Marius Strobl 8a731a126b - Probe BCM57780. ... - In case the parent is bge(4), don't set the Jumbo frame settings unless the MAC actually is Jumbo capable as otherwise the PHY might not have the corresponding registers implemented. This is also in line with what the Linux tg3 driver does. PR: 165032 Submitted by: Alexander Milanov Obtained from: OpenBSD MFC after: 3 days		2012-02-19 12:09:17 +00:00
..
acphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
acphyreg.h
amphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
amphyreg.h
atphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
atphyreg.h
axphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
bmtphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
bmtphyreg.h
brgphy.c	- Probe BCM57780.	2012-02-19 12:09:17 +00:00
brgphyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
ciphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
ciphyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
e1000phy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
e1000phyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
gentbi.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
icsphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
icsphyreg.h
ip1000phy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
ip1000phyreg.h
jmphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
jmphyreg.h	Add support for JMicron JMC251/JMC261 Gigabit/Fast ethernet	2010-12-18 23:52:50 +00:00
lxtphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
lxtphyreg.h
mii_bitbang.c	- Import the common MII bitbang'ing code from NetBSD and convert drivers to	2011-11-01 16:13:59 +00:00
mii_bitbang.h	- Import the common MII bitbang'ing code from NetBSD and convert drivers to	2011-11-01 16:13:59 +00:00
mii_physubr.c	r221812 reveals that at least some Broadcom PHYs default to being not only	2011-08-19 19:12:58 +00:00
mii.c	- In mii_attach(9) just set the driver for a newly added miibus(4) instance	2011-12-05 21:38:45 +00:00
mii.h	- Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP	2011-05-03 19:51:29 +00:00
miibus_if.m
miidevs	- Probe BCM57780.	2012-02-19 12:09:17 +00:00
miivar.h	There's no need export the device interface methods of miibus(4).	2011-11-18 22:58:13 +00:00
mlphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
nsgphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
nsgphyreg.h
nsphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
nsphyreg.h
nsphyter.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
nsphyterreg.h
pnaphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
qsphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
qsphyreg.h
rdcphy.c	s,KOBJMETHOD_END,DEVMETHOD_END,g in order to fully hide the explicit mention	2011-11-22 21:55:40 +00:00
rdcphyreg.h	Add RDC Semiconductor R6040 10/100 PHY driver.	2010-12-30 23:50:25 +00:00
rgephy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
rgephyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00
rlphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
rlswitch.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
smcphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
tdkphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
tdkphyreg.h
tlphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
tlphyreg.h	- Remove clause 3 and 4 from TNF licenses.	2010-09-26 22:11:41 +00:00
truephy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
truephyreg.h
ukphy_subr.c	o Flesh out the generic IEEE 802.3 annex 31B full duplex flow control	2010-11-14 13:26:10 +00:00
ukphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
xmphy.c	Use DEVMETHOD_END.	2011-11-23 20:27:26 +00:00
xmphyreg.h	Correct spelling in comments.	2011-04-22 09:22:27 +00:00