freebsd kernel with SKQ
8c00aba8c4
This is largely the work from the projects/uefi branch, with some additional refinements. This is derived from (and replaces) the original i386 efi implementation; i386 support will be restored later. Specific revisions of note from projects/uefi: r247380: Adjust our load device when we boot from CD under UEFI. The process for booting from a CD under UEFI involves adding a FAT filesystem containing your loader code as an El Torito boot image. When UEFI detects this, it provides a block IO instance that points at the FAT filesystem as a child of the device that represents the CD itself. The problem being that the CD device is flagged as a "raw device" while the boot image is flagged as a "logical partition". The existing EFI partition code only looks for logical partitions and so the CD filesystem was rendered invisible. To fix this, check the type of each block IO device. If it's found to be a CD, and thus an El Torito boot image, look up its parent device and add that instead so that the loader will then load the kernel from the CD filesystem. This is done by using the handle for the boot filesystem as an alias. Something similar to this will be required for booting from other media as well as the loader will live in the EFI system partition, not on the partition containing the kernel. r246231: Add necessary code to hand off from loader to an amd64 kernel. r246335: Grab the EFI memory map and store it as module metadata on the kernel. This is the same approach used to provide the BIOS SMAP to the kernel. r246336: Pass the ACPI table metadata via hints so the kernel ACPI code can find them. r246608: Rework copy routines to ensure we always use memory allocated via EFI. The previous code assumed it could copy wherever it liked. This is not the case. The approach taken by this code is pretty ham-fisted in that it simply allocates a large (32MB) buffer area and stages into that, then copies the whole area into place when it's time to execute. A more elegant solution could be used but this works for now. r247214: Fix a number of problems preventing proper handover to the kernel. There were two issues at play here. Firstly, there was nothing preventing UEFI from placing the loader code above 1GB in RAM. This meant that when we switched in the page tables the kernel expects to be running on, we are suddenly unmapped and things no longer work. We solve this by making our trampoline code not dependent on being at any given position and simply copying it to a "safe" location before calling it. Secondly, UEFI could allocate our stack wherever it wants. As it happened on my PC, that was right where I was copying the kernel to. This did not cause happiness. The solution to this was to also switch to a temporary stack in a safe location before performing the final copy of the loaded kernel. r246231: Add necessary code to hand off from loader to an amd64 kernel. r246335: Grab the EFI memory map and store it as module metadata on the kernel. This is the same approach used to provide the BIOS SMAP to the kernel. r246336: Pass the ACPI table metadata via hints so the kernel ACPI code can find them. r246608: Rework copy routines to ensure we always use memory allocated via EFI. The previous code assumed it could copy wherever it liked. This is not the case. The approach taken by this code is pretty ham-fisted in that it simply allocates a large (32MB) buffer area and stages into that, then copies the whole area into place when it's time to execute. A more elegant solution could be used but this works for now. r247214: Fix a number of problems preventing proper handover to the kernel. There were two issues at play here. Firstly, there was nothing preventing UEFI from placing the loader code above 1GB in RAM. This meant that when we switched in the page tables the kernel expects to be running on, we are suddenly unmapped and things no longer work. We solve this by making our trampoline code not dependent on being at any given position and simply copying it to a "safe" location before calling it. Secondly, UEFI could allocate our stack wherever it wants. As it happened on my PC, that was right where I was copying the kernel to. This did not cause happiness. The solution to this was to also switch to a temporary stack in a safe location before performing the final copy of the loaded kernel. r247216: Use the UEFI Graphics Output Protocol to get the parameters of the framebuffer. Sponsored by: The FreeBSD Foundation |
||
|---|---|---|
| bin | ||
| cddl | ||
| contrib | ||
| crypto | ||
| etc | ||
| games | ||
| gnu | ||
| include | ||
| kerberos5 | ||
| lib | ||
| libexec | ||
| release | ||
| rescue | ||
| sbin | ||
| secure | ||
| share | ||
| sys | ||
| tests | ||
| tools | ||
| usr.bin | ||
| usr.sbin | ||
| COPYRIGHT | ||
| LOCKS | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc1 | ||
| ObsoleteFiles.inc | ||
| README | ||
| UPDATING | ||
This is the top level of the FreeBSD source directory. This file was last revised on: $FreeBSD$ For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information). The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree, the most commonly used one being ``world'', which rebuilds and installs everything in the FreeBSD system from the source tree except the kernel, the kernel-modules and the contents of /etc. The ``world'' target should only be used in cases where the source tree has not changed from the currently running version. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables. The ``buildkernel'' and ``installkernel'' targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags. Building a kernel is a somewhat more involved process, documentation for which can be found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html And in the config(8) man page. Note: If you want to build and install the kernel with the ``buildkernel'' and ``installkernel'' targets, you might need to build world before. More information is available in the handbook. The sample kernel configuration files reside in the sys/<arch>/conf sub-directory (assuming that you've installed the kernel sources), the file named GENERIC being the one used to build your initial installation kernel. The file NOTES contains entries and documentation for all possible devices, not just those commonly used. It is the successor of the ancient LINT file, but in contrast to LINT, it is not buildable as a kernel but a pure reference and documentation file. Source Roadmap: --------------- bin System/user commands. cddl Various commands and libraries under the Common Development and Distribution License. contrib Packages contributed by 3rd parties. crypto Cryptography stuff (see crypto/README). etc Template files for /etc. games Amusements. gnu Various commands and libraries under the GNU Public License. Please see gnu/COPYING* for more information. include System include files. kerberos5 Kerberos5 (Heimdal) package. lib System libraries. libexec System daemons. release Release building Makefile & associated tools. rescue Build system for statically linked /rescue utilities. sbin System commands. secure Cryptographic libraries and commands. share Shared resources. sys Kernel sources. tools Utilities for regression testing and miscellaneous tasks. usr.bin User commands. usr.sbin System administration commands. For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html