d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
895a22583d
freebsd-skq/sys/dev/e1000/if_em.h
Michal Meloun 63d973c3e9 Use the standard method for localizing of MSI-X table bar. 
Current way, hardcoded value plus heuristic is not conform to the PCI(e)
specification and it fails on systems where MSI-X bar is not initialized by
BIOS/ACPI (many arm or arm64 systems for example).
Instead, use the standard PCI(e) capability for determining of
MSIX table bar address.

MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D27265
2020-12-16 14:39:24 +00:00

564 lines
17 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause
*
* Copyright (c) 2016 Nicole Graziano <nicole@nextbsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*$FreeBSD$*/
#include "opt_ddb.h"
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_rss.h"
#ifdef HAVE_KERNEL_OPTION_HEADERS
#include "opt_device_polling.h"
#endif
#include <sys/param.h>
#include <sys/systm.h>
#ifdef DDB
#include <sys/types.h>
#include <ddb/ddb.h>
#endif
#if __FreeBSD_version >= 800000
#include <sys/buf_ring.h>
#endif
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/smp.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
#include <sys/eventhandler.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/iflib.h>
#ifdef RSS
#include <net/rss_config.h>
#include <netinet/in_rss.h>
#endif
#include <net/if_types.h>
#include <net/if_vlan_var.h>
#include <netinet/in_systm.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <netinet/ip.h>
#include <netinet/ip6.h>
#include <netinet/tcp.h>
#include <netinet/udp.h>
#include <machine/in_cksum.h>
#include <dev/led/led.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include "e1000_api.h"
#include "e1000_82571.h"
#include "ifdi_if.h"
#ifndef _EM_H_DEFINED_
#define _EM_H_DEFINED_
/* Tunables */
/*
* EM_MAX_TXD: Maximum number of Transmit Descriptors
* Valid Range: 80-256 for 82542 and 82543-based adapters
* 80-4096 for others
* Default Value: 1024
* This value is the number of transmit descriptors allocated by the driver.
* Increasing this value allows the driver to queue more transmits. Each
* descriptor is 16 bytes.
* Since TDLEN should be multiple of 128bytes, the number of transmit
* desscriptors should meet the following condition.
* (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0
*/
#define EM_MIN_TXD 128
#define EM_MAX_TXD 4096
#define EM_DEFAULT_TXD 1024
#define EM_DEFAULT_MULTI_TXD 4096
#define IGB_MAX_TXD 4096
/*
* EM_MAX_RXD - Maximum number of receive Descriptors
* Valid Range: 80-256 for 82542 and 82543-based adapters
* 80-4096 for others
* Default Value: 1024
* This value is the number of receive descriptors allocated by the driver.
* Increasing this value allows the driver to buffer more incoming packets.
* Each descriptor is 16 bytes. A receive buffer is also allocated for each
* descriptor. The maximum MTU size is 16110.
* Since TDLEN should be multiple of 128bytes, the number of transmit
* desscriptors should meet the following condition.
* (num_tx_desc * sizeof(struct e1000_tx_desc)) % 128 == 0
*/
#define EM_MIN_RXD 128
#define EM_MAX_RXD 4096
#define EM_DEFAULT_RXD 1024
#define EM_DEFAULT_MULTI_RXD 4096
#define IGB_MAX_RXD 4096
/*
* EM_TIDV - Transmit Interrupt Delay Value
* Valid Range: 0-65535 (0=off)
* Default Value: 64
* This value delays the generation of transmit interrupts in units of
* 1.024 microseconds. Transmit interrupt reduction can improve CPU
* efficiency if properly tuned for specific network traffic. If the
* system is reporting dropped transmits, this value may be set too high
* causing the driver to run out of available transmit descriptors.
*/
#define EM_TIDV 64
/*
* EM_TADV - Transmit Absolute Interrupt Delay Value
* (Not valid for 82542/82543/82544)
* Valid Range: 0-65535 (0=off)
* Default Value: 64
* This value, in units of 1.024 microseconds, limits the delay in which a
* transmit interrupt is generated. Useful only if EM_TIDV is non-zero,
* this value ensures that an interrupt is generated after the initial
* packet is sent on the wire within the set amount of time. Proper tuning,
* along with EM_TIDV, may improve traffic throughput in specific
* network conditions.
*/
#define EM_TADV 64
/*
* EM_RDTR - Receive Interrupt Delay Timer (Packet Timer)
* Valid Range: 0-65535 (0=off)
* Default Value: 0
* This value delays the generation of receive interrupts in units of 1.024
* microseconds. Receive interrupt reduction can improve CPU efficiency if
* properly tuned for specific network traffic. Increasing this value adds
* extra latency to frame reception and can end up decreasing the throughput
* of TCP traffic. If the system is reporting dropped receives, this value
* may be set too high, causing the driver to run out of available receive
* descriptors.
*
* CAUTION: When setting EM_RDTR to a value other than 0, adapters
* may hang (stop transmitting) under certain network conditions.
* If this occurs a WATCHDOG message is logged in the system
* event log. In addition, the controller is automatically reset,
* restoring the network connection. To eliminate the potential
* for the hang ensure that EM_RDTR is set to 0.
*/
#define EM_RDTR 0
/*
* Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544)
* Valid Range: 0-65535 (0=off)
* Default Value: 64
* This value, in units of 1.024 microseconds, limits the delay in which a
* receive interrupt is generated. Useful only if EM_RDTR is non-zero,
* this value ensures that an interrupt is generated after the initial
* packet is received within the set amount of time. Proper tuning,
* along with EM_RDTR, may improve traffic throughput in specific network
* conditions.
*/
#define EM_RADV 64
/*
* This parameter controls whether or not autonegotation is enabled.
* 0 - Disable autonegotiation
* 1 - Enable autonegotiation
*/
#define DO_AUTO_NEG 1
/*
* This parameter control whether or not the driver will wait for
* autonegotiation to complete.
* 1 - Wait for autonegotiation to complete
* 0 - Don't wait for autonegotiation to complete
*/
#define WAIT_FOR_AUTO_NEG_DEFAULT 0
/* Tunables -- End */
#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
ADVERTISE_1000_FULL)
#define AUTO_ALL_MODES 0
/* PHY master/slave setting */
#define EM_MASTER_SLAVE e1000_ms_hw_default
/*
* Micellaneous constants
*/
#define EM_VENDOR_ID 0x8086
#define EM_FLASH 0x0014
#define EM_JUMBO_PBA 0x00000028
#define EM_DEFAULT_PBA 0x00000030
#define EM_SMARTSPEED_DOWNSHIFT 3
#define EM_SMARTSPEED_MAX 15
#define EM_MAX_LOOP 10
#define MAX_NUM_MULTICAST_ADDRESSES 128
#define PCI_ANY_ID (~0U)
#define ETHER_ALIGN 2
#define EM_FC_PAUSE_TIME 0x0680
#define EM_EEPROM_APME 0x400;
#define EM_82544_APME 0x0004;
/* Support AutoMediaDetect for Marvell M88 PHY in i354 */
#define IGB_MEDIA_RESET (1 << 0)
/* Define the starting Interrupt rate per Queue */
#define IGB_INTS_PER_SEC 8000
#define IGB_DEFAULT_ITR ((1000000/IGB_INTS_PER_SEC) << 2)
#define IGB_LINK_ITR 2000
#define I210_LINK_DELAY 1000
#define IGB_TXPBSIZE 20408
#define IGB_HDR_BUF 128
#define IGB_PKTTYPE_MASK 0x0000FFF0
#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */
/*
* Driver state logic for the detection of a hung state
* in hardware. Set TX_HUNG whenever a TX packet is used
* (data is sent) and clear it when txeof() is invoked if
* any descriptors from the ring are cleaned/reclaimed.
* Increment internal counter if no descriptors are cleaned
* and compare to TX_MAXTRIES. When counter > TX_MAXTRIES,
* reset adapter.
*/
#define EM_TX_IDLE 0x00000000
#define EM_TX_BUSY 0x00000001
#define EM_TX_HUNG 0x80000000
#define EM_TX_MAXTRIES 10
#define PCICFG_DESC_RING_STATUS 0xe4
#define FLUSH_DESC_REQUIRED 0x100
#define IGB_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : \
((hw->mac.type <= e1000_82576) ? 16 : 8))
#define IGB_RX_HTHRESH 8
#define IGB_RX_WTHRESH ((hw->mac.type == e1000_82576 && \
(adapter->intr_type == IFLIB_INTR_MSIX)) ? 1 : 4)
#define IGB_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8)
#define IGB_TX_HTHRESH 1
#define IGB_TX_WTHRESH ((hw->mac.type != e1000_82575 && \
(adapter->intr_type == IFLIB_INTR_MSIX) ? 1 : 16)
/*
* TDBA/RDBA should be aligned on 16 byte boundary. But TDLEN/RDLEN should be
* multiple of 128 bytes. So we align TDBA/RDBA on 128 byte boundary. This will
* also optimize cache line size effect. H/W supports up to cache line size 128.
*/
#define EM_DBA_ALIGN 128
/*
* See Intel 82574 Driver Programming Interface Manual, Section 10.2.6.9
*/
#define TARC_COMPENSATION_MODE (1 << 7) /* Compensation Mode */
#define TARC_SPEED_MODE_BIT (1 << 21) /* On PCI-E MACs only */
#define TARC_MQ_FIX (1 << 23) | \
(1 << 24) | \
(1 << 25) /* Handle errata in MQ mode */
#define TARC_ERRATA_BIT (1 << 26) /* Note from errata on 82574 */
/* PCI Config defines */
#define EM_BAR_TYPE(v) ((v) & EM_BAR_TYPE_MASK)
#define EM_BAR_TYPE_MASK 0x00000001
#define EM_BAR_TYPE_MMEM 0x00000000
#define EM_BAR_TYPE_IO 0x00000001
#define EM_BAR_TYPE_FLASH 0x0014
#define EM_BAR_MEM_TYPE(v) ((v) & EM_BAR_MEM_TYPE_MASK)
#define EM_BAR_MEM_TYPE_MASK 0x00000006
#define EM_BAR_MEM_TYPE_32BIT 0x00000000
#define EM_BAR_MEM_TYPE_64BIT 0x00000004
/* More backward compatibility */
#if __FreeBSD_version < 900000
#define SYSCTL_ADD_UQUAD SYSCTL_ADD_QUAD
#endif
/* Defines for printing debug information */
#define DEBUG_INIT 0
#define DEBUG_IOCTL 0
#define DEBUG_HW 0
#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n")
#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A)
#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B)
#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n")
#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A)
#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B)
#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n")
#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A)
#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B)
#define EM_MAX_SCATTER 40
#define EM_VFTA_SIZE 128
#define EM_TSO_SIZE 65535
#define EM_TSO_SEG_SIZE 4096 /* Max dma segment size */
#define EM_MSIX_MASK 0x01F00000 /* For 82574 use */
#define EM_MSIX_LINK 0x01000000 /* For 82574 use */
#define ETH_ZLEN 60
#define EM_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP) /* Offload bits in mbuf flag */
#define IGB_CSUM_OFFLOAD (CSUM_IP | CSUM_IP_UDP | CSUM_IP_TCP | \
CSUM_IP_SCTP | CSUM_IP6_UDP | CSUM_IP6_TCP | \
CSUM_IP6_SCTP) /* Offload bits in mbuf flag */
#define IGB_PKTTYPE_MASK 0x0000FFF0
#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coalesce Flush */
/*
* 82574 has a nonstandard address for EIAC
* and since its only used in MSI-X, and in
* the em driver only 82574 uses MSI-X we can
* solve it just using this define.
*/
#define EM_EIAC 0x000DC
/*
* 82574 only reports 3 MSI-X vectors by default;
* defines assisting with making it report 5 are
* located here.
*/
#define EM_NVM_PCIE_CTRL 0x1B
#define EM_NVM_MSIX_N_MASK (0x7 << EM_NVM_MSIX_N_SHIFT)
#define EM_NVM_MSIX_N_SHIFT 7
struct adapter;
struct em_int_delay_info {
struct adapter *adapter; /* Back-pointer to the adapter struct */
int offset; /* Register offset to read/write */
int value; /* Current value in usecs */
};
/*
* The transmit ring, one per tx queue
*/
struct tx_ring {
struct adapter *adapter;
struct e1000_tx_desc *tx_base;
uint64_t tx_paddr;
qidx_t *tx_rsq;
bool tx_tso; /* last tx was tso */
uint8_t me;
qidx_t tx_rs_cidx;
qidx_t tx_rs_pidx;
qidx_t tx_cidx_processed;
/* Interrupt resources */
void *tag;
struct resource *res;
unsigned long tx_irq;
/* Saved csum offloading context information */
int csum_flags;
int csum_lhlen;
int csum_iphlen;
int csum_thlen;
int csum_mss;
int csum_pktlen;
uint32_t csum_txd_upper;
uint32_t csum_txd_lower; /* last field */
};
/*
* The Receive ring, one per rx queue
*/
struct rx_ring {
struct adapter *adapter;
struct em_rx_queue *que;
u32 me;
u32 payload;
union e1000_rx_desc_extended *rx_base;
uint64_t rx_paddr;
/* Interrupt resources */
void *tag;
struct resource *res;
bool discard;
/* Soft stats */
unsigned long rx_irq;
unsigned long rx_discarded;
unsigned long rx_packets;
unsigned long rx_bytes;
};
struct em_tx_queue {
struct adapter *adapter;
u32 msix;
u32 eims; /* This queue's EIMS bit */
u32 me;
struct tx_ring txr;
};
struct em_rx_queue {
struct adapter *adapter;
u32 me;
u32 msix;
u32 eims;
struct rx_ring rxr;
u64 irqs;
struct if_irq que_irq;
};
/* Our adapter structure */
struct adapter {
struct ifnet *ifp;
struct e1000_hw hw;
if_softc_ctx_t shared;
if_ctx_t ctx;
#define tx_num_queues shared->isc_ntxqsets
#define rx_num_queues shared->isc_nrxqsets
#define intr_type shared->isc_intr
/* FreeBSD operating-system-specific structures. */
struct e1000_osdep osdep;
device_t dev;
struct cdev *led_dev;
struct em_tx_queue *tx_queues;
struct em_rx_queue *rx_queues;
struct if_irq irq;
struct resource *memory;
struct resource *flash;
struct resource *ioport;
struct resource *res;
void *tag;
u32 linkvec;
u32 ivars;
struct ifmedia *media;
int msix;
int if_flags;
int em_insert_vlan_header;
u32 ims;
bool in_detach;
u32 flags;
/* Task for FAST handling */
struct grouptask link_task;
u16 num_vlans;
u32 txd_cmd;
u32 tx_process_limit;
u32 rx_process_limit;
u32 rx_mbuf_sz;
/* Management and WOL features */
u32 wol;
bool has_manage;
bool has_amt;
/* Multicast array memory */
u8 *mta;
/*
** Shadow VFTA table, this is needed because
** the real vlan filter table gets cleared during
** a soft reset and the driver needs to be able
** to repopulate it.
*/
u32 shadow_vfta[EM_VFTA_SIZE];
/* Info about the interface */
u16 link_active;
u16 fc;
u16 link_speed;
u16 link_duplex;
u32 smartspeed;
u32 dmac;
int link_mask;
u64 que_mask;
struct em_int_delay_info tx_int_delay;
struct em_int_delay_info tx_abs_int_delay;
struct em_int_delay_info rx_int_delay;
struct em_int_delay_info rx_abs_int_delay;
struct em_int_delay_info tx_itr;
/* Misc stats maintained by the driver */
unsigned long dropped_pkts;
unsigned long link_irq;
unsigned long rx_overruns;
unsigned long watchdog_events;
struct e1000_hw_stats stats;
u16 vf_ifp;
};
/********************************************************************************
* vendor_info_array
*
* This array contains the list of Subvendor/Subdevice IDs on which the driver
* should load.
*
********************************************************************************/
typedef struct _em_vendor_info_t {
unsigned int vendor_id;
unsigned int device_id;
unsigned int subvendor_id;
unsigned int subdevice_id;
unsigned int index;
} em_vendor_info_t;
void em_dump_rs(struct adapter *);
#define EM_RSSRK_SIZE 4
#define EM_RSSRK_VAL(key, i) (key[(i) * EM_RSSRK_SIZE] | \
key[(i) * EM_RSSRK_SIZE + 1] << 8 | \
key[(i) * EM_RSSRK_SIZE + 2] << 16 | \
key[(i) * EM_RSSRK_SIZE + 3] << 24)
#endif /* _EM_H_DEFINED_ */
Reference in New Issue View Git Blame Copy Permalink