loos 8b84661d1f Add an iicbus_reset() method to bcm2835_bsc. While it is generally not ... used for kernel devices it is used by i2c(8). This fix the 'error: Device not configured' when i2c(8) tries to reset the controller, as an example: # i2c -r Resetting I2C controller on /dev/iic0: error: Device not configured For now use conservative settings for default i2c speeds. MFC after: 1 week		2014-10-24 22:06:21 +00:00
..
bcm2835_bsc.c	Add an iicbus_reset() method to bcm2835_bsc. While it is generally not	2014-10-24 22:06:21 +00:00
bcm2835_bscreg.h	Add the Raspberry Pi BSC (I2C compliant) controller driver.	2013-10-23 12:29:39 +00:00
bcm2835_bscvar.h	Add an iicbus_reset() method to bcm2835_bsc. While it is generally not	2014-10-24 22:06:21 +00:00
bcm2835_common.c	Move all the files named foo/common.c to foo/foo_common.c, as	2014-03-08 00:14:40 +00:00
bcm2835_dma.c	Follow r261352 by updating all drivers which are children of simplebus	2014-02-02 19:17:28 +00:00
bcm2835_dma.h	Add driver for BCM2835's DMA engine	2013-02-28 19:48:19 +00:00
bcm2835_fb.c	Move Open Firmware device root on PowerPC, ARM, and MIPS systems to	2014-02-05 14:44:22 +00:00
bcm2835_fbd.c	Remove extra newlines.	2014-05-14 11:15:48 +00:00
bcm2835_gpio.c	Allow the use of the OFW GPIO bus for ti_gpio and bcm2835_gpio. With this	2014-02-13 18:42:23 +00:00
bcm2835_gpio.h	Export a function to allow BCM2835's peripheral devices to enable their	2013-09-07 18:48:15 +00:00
bcm2835_intr.c	Optimise reading of pending interrupt registers. If there are no	2014-05-20 15:03:23 +00:00
bcm2835_machdep.c	Add the start of the ARM platform code. This is based on the PowerPC	2014-05-17 11:27:36 +00:00
bcm2835_mbox.c	Correct the order of arguments to mtx_init().	2014-02-14 11:18:15 +00:00
bcm2835_mbox.h	Convert bcm2835_mbox to the new mbox interface.	2013-07-07 21:23:58 +00:00
bcm2835_sdhci.c	Add a workaround needed to fix a bug of Arasan Host Controller where it may	2014-10-18 19:01:07 +00:00
bcm2835_spi.c	Follow r261352 by updating all drivers which are children of simplebus	2014-02-02 19:17:28 +00:00
bcm2835_spireg.h	Add the Raspberry Pi SPI controller driver.	2013-10-24 16:27:33 +00:00
bcm2835_spivar.h	Add the Raspberry Pi SPI controller driver.	2013-10-24 16:27:33 +00:00
bcm2835_systimer.c	Replace many pasted identical definitions of cpu_initclocks() with a common	2014-02-26 22:06:10 +00:00
bcm2835_vcbus.h	Add macroses to properly map IO peripherals memory window from	2013-02-23 22:46:26 +00:00
bcm2835_wdog.c	Follow r261352 by updating all drivers which are children of simplebus	2014-02-02 19:17:28 +00:00
bcm2835_wdog.h
files.bcm2835	Factor out kernel configuration for DWC OTG FDT attach code.	2014-05-29 11:13:40 +00:00
std.bcm2835	Move the Raspberry Pi low level options out of the kernel config and into	2013-07-15 07:01:30 +00:00
std.rpi	Remove STARTUP_PAGETABLE_ADDR from the ARM configs and replace it with	2014-01-28 09:12:04 +00:00