freebsd-skq/sys/dev/usb
Andrew Thompson 21a9d6e706 - Support for Globetrotter iCON 452.
- Fixed the interface probe routine to only attach to USB interfaces the driver
  actually supports.  This allows other drivers to attach to things like
  MicroSD slots etc.
- Fixed network interface enumeration to be globally sequential instead of
  relying on the USB interface numbers.  This make sure the first network
  interface always is at uhso0 and the second at usho1 and so on.
- Added a radio kill switch; exposed through sysctl.
- Updated the manual page to be verbose about the number of serial ports and
  include iCON 452 in the set of tested hardware.

Submitted by:	Fredrik Lindberg
2010-07-20 03:10:22 +00:00
..
controller Add support for LOW speed BULK transfers. This mode is not recommended by the 2010-06-22 20:57:48 +00:00
input Add uep(4), driver for USB onscreen touch panel from eGalax. 2010-05-25 21:20:56 +00:00
misc Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
net - Support for Globetrotter iCON 452. 2010-07-20 03:10:22 +00:00
quirk Add a mass storage quirk. 2010-06-22 21:03:13 +00:00
serial Fix comment. 2010-07-13 03:56:29 +00:00
storage Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
template isochronous endpoint descriptors should have two more bytes which are zero by 2010-03-11 21:48:10 +00:00
wlan Use more compact deviceid table. 2010-07-11 23:54:44 +00:00
ufm_ioctl.h
usb_bus.h Add support for USB language selection. 2009-09-28 07:41:17 +00:00
usb_busdma.c Remove overuse of exclamation marks in kernel printfs, there mere fact a 2009-11-26 00:43:17 +00:00
usb_busdma.h
usb_cdc.h The NetBSD Foundation has granted permission to remove clause 3 and 4 from 2010-03-03 10:18:03 +00:00
usb_compat_linux.c Use a more obvious prefix for the USB control (endpoint 0) transfers rather 2010-04-22 22:15:08 +00:00
usb_compat_linux.h - Add usb_fill_bulk_urb() and usb_bulk_msg() linux compat functions [1] 2009-11-01 21:48:18 +00:00
usb_controller.h USB CORE: 2009-07-30 00:14:34 +00:00
usb_core.c
usb_core.h Improve High Speed slot allocation mechanism by moving the computation to the 2009-11-22 21:16:43 +00:00
usb_debug.c Provide tunables for some of the usb sysctls that affect boot behaviour. 2009-11-22 21:21:22 +00:00
usb_debug.h Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
usb_dev.c fix a few cases where a string is passed via format argument instead of 2010-06-11 19:27:21 +00:00
usb_dev.h USB core: 2009-07-30 00:15:50 +00:00
usb_device.c fix a few cases where a string is passed via format argument instead of 2010-06-11 19:27:21 +00:00
usb_device.h If a USB device is suspended and a USB set config request is issued when the 2010-05-12 22:42:35 +00:00
usb_dynamic.c Use the EVENTHANDLER system to hook into the usb device configuration and 2009-12-17 21:42:10 +00:00
usb_dynamic.h Use the EVENTHANDLER system to hook into the usb device configuration and 2009-12-17 21:42:10 +00:00
usb_endian.h
usb_error.c
usb_freebsd.h Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had 2010-04-22 21:31:34 +00:00
usb_generic.c If a USB device is suspended and a USB set config request is issued when the 2010-05-12 22:42:35 +00:00
usb_generic.h
usb_handle_request.c - Patch to allow USB controller to resume operation after 2009-08-24 05:05:38 +00:00
usb_hid.c Support getting signed and unsigned HID data. 2010-05-12 22:50:23 +00:00
usb_hub.c Provide more information about the device location in the USB system. 2010-05-12 22:44:57 +00:00
usb_hub.h Improve High Speed slot allocation mechanism by moving the computation to the 2009-11-22 21:16:43 +00:00
usb_if.m
usb_ioctl.h
usb_lookup.c
usb_mbuf.c
usb_mbuf.h
usb_msctest.c Add support for the E1752 3G modem and the required eject command. 2010-02-14 20:05:12 +00:00
usb_msctest.h Add support for the E1752 3G modem and the required eject command. 2010-02-14 20:05:12 +00:00
usb_parse.c USB core: 2009-07-30 00:15:50 +00:00
usb_pci.h
usb_process.c fix a few cases where a string is passed via format argument instead of 2010-06-11 19:27:21 +00:00
usb_process.h - Patch to allow USB controller to resume operation after 2009-08-24 05:05:38 +00:00
usb_request.c Reduce diffs to p4. 2010-05-12 23:40:44 +00:00
usb_request.h
usb_transfer.c Add support for LOW speed BULK transfers. This mode is not recommended by the 2010-06-22 20:57:48 +00:00
usb_transfer.h Use a more obvious prefix for the USB control (endpoint 0) transfers rather 2010-04-22 22:15:08 +00:00
usb_util.c
usb_util.h
usb.h Add basic support for USB Network Control Model (NCM) v1.0 to if_cdce.c. 2009-09-28 07:53:55 +00:00
usbdevs - Support for Globetrotter iCON 452. 2010-07-20 03:10:22 +00:00
usbdi_util.h
usbdi.h Use the EVENTHANDLER system to hook into the usb device configuration and 2009-12-17 21:42:10 +00:00
usbhid.h Support getting signed and unsigned HID data. 2010-05-12 22:50:23 +00:00