0aeed3e993
Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
556 lines
12 KiB
C
556 lines
12 KiB
C
/*-
|
|
* Copyright (c) 2011-2012 Semihalf.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/pcpu.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/sched.h>
|
|
#include <sys/smp.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/tlb.h>
|
|
|
|
#include "qman.h"
|
|
#include "portals.h"
|
|
|
|
extern struct dpaa_portals_softc *qp_sc;
|
|
static struct qman_softc *qman_sc;
|
|
|
|
extern t_Handle qman_portal_setup(struct qman_softc *qsc);
|
|
|
|
static void
|
|
qman_exception(t_Handle app, e_QmExceptions exception)
|
|
{
|
|
struct qman_softc *sc;
|
|
const char *message;
|
|
|
|
sc = app;
|
|
|
|
switch (exception) {
|
|
case e_QM_EX_CORENET_INITIATOR_DATA:
|
|
message = "Initiator Data Error";
|
|
break;
|
|
case e_QM_EX_CORENET_TARGET_DATA:
|
|
message = "CoreNet Target Data Error";
|
|
break;
|
|
case e_QM_EX_CORENET_INVALID_TARGET_TRANSACTION:
|
|
message = "Invalid Target Transaction";
|
|
break;
|
|
case e_QM_EX_PFDR_THRESHOLD:
|
|
message = "PFDR Low Watermark Interrupt";
|
|
break;
|
|
case e_QM_EX_PFDR_ENQUEUE_BLOCKED:
|
|
message = "PFDR Enqueues Blocked Interrupt";
|
|
break;
|
|
case e_QM_EX_SINGLE_ECC:
|
|
message = "Single Bit ECC Error Interrupt";
|
|
break;
|
|
case e_QM_EX_MULTI_ECC:
|
|
message = "Multi Bit ECC Error Interrupt";
|
|
break;
|
|
case e_QM_EX_INVALID_COMMAND:
|
|
message = "Invalid Command Verb Interrupt";
|
|
break;
|
|
case e_QM_EX_DEQUEUE_DCP:
|
|
message = "Invalid Dequeue Direct Connect Portal Interrupt";
|
|
break;
|
|
case e_QM_EX_DEQUEUE_FQ:
|
|
message = "Invalid Dequeue FQ Interrupt";
|
|
break;
|
|
case e_QM_EX_DEQUEUE_SOURCE:
|
|
message = "Invalid Dequeue Source Interrupt";
|
|
break;
|
|
case e_QM_EX_DEQUEUE_QUEUE:
|
|
message = "Invalid Dequeue Queue Interrupt";
|
|
break;
|
|
case e_QM_EX_ENQUEUE_OVERFLOW:
|
|
message = "Invalid Enqueue Overflow Interrupt";
|
|
break;
|
|
case e_QM_EX_ENQUEUE_STATE:
|
|
message = "Invalid Enqueue State Interrupt";
|
|
break;
|
|
case e_QM_EX_ENQUEUE_CHANNEL:
|
|
message = "Invalid Enqueue Channel Interrupt";
|
|
break;
|
|
case e_QM_EX_ENQUEUE_QUEUE:
|
|
message = "Invalid Enqueue Queue Interrupt";
|
|
break;
|
|
case e_QM_EX_CG_STATE_CHANGE:
|
|
message = "CG change state notification";
|
|
break;
|
|
default:
|
|
message = "Unknown error";
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "QMan Exception: %s.\n", message);
|
|
}
|
|
|
|
/**
|
|
* General received frame callback.
|
|
* This is called, when user did not register his own callback for a given
|
|
* frame queue range (fqr).
|
|
*/
|
|
e_RxStoreResponse
|
|
qman_received_frame_callback(t_Handle app, t_Handle qm_fqr, t_Handle qm_portal,
|
|
uint32_t fqid_offset, t_DpaaFD *frame)
|
|
{
|
|
struct qman_softc *sc;
|
|
|
|
sc = app;
|
|
|
|
device_printf(sc->sc_dev, "dummy callback for received frame.\n");
|
|
return (e_RX_STORE_RESPONSE_CONTINUE);
|
|
}
|
|
|
|
/**
|
|
* General rejected frame callback.
|
|
* This is called, when user did not register his own callback for a given
|
|
* frame queue range (fqr).
|
|
*/
|
|
e_RxStoreResponse
|
|
qman_rejected_frame_callback(t_Handle app, t_Handle qm_fqr, t_Handle qm_portal,
|
|
uint32_t fqid_offset, t_DpaaFD *frame,
|
|
t_QmRejectedFrameInfo *qm_rejected_frame_info)
|
|
{
|
|
struct qman_softc *sc;
|
|
|
|
sc = app;
|
|
|
|
device_printf(sc->sc_dev, "dummy callback for rejected frame.\n");
|
|
return (e_RX_STORE_RESPONSE_CONTINUE);
|
|
}
|
|
|
|
int
|
|
qman_attach(device_t dev)
|
|
{
|
|
struct qman_softc *sc;
|
|
t_QmParam qp;
|
|
t_Error error;
|
|
t_QmRevisionInfo rev;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_dev = dev;
|
|
qman_sc = sc;
|
|
|
|
if (XX_MallocSmartInit() != E_OK) {
|
|
device_printf(dev, "could not initialize smart allocator.\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
sched_pin();
|
|
|
|
/* Allocate resources */
|
|
sc->sc_rrid = 0;
|
|
sc->sc_rres = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&sc->sc_rrid, 0, ~0, QMAN_CCSR_SIZE, RF_ACTIVE);
|
|
if (sc->sc_rres == NULL) {
|
|
device_printf(dev, "could not allocate memory.\n");
|
|
goto err;
|
|
}
|
|
|
|
sc->sc_irid = 0;
|
|
sc->sc_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&sc->sc_irid, RF_ACTIVE | RF_SHAREABLE);
|
|
if (sc->sc_ires == NULL) {
|
|
device_printf(dev, "could not allocate error interrupt.\n");
|
|
goto err;
|
|
}
|
|
|
|
if (qp_sc == NULL)
|
|
goto err;
|
|
|
|
dpaa_portal_map_registers(qp_sc);
|
|
|
|
/* Initialize QMan */
|
|
qp.guestId = NCSW_MASTER_ID;
|
|
qp.baseAddress = rman_get_bushandle(sc->sc_rres);
|
|
qp.swPortalsBaseAddress = rman_get_bushandle(qp_sc->sc_rres[0]);
|
|
qp.liodn = 0;
|
|
qp.totalNumOfFqids = QMAN_MAX_FQIDS;
|
|
qp.fqdMemPartitionId = NCSW_MASTER_ID;
|
|
qp.pfdrMemPartitionId = NCSW_MASTER_ID;
|
|
qp.f_Exception = qman_exception;
|
|
qp.h_App = sc;
|
|
qp.errIrq = (int)sc->sc_ires;
|
|
qp.partFqidBase = QMAN_FQID_BASE;
|
|
qp.partNumOfFqids = QMAN_MAX_FQIDS;
|
|
qp.partCgsBase = 0;
|
|
qp.partNumOfCgs = 0;
|
|
|
|
sc->sc_qh = QM_Config(&qp);
|
|
if (sc->sc_qh == NULL) {
|
|
device_printf(dev, "could not be configured\n");
|
|
goto err;
|
|
}
|
|
|
|
error = QM_Init(sc->sc_qh);
|
|
if (error != E_OK) {
|
|
device_printf(dev, "could not be initialized\n");
|
|
goto err;
|
|
}
|
|
|
|
error = QM_GetRevision(sc->sc_qh, &rev);
|
|
if (error != E_OK) {
|
|
device_printf(dev, "could not get QMan revision\n");
|
|
goto err;
|
|
}
|
|
|
|
device_printf(dev, "Hardware version: %d.%d.\n",
|
|
rev.majorRev, rev.minorRev);
|
|
|
|
sched_unpin();
|
|
|
|
qman_portal_setup(sc);
|
|
|
|
return (0);
|
|
|
|
err:
|
|
sched_unpin();
|
|
qman_detach(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
int
|
|
qman_detach(device_t dev)
|
|
{
|
|
struct qman_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (sc->sc_qh)
|
|
QM_Free(sc->sc_qh);
|
|
|
|
if (sc->sc_ires != NULL)
|
|
XX_DeallocIntr((int)sc->sc_ires);
|
|
|
|
if (sc->sc_ires != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ,
|
|
sc->sc_irid, sc->sc_ires);
|
|
|
|
if (sc->sc_rres != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
sc->sc_rrid, sc->sc_rres);
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
qman_suspend(device_t dev)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
qman_resume(device_t dev)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
qman_shutdown(device_t dev)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/**
|
|
* @group QMan API functions implementation.
|
|
* @{
|
|
*/
|
|
|
|
t_Handle
|
|
qman_fqr_create(uint32_t fqids_num, e_QmFQChannel channel, uint8_t wq,
|
|
bool force_fqid, uint32_t fqid_or_align, bool init_parked,
|
|
bool hold_active, bool prefer_in_cache, bool congst_avoid_ena,
|
|
t_Handle congst_group, int8_t overhead_accounting_len,
|
|
uint32_t tail_drop_threshold)
|
|
{
|
|
struct qman_softc *sc;
|
|
t_QmFqrParams fqr;
|
|
unsigned int cpu;
|
|
t_Handle fqrh, portal;
|
|
|
|
sc = qman_sc;
|
|
|
|
sched_pin();
|
|
cpu = PCPU_GET(cpuid);
|
|
|
|
/* Ensure we have got QMan port initialized */
|
|
portal = qman_portal_setup(sc);
|
|
if (portal == NULL) {
|
|
device_printf(sc->sc_dev, "could not setup QMan portal\n");
|
|
goto err;
|
|
}
|
|
|
|
fqr.h_Qm = sc->sc_qh;
|
|
fqr.h_QmPortal = portal;
|
|
fqr.initParked = init_parked;
|
|
fqr.holdActive = hold_active;
|
|
fqr.preferInCache = prefer_in_cache;
|
|
|
|
/* We do not support stashing */
|
|
fqr.useContextAForStash = FALSE;
|
|
fqr.p_ContextA = 0;
|
|
fqr.p_ContextB = 0;
|
|
|
|
fqr.channel = channel;
|
|
fqr.wq = wq;
|
|
fqr.shadowMode = FALSE;
|
|
fqr.numOfFqids = fqids_num;
|
|
|
|
/* FQID */
|
|
fqr.useForce = force_fqid;
|
|
if (force_fqid) {
|
|
fqr.qs.frcQ.fqid = fqid_or_align;
|
|
} else {
|
|
fqr.qs.nonFrcQs.align = fqid_or_align;
|
|
}
|
|
|
|
/* Congestion Avoidance */
|
|
fqr.congestionAvoidanceEnable = congst_avoid_ena;
|
|
if (congst_avoid_ena) {
|
|
fqr.congestionAvoidanceParams.h_QmCg = congst_group;
|
|
fqr.congestionAvoidanceParams.overheadAccountingLength =
|
|
overhead_accounting_len;
|
|
fqr.congestionAvoidanceParams.fqTailDropThreshold =
|
|
tail_drop_threshold;
|
|
} else {
|
|
fqr.congestionAvoidanceParams.h_QmCg = 0;
|
|
fqr.congestionAvoidanceParams.overheadAccountingLength = 0;
|
|
fqr.congestionAvoidanceParams.fqTailDropThreshold = 0;
|
|
}
|
|
|
|
fqrh = QM_FQR_Create(&fqr);
|
|
if (fqrh == NULL) {
|
|
device_printf(sc->sc_dev, "could not create Frame Queue Range"
|
|
"\n");
|
|
goto err;
|
|
}
|
|
|
|
sc->sc_fqr_cpu[QM_FQR_GetFqid(fqrh)] = PCPU_GET(cpuid);
|
|
|
|
sched_unpin();
|
|
|
|
return (fqrh);
|
|
|
|
err:
|
|
sched_unpin();
|
|
|
|
return (NULL);
|
|
}
|
|
|
|
t_Error
|
|
qman_fqr_free(t_Handle fqr)
|
|
{
|
|
struct qman_softc *sc;
|
|
t_Error error;
|
|
|
|
sc = qman_sc;
|
|
thread_lock(curthread);
|
|
sched_bind(curthread, sc->sc_fqr_cpu[QM_FQR_GetFqid(fqr)]);
|
|
thread_unlock(curthread);
|
|
|
|
error = QM_FQR_Free(fqr);
|
|
|
|
thread_lock(curthread);
|
|
sched_unbind(curthread);
|
|
thread_unlock(curthread);
|
|
|
|
return (error);
|
|
}
|
|
|
|
t_Error
|
|
qman_fqr_register_cb(t_Handle fqr, t_QmReceivedFrameCallback *callback,
|
|
t_Handle app)
|
|
{
|
|
struct qman_softc *sc;
|
|
t_Error error;
|
|
t_Handle portal;
|
|
|
|
sc = qman_sc;
|
|
sched_pin();
|
|
|
|
/* Ensure we have got QMan port initialized */
|
|
portal = qman_portal_setup(sc);
|
|
if (portal == NULL) {
|
|
device_printf(sc->sc_dev, "could not setup QMan portal\n");
|
|
sched_unpin();
|
|
return (E_NOT_SUPPORTED);
|
|
}
|
|
|
|
error = QM_FQR_RegisterCB(fqr, callback, app);
|
|
|
|
sched_unpin();
|
|
|
|
return (error);
|
|
}
|
|
|
|
t_Error
|
|
qman_fqr_enqueue(t_Handle fqr, uint32_t fqid_off, t_DpaaFD *frame)
|
|
{
|
|
struct qman_softc *sc;
|
|
t_Error error;
|
|
t_Handle portal;
|
|
|
|
sc = qman_sc;
|
|
sched_pin();
|
|
|
|
/* Ensure we have got QMan port initialized */
|
|
portal = qman_portal_setup(sc);
|
|
if (portal == NULL) {
|
|
device_printf(sc->sc_dev, "could not setup QMan portal\n");
|
|
sched_unpin();
|
|
return (E_NOT_SUPPORTED);
|
|
}
|
|
|
|
error = QM_FQR_Enqueue(fqr, portal, fqid_off, frame);
|
|
|
|
sched_unpin();
|
|
|
|
return (error);
|
|
}
|
|
|
|
uint32_t
|
|
qman_fqr_get_counter(t_Handle fqr, uint32_t fqid_off,
|
|
e_QmFqrCounters counter)
|
|
{
|
|
struct qman_softc *sc;
|
|
uint32_t val;
|
|
t_Handle portal;
|
|
|
|
sc = qman_sc;
|
|
sched_pin();
|
|
|
|
/* Ensure we have got QMan port initialized */
|
|
portal = qman_portal_setup(sc);
|
|
if (portal == NULL) {
|
|
device_printf(sc->sc_dev, "could not setup QMan portal\n");
|
|
sched_unpin();
|
|
return (0);
|
|
}
|
|
|
|
val = QM_FQR_GetCounter(fqr, portal, fqid_off, counter);
|
|
|
|
sched_unpin();
|
|
|
|
return (val);
|
|
}
|
|
|
|
t_Error
|
|
qman_fqr_pull_frame(t_Handle fqr, uint32_t fqid_off, t_DpaaFD *frame)
|
|
{
|
|
struct qman_softc *sc;
|
|
t_Error error;
|
|
t_Handle portal;
|
|
|
|
sc = qman_sc;
|
|
sched_pin();
|
|
|
|
/* Ensure we have got QMan port initialized */
|
|
portal = qman_portal_setup(sc);
|
|
if (portal == NULL) {
|
|
device_printf(sc->sc_dev, "could not setup QMan portal\n");
|
|
sched_unpin();
|
|
return (E_NOT_SUPPORTED);
|
|
}
|
|
|
|
error = QM_FQR_PullFrame(fqr, portal, fqid_off, frame);
|
|
|
|
sched_unpin();
|
|
|
|
return (error);
|
|
}
|
|
|
|
uint32_t
|
|
qman_fqr_get_base_fqid(t_Handle fqr)
|
|
{
|
|
struct qman_softc *sc;
|
|
uint32_t val;
|
|
t_Handle portal;
|
|
|
|
sc = qman_sc;
|
|
sched_pin();
|
|
|
|
/* Ensure we have got QMan port initialized */
|
|
portal = qman_portal_setup(sc);
|
|
if (portal == NULL) {
|
|
device_printf(sc->sc_dev, "could not setup QMan portal\n");
|
|
sched_unpin();
|
|
return (0);
|
|
}
|
|
|
|
val = QM_FQR_GetFqid(fqr);
|
|
|
|
sched_unpin();
|
|
|
|
return (val);
|
|
}
|
|
|
|
t_Error
|
|
qman_poll(e_QmPortalPollSource source)
|
|
{
|
|
struct qman_softc *sc;
|
|
t_Error error;
|
|
t_Handle portal;
|
|
|
|
sc = qman_sc;
|
|
sched_pin();
|
|
|
|
/* Ensure we have got QMan port initialized */
|
|
portal = qman_portal_setup(sc);
|
|
if (portal == NULL) {
|
|
device_printf(sc->sc_dev, "could not setup QMan portal\n");
|
|
sched_unpin();
|
|
return (E_NOT_SUPPORTED);
|
|
}
|
|
|
|
error = QM_Poll(sc->sc_qh, source);
|
|
|
|
sched_unpin();
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* TODO: add polling and/or congestion support.
|
|
*/
|
|
|
|
/** @} */
|