memory or not. If it's coming from another bridge
* down the line, do we assume not, or ask the bridge to pass in another
* flag as the request bubbles up?
*/
case SYS_RES_MEMORY:
if (!pcib_is_isa_mem(start)) {
#ifndef PCI_ALLOW_UNSUPPORTED_IO_RANGE
if (start < sc->membase && end > sc->membase)
start = sc->membase;
if (end > sc->memlimit)
end = sc->memlimit;
if (end < start)
start = 0;
#else
if (start < sc->membase && end > sc->membase)
printf("start (%x) < sc->membase (%x)\n", start, sc->membase);
if (end > sc->memlimit)
printf("end (%x) > sc->memlimit (%x)\n", end, sc->memlimit);
if (end < start)
printf("end (%x) < start (%x)\n", end, start);
#endif
}
if (!pcib_is_isa_mem(start) &&
(((start < sc->membase) || (end > sc->memlimit)) &&
((start < sc->pmembase) || (end > sc->pmemlimit)))) {
if (bootverbose)
device_printf(dev,
"device %s%d requested unsupported memory range "
"0x%lx-0x%lx (decoding 0x%x-0x%x, 0x%x-0x%x)\n",
device_get_name(child), device_get_unit(child), start,
end, sc->membase, sc->memlimit, sc->pmembase,
sc->pmemlimit);
#ifndef PCI_ALLOW_UNSUPPORTED_IO_RANGE
return(NULL);
#endif
}
if (bootverbose)
device_printf(sc->dev, "device %s%d requested decoded memory range 0x%lx-0x%lx\n",
device_get_name(child), device_get_unit(child), start, end);
break;
default:
break;
}
}
/*
* Bridge is OK decoding this resource, so pass it up.
*/
return(bus_generic_alloc_resource(dev, child, type, rid, start, end, count, flags));
}
/*
* PCIB interface.
*/
static int
pcib_maxslots(device_t dev)
{
return(PCI_SLOTMAX);
}
/*
* Since we are a child of a PCI bus, its parent must support the pcib interface.
*/
static u_int32_t
pcib_read_config(device_t dev, int b, int s, int f, int reg, int width)
{
return(PCIB_READ_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, width));
}
static void
pcib_write_config(device_t dev, int b, int s, int f, int reg, u_int32_t val, int width)
{
PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(dev)), b, s, f, reg, val, width);
}
/*
* Route an interrupt across a PCI bridge.
*/
static int
pcib_route_interrupt(device_t pcib, device_t dev, int pin)
{
device_t bus;
int parent_intpin;
int intnum;
/*
*
* The PCI standard defines a swizzle of the child-side device/intpin to
* the parent-side intpin as follows.
*
* device = device on child bus
* child_intpin = intpin on child bus slot (0-3)
* parent_intpin = intpin on parent bus slot (0-3)
*
* parent_intpin = (device + child_intpin) % 4
*/
parent_intpin = (pci_get_slot(pcib) + (pin - 1)) % 4;
/*
* Our parent is a PCI bus. Its parent must export the pcib interface
* which includes the ability to route interrupts.
*/
bus = device_get_parent(pcib);
intnum = PCIB_ROUTE_INTERRUPT(device_get_parent(bus), pcib, parent_intpin + 1);
if (PCI_INTERRUPT_VALID(intnum)) {
device_printf(pcib, "routed slot %d INT%c to irq %d\n", pci_get_slot(dev),
'A' + pin - 1, intnum);
}
return(intnum);
}