freebsd-skq/sys/dev/ppc/ppcreg.h
jhb 03f7a1b892 Several cleanups to remove the need for explicit unit numbers and a few
other fixes:
- Add pointers back to device_t objects in softc structures instead
  of storing the unit and using devclass_get_device().
- Add 'lpbb', 'pcf', 'pps', and 'vpo' child devices to every 'ppbus' device
  instead of just the first one.
- Store softc pointers in si_drv1 of character devices instead of
  pulling the unit number from the minor number and using
  devclass_get_softc() and devclass_get_device().
- Store the LP_BYPASS flag in si_drv2 instead of encoding it in the minor
  number.
- Destroy character devices for lpt(4) when detaching the device.
- Use bus_print_child_footer() instead of duplicating it in
  ppbus_print_child() and fix ppbus_print_child()'s return value.
- Remove unused AVM ivar from ppbus.
- Don't store the 'mode' ivar in the ppbus ivars since we always fetch it
  from the parent anyway.
- Try to detach all the child devices before deleting them in
  ppbus_detach().
- Use pause() instead of a tsleep() on a dummy address when polling the
  ppbus.
- Use if_printf() and device_printf() instead of explicit names with unit
  numbers.

Silence on:	current@
2008-10-21 18:30:10 +00:00

279 lines
8.5 KiB
C

/*-
* Copyright (c) 2001 Alcove - Nicolas Souchu
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#ifndef __PPCREG_H
#define __PPCREG_H
/*
* Parallel Port Chipset type.
*/
#define SMC_LIKE 0
#define SMC_37C665GT 1
#define SMC_37C666GT 2
#define NS_PC87332 3
#define NS_PC87306 4
#define INTEL_820191AA 5 /* XXX not implemented */
#define GENERIC 6
#define WINB_W83877F 7
#define WINB_W83877AF 8
#define WINB_UNKNOWN 9
#define NS_PC87334 10
#define SMC_37C935 11
#define NS_PC87303 12
/*
* Parallel Port Chipset Type. SMC versus GENERIC (others)
*/
#define PPC_TYPE_SMCLIKE 0
#define PPC_TYPE_GENERIC 1
/*
* Generic structure to hold parallel port chipset info.
*/
struct ppc_data {
device_t ppc_dev;
int ppc_model; /* chipset model if detected */
int ppc_type; /* generic or smclike chipset type */
int ppc_mode; /* chipset current mode */
int ppc_avm; /* chipset available modes */
int ppc_dtm; /* chipset detected modes */
#define PPC_IRQ_NONE 0x0
#define PPC_IRQ_nACK 0x1
#define PPC_IRQ_DMA 0x2
#define PPC_IRQ_FIFO 0x4
#define PPC_IRQ_nFAULT 0x8
int ppc_irqstat; /* remind irq settings */
#define PPC_DMA_INIT 0x01
#define PPC_DMA_STARTED 0x02
#define PPC_DMA_COMPLETE 0x03
#define PPC_DMA_INTERRUPTED 0x04
#define PPC_DMA_ERROR 0x05
int ppc_dmastat; /* dma state */
int ppc_dmachan; /* dma channel */
int ppc_dmaflags; /* dma transfer flags */
caddr_t ppc_dmaddr; /* buffer address */
u_int ppc_dmacnt; /* count of bytes sent with dma */
void (*ppc_dmadone)(struct ppc_data*);
#define PPC_PWORD_MASK 0x30
#define PPC_PWORD_16 0x00
#define PPC_PWORD_8 0x10
#define PPC_PWORD_32 0x20
char ppc_pword; /* PWord size */
short ppc_fifo; /* FIFO threshold */
short ppc_wthr; /* writeIntrThresold */
short ppc_rthr; /* readIntrThresold */
char *ppc_ptr; /* microseq current pointer */
int ppc_accum; /* microseq accumulator */
int ppc_base; /* parallel port base address */
int ppc_epp; /* EPP mode (1.7 or 1.9) */
int ppc_irq;
unsigned char ppc_flags;
device_t ppbus; /* parallel port chipset corresponding ppbus */
int rid_irq, rid_drq, rid_ioport;
struct resource *res_irq, *res_drq, *res_ioport;
void *intr_cookie;
struct intr_event *ppc_intr_event;
int ppc_child_handlers;
};
/*
* Parallel Port Chipset registers.
*/
#define PPC_SPP_DTR 0 /* SPP data register */
#define PPC_ECP_A_FIFO 0 /* ECP Address fifo register */
#define PPC_SPP_STR 1 /* SPP status register */
#define PPC_SPP_CTR 2 /* SPP control register */
#define PPC_EPP_ADDR 3 /* EPP address register (8 bit) */
#define PPC_EPP_DATA 4 /* EPP data register (8, 16 or 32 bit) */
#if defined(__i386__) && defined(PC98)
#define PPC_1284_ENABLE 0x09 /* IEEE STD 1284 Enable register */
#define PPC_ECP_D_FIFO 0x0c /* ECP Data fifo register */
#define PPC_ECP_CNFGA 0x0c /* Configuration register A */
#define PPC_ECP_CNFGB 0x0d /* Configuration register B */
#define PPC_ECP_ECR 0x0e /* ECP extended control register */
#else
#define PPC_ECP_D_FIFO 0x400 /* ECP Data fifo register */
#define PPC_ECP_CNFGA 0x400 /* Configuration register A */
#define PPC_ECP_CNFGB 0x401 /* Configuration register B */
#define PPC_ECP_ECR 0x402 /* ECP extended control register */
#endif
#define PPC_FIFO_EMPTY 0x1 /* ecr register - bit 0 */
#define PPC_FIFO_FULL 0x2 /* ecr register - bit 1 */
#define PPC_SERVICE_INTR 0x4 /* ecr register - bit 2 */
#define PPC_ENABLE_DMA 0x8 /* ecr register - bit 3 */
#define PPC_nFAULT_INTR 0x10 /* ecr register - bit 4 */
#define PPC_ECR_STD 0x0
#define PPC_ECR_PS2 0x20
#define PPC_ECR_FIFO 0x40
#define PPC_ECR_ECP 0x60
#define PPC_ECR_EPP 0x80
#define PPC_DISABLE_INTR (PPC_SERVICE_INTR | PPC_nFAULT_INTR)
#define PPC_ECR_RESET (PPC_ECR_PS2 | PPC_DISABLE_INTR)
#define r_dtr(ppc) (bus_read_1((ppc)->res_ioport, PPC_SPP_DTR))
#define r_str(ppc) (bus_read_1((ppc)->res_ioport, PPC_SPP_STR))
#define r_ctr(ppc) (bus_read_1((ppc)->res_ioport, PPC_SPP_CTR))
#define r_epp_A(ppc) (bus_read_1((ppc)->res_ioport, PPC_EPP_ADDR))
#define r_epp_D(ppc) (bus_read_1((ppc)->res_ioport, PPC_EPP_DATA))
#define r_cnfgA(ppc) (bus_read_1((ppc)->res_ioport, PPC_ECP_CNFGA))
#define r_cnfgB(ppc) (bus_read_1((ppc)->res_ioport, PPC_ECP_CNFGB))
#define r_ecr(ppc) (bus_read_1((ppc)->res_ioport, PPC_ECP_ECR))
#define r_fifo(ppc) (bus_read_1((ppc)->res_ioport, PPC_ECP_D_FIFO))
#define w_dtr(ppc, byte) (bus_write_1((ppc)->res_ioport, PPC_SPP_DTR, byte))
#define w_str(ppc, byte) (bus_write_1((ppc)->res_ioport, PPC_SPP_STR, byte))
#define w_ctr(ppc, byte) (bus_write_1((ppc)->res_ioport, PPC_SPP_CTR, byte))
#define w_epp_A(ppc, byte) (bus_write_1((ppc)->res_ioport, PPC_EPP_ADDR, byte))
#define w_epp_D(ppc, byte) (bus_write_1((ppc)->res_ioport, PPC_EPP_DATA, byte))
#define w_ecr(ppc, byte) (bus_write_1((ppc)->res_ioport, PPC_ECP_ECR, byte))
#define w_fifo(ppc, byte) (bus_write_1((ppc)->res_ioport, PPC_ECP_D_FIFO, byte))
/*
* Register defines for the PC873xx parts
*/
#define PC873_FER 0x00
#define PC873_PPENABLE (1<<0)
#define PC873_FAR 0x01
#define PC873_PTR 0x02
#define PC873_CFGLOCK (1<<6)
#define PC873_EPPRDIR (1<<7)
#define PC873_EXTENDED (1<<7)
#define PC873_LPTBIRQ7 (1<<3)
#define PC873_FCR 0x03
#define PC873_ZWS (1<<5)
#define PC873_ZWSPWDN (1<<6)
#define PC873_PCR 0x04
#define PC873_EPPEN (1<<0)
#define PC873_EPP19 (1<<1)
#define PC873_ECPEN (1<<2)
#define PC873_ECPCLK (1<<3)
#define PC873_PMC 0x06
#define PC873_TUP 0x07
#define PC873_SID 0x08
#define PC873_PNP0 0x1b
#define PC873_PNP1 0x1c
#define PC873_LPTBA 0x19
/*
* Register defines for the SMC FDC37C66xGT parts
*/
/* Init codes */
#define SMC665_iCODE 0x55
#define SMC666_iCODE 0x44
/* Base configuration ports */
#define SMC66x_CSR 0x3F0
#define SMC666_CSR 0x370 /* hard-configured value for 666 */
/* Bits */
#define SMC_CR1_ADDR 0x3 /* bit 0 and 1 */
#define SMC_CR1_MODE (1<<3) /* bit 3 */
#define SMC_CR4_EMODE 0x3 /* bits 0 and 1 */
#define SMC_CR4_EPPTYPE (1<<6) /* bit 6 */
/* Extended modes */
#define SMC_SPP 0x0 /* SPP */
#define SMC_EPPSPP 0x1 /* EPP and SPP */
#define SMC_ECP 0x2 /* ECP */
#define SMC_ECPEPP 0x3 /* ECP and EPP */
/*
* Register defines for the SMC FDC37C935 parts
*/
/* Configuration ports */
#define SMC935_CFG 0x370
#define SMC935_IND 0x370
#define SMC935_DAT 0x371
/* Registers */
#define SMC935_LOGDEV 0x7
#define SMC935_ID 0x20
#define SMC935_PORTHI 0x60
#define SMC935_PORTLO 0x61
#define SMC935_PPMODE 0xf0
/* Parallel port modes */
#define SMC935_SPP 0x38 + 0
#define SMC935_EPP19SPP 0x38 + 1
#define SMC935_ECP 0x38 + 2
#define SMC935_ECPEPP19 0x38 + 3
#define SMC935_CENT 0x38 + 4
#define SMC935_EPP17SPP 0x38 + 5
#define SMC935_UNUSED 0x38 + 6
#define SMC935_ECPEPP17 0x38 + 7
/*
* Register defines for the Winbond W83877F parts
*/
#define WINB_W83877F_ID 0xa
#define WINB_W83877AF_ID 0xb
/* Configuration bits */
#define WINB_HEFERE (1<<5) /* CROC bit 5 */
#define WINB_HEFRAS (1<<0) /* CR16 bit 0 */
#define WINB_PNPCVS (1<<2) /* CR16 bit 2 */
#define WINB_CHIPID 0xf /* CR9 bits 0-3 */
#define WINB_PRTMODS0 (1<<2) /* CR0 bit 2 */
#define WINB_PRTMODS1 (1<<3) /* CR0 bit 3 */
#define WINB_PRTMODS2 (1<<7) /* CR9 bit 7 */
/* W83877F modes: CR9/bit7 | CR0/bit3 | CR0/bit2 */
#define WINB_W83757 0x0
#define WINB_EXTFDC 0x4
#define WINB_EXTADP 0x8
#define WINB_EXT2FDD 0xc
#define WINB_JOYSTICK 0x80
#define WINB_PARALLEL 0x80
#define WINB_EPP_SPP 0x4
#define WINB_ECP 0x8
#define WINB_ECP_EPP 0xc
#endif