618c7db30a
dump using mechanically generated/extracted debugging output rather than a simple memory dump. Current sources of debugging output are: - DDB output capture buffer, if there is captured output to save - Kernel message buffer - Kernel configuration, if included in kernel - Kernel version string - Panic message Textdumps are stored in swap/dump partitions as with regular dumps, but are laid out as ustar files in order to allow multiple parts to be stored as a stream of sequentially written blocks. Blocks are written out in reverse order, as the size of a textdump isn't known a priori. As with regular dumps, they will be extracted using savecore(8). One new DDB(4) command is added, "textdump", which accepts "set", "unset", and "status" arguments. By default, normal kernel dumps are generated unless "textdump set" is run in order to schedule a textdump. It can be canceled using "textdump unset" to restore generation of a normal kernel dump. Several sysctls exist to configure aspects of textdumps; debug.ddb.textdump.pending can be set to check whether a textdump is pending, or set/unset in order to control whether the next kernel dump will be a textdump from userspace. While textdumps don't have to be generated as a result of a DDB script run automatically as part of a kernel panic, this is a particular useful way to use them, as instead of generating a complete memory dump, a simple transcript of an automated DDB session can be captured using the DDB output capture and textdump facilities. This can be used to generate quite brief kernel bug reports rich in debugging information but not dependent on kernel symbol tables or precisely synchronized source code. Most textdumps I generate are less than 100k including the full message buffer. Using textdumps with an interactive debugging session is also useful, with capture being enabled/disabled in order to record some but not all of the DDB session. MFC after: 3 months
672 lines
16 KiB
C
672 lines
16 KiB
C
/*-
|
|
* Copyright (c) 1986, 1988, 1991, 1993
|
|
* The Regents of the University of California. All rights reserved.
|
|
* (c) UNIX System Laboratories, Inc.
|
|
* All or some portions of this file are derived from material licensed
|
|
* to the University of California by American Telephone and Telegraph
|
|
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
|
|
* the permission of UNIX System Laboratories, Inc.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)kern_shutdown.c 8.3 (Berkeley) 1/21/94
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ddb.h"
|
|
#include "opt_kdb.h"
|
|
#include "opt_mac.h"
|
|
#include "opt_panic.h"
|
|
#include "opt_show_busybufs.h"
|
|
#include "opt_sched.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mount.h>
|
|
#include <sys/priv.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/reboot.h>
|
|
#include <sys/resourcevar.h>
|
|
#include <sys/sched.h>
|
|
#include <sys/smp.h> /* smp_active */
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sysproto.h>
|
|
|
|
#include <ddb/ddb.h>
|
|
|
|
#include <machine/cpu.h>
|
|
#include <machine/pcb.h>
|
|
#include <machine/smp.h>
|
|
|
|
#include <security/mac/mac_framework.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/vm_object.h>
|
|
#include <vm/vm_page.h>
|
|
#include <vm/vm_pager.h>
|
|
#include <vm/swap_pager.h>
|
|
|
|
#include <sys/signalvar.h>
|
|
|
|
#ifndef PANIC_REBOOT_WAIT_TIME
|
|
#define PANIC_REBOOT_WAIT_TIME 15 /* default to 15 seconds */
|
|
#endif
|
|
|
|
/*
|
|
* Note that stdarg.h and the ANSI style va_start macro is used for both
|
|
* ANSI and traditional C compilers.
|
|
*/
|
|
#include <machine/stdarg.h>
|
|
|
|
#ifdef KDB
|
|
#ifdef KDB_UNATTENDED
|
|
int debugger_on_panic = 0;
|
|
#else
|
|
int debugger_on_panic = 1;
|
|
#endif
|
|
SYSCTL_INT(_debug, OID_AUTO, debugger_on_panic, CTLFLAG_RW,
|
|
&debugger_on_panic, 0, "Run debugger on kernel panic");
|
|
|
|
#ifdef KDB_TRACE
|
|
int trace_on_panic = 1;
|
|
#else
|
|
int trace_on_panic = 0;
|
|
#endif
|
|
SYSCTL_INT(_debug, OID_AUTO, trace_on_panic, CTLFLAG_RW,
|
|
&trace_on_panic, 0, "Print stack trace on kernel panic");
|
|
#endif /* KDB */
|
|
|
|
int sync_on_panic = 0;
|
|
SYSCTL_INT(_kern, OID_AUTO, sync_on_panic, CTLFLAG_RW,
|
|
&sync_on_panic, 0, "Do a sync before rebooting from a panic");
|
|
|
|
SYSCTL_NODE(_kern, OID_AUTO, shutdown, CTLFLAG_RW, 0, "Shutdown environment");
|
|
|
|
/*
|
|
* Variable panicstr contains argument to first call to panic; used as flag
|
|
* to indicate that the kernel has already called panic.
|
|
*/
|
|
const char *panicstr;
|
|
|
|
int dumping; /* system is dumping */
|
|
int rebooting; /* system is rebooting */
|
|
static struct dumperinfo dumper; /* our selected dumper */
|
|
|
|
/* Context information for dump-debuggers. */
|
|
static struct pcb dumppcb; /* Registers. */
|
|
static lwpid_t dumptid; /* Thread ID. */
|
|
|
|
static void boot(int) __dead2;
|
|
static void poweroff_wait(void *, int);
|
|
static void shutdown_halt(void *junk, int howto);
|
|
static void shutdown_panic(void *junk, int howto);
|
|
static void shutdown_reset(void *junk, int howto);
|
|
|
|
/* register various local shutdown events */
|
|
static void
|
|
shutdown_conf(void *unused)
|
|
{
|
|
|
|
EVENTHANDLER_REGISTER(shutdown_final, poweroff_wait, NULL,
|
|
SHUTDOWN_PRI_FIRST);
|
|
EVENTHANDLER_REGISTER(shutdown_final, shutdown_halt, NULL,
|
|
SHUTDOWN_PRI_LAST + 100);
|
|
EVENTHANDLER_REGISTER(shutdown_final, shutdown_panic, NULL,
|
|
SHUTDOWN_PRI_LAST + 100);
|
|
EVENTHANDLER_REGISTER(shutdown_final, shutdown_reset, NULL,
|
|
SHUTDOWN_PRI_LAST + 200);
|
|
}
|
|
|
|
SYSINIT(shutdown_conf, SI_SUB_INTRINSIC, SI_ORDER_ANY, shutdown_conf, NULL)
|
|
|
|
/*
|
|
* The system call that results in a reboot.
|
|
*/
|
|
/* ARGSUSED */
|
|
int
|
|
reboot(struct thread *td, struct reboot_args *uap)
|
|
{
|
|
int error;
|
|
|
|
error = 0;
|
|
#ifdef MAC
|
|
error = mac_system_check_reboot(td->td_ucred, uap->opt);
|
|
#endif
|
|
if (error == 0)
|
|
error = priv_check(td, PRIV_REBOOT);
|
|
if (error == 0) {
|
|
mtx_lock(&Giant);
|
|
boot(uap->opt);
|
|
mtx_unlock(&Giant);
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Called by events that want to shut down.. e.g <CTL><ALT><DEL> on a PC
|
|
*/
|
|
static int shutdown_howto = 0;
|
|
|
|
void
|
|
shutdown_nice(int howto)
|
|
{
|
|
|
|
shutdown_howto = howto;
|
|
|
|
/* Send a signal to init(8) and have it shutdown the world */
|
|
if (initproc != NULL) {
|
|
PROC_LOCK(initproc);
|
|
psignal(initproc, SIGINT);
|
|
PROC_UNLOCK(initproc);
|
|
} else {
|
|
/* No init(8) running, so simply reboot */
|
|
boot(RB_NOSYNC);
|
|
}
|
|
return;
|
|
}
|
|
static int waittime = -1;
|
|
|
|
static void
|
|
print_uptime(void)
|
|
{
|
|
int f;
|
|
struct timespec ts;
|
|
|
|
getnanouptime(&ts);
|
|
printf("Uptime: ");
|
|
f = 0;
|
|
if (ts.tv_sec >= 86400) {
|
|
printf("%ldd", (long)ts.tv_sec / 86400);
|
|
ts.tv_sec %= 86400;
|
|
f = 1;
|
|
}
|
|
if (f || ts.tv_sec >= 3600) {
|
|
printf("%ldh", (long)ts.tv_sec / 3600);
|
|
ts.tv_sec %= 3600;
|
|
f = 1;
|
|
}
|
|
if (f || ts.tv_sec >= 60) {
|
|
printf("%ldm", (long)ts.tv_sec / 60);
|
|
ts.tv_sec %= 60;
|
|
f = 1;
|
|
}
|
|
printf("%lds\n", (long)ts.tv_sec);
|
|
}
|
|
|
|
static void
|
|
doadump(void)
|
|
{
|
|
|
|
/*
|
|
* Sometimes people have to call this from the kernel debugger.
|
|
* (if 'panic' can not dump)
|
|
* Give them a clue as to why they can't dump.
|
|
*/
|
|
if (dumper.dumper == NULL) {
|
|
printf("Cannot dump. No dump device defined.\n");
|
|
return;
|
|
}
|
|
|
|
savectx(&dumppcb);
|
|
dumptid = curthread->td_tid;
|
|
dumping++;
|
|
#ifdef DDB
|
|
if (textdump_pending)
|
|
textdump_dumpsys(&dumper);
|
|
else
|
|
#endif
|
|
dumpsys(&dumper);
|
|
}
|
|
|
|
static int
|
|
isbufbusy(struct buf *bp)
|
|
{
|
|
if (((bp->b_flags & (B_INVAL | B_PERSISTENT)) == 0 &&
|
|
BUF_REFCNT(bp) > 0) ||
|
|
((bp->b_flags & (B_DELWRI | B_INVAL)) == B_DELWRI))
|
|
return (1);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Shutdown the system cleanly to prepare for reboot, halt, or power off.
|
|
*/
|
|
static void
|
|
boot(int howto)
|
|
{
|
|
static int first_buf_printf = 1;
|
|
|
|
#if defined(SMP)
|
|
/*
|
|
* Bind us to CPU 0 so that all shutdown code runs there. Some
|
|
* systems don't shutdown properly (i.e., ACPI power off) if we
|
|
* run on another processor.
|
|
*/
|
|
thread_lock(curthread);
|
|
sched_bind(curthread, 0);
|
|
thread_unlock(curthread);
|
|
KASSERT(PCPU_GET(cpuid) == 0, ("boot: not running on cpu 0"));
|
|
#endif
|
|
/* We're in the process of rebooting. */
|
|
rebooting = 1;
|
|
|
|
/* collect extra flags that shutdown_nice might have set */
|
|
howto |= shutdown_howto;
|
|
|
|
/* We are out of the debugger now. */
|
|
kdb_active = 0;
|
|
|
|
/*
|
|
* Do any callouts that should be done BEFORE syncing the filesystems.
|
|
*/
|
|
EVENTHANDLER_INVOKE(shutdown_pre_sync, howto);
|
|
|
|
/*
|
|
* Now sync filesystems
|
|
*/
|
|
if (!cold && (howto & RB_NOSYNC) == 0 && waittime < 0) {
|
|
register struct buf *bp;
|
|
int iter, nbusy, pbusy;
|
|
#ifndef PREEMPTION
|
|
int subiter;
|
|
#endif
|
|
|
|
waittime = 0;
|
|
|
|
sync(curthread, NULL);
|
|
|
|
/*
|
|
* With soft updates, some buffers that are
|
|
* written will be remarked as dirty until other
|
|
* buffers are written.
|
|
*/
|
|
for (iter = pbusy = 0; iter < 20; iter++) {
|
|
nbusy = 0;
|
|
for (bp = &buf[nbuf]; --bp >= buf; )
|
|
if (isbufbusy(bp))
|
|
nbusy++;
|
|
if (nbusy == 0) {
|
|
if (first_buf_printf)
|
|
printf("All buffers synced.");
|
|
break;
|
|
}
|
|
if (first_buf_printf) {
|
|
printf("Syncing disks, buffers remaining... ");
|
|
first_buf_printf = 0;
|
|
}
|
|
printf("%d ", nbusy);
|
|
if (nbusy < pbusy)
|
|
iter = 0;
|
|
pbusy = nbusy;
|
|
sync(curthread, NULL);
|
|
|
|
#ifdef PREEMPTION
|
|
/*
|
|
* Drop Giant and spin for a while to allow
|
|
* interrupt threads to run.
|
|
*/
|
|
DROP_GIANT();
|
|
DELAY(50000 * iter);
|
|
PICKUP_GIANT();
|
|
#else
|
|
/*
|
|
* Drop Giant and context switch several times to
|
|
* allow interrupt threads to run.
|
|
*/
|
|
DROP_GIANT();
|
|
for (subiter = 0; subiter < 50 * iter; subiter++) {
|
|
thread_lock(curthread);
|
|
mi_switch(SW_VOL, NULL);
|
|
thread_unlock(curthread);
|
|
DELAY(1000);
|
|
}
|
|
PICKUP_GIANT();
|
|
#endif
|
|
}
|
|
printf("\n");
|
|
/*
|
|
* Count only busy local buffers to prevent forcing
|
|
* a fsck if we're just a client of a wedged NFS server
|
|
*/
|
|
nbusy = 0;
|
|
for (bp = &buf[nbuf]; --bp >= buf; ) {
|
|
if (isbufbusy(bp)) {
|
|
#if 0
|
|
/* XXX: This is bogus. We should probably have a BO_REMOTE flag instead */
|
|
if (bp->b_dev == NULL) {
|
|
TAILQ_REMOVE(&mountlist,
|
|
bp->b_vp->v_mount, mnt_list);
|
|
continue;
|
|
}
|
|
#endif
|
|
nbusy++;
|
|
#if defined(SHOW_BUSYBUFS) || defined(DIAGNOSTIC)
|
|
printf(
|
|
"%d: bufobj:%p, flags:%0x, blkno:%ld, lblkno:%ld\n",
|
|
nbusy, bp->b_bufobj,
|
|
bp->b_flags, (long)bp->b_blkno,
|
|
(long)bp->b_lblkno);
|
|
#endif
|
|
}
|
|
}
|
|
if (nbusy) {
|
|
/*
|
|
* Failed to sync all blocks. Indicate this and don't
|
|
* unmount filesystems (thus forcing an fsck on reboot).
|
|
*/
|
|
printf("Giving up on %d buffers\n", nbusy);
|
|
DELAY(5000000); /* 5 seconds */
|
|
} else {
|
|
if (!first_buf_printf)
|
|
printf("Final sync complete\n");
|
|
/*
|
|
* Unmount filesystems
|
|
*/
|
|
if (panicstr == 0)
|
|
vfs_unmountall();
|
|
}
|
|
swapoff_all();
|
|
DELAY(100000); /* wait for console output to finish */
|
|
}
|
|
|
|
print_uptime();
|
|
|
|
/*
|
|
* Ok, now do things that assume all filesystem activity has
|
|
* been completed.
|
|
*/
|
|
EVENTHANDLER_INVOKE(shutdown_post_sync, howto);
|
|
|
|
/* XXX This doesn't disable interrupts any more. Reconsider? */
|
|
splhigh();
|
|
|
|
if ((howto & (RB_HALT|RB_DUMP)) == RB_DUMP && !cold && !dumping)
|
|
doadump();
|
|
|
|
/* Now that we're going to really halt the system... */
|
|
EVENTHANDLER_INVOKE(shutdown_final, howto);
|
|
|
|
for(;;) ; /* safety against shutdown_reset not working */
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
/*
|
|
* If the shutdown was a clean halt, behave accordingly.
|
|
*/
|
|
static void
|
|
shutdown_halt(void *junk, int howto)
|
|
{
|
|
|
|
if (howto & RB_HALT) {
|
|
printf("\n");
|
|
printf("The operating system has halted.\n");
|
|
printf("Please press any key to reboot.\n\n");
|
|
switch (cngetc()) {
|
|
case -1: /* No console, just die */
|
|
cpu_halt();
|
|
/* NOTREACHED */
|
|
default:
|
|
howto &= ~RB_HALT;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check to see if the system paniced, pause and then reboot
|
|
* according to the specified delay.
|
|
*/
|
|
static void
|
|
shutdown_panic(void *junk, int howto)
|
|
{
|
|
int loop;
|
|
|
|
if (howto & RB_DUMP) {
|
|
if (PANIC_REBOOT_WAIT_TIME != 0) {
|
|
if (PANIC_REBOOT_WAIT_TIME != -1) {
|
|
printf("Automatic reboot in %d seconds - "
|
|
"press a key on the console to abort\n",
|
|
PANIC_REBOOT_WAIT_TIME);
|
|
for (loop = PANIC_REBOOT_WAIT_TIME * 10;
|
|
loop > 0; --loop) {
|
|
DELAY(1000 * 100); /* 1/10th second */
|
|
/* Did user type a key? */
|
|
if (cncheckc() != -1)
|
|
break;
|
|
}
|
|
if (!loop)
|
|
return;
|
|
}
|
|
} else { /* zero time specified - reboot NOW */
|
|
return;
|
|
}
|
|
printf("--> Press a key on the console to reboot,\n");
|
|
printf("--> or switch off the system now.\n");
|
|
cngetc();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Everything done, now reset
|
|
*/
|
|
static void
|
|
shutdown_reset(void *junk, int howto)
|
|
{
|
|
|
|
printf("Rebooting...\n");
|
|
DELAY(1000000); /* wait 1 sec for printf's to complete and be read */
|
|
/* cpu_boot(howto); */ /* doesn't do anything at the moment */
|
|
cpu_reset();
|
|
/* NOTREACHED */ /* assuming reset worked */
|
|
}
|
|
|
|
#ifdef SMP
|
|
static u_int panic_cpu = NOCPU;
|
|
#endif
|
|
|
|
/*
|
|
* Panic is called on unresolvable fatal errors. It prints "panic: mesg",
|
|
* and then reboots. If we are called twice, then we avoid trying to sync
|
|
* the disks as this often leads to recursive panics.
|
|
*/
|
|
void
|
|
panic(const char *fmt, ...)
|
|
{
|
|
struct thread *td = curthread;
|
|
int bootopt, newpanic;
|
|
va_list ap;
|
|
static char buf[256];
|
|
|
|
#ifdef SMP
|
|
/*
|
|
* We don't want multiple CPU's to panic at the same time, so we
|
|
* use panic_cpu as a simple spinlock. We have to keep checking
|
|
* panic_cpu if we are spinning in case the panic on the first
|
|
* CPU is canceled.
|
|
*/
|
|
if (panic_cpu != PCPU_GET(cpuid))
|
|
while (atomic_cmpset_int(&panic_cpu, NOCPU,
|
|
PCPU_GET(cpuid)) == 0)
|
|
while (panic_cpu != NOCPU)
|
|
; /* nothing */
|
|
#endif
|
|
|
|
bootopt = RB_AUTOBOOT | RB_DUMP;
|
|
newpanic = 0;
|
|
if (panicstr)
|
|
bootopt |= RB_NOSYNC;
|
|
else {
|
|
panicstr = fmt;
|
|
newpanic = 1;
|
|
}
|
|
|
|
va_start(ap, fmt);
|
|
if (newpanic) {
|
|
(void)vsnprintf(buf, sizeof(buf), fmt, ap);
|
|
panicstr = buf;
|
|
printf("panic: %s\n", buf);
|
|
} else {
|
|
printf("panic: ");
|
|
vprintf(fmt, ap);
|
|
printf("\n");
|
|
}
|
|
va_end(ap);
|
|
#ifdef SMP
|
|
printf("cpuid = %d\n", PCPU_GET(cpuid));
|
|
#endif
|
|
|
|
#ifdef KDB
|
|
if (newpanic && trace_on_panic)
|
|
kdb_backtrace();
|
|
if (debugger_on_panic)
|
|
kdb_enter(KDB_WHY_PANIC, "panic");
|
|
#ifdef RESTARTABLE_PANICS
|
|
/* See if the user aborted the panic, in which case we continue. */
|
|
if (panicstr == NULL) {
|
|
#ifdef SMP
|
|
atomic_store_rel_int(&panic_cpu, NOCPU);
|
|
#endif
|
|
return;
|
|
}
|
|
#endif
|
|
#endif
|
|
/*thread_lock(td); */
|
|
td->td_flags |= TDF_INPANIC;
|
|
/* thread_unlock(td); */
|
|
if (!sync_on_panic)
|
|
bootopt |= RB_NOSYNC;
|
|
boot(bootopt);
|
|
}
|
|
|
|
/*
|
|
* Support for poweroff delay.
|
|
*/
|
|
#ifndef POWEROFF_DELAY
|
|
# define POWEROFF_DELAY 5000
|
|
#endif
|
|
static int poweroff_delay = POWEROFF_DELAY;
|
|
|
|
SYSCTL_INT(_kern_shutdown, OID_AUTO, poweroff_delay, CTLFLAG_RW,
|
|
&poweroff_delay, 0, "");
|
|
|
|
static void
|
|
poweroff_wait(void *junk, int howto)
|
|
{
|
|
|
|
if (!(howto & RB_POWEROFF) || poweroff_delay <= 0)
|
|
return;
|
|
DELAY(poweroff_delay * 1000);
|
|
}
|
|
|
|
/*
|
|
* Some system processes (e.g. syncer) need to be stopped at appropriate
|
|
* points in their main loops prior to a system shutdown, so that they
|
|
* won't interfere with the shutdown process (e.g. by holding a disk buf
|
|
* to cause sync to fail). For each of these system processes, register
|
|
* shutdown_kproc() as a handler for one of shutdown events.
|
|
*/
|
|
static int kproc_shutdown_wait = 60;
|
|
SYSCTL_INT(_kern_shutdown, OID_AUTO, kproc_shutdown_wait, CTLFLAG_RW,
|
|
&kproc_shutdown_wait, 0, "");
|
|
|
|
void
|
|
kproc_shutdown(void *arg, int howto)
|
|
{
|
|
struct proc *p;
|
|
char procname[MAXCOMLEN + 1];
|
|
int error;
|
|
|
|
if (panicstr)
|
|
return;
|
|
|
|
p = (struct proc *)arg;
|
|
strlcpy(procname, p->p_comm, sizeof(procname));
|
|
printf("Waiting (max %d seconds) for system process `%s' to stop...",
|
|
kproc_shutdown_wait, procname);
|
|
error = kproc_suspend(p, kproc_shutdown_wait * hz);
|
|
|
|
if (error == EWOULDBLOCK)
|
|
printf("timed out\n");
|
|
else
|
|
printf("done\n");
|
|
}
|
|
|
|
void
|
|
kthread_shutdown(void *arg, int howto)
|
|
{
|
|
struct thread *td;
|
|
char procname[MAXCOMLEN + 1];
|
|
int error;
|
|
|
|
if (panicstr)
|
|
return;
|
|
|
|
td = (struct thread *)arg;
|
|
strlcpy(procname, td->td_name, sizeof(procname));
|
|
printf("Waiting (max %d seconds) for system thread `%s' to stop...",
|
|
kproc_shutdown_wait, procname);
|
|
error = kthread_suspend(td, kproc_shutdown_wait * hz);
|
|
|
|
if (error == EWOULDBLOCK)
|
|
printf("timed out\n");
|
|
else
|
|
printf("done\n");
|
|
}
|
|
|
|
/* Registration of dumpers */
|
|
int
|
|
set_dumper(struct dumperinfo *di)
|
|
{
|
|
|
|
if (di == NULL) {
|
|
bzero(&dumper, sizeof dumper);
|
|
return (0);
|
|
}
|
|
if (dumper.dumper != NULL)
|
|
return (EBUSY);
|
|
dumper = *di;
|
|
return (0);
|
|
}
|
|
|
|
#if defined(__powerpc__)
|
|
void
|
|
dumpsys(struct dumperinfo *di __unused)
|
|
{
|
|
|
|
printf("Kernel dumps not implemented on this architecture\n");
|
|
}
|
|
#endif
|