d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
90edb2ac5b
freebsd-skq/sys/dev/mwl/if_mwl.c
Pedro F. Giffuni 718cf2ccb9 sys/dev: further adoption of SPDX licensing ID tags. 
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

4837 lines
132 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
* Copyright (c) 2007-2008 Marvell Semiconductor, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the Marvell 88W8363 Wireless LAN controller.
*/
#include "opt_inet.h"
#include "opt_mwl.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/errno.h>
#include <sys/callout.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <machine/bus.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_llc.h>
#include <net/bpf.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_input.h>
#include <net80211/ieee80211_regdomain.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_ether.h>
#endif /* INET */
#include <dev/mwl/if_mwlvar.h>
#include <dev/mwl/mwldiag.h>
/* idiomatic shorthands: MS = mask+shift, SM = shift+mask */
#define MS(v,x) (((v) & x) >> x##_S)
#define SM(v,x) (((v) << x##_S) & x)
static struct ieee80211vap *mwl_vap_create(struct ieee80211com *,
const char [IFNAMSIZ], int, enum ieee80211_opmode, int,
const uint8_t [IEEE80211_ADDR_LEN],
const uint8_t [IEEE80211_ADDR_LEN]);
static void mwl_vap_delete(struct ieee80211vap *);
static int mwl_setupdma(struct mwl_softc *);
static int mwl_hal_reset(struct mwl_softc *sc);
static int mwl_init(struct mwl_softc *);
static void mwl_parent(struct ieee80211com *);
static int mwl_reset(struct ieee80211vap *, u_long);
static void mwl_stop(struct mwl_softc *);
static void mwl_start(struct mwl_softc *);
static int mwl_transmit(struct ieee80211com *, struct mbuf *);
static int mwl_raw_xmit(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_bpf_params *);
static int mwl_media_change(struct ifnet *);
static void mwl_watchdog(void *);
static int mwl_ioctl(struct ieee80211com *, u_long, void *);
static void mwl_radar_proc(void *, int);
static void mwl_chanswitch_proc(void *, int);
static void mwl_bawatchdog_proc(void *, int);
static int mwl_key_alloc(struct ieee80211vap *,
struct ieee80211_key *,
ieee80211_keyix *, ieee80211_keyix *);
static int mwl_key_delete(struct ieee80211vap *,
const struct ieee80211_key *);
static int mwl_key_set(struct ieee80211vap *,
const struct ieee80211_key *);
static int _mwl_key_set(struct ieee80211vap *,
const struct ieee80211_key *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
static int mwl_mode_init(struct mwl_softc *);
static void mwl_update_mcast(struct ieee80211com *);
static void mwl_update_promisc(struct ieee80211com *);
static void mwl_updateslot(struct ieee80211com *);
static int mwl_beacon_setup(struct ieee80211vap *);
static void mwl_beacon_update(struct ieee80211vap *, int);
#ifdef MWL_HOST_PS_SUPPORT
static void mwl_update_ps(struct ieee80211vap *, int);
static int mwl_set_tim(struct ieee80211_node *, int);
#endif
static int mwl_dma_setup(struct mwl_softc *);
static void mwl_dma_cleanup(struct mwl_softc *);
static struct ieee80211_node *mwl_node_alloc(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
static void mwl_node_cleanup(struct ieee80211_node *);
static void mwl_node_drain(struct ieee80211_node *);
static void mwl_node_getsignal(const struct ieee80211_node *,
int8_t *, int8_t *);
static void mwl_node_getmimoinfo(const struct ieee80211_node *,
struct ieee80211_mimo_info *);
static int mwl_rxbuf_init(struct mwl_softc *, struct mwl_rxbuf *);
static void mwl_rx_proc(void *, int);
static void mwl_txq_init(struct mwl_softc *sc, struct mwl_txq *, int);
static int mwl_tx_setup(struct mwl_softc *, int, int);
static int mwl_wme_update(struct ieee80211com *);
static void mwl_tx_cleanupq(struct mwl_softc *, struct mwl_txq *);
static void mwl_tx_cleanup(struct mwl_softc *);
static uint16_t mwl_calcformat(uint8_t rate, const struct ieee80211_node *);
static int mwl_tx_start(struct mwl_softc *, struct ieee80211_node *,
struct mwl_txbuf *, struct mbuf *);
static void mwl_tx_proc(void *, int);
static int mwl_chan_set(struct mwl_softc *, struct ieee80211_channel *);
static void mwl_draintxq(struct mwl_softc *);
static void mwl_cleartxq(struct mwl_softc *, struct ieee80211vap *);
static int mwl_recv_action(struct ieee80211_node *,
const struct ieee80211_frame *,
const uint8_t *, const uint8_t *);
static int mwl_addba_request(struct ieee80211_node *,
struct ieee80211_tx_ampdu *, int dialogtoken,
int baparamset, int batimeout);
static int mwl_addba_response(struct ieee80211_node *,
struct ieee80211_tx_ampdu *, int status,
int baparamset, int batimeout);
static void mwl_addba_stop(struct ieee80211_node *,
struct ieee80211_tx_ampdu *);
static int mwl_startrecv(struct mwl_softc *);
static MWL_HAL_APMODE mwl_getapmode(const struct ieee80211vap *,
struct ieee80211_channel *);
static int mwl_setapmode(struct ieee80211vap *, struct ieee80211_channel*);
static void mwl_scan_start(struct ieee80211com *);
static void mwl_scan_end(struct ieee80211com *);
static void mwl_set_channel(struct ieee80211com *);
static int mwl_peerstadb(struct ieee80211_node *,
int aid, int staid, MWL_HAL_PEERINFO *pi);
static int mwl_localstadb(struct ieee80211vap *);
static int mwl_newstate(struct ieee80211vap *, enum ieee80211_state, int);
static int allocstaid(struct mwl_softc *sc, int aid);
static void delstaid(struct mwl_softc *sc, int staid);
static void mwl_newassoc(struct ieee80211_node *, int);
static void mwl_agestations(void *);
static int mwl_setregdomain(struct ieee80211com *,
struct ieee80211_regdomain *, int,
struct ieee80211_channel []);
static void mwl_getradiocaps(struct ieee80211com *, int, int *,
struct ieee80211_channel []);
static int mwl_getchannels(struct mwl_softc *);
static void mwl_sysctlattach(struct mwl_softc *);
static void mwl_announce(struct mwl_softc *);
SYSCTL_NODE(_hw, OID_AUTO, mwl, CTLFLAG_RD, 0, "Marvell driver parameters");
static int mwl_rxdesc = MWL_RXDESC; /* # rx desc's to allocate */
SYSCTL_INT(_hw_mwl, OID_AUTO, rxdesc, CTLFLAG_RW, &mwl_rxdesc,
0, "rx descriptors allocated");
static int mwl_rxbuf = MWL_RXBUF; /* # rx buffers to allocate */
SYSCTL_INT(_hw_mwl, OID_AUTO, rxbuf, CTLFLAG_RWTUN, &mwl_rxbuf,
0, "rx buffers allocated");
static int mwl_txbuf = MWL_TXBUF; /* # tx buffers to allocate */
SYSCTL_INT(_hw_mwl, OID_AUTO, txbuf, CTLFLAG_RWTUN, &mwl_txbuf,
0, "tx buffers allocated");
static int mwl_txcoalesce = 8; /* # tx packets to q before poking f/w*/
SYSCTL_INT(_hw_mwl, OID_AUTO, txcoalesce, CTLFLAG_RWTUN, &mwl_txcoalesce,
0, "tx buffers to send at once");
static int mwl_rxquota = MWL_RXBUF; /* # max buffers to process */
SYSCTL_INT(_hw_mwl, OID_AUTO, rxquota, CTLFLAG_RWTUN, &mwl_rxquota,
0, "max rx buffers to process per interrupt");
static int mwl_rxdmalow = 3; /* # min buffers for wakeup */
SYSCTL_INT(_hw_mwl, OID_AUTO, rxdmalow, CTLFLAG_RWTUN, &mwl_rxdmalow,
0, "min free rx buffers before restarting traffic");
#ifdef MWL_DEBUG
static int mwl_debug = 0;
SYSCTL_INT(_hw_mwl, OID_AUTO, debug, CTLFLAG_RWTUN, &mwl_debug,
0, "control debugging printfs");
enum {
MWL_DEBUG_XMIT = 0x00000001, /* basic xmit operation */
MWL_DEBUG_XMIT_DESC = 0x00000002, /* xmit descriptors */
MWL_DEBUG_RECV = 0x00000004, /* basic recv operation */
MWL_DEBUG_RECV_DESC = 0x00000008, /* recv descriptors */
MWL_DEBUG_RESET = 0x00000010, /* reset processing */
MWL_DEBUG_BEACON = 0x00000020, /* beacon handling */
MWL_DEBUG_INTR = 0x00000040, /* ISR */
MWL_DEBUG_TX_PROC = 0x00000080, /* tx ISR proc */
MWL_DEBUG_RX_PROC = 0x00000100, /* rx ISR proc */
MWL_DEBUG_KEYCACHE = 0x00000200, /* key cache management */
MWL_DEBUG_STATE = 0x00000400, /* 802.11 state transitions */
MWL_DEBUG_NODE = 0x00000800, /* node management */
MWL_DEBUG_RECV_ALL = 0x00001000, /* trace all frames (beacons) */
MWL_DEBUG_TSO = 0x00002000, /* TSO processing */
MWL_DEBUG_AMPDU = 0x00004000, /* BA stream handling */
MWL_DEBUG_ANY = 0xffffffff
};
#define IS_BEACON(wh) \
((wh->i_fc[0] & (IEEE80211_FC0_TYPE_MASK|IEEE80211_FC0_SUBTYPE_MASK)) == \
(IEEE80211_FC0_TYPE_MGT|IEEE80211_FC0_SUBTYPE_BEACON))
#define IFF_DUMPPKTS_RECV(sc, wh) \
((sc->sc_debug & MWL_DEBUG_RECV) && \
((sc->sc_debug & MWL_DEBUG_RECV_ALL) || !IS_BEACON(wh)))
#define IFF_DUMPPKTS_XMIT(sc) \
(sc->sc_debug & MWL_DEBUG_XMIT)
#define DPRINTF(sc, m, fmt, ...) do { \
if (sc->sc_debug & (m)) \
printf(fmt, __VA_ARGS__); \
} while (0)
#define KEYPRINTF(sc, hk, mac) do { \
if (sc->sc_debug & MWL_DEBUG_KEYCACHE) \
mwl_keyprint(sc, __func__, hk, mac); \
} while (0)
static void mwl_printrxbuf(const struct mwl_rxbuf *bf, u_int ix);
static void mwl_printtxbuf(const struct mwl_txbuf *bf, u_int qnum, u_int ix);
#else
#define IFF_DUMPPKTS_RECV(sc, wh) 0
#define IFF_DUMPPKTS_XMIT(sc) 0
#define DPRINTF(sc, m, fmt, ...) do { (void )sc; } while (0)
#define KEYPRINTF(sc, k, mac) do { (void )sc; } while (0)
#endif
static MALLOC_DEFINE(M_MWLDEV, "mwldev", "mwl driver dma buffers");
/*
* Each packet has fixed front matter: a 2-byte length
* of the payload, followed by a 4-address 802.11 header
* (regardless of the actual header and always w/o any
* QoS header). The payload then follows.
*/
struct mwltxrec {
uint16_t fwlen;
struct ieee80211_frame_addr4 wh;
} __packed;
/*
* Read/Write shorthands for accesses to BAR 0. Note
* that all BAR 1 operations are done in the "hal" and
* there should be no reference to them here.
*/
#ifdef MWL_DEBUG
static __inline uint32_t
RD4(struct mwl_softc *sc, bus_size_t off)
{
return bus_space_read_4(sc->sc_io0t, sc->sc_io0h, off);
}
#endif
static __inline void
WR4(struct mwl_softc *sc, bus_size_t off, uint32_t val)
{
bus_space_write_4(sc->sc_io0t, sc->sc_io0h, off, val);
}
int
mwl_attach(uint16_t devid, struct mwl_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct mwl_hal *mh;
int error = 0;
DPRINTF(sc, MWL_DEBUG_ANY, "%s: devid 0x%x\n", __func__, devid);
/*
* Setup the RX free list lock early, so it can be consistently
* removed.
*/
MWL_RXFREE_INIT(sc);
mh = mwl_hal_attach(sc->sc_dev, devid,
sc->sc_io1h, sc->sc_io1t, sc->sc_dmat);
if (mh == NULL) {
device_printf(sc->sc_dev, "unable to attach HAL\n");
error = EIO;
goto bad;
}
sc->sc_mh = mh;
/*
* Load firmware so we can get setup. We arbitrarily
* pick station firmware; we'll re-load firmware as
* needed so setting up the wrong mode isn't a big deal.
*/
if (mwl_hal_fwload(mh, NULL) != 0) {
device_printf(sc->sc_dev, "unable to setup builtin firmware\n");
error = EIO;
goto bad1;
}
if (mwl_hal_gethwspecs(mh, &sc->sc_hwspecs) != 0) {
device_printf(sc->sc_dev, "unable to fetch h/w specs\n");
error = EIO;
goto bad1;
}
error = mwl_getchannels(sc);
if (error != 0)
goto bad1;
sc->sc_txantenna = 0; /* h/w default */
sc->sc_rxantenna = 0; /* h/w default */
sc->sc_invalid = 0; /* ready to go, enable int handling */
sc->sc_ageinterval = MWL_AGEINTERVAL;
/*
* Allocate tx+rx descriptors and populate the lists.
* We immediately push the information to the firmware
* as otherwise it gets upset.
*/
error = mwl_dma_setup(sc);
if (error != 0) {
device_printf(sc->sc_dev, "failed to setup descriptors: %d\n",
error);
goto bad1;
}
error = mwl_setupdma(sc); /* push to firmware */
if (error != 0) /* NB: mwl_setupdma prints msg */
goto bad1;
callout_init(&sc->sc_timer, 1);
callout_init_mtx(&sc->sc_watchdog, &sc->sc_mtx, 0);
mbufq_init(&sc->sc_snd, ifqmaxlen);
sc->sc_tq = taskqueue_create("mwl_taskq", M_NOWAIT,
taskqueue_thread_enqueue, &sc->sc_tq);
taskqueue_start_threads(&sc->sc_tq, 1, PI_NET,
"%s taskq", device_get_nameunit(sc->sc_dev));
TASK_INIT(&sc->sc_rxtask, 0, mwl_rx_proc, sc);
TASK_INIT(&sc->sc_radartask, 0, mwl_radar_proc, sc);
TASK_INIT(&sc->sc_chanswitchtask, 0, mwl_chanswitch_proc, sc);
TASK_INIT(&sc->sc_bawatchdogtask, 0, mwl_bawatchdog_proc, sc);
/* NB: insure BK queue is the lowest priority h/w queue */
if (!mwl_tx_setup(sc, WME_AC_BK, MWL_WME_AC_BK)) {
device_printf(sc->sc_dev,
"unable to setup xmit queue for %s traffic!\n",
ieee80211_wme_acnames[WME_AC_BK]);
error = EIO;
goto bad2;
}
if (!mwl_tx_setup(sc, WME_AC_BE, MWL_WME_AC_BE) ||
!mwl_tx_setup(sc, WME_AC_VI, MWL_WME_AC_VI) ||
!mwl_tx_setup(sc, WME_AC_VO, MWL_WME_AC_VO)) {
/*
* Not enough hardware tx queues to properly do WME;
* just punt and assign them all to the same h/w queue.
* We could do a better job of this if, for example,
* we allocate queues when we switch from station to
* AP mode.
*/
if (sc->sc_ac2q[WME_AC_VI] != NULL)
mwl_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_VI]);
if (sc->sc_ac2q[WME_AC_BE] != NULL)
mwl_tx_cleanupq(sc, sc->sc_ac2q[WME_AC_BE]);
sc->sc_ac2q[WME_AC_BE] = sc->sc_ac2q[WME_AC_BK];
sc->sc_ac2q[WME_AC_VI] = sc->sc_ac2q[WME_AC_BK];
sc->sc_ac2q[WME_AC_VO] = sc->sc_ac2q[WME_AC_BK];
}
TASK_INIT(&sc->sc_txtask, 0, mwl_tx_proc, sc);
ic->ic_softc = sc;
ic->ic_name = device_get_nameunit(sc->sc_dev);
/* XXX not right but it's not used anywhere important */
ic->ic_phytype = IEEE80211_T_OFDM;
ic->ic_opmode = IEEE80211_M_STA;
ic->ic_caps =
IEEE80211_C_STA /* station mode supported */
| IEEE80211_C_HOSTAP /* hostap mode */
| IEEE80211_C_MONITOR /* monitor mode */
#if 0
| IEEE80211_C_IBSS /* ibss, nee adhoc, mode */
| IEEE80211_C_AHDEMO /* adhoc demo mode */
#endif
| IEEE80211_C_MBSS /* mesh point link mode */
| IEEE80211_C_WDS /* WDS supported */
| IEEE80211_C_SHPREAMBLE /* short preamble supported */
| IEEE80211_C_SHSLOT /* short slot time supported */
| IEEE80211_C_WME /* WME/WMM supported */
| IEEE80211_C_BURST /* xmit bursting supported */
| IEEE80211_C_WPA /* capable of WPA1+WPA2 */
| IEEE80211_C_BGSCAN /* capable of bg scanning */
| IEEE80211_C_TXFRAG /* handle tx frags */
| IEEE80211_C_TXPMGT /* capable of txpow mgt */
| IEEE80211_C_DFS /* DFS supported */
;
ic->ic_htcaps =
IEEE80211_HTCAP_SMPS_ENA /* SM PS mode enabled */
| IEEE80211_HTCAP_CHWIDTH40 /* 40MHz channel width */
| IEEE80211_HTCAP_SHORTGI20 /* short GI in 20MHz */
| IEEE80211_HTCAP_SHORTGI40 /* short GI in 40MHz */
| IEEE80211_HTCAP_RXSTBC_2STREAM/* 1-2 spatial streams */
#if MWL_AGGR_SIZE == 7935
| IEEE80211_HTCAP_MAXAMSDU_7935 /* max A-MSDU length */
#else
| IEEE80211_HTCAP_MAXAMSDU_3839 /* max A-MSDU length */
#endif
#if 0
| IEEE80211_HTCAP_PSMP /* PSMP supported */
| IEEE80211_HTCAP_40INTOLERANT /* 40MHz intolerant */
#endif
/* s/w capabilities */
| IEEE80211_HTC_HT /* HT operation */
| IEEE80211_HTC_AMPDU /* tx A-MPDU */
| IEEE80211_HTC_AMSDU /* tx A-MSDU */
| IEEE80211_HTC_SMPS /* SMPS available */
;
/*
* Mark h/w crypto support.
* XXX no way to query h/w support.
*/
ic->ic_cryptocaps |= IEEE80211_CRYPTO_WEP
| IEEE80211_CRYPTO_AES_CCM
| IEEE80211_CRYPTO_TKIP
| IEEE80211_CRYPTO_TKIPMIC
;
/*
* Transmit requires space in the packet for a special
* format transmit record and optional padding between
* this record and the payload. Ask the net80211 layer
* to arrange this when encapsulating packets so we can
* add it efficiently.
*/
ic->ic_headroom = sizeof(struct mwltxrec) -
sizeof(struct ieee80211_frame);
IEEE80211_ADDR_COPY(ic->ic_macaddr, sc->sc_hwspecs.macAddr);
/* call MI attach routine. */
ieee80211_ifattach(ic);
ic->ic_setregdomain = mwl_setregdomain;
ic->ic_getradiocaps = mwl_getradiocaps;
/* override default methods */
ic->ic_raw_xmit = mwl_raw_xmit;
ic->ic_newassoc = mwl_newassoc;
ic->ic_updateslot = mwl_updateslot;
ic->ic_update_mcast = mwl_update_mcast;
ic->ic_update_promisc = mwl_update_promisc;
ic->ic_wme.wme_update = mwl_wme_update;
ic->ic_transmit = mwl_transmit;
ic->ic_ioctl = mwl_ioctl;
ic->ic_parent = mwl_parent;
ic->ic_node_alloc = mwl_node_alloc;
sc->sc_node_cleanup = ic->ic_node_cleanup;
ic->ic_node_cleanup = mwl_node_cleanup;
sc->sc_node_drain = ic->ic_node_drain;
ic->ic_node_drain = mwl_node_drain;
ic->ic_node_getsignal = mwl_node_getsignal;
ic->ic_node_getmimoinfo = mwl_node_getmimoinfo;
ic->ic_scan_start = mwl_scan_start;
ic->ic_scan_end = mwl_scan_end;
ic->ic_set_channel = mwl_set_channel;
sc->sc_recv_action = ic->ic_recv_action;
ic->ic_recv_action = mwl_recv_action;
sc->sc_addba_request = ic->ic_addba_request;
ic->ic_addba_request = mwl_addba_request;
sc->sc_addba_response = ic->ic_addba_response;
ic->ic_addba_response = mwl_addba_response;
sc->sc_addba_stop = ic->ic_addba_stop;
ic->ic_addba_stop = mwl_addba_stop;
ic->ic_vap_create = mwl_vap_create;
ic->ic_vap_delete = mwl_vap_delete;
ieee80211_radiotap_attach(ic,
&sc->sc_tx_th.wt_ihdr, sizeof(sc->sc_tx_th),
MWL_TX_RADIOTAP_PRESENT,
&sc->sc_rx_th.wr_ihdr, sizeof(sc->sc_rx_th),
MWL_RX_RADIOTAP_PRESENT);
/*
* Setup dynamic sysctl's now that country code and
* regdomain are available from the hal.
*/
mwl_sysctlattach(sc);
if (bootverbose)
ieee80211_announce(ic);
mwl_announce(sc);
return 0;
bad2:
mwl_dma_cleanup(sc);
bad1:
mwl_hal_detach(mh);
bad:
MWL_RXFREE_DESTROY(sc);
sc->sc_invalid = 1;
return error;
}
int
mwl_detach(struct mwl_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
MWL_LOCK(sc);
mwl_stop(sc);
MWL_UNLOCK(sc);
/*
* NB: the order of these is important:
* o call the 802.11 layer before detaching the hal to
* insure callbacks into the driver to delete global
* key cache entries can be handled
* o reclaim the tx queue data structures after calling
* the 802.11 layer as we'll get called back to reclaim
* node state and potentially want to use them
* o to cleanup the tx queues the hal is called, so detach
* it last
* Other than that, it's straightforward...
*/
ieee80211_ifdetach(ic);
callout_drain(&sc->sc_watchdog);
mwl_dma_cleanup(sc);
MWL_RXFREE_DESTROY(sc);
mwl_tx_cleanup(sc);
mwl_hal_detach(sc->sc_mh);
mbufq_drain(&sc->sc_snd);
return 0;
}
/*
* MAC address handling for multiple BSS on the same radio.
* The first vap uses the MAC address from the EEPROM. For
* subsequent vap's we set the U/L bit (bit 1) in the MAC
* address and use the next six bits as an index.
*/
static void
assign_address(struct mwl_softc *sc, uint8_t mac[IEEE80211_ADDR_LEN], int clone)
{
int i;
if (clone && mwl_hal_ismbsscapable(sc->sc_mh)) {
/* NB: we only do this if h/w supports multiple bssid */
for (i = 0; i < 32; i++)
if ((sc->sc_bssidmask & (1<<i)) == 0)
break;
if (i != 0)
mac[0] |= (i << 2)|0x2;
} else
i = 0;
sc->sc_bssidmask |= 1<<i;
if (i == 0)
sc->sc_nbssid0++;
}
static void
reclaim_address(struct mwl_softc *sc, const uint8_t mac[IEEE80211_ADDR_LEN])
{
int i = mac[0] >> 2;
if (i != 0 || --sc->sc_nbssid0 == 0)
sc->sc_bssidmask &= ~(1<<i);
}
static struct ieee80211vap *
mwl_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit,
enum ieee80211_opmode opmode, int flags,
const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t mac0[IEEE80211_ADDR_LEN])
{
struct mwl_softc *sc = ic->ic_softc;
struct mwl_hal *mh = sc->sc_mh;
struct ieee80211vap *vap, *apvap;
struct mwl_hal_vap *hvap;
struct mwl_vap *mvp;
uint8_t mac[IEEE80211_ADDR_LEN];
IEEE80211_ADDR_COPY(mac, mac0);
switch (opmode) {
case IEEE80211_M_HOSTAP:
case IEEE80211_M_MBSS:
if ((flags & IEEE80211_CLONE_MACADDR) == 0)
assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID);
hvap = mwl_hal_newvap(mh, MWL_HAL_AP, mac);
if (hvap == NULL) {
if ((flags & IEEE80211_CLONE_MACADDR) == 0)
reclaim_address(sc, mac);
return NULL;
}
break;
case IEEE80211_M_STA:
if ((flags & IEEE80211_CLONE_MACADDR) == 0)
assign_address(sc, mac, flags & IEEE80211_CLONE_BSSID);
hvap = mwl_hal_newvap(mh, MWL_HAL_STA, mac);
if (hvap == NULL) {
if ((flags & IEEE80211_CLONE_MACADDR) == 0)
reclaim_address(sc, mac);
return NULL;
}
/* no h/w beacon miss support; always use s/w */
flags |= IEEE80211_CLONE_NOBEACONS;
break;
case IEEE80211_M_WDS:
hvap = NULL; /* NB: we use associated AP vap */
if (sc->sc_napvaps == 0)
return NULL; /* no existing AP vap */
break;
case IEEE80211_M_MONITOR:
hvap = NULL;
break;
case IEEE80211_M_IBSS:
case IEEE80211_M_AHDEMO:
default:
return NULL;
}
mvp = malloc(sizeof(struct mwl_vap), M_80211_VAP, M_WAITOK | M_ZERO);
mvp->mv_hvap = hvap;
if (opmode == IEEE80211_M_WDS) {
/*
* WDS vaps must have an associated AP vap; find one.
* XXX not right.
*/
TAILQ_FOREACH(apvap, &ic->ic_vaps, iv_next)
if (apvap->iv_opmode == IEEE80211_M_HOSTAP) {
mvp->mv_ap_hvap = MWL_VAP(apvap)->mv_hvap;
break;
}
KASSERT(mvp->mv_ap_hvap != NULL, ("no ap vap"));
}
vap = &mvp->mv_vap;
ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid);
/* override with driver methods */
mvp->mv_newstate = vap->iv_newstate;
vap->iv_newstate = mwl_newstate;
vap->iv_max_keyix = 0; /* XXX */
vap->iv_key_alloc = mwl_key_alloc;
vap->iv_key_delete = mwl_key_delete;
vap->iv_key_set = mwl_key_set;
#ifdef MWL_HOST_PS_SUPPORT
if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS) {
vap->iv_update_ps = mwl_update_ps;
mvp->mv_set_tim = vap->iv_set_tim;
vap->iv_set_tim = mwl_set_tim;
}
#endif
vap->iv_reset = mwl_reset;
vap->iv_update_beacon = mwl_beacon_update;
/* override max aid so sta's cannot assoc when we're out of sta id's */
vap->iv_max_aid = MWL_MAXSTAID;
/* override default A-MPDU rx parameters */
vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_64K;
vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_4;
/* complete setup */
ieee80211_vap_attach(vap, mwl_media_change, ieee80211_media_status,
mac);
switch (vap->iv_opmode) {
case IEEE80211_M_HOSTAP:
case IEEE80211_M_MBSS:
case IEEE80211_M_STA:
/*
* Setup sta db entry for local address.
*/
mwl_localstadb(vap);
if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_MBSS)
sc->sc_napvaps++;
else
sc->sc_nstavaps++;
break;
case IEEE80211_M_WDS:
sc->sc_nwdsvaps++;
break;
default:
break;
}
/*
* Setup overall operating mode.
*/
if (sc->sc_napvaps)
ic->ic_opmode = IEEE80211_M_HOSTAP;
else if (sc->sc_nstavaps)
ic->ic_opmode = IEEE80211_M_STA;
else
ic->ic_opmode = opmode;
return vap;
}
static void
mwl_vap_delete(struct ieee80211vap *vap)
{
struct mwl_vap *mvp = MWL_VAP(vap);
struct mwl_softc *sc = vap->iv_ic->ic_softc;
struct mwl_hal *mh = sc->sc_mh;
struct mwl_hal_vap *hvap = mvp->mv_hvap;
enum ieee80211_opmode opmode = vap->iv_opmode;
/* XXX disallow ap vap delete if WDS still present */
if (sc->sc_running) {
/* quiesce h/w while we remove the vap */
mwl_hal_intrset(mh, 0); /* disable interrupts */
}
ieee80211_vap_detach(vap);
switch (opmode) {
case IEEE80211_M_HOSTAP:
case IEEE80211_M_MBSS:
case IEEE80211_M_STA:
KASSERT(hvap != NULL, ("no hal vap handle"));
(void) mwl_hal_delstation(hvap, vap->iv_myaddr);
mwl_hal_delvap(hvap);
if (opmode == IEEE80211_M_HOSTAP || opmode == IEEE80211_M_MBSS)
sc->sc_napvaps--;
else
sc->sc_nstavaps--;
/* XXX don't do it for IEEE80211_CLONE_MACADDR */
reclaim_address(sc, vap->iv_myaddr);
break;
case IEEE80211_M_WDS:
sc->sc_nwdsvaps--;
break;
default:
break;
}
mwl_cleartxq(sc, vap);
free(mvp, M_80211_VAP);
if (sc->sc_running)
mwl_hal_intrset(mh, sc->sc_imask);
}
void
mwl_suspend(struct mwl_softc *sc)
{
MWL_LOCK(sc);
mwl_stop(sc);
MWL_UNLOCK(sc);
}
void
mwl_resume(struct mwl_softc *sc)
{
int error = EDOOFUS;
MWL_LOCK(sc);
if (sc->sc_ic.ic_nrunning > 0)
error = mwl_init(sc);
MWL_UNLOCK(sc);
if (error == 0)
ieee80211_start_all(&sc->sc_ic); /* start all vap's */
}
void
mwl_shutdown(void *arg)
{
struct mwl_softc *sc = arg;
MWL_LOCK(sc);
mwl_stop(sc);
MWL_UNLOCK(sc);
}
/*
* Interrupt handler. Most of the actual processing is deferred.
*/
void
mwl_intr(void *arg)
{
struct mwl_softc *sc = arg;
struct mwl_hal *mh = sc->sc_mh;
uint32_t status;
if (sc->sc_invalid) {
/*
* The hardware is not ready/present, don't touch anything.
* Note this can happen early on if the IRQ is shared.
*/
DPRINTF(sc, MWL_DEBUG_ANY, "%s: invalid; ignored\n", __func__);
return;
}
/*
* Figure out the reason(s) for the interrupt.
*/
mwl_hal_getisr(mh, &status); /* NB: clears ISR too */
if (status == 0) /* must be a shared irq */
return;
DPRINTF(sc, MWL_DEBUG_INTR, "%s: status 0x%x imask 0x%x\n",
__func__, status, sc->sc_imask);
if (status & MACREG_A2HRIC_BIT_RX_RDY)
taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask);
if (status & MACREG_A2HRIC_BIT_TX_DONE)
taskqueue_enqueue(sc->sc_tq, &sc->sc_txtask);
if (status & MACREG_A2HRIC_BIT_BA_WATCHDOG)
taskqueue_enqueue(sc->sc_tq, &sc->sc_bawatchdogtask);
if (status & MACREG_A2HRIC_BIT_OPC_DONE)
mwl_hal_cmddone(mh);
if (status & MACREG_A2HRIC_BIT_MAC_EVENT) {
;
}
if (status & MACREG_A2HRIC_BIT_ICV_ERROR) {
/* TKIP ICV error */
sc->sc_stats.mst_rx_badtkipicv++;
}
if (status & MACREG_A2HRIC_BIT_QUEUE_EMPTY) {
/* 11n aggregation queue is empty, re-fill */
;
}
if (status & MACREG_A2HRIC_BIT_QUEUE_FULL) {
;
}
if (status & MACREG_A2HRIC_BIT_RADAR_DETECT) {
/* radar detected, process event */
taskqueue_enqueue(sc->sc_tq, &sc->sc_radartask);
}
if (status & MACREG_A2HRIC_BIT_CHAN_SWITCH) {
/* DFS channel switch */
taskqueue_enqueue(sc->sc_tq, &sc->sc_chanswitchtask);
}
}
static void
mwl_radar_proc(void *arg, int pending)
{
struct mwl_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
DPRINTF(sc, MWL_DEBUG_ANY, "%s: radar detected, pending %u\n",
__func__, pending);
sc->sc_stats.mst_radardetect++;
/* XXX stop h/w BA streams? */
IEEE80211_LOCK(ic);
ieee80211_dfs_notify_radar(ic, ic->ic_curchan);
IEEE80211_UNLOCK(ic);
}
static void
mwl_chanswitch_proc(void *arg, int pending)
{
struct mwl_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
DPRINTF(sc, MWL_DEBUG_ANY, "%s: channel switch notice, pending %u\n",
__func__, pending);
IEEE80211_LOCK(ic);
sc->sc_csapending = 0;
ieee80211_csa_completeswitch(ic);
IEEE80211_UNLOCK(ic);
}
static void
mwl_bawatchdog(const MWL_HAL_BASTREAM *sp)
{
struct ieee80211_node *ni = sp->data[0];
/* send DELBA and drop the stream */
ieee80211_ampdu_stop(ni, sp->data[1], IEEE80211_REASON_UNSPECIFIED);
}
static void
mwl_bawatchdog_proc(void *arg, int pending)
{
struct mwl_softc *sc = arg;
struct mwl_hal *mh = sc->sc_mh;
const MWL_HAL_BASTREAM *sp;
uint8_t bitmap, n;
sc->sc_stats.mst_bawatchdog++;
if (mwl_hal_getwatchdogbitmap(mh, &bitmap) != 0) {
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: could not get bitmap\n", __func__);
sc->sc_stats.mst_bawatchdog_failed++;
return;
}
DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: bitmap 0x%x\n", __func__, bitmap);
if (bitmap == 0xff) {
n = 0;
/* disable all ba streams */
for (bitmap = 0; bitmap < 8; bitmap++) {
sp = mwl_hal_bastream_lookup(mh, bitmap);
if (sp != NULL) {
mwl_bawatchdog(sp);
n++;
}
}
if (n == 0) {
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: no BA streams found\n", __func__);
sc->sc_stats.mst_bawatchdog_empty++;
}
} else if (bitmap != 0xaa) {
/* disable a single ba stream */
sp = mwl_hal_bastream_lookup(mh, bitmap);
if (sp != NULL) {
mwl_bawatchdog(sp);
} else {
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: no BA stream %d\n", __func__, bitmap);
sc->sc_stats.mst_bawatchdog_notfound++;
}
}
}
/*
* Convert net80211 channel to a HAL channel.
*/
static void
mwl_mapchan(MWL_HAL_CHANNEL *hc, const struct ieee80211_channel *chan)
{
hc->channel = chan->ic_ieee;
*(uint32_t *)&hc->channelFlags = 0;
if (IEEE80211_IS_CHAN_2GHZ(chan))
hc->channelFlags.FreqBand = MWL_FREQ_BAND_2DOT4GHZ;
else if (IEEE80211_IS_CHAN_5GHZ(chan))
hc->channelFlags.FreqBand = MWL_FREQ_BAND_5GHZ;
if (IEEE80211_IS_CHAN_HT40(chan)) {
hc->channelFlags.ChnlWidth = MWL_CH_40_MHz_WIDTH;
if (IEEE80211_IS_CHAN_HT40U(chan))
hc->channelFlags.ExtChnlOffset = MWL_EXT_CH_ABOVE_CTRL_CH;
else
hc->channelFlags.ExtChnlOffset = MWL_EXT_CH_BELOW_CTRL_CH;
} else
hc->channelFlags.ChnlWidth = MWL_CH_20_MHz_WIDTH;
/* XXX 10MHz channels */
}
/*
* Inform firmware of our tx/rx dma setup. The BAR 0
* writes below are for compatibility with older firmware.
* For current firmware we send this information with a
* cmd block via mwl_hal_sethwdma.
*/
static int
mwl_setupdma(struct mwl_softc *sc)
{
int error, i;
sc->sc_hwdma.rxDescRead = sc->sc_rxdma.dd_desc_paddr;
WR4(sc, sc->sc_hwspecs.rxDescRead, sc->sc_hwdma.rxDescRead);
WR4(sc, sc->sc_hwspecs.rxDescWrite, sc->sc_hwdma.rxDescRead);
for (i = 0; i < MWL_NUM_TX_QUEUES-MWL_NUM_ACK_QUEUES; i++) {
struct mwl_txq *txq = &sc->sc_txq[i];
sc->sc_hwdma.wcbBase[i] = txq->dma.dd_desc_paddr;
WR4(sc, sc->sc_hwspecs.wcbBase[i], sc->sc_hwdma.wcbBase[i]);
}
sc->sc_hwdma.maxNumTxWcb = mwl_txbuf;
sc->sc_hwdma.maxNumWCB = MWL_NUM_TX_QUEUES-MWL_NUM_ACK_QUEUES;
error = mwl_hal_sethwdma(sc->sc_mh, &sc->sc_hwdma);
if (error != 0) {
device_printf(sc->sc_dev,
"unable to setup tx/rx dma; hal status %u\n", error);
/* XXX */
}
return error;
}
/*
* Inform firmware of tx rate parameters.
* Called after a channel change.
*/
static int
mwl_setcurchanrates(struct mwl_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
const struct ieee80211_rateset *rs;
MWL_HAL_TXRATE rates;
memset(&rates, 0, sizeof(rates));
rs = ieee80211_get_suprates(ic, ic->ic_curchan);
/* rate used to send management frames */
rates.MgtRate = rs->rs_rates[0] & IEEE80211_RATE_VAL;
/* rate used to send multicast frames */
rates.McastRate = rates.MgtRate;
return mwl_hal_settxrate_auto(sc->sc_mh, &rates);
}
/*
* Inform firmware of tx rate parameters. Called whenever
* user-settable params change and after a channel change.
*/
static int
mwl_setrates(struct ieee80211vap *vap)
{
struct mwl_vap *mvp = MWL_VAP(vap);
struct ieee80211_node *ni = vap->iv_bss;
const struct ieee80211_txparam *tp = ni->ni_txparms;
MWL_HAL_TXRATE rates;
KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state));
/*
* Update the h/w rate map.
* NB: 0x80 for MCS is passed through unchanged
*/
memset(&rates, 0, sizeof(rates));
/* rate used to send management frames */
rates.MgtRate = tp->mgmtrate;
/* rate used to send multicast frames */
rates.McastRate = tp->mcastrate;
/* while here calculate EAPOL fixed rate cookie */
mvp->mv_eapolformat = htole16(mwl_calcformat(rates.MgtRate, ni));
return mwl_hal_settxrate(mvp->mv_hvap,
tp->ucastrate != IEEE80211_FIXED_RATE_NONE ?
RATE_FIXED : RATE_AUTO, &rates);
}
/*
* Setup a fixed xmit rate cookie for EAPOL frames.
*/
static void
mwl_seteapolformat(struct ieee80211vap *vap)
{
struct mwl_vap *mvp = MWL_VAP(vap);
struct ieee80211_node *ni = vap->iv_bss;
enum ieee80211_phymode mode;
uint8_t rate;
KASSERT(vap->iv_state == IEEE80211_S_RUN, ("state %d", vap->iv_state));
mode = ieee80211_chan2mode(ni->ni_chan);
/*
* Use legacy rates when operating a mixed HT+non-HT bss.
* NB: this may violate POLA for sta and wds vap's.
*/
if (mode == IEEE80211_MODE_11NA &&
(vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
rate = vap->iv_txparms[IEEE80211_MODE_11A].mgmtrate;
else if (mode == IEEE80211_MODE_11NG &&
(vap->iv_flags_ht & IEEE80211_FHT_PUREN) == 0)
rate = vap->iv_txparms[IEEE80211_MODE_11G].mgmtrate;
else
rate = vap->iv_txparms[mode].mgmtrate;
mvp->mv_eapolformat = htole16(mwl_calcformat(rate, ni));
}
/*
* Map SKU+country code to region code for radar bin'ing.
*/
static int
mwl_map2regioncode(const struct ieee80211_regdomain *rd)
{
switch (rd->regdomain) {
case SKU_FCC:
case SKU_FCC3:
return DOMAIN_CODE_FCC;
case SKU_CA:
return DOMAIN_CODE_IC;
case SKU_ETSI:
case SKU_ETSI2:
case SKU_ETSI3:
if (rd->country == CTRY_SPAIN)
return DOMAIN_CODE_SPAIN;
if (rd->country == CTRY_FRANCE || rd->country == CTRY_FRANCE2)
return DOMAIN_CODE_FRANCE;
/* XXX force 1.3.1 radar type */
return DOMAIN_CODE_ETSI_131;
case SKU_JAPAN:
return DOMAIN_CODE_MKK;
case SKU_ROW:
return DOMAIN_CODE_DGT; /* Taiwan */
case SKU_APAC:
case SKU_APAC2:
case SKU_APAC3:
return DOMAIN_CODE_AUS; /* Australia */
}
/* XXX KOREA? */
return DOMAIN_CODE_FCC; /* XXX? */
}
static int
mwl_hal_reset(struct mwl_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct mwl_hal *mh = sc->sc_mh;
mwl_hal_setantenna(mh, WL_ANTENNATYPE_RX, sc->sc_rxantenna);
mwl_hal_setantenna(mh, WL_ANTENNATYPE_TX, sc->sc_txantenna);
mwl_hal_setradio(mh, 1, WL_AUTO_PREAMBLE);
mwl_hal_setwmm(sc->sc_mh, (ic->ic_flags & IEEE80211_F_WME) != 0);
mwl_chan_set(sc, ic->ic_curchan);
/* NB: RF/RA performance tuned for indoor mode */
mwl_hal_setrateadaptmode(mh, 0);
mwl_hal_setoptimizationlevel(mh,
(ic->ic_flags & IEEE80211_F_BURST) != 0);
mwl_hal_setregioncode(mh, mwl_map2regioncode(&ic->ic_regdomain));
mwl_hal_setaggampduratemode(mh, 1, 80); /* XXX */
mwl_hal_setcfend(mh, 0); /* XXX */
return 1;
}
static int
mwl_init(struct mwl_softc *sc)
{
struct mwl_hal *mh = sc->sc_mh;
int error = 0;
MWL_LOCK_ASSERT(sc);
/*
* Stop anything previously setup. This is safe
* whether this is the first time through or not.
*/
mwl_stop(sc);
/*
* Push vap-independent state to the firmware.
*/
if (!mwl_hal_reset(sc)) {
device_printf(sc->sc_dev, "unable to reset hardware\n");
return EIO;
}
/*
* Setup recv (once); transmit is already good to go.
*/
error = mwl_startrecv(sc);
if (error != 0) {
device_printf(sc->sc_dev, "unable to start recv logic\n");
return error;
}
/*
* Enable interrupts.
*/
sc->sc_imask = MACREG_A2HRIC_BIT_RX_RDY
| MACREG_A2HRIC_BIT_TX_DONE
| MACREG_A2HRIC_BIT_OPC_DONE
#if 0
| MACREG_A2HRIC_BIT_MAC_EVENT
#endif
| MACREG_A2HRIC_BIT_ICV_ERROR
| MACREG_A2HRIC_BIT_RADAR_DETECT
| MACREG_A2HRIC_BIT_CHAN_SWITCH
#if 0
| MACREG_A2HRIC_BIT_QUEUE_EMPTY
#endif
| MACREG_A2HRIC_BIT_BA_WATCHDOG
| MACREQ_A2HRIC_BIT_TX_ACK
;
sc->sc_running = 1;
mwl_hal_intrset(mh, sc->sc_imask);
callout_reset(&sc->sc_watchdog, hz, mwl_watchdog, sc);
return 0;
}
static void
mwl_stop(struct mwl_softc *sc)
{
MWL_LOCK_ASSERT(sc);
if (sc->sc_running) {
/*
* Shutdown the hardware and driver.
*/
sc->sc_running = 0;
callout_stop(&sc->sc_watchdog);
sc->sc_tx_timer = 0;
mwl_draintxq(sc);
}
}
static int
mwl_reset_vap(struct ieee80211vap *vap, int state)
{
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
struct ieee80211com *ic = vap->iv_ic;
if (state == IEEE80211_S_RUN)
mwl_setrates(vap);
/* XXX off by 1? */
mwl_hal_setrtsthreshold(hvap, vap->iv_rtsthreshold);
/* XXX auto? 20/40 split? */
mwl_hal_sethtgi(hvap, (vap->iv_flags_ht &
(IEEE80211_FHT_SHORTGI20|IEEE80211_FHT_SHORTGI40)) ? 1 : 0);
mwl_hal_setnprot(hvap, ic->ic_htprotmode == IEEE80211_PROT_NONE ?
HTPROTECT_NONE : HTPROTECT_AUTO);
/* XXX txpower cap */
/* re-setup beacons */
if (state == IEEE80211_S_RUN &&
(vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_MBSS ||
vap->iv_opmode == IEEE80211_M_IBSS)) {
mwl_setapmode(vap, vap->iv_bss->ni_chan);
mwl_hal_setnprotmode(hvap,
MS(ic->ic_curhtprotmode, IEEE80211_HTINFO_OPMODE));
return mwl_beacon_setup(vap);
}
return 0;
}
/*
* Reset the hardware w/o losing operational state.
* Used to to reset or reload hardware state for a vap.
*/
static int
mwl_reset(struct ieee80211vap *vap, u_long cmd)
{
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
int error = 0;
if (hvap != NULL) { /* WDS, MONITOR, etc. */
struct ieee80211com *ic = vap->iv_ic;
struct mwl_softc *sc = ic->ic_softc;
struct mwl_hal *mh = sc->sc_mh;
/* XXX handle DWDS sta vap change */
/* XXX do we need to disable interrupts? */
mwl_hal_intrset(mh, 0); /* disable interrupts */
error = mwl_reset_vap(vap, vap->iv_state);
mwl_hal_intrset(mh, sc->sc_imask);
}
return error;
}
/*
* Allocate a tx buffer for sending a frame. The
* packet is assumed to have the WME AC stored so
* we can use it to select the appropriate h/w queue.
*/
static struct mwl_txbuf *
mwl_gettxbuf(struct mwl_softc *sc, struct mwl_txq *txq)
{
struct mwl_txbuf *bf;
/*
* Grab a TX buffer and associated resources.
*/
MWL_TXQ_LOCK(txq);
bf = STAILQ_FIRST(&txq->free);
if (bf != NULL) {
STAILQ_REMOVE_HEAD(&txq->free, bf_list);
txq->nfree--;
}
MWL_TXQ_UNLOCK(txq);
if (bf == NULL)
DPRINTF(sc, MWL_DEBUG_XMIT,
"%s: out of xmit buffers on q %d\n", __func__, txq->qnum);
return bf;
}
/*
* Return a tx buffer to the queue it came from. Note there
* are two cases because we must preserve the order of buffers
* as it reflects the fixed order of descriptors in memory
* (the firmware pre-fetches descriptors so we cannot reorder).
*/
static void
mwl_puttxbuf_head(struct mwl_txq *txq, struct mwl_txbuf *bf)
{
bf->bf_m = NULL;
bf->bf_node = NULL;
MWL_TXQ_LOCK(txq);
STAILQ_INSERT_HEAD(&txq->free, bf, bf_list);
txq->nfree++;
MWL_TXQ_UNLOCK(txq);
}
static void
mwl_puttxbuf_tail(struct mwl_txq *txq, struct mwl_txbuf *bf)
{
bf->bf_m = NULL;
bf->bf_node = NULL;
MWL_TXQ_LOCK(txq);
STAILQ_INSERT_TAIL(&txq->free, bf, bf_list);
txq->nfree++;
MWL_TXQ_UNLOCK(txq);
}
static int
mwl_transmit(struct ieee80211com *ic, struct mbuf *m)
{
struct mwl_softc *sc = ic->ic_softc;
int error;
MWL_LOCK(sc);
if (!sc->sc_running) {
MWL_UNLOCK(sc);
return (ENXIO);
}
error = mbufq_enqueue(&sc->sc_snd, m);
if (error) {
MWL_UNLOCK(sc);
return (error);
}
mwl_start(sc);
MWL_UNLOCK(sc);
return (0);
}
static void
mwl_start(struct mwl_softc *sc)
{
struct ieee80211_node *ni;
struct mwl_txbuf *bf;
struct mbuf *m;
struct mwl_txq *txq = NULL; /* XXX silence gcc */
int nqueued;
MWL_LOCK_ASSERT(sc);
if (!sc->sc_running || sc->sc_invalid)
return;
nqueued = 0;
while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) {
/*
* Grab the node for the destination.
*/
ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
KASSERT(ni != NULL, ("no node"));
m->m_pkthdr.rcvif = NULL; /* committed, clear ref */
/*
* Grab a TX buffer and associated resources.
* We honor the classification by the 802.11 layer.
*/
txq = sc->sc_ac2q[M_WME_GETAC(m)];
bf = mwl_gettxbuf(sc, txq);
if (bf == NULL) {
m_freem(m);
ieee80211_free_node(ni);
#ifdef MWL_TX_NODROP
sc->sc_stats.mst_tx_qstop++;
break;
#else
DPRINTF(sc, MWL_DEBUG_XMIT,
"%s: tail drop on q %d\n", __func__, txq->qnum);
sc->sc_stats.mst_tx_qdrop++;
continue;
#endif /* MWL_TX_NODROP */
}
/*
* Pass the frame to the h/w for transmission.
*/
if (mwl_tx_start(sc, ni, bf, m)) {
if_inc_counter(ni->ni_vap->iv_ifp,
IFCOUNTER_OERRORS, 1);
mwl_puttxbuf_head(txq, bf);
ieee80211_free_node(ni);
continue;
}
nqueued++;
if (nqueued >= mwl_txcoalesce) {
/*
* Poke the firmware to process queued frames;
* see below about (lack of) locking.
*/
nqueued = 0;
mwl_hal_txstart(sc->sc_mh, 0/*XXX*/);
}
}
if (nqueued) {
/*
* NB: We don't need to lock against tx done because
* this just prods the firmware to check the transmit
* descriptors. The firmware will also start fetching
* descriptors by itself if it notices new ones are
* present when it goes to deliver a tx done interrupt
* to the host. So if we race with tx done processing
* it's ok. Delivering the kick here rather than in
* mwl_tx_start is an optimization to avoid poking the
* firmware for each packet.
*
* NB: the queue id isn't used so 0 is ok.
*/
mwl_hal_txstart(sc->sc_mh, 0/*XXX*/);
}
}
static int
mwl_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_bpf_params *params)
{
struct ieee80211com *ic = ni->ni_ic;
struct mwl_softc *sc = ic->ic_softc;
struct mwl_txbuf *bf;
struct mwl_txq *txq;
if (!sc->sc_running || sc->sc_invalid) {
m_freem(m);
return ENETDOWN;
}
/*
* Grab a TX buffer and associated resources.
* Note that we depend on the classification
* by the 802.11 layer to get to the right h/w
* queue. Management frames must ALWAYS go on
* queue 1 but we cannot just force that here
* because we may receive non-mgt frames.
*/
txq = sc->sc_ac2q[M_WME_GETAC(m)];
bf = mwl_gettxbuf(sc, txq);
if (bf == NULL) {
sc->sc_stats.mst_tx_qstop++;
m_freem(m);
return ENOBUFS;
}
/*
* Pass the frame to the h/w for transmission.
*/
if (mwl_tx_start(sc, ni, bf, m)) {
mwl_puttxbuf_head(txq, bf);
return EIO; /* XXX */
}
/*
* NB: We don't need to lock against tx done because
* this just prods the firmware to check the transmit
* descriptors. The firmware will also start fetching
* descriptors by itself if it notices new ones are
* present when it goes to deliver a tx done interrupt
* to the host. So if we race with tx done processing
* it's ok. Delivering the kick here rather than in
* mwl_tx_start is an optimization to avoid poking the
* firmware for each packet.
*
* NB: the queue id isn't used so 0 is ok.
*/
mwl_hal_txstart(sc->sc_mh, 0/*XXX*/);
return 0;
}
static int
mwl_media_change(struct ifnet *ifp)
{
struct ieee80211vap *vap = ifp->if_softc;
int error;
error = ieee80211_media_change(ifp);
/* NB: only the fixed rate can change and that doesn't need a reset */
if (error == ENETRESET) {
mwl_setrates(vap);
error = 0;
}
return error;
}
#ifdef MWL_DEBUG
static void
mwl_keyprint(struct mwl_softc *sc, const char *tag,
const MWL_HAL_KEYVAL *hk, const uint8_t mac[IEEE80211_ADDR_LEN])
{
static const char *ciphers[] = {
"WEP",
"TKIP",
"AES-CCM",
};
int i, n;
printf("%s: [%u] %-7s", tag, hk->keyIndex, ciphers[hk->keyTypeId]);
for (i = 0, n = hk->keyLen; i < n; i++)
printf(" %02x", hk->key.aes[i]);
printf(" mac %s", ether_sprintf(mac));
if (hk->keyTypeId == KEY_TYPE_ID_TKIP) {
printf(" %s", "rxmic");
for (i = 0; i < sizeof(hk->key.tkip.rxMic); i++)
printf(" %02x", hk->key.tkip.rxMic[i]);
printf(" txmic");
for (i = 0; i < sizeof(hk->key.tkip.txMic); i++)
printf(" %02x", hk->key.tkip.txMic[i]);
}
printf(" flags 0x%x\n", hk->keyFlags);
}
#endif
/*
* Allocate a key cache slot for a unicast key. The
* firmware handles key allocation and every station is
* guaranteed key space so we are always successful.
*/
static int
mwl_key_alloc(struct ieee80211vap *vap, struct ieee80211_key *k,
ieee80211_keyix *keyix, ieee80211_keyix *rxkeyix)
{
struct mwl_softc *sc = vap->iv_ic->ic_softc;
if (k->wk_keyix != IEEE80211_KEYIX_NONE ||
(k->wk_flags & IEEE80211_KEY_GROUP)) {
if (!(&vap->iv_nw_keys[0] <= k &&
k < &vap->iv_nw_keys[IEEE80211_WEP_NKID])) {
/* should not happen */
DPRINTF(sc, MWL_DEBUG_KEYCACHE,
"%s: bogus group key\n", __func__);
return 0;
}
/* give the caller what they requested */
*keyix = *rxkeyix = ieee80211_crypto_get_key_wepidx(vap, k);
} else {
/*
* Firmware handles key allocation.
*/
*keyix = *rxkeyix = 0;
}
return 1;
}
/*
* Delete a key entry allocated by mwl_key_alloc.
*/
static int
mwl_key_delete(struct ieee80211vap *vap, const struct ieee80211_key *k)
{
struct mwl_softc *sc = vap->iv_ic->ic_softc;
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
MWL_HAL_KEYVAL hk;
const uint8_t bcastaddr[IEEE80211_ADDR_LEN] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
if (hvap == NULL) {
if (vap->iv_opmode != IEEE80211_M_WDS) {
/* XXX monitor mode? */
DPRINTF(sc, MWL_DEBUG_KEYCACHE,
"%s: no hvap for opmode %d\n", __func__,
vap->iv_opmode);
return 0;
}
hvap = MWL_VAP(vap)->mv_ap_hvap;
}
DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: delete key %u\n",
__func__, k->wk_keyix);
memset(&hk, 0, sizeof(hk));
hk.keyIndex = k->wk_keyix;
switch (k->wk_cipher->ic_cipher) {
case IEEE80211_CIPHER_WEP:
hk.keyTypeId = KEY_TYPE_ID_WEP;
break;
case IEEE80211_CIPHER_TKIP:
hk.keyTypeId = KEY_TYPE_ID_TKIP;
break;
case IEEE80211_CIPHER_AES_CCM:
hk.keyTypeId = KEY_TYPE_ID_AES;
break;
default:
/* XXX should not happen */
DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: unknown cipher %d\n",
__func__, k->wk_cipher->ic_cipher);
return 0;
}
return (mwl_hal_keyreset(hvap, &hk, bcastaddr) == 0); /*XXX*/
}
static __inline int
addgroupflags(MWL_HAL_KEYVAL *hk, const struct ieee80211_key *k)
{
if (k->wk_flags & IEEE80211_KEY_GROUP) {
if (k->wk_flags & IEEE80211_KEY_XMIT)
hk->keyFlags |= KEY_FLAG_TXGROUPKEY;
if (k->wk_flags & IEEE80211_KEY_RECV)
hk->keyFlags |= KEY_FLAG_RXGROUPKEY;
return 1;
} else
return 0;
}
/*
* Set the key cache contents for the specified key. Key cache
* slot(s) must already have been allocated by mwl_key_alloc.
*/
static int
mwl_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k)
{
return (_mwl_key_set(vap, k, k->wk_macaddr));
}
static int
_mwl_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k,
const uint8_t mac[IEEE80211_ADDR_LEN])
{
#define GRPXMIT (IEEE80211_KEY_XMIT | IEEE80211_KEY_GROUP)
/* NB: static wep keys are marked GROUP+tx/rx; GTK will be tx or rx */
#define IEEE80211_IS_STATICKEY(k) \
(((k)->wk_flags & (GRPXMIT|IEEE80211_KEY_RECV)) == \
(GRPXMIT|IEEE80211_KEY_RECV))
struct mwl_softc *sc = vap->iv_ic->ic_softc;
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
const struct ieee80211_cipher *cip = k->wk_cipher;
const uint8_t *macaddr;
MWL_HAL_KEYVAL hk;
KASSERT((k->wk_flags & IEEE80211_KEY_SWCRYPT) == 0,
("s/w crypto set?"));
if (hvap == NULL) {
if (vap->iv_opmode != IEEE80211_M_WDS) {
/* XXX monitor mode? */
DPRINTF(sc, MWL_DEBUG_KEYCACHE,
"%s: no hvap for opmode %d\n", __func__,
vap->iv_opmode);
return 0;
}
hvap = MWL_VAP(vap)->mv_ap_hvap;
}
memset(&hk, 0, sizeof(hk));
hk.keyIndex = k->wk_keyix;
switch (cip->ic_cipher) {
case IEEE80211_CIPHER_WEP:
hk.keyTypeId = KEY_TYPE_ID_WEP;
hk.keyLen = k->wk_keylen;
if (k->wk_keyix == vap->iv_def_txkey)
hk.keyFlags = KEY_FLAG_WEP_TXKEY;
if (!IEEE80211_IS_STATICKEY(k)) {
/* NB: WEP is never used for the PTK */
(void) addgroupflags(&hk, k);
}
break;
case IEEE80211_CIPHER_TKIP:
hk.keyTypeId = KEY_TYPE_ID_TKIP;
hk.key.tkip.tsc.high = (uint32_t)(k->wk_keytsc >> 16);
hk.key.tkip.tsc.low = (uint16_t)k->wk_keytsc;
hk.keyFlags = KEY_FLAG_TSC_VALID | KEY_FLAG_MICKEY_VALID;
hk.keyLen = k->wk_keylen + IEEE80211_MICBUF_SIZE;
if (!addgroupflags(&hk, k))
hk.keyFlags |= KEY_FLAG_PAIRWISE;
break;
case IEEE80211_CIPHER_AES_CCM:
hk.keyTypeId = KEY_TYPE_ID_AES;
hk.keyLen = k->wk_keylen;
if (!addgroupflags(&hk, k))
hk.keyFlags |= KEY_FLAG_PAIRWISE;
break;
default:
/* XXX should not happen */
DPRINTF(sc, MWL_DEBUG_KEYCACHE, "%s: unknown cipher %d\n",
__func__, k->wk_cipher->ic_cipher);
return 0;
}
/*
* NB: tkip mic keys get copied here too; the layout
* just happens to match that in ieee80211_key.
*/
memcpy(hk.key.aes, k->wk_key, hk.keyLen);
/*
* Locate address of sta db entry for writing key;
* the convention unfortunately is somewhat different
* than how net80211, hostapd, and wpa_supplicant think.
*/
if (vap->iv_opmode == IEEE80211_M_STA) {
/*
* NB: keys plumbed before the sta reaches AUTH state
* will be discarded or written to the wrong sta db
* entry because iv_bss is meaningless. This is ok
* (right now) because we handle deferred plumbing of
* WEP keys when the sta reaches AUTH state.
*/
macaddr = vap->iv_bss->ni_bssid;
if ((k->wk_flags & IEEE80211_KEY_GROUP) == 0) {
/* XXX plumb to local sta db too for static key wep */
mwl_hal_keyset(hvap, &hk, vap->iv_myaddr);
}
} else if (vap->iv_opmode == IEEE80211_M_WDS &&
vap->iv_state != IEEE80211_S_RUN) {
/*
* Prior to RUN state a WDS vap will not it's BSS node
* setup so we will plumb the key to the wrong mac
* address (it'll be our local address). Workaround
* this for the moment by grabbing the correct address.
*/
macaddr = vap->iv_des_bssid;
} else if ((k->wk_flags & GRPXMIT) == GRPXMIT)
macaddr = vap->iv_myaddr;
else
macaddr = mac;
KEYPRINTF(sc, &hk, macaddr);
return (mwl_hal_keyset(hvap, &hk, macaddr) == 0);
#undef IEEE80211_IS_STATICKEY
#undef GRPXMIT
}
/*
* Set the multicast filter contents into the hardware.
* XXX f/w has no support; just defer to the os.
*/
static void
mwl_setmcastfilter(struct mwl_softc *sc)
{
#if 0
struct ether_multi *enm;
struct ether_multistep estep;
uint8_t macs[IEEE80211_ADDR_LEN*MWL_HAL_MCAST_MAX];/* XXX stack use */
uint8_t *mp;
int nmc;
mp = macs;
nmc = 0;
ETHER_FIRST_MULTI(estep, &sc->sc_ec, enm);
while (enm != NULL) {
/* XXX Punt on ranges. */
if (nmc == MWL_HAL_MCAST_MAX ||
!IEEE80211_ADDR_EQ(enm->enm_addrlo, enm->enm_addrhi)) {
ifp->if_flags |= IFF_ALLMULTI;
return;
}
IEEE80211_ADDR_COPY(mp, enm->enm_addrlo);
mp += IEEE80211_ADDR_LEN, nmc++;
ETHER_NEXT_MULTI(estep, enm);
}
ifp->if_flags &= ~IFF_ALLMULTI;
mwl_hal_setmcast(sc->sc_mh, nmc, macs);
#endif
}
static int
mwl_mode_init(struct mwl_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct mwl_hal *mh = sc->sc_mh;
mwl_hal_setpromisc(mh, ic->ic_promisc > 0);
mwl_setmcastfilter(sc);
return 0;
}
/*
* Callback from the 802.11 layer after a multicast state change.
*/
static void
mwl_update_mcast(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
mwl_setmcastfilter(sc);
}
/*
* Callback from the 802.11 layer after a promiscuous mode change.
* Note this interface does not check the operating mode as this
* is an internal callback and we are expected to honor the current
* state (e.g. this is used for setting the interface in promiscuous
* mode when operating in hostap mode to do ACS).
*/
static void
mwl_update_promisc(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
mwl_hal_setpromisc(sc->sc_mh, ic->ic_promisc > 0);
}
/*
* Callback from the 802.11 layer to update the slot time
* based on the current setting. We use it to notify the
* firmware of ERP changes and the f/w takes care of things
* like slot time and preamble.
*/
static void
mwl_updateslot(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
struct mwl_hal *mh = sc->sc_mh;
int prot;
/* NB: can be called early; suppress needless cmds */
if (!sc->sc_running)
return;
/*
* Calculate the ERP flags. The firwmare will use
* this to carry out the appropriate measures.
*/
prot = 0;
if (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan)) {
if ((ic->ic_flags & IEEE80211_F_SHSLOT) == 0)
prot |= IEEE80211_ERP_NON_ERP_PRESENT;
if (ic->ic_flags & IEEE80211_F_USEPROT)
prot |= IEEE80211_ERP_USE_PROTECTION;
if (ic->ic_flags & IEEE80211_F_USEBARKER)
prot |= IEEE80211_ERP_LONG_PREAMBLE;
}
DPRINTF(sc, MWL_DEBUG_RESET,
"%s: chan %u MHz/flags 0x%x %s slot, (prot 0x%x ic_flags 0x%x)\n",
__func__, ic->ic_curchan->ic_freq, ic->ic_curchan->ic_flags,
ic->ic_flags & IEEE80211_F_SHSLOT ? "short" : "long", prot,
ic->ic_flags);
mwl_hal_setgprot(mh, prot);
}
/*
* Setup the beacon frame.
*/
static int
mwl_beacon_setup(struct ieee80211vap *vap)
{
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
struct ieee80211_node *ni = vap->iv_bss;
struct mbuf *m;
m = ieee80211_beacon_alloc(ni);
if (m == NULL)
return ENOBUFS;
mwl_hal_setbeacon(hvap, mtod(m, const void *), m->m_len);
m_free(m);
return 0;
}
/*
* Update the beacon frame in response to a change.
*/
static void
mwl_beacon_update(struct ieee80211vap *vap, int item)
{
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
struct ieee80211com *ic = vap->iv_ic;
KASSERT(hvap != NULL, ("no beacon"));
switch (item) {
case IEEE80211_BEACON_ERP:
mwl_updateslot(ic);
break;
case IEEE80211_BEACON_HTINFO:
mwl_hal_setnprotmode(hvap,
MS(ic->ic_curhtprotmode, IEEE80211_HTINFO_OPMODE));
break;
case IEEE80211_BEACON_CAPS:
case IEEE80211_BEACON_WME:
case IEEE80211_BEACON_APPIE:
case IEEE80211_BEACON_CSA:
break;
case IEEE80211_BEACON_TIM:
/* NB: firmware always forms TIM */
return;
}
/* XXX retain beacon frame and update */
mwl_beacon_setup(vap);
}
static void
mwl_load_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
bus_addr_t *paddr = (bus_addr_t*) arg;
KASSERT(error == 0, ("error %u on bus_dma callback", error));
*paddr = segs->ds_addr;
}
#ifdef MWL_HOST_PS_SUPPORT
/*
* Handle power save station occupancy changes.
*/
static void
mwl_update_ps(struct ieee80211vap *vap, int nsta)
{
struct mwl_vap *mvp = MWL_VAP(vap);
if (nsta == 0 || mvp->mv_last_ps_sta == 0)
mwl_hal_setpowersave_bss(mvp->mv_hvap, nsta);
mvp->mv_last_ps_sta = nsta;
}
/*
* Handle associated station power save state changes.
*/
static int
mwl_set_tim(struct ieee80211_node *ni, int set)
{
struct ieee80211vap *vap = ni->ni_vap;
struct mwl_vap *mvp = MWL_VAP(vap);
if (mvp->mv_set_tim(ni, set)) { /* NB: state change */
mwl_hal_setpowersave_sta(mvp->mv_hvap,
IEEE80211_AID(ni->ni_associd), set);
return 1;
} else
return 0;
}
#endif /* MWL_HOST_PS_SUPPORT */
static int
mwl_desc_setup(struct mwl_softc *sc, const char *name,
struct mwl_descdma *dd,
int nbuf, size_t bufsize, int ndesc, size_t descsize)
{
uint8_t *ds;
int error;
DPRINTF(sc, MWL_DEBUG_RESET,
"%s: %s DMA: %u bufs (%ju) %u desc/buf (%ju)\n",
__func__, name, nbuf, (uintmax_t) bufsize,
ndesc, (uintmax_t) descsize);
dd->dd_name = name;
dd->dd_desc_len = nbuf * ndesc * descsize;
/*
* Setup DMA descriptor area.
*/
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), /* parent */
PAGE_SIZE, 0, /* alignment, bounds */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
dd->dd_desc_len, /* maxsize */
1, /* nsegments */
dd->dd_desc_len, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&dd->dd_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "cannot allocate %s DMA tag\n", dd->dd_name);
return error;
}
/* allocate descriptors */
error = bus_dmamem_alloc(dd->dd_dmat, (void**) &dd->dd_desc,
BUS_DMA_NOWAIT | BUS_DMA_COHERENT,
&dd->dd_dmamap);
if (error != 0) {
device_printf(sc->sc_dev, "unable to alloc memory for %u %s descriptors, "
"error %u\n", nbuf * ndesc, dd->dd_name, error);
goto fail1;
}
error = bus_dmamap_load(dd->dd_dmat, dd->dd_dmamap,
dd->dd_desc, dd->dd_desc_len,
mwl_load_cb, &dd->dd_desc_paddr,
BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev, "unable to map %s descriptors, error %u\n",
dd->dd_name, error);
goto fail2;
}
ds = dd->dd_desc;
memset(ds, 0, dd->dd_desc_len);
DPRINTF(sc, MWL_DEBUG_RESET,
"%s: %s DMA map: %p (%lu) -> 0x%jx (%lu)\n",
__func__, dd->dd_name, ds, (u_long) dd->dd_desc_len,
(uintmax_t) dd->dd_desc_paddr, /*XXX*/ (u_long) dd->dd_desc_len);
return 0;
fail2:
bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap);
fail1:
bus_dma_tag_destroy(dd->dd_dmat);
memset(dd, 0, sizeof(*dd));
return error;
#undef DS2PHYS
}
static void
mwl_desc_cleanup(struct mwl_softc *sc, struct mwl_descdma *dd)
{
bus_dmamap_unload(dd->dd_dmat, dd->dd_dmamap);
bus_dmamem_free(dd->dd_dmat, dd->dd_desc, dd->dd_dmamap);
bus_dma_tag_destroy(dd->dd_dmat);
memset(dd, 0, sizeof(*dd));
}
/*
* Construct a tx q's free list. The order of entries on
* the list must reflect the physical layout of tx descriptors
* because the firmware pre-fetches descriptors.
*
* XXX might be better to use indices into the buffer array.
*/
static void
mwl_txq_reset(struct mwl_softc *sc, struct mwl_txq *txq)
{
struct mwl_txbuf *bf;
int i;
bf = txq->dma.dd_bufptr;
STAILQ_INIT(&txq->free);
for (i = 0; i < mwl_txbuf; i++, bf++)
STAILQ_INSERT_TAIL(&txq->free, bf, bf_list);
txq->nfree = i;
}
#define DS2PHYS(_dd, _ds) \
((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
static int
mwl_txdma_setup(struct mwl_softc *sc, struct mwl_txq *txq)
{
int error, bsize, i;
struct mwl_txbuf *bf;
struct mwl_txdesc *ds;
error = mwl_desc_setup(sc, "tx", &txq->dma,
mwl_txbuf, sizeof(struct mwl_txbuf),
MWL_TXDESC, sizeof(struct mwl_txdesc));
if (error != 0)
return error;
/* allocate and setup tx buffers */
bsize = mwl_txbuf * sizeof(struct mwl_txbuf);
bf = malloc(bsize, M_MWLDEV, M_NOWAIT | M_ZERO);
if (bf == NULL) {
device_printf(sc->sc_dev, "malloc of %u tx buffers failed\n",
mwl_txbuf);
return ENOMEM;
}
txq->dma.dd_bufptr = bf;
ds = txq->dma.dd_desc;
for (i = 0; i < mwl_txbuf; i++, bf++, ds += MWL_TXDESC) {
bf->bf_desc = ds;
bf->bf_daddr = DS2PHYS(&txq->dma, ds);
error = bus_dmamap_create(sc->sc_dmat, BUS_DMA_NOWAIT,
&bf->bf_dmamap);
if (error != 0) {
device_printf(sc->sc_dev, "unable to create dmamap for tx "
"buffer %u, error %u\n", i, error);
return error;
}
}
mwl_txq_reset(sc, txq);
return 0;
}
static void
mwl_txdma_cleanup(struct mwl_softc *sc, struct mwl_txq *txq)
{
struct mwl_txbuf *bf;
int i;
bf = txq->dma.dd_bufptr;
for (i = 0; i < mwl_txbuf; i++, bf++) {
KASSERT(bf->bf_m == NULL, ("mbuf on free list"));
KASSERT(bf->bf_node == NULL, ("node on free list"));
if (bf->bf_dmamap != NULL)
bus_dmamap_destroy(sc->sc_dmat, bf->bf_dmamap);
}
STAILQ_INIT(&txq->free);
txq->nfree = 0;
if (txq->dma.dd_bufptr != NULL) {
free(txq->dma.dd_bufptr, M_MWLDEV);
txq->dma.dd_bufptr = NULL;
}
if (txq->dma.dd_desc_len != 0)
mwl_desc_cleanup(sc, &txq->dma);
}
static int
mwl_rxdma_setup(struct mwl_softc *sc)
{
int error, jumbosize, bsize, i;
struct mwl_rxbuf *bf;
struct mwl_jumbo *rbuf;
struct mwl_rxdesc *ds;
caddr_t data;
error = mwl_desc_setup(sc, "rx", &sc->sc_rxdma,
mwl_rxdesc, sizeof(struct mwl_rxbuf),
1, sizeof(struct mwl_rxdesc));
if (error != 0)
return error;
/*
* Receive is done to a private pool of jumbo buffers.
* This allows us to attach to mbuf's and avoid re-mapping
* memory on each rx we post. We allocate a large chunk
* of memory and manage it in the driver. The mbuf free
* callback method is used to reclaim frames after sending
* them up the stack. By default we allocate 2x the number of
* rx descriptors configured so we have some slop to hold
* us while frames are processed.
*/
if (mwl_rxbuf < 2*mwl_rxdesc) {
device_printf(sc->sc_dev,
"too few rx dma buffers (%d); increasing to %d\n",
mwl_rxbuf, 2*mwl_rxdesc);
mwl_rxbuf = 2*mwl_rxdesc;
}
jumbosize = roundup(MWL_AGGR_SIZE, PAGE_SIZE);
sc->sc_rxmemsize = mwl_rxbuf*jumbosize;
error = bus_dma_tag_create(sc->sc_dmat, /* parent */
PAGE_SIZE, 0, /* alignment, bounds */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
sc->sc_rxmemsize, /* maxsize */
1, /* nsegments */
sc->sc_rxmemsize, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
NULL, /* lockfunc */
NULL, /* lockarg */
&sc->sc_rxdmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create rx DMA tag\n");
return error;
}
error = bus_dmamem_alloc(sc->sc_rxdmat, (void**) &sc->sc_rxmem,
BUS_DMA_NOWAIT | BUS_DMA_COHERENT,
&sc->sc_rxmap);
if (error != 0) {
device_printf(sc->sc_dev, "could not alloc %ju bytes of rx DMA memory\n",
(uintmax_t) sc->sc_rxmemsize);
return error;
}
error = bus_dmamap_load(sc->sc_rxdmat, sc->sc_rxmap,
sc->sc_rxmem, sc->sc_rxmemsize,
mwl_load_cb, &sc->sc_rxmem_paddr,
BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev, "could not load rx DMA map\n");
return error;
}
/*
* Allocate rx buffers and set them up.
*/
bsize = mwl_rxdesc * sizeof(struct mwl_rxbuf);
bf = malloc(bsize, M_MWLDEV, M_NOWAIT | M_ZERO);
if (bf == NULL) {
device_printf(sc->sc_dev, "malloc of %u rx buffers failed\n", bsize);
return error;
}
sc->sc_rxdma.dd_bufptr = bf;
STAILQ_INIT(&sc->sc_rxbuf);
ds = sc->sc_rxdma.dd_desc;
for (i = 0; i < mwl_rxdesc; i++, bf++, ds++) {
bf->bf_desc = ds;
bf->bf_daddr = DS2PHYS(&sc->sc_rxdma, ds);
/* pre-assign dma buffer */
bf->bf_data = ((uint8_t *)sc->sc_rxmem) + (i*jumbosize);
/* NB: tail is intentional to preserve descriptor order */
STAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list);
}
/*
* Place remainder of dma memory buffers on the free list.
*/
SLIST_INIT(&sc->sc_rxfree);
for (; i < mwl_rxbuf; i++) {
data = ((uint8_t *)sc->sc_rxmem) + (i*jumbosize);
rbuf = MWL_JUMBO_DATA2BUF(data);
SLIST_INSERT_HEAD(&sc->sc_rxfree, rbuf, next);
sc->sc_nrxfree++;
}
return 0;
}
#undef DS2PHYS
static void
mwl_rxdma_cleanup(struct mwl_softc *sc)
{
if (sc->sc_rxmem_paddr != 0) {
bus_dmamap_unload(sc->sc_rxdmat, sc->sc_rxmap);
sc->sc_rxmem_paddr = 0;
}
if (sc->sc_rxmem != NULL) {
bus_dmamem_free(sc->sc_rxdmat, sc->sc_rxmem, sc->sc_rxmap);
sc->sc_rxmem = NULL;
}
if (sc->sc_rxdma.dd_bufptr != NULL) {
free(sc->sc_rxdma.dd_bufptr, M_MWLDEV);
sc->sc_rxdma.dd_bufptr = NULL;
}
if (sc->sc_rxdma.dd_desc_len != 0)
mwl_desc_cleanup(sc, &sc->sc_rxdma);
}
static int
mwl_dma_setup(struct mwl_softc *sc)
{
int error, i;
error = mwl_rxdma_setup(sc);
if (error != 0) {
mwl_rxdma_cleanup(sc);
return error;
}
for (i = 0; i < MWL_NUM_TX_QUEUES; i++) {
error = mwl_txdma_setup(sc, &sc->sc_txq[i]);
if (error != 0) {
mwl_dma_cleanup(sc);
return error;
}
}
return 0;
}
static void
mwl_dma_cleanup(struct mwl_softc *sc)
{
int i;
for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
mwl_txdma_cleanup(sc, &sc->sc_txq[i]);
mwl_rxdma_cleanup(sc);
}
static struct ieee80211_node *
mwl_node_alloc(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct ieee80211com *ic = vap->iv_ic;
struct mwl_softc *sc = ic->ic_softc;
const size_t space = sizeof(struct mwl_node);
struct mwl_node *mn;
mn = malloc(space, M_80211_NODE, M_NOWAIT|M_ZERO);
if (mn == NULL) {
/* XXX stat+msg */
return NULL;
}
DPRINTF(sc, MWL_DEBUG_NODE, "%s: mn %p\n", __func__, mn);
return &mn->mn_node;
}
static void
mwl_node_cleanup(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct mwl_softc *sc = ic->ic_softc;
struct mwl_node *mn = MWL_NODE(ni);
DPRINTF(sc, MWL_DEBUG_NODE, "%s: ni %p ic %p staid %d\n",
__func__, ni, ni->ni_ic, mn->mn_staid);
if (mn->mn_staid != 0) {
struct ieee80211vap *vap = ni->ni_vap;
if (mn->mn_hvap != NULL) {
if (vap->iv_opmode == IEEE80211_M_STA)
mwl_hal_delstation(mn->mn_hvap, vap->iv_myaddr);
else
mwl_hal_delstation(mn->mn_hvap, ni->ni_macaddr);
}
/*
* NB: legacy WDS peer sta db entry is installed using
* the associate ap's hvap; use it again to delete it.
* XXX can vap be NULL?
*/
else if (vap->iv_opmode == IEEE80211_M_WDS &&
MWL_VAP(vap)->mv_ap_hvap != NULL)
mwl_hal_delstation(MWL_VAP(vap)->mv_ap_hvap,
ni->ni_macaddr);
delstaid(sc, mn->mn_staid);
mn->mn_staid = 0;
}
sc->sc_node_cleanup(ni);
}
/*
* Reclaim rx dma buffers from packets sitting on the ampdu
* reorder queue for a station. We replace buffers with a
* system cluster (if available).
*/
static void
mwl_ampdu_rxdma_reclaim(struct ieee80211_rx_ampdu *rap)
{
#if 0
int i, n, off;
struct mbuf *m;
void *cl;
n = rap->rxa_qframes;
for (i = 0; i < rap->rxa_wnd && n > 0; i++) {
m = rap->rxa_m[i];
if (m == NULL)
continue;
n--;
/* our dma buffers have a well-known free routine */
if ((m->m_flags & M_EXT) == 0 ||
m->m_ext.ext_free != mwl_ext_free)
continue;
/*
* Try to allocate a cluster and move the data.
*/
off = m->m_data - m->m_ext.ext_buf;
if (off + m->m_pkthdr.len > MCLBYTES) {
/* XXX no AMSDU for now */
continue;
}
cl = pool_cache_get_paddr(&mclpool_cache, 0,
&m->m_ext.ext_paddr);
if (cl != NULL) {
/*
* Copy the existing data to the cluster, remove
* the rx dma buffer, and attach the cluster in
* its place. Note we preserve the offset to the
* data so frames being bridged can still prepend
* their headers without adding another mbuf.
*/
memcpy((caddr_t) cl + off, m->m_data, m->m_pkthdr.len);
MEXTREMOVE(m);
MEXTADD(m, cl, MCLBYTES, 0, NULL, &mclpool_cache);
/* setup mbuf like _MCLGET does */
m->m_flags |= M_CLUSTER | M_EXT_RW;
_MOWNERREF(m, M_EXT | M_CLUSTER);
/* NB: m_data is clobbered by MEXTADDR, adjust */
m->m_data += off;
}
}
#endif
}
/*
* Callback to reclaim resources. We first let the
* net80211 layer do it's thing, then if we are still
* blocked by a lack of rx dma buffers we walk the ampdu
* reorder q's to reclaim buffers by copying to a system
* cluster.
*/
static void
mwl_node_drain(struct ieee80211_node *ni)
{
struct ieee80211com *ic = ni->ni_ic;
struct mwl_softc *sc = ic->ic_softc;
struct mwl_node *mn = MWL_NODE(ni);
DPRINTF(sc, MWL_DEBUG_NODE, "%s: ni %p vap %p staid %d\n",
__func__, ni, ni->ni_vap, mn->mn_staid);
/* NB: call up first to age out ampdu q's */
sc->sc_node_drain(ni);
/* XXX better to not check low water mark? */
if (sc->sc_rxblocked && mn->mn_staid != 0 &&
(ni->ni_flags & IEEE80211_NODE_HT)) {
uint8_t tid;
/*
* Walk the reorder q and reclaim rx dma buffers by copying
* the packet contents into clusters.
*/
for (tid = 0; tid < WME_NUM_TID; tid++) {
struct ieee80211_rx_ampdu *rap;
rap = &ni->ni_rx_ampdu[tid];
if ((rap->rxa_flags & IEEE80211_AGGR_XCHGPEND) == 0)
continue;
if (rap->rxa_qframes)
mwl_ampdu_rxdma_reclaim(rap);
}
}
}
static void
mwl_node_getsignal(const struct ieee80211_node *ni, int8_t *rssi, int8_t *noise)
{
*rssi = ni->ni_ic->ic_node_getrssi(ni);
#ifdef MWL_ANT_INFO_SUPPORT
#if 0
/* XXX need to smooth data */
*noise = -MWL_NODE_CONST(ni)->mn_ai.nf;
#else
*noise = -95; /* XXX */
#endif
#else
*noise = -95; /* XXX */
#endif
}
/*
* Convert Hardware per-antenna rssi info to common format:
* Let a1, a2, a3 represent the amplitudes per chain
* Let amax represent max[a1, a2, a3]
* Rssi1_dBm = RSSI_dBm + 20*log10(a1/amax)
* Rssi1_dBm = RSSI_dBm + 20*log10(a1) - 20*log10(amax)
* We store a table that is 4*20*log10(idx) - the extra 4 is to store or
* maintain some extra precision.
*
* Values are stored in .5 db format capped at 127.
*/
static void
mwl_node_getmimoinfo(const struct ieee80211_node *ni,
struct ieee80211_mimo_info *mi)
{
#define CVT(_dst, _src) do { \
(_dst) = rssi + ((logdbtbl[_src] - logdbtbl[rssi_max]) >> 2); \
(_dst) = (_dst) > 64 ? 127 : ((_dst) << 1); \
} while (0)
static const int8_t logdbtbl[32] = {
0, 0, 24, 38, 48, 56, 62, 68,
72, 76, 80, 83, 86, 89, 92, 94,
96, 98, 100, 102, 104, 106, 107, 109,
110, 112, 113, 115, 116, 117, 118, 119
};
const struct mwl_node *mn = MWL_NODE_CONST(ni);
uint8_t rssi = mn->mn_ai.rsvd1/2; /* XXX */
uint32_t rssi_max;
rssi_max = mn->mn_ai.rssi_a;
if (mn->mn_ai.rssi_b > rssi_max)
rssi_max = mn->mn_ai.rssi_b;
if (mn->mn_ai.rssi_c > rssi_max)
rssi_max = mn->mn_ai.rssi_c;
CVT(mi->ch[0].rssi[0], mn->mn_ai.rssi_a);
CVT(mi->ch[1].rssi[0], mn->mn_ai.rssi_b);
CVT(mi->ch[2].rssi[0], mn->mn_ai.rssi_c);
mi->ch[0].noise[0] = mn->mn_ai.nf_a;
mi->ch[1].noise[0] = mn->mn_ai.nf_b;
mi->ch[2].noise[0] = mn->mn_ai.nf_c;
#undef CVT
}
static __inline void *
mwl_getrxdma(struct mwl_softc *sc)
{
struct mwl_jumbo *buf;
void *data;
/*
* Allocate from jumbo pool.
*/
MWL_RXFREE_LOCK(sc);
buf = SLIST_FIRST(&sc->sc_rxfree);
if (buf == NULL) {
DPRINTF(sc, MWL_DEBUG_ANY,
"%s: out of rx dma buffers\n", __func__);
sc->sc_stats.mst_rx_nodmabuf++;
data = NULL;
} else {
SLIST_REMOVE_HEAD(&sc->sc_rxfree, next);
sc->sc_nrxfree--;
data = MWL_JUMBO_BUF2DATA(buf);
}
MWL_RXFREE_UNLOCK(sc);
return data;
}
static __inline void
mwl_putrxdma(struct mwl_softc *sc, void *data)
{
struct mwl_jumbo *buf;
/* XXX bounds check data */
MWL_RXFREE_LOCK(sc);
buf = MWL_JUMBO_DATA2BUF(data);
SLIST_INSERT_HEAD(&sc->sc_rxfree, buf, next);
sc->sc_nrxfree++;
MWL_RXFREE_UNLOCK(sc);
}
static int
mwl_rxbuf_init(struct mwl_softc *sc, struct mwl_rxbuf *bf)
{
struct mwl_rxdesc *ds;
ds = bf->bf_desc;
if (bf->bf_data == NULL) {
bf->bf_data = mwl_getrxdma(sc);
if (bf->bf_data == NULL) {
/* mark descriptor to be skipped */
ds->RxControl = EAGLE_RXD_CTRL_OS_OWN;
/* NB: don't need PREREAD */
MWL_RXDESC_SYNC(sc, ds, BUS_DMASYNC_PREWRITE);
sc->sc_stats.mst_rxbuf_failed++;
return ENOMEM;
}
}
/*
* NB: DMA buffer contents is known to be unmodified
* so there's no need to flush the data cache.
*/
/*
* Setup descriptor.
*/
ds->QosCtrl = 0;
ds->RSSI = 0;
ds->Status = EAGLE_RXD_STATUS_IDLE;
ds->Channel = 0;
ds->PktLen = htole16(MWL_AGGR_SIZE);
ds->SQ2 = 0;
ds->pPhysBuffData = htole32(MWL_JUMBO_DMA_ADDR(sc, bf->bf_data));
/* NB: don't touch pPhysNext, set once */
ds->RxControl = EAGLE_RXD_CTRL_DRIVER_OWN;
MWL_RXDESC_SYNC(sc, ds, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
return 0;
}
static void
mwl_ext_free(struct mbuf *m)
{
struct mwl_softc *sc = m->m_ext.ext_arg1;
/* XXX bounds check data */
mwl_putrxdma(sc, m->m_ext.ext_buf);
/*
* If we were previously blocked by a lack of rx dma buffers
* check if we now have enough to restart rx interrupt handling.
* NB: we know we are called at splvm which is above splnet.
*/
if (sc->sc_rxblocked && sc->sc_nrxfree > mwl_rxdmalow) {
sc->sc_rxblocked = 0;
mwl_hal_intrset(sc->sc_mh, sc->sc_imask);
}
}
struct mwl_frame_bar {
u_int8_t i_fc[2];
u_int8_t i_dur[2];
u_int8_t i_ra[IEEE80211_ADDR_LEN];
u_int8_t i_ta[IEEE80211_ADDR_LEN];
/* ctl, seq, FCS */
} __packed;
/*
* Like ieee80211_anyhdrsize, but handles BAR frames
* specially so the logic below to piece the 802.11
* header together works.
*/
static __inline int
mwl_anyhdrsize(const void *data)
{
const struct ieee80211_frame *wh = data;
if ((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) {
switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
case IEEE80211_FC0_SUBTYPE_CTS:
case IEEE80211_FC0_SUBTYPE_ACK:
return sizeof(struct ieee80211_frame_ack);
case IEEE80211_FC0_SUBTYPE_BAR:
return sizeof(struct mwl_frame_bar);
}
return sizeof(struct ieee80211_frame_min);
} else
return ieee80211_hdrsize(data);
}
static void
mwl_handlemicerror(struct ieee80211com *ic, const uint8_t *data)
{
const struct ieee80211_frame *wh;
struct ieee80211_node *ni;
wh = (const struct ieee80211_frame *)(data + sizeof(uint16_t));
ni = ieee80211_find_rxnode(ic, (const struct ieee80211_frame_min *) wh);
if (ni != NULL) {
ieee80211_notify_michael_failure(ni->ni_vap, wh, 0);
ieee80211_free_node(ni);
}
}
/*
* Convert hardware signal strength to rssi. The value
* provided by the device has the noise floor added in;
* we need to compensate for this but we don't have that
* so we use a fixed value.
*
* The offset of 8 is good for both 2.4 and 5GHz. The LNA
* offset is already set as part of the initial gain. This
* will give at least +/- 3dB for 2.4GHz and +/- 5dB for 5GHz.
*/
static __inline int
cvtrssi(uint8_t ssi)
{
int rssi = (int) ssi + 8;
/* XXX hack guess until we have a real noise floor */
rssi = 2*(87 - rssi); /* NB: .5 dBm units */
return (rssi < 0 ? 0 : rssi > 127 ? 127 : rssi);
}
static void
mwl_rx_proc(void *arg, int npending)
{
struct mwl_softc *sc = arg;
struct ieee80211com *ic = &sc->sc_ic;
struct mwl_rxbuf *bf;
struct mwl_rxdesc *ds;
struct mbuf *m;
struct ieee80211_qosframe *wh;
struct ieee80211_qosframe_addr4 *wh4;
struct ieee80211_node *ni;
struct mwl_node *mn;
int off, len, hdrlen, pktlen, rssi, ntodo;
uint8_t *data, status;
void *newdata;
int16_t nf;
DPRINTF(sc, MWL_DEBUG_RX_PROC, "%s: pending %u rdptr 0x%x wrptr 0x%x\n",
__func__, npending, RD4(sc, sc->sc_hwspecs.rxDescRead),
RD4(sc, sc->sc_hwspecs.rxDescWrite));
nf = -96; /* XXX */
bf = sc->sc_rxnext;
for (ntodo = mwl_rxquota; ntodo > 0; ntodo--) {
if (bf == NULL)
bf = STAILQ_FIRST(&sc->sc_rxbuf);
ds = bf->bf_desc;
data = bf->bf_data;
if (data == NULL) {
/*
* If data allocation failed previously there
* will be no buffer; try again to re-populate it.
* Note the firmware will not advance to the next
* descriptor with a dma buffer so we must mimic
* this or we'll get out of sync.
*/
DPRINTF(sc, MWL_DEBUG_ANY,
"%s: rx buf w/o dma memory\n", __func__);
(void) mwl_rxbuf_init(sc, bf);
sc->sc_stats.mst_rx_dmabufmissing++;
break;
}
MWL_RXDESC_SYNC(sc, ds,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
if (ds->RxControl != EAGLE_RXD_CTRL_DMA_OWN)
break;
#ifdef MWL_DEBUG
if (sc->sc_debug & MWL_DEBUG_RECV_DESC)
mwl_printrxbuf(bf, 0);
#endif
status = ds->Status;
if (status & EAGLE_RXD_STATUS_DECRYPT_ERR_MASK) {
counter_u64_add(ic->ic_ierrors, 1);
sc->sc_stats.mst_rx_crypto++;
/*
* NB: Check EAGLE_RXD_STATUS_GENERAL_DECRYPT_ERR
* for backwards compatibility.
*/
if (status != EAGLE_RXD_STATUS_GENERAL_DECRYPT_ERR &&
(status & EAGLE_RXD_STATUS_TKIP_MIC_DECRYPT_ERR)) {
/*
* MIC error, notify upper layers.
*/
bus_dmamap_sync(sc->sc_rxdmat, sc->sc_rxmap,
BUS_DMASYNC_POSTREAD);
mwl_handlemicerror(ic, data);
sc->sc_stats.mst_rx_tkipmic++;
}
/* XXX too painful to tap packets */
goto rx_next;
}
/*
* Sync the data buffer.
*/
len = le16toh(ds->PktLen);
bus_dmamap_sync(sc->sc_rxdmat, sc->sc_rxmap, BUS_DMASYNC_POSTREAD);
/*
* The 802.11 header is provided all or in part at the front;
* use it to calculate the true size of the header that we'll
* construct below. We use this to figure out where to copy
* payload prior to constructing the header.
*/
hdrlen = mwl_anyhdrsize(data + sizeof(uint16_t));
off = sizeof(uint16_t) + sizeof(struct ieee80211_frame_addr4);
/* calculate rssi early so we can re-use for each aggregate */
rssi = cvtrssi(ds->RSSI);
pktlen = hdrlen + (len - off);
/*
* NB: we know our frame is at least as large as
* IEEE80211_MIN_LEN because there is a 4-address
* frame at the front. Hence there's no need to
* vet the packet length. If the frame in fact
* is too small it should be discarded at the
* net80211 layer.
*/
/*
* Attach dma buffer to an mbuf. We tried
* doing this based on the packet size (i.e.
* copying small packets) but it turns out to
* be a net loss. The tradeoff might be system
* dependent (cache architecture is important).
*/
MGETHDR(m, M_NOWAIT, MT_DATA);
if (m == NULL) {
DPRINTF(sc, MWL_DEBUG_ANY,
"%s: no rx mbuf\n", __func__);
sc->sc_stats.mst_rx_nombuf++;
goto rx_next;
}
/*
* Acquire the replacement dma buffer before
* processing the frame. If we're out of dma
* buffers we disable rx interrupts and wait
* for the free pool to reach mlw_rxdmalow buffers
* before starting to do work again. If the firmware
* runs out of descriptors then it will toss frames
* which is better than our doing it as that can
* starve our processing. It is also important that
* we always process rx'd frames in case they are
* A-MPDU as otherwise the host's view of the BA
* window may get out of sync with the firmware.
*/
newdata = mwl_getrxdma(sc);
if (newdata == NULL) {
/* NB: stat+msg in mwl_getrxdma */
m_free(m);
/* disable RX interrupt and mark state */
mwl_hal_intrset(sc->sc_mh,
sc->sc_imask &~ MACREG_A2HRIC_BIT_RX_RDY);
sc->sc_rxblocked = 1;
ieee80211_drain(ic);
/* XXX check rxblocked and immediately start again? */
goto rx_stop;
}
bf->bf_data = newdata;
/*
* Attach the dma buffer to the mbuf;
* mwl_rxbuf_init will re-setup the rx
* descriptor using the replacement dma
* buffer we just installed above.
*/
m_extadd(m, data, MWL_AGGR_SIZE, mwl_ext_free, sc, NULL, 0,
EXT_NET_DRV);
m->m_data += off - hdrlen;
m->m_pkthdr.len = m->m_len = pktlen;
/* NB: dma buffer assumed read-only */
/*
* Piece 802.11 header together.
*/
wh = mtod(m, struct ieee80211_qosframe *);
/* NB: don't need to do this sometimes but ... */
/* XXX special case so we can memcpy after m_devget? */
ovbcopy(data + sizeof(uint16_t), wh, hdrlen);
if (IEEE80211_QOS_HAS_SEQ(wh)) {
if (IEEE80211_IS_DSTODS(wh)) {
wh4 = mtod(m,
struct ieee80211_qosframe_addr4*);
*(uint16_t *)wh4->i_qos = ds->QosCtrl;
} else {
*(uint16_t *)wh->i_qos = ds->QosCtrl;
}
}
/*
* The f/w strips WEP header but doesn't clear
* the WEP bit; mark the packet with M_WEP so
* net80211 will treat the data as decrypted.
* While here also clear the PWR_MGT bit since
* power save is handled by the firmware and
* passing this up will potentially cause the
* upper layer to put a station in power save
* (except when configured with MWL_HOST_PS_SUPPORT).
*/
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED)
m->m_flags |= M_WEP;
#ifdef MWL_HOST_PS_SUPPORT
wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
#else
wh->i_fc[1] &= ~(IEEE80211_FC1_PROTECTED |
IEEE80211_FC1_PWR_MGT);
#endif
if (ieee80211_radiotap_active(ic)) {
struct mwl_rx_radiotap_header *tap = &sc->sc_rx_th;
tap->wr_flags = 0;
tap->wr_rate = ds->Rate;
tap->wr_antsignal = rssi + nf;
tap->wr_antnoise = nf;
}
if (IFF_DUMPPKTS_RECV(sc, wh)) {
ieee80211_dump_pkt(ic, mtod(m, caddr_t),
len, ds->Rate, rssi);
}
/* dispatch */
ni = ieee80211_find_rxnode(ic,
(const struct ieee80211_frame_min *) wh);
if (ni != NULL) {
mn = MWL_NODE(ni);
#ifdef MWL_ANT_INFO_SUPPORT
mn->mn_ai.rssi_a = ds->ai.rssi_a;
mn->mn_ai.rssi_b = ds->ai.rssi_b;
mn->mn_ai.rssi_c = ds->ai.rssi_c;
mn->mn_ai.rsvd1 = rssi;
#endif
/* tag AMPDU aggregates for reorder processing */
if (ni->ni_flags & IEEE80211_NODE_HT)
m->m_flags |= M_AMPDU;
(void) ieee80211_input(ni, m, rssi, nf);
ieee80211_free_node(ni);
} else
(void) ieee80211_input_all(ic, m, rssi, nf);
rx_next:
/* NB: ignore ENOMEM so we process more descriptors */
(void) mwl_rxbuf_init(sc, bf);
bf = STAILQ_NEXT(bf, bf_list);
}
rx_stop:
sc->sc_rxnext = bf;
if (mbufq_first(&sc->sc_snd) != NULL) {
/* NB: kick fw; the tx thread may have been preempted */
mwl_hal_txstart(sc->sc_mh, 0);
mwl_start(sc);
}
}
static void
mwl_txq_init(struct mwl_softc *sc, struct mwl_txq *txq, int qnum)
{
struct mwl_txbuf *bf, *bn;
struct mwl_txdesc *ds;
MWL_TXQ_LOCK_INIT(sc, txq);
txq->qnum = qnum;
txq->txpri = 0; /* XXX */
#if 0
/* NB: q setup by mwl_txdma_setup XXX */
STAILQ_INIT(&txq->free);
#endif
STAILQ_FOREACH(bf, &txq->free, bf_list) {
bf->bf_txq = txq;
ds = bf->bf_desc;
bn = STAILQ_NEXT(bf, bf_list);
if (bn == NULL)
bn = STAILQ_FIRST(&txq->free);
ds->pPhysNext = htole32(bn->bf_daddr);
}
STAILQ_INIT(&txq->active);
}
/*
* Setup a hardware data transmit queue for the specified
* access control. We record the mapping from ac's
* to h/w queues for use by mwl_tx_start.
*/
static int
mwl_tx_setup(struct mwl_softc *sc, int ac, int mvtype)
{
struct mwl_txq *txq;
if (ac >= nitems(sc->sc_ac2q)) {
device_printf(sc->sc_dev, "AC %u out of range, max %zu!\n",
ac, nitems(sc->sc_ac2q));
return 0;
}
if (mvtype >= MWL_NUM_TX_QUEUES) {
device_printf(sc->sc_dev, "mvtype %u out of range, max %u!\n",
mvtype, MWL_NUM_TX_QUEUES);
return 0;
}
txq = &sc->sc_txq[mvtype];
mwl_txq_init(sc, txq, mvtype);
sc->sc_ac2q[ac] = txq;
return 1;
}
/*
* Update WME parameters for a transmit queue.
*/
static int
mwl_txq_update(struct mwl_softc *sc, int ac)
{
#define MWL_EXPONENT_TO_VALUE(v) ((1<<v)-1)
struct ieee80211com *ic = &sc->sc_ic;
struct mwl_txq *txq = sc->sc_ac2q[ac];
struct wmeParams *wmep = &ic->ic_wme.wme_chanParams.cap_wmeParams[ac];
struct mwl_hal *mh = sc->sc_mh;
int aifs, cwmin, cwmax, txoplim;
aifs = wmep->wmep_aifsn;
/* XXX in sta mode need to pass log values for cwmin/max */
cwmin = MWL_EXPONENT_TO_VALUE(wmep->wmep_logcwmin);
cwmax = MWL_EXPONENT_TO_VALUE(wmep->wmep_logcwmax);
txoplim = wmep->wmep_txopLimit; /* NB: units of 32us */
if (mwl_hal_setedcaparams(mh, txq->qnum, cwmin, cwmax, aifs, txoplim)) {
device_printf(sc->sc_dev, "unable to update hardware queue "
"parameters for %s traffic!\n",
ieee80211_wme_acnames[ac]);
return 0;
}
return 1;
#undef MWL_EXPONENT_TO_VALUE
}
/*
* Callback from the 802.11 layer to update WME parameters.
*/
static int
mwl_wme_update(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
return !mwl_txq_update(sc, WME_AC_BE) ||
!mwl_txq_update(sc, WME_AC_BK) ||
!mwl_txq_update(sc, WME_AC_VI) ||
!mwl_txq_update(sc, WME_AC_VO) ? EIO : 0;
}
/*
* Reclaim resources for a setup queue.
*/
static void
mwl_tx_cleanupq(struct mwl_softc *sc, struct mwl_txq *txq)
{
/* XXX hal work? */
MWL_TXQ_LOCK_DESTROY(txq);
}
/*
* Reclaim all tx queue resources.
*/
static void
mwl_tx_cleanup(struct mwl_softc *sc)
{
int i;
for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
mwl_tx_cleanupq(sc, &sc->sc_txq[i]);
}
static int
mwl_tx_dmasetup(struct mwl_softc *sc, struct mwl_txbuf *bf, struct mbuf *m0)
{
struct mbuf *m;
int error;
/*
* Load the DMA map so any coalescing is done. This
* also calculates the number of descriptors we need.
*/
error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0,
bf->bf_segs, &bf->bf_nseg,
BUS_DMA_NOWAIT);
if (error == EFBIG) {
/* XXX packet requires too many descriptors */
bf->bf_nseg = MWL_TXDESC+1;
} else if (error != 0) {
sc->sc_stats.mst_tx_busdma++;
m_freem(m0);
return error;
}
/*
* Discard null packets and check for packets that
* require too many TX descriptors. We try to convert
* the latter to a cluster.
*/
if (error == EFBIG) { /* too many desc's, linearize */
sc->sc_stats.mst_tx_linear++;
#if MWL_TXDESC > 1
m = m_collapse(m0, M_NOWAIT, MWL_TXDESC);
#else
m = m_defrag(m0, M_NOWAIT);
#endif
if (m == NULL) {
m_freem(m0);
sc->sc_stats.mst_tx_nombuf++;
return ENOMEM;
}
m0 = m;
error = bus_dmamap_load_mbuf_sg(sc->sc_dmat, bf->bf_dmamap, m0,
bf->bf_segs, &bf->bf_nseg,
BUS_DMA_NOWAIT);
if (error != 0) {
sc->sc_stats.mst_tx_busdma++;
m_freem(m0);
return error;
}
KASSERT(bf->bf_nseg <= MWL_TXDESC,
("too many segments after defrag; nseg %u", bf->bf_nseg));
} else if (bf->bf_nseg == 0) { /* null packet, discard */
sc->sc_stats.mst_tx_nodata++;
m_freem(m0);
return EIO;
}
DPRINTF(sc, MWL_DEBUG_XMIT, "%s: m %p len %u\n",
__func__, m0, m0->m_pkthdr.len);
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap, BUS_DMASYNC_PREWRITE);
bf->bf_m = m0;
return 0;
}
static __inline int
mwl_cvtlegacyrate(int rate)
{
switch (rate) {
case 2: return 0;
case 4: return 1;
case 11: return 2;
case 22: return 3;
case 44: return 4;
case 12: return 5;
case 18: return 6;
case 24: return 7;
case 36: return 8;
case 48: return 9;
case 72: return 10;
case 96: return 11;
case 108:return 12;
}
return 0;
}
/*
* Calculate fixed tx rate information per client state;
* this value is suitable for writing to the Format field
* of a tx descriptor.
*/
static uint16_t
mwl_calcformat(uint8_t rate, const struct ieee80211_node *ni)
{
uint16_t fmt;
fmt = SM(3, EAGLE_TXD_ANTENNA)
| (IEEE80211_IS_CHAN_HT40D(ni->ni_chan) ?
EAGLE_TXD_EXTCHAN_LO : EAGLE_TXD_EXTCHAN_HI);
if (rate & IEEE80211_RATE_MCS) { /* HT MCS */
fmt |= EAGLE_TXD_FORMAT_HT
/* NB: 0x80 implicitly stripped from ucastrate */
| SM(rate, EAGLE_TXD_RATE);
/* XXX short/long GI may be wrong; re-check */
if (IEEE80211_IS_CHAN_HT40(ni->ni_chan)) {
fmt |= EAGLE_TXD_CHW_40
| (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI40 ?
EAGLE_TXD_GI_SHORT : EAGLE_TXD_GI_LONG);
} else {
fmt |= EAGLE_TXD_CHW_20
| (ni->ni_htcap & IEEE80211_HTCAP_SHORTGI20 ?
EAGLE_TXD_GI_SHORT : EAGLE_TXD_GI_LONG);
}
} else { /* legacy rate */
fmt |= EAGLE_TXD_FORMAT_LEGACY
| SM(mwl_cvtlegacyrate(rate), EAGLE_TXD_RATE)
| EAGLE_TXD_CHW_20
/* XXX iv_flags & IEEE80211_F_SHPREAMBLE? */
| (ni->ni_capinfo & IEEE80211_CAPINFO_SHORT_PREAMBLE ?
EAGLE_TXD_PREAMBLE_SHORT : EAGLE_TXD_PREAMBLE_LONG);
}
return fmt;
}
static int
mwl_tx_start(struct mwl_softc *sc, struct ieee80211_node *ni, struct mwl_txbuf *bf,
struct mbuf *m0)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211vap *vap = ni->ni_vap;
int error, iswep, ismcast;
int hdrlen, copyhdrlen, pktlen;
struct mwl_txdesc *ds;
struct mwl_txq *txq;
struct ieee80211_frame *wh;
struct mwltxrec *tr;
struct mwl_node *mn;
uint16_t qos;
#if MWL_TXDESC > 1
int i;
#endif
wh = mtod(m0, struct ieee80211_frame *);
iswep = wh->i_fc[1] & IEEE80211_FC1_PROTECTED;
ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1);
hdrlen = ieee80211_anyhdrsize(wh);
copyhdrlen = hdrlen;
pktlen = m0->m_pkthdr.len;
if (IEEE80211_QOS_HAS_SEQ(wh)) {
if (IEEE80211_IS_DSTODS(wh)) {
qos = *(uint16_t *)
(((struct ieee80211_qosframe_addr4 *) wh)->i_qos);
copyhdrlen -= sizeof(qos);
} else
qos = *(uint16_t *)
(((struct ieee80211_qosframe *) wh)->i_qos);
} else
qos = 0;
if (iswep) {
const struct ieee80211_cipher *cip;
struct ieee80211_key *k;
/*
* Construct the 802.11 header+trailer for an encrypted
* frame. The only reason this can fail is because of an
* unknown or unsupported cipher/key type.
*
* NB: we do this even though the firmware will ignore
* what we've done for WEP and TKIP as we need the
* ExtIV filled in for CCMP and this also adjusts
* the headers which simplifies our work below.
*/
k = ieee80211_crypto_encap(ni, m0);
if (k == NULL) {
/*
* This can happen when the key is yanked after the
* frame was queued. Just discard the frame; the
* 802.11 layer counts failures and provides
* debugging/diagnostics.
*/
m_freem(m0);
return EIO;
}
/*
* Adjust the packet length for the crypto additions
* done during encap and any other bits that the f/w
* will add later on.
*/
cip = k->wk_cipher;
pktlen += cip->ic_header + cip->ic_miclen + cip->ic_trailer;
/* packet header may have moved, reset our local pointer */
wh = mtod(m0, struct ieee80211_frame *);
}
if (ieee80211_radiotap_active_vap(vap)) {
sc->sc_tx_th.wt_flags = 0; /* XXX */
if (iswep)
sc->sc_tx_th.wt_flags |= IEEE80211_RADIOTAP_F_WEP;
#if 0
sc->sc_tx_th.wt_rate = ds->DataRate;
#endif
sc->sc_tx_th.wt_txpower = ni->ni_txpower;
sc->sc_tx_th.wt_antenna = sc->sc_txantenna;
ieee80211_radiotap_tx(vap, m0);
}
/*
* Copy up/down the 802.11 header; the firmware requires
* we present a 2-byte payload length followed by a
* 4-address header (w/o QoS), followed (optionally) by
* any WEP/ExtIV header (but only filled in for CCMP).
* We are assured the mbuf has sufficient headroom to
* prepend in-place by the setup of ic_headroom in
* mwl_attach.
*/
if (hdrlen < sizeof(struct mwltxrec)) {
const int space = sizeof(struct mwltxrec) - hdrlen;
if (M_LEADINGSPACE(m0) < space) {
/* NB: should never happen */
device_printf(sc->sc_dev,
"not enough headroom, need %d found %zd, "
"m_flags 0x%x m_len %d\n",
space, M_LEADINGSPACE(m0), m0->m_flags, m0->m_len);
ieee80211_dump_pkt(ic,
mtod(m0, const uint8_t *), m0->m_len, 0, -1);
m_freem(m0);
sc->sc_stats.mst_tx_noheadroom++;
return EIO;
}
M_PREPEND(m0, space, M_NOWAIT);
}
tr = mtod(m0, struct mwltxrec *);
if (wh != (struct ieee80211_frame *) &tr->wh)
ovbcopy(wh, &tr->wh, hdrlen);
/*
* Note: the "firmware length" is actually the length
* of the fully formed "802.11 payload". That is, it's
* everything except for the 802.11 header. In particular
* this includes all crypto material including the MIC!
*/
tr->fwlen = htole16(pktlen - hdrlen);
/*
* Load the DMA map so any coalescing is done. This
* also calculates the number of descriptors we need.
*/
error = mwl_tx_dmasetup(sc, bf, m0);
if (error != 0) {
/* NB: stat collected in mwl_tx_dmasetup */
DPRINTF(sc, MWL_DEBUG_XMIT,
"%s: unable to setup dma\n", __func__);
return error;
}
bf->bf_node = ni; /* NB: held reference */
m0 = bf->bf_m; /* NB: may have changed */
tr = mtod(m0, struct mwltxrec *);
wh = (struct ieee80211_frame *)&tr->wh;
/*
* Formulate tx descriptor.
*/
ds = bf->bf_desc;
txq = bf->bf_txq;
ds->QosCtrl = qos; /* NB: already little-endian */
#if MWL_TXDESC == 1
/*
* NB: multiframes should be zero because the descriptors
* are initialized to zero. This should handle the case
* where the driver is built with MWL_TXDESC=1 but we are
* using firmware with multi-segment support.
*/
ds->PktPtr = htole32(bf->bf_segs[0].ds_addr);
ds->PktLen = htole16(bf->bf_segs[0].ds_len);
#else
ds->multiframes = htole32(bf->bf_nseg);
ds->PktLen = htole16(m0->m_pkthdr.len);
for (i = 0; i < bf->bf_nseg; i++) {
ds->PktPtrArray[i] = htole32(bf->bf_segs[i].ds_addr);
ds->PktLenArray[i] = htole16(bf->bf_segs[i].ds_len);
}
#endif
/* NB: pPhysNext, DataRate, and SapPktInfo setup once, don't touch */
ds->Format = 0;
ds->pad = 0;
ds->ack_wcb_addr = 0;
mn = MWL_NODE(ni);
/*
* Select transmit rate.
*/
switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) {
case IEEE80211_FC0_TYPE_MGT:
sc->sc_stats.mst_tx_mgmt++;
/* fall thru... */
case IEEE80211_FC0_TYPE_CTL:
/* NB: assign to BE q to avoid bursting */
ds->TxPriority = MWL_WME_AC_BE;
break;
case IEEE80211_FC0_TYPE_DATA:
if (!ismcast) {
const struct ieee80211_txparam *tp = ni->ni_txparms;
/*
* EAPOL frames get forced to a fixed rate and w/o
* aggregation; otherwise check for any fixed rate
* for the client (may depend on association state).
*/
if (m0->m_flags & M_EAPOL) {
const struct mwl_vap *mvp = MWL_VAP_CONST(vap);
ds->Format = mvp->mv_eapolformat;
ds->pad = htole16(
EAGLE_TXD_FIXED_RATE | EAGLE_TXD_DONT_AGGR);
} else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
/* XXX pre-calculate per node */
ds->Format = htole16(
mwl_calcformat(tp->ucastrate, ni));
ds->pad = htole16(EAGLE_TXD_FIXED_RATE);
}
/* NB: EAPOL frames will never have qos set */
if (qos == 0)
ds->TxPriority = txq->qnum;
#if MWL_MAXBA > 3
else if (mwl_bastream_match(&mn->mn_ba[3], qos))
ds->TxPriority = mn->mn_ba[3].txq;
#endif
#if MWL_MAXBA > 2
else if (mwl_bastream_match(&mn->mn_ba[2], qos))
ds->TxPriority = mn->mn_ba[2].txq;
#endif
#if MWL_MAXBA > 1
else if (mwl_bastream_match(&mn->mn_ba[1], qos))
ds->TxPriority = mn->mn_ba[1].txq;
#endif
#if MWL_MAXBA > 0
else if (mwl_bastream_match(&mn->mn_ba[0], qos))
ds->TxPriority = mn->mn_ba[0].txq;
#endif
else
ds->TxPriority = txq->qnum;
} else
ds->TxPriority = txq->qnum;
break;
default:
device_printf(sc->sc_dev, "bogus frame type 0x%x (%s)\n",
wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK, __func__);
sc->sc_stats.mst_tx_badframetype++;
m_freem(m0);
return EIO;
}
if (IFF_DUMPPKTS_XMIT(sc))
ieee80211_dump_pkt(ic,
mtod(m0, const uint8_t *)+sizeof(uint16_t),
m0->m_len - sizeof(uint16_t), ds->DataRate, -1);
MWL_TXQ_LOCK(txq);
ds->Status = htole32(EAGLE_TXD_STATUS_FW_OWNED);
STAILQ_INSERT_TAIL(&txq->active, bf, bf_list);
MWL_TXDESC_SYNC(txq, ds, BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
sc->sc_tx_timer = 5;
MWL_TXQ_UNLOCK(txq);
return 0;
}
static __inline int
mwl_cvtlegacyrix(int rix)
{
static const int ieeerates[] =
{ 2, 4, 11, 22, 44, 12, 18, 24, 36, 48, 72, 96, 108 };
return (rix < nitems(ieeerates) ? ieeerates[rix] : 0);
}
/*
* Process completed xmit descriptors from the specified queue.
*/
static int
mwl_tx_processq(struct mwl_softc *sc, struct mwl_txq *txq)
{
#define EAGLE_TXD_STATUS_MCAST \
(EAGLE_TXD_STATUS_MULTICAST_TX | EAGLE_TXD_STATUS_BROADCAST_TX)
struct ieee80211com *ic = &sc->sc_ic;
struct mwl_txbuf *bf;
struct mwl_txdesc *ds;
struct ieee80211_node *ni;
struct mwl_node *an;
int nreaped;
uint32_t status;
DPRINTF(sc, MWL_DEBUG_TX_PROC, "%s: tx queue %u\n", __func__, txq->qnum);
for (nreaped = 0;; nreaped++) {
MWL_TXQ_LOCK(txq);
bf = STAILQ_FIRST(&txq->active);
if (bf == NULL) {
MWL_TXQ_UNLOCK(txq);
break;
}
ds = bf->bf_desc;
MWL_TXDESC_SYNC(txq, ds,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
if (ds->Status & htole32(EAGLE_TXD_STATUS_FW_OWNED)) {
MWL_TXQ_UNLOCK(txq);
break;
}
STAILQ_REMOVE_HEAD(&txq->active, bf_list);
MWL_TXQ_UNLOCK(txq);
#ifdef MWL_DEBUG
if (sc->sc_debug & MWL_DEBUG_XMIT_DESC)
mwl_printtxbuf(bf, txq->qnum, nreaped);
#endif
ni = bf->bf_node;
if (ni != NULL) {
an = MWL_NODE(ni);
status = le32toh(ds->Status);
if (status & EAGLE_TXD_STATUS_OK) {
uint16_t Format = le16toh(ds->Format);
uint8_t txant = MS(Format, EAGLE_TXD_ANTENNA);
sc->sc_stats.mst_ant_tx[txant]++;
if (status & EAGLE_TXD_STATUS_OK_RETRY)
sc->sc_stats.mst_tx_retries++;
if (status & EAGLE_TXD_STATUS_OK_MORE_RETRY)
sc->sc_stats.mst_tx_mretries++;
if (txq->qnum >= MWL_WME_AC_VO)
ic->ic_wme.wme_hipri_traffic++;
ni->ni_txrate = MS(Format, EAGLE_TXD_RATE);
if ((Format & EAGLE_TXD_FORMAT_HT) == 0) {
ni->ni_txrate = mwl_cvtlegacyrix(
ni->ni_txrate);
} else
ni->ni_txrate |= IEEE80211_RATE_MCS;
sc->sc_stats.mst_tx_rate = ni->ni_txrate;
} else {
if (status & EAGLE_TXD_STATUS_FAILED_LINK_ERROR)
sc->sc_stats.mst_tx_linkerror++;
if (status & EAGLE_TXD_STATUS_FAILED_XRETRY)
sc->sc_stats.mst_tx_xretries++;
if (status & EAGLE_TXD_STATUS_FAILED_AGING)
sc->sc_stats.mst_tx_aging++;
if (bf->bf_m->m_flags & M_FF)
sc->sc_stats.mst_ff_txerr++;
}
if (bf->bf_m->m_flags & M_TXCB)
/* XXX strip fw len in case header inspected */
m_adj(bf->bf_m, sizeof(uint16_t));
ieee80211_tx_complete(ni, bf->bf_m,
(status & EAGLE_TXD_STATUS_OK) == 0);
} else
m_freem(bf->bf_m);
ds->Status = htole32(EAGLE_TXD_STATUS_IDLE);
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
mwl_puttxbuf_tail(txq, bf);
}
return nreaped;
#undef EAGLE_TXD_STATUS_MCAST
}
/*
* Deferred processing of transmit interrupt; special-cased
* for four hardware queues, 0-3.
*/
static void
mwl_tx_proc(void *arg, int npending)
{
struct mwl_softc *sc = arg;
int nreaped;
/*
* Process each active queue.
*/
nreaped = 0;
if (!STAILQ_EMPTY(&sc->sc_txq[0].active))
nreaped += mwl_tx_processq(sc, &sc->sc_txq[0]);
if (!STAILQ_EMPTY(&sc->sc_txq[1].active))
nreaped += mwl_tx_processq(sc, &sc->sc_txq[1]);
if (!STAILQ_EMPTY(&sc->sc_txq[2].active))
nreaped += mwl_tx_processq(sc, &sc->sc_txq[2]);
if (!STAILQ_EMPTY(&sc->sc_txq[3].active))
nreaped += mwl_tx_processq(sc, &sc->sc_txq[3]);
if (nreaped != 0) {
sc->sc_tx_timer = 0;
if (mbufq_first(&sc->sc_snd) != NULL) {
/* NB: kick fw; the tx thread may have been preempted */
mwl_hal_txstart(sc->sc_mh, 0);
mwl_start(sc);
}
}
}
static void
mwl_tx_draintxq(struct mwl_softc *sc, struct mwl_txq *txq)
{
struct ieee80211_node *ni;
struct mwl_txbuf *bf;
u_int ix;
/*
* NB: this assumes output has been stopped and
* we do not need to block mwl_tx_tasklet
*/
for (ix = 0;; ix++) {
MWL_TXQ_LOCK(txq);
bf = STAILQ_FIRST(&txq->active);
if (bf == NULL) {
MWL_TXQ_UNLOCK(txq);
break;
}
STAILQ_REMOVE_HEAD(&txq->active, bf_list);
MWL_TXQ_UNLOCK(txq);
#ifdef MWL_DEBUG
if (sc->sc_debug & MWL_DEBUG_RESET) {
struct ieee80211com *ic = &sc->sc_ic;
const struct mwltxrec *tr =
mtod(bf->bf_m, const struct mwltxrec *);
mwl_printtxbuf(bf, txq->qnum, ix);
ieee80211_dump_pkt(ic, (const uint8_t *)&tr->wh,
bf->bf_m->m_len - sizeof(tr->fwlen), 0, -1);
}
#endif /* MWL_DEBUG */
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
ni = bf->bf_node;
if (ni != NULL) {
/*
* Reclaim node reference.
*/
ieee80211_free_node(ni);
}
m_freem(bf->bf_m);
mwl_puttxbuf_tail(txq, bf);
}
}
/*
* Drain the transmit queues and reclaim resources.
*/
static void
mwl_draintxq(struct mwl_softc *sc)
{
int i;
for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
mwl_tx_draintxq(sc, &sc->sc_txq[i]);
sc->sc_tx_timer = 0;
}
#ifdef MWL_DIAGAPI
/*
* Reset the transmit queues to a pristine state after a fw download.
*/
static void
mwl_resettxq(struct mwl_softc *sc)
{
int i;
for (i = 0; i < MWL_NUM_TX_QUEUES; i++)
mwl_txq_reset(sc, &sc->sc_txq[i]);
}
#endif /* MWL_DIAGAPI */
/*
* Clear the transmit queues of any frames submitted for the
* specified vap. This is done when the vap is deleted so we
* don't potentially reference the vap after it is gone.
* Note we cannot remove the frames; we only reclaim the node
* reference.
*/
static void
mwl_cleartxq(struct mwl_softc *sc, struct ieee80211vap *vap)
{
struct mwl_txq *txq;
struct mwl_txbuf *bf;
int i;
for (i = 0; i < MWL_NUM_TX_QUEUES; i++) {
txq = &sc->sc_txq[i];
MWL_TXQ_LOCK(txq);
STAILQ_FOREACH(bf, &txq->active, bf_list) {
struct ieee80211_node *ni = bf->bf_node;
if (ni != NULL && ni->ni_vap == vap) {
bf->bf_node = NULL;
ieee80211_free_node(ni);
}
}
MWL_TXQ_UNLOCK(txq);
}
}
static int
mwl_recv_action(struct ieee80211_node *ni, const struct ieee80211_frame *wh,
const uint8_t *frm, const uint8_t *efrm)
{
struct mwl_softc *sc = ni->ni_ic->ic_softc;
const struct ieee80211_action *ia;
ia = (const struct ieee80211_action *) frm;
if (ia->ia_category == IEEE80211_ACTION_CAT_HT &&
ia->ia_action == IEEE80211_ACTION_HT_MIMOPWRSAVE) {
const struct ieee80211_action_ht_mimopowersave *mps =
(const struct ieee80211_action_ht_mimopowersave *) ia;
mwl_hal_setmimops(sc->sc_mh, ni->ni_macaddr,
mps->am_control & IEEE80211_A_HT_MIMOPWRSAVE_ENA,
MS(mps->am_control, IEEE80211_A_HT_MIMOPWRSAVE_MODE));
return 0;
} else
return sc->sc_recv_action(ni, wh, frm, efrm);
}
static int
mwl_addba_request(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap,
int dialogtoken, int baparamset, int batimeout)
{
struct mwl_softc *sc = ni->ni_ic->ic_softc;
struct ieee80211vap *vap = ni->ni_vap;
struct mwl_node *mn = MWL_NODE(ni);
struct mwl_bastate *bas;
bas = tap->txa_private;
if (bas == NULL) {
const MWL_HAL_BASTREAM *sp;
/*
* Check for a free BA stream slot.
*/
#if MWL_MAXBA > 3
if (mn->mn_ba[3].bastream == NULL)
bas = &mn->mn_ba[3];
else
#endif
#if MWL_MAXBA > 2
if (mn->mn_ba[2].bastream == NULL)
bas = &mn->mn_ba[2];
else
#endif
#if MWL_MAXBA > 1
if (mn->mn_ba[1].bastream == NULL)
bas = &mn->mn_ba[1];
else
#endif
#if MWL_MAXBA > 0
if (mn->mn_ba[0].bastream == NULL)
bas = &mn->mn_ba[0];
else
#endif
{
/* sta already has max BA streams */
/* XXX assign BA stream to highest priority tid */
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: already has max bastreams\n", __func__);
sc->sc_stats.mst_ampdu_reject++;
return 0;
}
/* NB: no held reference to ni */
sp = mwl_hal_bastream_alloc(MWL_VAP(vap)->mv_hvap,
(baparamset & IEEE80211_BAPS_POLICY_IMMEDIATE) != 0,
ni->ni_macaddr, tap->txa_tid, ni->ni_htparam,
ni, tap);
if (sp == NULL) {
/*
* No available stream, return 0 so no
* a-mpdu aggregation will be done.
*/
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: no bastream available\n", __func__);
sc->sc_stats.mst_ampdu_nostream++;
return 0;
}
DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: alloc bastream %p\n",
__func__, sp);
/* NB: qos is left zero so we won't match in mwl_tx_start */
bas->bastream = sp;
tap->txa_private = bas;
}
/* fetch current seq# from the firmware; if available */
if (mwl_hal_bastream_get_seqno(sc->sc_mh, bas->bastream,
vap->iv_opmode == IEEE80211_M_STA ? vap->iv_myaddr : ni->ni_macaddr,
&tap->txa_start) != 0)
tap->txa_start = 0;
return sc->sc_addba_request(ni, tap, dialogtoken, baparamset, batimeout);
}
static int
mwl_addba_response(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap,
int code, int baparamset, int batimeout)
{
struct mwl_softc *sc = ni->ni_ic->ic_softc;
struct mwl_bastate *bas;
bas = tap->txa_private;
if (bas == NULL) {
/* XXX should not happen */
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: no BA stream allocated, TID %d\n",
__func__, tap->txa_tid);
sc->sc_stats.mst_addba_nostream++;
return 0;
}
if (code == IEEE80211_STATUS_SUCCESS) {
struct ieee80211vap *vap = ni->ni_vap;
int bufsiz, error;
/*
* Tell the firmware to setup the BA stream;
* we know resources are available because we
* pre-allocated one before forming the request.
*/
bufsiz = MS(baparamset, IEEE80211_BAPS_BUFSIZ);
if (bufsiz == 0)
bufsiz = IEEE80211_AGGR_BAWMAX;
error = mwl_hal_bastream_create(MWL_VAP(vap)->mv_hvap,
bas->bastream, bufsiz, bufsiz, tap->txa_start);
if (error != 0) {
/*
* Setup failed, return immediately so no a-mpdu
* aggregation will be done.
*/
mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream);
mwl_bastream_free(bas);
tap->txa_private = NULL;
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: create failed, error %d, bufsiz %d TID %d "
"htparam 0x%x\n", __func__, error, bufsiz,
tap->txa_tid, ni->ni_htparam);
sc->sc_stats.mst_bacreate_failed++;
return 0;
}
/* NB: cache txq to avoid ptr indirect */
mwl_bastream_setup(bas, tap->txa_tid, bas->bastream->txq);
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: bastream %p assigned to txq %d TID %d bufsiz %d "
"htparam 0x%x\n", __func__, bas->bastream,
bas->txq, tap->txa_tid, bufsiz, ni->ni_htparam);
} else {
/*
* Other side NAK'd us; return the resources.
*/
DPRINTF(sc, MWL_DEBUG_AMPDU,
"%s: request failed with code %d, destroy bastream %p\n",
__func__, code, bas->bastream);
mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream);
mwl_bastream_free(bas);
tap->txa_private = NULL;
}
/* NB: firmware sends BAR so we don't need to */
return sc->sc_addba_response(ni, tap, code, baparamset, batimeout);
}
static void
mwl_addba_stop(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap)
{
struct mwl_softc *sc = ni->ni_ic->ic_softc;
struct mwl_bastate *bas;
bas = tap->txa_private;
if (bas != NULL) {
DPRINTF(sc, MWL_DEBUG_AMPDU, "%s: destroy bastream %p\n",
__func__, bas->bastream);
mwl_hal_bastream_destroy(sc->sc_mh, bas->bastream);
mwl_bastream_free(bas);
tap->txa_private = NULL;
}
sc->sc_addba_stop(ni, tap);
}
/*
* Setup the rx data structures. This should only be
* done once or we may get out of sync with the firmware.
*/
static int
mwl_startrecv(struct mwl_softc *sc)
{
if (!sc->sc_recvsetup) {
struct mwl_rxbuf *bf, *prev;
struct mwl_rxdesc *ds;
prev = NULL;
STAILQ_FOREACH(bf, &sc->sc_rxbuf, bf_list) {
int error = mwl_rxbuf_init(sc, bf);
if (error != 0) {
DPRINTF(sc, MWL_DEBUG_RECV,
"%s: mwl_rxbuf_init failed %d\n",
__func__, error);
return error;
}
if (prev != NULL) {
ds = prev->bf_desc;
ds->pPhysNext = htole32(bf->bf_daddr);
}
prev = bf;
}
if (prev != NULL) {
ds = prev->bf_desc;
ds->pPhysNext =
htole32(STAILQ_FIRST(&sc->sc_rxbuf)->bf_daddr);
}
sc->sc_recvsetup = 1;
}
mwl_mode_init(sc); /* set filters, etc. */
return 0;
}
static MWL_HAL_APMODE
mwl_getapmode(const struct ieee80211vap *vap, struct ieee80211_channel *chan)
{
MWL_HAL_APMODE mode;
if (IEEE80211_IS_CHAN_HT(chan)) {
if (vap->iv_flags_ht & IEEE80211_FHT_PUREN)
mode = AP_MODE_N_ONLY;
else if (IEEE80211_IS_CHAN_5GHZ(chan))
mode = AP_MODE_AandN;
else if (vap->iv_flags & IEEE80211_F_PUREG)
mode = AP_MODE_GandN;
else
mode = AP_MODE_BandGandN;
} else if (IEEE80211_IS_CHAN_ANYG(chan)) {
if (vap->iv_flags & IEEE80211_F_PUREG)
mode = AP_MODE_G_ONLY;
else
mode = AP_MODE_MIXED;
} else if (IEEE80211_IS_CHAN_B(chan))
mode = AP_MODE_B_ONLY;
else if (IEEE80211_IS_CHAN_A(chan))
mode = AP_MODE_A_ONLY;
else
mode = AP_MODE_MIXED; /* XXX should not happen? */
return mode;
}
static int
mwl_setapmode(struct ieee80211vap *vap, struct ieee80211_channel *chan)
{
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
return mwl_hal_setapmode(hvap, mwl_getapmode(vap, chan));
}
/*
* Set/change channels.
*/
static int
mwl_chan_set(struct mwl_softc *sc, struct ieee80211_channel *chan)
{
struct mwl_hal *mh = sc->sc_mh;
struct ieee80211com *ic = &sc->sc_ic;
MWL_HAL_CHANNEL hchan;
int maxtxpow;
DPRINTF(sc, MWL_DEBUG_RESET, "%s: chan %u MHz/flags 0x%x\n",
__func__, chan->ic_freq, chan->ic_flags);
/*
* Convert to a HAL channel description with
* the flags constrained to reflect the current
* operating mode.
*/
mwl_mapchan(&hchan, chan);
mwl_hal_intrset(mh, 0); /* disable interrupts */
#if 0
mwl_draintxq(sc); /* clear pending tx frames */
#endif
mwl_hal_setchannel(mh, &hchan);
/*
* Tx power is cap'd by the regulatory setting and
* possibly a user-set limit. We pass the min of
* these to the hal to apply them to the cal data
* for this channel.
* XXX min bound?
*/
maxtxpow = 2*chan->ic_maxregpower;
if (maxtxpow > ic->ic_txpowlimit)
maxtxpow = ic->ic_txpowlimit;
mwl_hal_settxpower(mh, &hchan, maxtxpow / 2);
/* NB: potentially change mcast/mgt rates */
mwl_setcurchanrates(sc);
/*
* Update internal state.
*/
sc->sc_tx_th.wt_chan_freq = htole16(chan->ic_freq);
sc->sc_rx_th.wr_chan_freq = htole16(chan->ic_freq);
if (IEEE80211_IS_CHAN_A(chan)) {
sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_A);
sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_A);
} else if (IEEE80211_IS_CHAN_ANYG(chan)) {
sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_G);
sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_G);
} else {
sc->sc_tx_th.wt_chan_flags = htole16(IEEE80211_CHAN_B);
sc->sc_rx_th.wr_chan_flags = htole16(IEEE80211_CHAN_B);
}
sc->sc_curchan = hchan;
mwl_hal_intrset(mh, sc->sc_imask);
return 0;
}
static void
mwl_scan_start(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
DPRINTF(sc, MWL_DEBUG_STATE, "%s\n", __func__);
}
static void
mwl_scan_end(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
DPRINTF(sc, MWL_DEBUG_STATE, "%s\n", __func__);
}
static void
mwl_set_channel(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
(void) mwl_chan_set(sc, ic->ic_curchan);
}
/*
* Handle a channel switch request. We inform the firmware
* and mark the global state to suppress various actions.
* NB: we issue only one request to the fw; we may be called
* multiple times if there are multiple vap's.
*/
static void
mwl_startcsa(struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
struct mwl_softc *sc = ic->ic_softc;
MWL_HAL_CHANNEL hchan;
if (sc->sc_csapending)
return;
mwl_mapchan(&hchan, ic->ic_csa_newchan);
/* 1 =>'s quiet channel */
mwl_hal_setchannelswitchie(sc->sc_mh, &hchan, 1, ic->ic_csa_count);
sc->sc_csapending = 1;
}
/*
* Plumb any static WEP key for the station. This is
* necessary as we must propagate the key from the
* global key table of the vap to each sta db entry.
*/
static void
mwl_setanywepkey(struct ieee80211vap *vap, const uint8_t mac[IEEE80211_ADDR_LEN])
{
if ((vap->iv_flags & (IEEE80211_F_PRIVACY|IEEE80211_F_WPA)) ==
IEEE80211_F_PRIVACY &&
vap->iv_def_txkey != IEEE80211_KEYIX_NONE &&
vap->iv_nw_keys[vap->iv_def_txkey].wk_keyix != IEEE80211_KEYIX_NONE)
(void) _mwl_key_set(vap, &vap->iv_nw_keys[vap->iv_def_txkey],
mac);
}
static int
mwl_peerstadb(struct ieee80211_node *ni, int aid, int staid, MWL_HAL_PEERINFO *pi)
{
#define WME(ie) ((const struct ieee80211_wme_info *) ie)
struct ieee80211vap *vap = ni->ni_vap;
struct mwl_hal_vap *hvap;
int error;
if (vap->iv_opmode == IEEE80211_M_WDS) {
/*
* WDS vap's do not have a f/w vap; instead they piggyback
* on an AP vap and we must install the sta db entry and
* crypto state using that AP's handle (the WDS vap has none).
*/
hvap = MWL_VAP(vap)->mv_ap_hvap;
} else
hvap = MWL_VAP(vap)->mv_hvap;
error = mwl_hal_newstation(hvap, ni->ni_macaddr,
aid, staid, pi,
ni->ni_flags & (IEEE80211_NODE_QOS | IEEE80211_NODE_HT),
ni->ni_ies.wme_ie != NULL ? WME(ni->ni_ies.wme_ie)->wme_info : 0);
if (error == 0) {
/*
* Setup security for this station. For sta mode this is
* needed even though do the same thing on transition to
* AUTH state because the call to mwl_hal_newstation
* clobbers the crypto state we setup.
*/
mwl_setanywepkey(vap, ni->ni_macaddr);
}
return error;
#undef WME
}
static void
mwl_setglobalkeys(struct ieee80211vap *vap)
{
struct ieee80211_key *wk;
wk = &vap->iv_nw_keys[0];
for (; wk < &vap->iv_nw_keys[IEEE80211_WEP_NKID]; wk++)
if (wk->wk_keyix != IEEE80211_KEYIX_NONE)
(void) _mwl_key_set(vap, wk, vap->iv_myaddr);
}
/*
* Convert a legacy rate set to a firmware bitmask.
*/
static uint32_t
get_rate_bitmap(const struct ieee80211_rateset *rs)
{
uint32_t rates;
int i;
rates = 0;
for (i = 0; i < rs->rs_nrates; i++)
switch (rs->rs_rates[i] & IEEE80211_RATE_VAL) {
case 2: rates |= 0x001; break;
case 4: rates |= 0x002; break;
case 11: rates |= 0x004; break;
case 22: rates |= 0x008; break;
case 44: rates |= 0x010; break;
case 12: rates |= 0x020; break;
case 18: rates |= 0x040; break;
case 24: rates |= 0x080; break;
case 36: rates |= 0x100; break;
case 48: rates |= 0x200; break;
case 72: rates |= 0x400; break;
case 96: rates |= 0x800; break;
case 108: rates |= 0x1000; break;
}
return rates;
}
/*
* Construct an HT firmware bitmask from an HT rate set.
*/
static uint32_t
get_htrate_bitmap(const struct ieee80211_htrateset *rs)
{
uint32_t rates;
int i;
rates = 0;
for (i = 0; i < rs->rs_nrates; i++) {
if (rs->rs_rates[i] < 16)
rates |= 1<<rs->rs_rates[i];
}
return rates;
}
/*
* Craft station database entry for station.
* NB: use host byte order here, the hal handles byte swapping.
*/
static MWL_HAL_PEERINFO *
mkpeerinfo(MWL_HAL_PEERINFO *pi, const struct ieee80211_node *ni)
{
const struct ieee80211vap *vap = ni->ni_vap;
memset(pi, 0, sizeof(*pi));
pi->LegacyRateBitMap = get_rate_bitmap(&ni->ni_rates);
pi->CapInfo = ni->ni_capinfo;
if (ni->ni_flags & IEEE80211_NODE_HT) {
/* HT capabilities, etc */
pi->HTCapabilitiesInfo = ni->ni_htcap;
/* XXX pi.HTCapabilitiesInfo */
pi->MacHTParamInfo = ni->ni_htparam;
pi->HTRateBitMap = get_htrate_bitmap(&ni->ni_htrates);
pi->AddHtInfo.ControlChan = ni->ni_htctlchan;
pi->AddHtInfo.AddChan = ni->ni_ht2ndchan;
pi->AddHtInfo.OpMode = ni->ni_htopmode;
pi->AddHtInfo.stbc = ni->ni_htstbc;
/* constrain according to local configuration */
if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI40) == 0)
pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_SHORTGI40;
if ((vap->iv_flags_ht & IEEE80211_FHT_SHORTGI20) == 0)
pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_SHORTGI20;
if (ni->ni_chw != 40)
pi->HTCapabilitiesInfo &= ~IEEE80211_HTCAP_CHWIDTH40;
}
return pi;
}
/*
* Re-create the local sta db entry for a vap to ensure
* up to date WME state is pushed to the firmware. Because
* this resets crypto state this must be followed by a
* reload of any keys in the global key table.
*/
static int
mwl_localstadb(struct ieee80211vap *vap)
{
#define WME(ie) ((const struct ieee80211_wme_info *) ie)
struct mwl_hal_vap *hvap = MWL_VAP(vap)->mv_hvap;
struct ieee80211_node *bss;
MWL_HAL_PEERINFO pi;
int error;
switch (vap->iv_opmode) {
case IEEE80211_M_STA:
bss = vap->iv_bss;
error = mwl_hal_newstation(hvap, vap->iv_myaddr, 0, 0,
vap->iv_state == IEEE80211_S_RUN ?
mkpeerinfo(&pi, bss) : NULL,
(bss->ni_flags & (IEEE80211_NODE_QOS | IEEE80211_NODE_HT)),
bss->ni_ies.wme_ie != NULL ?
WME(bss->ni_ies.wme_ie)->wme_info : 0);
if (error == 0)
mwl_setglobalkeys(vap);
break;
case IEEE80211_M_HOSTAP:
case IEEE80211_M_MBSS:
error = mwl_hal_newstation(hvap, vap->iv_myaddr,
0, 0, NULL, vap->iv_flags & IEEE80211_F_WME, 0);
if (error == 0)
mwl_setglobalkeys(vap);
break;
default:
error = 0;
break;
}
return error;
#undef WME
}
static int
mwl_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct mwl_vap *mvp = MWL_VAP(vap);
struct mwl_hal_vap *hvap = mvp->mv_hvap;
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_node *ni = NULL;
struct mwl_softc *sc = ic->ic_softc;
struct mwl_hal *mh = sc->sc_mh;
enum ieee80211_state ostate = vap->iv_state;
int error;
DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: %s -> %s\n",
vap->iv_ifp->if_xname, __func__,
ieee80211_state_name[ostate], ieee80211_state_name[nstate]);
callout_stop(&sc->sc_timer);
/*
* Clear current radar detection state.
*/
if (ostate == IEEE80211_S_CAC) {
/* stop quiet mode radar detection */
mwl_hal_setradardetection(mh, DR_CHK_CHANNEL_AVAILABLE_STOP);
} else if (sc->sc_radarena) {
/* stop in-service radar detection */
mwl_hal_setradardetection(mh, DR_DFS_DISABLE);
sc->sc_radarena = 0;
}
/*
* Carry out per-state actions before doing net80211 work.
*/
if (nstate == IEEE80211_S_INIT) {
/* NB: only ap+sta vap's have a fw entity */
if (hvap != NULL)
mwl_hal_stop(hvap);
} else if (nstate == IEEE80211_S_SCAN) {
mwl_hal_start(hvap);
/* NB: this disables beacon frames */
mwl_hal_setinframode(hvap);
} else if (nstate == IEEE80211_S_AUTH) {
/*
* Must create a sta db entry in case a WEP key needs to
* be plumbed. This entry will be overwritten if we
* associate; otherwise it will be reclaimed on node free.
*/
ni = vap->iv_bss;
MWL_NODE(ni)->mn_hvap = hvap;
(void) mwl_peerstadb(ni, 0, 0, NULL);
} else if (nstate == IEEE80211_S_CSA) {
/* XXX move to below? */
if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_MBSS)
mwl_startcsa(vap);
} else if (nstate == IEEE80211_S_CAC) {
/* XXX move to below? */
/* stop ap xmit and enable quiet mode radar detection */
mwl_hal_setradardetection(mh, DR_CHK_CHANNEL_AVAILABLE_START);
}
/*
* Invoke the parent method to do net80211 work.
*/
error = mvp->mv_newstate(vap, nstate, arg);
/*
* Carry out work that must be done after net80211 runs;
* this work requires up to date state (e.g. iv_bss).
*/
if (error == 0 && nstate == IEEE80211_S_RUN) {
/* NB: collect bss node again, it may have changed */
ni = vap->iv_bss;
DPRINTF(sc, MWL_DEBUG_STATE,
"%s: %s(RUN): iv_flags 0x%08x bintvl %d bssid %s "
"capinfo 0x%04x chan %d\n",
vap->iv_ifp->if_xname, __func__, vap->iv_flags,
ni->ni_intval, ether_sprintf(ni->ni_bssid), ni->ni_capinfo,
ieee80211_chan2ieee(ic, ic->ic_curchan));
/*
* Recreate local sta db entry to update WME/HT state.
*/
mwl_localstadb(vap);
switch (vap->iv_opmode) {
case IEEE80211_M_HOSTAP:
case IEEE80211_M_MBSS:
if (ostate == IEEE80211_S_CAC) {
/* enable in-service radar detection */
mwl_hal_setradardetection(mh,
DR_IN_SERVICE_MONITOR_START);
sc->sc_radarena = 1;
}
/*
* Allocate and setup the beacon frame
* (and related state).
*/
error = mwl_reset_vap(vap, IEEE80211_S_RUN);
if (error != 0) {
DPRINTF(sc, MWL_DEBUG_STATE,
"%s: beacon setup failed, error %d\n",
__func__, error);
goto bad;
}
/* NB: must be after setting up beacon */
mwl_hal_start(hvap);
break;
case IEEE80211_M_STA:
DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: aid 0x%x\n",
vap->iv_ifp->if_xname, __func__, ni->ni_associd);
/*
* Set state now that we're associated.
*/
mwl_hal_setassocid(hvap, ni->ni_bssid, ni->ni_associd);
mwl_setrates(vap);
mwl_hal_setrtsthreshold(hvap, vap->iv_rtsthreshold);
if ((vap->iv_flags & IEEE80211_F_DWDS) &&
sc->sc_ndwdsvaps++ == 0)
mwl_hal_setdwds(mh, 1);
break;
case IEEE80211_M_WDS:
DPRINTF(sc, MWL_DEBUG_STATE, "%s: %s: bssid %s\n",
vap->iv_ifp->if_xname, __func__,
ether_sprintf(ni->ni_bssid));
mwl_seteapolformat(vap);
break;
default:
break;
}
/*
* Set CS mode according to operating channel;
* this mostly an optimization for 5GHz.
*
* NB: must follow mwl_hal_start which resets csmode
*/
if (IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
mwl_hal_setcsmode(mh, CSMODE_AGGRESSIVE);
else
mwl_hal_setcsmode(mh, CSMODE_AUTO_ENA);
/*
* Start timer to prod firmware.
*/
if (sc->sc_ageinterval != 0)
callout_reset(&sc->sc_timer, sc->sc_ageinterval*hz,
mwl_agestations, sc);
} else if (nstate == IEEE80211_S_SLEEP) {
/* XXX set chip in power save */
} else if ((vap->iv_flags & IEEE80211_F_DWDS) &&
--sc->sc_ndwdsvaps == 0)
mwl_hal_setdwds(mh, 0);
bad:
return error;
}
/*
* Manage station id's; these are separate from AID's
* as AID's may have values out of the range of possible
* station id's acceptable to the firmware.
*/
static int
allocstaid(struct mwl_softc *sc, int aid)
{
int staid;
if (!(0 < aid && aid < MWL_MAXSTAID) || isset(sc->sc_staid, aid)) {
/* NB: don't use 0 */
for (staid = 1; staid < MWL_MAXSTAID; staid++)
if (isclr(sc->sc_staid, staid))
break;
} else
staid = aid;
setbit(sc->sc_staid, staid);
return staid;
}
static void
delstaid(struct mwl_softc *sc, int staid)
{
clrbit(sc->sc_staid, staid);
}
/*
* Setup driver-specific state for a newly associated node.
* Note that we're called also on a re-associate, the isnew
* param tells us if this is the first time or not.
*/
static void
mwl_newassoc(struct ieee80211_node *ni, int isnew)
{
struct ieee80211vap *vap = ni->ni_vap;
struct mwl_softc *sc = vap->iv_ic->ic_softc;
struct mwl_node *mn = MWL_NODE(ni);
MWL_HAL_PEERINFO pi;
uint16_t aid;
int error;
aid = IEEE80211_AID(ni->ni_associd);
if (isnew) {
mn->mn_staid = allocstaid(sc, aid);
mn->mn_hvap = MWL_VAP(vap)->mv_hvap;
} else {
mn = MWL_NODE(ni);
/* XXX reset BA stream? */
}
DPRINTF(sc, MWL_DEBUG_NODE, "%s: mac %s isnew %d aid %d staid %d\n",
__func__, ether_sprintf(ni->ni_macaddr), isnew, aid, mn->mn_staid);
error = mwl_peerstadb(ni, aid, mn->mn_staid, mkpeerinfo(&pi, ni));
if (error != 0) {
DPRINTF(sc, MWL_DEBUG_NODE,
"%s: error %d creating sta db entry\n",
__func__, error);
/* XXX how to deal with error? */
}
}
/*
* Periodically poke the firmware to age out station state
* (power save queues, pending tx aggregates).
*/
static void
mwl_agestations(void *arg)
{
struct mwl_softc *sc = arg;
mwl_hal_setkeepalive(sc->sc_mh);
if (sc->sc_ageinterval != 0) /* NB: catch dynamic changes */
callout_schedule(&sc->sc_timer, sc->sc_ageinterval*hz);
}
static const struct mwl_hal_channel *
findhalchannel(const MWL_HAL_CHANNELINFO *ci, int ieee)
{
int i;
for (i = 0; i < ci->nchannels; i++) {
const struct mwl_hal_channel *hc = &ci->channels[i];
if (hc->ieee == ieee)
return hc;
}
return NULL;
}
static int
mwl_setregdomain(struct ieee80211com *ic, struct ieee80211_regdomain *rd,
int nchan, struct ieee80211_channel chans[])
{
struct mwl_softc *sc = ic->ic_softc;
struct mwl_hal *mh = sc->sc_mh;
const MWL_HAL_CHANNELINFO *ci;
int i;
for (i = 0; i < nchan; i++) {
struct ieee80211_channel *c = &chans[i];
const struct mwl_hal_channel *hc;
if (IEEE80211_IS_CHAN_2GHZ(c)) {
mwl_hal_getchannelinfo(mh, MWL_FREQ_BAND_2DOT4GHZ,
IEEE80211_IS_CHAN_HT40(c) ?
MWL_CH_40_MHz_WIDTH : MWL_CH_20_MHz_WIDTH, &ci);
} else if (IEEE80211_IS_CHAN_5GHZ(c)) {
mwl_hal_getchannelinfo(mh, MWL_FREQ_BAND_5GHZ,
IEEE80211_IS_CHAN_HT40(c) ?
MWL_CH_40_MHz_WIDTH : MWL_CH_20_MHz_WIDTH, &ci);
} else {
device_printf(sc->sc_dev,
"%s: channel %u freq %u/0x%x not 2.4/5GHz\n",
__func__, c->ic_ieee, c->ic_freq, c->ic_flags);
return EINVAL;
}
/*
* Verify channel has cal data and cap tx power.
*/
hc = findhalchannel(ci, c->ic_ieee);
if (hc != NULL) {
if (c->ic_maxpower > 2*hc->maxTxPow)
c->ic_maxpower = 2*hc->maxTxPow;
goto next;
}
if (IEEE80211_IS_CHAN_HT40(c)) {
/*
* Look for the extension channel since the
* hal table only has the primary channel.
*/
hc = findhalchannel(ci, c->ic_extieee);
if (hc != NULL) {
if (c->ic_maxpower > 2*hc->maxTxPow)
c->ic_maxpower = 2*hc->maxTxPow;
goto next;
}
}
device_printf(sc->sc_dev,
"%s: no cal data for channel %u ext %u freq %u/0x%x\n",
__func__, c->ic_ieee, c->ic_extieee,
c->ic_freq, c->ic_flags);
return EINVAL;
next:
;
}
return 0;
}
#define IEEE80211_CHAN_HTG (IEEE80211_CHAN_HT|IEEE80211_CHAN_G)
#define IEEE80211_CHAN_HTA (IEEE80211_CHAN_HT|IEEE80211_CHAN_A)
static void
addht40channels(struct ieee80211_channel chans[], int maxchans, int *nchans,
const MWL_HAL_CHANNELINFO *ci, int flags)
{
int i, error;
for (i = 0; i < ci->nchannels; i++) {
const struct mwl_hal_channel *hc = &ci->channels[i];
error = ieee80211_add_channel_ht40(chans, maxchans, nchans,
hc->ieee, hc->maxTxPow, flags);
if (error != 0 && error != ENOENT)
break;
}
}
static void
addchannels(struct ieee80211_channel chans[], int maxchans, int *nchans,
const MWL_HAL_CHANNELINFO *ci, const uint8_t bands[])
{
int i, error;
error = 0;
for (i = 0; i < ci->nchannels && error == 0; i++) {
const struct mwl_hal_channel *hc = &ci->channels[i];
error = ieee80211_add_channel(chans, maxchans, nchans,
hc->ieee, hc->freq, hc->maxTxPow, 0, bands);
}
}
static void
getchannels(struct mwl_softc *sc, int maxchans, int *nchans,
struct ieee80211_channel chans[])
{
const MWL_HAL_CHANNELINFO *ci;
uint8_t bands[IEEE80211_MODE_BYTES];
/*
* Use the channel info from the hal to craft the
* channel list. Note that we pass back an unsorted
* list; the caller is required to sort it for us
* (if desired).
*/
*nchans = 0;
if (mwl_hal_getchannelinfo(sc->sc_mh,
MWL_FREQ_BAND_2DOT4GHZ, MWL_CH_20_MHz_WIDTH, &ci) == 0) {
memset(bands, 0, sizeof(bands));
setbit(bands, IEEE80211_MODE_11B);
setbit(bands, IEEE80211_MODE_11G);
setbit(bands, IEEE80211_MODE_11NG);
addchannels(chans, maxchans, nchans, ci, bands);
}
if (mwl_hal_getchannelinfo(sc->sc_mh,
MWL_FREQ_BAND_5GHZ, MWL_CH_20_MHz_WIDTH, &ci) == 0) {
memset(bands, 0, sizeof(bands));
setbit(bands, IEEE80211_MODE_11A);
setbit(bands, IEEE80211_MODE_11NA);
addchannels(chans, maxchans, nchans, ci, bands);
}
if (mwl_hal_getchannelinfo(sc->sc_mh,
MWL_FREQ_BAND_2DOT4GHZ, MWL_CH_40_MHz_WIDTH, &ci) == 0)
addht40channels(chans, maxchans, nchans, ci, IEEE80211_CHAN_HTG);
if (mwl_hal_getchannelinfo(sc->sc_mh,
MWL_FREQ_BAND_5GHZ, MWL_CH_40_MHz_WIDTH, &ci) == 0)
addht40channels(chans, maxchans, nchans, ci, IEEE80211_CHAN_HTA);
}
static void
mwl_getradiocaps(struct ieee80211com *ic,
int maxchans, int *nchans, struct ieee80211_channel chans[])
{
struct mwl_softc *sc = ic->ic_softc;
getchannels(sc, maxchans, nchans, chans);
}
static int
mwl_getchannels(struct mwl_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
/*
* Use the channel info from the hal to craft the
* channel list for net80211. Note that we pass up
* an unsorted list; net80211 will sort it for us.
*/
memset(ic->ic_channels, 0, sizeof(ic->ic_channels));
ic->ic_nchans = 0;
getchannels(sc, IEEE80211_CHAN_MAX, &ic->ic_nchans, ic->ic_channels);
ic->ic_regdomain.regdomain = SKU_DEBUG;
ic->ic_regdomain.country = CTRY_DEFAULT;
ic->ic_regdomain.location = 'I';
ic->ic_regdomain.isocc[0] = ' '; /* XXX? */
ic->ic_regdomain.isocc[1] = ' ';
return (ic->ic_nchans == 0 ? EIO : 0);
}
#undef IEEE80211_CHAN_HTA
#undef IEEE80211_CHAN_HTG
#ifdef MWL_DEBUG
static void
mwl_printrxbuf(const struct mwl_rxbuf *bf, u_int ix)
{
const struct mwl_rxdesc *ds = bf->bf_desc;
uint32_t status = le32toh(ds->Status);
printf("R[%2u] (DS.V:%p DS.P:0x%jx) NEXT:%08x DATA:%08x RC:%02x%s\n"
" STAT:%02x LEN:%04x RSSI:%02x CHAN:%02x RATE:%02x QOS:%04x HT:%04x\n",
ix, ds, (uintmax_t)bf->bf_daddr, le32toh(ds->pPhysNext),
le32toh(ds->pPhysBuffData), ds->RxControl,
ds->RxControl != EAGLE_RXD_CTRL_DRIVER_OWN ?
"" : (status & EAGLE_RXD_STATUS_OK) ? " *" : " !",
ds->Status, le16toh(ds->PktLen), ds->RSSI, ds->Channel,
ds->Rate, le16toh(ds->QosCtrl), le16toh(ds->HtSig2));
}
static void
mwl_printtxbuf(const struct mwl_txbuf *bf, u_int qnum, u_int ix)
{
const struct mwl_txdesc *ds = bf->bf_desc;
uint32_t status = le32toh(ds->Status);
printf("Q%u[%3u]", qnum, ix);
printf(" (DS.V:%p DS.P:0x%jx)\n", ds, (uintmax_t)bf->bf_daddr);
printf(" NEXT:%08x DATA:%08x LEN:%04x STAT:%08x%s\n",
le32toh(ds->pPhysNext),
le32toh(ds->PktPtr), le16toh(ds->PktLen), status,
status & EAGLE_TXD_STATUS_USED ?
"" : (status & 3) != 0 ? " *" : " !");
printf(" RATE:%02x PRI:%x QOS:%04x SAP:%08x FORMAT:%04x\n",
ds->DataRate, ds->TxPriority, le16toh(ds->QosCtrl),
le32toh(ds->SapPktInfo), le16toh(ds->Format));
#if MWL_TXDESC > 1
printf(" MULTIFRAMES:%u LEN:%04x %04x %04x %04x %04x %04x\n"
, le32toh(ds->multiframes)
, le16toh(ds->PktLenArray[0]), le16toh(ds->PktLenArray[1])
, le16toh(ds->PktLenArray[2]), le16toh(ds->PktLenArray[3])
, le16toh(ds->PktLenArray[4]), le16toh(ds->PktLenArray[5])
);
printf(" DATA:%08x %08x %08x %08x %08x %08x\n"
, le32toh(ds->PktPtrArray[0]), le32toh(ds->PktPtrArray[1])
, le32toh(ds->PktPtrArray[2]), le32toh(ds->PktPtrArray[3])
, le32toh(ds->PktPtrArray[4]), le32toh(ds->PktPtrArray[5])
);
#endif
#if 0
{ const uint8_t *cp = (const uint8_t *) ds;
int i;
for (i = 0; i < sizeof(struct mwl_txdesc); i++) {
printf("%02x ", cp[i]);
if (((i+1) % 16) == 0)
printf("\n");
}
printf("\n");
}
#endif
}
#endif /* MWL_DEBUG */
#if 0
static void
mwl_txq_dump(struct mwl_txq *txq)
{
struct mwl_txbuf *bf;
int i = 0;
MWL_TXQ_LOCK(txq);
STAILQ_FOREACH(bf, &txq->active, bf_list) {
struct mwl_txdesc *ds = bf->bf_desc;
MWL_TXDESC_SYNC(txq, ds,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
#ifdef MWL_DEBUG
mwl_printtxbuf(bf, txq->qnum, i);
#endif
i++;
}
MWL_TXQ_UNLOCK(txq);
}
#endif
static void
mwl_watchdog(void *arg)
{
struct mwl_softc *sc = arg;
callout_reset(&sc->sc_watchdog, hz, mwl_watchdog, sc);
if (sc->sc_tx_timer == 0 || --sc->sc_tx_timer > 0)
return;
if (sc->sc_running && !sc->sc_invalid) {
if (mwl_hal_setkeepalive(sc->sc_mh))
device_printf(sc->sc_dev,
"transmit timeout (firmware hung?)\n");
else
device_printf(sc->sc_dev,
"transmit timeout\n");
#if 0
mwl_reset(sc);
mwl_txq_dump(&sc->sc_txq[0]);/*XXX*/
#endif
counter_u64_add(sc->sc_ic.ic_oerrors, 1);
sc->sc_stats.mst_watchdog++;
}
}
#ifdef MWL_DIAGAPI
/*
* Diagnostic interface to the HAL. This is used by various
* tools to do things like retrieve register contents for
* debugging. The mechanism is intentionally opaque so that
* it can change frequently w/o concern for compatibility.
*/
static int
mwl_ioctl_diag(struct mwl_softc *sc, struct mwl_diag *md)
{
struct mwl_hal *mh = sc->sc_mh;
u_int id = md->md_id & MWL_DIAG_ID;
void *indata = NULL;
void *outdata = NULL;
u_int32_t insize = md->md_in_size;
u_int32_t outsize = md->md_out_size;
int error = 0;
if (md->md_id & MWL_DIAG_IN) {
/*
* Copy in data.
*/
indata = malloc(insize, M_TEMP, M_NOWAIT);
if (indata == NULL) {
error = ENOMEM;
goto bad;
}
error = copyin(md->md_in_data, indata, insize);
if (error)
goto bad;
}
if (md->md_id & MWL_DIAG_DYN) {
/*
* Allocate a buffer for the results (otherwise the HAL
* returns a pointer to a buffer where we can read the
* results). Note that we depend on the HAL leaving this
* pointer for us to use below in reclaiming the buffer;
* may want to be more defensive.
*/
outdata = malloc(outsize, M_TEMP, M_NOWAIT);
if (outdata == NULL) {
error = ENOMEM;
goto bad;
}
}
if (mwl_hal_getdiagstate(mh, id, indata, insize, &outdata, &outsize)) {
if (outsize < md->md_out_size)
md->md_out_size = outsize;
if (outdata != NULL)
error = copyout(outdata, md->md_out_data,
md->md_out_size);
} else {
error = EINVAL;
}
bad:
if ((md->md_id & MWL_DIAG_IN) && indata != NULL)
free(indata, M_TEMP);
if ((md->md_id & MWL_DIAG_DYN) && outdata != NULL)
free(outdata, M_TEMP);
return error;
}
static int
mwl_ioctl_reset(struct mwl_softc *sc, struct mwl_diag *md)
{
struct mwl_hal *mh = sc->sc_mh;
int error;
MWL_LOCK_ASSERT(sc);
if (md->md_id == 0 && mwl_hal_fwload(mh, NULL) != 0) {
device_printf(sc->sc_dev, "unable to load firmware\n");
return EIO;
}
if (mwl_hal_gethwspecs(mh, &sc->sc_hwspecs) != 0) {
device_printf(sc->sc_dev, "unable to fetch h/w specs\n");
return EIO;
}
error = mwl_setupdma(sc);
if (error != 0) {
/* NB: mwl_setupdma prints a msg */
return error;
}
/*
* Reset tx/rx data structures; after reload we must
* re-start the driver's notion of the next xmit/recv.
*/
mwl_draintxq(sc); /* clear pending frames */
mwl_resettxq(sc); /* rebuild tx q lists */
sc->sc_rxnext = NULL; /* force rx to start at the list head */
return 0;
}
#endif /* MWL_DIAGAPI */
static void
mwl_parent(struct ieee80211com *ic)
{
struct mwl_softc *sc = ic->ic_softc;
int startall = 0;
MWL_LOCK(sc);
if (ic->ic_nrunning > 0) {
if (sc->sc_running) {
/*
* To avoid rescanning another access point,
* do not call mwl_init() here. Instead,
* only reflect promisc mode settings.
*/
mwl_mode_init(sc);
} else {
/*
* Beware of being called during attach/detach
* to reset promiscuous mode. In that case we
* will still be marked UP but not RUNNING.
* However trying to re-init the interface
* is the wrong thing to do as we've already
* torn down much of our state. There's
* probably a better way to deal with this.
*/
if (!sc->sc_invalid) {
mwl_init(sc); /* XXX lose error */
startall = 1;
}
}
} else
mwl_stop(sc);
MWL_UNLOCK(sc);
if (startall)
ieee80211_start_all(ic);
}
static int
mwl_ioctl(struct ieee80211com *ic, u_long cmd, void *data)
{
struct mwl_softc *sc = ic->ic_softc;
struct ifreq *ifr = data;
int error = 0;
switch (cmd) {
case SIOCGMVSTATS:
mwl_hal_gethwstats(sc->sc_mh, &sc->sc_stats.hw_stats);
#if 0
/* NB: embed these numbers to get a consistent view */
sc->sc_stats.mst_tx_packets =
ifp->if_get_counter(ifp, IFCOUNTER_OPACKETS);
sc->sc_stats.mst_rx_packets =
ifp->if_get_counter(ifp, IFCOUNTER_IPACKETS);
#endif
/*
* NB: Drop the softc lock in case of a page fault;
* we'll accept any potential inconsisentcy in the
* statistics. The alternative is to copy the data
* to a local structure.
*/
return (copyout(&sc->sc_stats,
ifr->ifr_data, sizeof (sc->sc_stats)));
#ifdef MWL_DIAGAPI
case SIOCGMVDIAG:
/* XXX check privs */
return mwl_ioctl_diag(sc, (struct mwl_diag *) ifr);
case SIOCGMVRESET:
/* XXX check privs */
MWL_LOCK(sc);
error = mwl_ioctl_reset(sc,(struct mwl_diag *) ifr);
MWL_UNLOCK(sc);
break;
#endif /* MWL_DIAGAPI */
default:
error = ENOTTY;
break;
}
return (error);
}
#ifdef MWL_DEBUG
static int
mwl_sysctl_debug(SYSCTL_HANDLER_ARGS)
{
struct mwl_softc *sc = arg1;
int debug, error;
debug = sc->sc_debug | (mwl_hal_getdebug(sc->sc_mh) << 24);
error = sysctl_handle_int(oidp, &debug, 0, req);
if (error || !req->newptr)
return error;
mwl_hal_setdebug(sc->sc_mh, debug >> 24);
sc->sc_debug = debug & 0x00ffffff;
return 0;
}
#endif /* MWL_DEBUG */
static void
mwl_sysctlattach(struct mwl_softc *sc)
{
#ifdef MWL_DEBUG
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev);
struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev);
sc->sc_debug = mwl_debug;
SYSCTL_ADD_PROC(ctx, SYSCTL_CHILDREN(tree), OID_AUTO,
"debug", CTLTYPE_INT | CTLFLAG_RW, sc, 0,
mwl_sysctl_debug, "I", "control debugging printfs");
#endif
}
/*
* Announce various information on device/driver attach.
*/
static void
mwl_announce(struct mwl_softc *sc)
{
device_printf(sc->sc_dev, "Rev A%d hardware, v%d.%d.%d.%d firmware (regioncode %d)\n",
sc->sc_hwspecs.hwVersion,
(sc->sc_hwspecs.fwReleaseNumber>>24) & 0xff,
(sc->sc_hwspecs.fwReleaseNumber>>16) & 0xff,
(sc->sc_hwspecs.fwReleaseNumber>>8) & 0xff,
(sc->sc_hwspecs.fwReleaseNumber>>0) & 0xff,
sc->sc_hwspecs.regionCode);
sc->sc_fwrelease = sc->sc_hwspecs.fwReleaseNumber;
if (bootverbose) {
int i;
for (i = 0; i <= WME_AC_VO; i++) {
struct mwl_txq *txq = sc->sc_ac2q[i];
device_printf(sc->sc_dev, "Use hw queue %u for %s traffic\n",
txq->qnum, ieee80211_wme_acnames[i]);
}
}
if (bootverbose || mwl_rxdesc != MWL_RXDESC)
device_printf(sc->sc_dev, "using %u rx descriptors\n", mwl_rxdesc);
if (bootverbose || mwl_rxbuf != MWL_RXBUF)
device_printf(sc->sc_dev, "using %u rx buffers\n", mwl_rxbuf);
if (bootverbose || mwl_txbuf != MWL_TXBUF)
device_printf(sc->sc_dev, "using %u tx buffers\n", mwl_txbuf);
if (bootverbose && mwl_hal_ismbsscapable(sc->sc_mh))
device_printf(sc->sc_dev, "multi-bss support\n");
#ifdef MWL_TX_NODROP
if (bootverbose)
device_printf(sc->sc_dev, "no tx drop\n");
#endif
}
Reference in New Issue View Git Blame Copy Permalink