freebsd-skq/sys/dev/virtio/scsi/virtio_scsi.h
grehan 789936ed16 Virtio SCSI driver
Submitted by:	Bryan Venteicher  bryanv at daemoninthecloset dot org
Reviewed by:	grehan
2012-10-11 23:41:18 +00:00

153 lines
5.1 KiB
C

/*-
* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _VIRTIO_SCSI_H
#define _VIRTIO_SCSI_H
/* Feature bits */
#define VIRTIO_SCSI_F_INOUT 0x0001 /* Single request can contain both
* read and write buffers */
#define VIRTIO_SCSI_F_HOTPLUG 0x0002 /* Host should enable hot plug/unplug
* of new LUNs and targets.
*/
#define VIRTIO_SCSI_CDB_SIZE 32
#define VIRTIO_SCSI_SENSE_SIZE 96
/* SCSI command request, followed by data-out */
struct virtio_scsi_cmd_req {
uint8_t lun[8]; /* Logical Unit Number */
uint64_t tag; /* Command identifier */
uint8_t task_attr; /* Task attribute */
uint8_t prio;
uint8_t crn;
uint8_t cdb[VIRTIO_SCSI_CDB_SIZE];
} __packed;
/* Response, followed by sense data and data-in */
struct virtio_scsi_cmd_resp {
uint32_t sense_len; /* Sense data length */
uint32_t resid; /* Residual bytes in data buffer */
uint16_t status_qualifier; /* Status qualifier */
uint8_t status; /* Command completion status */
uint8_t response; /* Response values */
uint8_t sense[VIRTIO_SCSI_SENSE_SIZE];
} __packed;
/* Task Management Request */
struct virtio_scsi_ctrl_tmf_req {
uint32_t type;
uint32_t subtype;
uint8_t lun[8];
uint64_t tag;
} __packed;
struct virtio_scsi_ctrl_tmf_resp {
uint8_t response;
} __packed;
/* Asynchronous notification query/subscription */
struct virtio_scsi_ctrl_an_req {
uint32_t type;
uint8_t lun[8];
uint32_t event_requested;
} __packed;
struct virtio_scsi_ctrl_an_resp {
uint32_t event_actual;
uint8_t response;
} __packed;
struct virtio_scsi_event {
uint32_t event;
uint8_t lun[8];
uint32_t reason;
} __packed;
struct virtio_scsi_config {
uint32_t num_queues;
uint32_t seg_max;
uint32_t max_sectors;
uint32_t cmd_per_lun;
uint32_t event_info_size;
uint32_t sense_size;
uint32_t cdb_size;
uint16_t max_channel;
uint16_t max_target;
uint32_t max_lun;
} __packed;
/* Response codes */
#define VIRTIO_SCSI_S_OK 0
#define VIRTIO_SCSI_S_FUNCTION_COMPLETE 0
#define VIRTIO_SCSI_S_OVERRUN 1
#define VIRTIO_SCSI_S_ABORTED 2
#define VIRTIO_SCSI_S_BAD_TARGET 3
#define VIRTIO_SCSI_S_RESET 4
#define VIRTIO_SCSI_S_BUSY 5
#define VIRTIO_SCSI_S_TRANSPORT_FAILURE 6
#define VIRTIO_SCSI_S_TARGET_FAILURE 7
#define VIRTIO_SCSI_S_NEXUS_FAILURE 8
#define VIRTIO_SCSI_S_FAILURE 9
#define VIRTIO_SCSI_S_FUNCTION_SUCCEEDED 10
#define VIRTIO_SCSI_S_FUNCTION_REJECTED 11
#define VIRTIO_SCSI_S_INCORRECT_LUN 12
/* Controlq type codes. */
#define VIRTIO_SCSI_T_TMF 0
#define VIRTIO_SCSI_T_AN_QUERY 1
#define VIRTIO_SCSI_T_AN_SUBSCRIBE 2
/* Valid TMF subtypes. */
#define VIRTIO_SCSI_T_TMF_ABORT_TASK 0
#define VIRTIO_SCSI_T_TMF_ABORT_TASK_SET 1
#define VIRTIO_SCSI_T_TMF_CLEAR_ACA 2
#define VIRTIO_SCSI_T_TMF_CLEAR_TASK_SET 3
#define VIRTIO_SCSI_T_TMF_I_T_NEXUS_RESET 4
#define VIRTIO_SCSI_T_TMF_LOGICAL_UNIT_RESET 5
#define VIRTIO_SCSI_T_TMF_QUERY_TASK 6
#define VIRTIO_SCSI_T_TMF_QUERY_TASK_SET 7
/* Events. */
#define VIRTIO_SCSI_T_EVENTS_MISSED 0x80000000
#define VIRTIO_SCSI_T_NO_EVENT 0
#define VIRTIO_SCSI_T_TRANSPORT_RESET 1
#define VIRTIO_SCSI_T_ASYNC_NOTIFY 2
/* Reasons of transport reset event */
#define VIRTIO_SCSI_EVT_RESET_HARD 0
#define VIRTIO_SCSI_EVT_RESET_RESCAN 1
#define VIRTIO_SCSI_EVT_RESET_REMOVED 2
#define VIRTIO_SCSI_S_SIMPLE 0
#define VIRTIO_SCSI_S_ORDERED 1
#define VIRTIO_SCSI_S_HEAD 2
#define VIRTIO_SCSI_S_ACA 3
#endif /* _VIRTIO_SCSI_H */