484 lines
16 KiB
Plaintext
484 lines
16 KiB
Plaintext
#
|
||
# LINT -- config file for checking all the sources, tries to pull in
|
||
# as much of the source tree as it can.
|
||
#
|
||
# This kernel is NOT MEANT to be runnable!
|
||
#
|
||
# $Id: LINT,v 1.110 1994/11/27 14:59:54 ats Exp $
|
||
#
|
||
|
||
#
|
||
# This directive is mandatory; it defines the architecture to be
|
||
# configured for; in this case, the 386 family. You must also specify
|
||
# at least one CPU (the one you intend to run on); deleting the
|
||
# specification for CPUs you don't need to use may make parts of the
|
||
# system run faster
|
||
#
|
||
machine "i386"
|
||
cpu "I386_CPU"
|
||
cpu "I486_CPU"
|
||
cpu "I586_CPU" # a/k/a Pentium(tm)
|
||
|
||
#
|
||
# This is the ``identification'' of the kernel. Usually this should
|
||
# be the same as the name of your kernel.
|
||
#
|
||
ident LINT
|
||
|
||
#
|
||
# The `maxusers' parameter controls the static sizing of a number of
|
||
# internal system tables by a complicated formula defined in param.c.
|
||
#
|
||
maxusers 10
|
||
|
||
#
|
||
# A math emulator is mandatory if you wish to run on hardware which
|
||
# does not have a floating-point processor. Pick either the original,
|
||
# bogus (but freely-distributable) math emulator, or a much more
|
||
# fully-featured but GPL-licensed emulator taken from Linux.
|
||
#
|
||
options MATH_EMULATE #Support for x87 emulation
|
||
#options GPL_MATH_EMULATE #Support for x87 emualtion via
|
||
#new math emulator
|
||
|
||
#
|
||
# This directive defines a number of things:
|
||
# - The compiled kernel is to be called `kernel'
|
||
# - The root filesystem might be on partition wd0a
|
||
# - The kernel can swap on wd0b and sd0b, defaulting to the former
|
||
# - Crash dumps will be written to wd0b, if possible
|
||
#
|
||
config kernel root on wd0 swap on wd0 and sd0 dumps on wd0
|
||
|
||
|
||
#####################################################################
|
||
# COMPATIBILITY OPTIONS
|
||
|
||
#
|
||
# Implement system calls compatible with 4.3BSD and older versions of
|
||
# FreeBSD.
|
||
#
|
||
options "COMPAT_43"
|
||
|
||
#
|
||
# Allow user-mode programs to manipulat their local descriptor tables.
|
||
# This option is required for the WINE Windows(tm) emulator, and is
|
||
# not used by anything else (that we know of).
|
||
#
|
||
options USER_LDT #allow user-level control of i386 ldt
|
||
|
||
#
|
||
# These three options provide support for System V Interface
|
||
# Definition-style interprocess communication, in the form of shared
|
||
# memory, semaphores, and message queues, respectively.
|
||
#
|
||
options SYSVSHM
|
||
options SYSVSEM
|
||
options SYSVMSG
|
||
|
||
|
||
#####################################################################
|
||
# DEBUGGING OPTIONS
|
||
|
||
#
|
||
# This line enables the kernel debugger, DDB, and the line following
|
||
# allocates extra space for a copy of the debugger symbol table which
|
||
# is stored in the initialized data area of the kernel. If you change
|
||
# the latter option, remove db_aout.o before compiling.
|
||
#
|
||
options DODUMP #We dump core-image on panic
|
||
options DDB #Kernel debugger
|
||
options "SYMTAB_SPACE=159100" #This kernel needs LOTS of symtable
|
||
|
||
#
|
||
# KTRACE enables the system-call tracing facility ktrace(2).
|
||
#
|
||
options KTRACE #kernel tracing
|
||
|
||
#
|
||
# The DIAGNOSTIC option is used in a number of source files to enable
|
||
# extra sanity checking of internal structures. This support is not
|
||
# enabled by default because of the extra time it would take to check
|
||
# for these conditions, which can only occur as a result of
|
||
# programming errors.
|
||
#
|
||
options DIAGNOSTIC
|
||
|
||
|
||
#####################################################################
|
||
# NETWORKING OPTIONS
|
||
|
||
#
|
||
# Protocol families:
|
||
# Only the INET (Internet) family is officially supported in FreeBSD.
|
||
# Source code for the NS (Xerox Network Service), ISO (OSI), and
|
||
# CCITT (X.25) families is provided for amusement value, although we
|
||
# try to ensure that it actually compiles.
|
||
#
|
||
options INET #Internet communications protocols
|
||
options ISO
|
||
options CCITT #X.25 network layer
|
||
options NS #Xerox NS communications protocols
|
||
options TPIP #ISO TP class 4 over IP
|
||
options TPCONS #ISO TP class 0 over X.25
|
||
|
||
#
|
||
# Network interfaces:
|
||
# The `loop' pseudo-device is mandatory when networking is enabled.
|
||
# The `ether' pseudo-device provides generic code to handle
|
||
# Ethernets; it is mandatory when a Ethernet device driver is
|
||
# configured.
|
||
# The `sppp' pseudo-device serves a similar role for certain types
|
||
# of synchronous PPP links (like `cx').
|
||
# The `sl' pseudo-device implements the Serial Line IP (SLIP) service.
|
||
# The `ppp' pseudo-device implements the Point-to-Point Protocol.
|
||
# The `bpfilter' pseudo-device enables the Berkeley Packet Filter. Be
|
||
# aware of the legal and administrative consequences of enabling this
|
||
# option. The number of devices determines the maximum number of
|
||
# simultaneous BPF clients programs runnable.
|
||
#
|
||
pseudo-device ether #Generic Ethernet
|
||
pseudo-device sppp #Generic Synchronous PPP
|
||
pseudo-device loop #Network loop back device
|
||
pseudo-device sl 2 #Serial Line IP
|
||
pseudo-device ppp 2 #Point-to-point protocol
|
||
pseudo-device bpfilter 4 #Berkeley packet filter
|
||
|
||
options NSIP #XNS over IP
|
||
options EON #ISO CLNP over IP
|
||
options LLC #X.25 link layer for Ethernets
|
||
options HDLC #X.25 link layer for serial lines
|
||
|
||
#
|
||
# Internet family options:
|
||
#
|
||
# TCP_COMPAT_42 causes the TCP code to emulate certain bugs present in
|
||
# 4.2BSD. This option should not be used unless you have a 4.2BSD
|
||
# machine and TCP connections fail.
|
||
#
|
||
# GATEWAY allows the machine to forward packets, and also configures
|
||
# larger static sizes of a number of system tables.
|
||
#
|
||
# MROUTING enables the kernel multicast packet forwarder, which works
|
||
# with mrouted(8).
|
||
#
|
||
# IPFIREWALL enables support for IP firewall construction, in
|
||
# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE does
|
||
# the obvious thing.
|
||
#
|
||
# ARP_PROXYALL enables global proxy ARP. Beware! This can burn
|
||
# your house down! See netinet/if_ether.c for the gory details.
|
||
# (Eventually there will be a better management interface.)
|
||
#
|
||
options "TCP_COMPAT_42" #emulate 4.2BSD TCP bugs
|
||
options GATEWAY #internetwork gateway
|
||
options MROUTING # Multicast routing
|
||
options IPFIREWALL #firewall
|
||
options IPFIREWALL_VERBOSE #print information about
|
||
# dropped packets
|
||
options ARP_PROXYALL # global proxy ARP
|
||
|
||
|
||
#####################################################################
|
||
# FILESYSTEM OPTIONS
|
||
|
||
#
|
||
# Only the root, /usr, and /tmp filesystems need be statically
|
||
# compiled; everything else will be automatically loaded at mount
|
||
# time. (Exception: the UFS family---FFS, MFS, and LFS---cannot
|
||
# currently be demand-loaded.) Some people still prefer to statically
|
||
# compile other filesystems as well.
|
||
#
|
||
# NB: The LFS, PORTAL, and UNION filesystems are known to be buggy,
|
||
# and WILL panic your system if you attempt to do anything with them.
|
||
# They are included here as an incentive for some enterprising soul to
|
||
# sit down and fix them.
|
||
#
|
||
|
||
# One of these is mandatory:
|
||
options FFS #Fast filesystem
|
||
options NFS #Network File System
|
||
|
||
# The rest are optional:
|
||
options "CD9660" #ISO 9660 filesystem
|
||
options FDESC #File descriptor filesystem
|
||
options KERNFS #Kernel filesystem
|
||
options LFS #Log filesystem
|
||
options MFS #Memory File System
|
||
options MSDOSFS #MS DOS File System
|
||
options NULLFS #NULL filesystem
|
||
options PORTAL #Portal filesystem
|
||
options PROCFS #Process filesystem
|
||
options UMAPFS #UID map filesystem
|
||
options UNION #Union filesystem
|
||
|
||
#
|
||
# Disk quotas are supported when this option is enabled. If you
|
||
# change the value of this option, you must do a `make clean' in your
|
||
# kernel compile directory in order to get a working kernel.
|
||
#
|
||
options QUOTA #enable disk quotas
|
||
|
||
|
||
#####################################################################
|
||
# SCSI DEVICE CONFIGURATION
|
||
|
||
#
|
||
# The SCSI subsystem consists of the `base' SCSI code, a number of
|
||
# high-level SCSI device drivers, and the low-level host-adapter
|
||
# device drivers. The host adapters are listed in the ISA and PCI
|
||
# device configuration sections below.
|
||
#
|
||
# Note that, unlike most similar systems, the FreeBSD SCSI system
|
||
# does not wire a particular device unit number to any specific
|
||
# SCSI bus unit number. Rather, unit numbers are assigned in the
|
||
# order that the devices are found on the SCSI bus. (This means that
|
||
# if you remove a disk drive, you may have to rewrite your /etc/fstab
|
||
# file.) It is expected that this will change for FreeBSD 2.1.
|
||
#
|
||
controller scbus0 #base SCSI code
|
||
device ch0 #SCSI media changers
|
||
device sd0 #SCSI disks
|
||
device sd1
|
||
device sd2
|
||
device sd3
|
||
device st0 #SCSI tapes
|
||
device st1
|
||
device uk0 #unknown scsi devices
|
||
|
||
#
|
||
# The `cd' (SCSI read-only removable disk) driver is special in that
|
||
# the code dynamically allocates more units as they are required, with
|
||
# no limit (other than memory) to the number available.
|
||
device cd0 #SCSI CD-ROMs
|
||
|
||
|
||
#####################################################################
|
||
# MISCELLANEOUS DEVICES AND OPTIONS
|
||
|
||
#
|
||
# Of these, only the `log' device is truly mandatory. The `pty'
|
||
# device usually turns out to be ``effectively mandatory'', as it is
|
||
# required for `telnetd', `rlogind', `screen', `emacs', and `xterm',
|
||
# among others.
|
||
#
|
||
pseudo-device pty 4 #Pseudo ttys
|
||
pseudo-device speaker #Play IBM BASIC-style noises out your speaker
|
||
pseudo-device log #Kernel syslog interface (/dev/klog)
|
||
pseudo-device gzip #Exec gzipped a.out's
|
||
|
||
|
||
#####################################################################
|
||
# HARDWARE DEVICE CONFIGURATION
|
||
|
||
# ISA and EISA devices:
|
||
# Currently there is no separate support for EISA. There should be.
|
||
# Micro Channel is not supported at all.
|
||
|
||
#
|
||
# Mandatory ISA devices: isa, sc, npx
|
||
#
|
||
controller isa0
|
||
|
||
#
|
||
# Options for `isa':
|
||
#
|
||
# ALLOW_CONFLICT_IOADDR suppresses the I/O address conflict checks, so
|
||
# that the PS/2 mouse driver doesn't conflict with the console driver.
|
||
#
|
||
# ALLOW_CONFLICT_IRQ suppresses the interrupt line conflict checks, so
|
||
# that multiple devices can share the same IRQ, provided that the
|
||
# hardware supports it (it usually doesn't).
|
||
#
|
||
# BOUNCE_BUFFERS provides support for ISA DMA on machines with more
|
||
# than 16 megabytes of memory. It doesn't hurt on other machines.
|
||
# Some broken EISA and VLB hardware may need this, too.
|
||
#options ALLOW_CONFLICT_IOADDR
|
||
#options ALLOW_CONFLICT_IRQ
|
||
options BOUNCE_BUFFERS
|
||
|
||
device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr
|
||
|
||
#
|
||
# Options for `sc':
|
||
#
|
||
# NCONS specifies the number of virtual consoles. Specification of
|
||
# this value is mandatory. Due to a compiler bug, when compiling with
|
||
# GCC 2.6.0 this option must be a power of two.
|
||
#
|
||
# FAT_CURSOR specifies the use of a large block cursor rather than the
|
||
# hardware default underline.
|
||
#
|
||
# HARDFONTS allows the driver to load an ISO-8859-1 font to replace
|
||
# the default font in your display adapter's memory.
|
||
#
|
||
# UCONSOLE enables code to let any user get output intended for the
|
||
# console.
|
||
#
|
||
options "NCONS=8"
|
||
options "FAT_CURSOR"
|
||
options HARDFONTS
|
||
options UCONSOLE
|
||
|
||
device npx0 at isa? port "IO_NPX" irq 13 vector npxintr
|
||
|
||
#
|
||
# Optional ISA and EISA devices:
|
||
#
|
||
|
||
#
|
||
# SCSI host adapters: `aha', `ahb', `aic', `bt', `pas'
|
||
#
|
||
# aha: Adaptec 154x
|
||
# ahb: Adaptec 174x
|
||
# aic: Adaptec 152x and sound cards using the Adaptec AIC-6360 (slow!)
|
||
# bt: Most Buslogic controllers
|
||
# pas: ProAudioSpectrum cards using the NCR 5380 (slow!)
|
||
# uha: UltraStore 14F and 34F
|
||
# sea: Seagate ST01/02 8 bit controller (slow!)
|
||
#
|
||
# Note that the order is important in order for Buslogic cards to be
|
||
# probed correctly.
|
||
#
|
||
|
||
controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr
|
||
controller ahb0 at isa? bio irq ? vector ahbintr
|
||
controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
|
||
controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
|
||
|
||
controller aic0 at isa? port 0x340 bio irq 11 vector aicintr
|
||
controller pas0 at isa? port 0x1f88
|
||
controller pas1 at isa? port 0x1f84
|
||
controller pas2 at isa? port 0x1f8c
|
||
controller pas3 at isa? port 0x1e88
|
||
|
||
controller sea0 at isa? bio irq 5 iomem 0xdc000 iosiz 0x2000 vector seaintr
|
||
|
||
#
|
||
# ST-506, ESDI, and IDE hard disks: `wdc' and `wd'
|
||
#
|
||
# NB: ``Enhanced IDE'' is NOT supported at this time.
|
||
#
|
||
controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr
|
||
disk wd0 at wdc0 drive 0
|
||
disk wd1 at wdc0 drive 1
|
||
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
|
||
disk wd2 at wdc1 drive 0
|
||
disk wd3 at wdc1 drive 1
|
||
|
||
#
|
||
# Standard floppy disk controllers and floppy tapes: `fdc', `fd', and `ft'
|
||
#
|
||
controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
|
||
disk fd0 at fdc0 drive 0
|
||
disk fd1 at fdc0 drive 1
|
||
tape ft0 at fdc0 drive 2
|
||
|
||
#
|
||
# Options for `fd':
|
||
#
|
||
# FDSEEKWAIT selects a non-default head-settle time (i.e., the time to
|
||
# wait after a seek is performed). The default value (1/32 s) is
|
||
# usually sufficient. The units are inverse seconds, so a value of 16
|
||
# here means to wait 1/16th of a second; you should choose a power of
|
||
# two.
|
||
#
|
||
options FDSEEKWAIT="16"
|
||
|
||
#
|
||
# Other standard PC hardware: `lpt', `mse', `psm', `sio'
|
||
#
|
||
# lpt: printer port
|
||
# mse: Logitech and ATI InPort bus mouse ports
|
||
# psm: PS/2 mouse port (needs ALLOW_CONFLICT_IOADDR, above)
|
||
# sio: serial ports (see sio(4))
|
||
|
||
device lpt0 at isa? port "IO_LPT3" tty irq 7 vector lptintr
|
||
device mse0 at isa? port 0x23c tty irq 5 vector mseintr
|
||
device psm0 at isa? port "IO_KBD" tty irq 12 vector psmintr
|
||
device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr
|
||
|
||
# Options for sio:
|
||
options DSI_SOFT_MODEM #code for DSI Softmodems
|
||
|
||
#
|
||
# Network interfaces: `cx', `ed', `el', `ep', `ie', `is', `le', `lnc'
|
||
#
|
||
# cx: Cronyx/Sigma multiport sync/async (with Cisco or PPP framing)
|
||
# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
|
||
# el: 3Com 3C501 (slow!)
|
||
# ep: 3Com 3C509 (buggy)
|
||
# ie: AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210
|
||
# is: Isolan AT 4141-0; Isolink 4110; Novell NE2100
|
||
# le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
|
||
# DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
|
||
# lnc: unknown LANCE-based
|
||
# ze: PCMCIA ethernet controller.
|
||
#
|
||
|
||
device cx0 at isa? port 0x240 net irq 15 drq 7 vector cxintr
|
||
device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
|
||
device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
|
||
device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
|
||
device ep0 at isa? port 0x300 net irq 10 vector epintr
|
||
device el0 at isa? port 0x300 net irq 9 vector elintr
|
||
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
|
||
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
|
||
#device lnc0 at isa? XXX FILL ME IN
|
||
|
||
#
|
||
# Audio drivers: `snd', `pca'
|
||
#
|
||
# snd: Voxware sound drivers for various cards (see file `sound.doc')
|
||
# pca: PCM audio through your PC speaker
|
||
#
|
||
# Someday, Voxware configuration will be done properly.
|
||
#
|
||
device snd5 at isa? port 0x330 irq 6 vector mpuintr
|
||
device snd4 at isa? port 0x220 irq 15 drq 6 vector gusintr
|
||
device snd3 at isa? port 0x388 irq 10 drq 6 vector pasintr
|
||
device snd2 at isa? port 0x220 irq 7 drq 1 vector sbintr
|
||
device snd6 at isa? port 0x220 irq 7 drq 5 vector sbintr
|
||
device snd7 at isa? port 0x300
|
||
device snd1 at isa? port 0x388
|
||
|
||
device pca0 at isa? tty
|
||
|
||
#
|
||
# Miscellaneous hardware: `mcd', `wt', `ctx', `apm'
|
||
#
|
||
# mcd: Mitsumi CD-ROM
|
||
# wt: Wangtek and Archive QIC-02/QIC-36 tape drives
|
||
# ctx: Cortex-I frame grabber
|
||
# apm: Laptop Advanced Power Management (experimental)
|
||
#
|
||
|
||
device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr
|
||
device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr
|
||
device ctx0 at isa? port 0x230 iomem 0xd0000
|
||
|
||
# NB: both lines are required
|
||
device apm0 at isa?
|
||
options APM
|
||
|
||
#
|
||
# PCI devices:
|
||
#
|
||
# The main PCI bus device is `pci'. It provides auto-detection and
|
||
# configuration support for all devices on the PCI bus, using either
|
||
# configuration mode defined in the PCI specification.
|
||
#
|
||
# The `ncr' device provides support for the NCR 53C810 and 53C825
|
||
# self-contained SCSI host adapters.
|
||
#
|
||
# The `de' device provides support for the Digital Equipment DC21040
|
||
# self-contained Ethernet adapter.
|
||
#
|
||
# The PROBE_VERBOSE option enables a long listing of chip set registers
|
||
# for supported PCI chip sets (currently only intel Saturn and Mercury).
|
||
#
|
||
controller pci0
|
||
device ncr0
|
||
device de0
|
||
options PROBE_VERBOSE
|