freebsd-skq/sys/contrib/octeon-sdk/cvmx-address.h
jmallett 56248d9da8 Merge the Cavium Octeon SDK 2.3.0 Simple Executive code and update FreeBSD to
make use of it where possible.

This primarily brings in support for newer hardware, and FreeBSD is not yet
able to support the abundance of IRQs on new hardware and many features in the
Ethernet driver.

Because of the changes to IRQs in the Simple Executive, we have to maintain our
own list of Octeon IRQs now, which probably can be pared-down and be specific
to the CIU interrupt unit soon, and when other interrupt mechanisms are added
they can maintain their own definitions.

Remove unmasking of interrupts from within the UART device now that the
function used is no longer present in the Simple Executive.  The unmasking
seems to have been gratuitous as this is more properly handled by the buses
above the UART device, and seems to work on that basis.
2012-03-11 06:17:49 +00:00

267 lines
10 KiB
C

/***********************license start***************
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
* reserved.
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of Cavium Inc. nor the names of
* its contributors may be used to endorse or promote products
* derived from this software without specific prior written
* permission.
* This Software, including technical data, may be subject to U.S. export control
* laws, including the U.S. Export Administration Act and its associated
* regulations, and may be subject to export or import regulations in other
* countries.
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
***********************license end**************************************/
/**
* @file
* Typedefs and defines for working with Octeon physical addresses.
*
* <hr>$Revision: 38306 $<hr>
*/
#ifndef __CVMX_ADDRESS_H__
#define __CVMX_ADDRESS_H__
#ifndef CVMX_BUILD_FOR_LINUX_KERNEL
#include "cvmx-abi.h"
#endif
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
CVMX_MIPS_SPACE_XKSEG = 3LL,
CVMX_MIPS_SPACE_XKPHYS = 2LL,
CVMX_MIPS_SPACE_XSSEG = 1LL,
CVMX_MIPS_SPACE_XUSEG = 0LL
} cvmx_mips_space_t;
typedef enum {
CVMX_MIPS_XKSEG_SPACE_KSEG0 = 0LL,
CVMX_MIPS_XKSEG_SPACE_KSEG1 = 1LL,
CVMX_MIPS_XKSEG_SPACE_SSEG = 2LL,
CVMX_MIPS_XKSEG_SPACE_KSEG3 = 3LL
} cvmx_mips_xkseg_space_t;
/* decodes <14:13> of a kseg3 window address */
typedef enum {
CVMX_ADD_WIN_SCR = 0L,
CVMX_ADD_WIN_DMA = 1L, /* see cvmx_add_win_dma_dec_t for further decode */
CVMX_ADD_WIN_UNUSED = 2L,
CVMX_ADD_WIN_UNUSED2 = 3L
} cvmx_add_win_dec_t;
/* decode within DMA space */
typedef enum {
CVMX_ADD_WIN_DMA_ADD = 0L, /* add store data to the write buffer entry, allocating it if necessary */
CVMX_ADD_WIN_DMA_SENDMEM = 1L, /* send out the write buffer entry to DRAM */
/* store data must be normal DRAM memory space address in this case */
CVMX_ADD_WIN_DMA_SENDDMA = 2L, /* send out the write buffer entry as an IOBDMA command */
/* see CVMX_ADD_WIN_DMA_SEND_DEC for data contents */
CVMX_ADD_WIN_DMA_SENDIO = 3L, /* send out the write buffer entry as an IO write */
/* store data must be normal IO space address in this case */
CVMX_ADD_WIN_DMA_SENDSINGLE = 4L, /* send out a single-tick command on the NCB bus */
/* no write buffer data needed/used */
} cvmx_add_win_dma_dec_t;
/**
* Physical Address Decode
*
* Octeon-I HW never interprets this X (<39:36> reserved
* for future expansion), software should set to 0.
*
* - 0x0 XXX0 0000 0000 to DRAM Cached
* - 0x0 XXX0 0FFF FFFF
*
* - 0x0 XXX0 1000 0000 to Boot Bus Uncached (Converted to 0x1 00X0 1000 0000
* - 0x0 XXX0 1FFF FFFF + EJTAG to 0x1 00X0 1FFF FFFF)
*
* - 0x0 XXX0 2000 0000 to DRAM Cached
* - 0x0 XXXF FFFF FFFF
*
* - 0x1 00X0 0000 0000 to Boot Bus Uncached
* - 0x1 00XF FFFF FFFF
*
* - 0x1 01X0 0000 0000 to Other NCB Uncached
* - 0x1 FFXF FFFF FFFF devices
*
* Decode of all Octeon addresses
*/
typedef union {
uint64_t u64;
struct {
cvmx_mips_space_t R : 2;
uint64_t offset :62;
} sva; /* mapped or unmapped virtual address */
struct {
uint64_t zeroes :33;
uint64_t offset :31;
} suseg; /* mapped USEG virtual addresses (typically) */
struct {
uint64_t ones :33;
cvmx_mips_xkseg_space_t sp : 2;
uint64_t offset :29;
} sxkseg; /* mapped or unmapped virtual address */
struct {
cvmx_mips_space_t R : 2; /* CVMX_MIPS_SPACE_XKPHYS in this case */
uint64_t cca : 3; /* ignored by octeon */
uint64_t mbz :10;
uint64_t pa :49; /* physical address */
} sxkphys; /* physical address accessed through xkphys unmapped virtual address */
struct {
uint64_t mbz :15;
uint64_t is_io : 1; /* if set, the address is uncached and resides on MCB bus */
uint64_t did : 8; /* the hardware ignores this field when is_io==0, else device ID */
uint64_t unaddr: 4; /* the hardware ignores <39:36> in Octeon I */
uint64_t offset :36;
} sphys; /* physical address */
struct {
uint64_t zeroes :24; /* techically, <47:40> are dont-cares */
uint64_t unaddr: 4; /* the hardware ignores <39:36> in Octeon I */
uint64_t offset :36;
} smem; /* physical mem address */
struct {
uint64_t mem_region :2;
uint64_t mbz :13;
uint64_t is_io : 1; /* 1 in this case */
uint64_t did : 8; /* the hardware ignores this field when is_io==0, else device ID */
uint64_t unaddr: 4; /* the hardware ignores <39:36> in Octeon I */
uint64_t offset :36;
} sio; /* physical IO address */
struct {
uint64_t ones : 49;
cvmx_add_win_dec_t csrdec : 2; /* CVMX_ADD_WIN_SCR (0) in this case */
uint64_t addr : 13;
} sscr; /* scratchpad virtual address - accessed through a window at the end of kseg3 */
/* there should only be stores to IOBDMA space, no loads */
struct {
uint64_t ones : 49;
cvmx_add_win_dec_t csrdec : 2; /* CVMX_ADD_WIN_DMA (1) in this case */
uint64_t unused2: 3;
cvmx_add_win_dma_dec_t type : 3;
uint64_t addr : 7;
} sdma; /* IOBDMA virtual address - accessed through a window at the end of kseg3 */
struct {
uint64_t didspace : 24;
uint64_t unused : 40;
} sfilldidspace;
} cvmx_addr_t;
/* These macros for used by 32 bit applications */
#define CVMX_MIPS32_SPACE_KSEG0 1l
#define CVMX_ADD_SEG32(segment, add) (((int32_t)segment << 31) | (int32_t)(add))
/* Currently all IOs are performed using XKPHYS addressing. Linux uses the
CvmMemCtl register to enable XKPHYS addressing to IO space from user mode.
Future OSes may need to change the upper bits of IO addresses. The
following define controls the upper two bits for all IO addresses generated
by the simple executive library */
#define CVMX_IO_SEG CVMX_MIPS_SPACE_XKPHYS
/* These macros simplify the process of creating common IO addresses */
#define CVMX_ADD_SEG(segment, add) ((((uint64_t)segment) << 62) | (add))
#ifndef CVMX_ADD_IO_SEG
#define CVMX_ADD_IO_SEG(add) CVMX_ADD_SEG(CVMX_IO_SEG, (add))
#endif
#define CVMX_ADDR_DIDSPACE(did) (((CVMX_IO_SEG) << 22) | ((1ULL) << 8) | (did))
#define CVMX_ADDR_DID(did) (CVMX_ADDR_DIDSPACE(did) << 40)
#define CVMX_FULL_DID(did,subdid) (((did) << 3) | (subdid))
/* from include/ncb_rsl_id.v */
#define CVMX_OCT_DID_MIS 0ULL /* misc stuff */
#define CVMX_OCT_DID_GMX0 1ULL
#define CVMX_OCT_DID_GMX1 2ULL
#define CVMX_OCT_DID_PCI 3ULL
#define CVMX_OCT_DID_KEY 4ULL
#define CVMX_OCT_DID_FPA 5ULL
#define CVMX_OCT_DID_DFA 6ULL
#define CVMX_OCT_DID_ZIP 7ULL
#define CVMX_OCT_DID_RNG 8ULL
#define CVMX_OCT_DID_IPD 9ULL
#define CVMX_OCT_DID_PKT 10ULL
#define CVMX_OCT_DID_TIM 11ULL
#define CVMX_OCT_DID_TAG 12ULL
/* the rest are not on the IO bus */
#define CVMX_OCT_DID_L2C 16ULL
#define CVMX_OCT_DID_LMC 17ULL
#define CVMX_OCT_DID_SPX0 18ULL
#define CVMX_OCT_DID_SPX1 19ULL
#define CVMX_OCT_DID_PIP 20ULL
#define CVMX_OCT_DID_ASX0 22ULL
#define CVMX_OCT_DID_ASX1 23ULL
#define CVMX_OCT_DID_IOB 30ULL
#define CVMX_OCT_DID_PKT_SEND CVMX_FULL_DID(CVMX_OCT_DID_PKT,2ULL)
#define CVMX_OCT_DID_TAG_SWTAG CVMX_FULL_DID(CVMX_OCT_DID_TAG,0ULL)
#define CVMX_OCT_DID_TAG_TAG1 CVMX_FULL_DID(CVMX_OCT_DID_TAG,1ULL)
#define CVMX_OCT_DID_TAG_TAG2 CVMX_FULL_DID(CVMX_OCT_DID_TAG,2ULL)
#define CVMX_OCT_DID_TAG_TAG3 CVMX_FULL_DID(CVMX_OCT_DID_TAG,3ULL)
#define CVMX_OCT_DID_TAG_NULL_RD CVMX_FULL_DID(CVMX_OCT_DID_TAG,4ULL)
#define CVMX_OCT_DID_TAG_TAG5 CVMX_FULL_DID(CVMX_OCT_DID_TAG,5ULL)
#define CVMX_OCT_DID_TAG_CSR CVMX_FULL_DID(CVMX_OCT_DID_TAG,7ULL)
#define CVMX_OCT_DID_FAU_FAI CVMX_FULL_DID(CVMX_OCT_DID_IOB,0ULL)
#define CVMX_OCT_DID_TIM_CSR CVMX_FULL_DID(CVMX_OCT_DID_TIM,0ULL)
#define CVMX_OCT_DID_KEY_RW CVMX_FULL_DID(CVMX_OCT_DID_KEY,0ULL)
#define CVMX_OCT_DID_PCI_6 CVMX_FULL_DID(CVMX_OCT_DID_PCI,6ULL)
#define CVMX_OCT_DID_MIS_BOO CVMX_FULL_DID(CVMX_OCT_DID_MIS,0ULL)
#define CVMX_OCT_DID_PCI_RML CVMX_FULL_DID(CVMX_OCT_DID_PCI,0ULL)
#define CVMX_OCT_DID_IPD_CSR CVMX_FULL_DID(CVMX_OCT_DID_IPD,7ULL)
#define CVMX_OCT_DID_DFA_CSR CVMX_FULL_DID(CVMX_OCT_DID_DFA,7ULL)
#define CVMX_OCT_DID_MIS_CSR CVMX_FULL_DID(CVMX_OCT_DID_MIS,7ULL)
#define CVMX_OCT_DID_ZIP_CSR CVMX_FULL_DID(CVMX_OCT_DID_ZIP,0ULL)
#ifndef CVMX_BUILD_FOR_LINUX_KERNEL
#ifdef CVMX_ABI_N32
#define UNMAPPED_PTR(x) ( (1U << 31) | x )
#else
#define UNMAPPED_PTR(x) ( (1ULL << 63) | x )
#endif
#endif
#ifdef __cplusplus
}
#endif
#endif /* __CVMX_ADDRESS_H__ */