8f00b27bc3
Addtron appear to have their own VIA Rhine II and RealTek 8139 boards with custom PCI vendor and device IDs. This commit updates the PCI vendor and device lists in the vr and rl drivers so that we can probe the additional devices. Found by: nosing around the PCI vendor and device code list at: http://www.halcyon.com/scripts/jboemler/pci/pcicode
575 lines
17 KiB
C
575 lines
17 KiB
C
/*
|
|
* Copyright (c) 1997, 1998
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id: if_rlreg.h,v 1.16 1999/02/23 06:42:42 wpaul Exp $
|
|
*/
|
|
|
|
/*
|
|
* RealTek 8129/8139 register offsets
|
|
*/
|
|
#define RL_IDR0 0x0000 /* ID register 0 (station addr) */
|
|
#define RL_IDR1 0x0001 /* Must use 32-bit accesses (?) */
|
|
#define RL_IDR2 0x0002
|
|
#define RL_IDR3 0x0003
|
|
#define RL_IDR4 0x0004
|
|
#define RL_IDR5 0x0005
|
|
/* 0006-0007 reserved */
|
|
#define RL_MAR0 0x0008 /* Multicast hash table */
|
|
#define RL_MAR1 0x0009
|
|
#define RL_MAR2 0x000A
|
|
#define RL_MAR3 0x000B
|
|
#define RL_MAR4 0x000C
|
|
#define RL_MAR5 0x000D
|
|
#define RL_MAR6 0x000E
|
|
#define RL_MAR7 0x000F
|
|
|
|
#define RL_TXSTAT0 0x0010 /* status of TX descriptor 0 */
|
|
#define RL_TXSTAT1 0x0014 /* status of TX descriptor 1 */
|
|
#define RL_TXSTAT2 0x0018 /* status of TX descriptor 2 */
|
|
#define RL_TXSTAT3 0x001C /* status of TX descriptor 3 */
|
|
|
|
#define RL_TXADDR0 0x0020 /* address of TX descriptor 0 */
|
|
#define RL_TXADDR1 0x0024 /* address of TX descriptor 1 */
|
|
#define RL_TXADDR2 0x0028 /* address of TX descriptor 2 */
|
|
#define RL_TXADDR3 0x002C /* address of TX descriptor 3 */
|
|
|
|
#define RL_RXADDR 0x0030 /* RX ring start address */
|
|
#define RL_RX_EARLY_BYTES 0x0034 /* RX early byte count */
|
|
#define RL_RX_EARLY_STAT 0x0036 /* RX early status */
|
|
#define RL_COMMAND 0x0037 /* command register */
|
|
#define RL_CURRXADDR 0x0038 /* current address of packet read */
|
|
#define RL_CURRXBUF 0x003A /* current RX buffer address */
|
|
#define RL_IMR 0x003C /* interrupt mask register */
|
|
#define RL_ISR 0x003E /* interrupt status register */
|
|
#define RL_TXCFG 0x0040 /* transmit config */
|
|
#define RL_RXCFG 0x0044 /* receive config */
|
|
#define RL_TIMERCNT 0x0048 /* timer count register */
|
|
#define RL_MISSEDPKT 0x004C /* missed packet counter */
|
|
#define RL_EECMD 0x0050 /* EEPROM command register */
|
|
#define RL_CFG0 0x0051 /* config register #0 */
|
|
#define RL_CFG1 0x0052 /* config register #1 */
|
|
/* 0053-0057 reserved */
|
|
#define RL_MEDIASTAT 0x0058 /* media status register (8139) */
|
|
/* 0059-005A reserved */
|
|
#define RL_MII 0x005A /* 8129 chip only */
|
|
#define RL_HALTCLK 0x005B
|
|
#define RL_MULTIINTR 0x005C /* multiple interrupt */
|
|
#define RL_PCIREV 0x005E /* PCI revision value */
|
|
/* 005F reserved */
|
|
#define RL_TXSTAT_ALL 0x0060 /* TX status of all descriptors */
|
|
|
|
/* Direct PHY access registers only available on 8139 */
|
|
#define RL_BMCR 0x0062 /* PHY basic mode control */
|
|
#define RL_BMSR 0x0064 /* PHY basic mode status */
|
|
#define RL_ANAR 0x0066 /* PHY autoneg advert */
|
|
#define RL_LPAR 0x0068 /* PHY link partner ability */
|
|
#define RL_ANER 0x006A /* PHY autoneg expansion */
|
|
|
|
#define RL_DISCCNT 0x006C /* disconnect counter */
|
|
#define RL_FALSECAR 0x006E /* false carrier counter */
|
|
#define RL_NWAYTST 0x0070 /* NWAY test register */
|
|
#define RL_RX_ER 0x0072 /* RX_ER counter */
|
|
#define RL_CSCFG 0x0074 /* CS configuration register */
|
|
|
|
|
|
/*
|
|
* TX config register bits
|
|
*/
|
|
#define RL_TXCFG_CLRABRT 0x00000001 /* retransmit aborted pkt */
|
|
#define RL_TXCFG_MXDMA0 0x00000100 /* max DMA burst size */
|
|
#define RL_TXCFG_MXDMA1 0x00000200
|
|
#define RL_TXCFG_MXDMA2 0x00000400
|
|
#define RL_TXCFG_CRCAPPEND 0x00010000 /* CRC append (0 = yes) */
|
|
#define RL_TXCFG_LOOPBKTST0 0x00020000 /* loopback test */
|
|
#define RL_TXCFG_LOOPBKTST1 0x00040000 /* loopback test */
|
|
#define RL_TXCFG_IFG0 0x01000000 /* interframe gap */
|
|
#define RL_TXCFG_IFG1 0x02000000 /* interframe gap */
|
|
|
|
/*
|
|
* Transmit descriptor status register bits.
|
|
*/
|
|
#define RL_TXSTAT_LENMASK 0x00001FFF
|
|
#define RL_TXSTAT_OWN 0x00002000
|
|
#define RL_TXSTAT_TX_UNDERRUN 0x00004000
|
|
#define RL_TXSTAT_TX_OK 0x00008000
|
|
#define RL_TXSTAT_EARLY_THRESH 0x003F0000
|
|
#define RL_TXSTAT_COLLCNT 0x0F000000
|
|
#define RL_TXSTAT_CARR_HBEAT 0x10000000
|
|
#define RL_TXSTAT_OUTOFWIN 0x20000000
|
|
#define RL_TXSTAT_TXABRT 0x40000000
|
|
#define RL_TXSTAT_CARRLOSS 0x80000000
|
|
|
|
/*
|
|
* Interrupt status register bits.
|
|
*/
|
|
#define RL_ISR_RX_OK 0x0001
|
|
#define RL_ISR_RX_ERR 0x0002
|
|
#define RL_ISR_TX_OK 0x0004
|
|
#define RL_ISR_TX_ERR 0x0008
|
|
#define RL_ISR_RX_OVERRUN 0x0010
|
|
#define RL_ISR_PKT_UNDERRUN 0x0020
|
|
#define RL_ISR_FIFO_OFLOW 0x0040 /* 8139 only */
|
|
#define RL_ISR_PCS_TIMEOUT 0x4000 /* 8129 only */
|
|
#define RL_ISR_SYSTEM_ERR 0x8000
|
|
|
|
#define RL_INTRS \
|
|
(RL_ISR_TX_OK|RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_TX_ERR| \
|
|
RL_ISR_RX_OVERRUN|RL_ISR_PKT_UNDERRUN|RL_ISR_FIFO_OFLOW| \
|
|
RL_ISR_PCS_TIMEOUT|RL_ISR_SYSTEM_ERR)
|
|
|
|
/*
|
|
* Media status register. (8139 only)
|
|
*/
|
|
#define RL_MEDIASTAT_RXPAUSE 0x01
|
|
#define RL_MEDIASTAT_TXPAUSE 0x02
|
|
#define RL_MEDIASTAT_LINK 0x04
|
|
#define RL_MEDIASTAT_SPEED10 0x08
|
|
#define RL_MEDIASTAT_RXFLOWCTL 0x40 /* duplex mode */
|
|
#define RL_MEDIASTAT_TXFLOWCTL 0x80 /* duplex mode */
|
|
|
|
/*
|
|
* Receive config register.
|
|
*/
|
|
#define RL_RXCFG_RX_ALLPHYS 0x00000001 /* accept all nodes */
|
|
#define RL_RXCFG_RX_INDIV 0x00000002 /* match filter */
|
|
#define RL_RXCFG_RX_MULTI 0x00000004 /* accept all multicast */
|
|
#define RL_RXCFG_RX_BROAD 0x00000008 /* accept all broadcast */
|
|
#define RL_RXCFG_RX_RUNT 0x00000010
|
|
#define RL_RXCFG_RX_ERRPKT 0x00000020
|
|
#define RL_RXCFG_WRAP 0x00000080
|
|
#define RL_RXCFG_MAXDMA (0x00000100|0x00000200|0x00000400)
|
|
#define RL_RXCFG_BUFSZ (0x00000800|0x00001000)
|
|
#define RL_RXCFG_FIFOTHRESH (0x00002000|0x00004000|0x00008000)
|
|
#define RL_RXCFG_EARLYTHRESH (0x01000000|0x02000000|0x04000000)
|
|
|
|
#define RL_RXBUF_8 0x00000000
|
|
#define RL_RXBUF_16 0x00000800
|
|
#define RL_RXBUF_32 0x00001000
|
|
#define RL_RXBUF_64 (0x00001000|0x00000800)
|
|
|
|
/*
|
|
* Bits in RX status header (included with RX'ed packet
|
|
* in ring buffer).
|
|
*/
|
|
#define RL_RXSTAT_RXOK 0x00000001
|
|
#define RL_RXSTAT_ALIGNERR 0x00000002
|
|
#define RL_RXSTAT_CRCERR 0x00000004
|
|
#define RL_RXSTAT_GIANT 0x00000008
|
|
#define RL_RXSTAT_RUNT 0x00000010
|
|
#define RL_RXSTAT_BADSYM 0x00000020
|
|
#define RL_RXSTAT_BROAD 0x00002000
|
|
#define RL_RXSTAT_INDIV 0x00004000
|
|
#define RL_RXSTAT_MULTI 0x00008000
|
|
#define RL_RXSTAT_LENMASK 0xFFFF0000
|
|
|
|
#define RL_RXSTAT_UNFINISHED 0xFFF0 /* DMA still in progress */
|
|
/*
|
|
* Command register.
|
|
*/
|
|
#define RL_CMD_EMPTY_RXBUF 0x0001
|
|
#define RL_CMD_TX_ENB 0x0004
|
|
#define RL_CMD_RX_ENB 0x0008
|
|
#define RL_CMD_RESET 0x0010
|
|
|
|
/*
|
|
* EEPROM control register
|
|
*/
|
|
#define RL_EE_DATAOUT 0x01 /* Data out */
|
|
#define RL_EE_DATAIN 0x02 /* Data in */
|
|
#define RL_EE_CLK 0x04 /* clock */
|
|
#define RL_EE_SEL 0x08 /* chip select */
|
|
#define RL_EE_MODE (0x40|0x80)
|
|
|
|
#define RL_EEMODE_OFF 0x00
|
|
#define RL_EEMODE_AUTOLOAD 0x40
|
|
#define RL_EEMODE_PROGRAM 0x80
|
|
#define RL_EEMODE_WRITECFG (0x80|0x40)
|
|
|
|
/* 9346 EEPROM commands */
|
|
#define RL_EECMD_WRITE 0x140
|
|
#define RL_EECMD_READ 0x180
|
|
#define RL_EECMD_ERASE 0x1c0
|
|
|
|
#define RL_EE_ID 0x00
|
|
#define RL_EE_PCI_VID 0x01
|
|
#define RL_EE_PCI_DID 0x02
|
|
/* Location of station address inside EEPROM */
|
|
#define RL_EE_EADDR 0x07
|
|
|
|
/*
|
|
* MII register (8129 only)
|
|
*/
|
|
#define RL_MII_CLK 0x01
|
|
#define RL_MII_DATAIN 0x02
|
|
#define RL_MII_DATAOUT 0x04
|
|
#define RL_MII_DIR 0x80 /* 0 == input, 1 == output */
|
|
|
|
/*
|
|
* Config 0 register
|
|
*/
|
|
#define RL_CFG0_ROM0 0x01
|
|
#define RL_CFG0_ROM1 0x02
|
|
#define RL_CFG0_ROM2 0x04
|
|
#define RL_CFG0_PL0 0x08
|
|
#define RL_CFG0_PL1 0x10
|
|
#define RL_CFG0_10MBPS 0x20 /* 10 Mbps internal mode */
|
|
#define RL_CFG0_PCS 0x40
|
|
#define RL_CFG0_SCR 0x80
|
|
|
|
/*
|
|
* Config 1 register
|
|
*/
|
|
#define RL_CFG1_PWRDWN 0x01
|
|
#define RL_CFG1_SLEEP 0x02
|
|
#define RL_CFG1_IOMAP 0x04
|
|
#define RL_CFG1_MEMMAP 0x08
|
|
#define RL_CFG1_RSVD 0x10
|
|
#define RL_CFG1_DRVLOAD 0x20
|
|
#define RL_CFG1_LED0 0x40
|
|
#define RL_CFG1_FULLDUPLEX 0x40 /* 8129 only */
|
|
#define RL_CFG1_LED1 0x80
|
|
|
|
/*
|
|
* The RealTek doesn't use a fragment-based descriptor mechanism.
|
|
* Instead, there are only four register sets, each or which represents
|
|
* one 'descriptor.' Basically, each TX descriptor is just a contiguous
|
|
* packet buffer (32-bit aligned!) and we place the buffer addresses in
|
|
* the registers so the chip knows where they are.
|
|
*
|
|
* We can sort of kludge together the same kind of buffer management
|
|
* used in previous drivers, but we have to do buffer copies almost all
|
|
* the time, so it doesn't really buy us much.
|
|
*
|
|
* For reception, there's just one large buffer where the chip stores
|
|
* all received packets.
|
|
*/
|
|
|
|
#define RL_RX_BUF_SZ RL_RXBUF_64
|
|
#define RL_RXBUFLEN (1 << ((RL_RX_BUF_SZ >> 11) + 13))
|
|
#define RL_TX_LIST_CNT 4
|
|
#define RL_MIN_FRAMELEN 60
|
|
#define RL_TX_EARLYTHRESH 0x80000 /* 256 << 11 */
|
|
#define RL_RX_FIFOTHRESH 0x8000 /* 4 << 13 */
|
|
#define RL_RX_MAXDMA 0x00000400
|
|
|
|
#define RL_RXCFG_CONFIG (RL_RX_FIFOTHRESH|RL_RX_BUF_SZ)
|
|
|
|
struct rl_chain {
|
|
char rl_desc; /* descriptor register idx */
|
|
struct mbuf *rl_mbuf;
|
|
struct rl_chain *rl_next;
|
|
};
|
|
|
|
struct rl_chain_data {
|
|
u_int16_t cur_rx;
|
|
caddr_t rl_rx_buf;
|
|
struct rl_chain rl_tx_chain[RL_TX_LIST_CNT];
|
|
|
|
int rl_tx_cnt;
|
|
struct rl_chain *rl_tx_cur;
|
|
struct rl_chain *rl_tx_free;
|
|
};
|
|
|
|
struct rl_type {
|
|
u_int16_t rl_vid;
|
|
u_int16_t rl_did;
|
|
char *rl_name;
|
|
};
|
|
|
|
struct rl_mii_frame {
|
|
u_int8_t mii_stdelim;
|
|
u_int8_t mii_opcode;
|
|
u_int8_t mii_phyaddr;
|
|
u_int8_t mii_regaddr;
|
|
u_int8_t mii_turnaround;
|
|
u_int16_t mii_data;
|
|
};
|
|
|
|
/*
|
|
* MII constants
|
|
*/
|
|
#define RL_MII_STARTDELIM 0x01
|
|
#define RL_MII_READOP 0x02
|
|
#define RL_MII_WRITEOP 0x01
|
|
#define RL_MII_TURNAROUND 0x02
|
|
|
|
#define RL_FLAG_FORCEDELAY 1
|
|
#define RL_FLAG_SCHEDDELAY 2
|
|
#define RL_FLAG_DELAYTIMEO 3
|
|
|
|
#define RL_8129 1
|
|
#define RL_8139 2
|
|
|
|
struct rl_softc {
|
|
struct arpcom arpcom; /* interface info */
|
|
struct ifmedia ifmedia; /* media info */
|
|
bus_space_handle_t rl_bhandle; /* bus space handle */
|
|
bus_space_tag_t rl_btag; /* bus space tag */
|
|
struct rl_type *rl_pinfo; /* phy info */
|
|
u_int8_t rl_unit; /* interface number */
|
|
u_int8_t rl_type;
|
|
u_int8_t rl_phy_addr; /* PHY address */
|
|
u_int8_t rl_tx_pend; /* TX pending */
|
|
u_int8_t rl_want_auto;
|
|
u_int8_t rl_autoneg;
|
|
u_int8_t rl_stats_no_timeout;
|
|
struct rl_chain_data rl_cdata;
|
|
};
|
|
|
|
/*
|
|
* register space access macros
|
|
*/
|
|
#define CSR_WRITE_4(sc, reg, val) \
|
|
bus_space_write_4(sc->rl_btag, sc->rl_bhandle, reg, val)
|
|
#define CSR_WRITE_2(sc, reg, val) \
|
|
bus_space_write_2(sc->rl_btag, sc->rl_bhandle, reg, val)
|
|
#define CSR_WRITE_1(sc, reg, val) \
|
|
bus_space_write_1(sc->rl_btag, sc->rl_bhandle, reg, val)
|
|
|
|
#define CSR_READ_4(sc, reg) \
|
|
bus_space_read_4(sc->rl_btag, sc->rl_bhandle, reg)
|
|
#define CSR_READ_2(sc, reg) \
|
|
bus_space_read_2(sc->rl_btag, sc->rl_bhandle, reg)
|
|
#define CSR_READ_1(sc, reg) \
|
|
bus_space_read_1(sc->rl_btag, sc->rl_bhandle, reg)
|
|
|
|
#define RL_TIMEOUT 1000
|
|
|
|
/*
|
|
* General constants that are fun to know.
|
|
*
|
|
* RealTek PCI vendor ID
|
|
*/
|
|
#define RT_VENDORID 0x10EC
|
|
|
|
/*
|
|
* RealTek chip device IDs.
|
|
*/
|
|
#define RT_DEVICEID_8129 0x8129
|
|
#define RT_DEVICEID_8139 0x8139
|
|
|
|
/*
|
|
* Accton PCI vendor ID
|
|
*/
|
|
#define ACCTON_VENDORID 0x1113
|
|
|
|
/*
|
|
* Accton MPX 5030/5038 device ID.
|
|
*/
|
|
#define ACCTON_DEVICEID_5030 0x1211
|
|
|
|
/*
|
|
* Delta Electronics Vendor ID.
|
|
*/
|
|
#define DELTA_VENDORID 0x1500
|
|
|
|
/*
|
|
* Delta device IDs.
|
|
*/
|
|
#define DELTA_DEVICEID_8139 0x1360
|
|
|
|
/*
|
|
* Addtron vendor ID.
|
|
*/
|
|
#define ADDTRON_VENDORID 0x4033
|
|
|
|
/*
|
|
* Addtron device IDs.
|
|
*/
|
|
#define ADDTRON_DEVICEID_8139 0x1360
|
|
|
|
/*
|
|
* Texas Instruments PHY identifiers
|
|
*/
|
|
#define TI_PHY_VENDORID 0x4000
|
|
#define TI_PHY_10BT 0x501F
|
|
#define TI_PHY_100VGPMI 0x502F
|
|
|
|
/*
|
|
* These ID values are for the NS DP83840A 10/100 PHY
|
|
*/
|
|
#define NS_PHY_VENDORID 0x2000
|
|
#define NS_PHY_83840A 0x5C0F
|
|
|
|
/*
|
|
* Level 1 10/100 PHY
|
|
*/
|
|
#define LEVEL1_PHY_VENDORID 0x7810
|
|
#define LEVEL1_PHY_LXT970 0x000F
|
|
|
|
/*
|
|
* Intel 82555 10/100 PHY
|
|
*/
|
|
#define INTEL_PHY_VENDORID 0x0A28
|
|
#define INTEL_PHY_82555 0x015F
|
|
|
|
/*
|
|
* SEEQ 80220 10/100 PHY
|
|
*/
|
|
#define SEEQ_PHY_VENDORID 0x0016
|
|
#define SEEQ_PHY_80220 0xF83F
|
|
|
|
|
|
/*
|
|
* PCI low memory base and low I/O base register, and
|
|
* other PCI registers. Note: some are only available on
|
|
* the 3c905B, in particular those that related to power management.
|
|
*/
|
|
|
|
#define RL_PCI_VENDOR_ID 0x00
|
|
#define RL_PCI_DEVICE_ID 0x02
|
|
#define RL_PCI_COMMAND 0x04
|
|
#define RL_PCI_STATUS 0x06
|
|
#define RL_PCI_CLASSCODE 0x09
|
|
#define RL_PCI_LATENCY_TIMER 0x0D
|
|
#define RL_PCI_HEADER_TYPE 0x0E
|
|
#define RL_PCI_LOIO 0x10
|
|
#define RL_PCI_LOMEM 0x14
|
|
#define RL_PCI_BIOSROM 0x30
|
|
#define RL_PCI_INTLINE 0x3C
|
|
#define RL_PCI_INTPIN 0x3D
|
|
#define RL_PCI_MINGNT 0x3E
|
|
#define RL_PCI_MINLAT 0x0F
|
|
#define RL_PCI_RESETOPT 0x48
|
|
#define RL_PCI_EEPROM_DATA 0x4C
|
|
|
|
#define RL_PCI_CAPID 0xDC /* 8 bits */
|
|
#define RL_PCI_NEXTPTR 0xDD /* 8 bits */
|
|
#define RL_PCI_PWRMGMTCAP 0xDE /* 16 bits */
|
|
#define RL_PCI_PWRMGMTCTRL 0xE0 /* 16 bits */
|
|
|
|
#define RL_PSTATE_MASK 0x0003
|
|
#define RL_PSTATE_D0 0x0000
|
|
#define RL_PSTATE_D1 0x0002
|
|
#define RL_PSTATE_D2 0x0002
|
|
#define RL_PSTATE_D3 0x0003
|
|
#define RL_PME_EN 0x0010
|
|
#define RL_PME_STATUS 0x8000
|
|
|
|
#define PHY_UNKNOWN 6
|
|
|
|
#define RL_PHYADDR_MIN 0x00
|
|
#define RL_PHYADDR_MAX 0x1F
|
|
|
|
#define PHY_BMCR 0x00
|
|
#define PHY_BMSR 0x01
|
|
#define PHY_VENID 0x02
|
|
#define PHY_DEVID 0x03
|
|
#define PHY_ANAR 0x04
|
|
#define PHY_LPAR 0x05
|
|
#define PHY_ANEXP 0x06
|
|
|
|
#define PHY_ANAR_NEXTPAGE 0x8000
|
|
#define PHY_ANAR_RSVD0 0x4000
|
|
#define PHY_ANAR_TLRFLT 0x2000
|
|
#define PHY_ANAR_RSVD1 0x1000
|
|
#define PHY_ANAR_RSVD2 0x0800
|
|
#define PHY_ANAR_RSVD3 0x0400
|
|
#define PHY_ANAR_100BT4 0x0200
|
|
#define PHY_ANAR_100BTXFULL 0x0100
|
|
#define PHY_ANAR_100BTXHALF 0x0080
|
|
#define PHY_ANAR_10BTFULL 0x0040
|
|
#define PHY_ANAR_10BTHALF 0x0020
|
|
#define PHY_ANAR_PROTO4 0x0010
|
|
#define PHY_ANAR_PROTO3 0x0008
|
|
#define PHY_ANAR_PROTO2 0x0004
|
|
#define PHY_ANAR_PROTO1 0x0002
|
|
#define PHY_ANAR_PROTO0 0x0001
|
|
|
|
/*
|
|
* These are the register definitions for the PHY (physical layer
|
|
* interface chip).
|
|
*/
|
|
/*
|
|
* PHY BMCR Basic Mode Control Register
|
|
*/
|
|
#define PHY_BMCR_RESET 0x8000
|
|
#define PHY_BMCR_LOOPBK 0x4000
|
|
#define PHY_BMCR_SPEEDSEL 0x2000
|
|
#define PHY_BMCR_AUTONEGENBL 0x1000
|
|
#define PHY_BMCR_RSVD0 0x0800 /* write as zero */
|
|
#define PHY_BMCR_ISOLATE 0x0400
|
|
#define PHY_BMCR_AUTONEGRSTR 0x0200
|
|
#define PHY_BMCR_DUPLEX 0x0100
|
|
#define PHY_BMCR_COLLTEST 0x0080
|
|
#define PHY_BMCR_RSVD1 0x0040 /* write as zero, don't care */
|
|
#define PHY_BMCR_RSVD2 0x0020 /* write as zero, don't care */
|
|
#define PHY_BMCR_RSVD3 0x0010 /* write as zero, don't care */
|
|
#define PHY_BMCR_RSVD4 0x0008 /* write as zero, don't care */
|
|
#define PHY_BMCR_RSVD5 0x0004 /* write as zero, don't care */
|
|
#define PHY_BMCR_RSVD6 0x0002 /* write as zero, don't care */
|
|
#define PHY_BMCR_RSVD7 0x0001 /* write as zero, don't care */
|
|
/*
|
|
* RESET: 1 == software reset, 0 == normal operation
|
|
* Resets status and control registers to default values.
|
|
* Relatches all hardware config values.
|
|
*
|
|
* LOOPBK: 1 == loopback operation enabled, 0 == normal operation
|
|
*
|
|
* SPEEDSEL: 1 == 100Mb/s, 0 == 10Mb/s
|
|
* Link speed is selected byt his bit or if auto-negotiation if bit
|
|
* 12 (AUTONEGENBL) is set (in which case the value of this register
|
|
* is ignored).
|
|
*
|
|
* AUTONEGENBL: 1 == Autonegotiation enabled, 0 == Autonegotiation disabled
|
|
* Bits 8 and 13 are ignored when autoneg is set, otherwise bits 8 and 13
|
|
* determine speed and mode. Should be cleared and then set if PHY configured
|
|
* for no autoneg on startup.
|
|
*
|
|
* ISOLATE: 1 == isolate PHY from MII, 0 == normal operation
|
|
*
|
|
* AUTONEGRSTR: 1 == restart autonegotiation, 0 = normal operation
|
|
*
|
|
* DUPLEX: 1 == full duplex mode, 0 == half duplex mode
|
|
*
|
|
* COLLTEST: 1 == collision test enabled, 0 == normal operation
|
|
*/
|
|
|
|
/*
|
|
* PHY, BMSR Basic Mode Status Register
|
|
*/
|
|
#define PHY_BMSR_100BT4 0x8000
|
|
#define PHY_BMSR_100BTXFULL 0x4000
|
|
#define PHY_BMSR_100BTXHALF 0x2000
|
|
#define PHY_BMSR_10BTFULL 0x1000
|
|
#define PHY_BMSR_10BTHALF 0x0800
|
|
#define PHY_BMSR_RSVD1 0x0400 /* write as zero, don't care */
|
|
#define PHY_BMSR_RSVD2 0x0200 /* write as zero, don't care */
|
|
#define PHY_BMSR_RSVD3 0x0100 /* write as zero, don't care */
|
|
#define PHY_BMSR_RSVD4 0x0080 /* write as zero, don't care */
|
|
#define PHY_BMSR_MFPRESUP 0x0040
|
|
#define PHY_BMSR_AUTONEGCOMP 0x0020
|
|
#define PHY_BMSR_REMFAULT 0x0010
|
|
#define PHY_BMSR_CANAUTONEG 0x0008
|
|
#define PHY_BMSR_LINKSTAT 0x0004
|
|
#define PHY_BMSR_JABBER 0x0002
|
|
#define PHY_BMSR_EXTENDED 0x0001
|