7e727c55cb
1. fix nointr check in intsmb_start, matters only if ENABLE_ALART is defined (by default, it is not); 2. drop unnecessary inspection/reporting of power-management io registers base address; 3. in verbose mode report errors from SMBus host controller and their mapping to smbus(4) errors; Approved by: jhb (mentor)
783 lines
19 KiB
C
783 lines
19 KiB
C
/*-
|
|
* Copyright (c) 1998, 1999 Takanori Watanabe
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/bus.h>
|
|
#include <dev/smbus/smbconf.h>
|
|
|
|
#include "smbus_if.h"
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <pci/intpmreg.h>
|
|
|
|
#include "opt_intpm.h"
|
|
|
|
struct intsmb_softc {
|
|
device_t dev;
|
|
struct resource *io_res;
|
|
struct resource *irq_res;
|
|
void *irq_hand;
|
|
device_t smbus;
|
|
int isbusy;
|
|
struct mtx lock;
|
|
};
|
|
|
|
#define INTSMB_LOCK(sc) mtx_lock(&(sc)->lock)
|
|
#define INTSMB_UNLOCK(sc) mtx_unlock(&(sc)->lock)
|
|
#define INTSMB_LOCK_ASSERT(sc) mtx_assert(&(sc)->lock, MA_OWNED)
|
|
|
|
static int intsmb_probe(device_t);
|
|
static int intsmb_attach(device_t);
|
|
static int intsmb_detach(device_t);
|
|
static int intsmb_intr(struct intsmb_softc *sc);
|
|
static int intsmb_slvintr(struct intsmb_softc *sc);
|
|
static void intsmb_alrintr(struct intsmb_softc *sc);
|
|
static int intsmb_callback(device_t dev, int index, void *data);
|
|
static int intsmb_quick(device_t dev, u_char slave, int how);
|
|
static int intsmb_sendb(device_t dev, u_char slave, char byte);
|
|
static int intsmb_recvb(device_t dev, u_char slave, char *byte);
|
|
static int intsmb_writeb(device_t dev, u_char slave, char cmd, char byte);
|
|
static int intsmb_writew(device_t dev, u_char slave, char cmd, short word);
|
|
static int intsmb_readb(device_t dev, u_char slave, char cmd, char *byte);
|
|
static int intsmb_readw(device_t dev, u_char slave, char cmd, short *word);
|
|
static int intsmb_pcall(device_t dev, u_char slave, char cmd, short sdata, short *rdata);
|
|
static int intsmb_bwrite(device_t dev, u_char slave, char cmd, u_char count, char *buf);
|
|
static int intsmb_bread(device_t dev, u_char slave, char cmd, u_char *count, char *buf);
|
|
static void intsmb_start(struct intsmb_softc *sc, u_char cmd, int nointr);
|
|
static int intsmb_stop(struct intsmb_softc *sc);
|
|
static int intsmb_stop_poll(struct intsmb_softc *sc);
|
|
static int intsmb_free(struct intsmb_softc *sc);
|
|
static void intsmb_rawintr(void *arg);
|
|
|
|
static int
|
|
intsmb_probe(device_t dev)
|
|
{
|
|
|
|
switch (pci_get_devid(dev)) {
|
|
case 0x71138086: /* Intel 82371AB */
|
|
case 0x719b8086: /* Intel 82443MX */
|
|
#if 0
|
|
/* Not a good idea yet, this stops isab0 functioning */
|
|
case 0x02001166: /* ServerWorks OSB4 */
|
|
#endif
|
|
device_set_desc(dev, "Intel PIIX4 SMBUS Interface");
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
intsmb_attach(device_t dev)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error, rid, value;
|
|
char *str;
|
|
|
|
sc->dev = dev;
|
|
|
|
mtx_init(&sc->lock, device_get_nameunit(dev), "intsmb", MTX_DEF);
|
|
|
|
rid = PCI_BASE_ADDR_SMB;
|
|
sc->io_res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid,
|
|
RF_ACTIVE);
|
|
if (sc->io_res == NULL) {
|
|
device_printf(dev, "Could not allocate I/O space\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
#ifndef NO_CHANGE_PCICONF
|
|
pci_write_config(dev, PCIR_INTLINE, 0x9, 1);
|
|
pci_write_config(dev, PCI_HST_CFG_SMB,
|
|
PCI_INTR_SMB_IRQ9 | PCI_INTR_SMB_ENABLE, 1);
|
|
#endif
|
|
value = pci_read_config(dev, PCI_HST_CFG_SMB, 1);
|
|
switch (value & 0xe) {
|
|
case PCI_INTR_SMB_SMI:
|
|
str = "SMI";
|
|
break;
|
|
case PCI_INTR_SMB_IRQ9:
|
|
str = "IRQ 9";
|
|
break;
|
|
default:
|
|
str = "BOGUS";
|
|
}
|
|
device_printf(dev, "intr %s %s ", str,
|
|
(value & 1) ? "enabled" : "disabled");
|
|
printf("revision %d\n", pci_read_config(dev, PCI_REVID_SMB, 1));
|
|
|
|
if ((value & 0xe) != PCI_INTR_SMB_IRQ9) {
|
|
device_printf(dev, "Unsupported interrupt mode\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Force IRQ 9. */
|
|
rid = 0;
|
|
bus_set_resource(dev, SYS_RES_IRQ, rid, 9, 1);
|
|
sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->irq_res == NULL) {
|
|
device_printf(dev, "Could not allocate irq\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
|
|
NULL, intsmb_rawintr, sc, &sc->irq_hand);
|
|
if (error) {
|
|
device_printf(dev, "Failed to map intr\n");
|
|
goto fail;
|
|
}
|
|
|
|
sc->isbusy = 0;
|
|
sc->smbus = device_add_child(dev, "smbus", -1);
|
|
if (sc->smbus == NULL) {
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
error = device_probe_and_attach(sc->smbus);
|
|
if (error)
|
|
goto fail;
|
|
|
|
#ifdef ENABLE_ALART
|
|
/* Enable Arart */
|
|
bus_write_1(sc->io_res, PIIX4_SMBSLVCNT, PIIX4_SMBSLVCNT_ALTEN);
|
|
#endif
|
|
return (0);
|
|
|
|
fail:
|
|
intsmb_detach(dev);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_detach(device_t dev)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
error = bus_generic_detach(dev);
|
|
if (error)
|
|
return (error);
|
|
|
|
if (sc->smbus)
|
|
device_delete_child(dev, sc->smbus);
|
|
if (sc->irq_hand)
|
|
bus_teardown_intr(dev, sc->irq_res, sc->irq_hand);
|
|
if (sc->irq_res)
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq_res);
|
|
if (sc->io_res)
|
|
bus_release_resource(dev, SYS_RES_IOPORT, PCI_BASE_ADDR_SMB,
|
|
sc->io_res);
|
|
mtx_destroy(&sc->lock);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
intsmb_rawintr(void *arg)
|
|
{
|
|
struct intsmb_softc *sc = arg;
|
|
|
|
INTSMB_LOCK(sc);
|
|
intsmb_intr(sc);
|
|
intsmb_slvintr(sc);
|
|
INTSMB_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
intsmb_callback(device_t dev, int index, void *data)
|
|
{
|
|
int error = 0;
|
|
|
|
switch (index) {
|
|
case SMB_REQUEST_BUS:
|
|
break;
|
|
case SMB_RELEASE_BUS:
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
/* Counterpart of smbtx_smb_free(). */
|
|
static int
|
|
intsmb_free(struct intsmb_softc *sc)
|
|
{
|
|
|
|
INTSMB_LOCK_ASSERT(sc);
|
|
if ((bus_read_1(sc->io_res, PIIX4_SMBHSTSTS) & PIIX4_SMBHSTSTAT_BUSY) ||
|
|
#ifdef ENABLE_ALART
|
|
(bus_read_1(sc->io_res, PIIX4_SMBSLVSTS) & PIIX4_SMBSLVSTS_BUSY) ||
|
|
#endif
|
|
sc->isbusy)
|
|
return (SMB_EBUSY);
|
|
|
|
sc->isbusy = 1;
|
|
/* Disable Interrupt in slave part. */
|
|
#ifndef ENABLE_ALART
|
|
bus_write_1(sc->io_res, PIIX4_SMBSLVCNT, 0);
|
|
#endif
|
|
/* Reset INTR Flag to prepare INTR. */
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTSTS,
|
|
PIIX4_SMBHSTSTAT_INTR | PIIX4_SMBHSTSTAT_ERR |
|
|
PIIX4_SMBHSTSTAT_BUSC | PIIX4_SMBHSTSTAT_FAIL);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
intsmb_intr(struct intsmb_softc *sc)
|
|
{
|
|
int status, tmp;
|
|
|
|
status = bus_read_1(sc->io_res, PIIX4_SMBHSTSTS);
|
|
if (status & PIIX4_SMBHSTSTAT_BUSY)
|
|
return (1);
|
|
|
|
if (status & (PIIX4_SMBHSTSTAT_INTR | PIIX4_SMBHSTSTAT_ERR |
|
|
PIIX4_SMBHSTSTAT_BUSC | PIIX4_SMBHSTSTAT_FAIL)) {
|
|
|
|
tmp = bus_read_1(sc->io_res, PIIX4_SMBHSTCNT);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCNT,
|
|
tmp & ~PIIX4_SMBHSTCNT_INTREN);
|
|
if (sc->isbusy) {
|
|
sc->isbusy = 0;
|
|
wakeup(sc);
|
|
}
|
|
return (0);
|
|
}
|
|
return (1); /* Not Completed */
|
|
}
|
|
|
|
static int
|
|
intsmb_slvintr(struct intsmb_softc *sc)
|
|
{
|
|
int status;
|
|
|
|
status = bus_read_1(sc->io_res, PIIX4_SMBSLVSTS);
|
|
if (status & PIIX4_SMBSLVSTS_BUSY)
|
|
return (1);
|
|
if (status & PIIX4_SMBSLVSTS_ALART)
|
|
intsmb_alrintr(sc);
|
|
else if (status & ~(PIIX4_SMBSLVSTS_ALART | PIIX4_SMBSLVSTS_SDW2
|
|
| PIIX4_SMBSLVSTS_SDW1)) {
|
|
}
|
|
|
|
/* Reset Status Register */
|
|
bus_write_1(sc->io_res, PIIX4_SMBSLVSTS,
|
|
PIIX4_SMBSLVSTS_ALART | PIIX4_SMBSLVSTS_SDW2 |
|
|
PIIX4_SMBSLVSTS_SDW1 | PIIX4_SMBSLVSTS_SLV);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
intsmb_alrintr(struct intsmb_softc *sc)
|
|
{
|
|
int slvcnt;
|
|
#ifdef ENABLE_ALART
|
|
int error;
|
|
uint8_t addr;
|
|
#endif
|
|
|
|
/* Stop generating INTR from ALART. */
|
|
slvcnt = bus_read_1(sc->io_res, PIIX4_SMBSLVCNT);
|
|
#ifdef ENABLE_ALART
|
|
bus_write_1(sc->io_res, PIIX4_SMBSLVCNT,
|
|
slvcnt & ~PIIX4_SMBSLVCNT_ALTEN);
|
|
#endif
|
|
DELAY(5);
|
|
|
|
/* Ask bus who asserted it and then ask it what's the matter. */
|
|
#ifdef ENABLE_ALART
|
|
error = intsmb_free(sc);
|
|
if (error)
|
|
return;
|
|
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, SMBALTRESP | LSB);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_BYTE, 1);
|
|
error = intsmb_stop_poll(sc);
|
|
if (error)
|
|
device_printf(sc->dev, "ALART: ERROR\n");
|
|
else {
|
|
addr = bus_read_1(sc->io_res, PIIX4_SMBHSTDAT0);
|
|
device_printf(sc->dev, "ALART_RESPONSE: 0x%x\n", addr);
|
|
}
|
|
|
|
/* Re-enable INTR from ALART. */
|
|
bus_write_1(sc->io_res, PIIX4_SMBSLVCNT,
|
|
slvcnt | PIIX4_SMBSLVCNT_ALTEN);
|
|
DELAY(5);
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
intsmb_start(struct intsmb_softc *sc, unsigned char cmd, int nointr)
|
|
{
|
|
unsigned char tmp;
|
|
|
|
INTSMB_LOCK_ASSERT(sc);
|
|
tmp = bus_read_1(sc->io_res, PIIX4_SMBHSTCNT);
|
|
tmp &= 0xe0;
|
|
tmp |= cmd;
|
|
tmp |= PIIX4_SMBHSTCNT_START;
|
|
|
|
/* While not in autoconfiguration enable interrupts. */
|
|
if (!cold && !nointr)
|
|
tmp |= PIIX4_SMBHSTCNT_INTREN;
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCNT, tmp);
|
|
}
|
|
|
|
static int
|
|
intsmb_error(device_t dev, int status)
|
|
{
|
|
int error = 0;
|
|
|
|
if (status & PIIX4_SMBHSTSTAT_ERR)
|
|
error |= SMB_EBUSERR;
|
|
if (status & PIIX4_SMBHSTSTAT_BUSC)
|
|
error |= SMB_ECOLLI;
|
|
if (status & PIIX4_SMBHSTSTAT_FAIL)
|
|
error |= SMB_ENOACK;
|
|
|
|
if (error != 0 && bootverbose)
|
|
device_printf(dev, "error = %d, status = %#x\n", error, status);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Polling Code.
|
|
*
|
|
* Polling is not encouraged because it requires waiting for the
|
|
* device if it is busy.
|
|
* (29063505.pdf from Intel) But during boot, interrupt cannot be used, so use
|
|
* polling code then.
|
|
*/
|
|
static int
|
|
intsmb_stop_poll(struct intsmb_softc *sc)
|
|
{
|
|
int error, i, status, tmp;
|
|
|
|
INTSMB_LOCK_ASSERT(sc);
|
|
|
|
/* First, wait for busy to be set. */
|
|
for (i = 0; i < 0x7fff; i++)
|
|
if (bus_read_1(sc->io_res, PIIX4_SMBHSTSTS) &
|
|
PIIX4_SMBHSTSTAT_BUSY)
|
|
break;
|
|
|
|
/* Wait for busy to clear. */
|
|
for (i = 0; i < 0x7fff; i++) {
|
|
status = bus_read_1(sc->io_res, PIIX4_SMBHSTSTS);
|
|
if (!(status & PIIX4_SMBHSTSTAT_BUSY)) {
|
|
sc->isbusy = 0;
|
|
error = intsmb_error(sc->dev, status);
|
|
if (error == 0 && !(status & PIIX4_SMBHSTSTAT_INTR))
|
|
device_printf(sc->dev, "unknown cause why?\n");
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/* Timed out waiting for busy to clear. */
|
|
sc->isbusy = 0;
|
|
tmp = bus_read_1(sc->io_res, PIIX4_SMBHSTCNT);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCNT, tmp & ~PIIX4_SMBHSTCNT_INTREN);
|
|
return (SMB_ETIMEOUT);
|
|
}
|
|
|
|
/*
|
|
* Wait for completion and return result.
|
|
*/
|
|
static int
|
|
intsmb_stop(struct intsmb_softc *sc)
|
|
{
|
|
int error, status;
|
|
|
|
INTSMB_LOCK_ASSERT(sc);
|
|
|
|
if (cold)
|
|
/* So that it can use device during device probe on SMBus. */
|
|
return (intsmb_stop_poll(sc));
|
|
|
|
error = msleep(sc, &sc->lock, PWAIT | PCATCH, "SMBWAI", hz / 8);
|
|
if (error == 0) {
|
|
status = bus_read_1(sc->io_res, PIIX4_SMBHSTSTS);
|
|
if (!(status & PIIX4_SMBHSTSTAT_BUSY)) {
|
|
error = intsmb_error(sc->dev, status);
|
|
if (error == 0 && !(status & PIIX4_SMBHSTSTAT_INTR))
|
|
device_printf(sc->dev, "unknown cause why?\n");
|
|
#ifdef ENABLE_ALART
|
|
bus_write_1(sc->io_res, PIIX4_SMBSLVCNT,
|
|
PIIX4_SMBSLVCNT_ALTEN);
|
|
#endif
|
|
return (error);
|
|
}
|
|
}
|
|
|
|
/* Timeout Procedure. */
|
|
sc->isbusy = 0;
|
|
|
|
/* Re-enable supressed interrupt from slave part. */
|
|
bus_write_1(sc->io_res, PIIX4_SMBSLVCNT, PIIX4_SMBSLVCNT_ALTEN);
|
|
if (error == EWOULDBLOCK)
|
|
return (SMB_ETIMEOUT);
|
|
else
|
|
return (SMB_EABORT);
|
|
}
|
|
|
|
static int
|
|
intsmb_quick(device_t dev, u_char slave, int how)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
u_char data;
|
|
|
|
data = slave;
|
|
|
|
/* Quick command is part of Address, I think. */
|
|
switch(how) {
|
|
case SMB_QWRITE:
|
|
data &= ~LSB;
|
|
break;
|
|
case SMB_QREAD:
|
|
data |= LSB;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, data);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_QUICK, 0);
|
|
error = intsmb_stop(sc);
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_sendb(device_t dev, u_char slave, char byte)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave & ~LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, byte);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_BYTE, 0);
|
|
error = intsmb_stop(sc);
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_recvb(device_t dev, u_char slave, char *byte)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave | LSB);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_BYTE, 0);
|
|
error = intsmb_stop(sc);
|
|
if (error == 0) {
|
|
#ifdef RECV_IS_IN_CMD
|
|
/*
|
|
* Linux SMBus stuff also troubles
|
|
* Because Intel's datasheet does not make clear.
|
|
*/
|
|
*byte = bus_read_1(sc->io_res, PIIX4_SMBHSTCMD);
|
|
#else
|
|
*byte = bus_read_1(sc->io_res, PIIX4_SMBHSTDAT0);
|
|
#endif
|
|
}
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_writeb(device_t dev, u_char slave, char cmd, char byte)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave & ~LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, cmd);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTDAT0, byte);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_BDATA, 0);
|
|
error = intsmb_stop(sc);
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_writew(device_t dev, u_char slave, char cmd, short word)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave & ~LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, cmd);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTDAT0, word & 0xff);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTDAT1, (word >> 8) & 0xff);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_WDATA, 0);
|
|
error = intsmb_stop(sc);
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_readb(device_t dev, u_char slave, char cmd, char *byte)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave | LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, cmd);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_BDATA, 0);
|
|
error = intsmb_stop(sc);
|
|
if (error == 0)
|
|
*byte = bus_read_1(sc->io_res, PIIX4_SMBHSTDAT0);
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_readw(device_t dev, u_char slave, char cmd, short *word)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave | LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, cmd);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_WDATA, 0);
|
|
error = intsmb_stop(sc);
|
|
if (error == 0) {
|
|
*word = bus_read_1(sc->io_res, PIIX4_SMBHSTDAT0);
|
|
*word |= bus_read_1(sc->io_res, PIIX4_SMBHSTDAT1) << 8;
|
|
}
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Data sheet claims that it implements all function, but also claims
|
|
* that it implements 7 function and not mention PCALL. So I don't know
|
|
* whether it will work.
|
|
*/
|
|
static int
|
|
intsmb_pcall(device_t dev, u_char slave, char cmd, short sdata, short *rdata)
|
|
{
|
|
#ifdef PROCCALL_TEST
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave & ~LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, cmd);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTDAT0, sdata & 0xff);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTDAT1, (sdata & 0xff) >> 8);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_WDATA, 0);
|
|
error = intsmb_stop(sc);
|
|
if (error == 0) {
|
|
*rdata = bus_read_1(sc->io_res, PIIX4_SMBHSTDAT0);
|
|
*rdata |= bus_read_1(sc->io_res, PIIX4_SMBHSTDAT1) << 8;
|
|
}
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
#else
|
|
return (SMB_ENOTSUPP);
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
intsmb_bwrite(device_t dev, u_char slave, char cmd, u_char count, char *buf)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error, i;
|
|
|
|
if (count > SMBBLOCKTRANS_MAX || count == 0)
|
|
return (SMB_EINVAL);
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
/* Reset internal array index. */
|
|
bus_read_1(sc->io_res, PIIX4_SMBHSTCNT);
|
|
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave & ~LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, cmd);
|
|
for (i = 0; i < count; i++)
|
|
bus_write_1(sc->io_res, PIIX4_SMBBLKDAT, buf[i]);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTDAT0, count);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_BLOCK, 0);
|
|
error = intsmb_stop(sc);
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
intsmb_bread(device_t dev, u_char slave, char cmd, u_char *count, char *buf)
|
|
{
|
|
struct intsmb_softc *sc = device_get_softc(dev);
|
|
int error, i;
|
|
u_char data, nread;
|
|
|
|
if (*count > SMBBLOCKTRANS_MAX || *count == 0)
|
|
return (SMB_EINVAL);
|
|
|
|
INTSMB_LOCK(sc);
|
|
error = intsmb_free(sc);
|
|
if (error) {
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
/* Reset internal array index. */
|
|
bus_read_1(sc->io_res, PIIX4_SMBHSTCNT);
|
|
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTADD, slave | LSB);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTCMD, cmd);
|
|
bus_write_1(sc->io_res, PIIX4_SMBHSTDAT0, *count);
|
|
intsmb_start(sc, PIIX4_SMBHSTCNT_PROT_BLOCK, 0);
|
|
error = intsmb_stop(sc);
|
|
if (error == 0) {
|
|
nread = bus_read_1(sc->io_res, PIIX4_SMBHSTDAT0);
|
|
if (nread != 0 && nread <= SMBBLOCKTRANS_MAX) {
|
|
for (i = 0; i < nread; i++) {
|
|
data = bus_read_1(sc->io_res, PIIX4_SMBBLKDAT);
|
|
if (i < *count)
|
|
buf[i] = data;
|
|
}
|
|
*count = nread;
|
|
} else
|
|
error = EIO;
|
|
}
|
|
INTSMB_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
static devclass_t intsmb_devclass;
|
|
|
|
static device_method_t intsmb_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, intsmb_probe),
|
|
DEVMETHOD(device_attach, intsmb_attach),
|
|
DEVMETHOD(device_detach, intsmb_detach),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
|
|
/* SMBus interface */
|
|
DEVMETHOD(smbus_callback, intsmb_callback),
|
|
DEVMETHOD(smbus_quick, intsmb_quick),
|
|
DEVMETHOD(smbus_sendb, intsmb_sendb),
|
|
DEVMETHOD(smbus_recvb, intsmb_recvb),
|
|
DEVMETHOD(smbus_writeb, intsmb_writeb),
|
|
DEVMETHOD(smbus_writew, intsmb_writew),
|
|
DEVMETHOD(smbus_readb, intsmb_readb),
|
|
DEVMETHOD(smbus_readw, intsmb_readw),
|
|
DEVMETHOD(smbus_pcall, intsmb_pcall),
|
|
DEVMETHOD(smbus_bwrite, intsmb_bwrite),
|
|
DEVMETHOD(smbus_bread, intsmb_bread),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t intsmb_driver = {
|
|
"intsmb",
|
|
intsmb_methods,
|
|
sizeof(struct intsmb_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(intsmb, pci, intsmb_driver, intsmb_devclass, 0, 0);
|
|
DRIVER_MODULE(smbus, intsmb, smbus_driver, smbus_devclass, 0, 0);
|
|
MODULE_DEPEND(intsmb, smbus, SMBUS_MINVER, SMBUS_PREFVER, SMBUS_MAXVER);
|
|
MODULE_VERSION(intsmb, 1);
|