freebsd-skq/sys/dev/syscons/sysmouse.c
emaste 2b75e7bbda Use a common tunable to choose between vt(4)/sc(4)
With this change and previous work from ray@ it will be possible to put
both in GENERIC, and have one enabled by default, but allow the other to
be selected via the loader.

(The previous implementation had separate kern.vt.disable and
hw.syscons.disable tunables, and would panic if both drivers were
compiled in and neither was explicitly disabled.)

MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
2014-06-27 17:50:33 +00:00

254 lines
6.8 KiB
C

/*-
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_syscons.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/priv.h>
#include <sys/serial.h>
#include <sys/tty.h>
#include <sys/ttydefaults.h>
#include <sys/kernel.h>
#include <sys/cons.h>
#include <sys/consio.h>
#include <sys/mouse.h>
#include <dev/syscons/syscons.h>
#ifndef SC_NO_SYSMOUSE
/* local variables */
static struct tty *sysmouse_tty;
static int mouse_level; /* sysmouse protocol level */
static mousestatus_t mouse_status;
static void
smdev_close(struct tty *tp)
{
mouse_level = 0;
}
static int
smdev_ioctl(struct tty *tp, u_long cmd, caddr_t data, struct thread *td)
{
mousehw_t *hw;
mousemode_t *mode;
switch (cmd) {
case MOUSE_GETHWINFO: /* get device information */
hw = (mousehw_t *)data;
hw->buttons = 10; /* XXX unknown */
hw->iftype = MOUSE_IF_SYSMOUSE;
hw->type = MOUSE_MOUSE;
hw->model = MOUSE_MODEL_GENERIC;
hw->hwid = 0;
return 0;
case MOUSE_GETMODE: /* get protocol/mode */
mode = (mousemode_t *)data;
mode->level = mouse_level;
switch (mode->level) {
case 0: /* emulate MouseSystems protocol */
mode->protocol = MOUSE_PROTO_MSC;
mode->rate = -1; /* unknown */
mode->resolution = -1; /* unknown */
mode->accelfactor = 0; /* disabled */
mode->packetsize = MOUSE_MSC_PACKETSIZE;
mode->syncmask[0] = MOUSE_MSC_SYNCMASK;
mode->syncmask[1] = MOUSE_MSC_SYNC;
break;
case 1: /* sysmouse protocol */
mode->protocol = MOUSE_PROTO_SYSMOUSE;
mode->rate = -1;
mode->resolution = -1;
mode->accelfactor = 0;
mode->packetsize = MOUSE_SYS_PACKETSIZE;
mode->syncmask[0] = MOUSE_SYS_SYNCMASK;
mode->syncmask[1] = MOUSE_SYS_SYNC;
break;
}
return 0;
case MOUSE_SETMODE: /* set protocol/mode */
mode = (mousemode_t *)data;
if (mode->level == -1)
; /* don't change the current setting */
else if ((mode->level < 0) || (mode->level > 1))
return EINVAL;
else
mouse_level = mode->level;
return 0;
case MOUSE_GETLEVEL: /* get operation level */
*(int *)data = mouse_level;
return 0;
case MOUSE_SETLEVEL: /* set operation level */
if ((*(int *)data < 0) || (*(int *)data > 1))
return EINVAL;
mouse_level = *(int *)data;
return 0;
case MOUSE_GETSTATUS: /* get accumulated mouse events */
*(mousestatus_t *)data = mouse_status;
mouse_status.flags = 0;
mouse_status.obutton = mouse_status.button;
mouse_status.dx = 0;
mouse_status.dy = 0;
mouse_status.dz = 0;
return 0;
#ifdef notyet
case MOUSE_GETVARS: /* get internal mouse variables */
case MOUSE_SETVARS: /* set internal mouse variables */
return ENODEV;
#endif
case MOUSE_READSTATE: /* read status from the device */
case MOUSE_READDATA: /* read data from the device */
return ENODEV;
}
return (ENOIOCTL);
}
static int
smdev_param(struct tty *tp, struct termios *t)
{
/*
* Set the output baud rate to zero. The mouse device supports
* no output, so we don't want to waste buffers.
*/
t->c_ispeed = TTYDEF_SPEED;
t->c_ospeed = B0;
return (0);
}
static struct ttydevsw smdev_ttydevsw = {
.tsw_flags = TF_NOPREFIX,
.tsw_close = smdev_close,
.tsw_ioctl = smdev_ioctl,
.tsw_param = smdev_param,
};
static void
sm_attach_mouse(void *unused)
{
if (!vty_enabled(VTY_SC))
return;
sysmouse_tty = tty_alloc(&smdev_ttydevsw, NULL);
tty_makedev(sysmouse_tty, NULL, "sysmouse");
}
SYSINIT(sysmouse, SI_SUB_DRIVERS, SI_ORDER_MIDDLE, sm_attach_mouse, NULL);
int
sysmouse_event(mouse_info_t *info)
{
/* MOUSE_BUTTON?DOWN -> MOUSE_MSC_BUTTON?UP */
static int butmap[8] = {
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON2UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON3UP,
MOUSE_MSC_BUTTON1UP | MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON2UP,
MOUSE_MSC_BUTTON1UP,
0,
};
u_char buf[8];
int x, y, z;
int i, flags = 0;
tty_lock(sysmouse_tty);
switch (info->operation) {
case MOUSE_ACTION:
mouse_status.button = info->u.data.buttons;
/* FALL THROUGH */
case MOUSE_MOTION_EVENT:
x = info->u.data.x;
y = info->u.data.y;
z = info->u.data.z;
break;
case MOUSE_BUTTON_EVENT:
x = y = z = 0;
if (info->u.event.value > 0)
mouse_status.button |= info->u.event.id;
else
mouse_status.button &= ~info->u.event.id;
break;
default:
goto done;
}
mouse_status.dx += x;
mouse_status.dy += y;
mouse_status.dz += z;
mouse_status.flags |= ((x || y || z) ? MOUSE_POSCHANGED : 0)
| (mouse_status.obutton ^ mouse_status.button);
flags = mouse_status.flags;
if (flags == 0 || !tty_opened(sysmouse_tty))
goto done;
/* the first five bytes are compatible with MouseSystems' */
buf[0] = MOUSE_MSC_SYNC
| butmap[mouse_status.button & MOUSE_STDBUTTONS];
x = imax(imin(x, 255), -256);
buf[1] = x >> 1;
buf[3] = x - buf[1];
y = -imax(imin(y, 255), -256);
buf[2] = y >> 1;
buf[4] = y - buf[2];
for (i = 0; i < MOUSE_MSC_PACKETSIZE; ++i)
ttydisc_rint(sysmouse_tty, buf[i], 0);
if (mouse_level >= 1) {
/* extended part */
z = imax(imin(z, 127), -128);
buf[5] = (z >> 1) & 0x7f;
buf[6] = (z - (z >> 1)) & 0x7f;
/* buttons 4-10 */
buf[7] = (~mouse_status.button >> 3) & 0x7f;
for (i = MOUSE_MSC_PACKETSIZE; i < MOUSE_SYS_PACKETSIZE; ++i)
ttydisc_rint(sysmouse_tty, buf[i], 0);
}
ttydisc_rint_done(sysmouse_tty);
done: tty_unlock(sysmouse_tty);
return (flags);
}
#endif /* !SC_NO_SYSMOUSE */