408 lines
11 KiB
C
408 lines
11 KiB
C
/*-
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Pseudo-driver for internal NWAY support on DEC 21143 and workalike
|
|
* controllers. Technically we're abusing the miibus code to handle
|
|
* media selection and NWAY support here since there is no MII
|
|
* interface. However the logical operations are roughly the same,
|
|
* and the alternative is to create a fake MII interface in the driver,
|
|
* which is harder to do.
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include "miidevs.h"
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/dc/if_dcreg.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
#define DC_SETBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) | x)
|
|
|
|
#define DC_CLRBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) & ~x)
|
|
|
|
#define MIIF_AUTOTIMEOUT 0x0004
|
|
|
|
/*
|
|
* This is the subsystem ID for the built-in 21143 ethernet
|
|
* in several Compaq Presario systems. Apparently these are
|
|
* 10Mbps only, so we need to treat them specially.
|
|
*/
|
|
#define COMPAQ_PRESARIO_ID 0xb0bb0e11
|
|
|
|
static int dcphy_probe(device_t);
|
|
static int dcphy_attach(device_t);
|
|
|
|
static device_method_t dcphy_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, dcphy_probe),
|
|
DEVMETHOD(device_attach, dcphy_attach),
|
|
DEVMETHOD(device_detach, mii_phy_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static devclass_t dcphy_devclass;
|
|
|
|
static driver_t dcphy_driver = {
|
|
"dcphy",
|
|
dcphy_methods,
|
|
sizeof(struct mii_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(dcphy, miibus, dcphy_driver, dcphy_devclass, 0, 0);
|
|
|
|
static int dcphy_service(struct mii_softc *, struct mii_data *, int);
|
|
static void dcphy_status(struct mii_softc *);
|
|
static void dcphy_reset(struct mii_softc *);
|
|
static int dcphy_auto(struct mii_softc *);
|
|
|
|
static const struct mii_phy_funcs dcphy_funcs = {
|
|
dcphy_service,
|
|
dcphy_status,
|
|
dcphy_reset
|
|
};
|
|
|
|
static int
|
|
dcphy_probe(device_t dev)
|
|
{
|
|
struct mii_attach_args *ma;
|
|
|
|
ma = device_get_ivars(dev);
|
|
|
|
/*
|
|
* The dc driver will report the 21143 vendor and device
|
|
* ID to let us know that it wants us to attach.
|
|
*/
|
|
if (ma->mii_id1 != DC_VENDORID_DEC ||
|
|
ma->mii_id2 != DC_DEVICEID_21143)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Intel 21143 NWAY media interface");
|
|
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
dcphy_attach(device_t dev)
|
|
{
|
|
struct mii_softc *sc;
|
|
struct dc_softc *dc_sc;
|
|
device_t brdev;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
mii_phy_dev_attach(dev, MIIF_NOISOLATE | MIIF_NOMANPAUSE,
|
|
&dcphy_funcs, 0);
|
|
|
|
/*PHY_RESET(sc);*/
|
|
dc_sc = sc->mii_pdata->mii_ifp->if_softc;
|
|
CSR_WRITE_4(dc_sc, DC_10BTSTAT, 0);
|
|
CSR_WRITE_4(dc_sc, DC_10BTCTRL, 0);
|
|
|
|
brdev = device_get_parent(sc->mii_dev);
|
|
switch (pci_get_subdevice(brdev) << 16 | pci_get_subvendor(brdev)) {
|
|
case COMPAQ_PRESARIO_ID:
|
|
/* Example of how to only allow 10Mbps modes. */
|
|
sc->mii_capabilities = BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX;
|
|
break;
|
|
default:
|
|
if (dc_sc->dc_pmode == DC_PMODE_SIA)
|
|
sc->mii_capabilities =
|
|
BMSR_ANEG | BMSR_10TFDX | BMSR_10THDX;
|
|
else
|
|
sc->mii_capabilities =
|
|
BMSR_ANEG | BMSR_100TXFDX | BMSR_100TXHDX |
|
|
BMSR_10TFDX | BMSR_10THDX;
|
|
break;
|
|
}
|
|
|
|
sc->mii_capabilities &= sc->mii_capmask;
|
|
device_printf(dev, " ");
|
|
mii_phy_add_media(sc);
|
|
printf("\n");
|
|
|
|
MIIBUS_MEDIAINIT(sc->mii_dev);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
dcphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
|
|
{
|
|
struct dc_softc *dc_sc;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int reg;
|
|
u_int32_t mode;
|
|
|
|
dc_sc = mii->mii_ifp->if_softc;
|
|
|
|
switch (cmd) {
|
|
case MII_POLLSTAT:
|
|
break;
|
|
|
|
case MII_MEDIACHG:
|
|
/*
|
|
* If the interface is not up, don't do anything.
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
break;
|
|
|
|
mii->mii_media_active = IFM_NONE;
|
|
mode = CSR_READ_4(dc_sc, DC_NETCFG);
|
|
mode &= ~(DC_NETCFG_FULLDUPLEX | DC_NETCFG_PORTSEL |
|
|
DC_NETCFG_PCS | DC_NETCFG_SCRAMBLER | DC_NETCFG_SPEEDSEL);
|
|
|
|
switch (IFM_SUBTYPE(ife->ifm_media)) {
|
|
case IFM_AUTO:
|
|
/*PHY_RESET(sc);*/
|
|
(void)dcphy_auto(sc);
|
|
break;
|
|
case IFM_100_TX:
|
|
PHY_RESET(sc);
|
|
DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
|
|
mode |= DC_NETCFG_PORTSEL | DC_NETCFG_PCS |
|
|
DC_NETCFG_SCRAMBLER;
|
|
if ((ife->ifm_media & IFM_FDX) != 0)
|
|
mode |= DC_NETCFG_FULLDUPLEX;
|
|
else
|
|
mode &= ~DC_NETCFG_FULLDUPLEX;
|
|
CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
|
|
break;
|
|
case IFM_10_T:
|
|
DC_CLRBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
|
|
DC_CLRBIT(dc_sc, DC_10BTCTRL, 0xFFFF);
|
|
if ((ife->ifm_media & IFM_FDX) != 0)
|
|
DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3D);
|
|
else
|
|
DC_SETBIT(dc_sc, DC_10BTCTRL, 0x7F3F);
|
|
DC_SETBIT(dc_sc, DC_SIARESET, DC_SIA_RESET);
|
|
DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
|
|
mode &= ~DC_NETCFG_PORTSEL;
|
|
mode |= DC_NETCFG_SPEEDSEL;
|
|
if ((ife->ifm_media & IFM_FDX) != 0)
|
|
mode |= DC_NETCFG_FULLDUPLEX;
|
|
else
|
|
mode &= ~DC_NETCFG_FULLDUPLEX;
|
|
CSR_WRITE_4(dc_sc, DC_NETCFG, mode);
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
break;
|
|
|
|
case MII_TICK:
|
|
/*
|
|
* Is the interface even up?
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
return (0);
|
|
|
|
/*
|
|
* Only used for autonegotiation.
|
|
*/
|
|
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
|
|
break;
|
|
|
|
reg = CSR_READ_4(dc_sc, DC_10BTSTAT);
|
|
if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
|
|
break;
|
|
|
|
/*
|
|
* Only retry autonegotiation every 5 seconds.
|
|
*
|
|
* Otherwise, fall through to calling dcphy_status()
|
|
* since real Intel 21143 chips don't show valid link
|
|
* status until autonegotiation is switched off, and
|
|
* that only happens in dcphy_status(). Without this,
|
|
* successful autonegotiation is never recognised on
|
|
* these chips.
|
|
*/
|
|
if (++sc->mii_ticks <= 50)
|
|
break;
|
|
|
|
sc->mii_ticks = 0;
|
|
dcphy_auto(sc);
|
|
|
|
break;
|
|
}
|
|
|
|
/* Update the media status. */
|
|
PHY_STATUS(sc);
|
|
|
|
/* Callback if something changed. */
|
|
mii_phy_update(sc, cmd);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
dcphy_status(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
int reg, anlpar, tstat = 0;
|
|
struct dc_softc *dc_sc;
|
|
|
|
dc_sc = mii->mii_ifp->if_softc;
|
|
|
|
mii->mii_media_status = IFM_AVALID;
|
|
mii->mii_media_active = IFM_ETHER;
|
|
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
return;
|
|
|
|
reg = CSR_READ_4(dc_sc, DC_10BTSTAT);
|
|
if (!(reg & DC_TSTAT_LS10) || !(reg & DC_TSTAT_LS100))
|
|
mii->mii_media_status |= IFM_ACTIVE;
|
|
|
|
if (CSR_READ_4(dc_sc, DC_10BTCTRL) & DC_TCTL_AUTONEGENBL) {
|
|
/* Erg, still trying, I guess... */
|
|
tstat = CSR_READ_4(dc_sc, DC_10BTSTAT);
|
|
if ((tstat & DC_TSTAT_ANEGSTAT) != DC_ASTAT_AUTONEGCMP) {
|
|
if ((DC_IS_MACRONIX(dc_sc) || DC_IS_PNICII(dc_sc)) &&
|
|
(tstat & DC_TSTAT_ANEGSTAT) == DC_ASTAT_DISABLE)
|
|
goto skip;
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
if (tstat & DC_TSTAT_LP_CAN_NWAY) {
|
|
anlpar = tstat >> 16;
|
|
if (anlpar & ANLPAR_TX_FD &&
|
|
sc->mii_capabilities & BMSR_100TXFDX)
|
|
mii->mii_media_active |= IFM_100_TX | IFM_FDX;
|
|
else if (anlpar & ANLPAR_T4 &&
|
|
sc->mii_capabilities & BMSR_100T4)
|
|
mii->mii_media_active |= IFM_100_T4 | IFM_HDX;
|
|
else if (anlpar & ANLPAR_TX &&
|
|
sc->mii_capabilities & BMSR_100TXHDX)
|
|
mii->mii_media_active |= IFM_100_TX | IFM_HDX;
|
|
else if (anlpar & ANLPAR_10_FD)
|
|
mii->mii_media_active |= IFM_10_T | IFM_FDX;
|
|
else if (anlpar & ANLPAR_10)
|
|
mii->mii_media_active |= IFM_10_T | IFM_HDX;
|
|
else
|
|
mii->mii_media_active |= IFM_NONE;
|
|
if (DC_IS_INTEL(dc_sc))
|
|
DC_CLRBIT(dc_sc, DC_10BTCTRL,
|
|
DC_TCTL_AUTONEGENBL);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* If the other side doesn't support NWAY, then the
|
|
* best we can do is determine if we have a 10Mbps or
|
|
* 100Mbps link. There's no way to know if the link
|
|
* is full or half duplex, so we default to half duplex
|
|
* and hope that the user is clever enough to manually
|
|
* change the media settings if we're wrong.
|
|
*/
|
|
if (!(reg & DC_TSTAT_LS100))
|
|
mii->mii_media_active |= IFM_100_TX | IFM_HDX;
|
|
else if (!(reg & DC_TSTAT_LS10))
|
|
mii->mii_media_active |= IFM_10_T | IFM_HDX;
|
|
else
|
|
mii->mii_media_active |= IFM_NONE;
|
|
if (DC_IS_INTEL(dc_sc))
|
|
DC_CLRBIT(dc_sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
|
|
return;
|
|
}
|
|
|
|
skip:
|
|
if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_SPEEDSEL)
|
|
mii->mii_media_active |= IFM_10_T;
|
|
else
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
if (CSR_READ_4(dc_sc, DC_NETCFG) & DC_NETCFG_FULLDUPLEX)
|
|
mii->mii_media_active |= IFM_FDX;
|
|
else
|
|
mii->mii_media_active |= IFM_HDX;
|
|
}
|
|
|
|
static int
|
|
dcphy_auto(struct mii_softc *mii)
|
|
{
|
|
struct dc_softc *sc;
|
|
|
|
sc = mii->mii_pdata->mii_ifp->if_softc;
|
|
|
|
DC_CLRBIT(sc, DC_NETCFG, DC_NETCFG_PORTSEL);
|
|
DC_SETBIT(sc, DC_NETCFG, DC_NETCFG_FULLDUPLEX);
|
|
DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
|
|
if (mii->mii_capabilities & BMSR_100TXHDX)
|
|
CSR_WRITE_4(sc, DC_10BTCTRL, 0x3FFFF);
|
|
else
|
|
CSR_WRITE_4(sc, DC_10BTCTRL, 0xFFFF);
|
|
DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
|
|
DC_SETBIT(sc, DC_10BTCTRL, DC_TCTL_AUTONEGENBL);
|
|
DC_SETBIT(sc, DC_10BTSTAT, DC_ASTAT_TXDISABLE);
|
|
|
|
return (EJUSTRETURN);
|
|
}
|
|
|
|
static void
|
|
dcphy_reset(struct mii_softc *mii)
|
|
{
|
|
struct dc_softc *sc;
|
|
|
|
sc = mii->mii_pdata->mii_ifp->if_softc;
|
|
|
|
DC_CLRBIT(sc, DC_SIARESET, DC_SIA_RESET);
|
|
DELAY(1000);
|
|
DC_SETBIT(sc, DC_SIARESET, DC_SIA_RESET);
|
|
}
|