freebsd kernel with SKQ
8886f3c63b
r286338: cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The changes in the firmwares since 1.11.27.0 are listed here (straight copy-paste from the "Release Notes.txt" accompanying the Chelsio Unified Wire 2.11.1.0 release on the website). 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential data path hang by properly programming PMTX congestion threshold settings. - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Fixes a regression where SGE resources can be miss-sized if iWARP is disabled. ETH: - Fixes a timing issue that would prevent CR4 links from coming up with some switches. FOFCoE: - Defers fcoe linkdown mailbox command handling till LOGO is sent. - Updates vlan prio for all outstanding IOs during dcbx update. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Enhances segmentation offload to include VxLAN and Geneve. - Adds PTP support. - Adds new interface to allow the driver to query the VI rss table base addresses. - Allows the driver to program the SGE ingrext contxt CongDrop field. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. iSCSI: - Adds support for iscsi segmentatation offload (ISO). - Adds support for iscsi t10-dif offload. FOiSCSI: - Sets FORCE_BIT for cut through processing for FOiSCSI. FOFCoE: - Adds support for FCoE BB6. - Improves WRITE performance. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption - Fixes an issue where 1000Base-X was not enabled correctly when using QSA modules OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOFCoE: - Fixes fcoe xchg leaks in linkdown/peer down path - Fixes cleanup in FCoE linkdown and fixed buf timer flowid abuse - Fixes fw crash by clearing fcf flowc during bye FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ BASE: - Adds support for VFs on PFs 4 to 7 - Adds support for QPs/CQs on any physical and virtual function ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE - Adds support for CR4 links (BEAN/AEC on 40G TwinAx cables) OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software FOISCSI: - Adds IPv6 support for foiscsi. Keeps backward compatibility with old foiscsi drivers which doesn't support ipv6. FOFCoE: - Added fcoe debug support in flowc dump ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Fixes an issue where the link would intermittently fail to come up - Fixes an issue where adapters with an external PHY couldn't run at 100Mbps - Fixes an issue where active optical cables were not recognized - Fixes link advertising issues on T520-BT (speed and pause frames) that would cause the link to negotiate unexpected settings - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested ETH: - Fixes NVGRE Segmentation Offload network header generation. DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------- BASE: - Adds link partner settings reporting when available - Adds QSA support (in conjunction with QSA VPD) - Adds T520-BT LED support - Reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Add support for multiple iSCSI DDP client - Sends DHCP renew request when lease expires ================================================================================ 22.2. T4 Firmware +++++++++++++++++ Version : 1.14.4.0 Date : 08/05/2015 ================================================================================ FIXES ----- BASE: - Fixes a potential initialization error when accessing a configuration file stored on the flash. - Initialize PCIE_DBG_INDIR_REQ.Enable to 0, as hardware failed to do so and register dumps could result in errors. ETH: - Fixes an issue that sometimes prevented the link from coming up in CR adapters. ENHANCEMENTS ------------ BASE: - Adds support for PAUSE OFF watchdog. - Reports devlog access information in PCIE_FW_PF register 7. ETH: - Adds new interface to allow the driver to query the VI rss table base addresses. OFLD: - Adds new interface for the driver to specify offloaded connections TCP snd and rcv scale factors. ================================================================================ ================================================================================ Version : 1.13.32.0 Date : 03/25/2015 ================================================================================ FIXES ----- BASE: - Fixes FW_CAPS_CONFIG_CMD return value on error (was positive instead of negative) - Fixes FW_PARAMS_PARAM_DEV_FLOWC_BUFFIFO_SZ indication (was wrong on certain adapter configurations) - Fixes config file based PL_TIMEOUT register programming ETH: - Fixes a potential EO UDP SEG header corruption OFLD: - Fixes timeout issue with half-open connections - Fixes FW_FLOWC_WR processing when state is set to finwait1 FOiSCSI: - Don't create a new tcp socket if ERL0 attempt has timed out. ENHANCEMENTS ------------ ETH: - Stops sending LACP frames on loopback interface - Adds an AUTOEQU indication to CPL_SGE_EGR_UPDATE OFLD: - Improves default settings of LAN and CLUSTER TCP timer settings - Sends Negative Advice CPLs to software ================================================================================ ================================================================================ Version : 1.12.25.0 Date : 10/22/2014 ================================================================================ FIXES ----- BASE: - Improves precision of the Weight Round Robing Traffic Management Algorithm - Forces link restart when auto-negotiation is disabled - Fix an issue where pause frames wouldn't be fully disabled even if requested DCBX: - Fixes an issue where some settings were not being sent to the switch correctly - Fixes an issue where back-to-back DCBX port updates could get overwritten by FW - Fixes a firmware crash on DCBX APP information request before link up FOiSCSI: - Fixes abort task leak in tmf response handling - Fixes TCP RST handling while in iSCSI ERL0 - Fixes a firmware crash on BYE without INIT ENHANCEMENTS ------------ BASE: - Adds link partner settings reporting when available - Firmware now reports NOTSUPPORTED for modules with an unhandled identifier DCBX: - Adds version reporting (indicating which version FW is trying to negotiate) - Adds IEEE support - Reports LLDP time outs FOiSCSI: - Adds support for multiple iSCSI DDP clients - Sends DHCP renew request when lease expires ================================================================================ Obtained from: Chelsio Communications Sponsored by: Chelsio Communications |
||
---|---|---|
bin | ||
cddl | ||
contrib | ||
crypto | ||
etc | ||
games | ||
gnu | ||
include | ||
kerberos5 | ||
lib | ||
libexec | ||
release | ||
rescue | ||
sbin | ||
secure | ||
share | ||
sys | ||
tests | ||
tools | ||
usr.bin | ||
usr.sbin | ||
COPYRIGHT | ||
LOCKS | ||
MAINTAINERS | ||
Makefile | ||
Makefile.inc1 | ||
ObsoleteFiles.inc | ||
README | ||
UPDATING |
This is the top level of the FreeBSD source directory. This file was last revised on: $FreeBSD$ For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information). The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree, the most commonly used one being ``world'', which rebuilds and installs everything in the FreeBSD system from the source tree except the kernel, the kernel-modules and the contents of /etc. The ``world'' target should only be used in cases where the source tree has not changed from the currently running version. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables. The ``buildkernel'' and ``installkernel'' targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags. Building a kernel is a somewhat more involved process, documentation for which can be found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html And in the config(8) man page. Note: If you want to build and install the kernel with the ``buildkernel'' and ``installkernel'' targets, you might need to build world before. More information is available in the handbook. The sample kernel configuration files reside in the sys/<arch>/conf sub-directory (assuming that you've installed the kernel sources), the file named GENERIC being the one used to build your initial installation kernel. The file NOTES contains entries and documentation for all possible devices, not just those commonly used. It is the successor of the ancient LINT file, but in contrast to LINT, it is not buildable as a kernel but a pure reference and documentation file. Source Roadmap: --------------- bin System/user commands. cddl Various commands and libraries under the Common Development and Distribution License. contrib Packages contributed by 3rd parties. crypto Cryptography stuff (see crypto/README). etc Template files for /etc. games Amusements. gnu Various commands and libraries under the GNU Public License. Please see gnu/COPYING* for more information. include System include files. kerberos5 Kerberos5 (Heimdal) package. lib System libraries. libexec System daemons. release Release building Makefile & associated tools. rescue Build system for statically linked /rescue utilities. sbin System commands. secure Cryptographic libraries and commands. share Shared resources. sys Kernel sources. tools Utilities for regression testing and miscellaneous tasks. usr.bin User commands. usr.sbin System administration commands. For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html