freebsd-skq/sys/pci/if_vrreg.h
wpaul 8d57d11ab2 Tweak the vr_start() and vr_rxeof() routines a little to improve
performance and reliability a little. There was a condition before
where transmission would stall during periods of heavy traffic
exchange between two hosts. Also set the 'want interrupt' bit in
receive descriptor control words.
1999-01-10 18:51:49 +00:00

617 lines
18 KiB
C

/*
* Copyright (c) 1997, 1998
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: if_vrreg.h,v 1.9 1999/01/10 18:06:10 wpaul Exp $
*/
/*
* Rhine register definitions.
*/
#define VR_PAR0 0x00 /* node address 0 to 4 */
#define VR_PAR1 0x04 /* node address 2 to 6 */
#define VR_RXCFG 0x06 /* receiver config register */
#define VR_TXCFG 0x07 /* transmit config register */
#define VR_COMMAND 0x08 /* command register */
#define VR_ISR 0x0C /* interrupt/status register */
#define VR_IMR 0x0E /* interrupt mask register */
#define VR_MAR0 0x10 /* multicast hash 0 */
#define VR_MAR1 0x14 /* multicast hash 1 */
#define VR_RXADDR 0x18 /* rx descriptor list start addr */
#define VR_TXADDR 0x1C /* tx descriptor list start addr */
#define VR_CURRXDESC0 0x20
#define VR_CURRXDESC1 0x24
#define VR_CURRXDESC2 0x28
#define VR_CURRXDESC3 0x2C
#define VR_NEXTRXDESC0 0x30
#define VR_NEXTRXDESC1 0x34
#define VR_NEXTRXDESC2 0x38
#define VR_NEXTRXDESC3 0x3C
#define VR_CURTXDESC0 0x40
#define VR_CURTXDESC1 0x44
#define VR_CURTXDESC2 0x48
#define VR_CURTXDESC3 0x4C
#define VR_NEXTTXDESC0 0x50
#define VR_NEXTTXDESC1 0x54
#define VR_NEXTTXDESC2 0x58
#define VR_NEXTTXDESC3 0x5C
#define VR_CURRXDMA 0x60 /* current RX DMA address */
#define VR_CURTXDMA 0x64 /* current TX DMA address */
#define VR_TALLYCNT 0x68 /* tally counter test register */
#define VR_PHYADDR 0x6C
#define VR_MIISTAT 0x6D
#define VR_BCR0 0x6E
#define VR_BCR1 0x6F
#define VR_MIICMD 0x70
#define VR_MIIADDR 0x71
#define VR_MIIDATA 0x72
#define VR_EECSR 0x74
#define VR_TEST 0x75
#define VR_GPIO 0x76
#define VR_CONFIG 0x78
#define VR_MPA_CNT 0x7C
#define VR_CRC_CNT 0x7E
/*
* RX config bits.
*/
#define VR_RXCFG_RX_ERRPKTS 0x01
#define VR_RXCFG_RX_RUNT 0x02
#define VR_RXCFG_RX_MULTI 0x04
#define VR_RXCFG_RX_BROAD 0x08
#define VR_RXCFG_RX_PROMISC 0x10
#define VR_RXCFG_RX_THRESH 0xE0
#define VR_RXTHRESH_32BYTES 0x00
#define VR_RXTHRESH_64BYTES 0x20
#define VR_RXTHRESH_128BYTES 0x40
#define VR_RXTHRESH_256BYTES 0x60
#define VR_RXTHRESH_512BYTES 0x80
#define VR_RXTHRESH_768BYTES 0xA0
#define VR_RXTHRESH_1024BYTES 0xC0
#define VR_RXTHRESH_STORENFWD 0xE0
/*
* TX config bits.
*/
#define VR_TXCFG_RSVD0 0x01
#define VR_TXCFG_LOOPBKMODE 0x06
#define VR_TXCFG_BACKOFF 0x08
#define VR_TXCFG_RSVD1 0x10
#define VR_TXCFG_TX_THRESH 0xE0
#define VR_TXTHRESH_32BYTES 0x00
#define VR_TXTHRESH_64BYTES 0x20
#define VR_TXTHRESH_128BYTES 0x40
#define VR_TXTHRESH_256BYTES 0x60
#define VR_TXTHRESH_512BYTES 0x80
#define VR_TXTHRESH_768BYTES 0xA0
#define VR_TXTHRESH_1024BYTES 0xC0
#define VR_TXTHRESH_STORENFWD 0xE0
/*
* Command register bits.
*/
#define VR_CMD_INIT 0x0001
#define VR_CMD_START 0x0002
#define VR_CMD_STOP 0x0004
#define VR_CMD_RX_ON 0x0008
#define VR_CMD_TX_ON 0x0010
#define VR_CMD_TX_GO 0x0020
#define VR_CMD_RX_GO 0x0040
#define VR_CMD_RSVD 0x0080
#define VR_CMD_RX_EARLY 0x0100
#define VR_CMD_TX_EARLY 0x0200
#define VR_CMD_FULLDUPLEX 0x0400
#define VR_CMD_TX_NOPOLL 0x0800
#define VR_CMD_RESET 0x8000
/*
* Interrupt status bits.
*/
#define VR_ISR_RX_OK 0x0001 /* packet rx ok */
#define VR_ISR_TX_OK 0x0002 /* packet tx ok */
#define VR_ISR_RX_ERR 0x0004 /* packet rx with err */
#define VR_ISR_TX_ABRT 0x0008 /* tx aborted due to excess colls */
#define VR_ISR_TX_UNDERRUN 0x0010 /* tx buffer underflow */
#define VR_ISR_RX_NOBUF 0x0020 /* no rx buffer available */
#define VR_ISR_BUSERR 0x0040 /* PCI bus error */
#define VR_ISR_STATSOFLOW 0x0080 /* stats counter oflow */
#define VR_ISR_RX_EARLY 0x0100 /* rx early */
#define VR_ISR_LINKSTAT 0x0200 /* MII status change */
#define VR_ISR_RX_OFLOW 0x0400 /* rx FIFO overflow */
#define VR_ISR_RX_DROPPED 0x0800
#define VR_ISR_RX_NOBUF2 0x1000
#define VR_ISR_TX_ABRT2 0x2000
#define VR_ISR_LINKSTAT2 0x4000
#define VR_ISR_MAGICPACKET 0x8000
/*
* Interrupt mask bits.
*/
#define VR_IMR_RX_OK 0x0001 /* packet rx ok */
#define VR_IMR_TX_OK 0x0002 /* packet tx ok */
#define VR_IMR_RX_ERR 0x0004 /* packet rx with err */
#define VR_IMR_TX_ABRT 0x0008 /* tx aborted due to excess colls */
#define VR_IMR_TX_UNDERRUN 0x0010 /* tx buffer underflow */
#define VR_IMR_RX_NOBUF 0x0020 /* no rx buffer available */
#define VR_IMR_BUSERR 0x0040 /* PCI bus error */
#define VR_IMR_STATSOFLOW 0x0080 /* stats counter oflow */
#define VR_IMR_RX_EARLY 0x0100 /* rx early */
#define VR_IMR_LINKSTAT 0x0200 /* MII status change */
#define VR_IMR_RX_OFLOW 0x0400 /* rx FIFO overflow */
#define VR_IMR_RX_DROPPED 0x0800
#define VR_IMR_RX_NOBUF2 0x1000
#define VR_IMR_TX_ABRT2 0x2000
#define VR_IMR_LINKSTAT2 0x4000
#define VR_IMR_MAGICPACKET 0x8000
#define VR_INTRS \
(VR_IMR_RX_OK|VR_IMR_TX_OK|VR_IMR_RX_NOBUF| \
VR_IMR_TX_ABRT|VR_IMR_TX_UNDERRUN|VR_IMR_BUSERR| \
VR_IMR_RX_ERR|VR_ISR_RX_DROPPED)
/*
* MII status register.
*/
#define VR_MIISTAT_SPEED 0x01
#define VR_MIISTAT_LINKFAULT 0x02
#define VR_MIISTAT_MGTREADERR 0x04
#define VR_MIISTAT_MIIERR 0x08
#define VR_MIISTAT_PHYOPT 0x10
#define VR_MIISTAT_MDC_SPEED 0x20
#define VR_MIISTAT_RSVD 0x40
#define VR_MIISTAT_GPIO1POLL 0x80
/*
* MII command register bits.
*/
#define VR_MIICMD_CLK 0x01
#define VR_MIICMD_DATAOUT 0x02
#define VR_MIICMD_DATAIN 0x04
#define VR_MIICMD_DIR 0x08
#define VR_MIICMD_DIRECTPGM 0x10
#define VR_MIICMD_WRITE_ENB 0x20
#define VR_MIICMD_READ_ENB 0x40
#define VR_MIICMD_AUTOPOLL 0x80
/*
* EEPROM control bits.
*/
#define VR_EECSR_DATAIN 0x01 /* data out */
#define VR_EECSR_DATAOUT 0x02 /* data in */
#define VR_EECSR_CLK 0x04 /* clock */
#define VR_EECSR_CS 0x08 /* chip select */
#define VR_EECSR_DPM 0x10
#define VR_EECSR_LOAD 0x20
#define VR_EECSR_EMBP 0x40
#define VR_EECSR_EEPR 0x80
#define VR_EECMD_WRITE 0x140
#define VR_EECMD_READ 0x180
#define VR_EECMD_ERASE 0x1c0
/*
* Test register bits.
*/
#define VR_TEST_TEST0 0x01
#define VR_TEST_TEST1 0x02
#define VR_TEST_TEST2 0x04
#define VR_TEST_TSTUD 0x08
#define VR_TEST_TSTOV 0x10
#define VR_TEST_BKOFF 0x20
#define VR_TEST_FCOL 0x40
#define VR_TEST_HBDES 0x80
/*
* Config register bits.
*/
#define VR_CFG_GPIO2OUTENB 0x00000001
#define VR_CFG_GPIO2OUT 0x00000002 /* gen. purp. pin */
#define VR_CFG_GPIO2IN 0x00000004 /* gen. purp. pin */
#define VR_CFG_AUTOOPT 0x00000008 /* enable rx/tx autopoll */
#define VR_CFG_MIIOPT 0x00000010
#define VR_CFG_MMIENB 0x00000020 /* memory mapped mode enb */
#define VR_CFG_JUMPER 0x00000040 /* PHY and oper. mode select */
#define VR_CFG_EELOAD 0x00000080 /* enable EEPROM programming */
#define VR_CFG_LATMENB 0x00000100 /* larency timer effect enb. */
#define VR_CFG_MRREADWAIT 0x00000200
#define VR_CFG_MRWRITEWAIT 0x00000400
#define VR_CFG_RX_ARB 0x00000800
#define VR_CFG_TX_ARB 0x00001000
#define VR_CFG_READMULTI 0x00002000
#define VR_CFG_TX_PACE 0x00004000
#define VR_CFG_TX_QDIS 0x00008000
#define VR_CFG_ROMSEL0 0x00010000
#define VR_CFG_ROMSEL1 0x00020000
#define VR_CFG_ROMSEL2 0x00040000
#define VR_CFG_ROMTIMESEL 0x00080000
#define VR_CFG_RSVD0 0x00100000
#define VR_CFG_ROMDLY 0x00200000
#define VR_CFG_ROMOPT 0x00400000
#define VR_CFG_RSVD1 0x00800000
#define VR_CFG_BACKOFFOPT 0x01000000
#define VR_CFG_BACKOFFMOD 0x02000000
#define VR_CFG_CAPEFFECT 0x04000000
#define VR_CFG_BACKOFFRAND 0x08000000
#define VR_CFG_MAGICKPACKET 0x10000000
#define VR_CFG_PCIREADLINE 0x20000000
#define VR_CFG_DIAG 0x40000000
#define VR_CFG_GPIOEN 0x80000000
/*
* Rhine TX/RX list structure.
*/
struct vr_desc {
u_int32_t vr_status;
u_int32_t vr_ctl;
u_int32_t vr_ptr1;
u_int32_t vr_ptr2;
};
#define vr_data vr_ptr1
#define vr_next vr_ptr2
#define VR_RXSTAT_RXERR 0x00000001
#define VR_RXSTAT_CRCERR 0x00000002
#define VR_RXSTAT_FRAMEALIGNERR 0x00000004
#define VR_RXSTAT_FIFOOFLOW 0x00000008
#define VR_RXSTAT_GIANT 0x00000010
#define VR_RXSTAT_RUNT 0x00000020
#define VR_RXSTAT_BUSERR 0x00000040
#define VR_RXSTAT_BUFFERR 0x00000080
#define VR_RXSTAT_LASTFRAG 0x00000100
#define VR_RXSTAT_FIRSTFRAG 0x00000200
#define VR_RXSTAT_RLINK 0x00000400
#define VR_RXSTAT_RX_PHYS 0x00000800
#define VR_RXSTAT_RX_BROAD 0x00001000
#define VR_RXSTAT_RX_MULTI 0x00002000
#define VR_RXSTAT_RX_OK 0x00004000
#define VR_RXSTAT_RXLEN 0x07FF0000
#define VR_RXSTAT_RXLEN_EXT 0x78000000
#define VR_RXSTAT_OWN 0x80000000
#define VR_RXBYTES(x) ((x & VR_RXSTAT_RXLEN) >> 16)
#define VR_RXSTAT (VR_RXSTAT_FIRSTFRAG|VR_RXSTAT_LASTFRAG|VR_RXSTAT_OWN)
#define VR_RXCTL_BUFLEN 0x000007FF
#define VR_RXCTL_BUFLEN_EXT 0x00007800
#define VR_RXCTL_CHAIN 0x00008000
#define VR_RXCTL_RX_INTR 0x00800000
#define VR_RXCTL (VR_RXCTL_CHAIN|VR_RXCTL_RX_INTR)
#define VR_TXSTAT_DEFER 0x00000001
#define VR_TXSTAT_UNDERRUN 0x00000002
#define VR_TXSTAT_COLLCNT 0x00000078
#define VR_TXSTAT_SQE 0x00000080
#define VR_TXSTAT_ABRT 0x00000100
#define VR_TXSTAT_LATECOLL 0x00000200
#define VR_TXSTAT_CARRLOST 0x00000400
#define VR_TXSTAT_BUSERR 0x00002000
#define VR_TXSTAT_JABTIMEO 0x00004000
#define VR_TXSTAT_ERRSUM 0x00008000
#define VR_TXSTAT_OWN 0x80000000
#define VR_TXCTL_BUFLEN 0x000007FF
#define VR_TXCTL_BUFLEN_EXT 0x00007800
#define VR_TXCTL_TLINK 0x00008000
#define VR_TXCTL_FIRSTFRAG 0x00200000
#define VR_TXCTL_LASTFRAG 0x00400000
#define VR_TXCTL_FINT 0x00800000
#define VR_MAXFRAGS 16
#define VR_RX_LIST_CNT 64
#define VR_TX_LIST_CNT 64
#define VR_MIN_FRAMELEN 60
#define VR_FRAMELEN 1536
#define VR_RXLEN 1520
#define VR_TXOWN(x) x->vr_ptr->vr_status
struct vr_list_data {
struct vr_desc vr_rx_list[VR_RX_LIST_CNT];
struct vr_desc vr_tx_list[VR_TX_LIST_CNT];
};
struct vr_chain {
struct vr_desc *vr_ptr;
struct mbuf *vr_mbuf;
struct vr_chain *vr_nextdesc;
};
struct vr_chain_onefrag {
struct vr_desc *vr_ptr;
struct mbuf *vr_mbuf;
struct vr_chain_onefrag *vr_nextdesc;
};
struct vr_chain_data {
struct vr_chain_onefrag vr_rx_chain[VR_RX_LIST_CNT];
struct vr_chain vr_tx_chain[VR_TX_LIST_CNT];
struct vr_chain_onefrag *vr_rx_head;
struct vr_chain *vr_tx_head;
struct vr_chain *vr_tx_tail;
struct vr_chain *vr_tx_free;
};
struct vr_type {
u_int16_t vr_vid;
u_int16_t vr_did;
char *vr_name;
};
struct vr_mii_frame {
u_int8_t mii_stdelim;
u_int8_t mii_opcode;
u_int8_t mii_phyaddr;
u_int8_t mii_regaddr;
u_int8_t mii_turnaround;
u_int16_t mii_data;
};
/*
* MII constants
*/
#define VR_MII_STARTDELIM 0x01
#define VR_MII_READOP 0x02
#define VR_MII_WRITEOP 0x01
#define VR_MII_TURNAROUND 0x02
#define VR_FLAG_FORCEDELAY 1
#define VR_FLAG_SCHEDDELAY 2
#define VR_FLAG_DELAYTIMEO 3
struct vr_softc {
struct arpcom arpcom; /* interface info */
struct ifmedia ifmedia; /* media info */
bus_space_handle_t vr_bhandle; /* bus space handle */
bus_space_tag_t vr_btag; /* bus space tag */
struct vr_type *vr_info; /* Rhine adapter info */
struct vr_type *vr_pinfo; /* phy info */
u_int8_t vr_unit; /* interface number */
u_int8_t vr_type;
u_int8_t vr_phy_addr; /* PHY address */
u_int8_t vr_tx_pend; /* TX pending */
u_int8_t vr_want_auto;
u_int8_t vr_autoneg;
caddr_t vr_ldata_ptr;
struct vr_list_data *vr_ldata;
struct vr_chain_data vr_cdata;
};
/*
* register space access macros
*/
#define CSR_WRITE_4(sc, reg, val) \
bus_space_write_4(sc->vr_btag, sc->vr_bhandle, reg, val)
#define CSR_WRITE_2(sc, reg, val) \
bus_space_write_2(sc->vr_btag, sc->vr_bhandle, reg, val)
#define CSR_WRITE_1(sc, reg, val) \
bus_space_write_1(sc->vr_btag, sc->vr_bhandle, reg, val)
#define CSR_READ_4(sc, reg) \
bus_space_read_4(sc->vr_btag, sc->vr_bhandle, reg)
#define CSR_READ_2(sc, reg) \
bus_space_read_2(sc->vr_btag, sc->vr_bhandle, reg)
#define CSR_READ_1(sc, reg) \
bus_space_read_1(sc->vr_btag, sc->vr_bhandle, reg)
#define VR_TIMEOUT 1000
/*
* General constants that are fun to know.
*
* VIA vendor ID
*/
#define VIA_VENDORID 0x1106
/*
* VIA Rhine device IDs.
*/
#define VIA_DEVICEID_RHINE 0x3043
#define VIA_DEVICEID_RHINE_II 0x6100
/*
* Texas Instruments PHY identifiers
*/
#define TI_PHY_VENDORID 0x4000
#define TI_PHY_10BT 0x501F
#define TI_PHY_100VGPMI 0x502F
/*
* These ID values are for the NS DP83840A 10/100 PHY
*/
#define NS_PHY_VENDORID 0x2000
#define NS_PHY_83840A 0x5C0F
/*
* Level 1 10/100 PHY
*/
#define LEVEL1_PHY_VENDORID 0x7810
#define LEVEL1_PHY_LXT970 0x000F
/*
* Intel 82555 10/100 PHY
*/
#define INTEL_PHY_VENDORID 0x0A28
#define INTEL_PHY_82555 0x015F
/*
* SEEQ 80220 10/100 PHY
*/
#define SEEQ_PHY_VENDORID 0x0016
#define SEEQ_PHY_80220 0xF83F
/*
* PCI low memory base and low I/O base register, and
* other PCI registers.
*/
#define VR_PCI_VENDOR_ID 0x00
#define VR_PCI_DEVICE_ID 0x02
#define VR_PCI_COMMAND 0x04
#define VR_PCI_STATUS 0x06
#define VR_PCI_CLASSCODE 0x09
#define VR_PCI_LATENCY_TIMER 0x0D
#define VR_PCI_HEADER_TYPE 0x0E
#define VR_PCI_LOIO 0x10
#define VR_PCI_LOMEM 0x14
#define VR_PCI_BIOSROM 0x30
#define VR_PCI_INTLINE 0x3C
#define VR_PCI_INTPIN 0x3D
#define VR_PCI_MINGNT 0x3E
#define VR_PCI_MINLAT 0x0F
#define VR_PCI_RESETOPT 0x48
#define VR_PCI_EEPROM_DATA 0x4C
/* power management registers */
#define VR_PCI_CAPID 0xDC /* 8 bits */
#define VR_PCI_NEXTPTR 0xDD /* 8 bits */
#define VR_PCI_PWRMGMTCAP 0xDE /* 16 bits */
#define VR_PCI_PWRMGMTCTRL 0xE0 /* 16 bits */
#define VR_PSTATE_MASK 0x0003
#define VR_PSTATE_D0 0x0000
#define VR_PSTATE_D1 0x0002
#define VR_PSTATE_D2 0x0002
#define VR_PSTATE_D3 0x0003
#define VR_PME_EN 0x0010
#define VR_PME_STATUS 0x8000
#define PHY_UNKNOWN 6
#define VR_PHYADDR_MIN 0x00
#define VR_PHYADDR_MAX 0x1F
#define PHY_BMCR 0x00
#define PHY_BMSR 0x01
#define PHY_VENID 0x02
#define PHY_DEVID 0x03
#define PHY_ANAR 0x04
#define PHY_LPAR 0x05
#define PHY_ANEXP 0x06
#define PHY_ANAR_NEXTPAGE 0x8000
#define PHY_ANAR_RSVD0 0x4000
#define PHY_ANAR_TLRFLT 0x2000
#define PHY_ANAR_RSVD1 0x1000
#define PHY_ANAR_RSVD2 0x0800
#define PHY_ANAR_RSVD3 0x0400
#define PHY_ANAR_100BT4 0x0200
#define PHY_ANAR_100BTXFULL 0x0100
#define PHY_ANAR_100BTXHALF 0x0080
#define PHY_ANAR_10BTFULL 0x0040
#define PHY_ANAR_10BTHALF 0x0020
#define PHY_ANAR_PROTO4 0x0010
#define PHY_ANAR_PROTO3 0x0008
#define PHY_ANAR_PROTO2 0x0004
#define PHY_ANAR_PROTO1 0x0002
#define PHY_ANAR_PROTO0 0x0001
/*
* These are the register definitions for the PHY (physical layer
* interface chip).
*/
/*
* PHY BMCR Basic Mode Control Register
*/
#define PHY_BMCR_RESET 0x8000
#define PHY_BMCR_LOOPBK 0x4000
#define PHY_BMCR_SPEEDSEL 0x2000
#define PHY_BMCR_AUTONEGENBL 0x1000
#define PHY_BMCR_RSVD0 0x0800 /* write as zero */
#define PHY_BMCR_ISOLATE 0x0400
#define PHY_BMCR_AUTONEGRSTR 0x0200
#define PHY_BMCR_DUPLEX 0x0100
#define PHY_BMCR_COLLTEST 0x0080
#define PHY_BMCR_RSVD1 0x0040 /* write as zero, don't care */
#define PHY_BMCR_RSVD2 0x0020 /* write as zero, don't care */
#define PHY_BMCR_RSVD3 0x0010 /* write as zero, don't care */
#define PHY_BMCR_RSVD4 0x0008 /* write as zero, don't care */
#define PHY_BMCR_RSVD5 0x0004 /* write as zero, don't care */
#define PHY_BMCR_RSVD6 0x0002 /* write as zero, don't care */
#define PHY_BMCR_RSVD7 0x0001 /* write as zero, don't care */
/*
* RESET: 1 == software reset, 0 == normal operation
* Resets status and control registers to default values.
* Relatches all hardware config values.
*
* LOOPBK: 1 == loopback operation enabled, 0 == normal operation
*
* SPEEDSEL: 1 == 100Mb/s, 0 == 10Mb/s
* Link speed is selected byt his bit or if auto-negotiation if bit
* 12 (AUTONEGENBL) is set (in which case the value of this register
* is ignored).
*
* AUTONEGENBL: 1 == Autonegotiation enabled, 0 == Autonegotiation disabled
* Bits 8 and 13 are ignored when autoneg is set, otherwise bits 8 and 13
* determine speed and mode. Should be cleared and then set if PHY configured
* for no autoneg on startup.
*
* ISOLATE: 1 == isolate PHY from MII, 0 == normal operation
*
* AUTONEGRSTR: 1 == restart autonegotiation, 0 = normal operation
*
* DUPLEX: 1 == full duplex mode, 0 == half duplex mode
*
* COLLTEST: 1 == collision test enabled, 0 == normal operation
*/
/*
* PHY, BMSR Basic Mode Status Register
*/
#define PHY_BMSR_100BT4 0x8000
#define PHY_BMSR_100BTXFULL 0x4000
#define PHY_BMSR_100BTXHALF 0x2000
#define PHY_BMSR_10BTFULL 0x1000
#define PHY_BMSR_10BTHALF 0x0800
#define PHY_BMSR_RSVD1 0x0400 /* write as zero, don't care */
#define PHY_BMSR_RSVD2 0x0200 /* write as zero, don't care */
#define PHY_BMSR_RSVD3 0x0100 /* write as zero, don't care */
#define PHY_BMSR_RSVD4 0x0080 /* write as zero, don't care */
#define PHY_BMSR_MFPRESUP 0x0040
#define PHY_BMSR_AUTONEGCOMP 0x0020
#define PHY_BMSR_REMFAULT 0x0010
#define PHY_BMSR_CANAUTONEG 0x0008
#define PHY_BMSR_LINKSTAT 0x0004
#define PHY_BMSR_JABBER 0x0002
#define PHY_BMSR_EXTENDED 0x0001