freebsd kernel with SKQ
Go to file
landonf 888843e26a Add basic bwn(4) support for the (BCMA-based) BCM43224 and BCM43225.
- Add the BCM4322X D11 core revision and missing BCM43224 PCI device ID to
  our device tables.
- Disable the DMA engine parity check (rather than adding parity support
  to the to-be-replaced bwn(4) DMA implementation).

Currently, N-PHY support in bwn(4) is GPL licensed, and is not included by
default. Until this is replaced with Broadcom's ISC-licensed N-PHY
implementation, bwn(4) must be rebuilt to enable N-PHY support.

To build bwn(4) with N-PHY support, add the following lines to your kernel
configuration file and rebuild the kernel (and modules):

	options BWN_GPL_PHY

To test bwn(4) with a BCM43224/BCM43225 device, install the firmware from
the net/bwn-firmware-kmod port, and place the following lines in
loader.conf(5):

	hw.bwn_pci.preferred="1"

	if_bwn_pci_load="YES
	bwn_v4_ucode_load="YES"
	bwn_v4_n_ucode_load="YES"
	bwn_v4_lp_ucode_load="YES"

Approved by:	adrian (mentor, implicit)
Sponsored by:	The FreeBSD Foundation
2017-12-14 06:45:04 +00:00
bin Fix mandoc -Tlint warnings in bin/ 2017-12-07 01:57:27 +00:00
cddl Actually add the -x setenv test Makefile, missed in r326499. 2017-12-08 19:26:25 +00:00
contrib Pull in r315334 from upstream lld trunk (by Rafael Espindola): 2017-12-13 19:03:48 +00:00
crypto Merge OpenSSL 1.0.2n. 2017-12-07 18:02:57 +00:00
etc Follow-up to r325967, which removed /etc/casper, by also removing it 2017-12-12 22:21:20 +00:00
gnu build-tools: De-special-case the gcc tools build. 2017-10-31 19:02:05 +00:00
include SPDX: mostly fixes to previous changes. 2017-12-13 16:13:17 +00:00
kerberos5 various: general adoption of SPDX licensing ID tags. 2017-11-27 15:37:16 +00:00
lib SPDX: some uses of the RSA-MD license. 2017-12-13 16:30:39 +00:00
libexec Use strlcpy(). 2017-12-05 07:21:47 +00:00
release Fix the reldoc target in release/Makefile following doc commit r51264. 2017-12-07 20:00:19 +00:00
rescue Avoid referencing private lib names directly. 2017-11-10 07:53:02 +00:00
sbin dhclient(8): Don't shift through the sign bit of a signed int 2017-12-13 20:48:20 +00:00
secure Merge OpenSSL 1.0.2n. 2017-12-07 18:02:57 +00:00
share bhnd(4): Include board_devid in the bhnd_board_info structure, and populate 2017-12-14 01:58:05 +00:00
stand Revert r326792, r326784, r326772, r326712 2017-12-12 22:06:22 +00:00
sys Add basic bwn(4) support for the (BCMA-based) BCM43224 and BCM43225. 2017-12-14 06:45:04 +00:00
targets Disconnect OFED after r326169 broke all DIRDEPS support for it. 2017-12-07 01:49:35 +00:00
tests tests: ipsec: Don't load/unload aesni.ko in the test header 2017-12-03 18:35:07 +00:00
tools netmap pkt-gen tool: Fix memset(3) argument order 2017-12-13 19:36:29 +00:00
usr.bin Replace homemade equivalent of tolower(3) by towlower(3) 2017-12-13 16:09:00 +00:00
usr.sbin SPDX: mostly fixes to previous changes. 2017-12-13 16:13:17 +00:00
.arcconfig callsign isn't required anymore 2016-09-29 06:19:45 +00:00
.arclint arc lint: Explain linting explain 2017-12-09 08:21:29 +00:00
COPYRIGHT Bump copyright year. 2016-12-31 12:41:42 +00:00
LOCKS
MAINTAINERS Move sys/boot to stand. Fix all references to new location 2017-11-14 23:02:19 +00:00
Makefile Import OpenSSL 1.0.2n. 2017-12-07 17:37:15 +00:00
Makefile.inc1 Makefile.inc1: map mips MACHINE_/TARGET_ARCH to triples 2017-12-05 21:42:09 +00:00
Makefile.libcompat Fix nested MAKEOBJDIRPREFIX breaking various release/buildworld/toolchain targets. 2017-11-05 00:11:51 +00:00
Makefile.sys.inc AUTO_OBJ: For all top-level targets enforce using an OBJDIR. 2017-12-05 21:29:47 +00:00
ObsoleteFiles.inc Remove basename_r(3). 2017-12-08 22:06:18 +00:00
README Import OpenSSL 1.0.2n. 2017-12-07 17:37:15 +00:00
README.md Document the sys/boot -> stand move in hier.7 and the top-level README. 2017-12-03 20:36:36 +00:00
UPDATING Fill in date. 2017-11-26 04:55:23 +00:00

FreeBSD Source:

This is the top level of the FreeBSD source directory. This file was last revised on: FreeBSD

For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information).

The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7) and https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables.

The buildkernel and installkernel targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process. See build(7), config(8), and https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html for more information.

Note: If you want to build and install the kernel with the buildkernel and installkernel targets, you might need to build world before. More information is available in the handbook.

The kernel configuration files reside in the sys/<arch>/conf sub-directory. GENERIC is the default configuration used in release builds. NOTES contains entries and documentation for all possible devices, not just those commonly used.

Source Roadmap:

bin				System/user commands.

cddl			Various commands and libraries under the Common Development  
				and Distribution License.

contrib			Packages contributed by 3rd parties.

crypto			Cryptography stuff (see crypto/README).

etc				Template files for /etc.

gnu				Various commands and libraries under the GNU Public License.  
				Please see gnu/COPYING* for more information.

include			System include files.

kerberos5		Kerberos5 (Heimdal) package.

lib				System libraries.

libexec			System daemons.

release			Release building Makefile & associated tools.

rescue			Build system for statically linked /rescue utilities.

sbin			System commands.

secure			Cryptographic libraries and commands.

share			Shared resources.

stand			Boot loader sources.

sys				Kernel sources.

tests			Regression tests which can be run by Kyua.  See tests/README
				for additional information.

tools			Utilities for regression testing and miscellaneous tasks.

usr.bin			User commands.

usr.sbin		System administration commands.

For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see:

https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable.html