760 lines
21 KiB
C
760 lines
21 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <netinet/if_ether.h>
|
|
#include <dev/wi/if_wavelan_ieee.h>
|
|
#include <sys/bus.h>
|
|
|
|
struct wi_counters {
|
|
u_int32_t wi_tx_unicast_frames;
|
|
u_int32_t wi_tx_multicast_frames;
|
|
u_int32_t wi_tx_fragments;
|
|
u_int32_t wi_tx_unicast_octets;
|
|
u_int32_t wi_tx_multicast_octets;
|
|
u_int32_t wi_tx_deferred_xmits;
|
|
u_int32_t wi_tx_single_retries;
|
|
u_int32_t wi_tx_multi_retries;
|
|
u_int32_t wi_tx_retry_limit;
|
|
u_int32_t wi_tx_discards;
|
|
u_int32_t wi_rx_unicast_frames;
|
|
u_int32_t wi_rx_multicast_frames;
|
|
u_int32_t wi_rx_fragments;
|
|
u_int32_t wi_rx_unicast_octets;
|
|
u_int32_t wi_rx_multicast_octets;
|
|
u_int32_t wi_rx_fcs_errors;
|
|
u_int32_t wi_rx_discards_nobuf;
|
|
u_int32_t wi_tx_discards_wrong_sa;
|
|
u_int32_t wi_rx_WEP_cant_decrypt;
|
|
u_int32_t wi_rx_msg_in_msg_frags;
|
|
u_int32_t wi_rx_msg_in_bad_msg_frags;
|
|
};
|
|
|
|
/*
|
|
* Encryption controls. We can enable or disable encryption as
|
|
* well as specify up to 4 encryption keys. We can also specify
|
|
* which of the four keys will be used for transmit encryption.
|
|
*/
|
|
#define WI_RID_ENCRYPTION 0xFC20
|
|
#define WI_RID_AUTHTYPE 0xFC21
|
|
#define WI_RID_DEFLT_CRYPT_KEYS 0xFCB0
|
|
#define WI_RID_TX_CRYPT_KEY 0xFCB1
|
|
#define WI_RID_WEP_AVAIL 0xFD4F
|
|
#define WI_RID_P2_TX_CRYPT_KEY 0xFC23
|
|
#define WI_RID_P2_CRYPT_KEY0 0xFC24
|
|
#define WI_RID_P2_CRYPT_KEY1 0xFC25
|
|
#define WI_RID_MICROWAVE_OVEN 0xFC25
|
|
#define WI_RID_P2_CRYPT_KEY2 0xFC26
|
|
#define WI_RID_P2_CRYPT_KEY3 0xFC27
|
|
#define WI_RID_P2_ENCRYPTION 0xFC28
|
|
#define WI_RID_ROAMING_MODE 0xFC2D
|
|
#define WI_RID_CUR_TX_RATE 0xFD44 /* current TX rate */
|
|
struct wi_key {
|
|
u_int16_t wi_keylen;
|
|
u_int8_t wi_keydat[14];
|
|
};
|
|
|
|
struct wi_ltv_keys {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
struct wi_key wi_keys[4];
|
|
};
|
|
|
|
struct wi_softc {
|
|
struct arpcom arpcom;
|
|
struct ifmedia ifmedia;
|
|
device_t dev;
|
|
int wi_unit;
|
|
struct resource * local;
|
|
int local_rid;
|
|
struct resource * iobase;
|
|
int iobase_rid;
|
|
struct resource * irq;
|
|
int irq_rid;
|
|
struct resource * mem;
|
|
int mem_rid;
|
|
bus_space_handle_t wi_localhandle;
|
|
bus_space_tag_t wi_localtag;
|
|
bus_space_handle_t wi_bhandle;
|
|
bus_space_tag_t wi_btag;
|
|
bus_space_handle_t wi_bmemhandle;
|
|
bus_space_tag_t wi_bmemtag;
|
|
void * wi_intrhand;
|
|
int wi_io_addr;
|
|
int wi_tx_data_id;
|
|
int wi_tx_mgmt_id;
|
|
int wi_gone;
|
|
int wi_if_flags;
|
|
u_int16_t wi_procframe;
|
|
u_int16_t wi_ptype;
|
|
u_int16_t wi_portnum;
|
|
u_int16_t wi_max_data_len;
|
|
u_int16_t wi_rts_thresh;
|
|
u_int16_t wi_ap_density;
|
|
u_int16_t wi_tx_rate;
|
|
u_int16_t wi_create_ibss;
|
|
u_int16_t wi_channel;
|
|
u_int16_t wi_pm_enabled;
|
|
u_int16_t wi_mor_enabled;
|
|
u_int16_t wi_max_sleep;
|
|
u_int16_t wi_authtype;
|
|
u_int16_t wi_roaming;
|
|
|
|
char wi_node_name[32];
|
|
char wi_net_name[32];
|
|
char wi_ibss_name[32];
|
|
u_int8_t wi_txbuf[1596];
|
|
u_int8_t wi_scanbuf[1596];
|
|
int wi_scanbuf_len;
|
|
struct wi_counters wi_stats;
|
|
int wi_has_wep;
|
|
int wi_use_wep;
|
|
int wi_tx_key;
|
|
struct wi_ltv_keys wi_keys;
|
|
#ifdef WICACHE
|
|
int wi_sigitems;
|
|
struct wi_sigcache wi_sigcache[MAXWICACHE];
|
|
int wi_nextitem;
|
|
#endif
|
|
struct callout_handle wi_stat_ch;
|
|
struct mtx wi_mtx;
|
|
int wi_prism2;
|
|
int wi_firmware_ver;
|
|
int wi_nic_type;
|
|
int wi_bus_type; /* Bus attachment type */
|
|
struct {
|
|
u_int16_t wi_sleep;
|
|
u_int16_t wi_delaysupp;
|
|
u_int16_t wi_txsupp;
|
|
u_int16_t wi_monitor;
|
|
u_int16_t wi_ledtest;
|
|
u_int16_t wi_ledtest_param0;
|
|
u_int16_t wi_ledtest_param1;
|
|
u_int16_t wi_conttx;
|
|
u_int16_t wi_conttx_param0;
|
|
u_int16_t wi_contrx;
|
|
u_int16_t wi_sigstate;
|
|
u_int16_t wi_sigstate_param0;
|
|
u_int16_t wi_confbits;
|
|
u_int16_t wi_confbits_param0;
|
|
} wi_debug;
|
|
|
|
};
|
|
|
|
#define WI_LOCK(_sc)
|
|
#define WI_UNLOCK(_sc)
|
|
|
|
#define WI_DELAY 5
|
|
#define WI_TIMEOUT (500000/WI_DELAY) /* 500 ms */
|
|
|
|
#define WI_PORT0 0
|
|
#define WI_PORT1 1
|
|
#define WI_PORT2 2
|
|
#define WI_PORT3 3
|
|
#define WI_PORT4 4
|
|
#define WI_PORT5 5
|
|
|
|
#define WI_PCI_LMEMRES 0x10 /* PCI Memory (native PCI implementations) */
|
|
#define WI_PCI_LOCALRES 0x14 /* The PLX chip's local registers */
|
|
#define WI_PCI_MEMRES 0x18 /* The PCCard's attribute memory */
|
|
#define WI_PCI_IORES 0x1C /* The PCCard's I/O space */
|
|
|
|
#define WI_LOCAL_INTCSR 0x4c
|
|
#define WI_LOCAL_INTEN 0x40
|
|
#define WI_HFA384X_SWSUPPORT0_OFF 0x28
|
|
#define WI_PRISM2STA_MAGIC 0x4A2D
|
|
#define WI_HFA384X_PCICOR_OFF 0x26
|
|
|
|
/* Default port: 0 (only 0 exists on stations) */
|
|
#define WI_DEFAULT_PORT (WI_PORT0 << 8)
|
|
|
|
/* Default TX rate: 2Mbps, auto fallback */
|
|
#define WI_DEFAULT_TX_RATE 3
|
|
|
|
/* Default network name: empty string implies any */
|
|
#define WI_DEFAULT_NETNAME ""
|
|
|
|
#define WI_DEFAULT_AP_DENSITY 1
|
|
|
|
#define WI_DEFAULT_RTS_THRESH 2347
|
|
|
|
#define WI_DEFAULT_DATALEN 2304
|
|
|
|
#define WI_DEFAULT_CREATE_IBSS 0
|
|
|
|
#define WI_DEFAULT_PM_ENABLED 0
|
|
|
|
#define WI_DEFAULT_MAX_SLEEP 100
|
|
|
|
#define WI_DEFAULT_ROAMING 1
|
|
|
|
#define WI_DEFAULT_AUTHTYPE 1
|
|
|
|
#ifdef __NetBSD__
|
|
#define OS_STRING_NAME "NetBSD"
|
|
#endif
|
|
#ifdef __FreeBSD__
|
|
#define OS_STRING_NAME "FreeBSD"
|
|
#endif
|
|
#ifdef __OpenBSD__
|
|
#define OS_STRING_NAME "OpenBSD"
|
|
#endif
|
|
|
|
#define WI_DEFAULT_NODENAME OS_STRING_NAME " WaveLAN/IEEE node"
|
|
|
|
#define WI_DEFAULT_IBSS OS_STRING_NAME " IBSS"
|
|
|
|
#define WI_DEFAULT_CHAN 3
|
|
|
|
#define WI_BUS_PCCARD 0 /* pccard device */
|
|
#define WI_BUS_PCI_PLX 1 /* PCI card w/ PLX PCI/PCMICA bridge */
|
|
#define WI_BUS_PCI_NATIVE 2 /* native PCI device (Prism 2.5) */
|
|
|
|
/*
|
|
* register space access macros
|
|
*/
|
|
#define CSR_WRITE_4(sc, reg, val) \
|
|
bus_space_write_4((sc)->wi_btag, (sc)->wi_bhandle, \
|
|
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val)
|
|
#define CSR_WRITE_2(sc, reg, val) \
|
|
bus_space_write_2((sc)->wi_btag, (sc)->wi_bhandle, \
|
|
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val)
|
|
#define CSR_WRITE_1(sc, reg, val) \
|
|
bus_space_write_1((sc)->wi_btag, (sc)->wi_bhandle, \
|
|
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg), val)
|
|
|
|
#define CSR_READ_4(sc, reg) \
|
|
bus_space_read_4((sc)->wi_btag, (sc)->wi_bhandle, \
|
|
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg))
|
|
#define CSR_READ_2(sc, reg) \
|
|
bus_space_read_2((sc)->wi_btag, (sc)->wi_bhandle, \
|
|
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg))
|
|
#define CSR_READ_1(sc, reg) \
|
|
bus_space_read_1((sc)->wi_btag, (sc)->wi_bhandle, \
|
|
(sc)->wi_bus_type == WI_BUS_PCI_NATIVE ? (reg)*2 : (reg))
|
|
|
|
#define CSM_WRITE_1(sc, off, val) \
|
|
bus_space_write_1((sc)->wi_bmemtag, (sc)->wi_bmemhandle, off, val)
|
|
|
|
#define CSM_READ_1(sc, off) \
|
|
bus_space_read_1((sc)->wi_bmemtag, (sc)->wi_bmemhandle, off)
|
|
|
|
/*
|
|
* The WaveLAN/IEEE cards contain an 802.11 MAC controller which Lucent
|
|
* calls 'Hermes.' In typical fashion, getting documentation about this
|
|
* controller is about as easy as squeezing blood from a stone. Here
|
|
* is more or less what I know:
|
|
*
|
|
* - The Hermes controller is firmware driven, and the host interacts
|
|
* with the Hermes via a firmware interface, which can change.
|
|
*
|
|
* - The Hermes is described in a document called: "Hermes Firmware
|
|
* WaveLAN/IEEE Station Functions," document #010245, which of course
|
|
* Lucent will not release without an NDA.
|
|
*
|
|
* - Lucent has created a library called HCF (Hardware Control Functions)
|
|
* though which it wants developers to interact with the card. The HCF
|
|
* is needlessly complex, ill conceived and badly documented. Actually,
|
|
* the comments in the HCP code itself aren't bad, but the publically
|
|
* available manual that comes with it is awful, probably due largely to
|
|
* the fact that it has been emasculated in order to hide information
|
|
* that Lucent wants to keep proprietary. The purpose of the HCF seems
|
|
* to be to insulate the driver programmer from the Hermes itself so that
|
|
* Lucent has an excuse not to release programming in for it.
|
|
*
|
|
* - Lucent only makes available documentation and code for 'HCF Light'
|
|
* which is a stripped down version of HCF with certain features not
|
|
* implemented, most notably support for 802.11 frames.
|
|
*
|
|
* - The HCF code which I have seen blows goats. Whoever decided to
|
|
* use a 132 column format should be shot.
|
|
*
|
|
* Rather than actually use the Lucent HCF library, I have stripped all
|
|
* the useful information from it and used it to create a driver in the
|
|
* usual BSD form. Note: I don't want to hear anybody whining about the
|
|
* fact that the Lucent code is GPLed and mine isn't. I did not actually
|
|
* put any of Lucent's code in this driver: I only used it as a reference
|
|
* to obtain information about the underlying hardware. The Hermes
|
|
* programming interface is not GPLed, so bite me.
|
|
*/
|
|
|
|
/*
|
|
* Size of Hermes I/O space.
|
|
*/
|
|
#define WI_IOSIZ 0x40
|
|
|
|
/*
|
|
* Hermes register definitions and what little I know about them.
|
|
*/
|
|
|
|
/* Hermes command/status registers. */
|
|
#define WI_COMMAND 0x00
|
|
#define WI_PARAM0 0x02
|
|
#define WI_PARAM1 0x04
|
|
#define WI_PARAM2 0x06
|
|
#define WI_STATUS 0x08
|
|
#define WI_RESP0 0x0A
|
|
#define WI_RESP1 0x0C
|
|
#define WI_RESP2 0x0E
|
|
|
|
/* Command register values. */
|
|
#define WI_CMD_BUSY 0x8000 /* busy bit */
|
|
#define WI_CMD_INI 0x0000 /* initialize */
|
|
#define WI_CMD_ENABLE 0x0001 /* enable */
|
|
#define WI_CMD_DISABLE 0x0002 /* disable */
|
|
#define WI_CMD_DIAG 0x0003
|
|
#define WI_CMD_ALLOC_MEM 0x000A /* allocate NIC memory */
|
|
#define WI_CMD_TX 0x000B /* transmit */
|
|
#define WI_CMD_NOTIFY 0x0010
|
|
#define WI_CMD_INQUIRE 0x0011
|
|
#define WI_CMD_ACCESS 0x0021
|
|
#define WI_CMD_PROGRAM 0x0022
|
|
|
|
#define WI_CMD_CODE_MASK 0x003F
|
|
|
|
/*
|
|
* Reclaim qualifier bit, applicable to the
|
|
* TX and INQUIRE commands.
|
|
*/
|
|
#define WI_RECLAIM 0x0100 /* reclaim NIC memory */
|
|
|
|
/*
|
|
* ACCESS command qualifier bits.
|
|
*/
|
|
#define WI_ACCESS_READ 0x0000
|
|
#define WI_ACCESS_WRITE 0x0100
|
|
|
|
/*
|
|
* PROGRAM command qualifier bits.
|
|
*/
|
|
#define WI_PROGRAM_DISABLE 0x0000
|
|
#define WI_PROGRAM_ENABLE_RAM 0x0100
|
|
#define WI_PROGRAM_ENABLE_NVRAM 0x0200
|
|
#define WI_PROGRAM_NVRAM 0x0300
|
|
|
|
/* Status register values */
|
|
#define WI_STAT_CMD_CODE 0x003F
|
|
#define WI_STAT_DIAG_ERR 0x0100
|
|
#define WI_STAT_INQ_ERR 0x0500
|
|
#define WI_STAT_CMD_RESULT 0x7F00
|
|
|
|
/* memory handle management registers */
|
|
#define WI_INFO_FID 0x10
|
|
#define WI_RX_FID 0x20
|
|
#define WI_ALLOC_FID 0x22
|
|
#define WI_TX_CMP_FID 0x24
|
|
|
|
/*
|
|
* Buffer Access Path (BAP) registers.
|
|
* These are I/O channels. I believe you can use each one for
|
|
* any desired purpose independently of the other. In general
|
|
* though, we use BAP1 for reading and writing LTV records and
|
|
* reading received data frames, and BAP0 for writing transmit
|
|
* frames. This is a convention though, not a rule.
|
|
*/
|
|
#define WI_SEL0 0x18
|
|
#define WI_SEL1 0x1A
|
|
#define WI_OFF0 0x1C
|
|
#define WI_OFF1 0x1E
|
|
#define WI_DATA0 0x36
|
|
#define WI_DATA1 0x38
|
|
#define WI_BAP0 WI_DATA0
|
|
#define WI_BAP1 WI_DATA1
|
|
|
|
#define WI_OFF_BUSY 0x8000
|
|
#define WI_OFF_ERR 0x4000
|
|
#define WI_OFF_DATAOFF 0x0FFF
|
|
|
|
/* Event registers */
|
|
#define WI_EVENT_STAT 0x30 /* Event status */
|
|
#define WI_INT_EN 0x32 /* Interrupt enable/disable */
|
|
#define WI_EVENT_ACK 0x34 /* Ack event */
|
|
|
|
/* Events */
|
|
#define WI_EV_TICK 0x8000 /* aux timer tick */
|
|
#define WI_EV_RES 0x4000 /* controller h/w error (time out) */
|
|
#define WI_EV_INFO_DROP 0x2000 /* no RAM to build unsolicited frame */
|
|
#define WI_EV_NO_CARD 0x0800 /* card removed (hunh?) */
|
|
#define WI_EV_DUIF_RX 0x0400 /* wavelan management packet received */
|
|
#define WI_EV_INFO 0x0080 /* async info frame */
|
|
#define WI_EV_CMD 0x0010 /* command completed */
|
|
#define WI_EV_ALLOC 0x0008 /* async alloc/reclaim completed */
|
|
#define WI_EV_TX_EXC 0x0004 /* async xmit completed with failure */
|
|
#define WI_EV_TX 0x0002 /* async xmit completed succesfully */
|
|
#define WI_EV_RX 0x0001 /* async rx completed */
|
|
|
|
#define WI_INTRS \
|
|
(WI_EV_RX|WI_EV_TX|WI_EV_TX_EXC|WI_EV_ALLOC|WI_EV_INFO|WI_EV_INFO_DROP)
|
|
|
|
/* Host software registers */
|
|
#define WI_SW0 0x28
|
|
#define WI_SW1 0x2A
|
|
#define WI_SW2 0x2C
|
|
#define WI_SW3 0x2E
|
|
|
|
#define WI_CNTL 0x14
|
|
|
|
#define WI_CNTL_AUX_ENA 0xC000
|
|
#define WI_CNTL_AUX_ENA_STAT 0xC000
|
|
#define WI_CNTL_AUX_DIS_STAT 0x0000
|
|
#define WI_CNTL_AUX_ENA_CNTL 0x8000
|
|
#define WI_CNTL_AUX_DIS_CNTL 0x4000
|
|
|
|
#define WI_AUX_PAGE 0x3A
|
|
#define WI_AUX_OFFSET 0x3C
|
|
#define WI_AUX_DATA 0x3E
|
|
|
|
#define WI_COR_OFFSET 0x3e0
|
|
#define WI_COR_VALUE 0x41
|
|
|
|
/*
|
|
* One form of communication with the Hermes is with what Lucent calls
|
|
* LTV records, where LTV stands for Length, Type and Value. The length
|
|
* and type are 16 bits and are in native byte order. The value is in
|
|
* multiples of 16 bits and is in little endian byte order.
|
|
*/
|
|
struct wi_ltv_gen {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_val;
|
|
};
|
|
|
|
struct wi_ltv_str {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_str[17];
|
|
};
|
|
|
|
#define WI_SETVAL(recno, val) \
|
|
do { \
|
|
struct wi_ltv_gen g; \
|
|
\
|
|
g.wi_len = 2; \
|
|
g.wi_type = recno; \
|
|
g.wi_val = val; \
|
|
wi_write_record(sc, &g); \
|
|
} while (0)
|
|
|
|
#define WI_SETSTR(recno, str) \
|
|
do { \
|
|
struct wi_ltv_str s; \
|
|
int l; \
|
|
\
|
|
l = (strlen(str) + 1) & ~0x1; \
|
|
bzero((char *)&s, sizeof(s)); \
|
|
s.wi_len = (l / 2) + 2; \
|
|
s.wi_type = recno; \
|
|
s.wi_str[0] = strlen(str); \
|
|
bcopy(str, (char *)&s.wi_str[1], strlen(str)); \
|
|
wi_write_record(sc, (struct wi_ltv_gen *)&s); \
|
|
} while (0)
|
|
|
|
/*
|
|
* Download buffer location and length (0xFD01).
|
|
*/
|
|
#define WI_RID_DNLD_BUF 0xFD01
|
|
struct wi_ltv_dnld_buf {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_buf_pg; /* page addr of intermediate dl buf*/
|
|
u_int16_t wi_buf_off; /* offset of idb */
|
|
u_int16_t wi_buf_len; /* len of idb */
|
|
};
|
|
|
|
/*
|
|
* Mem sizes (0xFD02).
|
|
*/
|
|
#define WI_RID_MEMSZ 0xFD02
|
|
struct wi_ltv_memsz {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_mem_ram;
|
|
u_int16_t wi_mem_nvram;
|
|
};
|
|
|
|
/*
|
|
* NIC Identification (0xFD0B)
|
|
*/
|
|
#define WI_RID_CARDID 0xFD0B
|
|
struct wi_ltv_ver {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_ver[4];
|
|
#define WI_NIC_LUCENT 0x0001 /* Emperically derived */
|
|
#define WI_NIC_LUCENT_ALT 0x0005 /* Emperically derived */
|
|
#define WI_NIC_EVB2 0x8000
|
|
#define WI_NIC_HWB3763 0x8001
|
|
#define WI_NIC_HWB3163 0x8002
|
|
#define WI_NIC_HWB3163B 0x8003
|
|
#define WI_NIC_EVB3 0x8004
|
|
#define WI_NIC_HWB1153 0x8007
|
|
#define WI_NIC_P2_SST 0x8008 /* Prism2 with SST flush */
|
|
#define WI_NIC_PRISM2_5 0x800C
|
|
#define WI_NIC_3874A 0x8013 /* Prism2.5 Mini-PCI */
|
|
};
|
|
|
|
/*
|
|
* List of intended regulatory domains (0xFD11).
|
|
*/
|
|
#define WI_RID_DOMAINS 0xFD11
|
|
struct wi_ltv_domains {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_domains[6];
|
|
};
|
|
|
|
/*
|
|
* CIS struct (0xFD13).
|
|
*/
|
|
#define WI_RID_CIS 0xFD13
|
|
struct wi_ltv_cis {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_cis[240];
|
|
};
|
|
|
|
/*
|
|
* Communications quality (0xFD43).
|
|
*/
|
|
#define WI_RID_COMMQUAL 0xFD43
|
|
struct wi_ltv_commqual {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_coms_qual;
|
|
u_int16_t wi_sig_lvl;
|
|
u_int16_t wi_noise_lvl;
|
|
};
|
|
|
|
/*
|
|
* Actual system scale thresholds (0xFD46).
|
|
*/
|
|
#define WI_RID_SYSTEM_SCALE 0xFC06
|
|
#define WI_RID_SCALETHRESH 0xFD46
|
|
struct wi_ltv_scalethresh {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_energy_detect;
|
|
u_int16_t wi_carrier_detect;
|
|
u_int16_t wi_defer;
|
|
u_int16_t wi_cell_search;
|
|
u_int16_t wi_out_of_range;
|
|
u_int16_t wi_delta_snr;
|
|
};
|
|
|
|
/*
|
|
* PCF info struct (0xFD87).
|
|
*/
|
|
#define WI_RID_PCF 0xFD87
|
|
struct wi_ltv_pcf {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_energy_detect;
|
|
u_int16_t wi_carrier_detect;
|
|
u_int16_t wi_defer;
|
|
u_int16_t wi_cell_search;
|
|
u_int16_t wi_range;
|
|
};
|
|
|
|
/*
|
|
* Connection control characteristics.
|
|
* 1 == Basic Service Set (BSS)
|
|
* 2 == Wireless Distribudion System (WDS)
|
|
* 3 == Pseudo IBSS
|
|
*/
|
|
#define WI_RID_PORTTYPE 0xFC00
|
|
#define WI_PORTTYPE_BSS 0x1
|
|
#define WI_PORTTYPE_WDS 0x2
|
|
#define WI_PORTTYPE_ADHOC 0x3
|
|
|
|
/*
|
|
* Mac addresses.
|
|
*/
|
|
#define WI_RID_MAC_NODE 0xFC01
|
|
#define WI_RID_MAC_WDS 0xFC08
|
|
struct wi_ltv_macaddr {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_mac_addr[3];
|
|
};
|
|
|
|
/*
|
|
* Station set identification (SSID).
|
|
*/
|
|
#define WI_RID_DESIRED_SSID 0xFC02
|
|
#define WI_RID_OWN_SSID 0xFC04
|
|
struct wi_ltv_ssid {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_id[17];
|
|
};
|
|
|
|
/*
|
|
* Set communications channel (radio frequency).
|
|
*/
|
|
#define WI_RID_OWN_CHNL 0xFC03
|
|
|
|
/*
|
|
* Frame data size.
|
|
*/
|
|
#define WI_RID_MAX_DATALEN 0xFC07
|
|
|
|
/*
|
|
* ESS power management enable
|
|
*/
|
|
#define WI_RID_PM_ENABLED 0xFC09
|
|
|
|
/*
|
|
* ESS max PM sleep internal
|
|
*/
|
|
#define WI_RID_MAX_SLEEP 0xFC0C
|
|
|
|
/*
|
|
* Set our station name.
|
|
*/
|
|
#define WI_RID_NODENAME 0xFC0E
|
|
struct wi_ltv_nodename {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
u_int16_t wi_nodename[17];
|
|
};
|
|
|
|
#define WI_RID_AUTH_CNTL 0xFC2A
|
|
|
|
/*
|
|
* Multicast addresses to be put in filter. We're
|
|
* allowed up to 16 addresses in the filter.
|
|
*/
|
|
#define WI_RID_MCAST 0xFC80
|
|
struct wi_ltv_mcast {
|
|
u_int16_t wi_len;
|
|
u_int16_t wi_type;
|
|
struct ether_addr wi_mcast[16];
|
|
};
|
|
|
|
/*
|
|
* Create IBSS.
|
|
*/
|
|
#define WI_RID_CREATE_IBSS 0xFC81
|
|
|
|
#define WI_RID_FRAG_THRESH 0xFC82
|
|
#define WI_RID_RTS_THRESH 0xFC83
|
|
|
|
/*
|
|
* TX rate control
|
|
* 0 == Fixed 1mbps
|
|
* 1 == Fixed 2mbps
|
|
* 2 == auto fallback
|
|
*/
|
|
#define WI_RID_TX_RATE 0xFC84
|
|
|
|
/*
|
|
* promiscuous mode.
|
|
*/
|
|
#define WI_RID_PROMISC 0xFC85
|
|
|
|
/*
|
|
* Auxiliary Timer tick interval
|
|
*/
|
|
#define WI_RID_TICK_TIME 0xFCE0
|
|
|
|
/*
|
|
* Information frame types.
|
|
*/
|
|
#define WI_INFO_NOTIFY 0xF000 /* Handover address */
|
|
#define WI_INFO_COUNTERS 0xF100 /* Statistics counters */
|
|
#define WI_INFO_SCAN_RESULTS 0xF101 /* Scan results */
|
|
#define WI_INFO_LINK_STAT 0xF200 /* Link status */
|
|
#define WI_INFO_ASSOC_STAT 0xF201 /* Association status */
|
|
|
|
/*
|
|
* Hermes transmit/receive frame structure
|
|
*/
|
|
struct wi_frame {
|
|
u_int16_t wi_status; /* 0x00 */
|
|
u_int16_t wi_rsvd0; /* 0x02 */
|
|
u_int16_t wi_rsvd1; /* 0x04 */
|
|
u_int16_t wi_q_info; /* 0x06 */
|
|
u_int16_t wi_rsvd2; /* 0x08 */
|
|
u_int16_t wi_rsvd3; /* 0x0A */
|
|
u_int16_t wi_tx_ctl; /* 0x0C */
|
|
u_int16_t wi_frame_ctl; /* 0x0E */
|
|
u_int16_t wi_id; /* 0x10 */
|
|
u_int8_t wi_addr1[6]; /* 0x12 */
|
|
u_int8_t wi_addr2[6]; /* 0x18 */
|
|
u_int8_t wi_addr3[6]; /* 0x1E */
|
|
u_int16_t wi_seq_ctl; /* 0x24 */
|
|
u_int8_t wi_addr4[6]; /* 0x26 */
|
|
u_int16_t wi_dat_len; /* 0x2C */
|
|
u_int8_t wi_dst_addr[6]; /* 0x2E */
|
|
u_int8_t wi_src_addr[6]; /* 0x34 */
|
|
u_int16_t wi_len; /* 0x3A */
|
|
u_int16_t wi_dat[3]; /* 0x3C */ /* SNAP header */
|
|
u_int16_t wi_type; /* 0x42 */
|
|
};
|
|
|
|
#define WI_802_3_OFFSET 0x2E
|
|
#define WI_802_11_OFFSET 0x44
|
|
#define WI_802_11_OFFSET_RAW 0x3C
|
|
|
|
#define WI_STAT_BADCRC 0x0001
|
|
#define WI_STAT_UNDECRYPTABLE 0x0002
|
|
#define WI_STAT_ERRSTAT 0x0003
|
|
#define WI_STAT_MAC_PORT 0x0700
|
|
#define WI_STAT_1042 0x2000 /* RFC1042 encoded */
|
|
#define WI_STAT_TUNNEL 0x4000 /* Bridge-tunnel encoded */
|
|
#define WI_STAT_WMP_MSG 0x6000 /* WaveLAN-II management protocol */
|
|
#define WI_RXSTAT_MSG_TYPE 0xE000
|
|
|
|
#define WI_ENC_TX_802_3 0x00
|
|
#define WI_ENC_TX_802_11 0x11
|
|
#define WI_ENC_TX_E_II 0x0E
|
|
|
|
#define WI_ENC_TX_1042 0x00
|
|
#define WI_ENC_TX_TUNNEL 0xF8
|
|
|
|
#define WI_TXCNTL_MACPORT 0x00FF
|
|
#define WI_TXCNTL_STRUCTTYPE 0xFF00
|
|
|
|
/*
|
|
* SNAP (sub-network access protocol) constants for transmission
|
|
* of IP datagrams over IEEE 802 networks, taken from RFC1042.
|
|
* We need these for the LLC/SNAP header fields in the TX/RX frame
|
|
* structure.
|
|
*/
|
|
#define WI_SNAP_K1 0xaa /* assigned global SAP for SNAP */
|
|
#define WI_SNAP_K2 0x00
|
|
#define WI_SNAP_CONTROL 0x03 /* unnumbered information format */
|
|
#define WI_SNAP_WORD0 (WI_SNAP_K1 | (WI_SNAP_K1 << 8))
|
|
#define WI_SNAP_WORD1 (WI_SNAP_K2 | (WI_SNAP_CONTROL << 8))
|
|
#define WI_SNAPHDR_LEN 0x6
|